FUNAI Blu ray Player MBP5130 F7 User Manual

Owner’s Manual

MBP5130/F7

Blu-ray Disc / DVD Player

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO-TV INTERFERENCE

IMPORTANT COPYRIGHT INFORMATION

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses,

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more

of the following measures:

Unauthorized copying, broadcasting, public

performance and lending of discs are prohibited.

This item incorporates copy protection

technology that is protected by U.S. patents

and other intellectual property rights of

Rovi Corporation. Reverse engineering and

disassembly are prohibited.

Do not place the unit on the furniture that is

capable of being tilted by a child and an adult

leaning, pulling, standing or climbing on it. A

falling unit can cause serious injury or even

death.

This apparatus should not be placed in a built-in

installation such as a bookcase or rack unless

proper ventilation is provided.

Make sure to leave a space of 3.9 inches (10cm)

or more around this apparatus.

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the

equipment and receiver.

To Avoid the Hazards of Electrical Shock and

Fire

3) Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

• Do not handle the AC power cord with wet

hands.

4) Consult the dealer or an experienced radio/

TV technician for help.

• Do not pull on the AC power cord when

disconnecting it from an AC outlet. Grasp it by

the plug.

• Do not put your fingers or objects into the unit.

Location and Handling

• Do not install the unit in direct sunlight, near

strong magnetic fields, or in a place subject to

dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable

position. Do not place anything directly on

top or bottom of the unit. Depending on your

external devices, noise or disturbance of the

picture and/or sound may be generated if the

unit is placed too close to them. In this case,

please ensure enough space between the

external devices and the unit.

• Depending on the environment, the

temperature of this unit may increase slightly.

This is not a malfunction.

• Be sure to remove the disc and unplug the AC

power cord from the outlet before carrying the

unit.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

Disconnect the mains plug to shut off when find

trouble or not in use. The mains plug shall remain

readily operable.

CAUTION: Danger of explosion if battery is

incorrectly replaced. Replace only

with the same or equivalent type.

WARNING: Batteries (Battery pack or battery

installed) shall not be exposed to

excessive heat such as sunshine,

fire, or the like.

LASER SAFETY

This apparatus employs a laser. Only a qualified

service person should remove the cover or

attempt to service this apparatus, due to possible

eye injury.

CAUTION: Use of controls or adjustments or

performance of procedures other

than those specified herein may

result in hazardous radiation

exposure.

Dew Condensation Warning

• Dew condensation may form inside the unit in

the following conditions. If so, do not use this

unit at least for a few hours until its inside gets

dry.

CAUTION: Laser radiation when open. Do not

stare into beam.

LOCATION: Inside, near the BD mechanism.

- The unit is moved from a cold place to a warm

place.

- Under conditions of high humidity.

- After heating a cold room.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note about Recycling

• This unit’s packaging materials are recyclable

and can be reused. Please dispose

of any materials in accordance with

your local recycling regulations.

• Batteries should never be thrown

away or incinerated but disposed

of in accordance with your local regulations

concerning chemical wastes.

reproduced, copied, transmitted, disseminated,

transcribed, downloaded or stored in any storage

medium, in any form or for any purpose without

the express prior written consent of Funai.

Furthermore, any unauthorized commercial

distribution of this manual or any revision hereto

is strictly prohibited.

Notice for Progressive Scan Output

Information in this document is subject to change

without notice. Funai reserves the right to change

the content herein without the obligation to

notify any person or organization of such changes.

with the design is a registered trademark of

Funai Electric Co., Ltd. and may not be used in any way

without the express written consent of Funai. All other

trademarks used herein remain the exclusive property

of their respective owners. Nothing contained in this

manual should be construed as granting, by implication

or otherwise, any license or right to use any of the

trademarks displayed herein. Misuse of any trademarks

or any other content in this manual is strictly prohibited.

Funai shall aggressively enforce its intellectual property

rights to the fullest extent of the law.

• Consumers should note that not all high

definition television sets are fully compatible

with this product and may cause artifacts to

be displayed in the picture. In case of picture

problems with 480 progressive scan output,

it is recommended that the user switch the

connection to the ‘standard definition’output.

If there are questions regarding your TV set

compatibility with this 480p BD/DVD player,

please contact our customer service center.

ENERGY STAR® is a joint program of

the U.S. Environmental Protection

Agency and the U.S. Department of

Energy helping us all save money

and protect the environment

through energy efficient products

and practices.

Supplied Accessories

• Remote Control (NB904UD/NB954UD)

• Batteries (AAA, 1.5V × 2)

• Audio / video cables

• Quick Start Guide

• Wireless Network Connection Guide

• VUDU sheet

• Netflix Box-insert

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching Streaming Movies ..........................................25

Blockbuster Operations.......................................................26

Before Activating the Connection to

Blockbuster...........................................................................26

Activating the Connection to Blockbuster................26

Guide to Blockbuster Menu Screen .............................26

Renting or Purchasing Movies / TV Episodes...............26

Searching Movies / TV Episodes....................................27

Watching Rented or Purchased Movies /

TV Episodes...........................................................................27

VUDU Operations...................................................................27

Before Activating VUDU...................................................27

Activating VUDU.................................................................27

Guide to VUDU Menu Screen.........................................28

Renting or Purchasing VUDU Movies /

TV Episodes...........................................................................28

Watching Rented or Purchased VUDU Movies / TV

Episodes.................................................................................29

Using Internet Applications ...............................................29

FUNCTION SETUP..........................................................29

Quick......................................................................................29

Custom..................................................................................30

Language ..........................................................................30

Video....................................................................................30

Audio ..................................................................................31

HDMI Audio Out Setting..................................................32

Digital Out Setting .............................................................32

Speaker Setting (Available when you have HDMI

cable connected to HDMI OUT jack) ...........................33

Parental................................................................................35

Others ...............................................................................36

fun-Link (HDMI CEC)..........................................................38

Network Connection ............................................................39

Connection Test ..................................................................39

Network Selection..............................................................39

Software Update.................................................................43

Current Version....................................................................43

Initialize .....................................................................................44

OTHERS .............................................................................45

Troubleshooting.....................................................................45

Language Code List...............................................................48

Servicing ...................................................................................48

Specifications ..........................................................................49

NETWORK SERVICE DISCLAIMER .............................49

Network Service Disclaimer ...............................................49

ESPAÑOL...........................................................................50

Discos Reproducibles ...........................................................50

Discos y Archivos Reproducibles ..................................50

Códigos de Región.............................................................50

Encontrar el Canal de Vídeo en su Televisor.................50

Ajusta el idioma para el menú del

CONTENTS

INTRODUCTION................................................................2

Safety Instructions................................................................... 2

Supplied Accessories.............................................................. 4

Trademark Information.......................................................... 6

Front Panel ................................................................................. 7

Rear Panel................................................................................... 7

Remote Control ........................................................................ 8

Installing the Batteries in the Remote Control.............. 9

Opening Screen........................................................................ 9

CONNECTIONS ...............................................................10

Connection to the TV............................................................10

Connection to an Audio System.......................................11

2-Channel Analog Audio Connection.........................11

Digital Audio Connection................................................11

HDMI Audio Connection..................................................11

Connection to the Network ...............................................12

Wired Connection..................................................................12

Wireless Connection.............................................................13

Finding the Video Channel on Your TV...........................13

PLAYBACK.........................................................................14

Information on Playback.....................................................14

Playable Discs and Files....................................................14

Unplayable Discs and Files..............................................14

Region Codes.......................................................................15

On-Screen Display..............................................................15

How to Insert a Disc ..............................................................15

Reading the SD Memory Card...........................................16

Selecting the Media Mode .................................................16

Playing Back (BD / DVD/ Disc with AVCHD Files)........16

Using the Title / Disc / Pop-up Menu..............................17

Playing Back (Audio CD / Windows Media ^TMAudio /

JPEG Files).................................................................................17

KODAK Picture CD .................................................................18

Fast Forward / Fast Reverse................................................19

Slow Forward Playback........................................................19

Step by Step Playback..........................................................19

Repeat Playback .....................................................................19

Program Playback..................................................................19

Random Playback ..................................................................20

Rapid Playback........................................................................21

Adjusting the Picture............................................................21

Virtual Surround.....................................................................21

PIP (BONUSVIEW) Setting ...................................................22

Camera Angle..........................................................................22

Enjoying BD-Live Discs with Internet .............................22

Search.........................................................................................23

Using [the Number buttons] (Direct Search) ...............23

Switching Subtitles................................................................23

Switching Audio Soundtrack.............................................24

Setting the BD Audio Mode ...............................................24

NETWORK OPERATIONS..............................................25

Netflix Operations..................................................................25

Before Activating the Connection to Netflix ............25

Activating the Connection to Netflix...........................25

reproductor..............................................................................50

Reproducción Directa...........................................................51

LIMITED WARRANTY....................................back cover

Download from Www.Somanuals.com. All Manuals Search And Download.

Trademark Information

“AVCHD”and the

“AVCHD”logo

are trademarks

of Panasonic

HDMI, the HDMI Logo,

and High-Definition

Multimedia Interface are

trademarks or registered

trademarks of HDMI

Licensing LLC in the

United States and other

countries.

Corporation and

Sony Corporation.

“BONUSVIEW”is

trademark of Blu-ray

Disc Association.

Manufactured under

license from Dolby

Laboratories. Dolby and

the double-D symbol

are trademarks of Dolby

Laboratories.

"BD-Live" and

"BD-Live" logo are

trademarks of Blu-ray

Disc Association.

VUDU^TMis a

trademark of VUDU,

Inc.

Manufactured under

license under U.S.

Patent #’s:5,451,942;

5,956,674; 5,974,380;

5,978,762; 6,487,535

& other U.S. and

worldwide patents

issued & pending. DTS

and the Symbol are

registered trademarks,

& DTS-HD, DTS-HD

Advanced Digital Out

and the DTS logos are

trademarks of DTS,

Inc. Product includes

software. © DTS, Inc. All

Rights Reserved.

Netflix and the

Netflix logo

are trademarks

or registered

trademarks of Netflix,

Inc.

BLOCKBUSTER name,

design and related

marks are trademarks

of Blockbuster Inc.

Java and all Java based

trademarks and logos

are trademarks or

registered trademarks

of Oracle and/or its

affiliates.

“Blu-ray Disc“ and

are trademarks.

is a trademark of DVD Format/Logo Licensing

Corporation.

Windows Media and

the Windows logo

are trademarks or

registered trademarks

of Microsoft

Kodak and KODAK Picture CD

Compatible are trademarks

of Kodak used under license.

Corporation in the

United States and/or

other countries.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel

4 5 6* 7 8

STANDBY/ON

OPEN/CLOSE

STOP

PLAY

SD card

(*) The unit can also be turned on by pressing

these buttons.

1. Disc tray

8. y STANDBY/ON button

2. A OPEN/CLOSE button*

3. Infrared sensor window

4. C STOP button

• Press to turn on the unit, or to turn the unit

into the standby mode. (To completely turn

off the unit, you must unplug the AC power

cord.)

5. PLAY indicator

• This indicator lights up in green when discs or

SD cards play back.

• Press and hold for 10 seconds to shut down

the unit.

9. SD card slot

6. B PLAY button*

7. STANDBY/ON indicator

• This indicator lights up in red when the power

is in the standby mode.

Note

• This unit will be turned into the standby mode

automatically after 25 minutes of no action.

Rear Panel

4 5

COAXIAL

Wireless LAN

LAN

HDMIOUT

AUDIO

OUT

VIDEO

OUT

1. AC power cord

2. LAN terminal

Note

• Do not touch the inner pins of the jacks on the

rear panel. Electrostatic discharge may cause

permanent damage to the unit.

• This unit does not have the RF modulator.

• Do not try to rip the internal wireless LAN from

the unit.

3. HDMI OUT jack

4. AUDIO OUT jacks

5. DIGITAL OUT (COAXIAL) jack

6. Wireless LAN (Internal)

7. VIDEO OUT jack

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

8. H (skip) button

• During playback, press once to return to the

beginning of the current title, chapter or

track.

• During playback, press twice to return to the

previous title, chapter or track.

• During the JPEG playback, press to return to

the previous file.

STANDBY/ON

13*

9. C (stop) button

• Press to stop playback.

10. Number buttons

• Press to enter the title, chapter, track or file

number.

• Press to enter values in the input field.

11. SEARCH button

• Press to display the search menu.

12. REPEAT button

• Press to toggle between various repeat

modes.

13. OPEN/CLOSE A button*

• Press to open or close the disc tray.

14. POP MENU / MENU button

• Press to display the pop-up menu / disc

menu.

15. OK button

• Press to confirm or select menu items.

16. RETURN button

• Press to return to the previously displayed

menu screen.

17. D (forward) button

• During playback, press to fast forward the

playback.

• In pause mode, press to slow forward the

playback.

18. G (skip) button

• During playback, press to skip to the next

title, chapter, track or file.

19. F (pause) button

(*) The unit can also be turned on by pressing

these buttons.

• Press to pause playback.

• When playback is in pause mode, press

repeatedly to forward the playback step by

step.

1. STANDBY/ON y button

• Press to turn on the unit, or to turn the unit

into the standby mode. (To completely turn

off the unit, you must unplug the AC power

cord.)

20. DISPLAY button

• Press to display the on-screen display menu.

21. ANGLE button

2. RED / GREEN / BLUE / YELLOW button

• Press to select items on some BD menus.

• When file list / thumbnail list is shown, press

to switch between pages.

• Press to access various camera angles on the

disc.

• Press to rotate the JPEG files clockwise by 90

degrees.

3. TOP MENU button

22. SUBTITLE button

• Press to display the top menu.

• During Netflix / Blockbuster / VUDU feature

screen is displayed (except during playback),

press to exit.

• Press to display the subtitle menu.

23. AUDIO button

• Press to display the audio menu.

4. K/ L/s/B buttons

• Press to select items or settings.

5. SETUP button

• Press to display or to exit the setup menu.

6. E (reverse) button

• During playback, press to fast reverse the

playback.

7. B (play) button*

• Press to start playback or resume playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

24. MODE button

Opening Screen

• During BD or DVD or AVCHD files playback,

press to display the setting for the rapid

playback and the picture adjustment.

• During BD, DVD and CD playback, press to

display the setting for the virtual surround.

• During BD playback, press to turn the picture-

in-picture feature on or off (only applicable to

BD-video which supports the PIP function).

• During the JPEG playback, press to display

menus for changing the visual effect for

switching the image or changing the size of

the image.

In stop mode, opening screen is displayed.

Watch HD movies

• In stop mode with audio CD or WMA / JPEG

files inserted, press to display menus for

program and random playback.

“VUDU”:

To access the VUDU App Home

screen

• In stop mode with BD inserted, press to

display a menu for setting the BD audio

mode.

“NETFLIX“:

To access the Netflix screen

“BLOCKBUSTER“: To access the Blockbuster

25. CLEAR button

menu screen

• Press to clear the information once entered or

to cancel the programming for audio CD, etc.

Installing the Batteries in the Remote Control

Install AAA (1.5V) battery × 2 matching the

polarity indicated inside battery compartment of

the remote control.

Note

Incorrect use of batteries can result in hazards

such as leakage and bursting. Please observe

the following:

• Do not mix alkaline, standard (carbon-zinc), or

rechargeable (ni-cad, ni-mh, etc) batteries.

• Do not mix new and old batteries together.

• Do not use different kinds of batteries together.

Although they may look similar, different

batteries may have different voltages.

• Make sure that the + and - ends of each

battery match the indications in the battery

compartment.

• Remove batteries from battery compartment

that are not going to be used for a month or

more.

• When disposing of used batteries, please

comply with governmental regulations or

environmental public rules that apply in your

country or area.

• Do not recharge, short-circuit, heat, burn or

disassemble batteries.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS

Connection to the TV

HDMI Video / Audio Connection

(Supports up to 1080i / 1080p, 1080p24 resolution.)

Your TV

COAXIAL

Wireless LAN

LAN

HDMIOUT

AUDIO

OUT

VIDEO

OUT

HDMI IN

HDMI cable(not supplied)

HDMIOUT

• No analog audio connection required.

• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.

• High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for optimal

compatibility.

Picture is not displayed on the TV screen ...

The indicators blink under the following conditions.

• When the connected device does not support HDCP.

• When the connected device is recognized as an HDCP incompatible by HDMI SRM.

• When the connected device supports HDCP but cannot be recognized as an HDCP compatible for

some reason.

The indicators blink as follows for 30 seconds.

STANDBY/ON

STOP

PLAY

SD card

Standard Video + Standard Audio Connection

(Supports only 480i resolution.)

Your TV

COAXIAL

Wireless LAN

LAN

HDMIOUT

AUDIO

OUT

VIDEO

OUT

VIDEO IN

AUDIO IN

Video cable(supplied)

Audio cable(supplied)

AUDIO

OUT

VIDEO

OUT

• Connect this unit directly to the TV. If the audio / video cables are connected to a VCR, pictures may be

distorted due to the copy right protection system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to an Audio System

• When you change the connections, all devices should be turned off.

• Refer to the manual accompanying external devices for more information.

2-Channel Analog Audio Connection

stereo system

Digital Audio Connection

AV receiver/ampliﬁer

AUDIO IN

DIGITAL AUDIO INPUT

COAXIAL

Analog audio input jacks

Digital audio coaxial

input jack

Digital audio cable

(not supplied)

Audio cable

(supplied)

COAXIAL

Wireless LAN

LAN

HDMIOUT

LAN

HDMIOUT

AUDIO

OUT

VIDEO

OUT

AUDIO

OUT

VIDEO

OUT

AUDIO

OUT

AUDIO OUT

DIGITAL OUT (COAXIAL)

To set up “Digital Out”, refer to page 32.

HDMI Audio Connection

AV receiver/ampliﬁer with an HDMI input jack

COAXIAL

HDMI IN

Wireless LAN

HDMI cable

(not supplied)

LAN

HDMIOUT

AUDIO

OUT

VIDEO

OUT

HDMIOUT

To set up “HDMI Audio Out”, refer to page 31.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to the Network

By connecting this unit to the Internet, you can access Netflix, Blockbuster and VUDU services and

applications, BD-Live features on a Blu-ray Disc and perform network update.

- For more information about software update, refer to “Network Update”on page 44.

- For more information about BD-Live, refer to “Enjoying BD-Live Discs with Internet”on page 22.

- For more information about Netflix, refer to “Netflix Operations”on page 25.

- For more information about Blockbuster, refer to “Blockbuster Operations”on page 26.

- For more information about VUDU, refer to“VUDU Operations”on page 27.

Note

• Wired connection is recommended when using following features. (Using following features with

wireless connection can be affected by other devices using radio frequencies.)

- Video streaming services (Netflix, Blockbuster or VUDU)

- Network update

Wired Connection

Make the following connection if you are using a wired router.

Hub or broadband router

Networking equipment

(modem,etc.)

WAN

LAN

LAN cable(not supplied)

Internet

LAN

COAXIAL

Wireless LAN

LAN

HDMIOUT

AUDIO

OUT

VIDEO

OUT

Note

• After you made a wired connection, set up necessary network settings. (For network setting of wired

connection, refer to “Wired”on page 39.)

• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.

• If your network equipment (modem, etc.) does not have broadband router functions, connect a wired

broadband router.

• If your network equipment (modem, etc.) has broadband router functions but there is no vacant port,

use a hub.

• For a wired broadband router, use a router which supports 10BASE-T/100BASE-TX.

• Do not connect your PC directly to the LAN terminal of this unit.

• Please purchase shielded LAN cables at your local store and use them when you connect to network

equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

Wireless Connection

Make the following connection if you are using a wireless router.

Networking equipment

COAXIAL

(modem,etc.)

Wireless LAN

LAN

HDMIOUT

AUDIO

OUT

VIDEO

OUT

Internet

LAN

WAN

Hub or wireless broadband router

LAN cable(not supplied)

Note

• After you made the wireless connection, set up necessary network settings.

(For network setting of wireless connection, refer to “Wireless”on page 41.)

• For a wireless router, use a router which supports IEEE 802.11 b/g/n.

(n is recommended for stable operation of the wireless network.)

• Set the wireless router to Infrastructure mode. This unit does not support Ad-hoc mode.

• Other radio devices or obstacles may cause interference to the wireless network connection.

Finding the Video Channel on Your TV

After you have completed all the connections, you must find the correct video channel (external input

channel) on your TV.

1 After you have made all the necessary connections, press [STANDBY/ON y ] to turn on the unit.

2 Turn on your TV.

3 Press the button on the TV’s remote control that accesses the external input channel. It may be

labeled “SOURCE”, “AV” or “SELECT” (refer to your TV’s user manual).

Watch HD movies

Note

• If the TV is connected by an HDMI cable, it may take a while for the opening picture to come up.

Download from Www.Somanuals.com. All Manuals Search And Download.

• This unit does not support miniSDHC and

microSDHC Memory Card.

PLAYBACK

• For miniSD Card and microSD Card, an adapter

is necessary.

• Portions of this product are protected under

by ARIS / SOLANA / 4C.

• Please keep the SD Memory Cards in their cases

when you are not using them.

• Do not try to open or modify the card.

• Do not touch the terminal surface with your

fingers or any metals.

• Do not attach additional labels or stickers to

cards.

• Do not remove the label of the SD Memory

Cards.

• This unit recognizes up to 8 characters of file

name in the SD Memory Card. Characters after

8th will not be displayed.

Information on Playback

Before you start playing back a disc, read the

following information.

Playable Discs and Files

Playable discs

Blu-ray Disc

- BD-video (single / dual layer)

- BD-RE ver. 2.1 (single / dual layer)

(Recorded in BDMV format)

- BD-R ver. 1.1 / 1.2 / 1.3 (single / dual layer)

(Recorded in BDMV format)

(Unclosed discs may not be played back.)

DVD-video

DVD-RW

DVD-R

CD-DA (audio CD)

CD-RW

Unplayable Discs and Files

CD-R

KODAK Picture CD

DTS-CD

• CD-ROM

• CD-I (compact disc-interactive)

• DVD-RAM

• VSD (video single disc)

Playable files

Media

• DVD-audio

DVD-RW/-R

AVCHD

• Video CD

SD Memory Card

(including SDHC)

miniSD Card

• HD DVD

• SVCD

• Unfinalized disc

microSD Card

Windows Media ^TMAudio

JPEG

BD-RW/-R

• BD-RE (ver.1.0)

DVD-RW/-R

• BD-RE (ver.2.1) (Recorded in BDAV format)

• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV

format)

CD-RW/-R

SD Memory Card

(including SDHC)

miniSD Card

microSD Card

• BD that contains AVCHD files

• BD / DVD / CD / SD Memory Card contains MP3,

and DivX® files

• BD/DVD hybrid disc (played back as a BD-video

only)

• DVD-RW/-R recorded in non compatible

recording format

• Super Audio CD - Only the sound on the CD

layer can be heard. The sound on the high-

density Super Audio CD layer cannot be heard.

• Playability of dual discs are not guaranteed.

• This unit cannot play back the disc contents

protected by Windows Media™ Digital Rights

Management (DRM).

Readable cards

Playable files /

data

SD Memory Card (8 MB - 2 GB) AVCHD, Windows

SDHC Memory Card

(4 GB - 8 GB)

miniSD Card (8 MB - 2 GB)

microSD Card (8 MB - 2 GB)

Media ^TMAudio,

JPEG, picture-

in-picture

commentary,

subtitles or other

extras for BD-ROM

ver. 2 (Profile 2.0 /

Profile 1.1)

Note for SD Memory Cards

• This unit supports SD Memory Card with FAT12/

FAT16 file system, and SDHC Memory Card with

FAT32 file system.

• This unit does not support NTFS file system.

• This unit may not read SD Memory Cards

formatted on a computer. If that is the case,

please reformat the SD Memory Cards in this

unit and try again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Region Codes

 Disc information

This unit has been designed to play back BD-video

with region “A”and DVD-video with region “1”

or “ALL”. You cannot play back BD-video or DVD-

video that are labeled for other regions. Look for

the symbols on your BD-video or DVD-video.

If these region symbols do not appear on your BD-

video or DVD-video, you cannot play back the disc

in this unit. The letter or number inside the globe

refers to region of the world. A BD-video or DVD-

video labeled for a specific region can only be

played back in the unit with the same region code.

1 / 14

0 : 00: 51

1.Current track number / Total number of

tracks

2.Elapsed time (or remaining time) of the

current disc

 File name information

File_name_001

1.Media icon and file name

On-Screen Display

: WMA files

You can check information about the current disc

by pressing [DISPLAY].

To call the on-screen display menu, press

[DISPLAY] during playback. Every time you press

[DISPLAY], the information changes. Depending

on the media, available information varies.

: JPEG file

 Tag information

TITLE

 Chapter information

ARTIST NAME

1/10

1. Title name based on tag information of

current Windows Media™ Audio file

2. Artist name based on tag information of

current Windows Media™ Audio file

3 / 5

0 : 01 : 02

1.Current title number

 Decoding format information

2.Current chapter number / Total number of

chapters

3.Current repeat setting (Only when repeat

setting is active)

Dolby Digital

1.Decoding format

(C: Chapter repeat, T: Title repeat)

4.Indicates that the multi camera angle images

are available on the scene

How to Insert a Disc

1. Press [OPEN/CLOSE A] to open the disc tray.

2. Place the disc on the disc tray with its label

side facing up.

5.Current playback status

6.Elapsed time (or remaining time) of the

current chapter

 Title information

Align the disc to the disc tray guide.

3 / 5

0 : 01 : 02

• Make sure the disc is compatible with this

unit. (Refer to page 14 for the list of compatible

discs.)

1.Current title number / Total number of titles

2.Elapsed time (or remaining time) of the

current title

3. Press [OPEN/CLOSE A] to close the disc tray.

It may take a while to load the disc.

 Track / File information

To eject the disc:

1 / 14

0 : 00: 51

Press [OPEN/CLOSE A] to open the disc tray.

Remove the disc.

1.Current track (file) number / Total number of

track(file)

Press [OPEN/CLOSE A] to close the disc tray.

2.Elapsed time (or remaining time) of the

current track (except for JPEG files)

3.Indication of SD Memory Card playback

4.Current repeat setting

(Only when repeat setting is active)

(T: Track repeat, G: Group repeat,A: All

repeat)

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Media Mode

Reading the SD Memory Card

For the playback media to be read by this unit, the

correct media mode should be selected. You can

switch the media mode by following the steps

below.

You can play back the AVCHD / WMA / JPEG files in

an SD Memory Card.

With the SD Memory Card, you can also enjoy the

following functions.

- Special additional contents for BD-ROM Profile 1

ver.1.1. (For more information about the special

additional contents, refer to the instruction book

that came with the disc.)

1. In stop mode, press [SETUP].

2. Use [K/L] to select , then press [OK] .

3. Use [K/L] to select “Mode Select”, then press

[OK].

- BD-Live function (BD-ROM ver. 2 Profile 2.0). (For

more information about BD-Live, refer to page 22.)

Quick

1. Insert an SD Memory Card, with the label

side facing up, into the SD card slot until it

clicks.

Mode Select

HDMI Audio Out

HDMI Video Resolution Auto

Player Menu

Disc

HDMI Multi(Normal)

• If no disc is in operation, “Media Select”

screen will appear on the TV screen.

English

Wired

Network Selection

2. Use [K/L] to select “SD Card”, then press

[OK].

3. Use [K/L] to select a desired track, folder

or file, then press [OK]. Use [s/B] to

go backward and forward between the

hierarchies.

4. Use [K/L] to select the desired media mode,

then press [OK].

5. Press [SETUP] to exit.

• Selected media mode is now activated.

• If you press [OK] on the desired file, playback

will start.

Even if you turn the unit to the standby mode in

“SD Card”or “Network”mode, it will be in “Disc”

mode the next time you turn it on.

To remove the SD Memory Card:

In stop mode, gently push in the SD Memory

Card, then pull it out slowly.

Note

Playing Back (BD / DVD/ Disc with AVCHD

Files)

• The “Media Select”screen will disappear under

the conditions listed below:

1. Press [STANDBY/ON y ].

- when the screen saver is activated.

- when [RETURN] is pressed.

2. Turn on the TV and select the appropriate

input on the TV to which the unit is

connected.

- when the setup menu is called up.

• If the “Media Select”screen disappears before

you make the selection, refer to “Selecting the

Media Mode”on page 16.

3. Insert a disc (refer to “How to Insert a Disc”

on page 15 ).

4. Playback may start automatically.

If not, press [B (play)].

• Do not remove the SD Memory Card or turn the

unit to the standby mode while the contents

of the card are in playback. It may result in

malfunction or loss of the card’s data.

• Do not delete the folders or files in the SD

Memory Card with your computer. This unit

may not read SD Memory Cards formatted on a

computer.

• Some discs may show a title or a disc menu.

• For a disc with AVCHD files, title menu is

displayed.

In such case, refer to “Using the Title / Disc /

Pop-up Menu”on page 17.

To pause playback:

Press [F (pause)].

• If a folder or file name includes one of the

following unrecognizable characters, the folder

or file name may not be displayed correctly.

- Unrecognizable characters : . , “ = + [ ] ; / \ : | ¥

• For an SD Memory Card, extension other than

listed below cannot be recognized.

- WMA : “.wma”

To return to the normal playback:

Press [B (play)].

To stop playback:

Press [C (stop)].

Playback will be in Resume-On-Stop mode.

Resume-On-Stop mode

If a playback is in Resume-On-Stop mode, when

you press [B (play)] next time, the playback will

start from the point where it has been stopped.

Note

- JPEG : ".jpg"

• Resume playback may not be available for the

BD that supports Java applications (BD-Java).

Download from Www.Somanuals.com. All Manuals Search And Download.

• In the “Disc”mode, the resume information will

be cleared when;

Note

• Contents of menus and corresponding menu

operations may vary among discs. Refer to the

manual accompanying the disc for details.

• Title menu is also available for SD card with

AVCHD files.

- [C (stop)] is pressed while in the Resume-On-

Stop mode.

- the parental level is changed.

- the disc tray is opened.

• In the “SD Card”mode, the resume information

will be cleared when;

Playing Back (Audio CD / Windows Media ^TM

Audio / JPEG Files)

- [C (stop)] is pressed while in the Resume-On-

Stop mode.

Before you begin, make sure the correct media

mode is selected. Refer to “Selecting the Media

Mode”on page 16.

- the SD Memory Card is removed.

- the unit is turned into the standby mode.

Note

1. Insert an audio CD or a disc/card with WMA /

JPEG files.

may appear at the top-right on the TV screen

when the operation is prohibited by the disc or

this unit.

•

2. Use [K/L] to select a desired track, folder or

file, then press [OK]. Use [s/B] to go back

and forward between the hierarchies (only

for WMA/JPEG files).

• During the playback of 2-layered disc, pictures

may stop for a moment. This happens when the

1st layer switches to the 2nd layer. This is not a

malfunction.

• If you press [OK] on the desired file, playback

will start.

• The operation may vary when you play back

BD-videos, DVD-videos or AVCHD files with disc

menu. Refer to the manual accompanying the

disc for details.

• If a disc contains AVCHD files, the playback of

other files on the same disc are not available. All

files on an SD Memory Card are available.

• Set “Still Mode”setting to “Field”in “Video”menu

if pictures in the pause mode are blurred. Refer

to “Still Mode”on page 30.

- - / 20

File List

JPEG_DISC

Folder_1

Folder_2

Folder_3

JPEG_A

JPEG_B

JPEG_C

JPEG_D

Page Up

Page Down

Using the Title / Disc / Pop-up Menu

audio CD:

WMA/JPEG: File information

audio CD: “CD-DA”will be displayed.

Track information

Many of BD-video and DVD-video discs contain

title menu (BD-video / DVD-video / AVCHD), disc

menu (DVD-video) or pop-up menu (BD-video)

which guides you through the available functions

in the disc. The contents of the menus may differ

depending on the discs.

WMA/JPEG: Current Disc or folder name will be

displayed.

List of the track number and time.

audio CD:

WMA/JPEG: List of the file / folder names in the

current folder / disc

Title menu (BD-video / DVD-video / AVCHD)

1. Press [TOP MENU].

Operation Press [RED] to go to the previous

2. Use [K/L/s/B] to select an item, then press

[OK].

guide:

page. Press [GREEN] to go to the next

page.

3. Press [TOP MENU] to exit.

Current page / Total page number

Playback status

Disc menu (DVD-video)

1. Press [POP MENU / MENU].

2. Use [K/L/s/B] to select an item, then press

[OK].

Icons:

Folder

3. Press [POP MENU / MENU] to exit.

Pop-up menu (BD-video)

This is a special feature available for some BD-

videos. When you press [POP MENU / MENU], a

menu pops out on the TV screen during playback.

1. During the playback of BD-video, press

[POP MENU / MENU].

audio CD tracks

WMA files

JPEG files

2. Use [K/L/s/B] to select an item, then press

[OK].

3. Press [POP MENU / MENU] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

KODAK Picture CD

3. Press [C (stop)] to stop playback.

This unit can also run JPEG files stored on KODAK

Picture CD. You can enjoy picture images on the

TV set by playing back the KODAK Picture CD. This

unit conforms to ver.7.0 of KODAK Picture CD. For

details of KODAK Picture CD, contact a shop that

provides developing service of Kodak Inc.

It is recommended that files to be played back

in this unit are recorded under the following

specifications:

• Sampling

frequency :

32 kHz, 44.1 kHz or 48 kHz

1. When KODAK Picture CD is inserted in this

unit, KODAK Picture CD menu will appear

automatically on the TV screen.

• Constant bit rate : 48 kbps - 192 kbps

<JPEG>

• Upper limit :

2,560 x 1,900 dots (sub

sampling is 4:4:4)

- - / 16

5,120 x 3,840 dots (sub

sampling is up to 4:2:2)

Thumbnail

Pictures

• Lower limit :

• File size of image

maximum :

32 x 32 dots

12 MB

Note

• Unrecognizable characters will be replaced with

asterisks.

Page Prev

Page Next

• Some unplayable folders or files may be listed

due to the recording status.

• High-resolution JPEG files take longer to be

displayed.

• Progressive JPEG files (JPEG files saved in

progressive format) cannot be played back in

this unit.

• The system can recognize up to 255 folders /

999 files for CD, 999 folders / 9,999 files for BD,

DVD and SD Memory Card.

• The 9th and deeper hierarchies cannot

be displayed for CD. The 10th and deeper

hierarchies cannot be displayed for BD, DVD

and SD Memory Card.

File information

Current page / Total page number

Operation guide: Press [BLUE] to go to the

previous page.

Press [YELLOW] to go to

the next page.

Playback status

2. Use [K/L/s/B] to select a desired file to be

played back, then press [B (play)] or [OK].

• An image will be played back from the

selected file and go to the next one in turn.

3. Press [C (stop)] to stop playback.

To return to the first item:

• For the SD Memory Card playback, refer to

“Reading the SD Memory Card”on page 16.

• Extension other than listed below cannot be

recognized.

Press [TOP MENU].

To return to the file played last:

Press [POP MENU / MENU].

Tips for JPEG / KODAK Picture CD Playback

• The selected file will be played back and go

to the next file in the current hierarchy in turn

every 10 seconds.

• Every press on [ANGLE] will turn the image

clockwise by 90 degrees when an image is

displayed.

• To change the visual effect for switching the

playback image, press [MODE] once, then use

[s/B] or [OK] to switch between “Cut In/Out”

and “Fade In/Out”.

- WMA : “.wma”

- JPEG : “.jpg”/”.jpeg”

•

With regard to the multi-border BD-RE/-R,

additionally recorded sections cannot be

recognized.

• With regard to the multi-border DVD-RW/-R,

additionally recorded sections may not be

recognized.

• If a disc contains AVCHD files, the playback of

other files on the same disc are not available. All

files on an SD Memory Card are available.

• During JPEG / KODAK Picture CD playback,

press [MODE] twice to change the size of the

playback image, then use [s/B] or [OK] to

switch between “Normal”(100 %) and “Small”

(95 %). The size change may have no effect on

some files (e.g. files with a small picture size).

Download from Www.Somanuals.com. All Manuals Search And Download.

Fast Forward / Fast Reverse

Repeat Playback

1. During playback, press [D (forward)]

repeatedly for fast forward.

During playback, press [E (reverse)]

repeatedly for fast reverse.

Every time you press [D (forward)] or

[E (reverse)], the playback speed will

change.

Available repeat functions vary depending the

discs.

1. During playback, press [REPEAT] repeatedly

to select the desired repeat mode.

Repeat mode

Chapter repeat

Available media

BD-video

DVD-video

AVCHD files

The current chapter will be

2. Press [B (play)] to return to normal

playback.

played back repeatedly.

Title repeat

BD-video

DVD-video

AVCHD files

The current title will be

Note

played back repeatedly.

• For BD and DVD and AVCHD, speed changes in

5 different levels.

Track repeat

audio CD

WMA file

• For audio CD and Windows Media ^TMAudio,

speed changes in 3 different levels.

• For audio CD, fast forward / fast reverse search

between different tracks are not available

during program and random playback.

• For Windows Media™ Audio, fast forward / fast

reverse search between different files are not

available.

The current track will be

played back repeatedly.

Group repeat

WMA file

JPEG file

The current folder will be

played back repeatedly.

All repeat

audio CD

WMA file

JPEG file

All tracks or files in the

media will be played back

repeatedly.

Slow Forward Playback

Note

1. During playback, press [F (pause)], then

• The repeat setting will be canceled when you

stop playback.

press [D (forward)].

Every time you press [D (forward)],

playback speed will change.

2. Press [B (play)] to return to normal

playback.

• The chapter, title, track or group repeat will be

cleared when moving to another chapter, title,

track / file or folder.

• Chapter and title repeat are not available with

some scenes.

• When the repeat setting is set for a WMA folder

(file), the repeat setting will be canceled if you

select other WMA folder (file) to playback.

Note

• For BD and DVD, speed changes in 3 different

levels.

• Only slow forward is available.

• Set “Still Mode”setting to “Field”in “Video”menu

if pictures in the slow forward playback mode

are blurred. Refer to “Still Mode”on page 30.

Program Playback

You can play back the disc/card in your desired

order.

Step by Step Playback

1. In stop mode, press [MODE].

2. Use [K/L] to select a track / folder / file, then

press [OK].

1. In pause mode, press [F (pause)] repeatedly.

Every time you press [F (pause)], playback

will advance one step at a time.

2. Press [B (play)] to return to normal

playback.

- - / 16

Program

CD_DA

Total

0 : 26 : 24

Note

0:36

1:14

• Only step by step forward is available.

• Set “Still Mode”setting to “Field”in “Video”menu

if pictures in step by step playback mode are

blurred. Refer to “Still Mode”on page 30.

1:14

0:45

0:50

0:53

0:20

0:54

0:50

1:14

0:50

0:53

0:54

0:36

Page Up

Page Down

Page Prev

Page Next

e.g.) audio CD

Track information

audio CD:

WMA/JPEG: File information

Download from Www.Somanuals.com. All Manuals Search And Download.

• Playback from a desired track / file and random

playback are not available during program

playback.

• Press [MODE] to switch to the random playback

mode.

audio CD:

“CD-DA”will be displayed.

WMA/JPEG: Current Disc, SD Memory

Card, or folder name will be

displayed.

Track /

Track / Folder / File list in the

Folder / File original order

list:

• The program will be cleared when;

- the unit is turned into the standby mode.

- the media mode is switched to the other

mode.

Programmed Track / File list in the

list :

Cumulative playback time of all tracks in the

programmed list (audio CD only)

Playback status

Current page / Total page number

Operation

guide:

programmed order

- the disc / card is removed. (as for “Disc”

mode, just opening the disc tray will clear the

program info.)

Random Playback

Press [RED] to go to the

previous page in the track /

file list.

This function shuffles the playback order of tracks

/ files.

1. In stop mode, press [MODE] twice.

Press [GREEN] to go to the next

page in the track / file list.

Press [BLUE] to go to the

previous page in the

programmed list.

- - / 16

Random

CD_DA

Total

1 : 13 : 29

Press [YELLOW] to go to the

next page in the programmed

list.

0:36

1:14

0:45

0:50

0:53

0:20

0:54

• For WMA/JPEG files, use [K/L] to select a folder,

then press [OK] first, and then use [K/L] to

select a file, then press [OK].

Page Down

• Press [CLEAR] to erase the last file of the

program.

• Use [K/L] to select “All Clear”at the bottom

of the list to erase all the tracks / files in the

program.

• The programmed tracks / files is displayed in

the right hand screen.

• Use [s/B] to go back / forward between the

hierarchy of folders.

audio CD:

Track information

WMA/JPEG: File information

audio CD: “CD-DA”will be displayed.

WMA/JPEG: Current Disc, SD Memory

Card, or folder name will be

displayed.

Track / File Track / File list in the original

list:

Operation

guide:

order will be displayed.

Press [RED] to go to the

previous page in the track /

file list.

3. Press [B (play)] to start program playback.

• The program playback will start.

To exit from the program playback mode:

• Press [RETURN] in stop mode.

Press [GREEN] to go to the next

page in the track / file list.

Note

Total playback time of all tracks (audio CD

only)

Playback status

• During program playback, press [C (stop)]

once to set the resume point, and then press

[B (play)] to resume program playback from

where [C (stop)] was pressed (audio CD) or

from beginning of the file where [C (stop)] was

pressed (WMA/JPEG).

2. Press [B (play)] to start random playback.

To exit from the random playback mode:

• Press [MODE] in stop mode.

• During program playback, press [C (stop)] twice

to display the program screen. To go back to the

normal program playback, press [RETURN] to

exit from the program screen, then press

[B (play)].

Note

• During the random playback, press [C (stop)]

once to set the resume point, and then press

[B (play)] to resume random playback from

where [C (stop)] was pressed (audio CD) or

from beginning of the file where [C (stop)] was

pressed (WMA/JPEG).

• Up to 99 tracks / files can be entered.

• To repeat the current track / file in the program,

press [REPEAT] repeatedly until “

Track”

appears during playback. To repeat the entire

program, press [REPEAT] repeatedly until

“

All”appears during playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

• To repeat the current track / file in the random

selection, press [REPEAT] repeatedly until

Track”appears during playback. To repeat

the entire random selection press [REPEAT]

 Noise reduction (DVD-video only)

Reduces the noise of the playback picture.

“

“Off” :Shows the original picture as recorded.

“1” :Executes 3D noise reduction which detects

and deletes the noise by comparing each

picture frames.

“2” :Executes MPEG noise reduction which

reduces the block noise and mosquito

noise on the subtitle on movie.

“3” :Executes both MPEG noise reduction and

3D noise reduction.

repeatedly until “

playback.

All”appears during

• Playback from a desired track / file is not

available during random playback.

• In stop mode, press [RETURN] to switch to the

program playback mode.

Rapid Playback

This function plays back approximately at 1.3

times the normal playback while keeping the

sound output. This function is available only on

discs recorded in the Dolby Digital format.

1. During playback, press [MODE] repeatedly

until the Rapid playback setting appears.

3. Press [RETURN] to exit.

Note

• The setting will remain the same even if the unit

is turned to the standby mode.

• “Black Level”is not effective under the following

conditions.

Off

- When the picture is output from HDMI OUT

jack.

• You cannot adjust the setting during rapid

playback.

2. Press [OK] or [s/B] to switch (1.3x), or “Off”.

“Off” : Plays back in normal speed.

“

”: Plays back approximately at 1.3 times of

normal playback.

3. Press [B (play)] to return to normal

Virtual Surround

You can enjoy stereophonic virtual space through

your existing 2 channel stereo system.

playback.

Note

• Picture adjustment and audio language setting

cannot be changed during this function.

• Virtual surround does not work during this

function.

• This function may not work at some points on

a disc.

1. During playback, press [MODE].

2. Use [K/L] to select your desired setting.

Off

“Off” :No surround effect

“1” :Natural surround effect

“2” :Stronger surround effect

3. Press [RETURN] to exit.

• During this function, 2ch LPCM will be output

from HDMI OUT jack and DIGITAL OUT jack.

Adjusting the Picture

Note

You can adjust the picture quality.

• Set the virtual surround setting to “Off”or lower

the volume if the sound is distorted.

• Virtual surround does not function during rapid

playback.

1. During playback, press [MODE] repeatedly

until

appears.

2. Use [K/L] to select your desired item, then

use [s/B] to adjust the setting.

• For the virtual surround, audio signal will always

be 2-channel LPCM.

Black Level

Noise Reduction

Off

e.g.) DVD-video

 Black level

You can adjust the black level setting to make the

black parts of the pictures as bright as you prefer.

You can select “On”or “Off”.

“On” :Makes the dark parts brighter.

“Off” :Shows the original picture as recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying BD-Live Discs with Internet

PIP (BONUSVIEW) Setting

You can enjoy BD-Live which enables you to use

interactive features when the unit is connected

to the Internet. (For network connection, refer to

page 39.) Examples of BD-Live features:

• Online access to additional content such as

movie trailers, subtitles, BD-Java applications,

etc.

Some BD-videos have the PIP function which

enables you to display the secondary video in

the primary video. You can call up the secondary

video by pressing [MODE] whenever the scene

contains the secondary video.

• While downloading, special video data may be

played back.

 How to Activate the BD-Live Function

primary video

1. Insert the disc with BD-Live function.

2. Insert an SD card with enough capacity. (SD

card of 1GB or more is recommended.)

• Make sure to use the SD card with the

supported file system. (Refer to “Reading the

SD Memory Card”on page 16.)

secondary video

1. During playback, press [MODE] repeatedly

until the PIP function appears.

2. Use [K/L] to select the secondary video you

want.

3. Press [TOP MENU] to access the disc menu.

4. Select “BD-Live”, then press [B (play)] or

[OK].

• The secondary video will be displayed and

the secondary audio will be output.

• Use [s/B] to switch between current setting

and “Off”.

• Make sure the SD card is correctly inserted,

and do not remove the card during playback.

• Service and functions differ depending on

the disc. Follow the instructions given by the

disc when using the BD-Live function.

Note

3. Press [RETURN] or [MODE] to remove the PIP

information.

• You must connect the unit to the Internet and

set up necessary settings in order to use BD-

Live.

• For certain discs, “BD-Live Setting”may need to

be changed.

• Depending on your connection environment, it

may take time to connect to the Internet or the

Internet may not be connected.

Note

• The secondary audio will not be output when

the secondary audio is set to “Off”or when “BD

Audio Mode”is set to “HD Audio Output”. Refer

to“Switching Audio Soundtrack”on page 24 and

“Setting the BD Audio Mode”on page 24.

Camera Angle

• When BD-Live functions are used and the unit is

connected to the Internet, you may be charged

for this communication.

• While connecting to BD-Live, sometimes it can

take awhile before the next page is downloaded

or refreshed.

Some BD-videos and DVD-videos contain scenes

which have been shot simultaneously from

various angles. You can change the camera angle

when

appears on the TV screen.

1. During playback, press [ANGLE].

• The selected angle will be displayed on the

display bar at the top of the TV screen.

2. Use [K/L] to select your desired angle.

• Some discs with BD-Live function require

memory when playing back the content. If you

cannot play back a disc with BD-Live function,

insert an SD card(1GB or more) which is

formatted on this unit.

1 / 3

Note

Note for AACS Online

• If “Angle Icon”setting is “Off”in “Others”menu,

will not appear. Refer to page 36.

• The player or disc IDs may be sent to the

content provider when playing back a disc with

BD-Live function.

• If you save your viewing history on the server by

using these IDs, you will be introduced to other

similar movies.

• You can save game score histories.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using [the Number buttons] (Direct Search)

 Using [H/G (skip)]

 Title search

1. During playback, press [G (skip)] to move

to the next track / title / chapter / file. Press

it repeatedly to skip to subsequent tracks.

Press [H (skip)] once to go back to the

beginning of the current track. Press it

repeatedly to go to the previous tracks.

• For JPEG files, press [H (skip)] to go back to

the previous file.

In stop mode, enter the title number you want

to search using [the Number buttons].

Playback of the title will start in a few seconds.

 Chapter search

During playback of a title, enter the chapter

number you want to search using

[the Number buttons].

Playback of the chapter will start in a few

seconds.

Note

 Track / file search

• For BD and DVD, if title contains no chapters,

[H/G (skip)] changes the title.

• For JPEG files, [s/B] is also available.

Enter the track / file number you want to search

using [the Number buttons].

Playback of the track / file will start in a few

seconds.

 Using [SEARCH]

By using [SEARCH], you can select the following

search modes.

Note

Search mode

Available media

• As for the BD-video, how it performs will be

strongly determined by the disc, and may not

perform as described here.

BD-video

DVD-video

AVCHD file

Chapter / Title search

Switching Subtitles

audio CD

WMA file

JPEG file

BD-video

DVD-video

audio CD

AVCHD file

Some video materials may have subtitles in 1 or

more languages. For commercially available discs,

the supported languages can be found on the disc

case. Follow the steps below to switch the subtitle

languages during playback.

Track search

Time search

1. During playback, press [SUBTITLE].

2. Use [K/L] to select “Primary Subtitle”,

“Secondary Subtitle” or “Subtitle Style”, then

press [OK].

1. During playback, press [SEARCH] repeatedly

until your desired search mode appears.

2. Enter the desired chapter, title, track, file

number or time to search for using

[the Number buttons].

Primary Subtitle

Secondary Subtitle

Subtitle Style

2/25

ENG

/11

• Chapter, title, track or time search will start.

• Press [CLEAR] to erase an incorrect input.

Note

“Primary Subtitle” :

Sets the subtitle for

the primary video.

• During program and random playback, search

functions are not available except the search

using [H/G (skip)].

• Time search is available only in the same track,

file or title.

• For BD / AVCHD, chapter and time search are

available only during playback.

“Secondary Subtitle” : Sets the subtitle for

the secondary video.

Sets style of the

subtitle.

“Subtitle Style” :

3. Use [K/L] to select your desired subtitle or

style.

• Use [s/B] to switch between current subtitle

setting and “Off”.

4. Press [SUBTITLE] to exit.

1. During playback, press [SUBTITLE].

2. Use [K/L] to select your desired subtitle.

• Use [s/B] to switch between current subtitle

setting and “Off”.

ENG

/ 4

3. Press [SUBTITLE] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

• The secondary audio will not be output when

the secondary video is not displayed or when

“BD Audio Mode”is set to “HD Audio Output”.

(For some BDs, secondary audio will be output

even when secondary video is off.)

• Some discs will only allow you to change the

subtitles from the disc menu or pop-up menu.

Press [TOP MENU] or [POP MENU / MENU] to

display the disc menu or pop-up menu.

• If 4-digit-language code appears in the subtitle

menu, refer to “Language Code List”on page 48.

• If the disc has no subtitle language or subtitle

style, “Not Available”will be displayed on the TV

screen.

• The sound mode cannot be changed during

playback of discs not recorded in multiple

audio.

• Some discs allow changing the audio language

setting on the disc menu. (Operation varies

depending on the discs. Refer to the manual

accompanying the disc.)

• [AUDIO] may not work on some discs with

multiple audio streams or channels (e.g. DVDs

that allow changing audio setting on the disc

menu).

• If you select a language that has a 3-letter-

language code, the code will be displayed every

time you change the audio language setting.

If you select any other languages, “---”will be

displayed instead. (Refer to page 48.)

• Audio Language selection cannot be made

during rapid playback. (Refer to page 21.)

• If 4-digit-language code appears in the audio

menu, refer to page 48.

• During playback of the secondary video, the

primary subtitle setting is not available except

when there is no subtitle for the secondary

video.

• If you select a language that has a 3-letter-

language code, the code will be displayed every

time you change the subtitle language setting.

If you select any other languages, “---”will be

displayed instead. (Refer to page 48.)

Switching Audio Soundtrack

When playing back video material recorded with

2 or more soundtracks (these are often in different

audio languages or audio formats), you can switch

them during playback.

• If the disc has no audio language, “Not

Available”will be displayed on the TV screen.

• For DTS-CD (5.1 music disc), selecting audio

streams or channels is not available.

1. During playback, press [AUDIO].

2. Use [K/L] to select “Primary” or “Secondary”

audio to set, then press [OK].

Primary

ENG

Secondary

ENG

Dolby D

Multi-ch

Setting the BD Audio Mode

Dolby D+

There are 2 options for the “BD Audio Mode”

setting; either by setting the output to the

secondary and interactive audio accompanied by

the primary audio or by setting only the primary

audio. Depending on the setting of the mode,

Dolby Digital, Dolby Digital Plus, Dolby TrueHD,

DTS, or DTS-HD output changes between multi

LPCM and Bitstream.

“Primary” :

Sets the audio for the primary

video.

“Secondary” : Sets the audio for the

secondary video.

3. Use [K/L] to select your desired audio

stream channel.

• For “Secondary”, use [s/B] to switch

between current audio setting and “Off”.

4. Press [AUDIO] to exit.

1. In stop mode with BD inserted, press

[MODE].

2. Use [K/L] to select your desired setting.

BD Audio Mode

Mix Audio Output

1. During playback, press [AUDIO].

2. Use [K/L] to select your desired audio

stream channel.

“Mix Audio Output”:

If it is available, BD-video’s secondary and

interactive audio will be output with the

primary audio.

ENG Dolby D

3/2.1ch

48k

/ 3

• The secondary audio is the audio for the

secondary video (Director’s comment etc.)

and the interactive audio is the audio for the

interactive application (Button click sounds

etc.).

• For audio CD, you can select following

options.

“Stereo” : Both right and left channels are

active (stereo).

“L-ch” :

“R-ch” :

Only left channel is active.

Only right channel is active.

“HD Audio Output”:

Only the primary audio will be output. Set this

mode in order to output , Dolby Digital Plus,

Dolby TrueHD, or DTS-HD audio of BD through

HDMI connection.

3. Press [AUDIO] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Press [RETURN] to exit.

4. Enter the activation code which is displayed

on the TV screen.

• You can also set “BD Audio Mode”from the

setup menu. Refer to page 31.

• The instant Queue will appear. The

connection to Netflix is successfully made.

• To browse the instant Queue and watch

movies, skip to step 2 in “Watching Streaming

Movies”on page 25.

Note

• In “Mix Audio Output”mode, if there is no

secondary and interactive audio, the audio will

be output as “HD Audio Output”mode.

Note

• Netflix is available only in the United States.

• You cannot create a Netflix account on this unit.

• If newer version of software is required,

software update screen may appear after

selecting “NETFLIX”in step 1. (For software

update, refer to “Software Update”on page 43.)

• You can deactivate the connection to Netflix

by setting “Netflix Deactivate”to “Yes”. (Refer to

page 44.)

NETWORK OPERATIONS

Netflix Operations

With this unit, you can watch movies and TV

episodes streamed instantly from Netflix (version

1.6) via the Internet. In order to use this feature, you

must visit the following website on your PC and

become a Netflix member. netflix.com/MAGNAVOX

• The screen image of Netflix may change after

updating the firmware.

Before Activating the Connection to Netflix

• For questions regarding the Netflix service, visit

netflix.com/Help

After creating a Netflix account at netflix.com/

MAGNAVOX, follow the following procedure

before activating the connection to Netflix.

1. Connect this unit to the Internet.

• Refer to “Connection to the Network”on

page 12.

• When you contact the Netflix customer service,

you may be asked for the ESN number, which is

a serial number to identify this unit by Netflix.

You can check the ESN number on the bottom

of the “Netflix Deactivate”screen. (Refer to page

44.)

2. Set up the necessary network connection

settings.

• Refer to “Network Connection”on page 39.

Watching Streaming Movies

Activating the Connection to Netflix

After you set up the connection to Netflix, you can

browse the instant Queue and watch movies on

your TV.

1. Press [GREEN] while opening screen is

displayed.

For opening screen, refer to page 9.

The instant Queue will appear.

2. Use [s/B] to select the desired movie or

TV episode, then press [B(play)] to start

playback.

In order to watch movies and TV episodes

streamed instantly from Netflix via the Internet,

you must activate the connection between this

unit and your Netflix account.

1. Press [GREEN] while opening screen is

displayed.

• For opening screen, refer to page 9.

• Netflix welcome screen will appear.

• For the first time only, “Network Service

Disclaimer”screen will appear. After

confirming the content, use [s/B] to select

“Agree”, then press [OK].

2. Use [K/L] to select “yes - activate instant

streaming from Netflix”, then press [OK].

• Activation screen with the activation code

will appear.

• After loading, playback of the selected movie

or TV episode will start.

• To stop the playback, press [C(stop)].

• To go back to the instant Queue, press [RED].

• To go back to the opening screen, press

[TOP MENU] or [SETUP].

About the Instant Queue

• Instant Queue is the list of movies and TV

episodes you add on the Netflix website

(netflix.com). You can manage the movies and

TV episodes in your instant Queue from the

3. On your PC, visit netflix.com/activate and

log into your account.

• The entry screen of activation code will

appear on your PC screen.

Download from Www.Somanuals.com. AllNMeatnfuliaxlswSeebasricteh oAnndyDoouwr nPlCoa. d.

3. Use [s/B] to select “Configure”, then press

[OK].

• You cannot add movies or TV episodes to your

instant Queue on this unit.

• You can remove movies or TV episodes from the

instant Queue on this unit.

Note

• Activation code input screen will appear.

Conﬁgure

Activate this device on your BLOCKBUSTER account.

To get started, please visit www.blockbuster.com/activate/

• The picture quality differs depending on the

speed of your Internet connection at the time

of loading.

Use the numbers on your remote control.

Activate

Blockbuster Operations

With this unit, you can watch movies and TV

episodes streamed instantly from Blockbuster

via the Internet. In order to use this feature, you

must visit the following website and create a

Blockbuster account.

4. Enter the activation code displayed on your

PC using [s/B] and [the Number buttons],

then select “Activate” and press [OK].

Note

• The image of menu screen may change after

updating the firmware.

- For Blockbuster, visit

www.blockbuster.com/auth/login

• You cannot create Blockbuster account on this

unit.

• To deactivate the connection to Blockbuster,

select “Deactivate”in “Configure”.

• For questions regarding Blockbuster service,

visit www.blockbuster.com/help

Before Activating the Connection to

Blockbuster

After creating a Blockbuster account, follow

the following procedure before activating the

connection to Blockbuster.

1. Connect this unit to the Internet.

• Refer to “Connection to the Network”on page

12.

Guide to Blockbuster Menu Screen

Blockbuster

2. Set up the necessary network connection

settings.

• Refer to “Network Connection”on page 39.

Activating the Connection to Blockbuster

In order to watch movies and TV episodes

streamed instantly from Blockbuster via the

Internet, you must activate the connection

between this unit and your Blockbuster account.

1. On your PC, visit following website and log

into your account to get the activation code.

• Follow the instruction given by the website.

• Take a note of the activation code which

appears on the PC.

Browse

My Library

My Favorites

Conﬁgure

Help

1 Browse :

2 Search:

3 My Library :

To access the movie list

To access search screen

To access the list of

rented or purchased

movies / TV episodes

To access your favorite

list

To access configure

To access the help page

- For Blockbuster, visit

www.blockbuster.com/magnavox

2. On this unit, press [BLUE] while opening

screen is displayed.

• For opening screen, refer to page 9.

• Menu screen of Blockbuster will appear.

• For the first time only, “Network Service

Disclaimer”screen will appear. After

confirming the content, use [s/B] to select

“Agree”, then press [OK].

4 My Favorites :

5 Configure :

6 Help :

Renting or Purchasing Movies / TV Episodes

After you set up the connection to Blockbuster,

you can rent or purchase movies / TV episodes

and watch directly on your TV.

1. Press [BLUE] while opening screen is

displayed.

• For opening screen, refer to page 9.

2. Use [K/L/s/B] to select “Browse”, then

press [OK].

• List of movies / TV episodes will appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Use [K/L/s/B] to select the desired title,

then press [OK].

Note

• Depending on your network environment and

speed, the playback may be paused or stopped.

To improve playback condition, use high speed

broadband Internet connection (For details,

contact your Internet service provider.)

• Title details screen of the selected title will

appear.

4. Use [s/B] to select “Rent” or “Buy”, then

press [OK].

• Checkout screen will appear.

5. Use [s/B] to select “Submit Order”, then

press [OK].

VUDU Operations

With this unit, you can enjoy VUDU HD on-

demand movies / TV episodes and Internet

applications.

- For complete instructions on using VUDU

service, please visit www.vudu.com/docs to view

an updated in-depth online manual.

6. Use [s/B] to select “Play Now”, then press

[OK].

• If you want to continue browsing, select

“Continue Browsing”and press [OK] to go

back to “Browse”.

Note

Before Activating VUDU

• If you select “Add to My Favorites”in title details

screen, the title will be added to your “My

Favorites”.

Follow the following procedure before activating

VUDU.

1. Connect this unit to the Internet.

• Refer to “Connection to the Network”on page

12.

• In most cases, rented movies or TV episodes

are available for 24 hours from the playback

starting time.

• Broadband Internet connection of 8 Mbps or

faster is recommended.

Searching Movies / TV Episodes

2. Set up the necessary network connection

settings.

From the search screen, you can search for movies

/ TV episodes by entering search words.

1. Follow step 1 in “Renting or Purchasing

Movies / TV Episodes” on page 26.

2. Use [K/L] to select “Search”, then press [OK].

• Keypad screen will appear.

• Refer to “Network Connection”on page 39.

Activating VUDU

After you set up the network connection, you

must set up a VUDU account and activate this unit

before watching VUDU movies.

1. Press [RED] while opening screen is

displayed.

3. Use [K/L/s/B] to select characters, then

press [OK].

• When you enter a letter, titles that start with

the letter will be displayed on the right side

of the screen.

• For opening screen, refer to page 9.

• VUDU App Home screen will appear.

• For the first time only, “Network Service

Disclaimer”screen will appear. After

confirming the content, use [s/B] to select

“Agree”, then press [OK].

4. Use [K/L/s/B] to select a desired title from

the search result on the right side of the

screen, then press [OK].

• Title details screen of the selected title will

appear.

2. Use [K/L/s/B] to select “VUDU movies”,

then press [OK].

Watching Rented or Purchased Movies / TV

Episodes

• VUDU welcome screen will appear.

3. Select “SIGN Up Now”, then press [OK].

4. Enter the e-mail address you would like

associated with your VUDU account. After

you enter your e-mail address correctly,

select “Done” and press [OK].

1. Follow step 1 in “Renting or Purchasing

Movies / TV Episodes” on page 26.

2. Use [K/L/s/B] to select “My Library”, then

press [OK].

• Activation e-mail will be sent to the e-mail

address. (You must have access to the e-mail

address to activate VUDU.)

• List of rented or purchased movies / TV

episodes will appear.

3. Use [K/L/s/B] to select a desired title, then

press [OK].

5. Follow directions in the activation e-mail to

complete your account activation.

Note

4. Use [s/B] to select “Play Now”, then press

[OK].

• You can deactivate the connection to VUDU

by setting “Vudu Deactivate”to “Yes”. (Refer to

page 44.)

• For questions regarding VUDU service, please

contact VUDU Customer Care at

1-888-554-VUDU (8838) or visit

www.vudu.com/support

• If you want to resume playback, select “Resume

Play”and press [OK].

• To stop the playback, press [C(stop)].

• To pause the playback, press [F(pause)].

• To go back to the opening screen, press

[TOP MENU] or [SETUP].

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to VUDU Menu Screen

Renting or Purchasing VUDU Movies / TV

Episodes

 App Home Screen

After activating this unit, you are ready to

purchase or rent movies / TV episodes and watch

directly on your TV.

App Home screen is the entry point to VUDU

applications including VUDU movies. To call up

the screen, press [RED] while opening screen is

displayed.

1. Press [RED] while opening screen is

displayed.

• For opening screen, refer to page 9.

2. Use [K/L/s/B] to select “VUDU movies”,

then press [OK].

Most Popular

• VUDU movies home screen will appear.

3. Use [K/L/s/B] to select “Most Watched” ,

“New on Vudu” or “Explore Catalog”, then

press [OK].

Newest

Browse by Genre

My Favorites

4. Use [K/L/s/B] to select the desired movie

or TV episode, then press [OK].

• “MOVIE DETAILS”screen will appear.

5. Use [K/L] to select “Rent” or “Own”, then

press [OK].

1. Viewing mode : List of different viewing

modes for App Home

6. Use [K/L] to select a desired quality option,

then press [OK].

applications

• Select the quality option that best suits your

network environment.

2. Promotional

graphics :

Placeholder where

promotional graphics are

displayed

Video Resolution

480p

HD 720

Minimum Bit Rate

1 Mbps

2.25 Mbps

4.5 Mbps

3. Application list : Grid of applications in the

selected viewing mode

HDX 1080p

 VUDU Movies Home Screen

When you select “VUDU movies”in App Home

screen, VUDU movies home screen will appear.

7. Use [K/L] to select “Rent for $*.**” or “Buy

for $*.**”, then press [OK] to confirm your

rental or purchase.

8. Select “Watch Now” to start playing the

movie / TV episode.

• If you want to return to the “MOVIE DETAILS”,

select “Watch Later”.

Note

• Available quality options differ depending on

the content.

1. Most Watched : To access the list of popular

movies / TV episodes on

VUDU

2. New on Vudu : To access the list of newly

available movies /TV

episodes

3. Explore Catalog : To access the list of options

to search movies / TV

episodes

To access the list of rented or

purchased contents

4. My Vudu :

Note

• You can go back to VUDU movies home screen

by pressing [BLUE] while you are using VUDU

movies features.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching Rented or Purchased VUDU Movies /

TV Episodes

FUNCTION SETUP

In the setup menu you can change the setting for

audio, video, language, etc. You cannot change

the setting during playback.

Setting items displayed in gray indicates they are

not available under the conditions at the time.

1. Follow steps 1 to 2 in “Renting or Purchasing

VUDU Movies / TV Episodes” on page 28.

2. Use [s/B] to select “My Vudu”, then press

[OK].

3. Use [s/B] to select “My Rentals”, “My

Movies” or “My TV Shows”, then press [OK].

4. Use [K/L] to select a desired movie / TV

episode, then press [OK].

Quick

“

Quick”menu contains setting items extracted

from “ Custom”menu which may be used

frequently.

5. Select “Watch ***” to start watching the

movie / TV episode.

1. In stop mode, press [SETUP].

2. Use [K/L] to select , then press [OK].

3. Use [K/L] to select your desired setting

items.

• During playback, use following buttons to

control the playback.

Button

[F(pause)]

Action

Pause the playback.

Quick

Mode Select

HDMI Audio Out

Disc

[C(stop)]

Stop the playback.

HDMI Multi(Normal)

HDMI Video Resolution Auto

Player Menu

Network Selection

English

Wired

[E(reverse)] /

[D(forward)]

Fast reverse or forward

the playback.

[B(play)]

Resume the playback.

4. Follow the procedure below depending on

the setting items.

[YELLOW]

Display the info banner

which shows the

A) If “B”does not appear on the right side of

the setting items when you select the items:

Press [OK] repeatedly to change options.

B) If “B”appears on the right side of the setting

items when you select the items:

1) Press [OK].

playback information.

[TOP MENU]

Go back to opening

screen.

Note

2) Use [K/L] to select options, then press

[OK].

• Available buttons and actions may subject to

change without notice.

• Use [s] or [RETURN] to go back to the

previous screen.

Using Internet Applications

In addition to VUDU movies, you can use various

kinds of Internet applications.

5. Press [SETUP] to exit.

1. In App Home screen, use [K/L/s/B] to

select a desired application and press [OK].

2. Follow the instructions on screen of the

selected application.

Note

• Available applications may change without

notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

- inside the parentheses next to “Auto”will be

the language which is currently selected by

your TV.

Custom

“

Custom”menu contains all the setting items.

1. In stop mode, press [SETUP].

2. Use [K/L] to select , then press [OK].

3. Use [K/L] to select your desired setting

category, then press [OK].

: Language

• For “Audio”, “Subtitle”, and “Disc Menu”, if you

select “Other”, enter the 4-digit-number code for

the desired language. (Refer to “Language Code

List”on page 48.) Only the languages supported

by the disc can be selected.

: Video

: Audio

: Parental

Video

: Others

• For “Parental”menu, follow the procedure on

page 35.

Video

4. Use [K/L] to select your desired setting

items.

TV Aspect

16:9 Wide

HDMI Video Resolution Auto

5. Follow the procedure below depending on

the setting items.

HDMI Deep Color

Progressive Mode

Still Mode

Auto

A) If “B”does not appear on the right side of

the setting items when you select the items:

Press [OK] repeatedly to change options.

B) If “B”appears on the right side of the setting

items when you select the items:

1) Press [OK].

• To select the setting items and options, refer to

Custom”on page 30.

• “ Quick”menu consists of the setting menus

frequently used, and they are accompanied

“

2) Use [K/L] to select options, then press

[OK].

• Use [s] or [RETURN] to go back to the

previous screen.

with

Setting items

TV Aspect

Descriptions

6. Press [SETUP] to exit.

Sets the picture size

according to aspect

ratio of the connected

TV.

Language

HDMI Video Resolution Sets the HDMI video

Audio

Subtitle

Original

Oﬀ

resolution.

HDMI Deep Color

Progressive Mode

Sets whether to output

the picture from HDMI

OUT jack with Deep

Color or not.

Sets the optimum

progressive mode for

the image material

output from HDMI OUT

jack.

Disc Menu

Player Menu

English

• To select the setting items and options, refer to

Custom”on page 30.

• “ Quick”menu consists of the setting menus

frequently used, and they are accompanied

with

Setting items

Audio

“

Still Mode *1

Adjusts picture

resolution and quality in

still mode.

Descriptions

*1) An individual picture on the TV screen is called

“Frame”, which consists of two separate images

called “Field”. Some pictures may be blurred at

the auto setting in “Still Mode”setting due to

their data characteristics.

Sets the language for

audio.

Subtitle

Sets the language for

subtitle.

Sets the language for

disc menu or pop-up

menu.

Disc Menu

Sets the language for

on-screen display.

Player Menu *1

*1) “Auto”for “Player Menu”activates the Get & Set

Menu Language function. Refer to page 38.

- “Auto”is available only when “fun-Link (HDMI

CEC)”is set to “On”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note for “HDMI Video Resolution”

Setting items

Descriptions

• Even if you set “HDMI Video Resolution”setting

to “Auto”, when this unit is connected to a DVI

compatible display devices with an HDMI-DVI

cable, 480p signal will be output.

BD Audio Mode

For BD, selects whether

to output the secondary

and interactive audio

with primary audio if it

is available or only the

primary audio. Refer to

“Setting the BD Audio

Mode”on page 24.

• Video and audio signals may be distorted

temporarily when switching to / from the HDMI

output mode.

• You cannot change the video resolution during

playback of Blu-ray Discs or AVCHD files. To

change the resolution, stop playback.

• In order to get natural and high quality film

reproduction of 24-frame film material, use

an HDMI cable (High Speed HDMI cable

is recommended) and select “Auto”if the

connected TV is compatible with 1080p24

frame input.

Sets the audio format

for the audio output

from HDMI OUT jack.

Refer to page 32.

HDMI Audio Out *1

Down Sampling

Sets the digital audio

output when playing

back BD or DVD

recorded in LPCM.

DRC

Sets whether to

• Even if the connected TV is compatible with

1080p24 frame input and you set “HDMI Video

Resolution”setting to “Auto”, when the contents

of the disc are not compatible for 1080p24

frame, 1080p60 frame will be output.

• If the picture is not output properly to the TV

because of “HDMI Video Resolution”, press and

hold [B PLAY] on the front panel for more than

5 seconds. Both settings will be reset to the

default automatically.

• For AVCHD, 24-frame film material will be

output as 60 frame, even if the connected

device is compatible with 1080p24 frame

input and “HDMI Video Resolution”is set to

“1080p24”or “Auto”.

compress the range of

sound volume (dynamic

range control) when

Dolby Digital, Dolby

Digital Plus or Dolby

TrueHD audio is played

back.

When “Auto”is

selected,this unit

detects DRC setting of

the disc and set “DRC”

setting to “On”or “Off”

automatically when the

discs recorded in Dolby

TrueHD format are in

playback.

*1) Under following circumstances, “HDMI

Multi(Normal)”and “HDMI Multi(LPCM)”are

not available.

Audio

- HDMI cable is not connected to HDMI OUT

jack.

BD Audio Mode

HDMI Audio Out

Down Sampling

DRC

Mix Audio Output

HDMI Multi (Normal)

Auto

- Connected TV is off.

- Connected TV is not compatible with audio

output.

• To select the setting items and options, refer to

Custom”on page 30.

“

• “ Quick”menu consists of the setting menus

frequently used, and they are accompanied

with

Download from Www.Somanuals.com. All Manuals Search And Download.

HDMI Audio Out Setting

When using HDMI connections make “HDMI Audio Out”setting in “Audio”menu according to the

specifications of the device to be connected. Refer to page 31. Normally, set it to “HDMI Multi(Normal)”so

that the unit automatically picks and outputs the best audio format suited to your connected device.

Device to be connected

“HDMI Audio Out”

Output HDMI audio signal

setting

Device compatible with Dolby

Digital, Dolby Digital Plus, Dolby

TrueHD, DTS or DTS-HD decoding

HDMI Multi(Normal)

Dolby Digital, Dolby Digital Plus, Dolby

TrueHD, DTS, or DTS-HD bitstream are

output from HDMI OUT jack. Make the

speaker settings on the connected AV

amplifier, etc.

Device compatible with 3 or more HDMI Multi(LPCM)

channels of audio inputs (not

Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, DTS or DTS-HD

compatible)

Multi-channel audio signals are output

from HDMI OUT jack. Make the speaker

settings with the speaker setting

items appear after you select “HDMI

Multi(LPCM)”.

HDMI audio will be mute, and Dolby

Digital / DTS bitstream or LPCM will be

output from DIGITAL OUT jack depending

on “Digital Out”setting.

HDMI connection to a TV and

digital audio connection (coaxial)

to an AV amplifier

Audio Mute

Note

• The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and

bit length) maybe limited by the device that is connected.

• Among the devices that support HDMI, some do not support audio output (e.g. projectors). In

connections with device such as this unit, audio signals are not output from HDMI OUT jack.

• Video and audio signals may be distorted temporarily when switching to / from the HDMI output

mode.

Digital Out Setting

When “Audio Mute”is selected in “HDMI Audio Out”setting, HDMI audio signal will be mute and the

audio signals output from DIGITAL OUT jack changes depending on “Digital Out”setting.

Quick  HDMI Audio Out  Audio Mute  Digital Out

Bitstream* :

When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS® or DTS-HD®,

the corresponding core stream (Dolby Digital or DTS®) are output.

LPCM :

LPCM signal will be output from DIGITAL OUT jack.

• This setting is not effective when the HDMI audio signal is output.

Note

• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set

“HDMI Audio Out”setting to “HDMI Multi(LPCM)”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speaker Setting (Available when you have HDMI cable connected to HDMI OUT jack)

This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.

To make the most of its feature, set up your speakers appropriately by referring to the following table.

How to navigate through “HDMI Multi(LPCM)”:

1) Use [K/L] to select your desired menu item then

press [OK].

2) Use [K/L] to select your setting items.

Front speaker (left)

Front speaker (right)

Subwoofer

• Press [RETURN] to go back to the previous screen.

3) Use [s/B] to select desired options. (Except

for “Test Tone”, “Default” and setting options in

“Speaker Size” setting.)

Center speaker

For setting options in “Speaker Size” setting:

Press [OK] to select desired options.

For “Test Tone”:

Use [s/B] to select “Off”, “Manual” or “Auto”,

then press [OK].

Surround

speaker (left)

Surround

speaker (right)

• The test tone will be output. If you select

“Manual”, use [K/L] to select desired speaker,

then use [s/B] to adjust the volume. If you

select “Auto”, use [s/B] to adjust the volume of

the speaker that outputs the test tone.

• If you want to stop the test tone, press [RETURN].

Surround

back speaker

(left)

Surround

back speaker

(right)

e.g.) basic layout with 7.1-channel surround system

For “Default”:

Press [OK] to reset to the default.

4) Press [SETUP] to exit.

Quick  HDMI Audio Out  HDMI Multi(LPCM)

Custom  Audio  HDMI Audio Out  HDMI Multi(LPCM)

Setting items

Descriptions

Speaker Size

Front

Center

Subwoofer

Surround

Large:

Selects the desired speaker to

set. Then change the setting by

referring to the descriptions.

For the large speakers with strong

low frequency reproduction

capabilities.

Small:

Surround Back

For the small speakers which do

not provide strong bass sound.

You cannot change the setting of

“Subwoofer”. Speakers which are

not supported by the connected

device will be displayed in gray.

Default

Select “Default”, then press [OK]

to reset

“Speaker Size”setting to the

default.

Download from Www.Somanuals.com. All Manuals Search And Download.

Channel Level

Setting items

Test Tone:

Descriptions

Select “Off”to deactivate “Test

Tests or sets the volume for each “Test Tone”is the test tone which Tone”. Select “Manual”, then press

speaker.

can be output from the speakers [OK] to manually set the volume for

so you can adjust the volume for the desired speaker.

each speaker.

Select “Auto”, then press [OK] to

automatically output the test tone

from each speaker.

Front Lch

Center

Subwoofer

Front Rch

Surround Rch

Surround Back Rch

Surround Back Lch

Surround Lch

Default

If you have selected “Manual”in

“Test Tone”, select the desired

speaker to set and adjust the

volume for the selected speaker. If

you select “Auto”in “Test Tone”, test

tone will automatically be output

in order. Adjust the volume of the

speaker that outputs the test tone.

Select “Default”, then press [OK] to

reset “Channel Level”setting to the

default.

Delay Time

Distance

Set the desired measure system.

This measure system will be used

for “Delay Time”setting.

This is a parameter for optimizing

the timing at which the sound

outputs from the speakers

according to the distance from

the listening position.

Press [OK] to switch the settings.

Front

Center

Surround

Surround Back

Default

Select the distance from the

listening position to the speaker to

get the ideal delay time.

Select “Default”, then press [OK] to

reset “Delay Time”setting to the

default.

• For “Speaker Size”setting, the settings of each speaker size may be adjusted automatically

corresponding to each setting. (e.g. If “Front”is set to “Small”, you cannot set “Center”, “Surround”, and

“Surround Back”to “Large”.)

• For “Delay Time”, the difference between the value of the “Front”, “Surround”and “Surround Back”

setting cannot exceed 15 ft (4.5m), and the difference between the value of the “Front”and “Center”

setting cannot exceed 5 ft (1.5m).

• For “Delay Time”, the value of the “Center”, “Surround”and “Surround Back”setting cannot exceed the

value of the “Front”setting.

• For “Delay Time”, the setting of “Center”, “Surround”and “Surround Back”will be changed automatically

to the setting value of the “Front”. (e.g. If the “Front”is set to 60ft (18m), the setting of “Center”,

“Surround”and “Surround Back”will be changed to 60ft (18m) as well.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Parental

Ratings control allows you to set a limit, which prevents your children from viewing inappropriate

materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter

a password before playing back the disc.

Parental

BD Rating Level

DVD Rating Level

Password Change

All

1. Use [K/L] to select , then press [OK].

2. Use [the Number buttons] to enter your 4-digit password.

For the first time use: Use [the Number buttons] to enter any 4-digit number (except for 4737), then

press [OK]. That number will be used as the password from the second time. Record your password in

case you forget it.

• If you forget the password, enter [4], [7], [3], [7]. The password will be cleared and rating level will be

set to “All”.

• While you input the password, press [CLEAR] to clear the number, then re-enter the password.

3. Proceed to A – C

A) BD Rating Level

1) Use [K/L] to select “BD Rating Level”, then press [OK].

2) Use [K/L] to select your desired option, then press [OK].

“All”:

To release the limitation.

To set the age limitation.

“Age Setting”:

• After selecting “Age Setting”, use [the Number buttons] to enter the age from 0 – 254.

(e.g. for age 15, press [0], [1], [5])

3) Press [SETUP] to exit.

B) DVD Rating Level

1) Use [K/L] to select “DVD Rating Level”, then press [OK].

2) Use [K/L] to select your desired level, then press [OK].

3) Press [SETUP] to exit.

RATING EXPLANATIONS

All:

Parental Control is inactive; all discs can played back.

DVD software of any grades (adult / general / children) can be played back.

No one under 18 admitted.

8 [Adult] :

7 [NC-17] :

6 [R] :

5 [PGR] :

4 [PG-13] :

3 [PG] :

2 [G] :

Restricted; under 18 requires accompanying parent or adult guardian.

Parental guidance recommended.

Unsuitable for children under 13.

Parental guidance suggested.

General audience.

1 [Kid Safe] : Suitable for children.

C) Password Change

1) Use [K/L] to select “Password Change”, then press [OK].

2) Enter a new 4-digit password, then press [OK].

3) Press [SETUP] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Others

Angle Icon

fun-Link (HDMI CEC)

Mode Select

Oﬀ

Disc

Network Connection

Software Update

• To select the setting items and options, refer to “ Custom”on page 30.

• “ Quick”menu consists of the setting menus frequently used, and they are accompanied with

• Settings with (*) are the default.

Setting items

Options / Descriptions

Angle Icon

On*:

The angle icon appears on the TV screen when playing back the scene with various angle.

Off:

The angle icon disappears on the TV screen.

fun-Link (HDMI

CEC)

Off*

Sets whether to

utilize the fun-

Link (HDMI CEC)

function. Refer to

page 38.

Disc*:

Mode Select

Select this when you play back a disc.

SD Card:

Select this when you play back an SD Memory Card.

Network:

Selects the media

to playback.

Select this when you use Netflix / Blockbuster / VUDU feature.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting items

Network

Connection

• Refer to page

39 for more

information.

Options / Descriptions

Connection

Test

Perform a network connection

test. After you change IP address

or DNS setting, always perform

this test.

If you select “Easy”, connection

test will automatically start.

Set the IP address. In most cases,

you can connect to the Internet

without making any changes to

the default setting.

Network

Selection

Wired*

Easy*

Custom

IP Address Auto(DHCP)*

Setting

Manual

IP Address

Subnet Mask

Default

Gateway

DNS Setting Auto(DHCP)*

Manual

Set the DNS setting. In most

cases, you can connect to the

Internet without making any

changes to the default setting.

Primary

DNS

Secondary

DNS

Proxy

Setting

Do Not Use*

Use

Set the proxy server. In most

cases, you can connect to the

Internet without using proxy

server.

Proxy Address

Proxy Port

Connection Auto*

Set the connection speed. In

most cases, you can connect to

the Internet without making any

changes to the default setting.

Speed

10BASE Half

10BASE Full

100BASE Half

100BASE Full

Allow*

BD-Live

Setting

You can restrict Internet access

when BD-Live functions are used.

Limited Allow

Prohibit

MAC Address

Wireless Find wireless WEP/WPA Authentication

You can check the MAC address.

Set up the connection to the

wireless router and enter the

WEP/WPA key required for

Wireless

Router

network

Manually

enter your

SSID

wireless network connection.

Wireless Router Status

You can check the current status

of the wireless router setting.

If you select “Easy”, connection

test will automatically start.

Set the IP address. In most cases,

you can connect to the Internet

without making any changes to

the default setting.

Set the DNS setting. In most

cases, you can connect to the

Internet without making any

changes to the default setting.

Set the proxy server. In most

cases, you can connect to the

Internet without using proxy

server.

Advanced Easy*

Settings

Custom

IP Address Setting

DNS Setting

Proxy Setting

BD-Live Setting

MAC Address

You can restrict Internet access

when BD-Live functions are used.

You can check the MAC address.

Deactivate the network

Disable

No*

Yes

connection.

Disclaimer

Displays the network service

disclaimer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting items

Options / Descriptions

Software Update Current Version

Allows you to

update this unit’s

firmware. Refer to

page 43.

Indicates the current firmware version.

Disc Update No*

Allows you

to update

this unit’s

software

using a

Yes

disc.

Network

Update

You can

No*

Yes

update the

software

version by

connecting

this unit to

the Internet.

fun-Link (HDMI CEC)

fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This

function may not work properly depending on a device to be connected. When “fun-Link (HDMI CEC)”

setting is set to “On”, functions listed below will be available.

One Touch Play

When this unit is turned on, the TV also is turned on and the appropriate external input channel will

be selected automatically. The appropriate external input channel can also be selected on your TV

automatically when you press [B (play)], [H (skip)], [G (skip)], [the Number buttons], [DISPLAY],

[TOP MENU], or [POP MENU / MENU] when the unit’s power is on. (Buttons other than [B (play)] works

only with discs inserted.)

Standby

When you press and hold [STANDBY/ON y] for 2 seconds, it turns off the power of the TV first and then

turns off the power of this unit also.

When the connected fun-Link (HDMI CEC) compatible display device is turned off, this unit may also turn

off together.

System Information

Get & Set Menu Language

The unit recognizes the OSD language set for the TV and automatically sets the same language as the

player menu language (OSD menu language) for this unit.

• This feature is available only when “Auto(XXXX)”is selected in “Player Menu”in the setup menu.

(Refer to “Player Menu”on page 30.)

Download from Www.Somanuals.com. All Manuals Search And Download.

• If the connection test fails, you may need to

change the MAC address settings on your

router. You can check the MAC address of this

unit on “Custom”screen. (Refer to “Custom

(Wired)“ on page 39.)

• When connecting this unit directly to a modem

for the first time or connecting it to a modem

which was previously connected to any other

network device(e.g. a router, PC, etc.), you may

have to power cycle the modem to reset the

settings on the modem.

Network Connection

[SETUP] ”Others"“Network Connection”

Set up network connection settings in order

to use BD-Live, Netflix / Blockbuster / VUDU or

network update function.

Connection Test

After you enable a network connection or

change the network settings, always perform

the connection test to check if the connection is

correctly made.

• “Connection Test”is not available when

“Disable”is selected in “Network Connection”.

1. In “Network Connection” menu, use [K/L] to

select “Connection Test”, then press [OK].

Connection test will start automatically and

the test result will appear right after the

connection test finishes.

Network Selection

 Wired

• “Testing...”: The test is in progress.

• “Pass”: Connection test is successfully

completed.

Select “Wired”if you made a wired connection and

set the setting to “Easy”(wired) or “Custom”(wired),

in accordance with your network environment.

Network settings are set to the following settings

initially. (In most cases, you can connect to the

Internet without making any changes to the

default settings.)

• “Fail”: Connection test failed. Check the

connection settings.

If the connection test passes, press [OK].

• Confirmation screen of the network selection

will appear.

e.g.) Wired connection

- IP Address Setting

- DNS Setting

Auto(DHCP)

Do Not Use

Auto

Others

Connection Test

- Proxy Setting

- Connection Speed

- BD-Live Setting

Network Selection

Wired

Allow

If you want to set the network settings back to

the default settings as above (except “BD-Live

Setting”), follow the procedure below.

then press ‘OK’

1. In “Network Connection” menu, use [K/L] to

select “Network Selection”, then press [OK].

2. Use [K/L] to select “Wired”, then press [OK].

3. Use [K/L] to select “Easy”, then press [OK].

• The unit will start the connection test

automatically and the test result will appear

right after the test finishes.

4. Press [OK] to activate the network

settings and set the network connection

automatically. Press [SETUP] to exit.

Note

Press [OK] again to display the confirmation

screen of network settings.

Others

Connection Test

IP Address

xxx.xxx.xxx.xxx

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

then press ‘OK’

• The setting of “BD-Live Setting”will not be

set back to the default, even if you follow the

procedure.

2. Press [OK], then press [SETUP] to exit.

Note

In following cases, select “Custom”(wired) to set

each setting as necessary.

• If the connection test passes, you are ready to

use BD-Live, Netflix / Blockbuster / VUDU or

network update function using the Internet

without making any additional settings.

- When connection test failed with the setting

of “Easy”(wired).

- When instructed by your Internet service

provider to make specific settings in

accordance with your network environment.

Download from Www.Somanuals.com. All Manuals Search And Download.

To set the network setting to “Custom”(wired),

follow the following procedure.

1. Follow steps 1 to 2 in “Easy (Wired)” on

page 39.

c) Use [K/L] to select “Primary DNS”or “Secondary

DNS”, then press [OK]. DNS setting screen will

appear. Enter primary DNS and secondary DNS

with cursor buttons and number buttons.

2.Use [K/L] to select “Custom”, then press [OK].

- Setting menu of “Custom”(wired) will be

displayed.

Others

DNS Setting

Primary DNS

3. Use [K/L] to highlight the item you want to

set.

xxx . xxx . xxx . xxx

Secondary DNS

• ”MAC Address”is for viewing only and cannot

be selected.

xxx . xxx . xxx . xxx

4. Find the instruction for the item from the

following, and set the item.

then press ‘OK’

IP Address Setting / DNS Setting

1. Press [OK] repeatedly to select the desired

setting.

• Enter the DNS addresses provided by your

Internet provider.

• If the DNS address is unknown, check

the DNS address of other devices (e.g. PC

connected via LAN cable) and assign the

same DNS address.

“Auto(DHCP)”: If your router has DHCP server

function, select “Auto(DHCP)”.

“Manual”:

If your router does not have

DHCP server function, select

“Manual”.

d) After you enter all correctly, press [OK].

• Confirmation message will appear. Select

“Yes”to complete the settings.

2. Press [RETURN] to go back to the previous

screen, or press [SETUP] to exit.

If you select “Manual”, follow the following

instruction to set the IP address and DNS.

a) Use [K/L] to select “IP Address”, “Subnet Mask”

or “Default Gateway”, then press [OK]. IP address

setting screen will appear. Enter IP address,

subnet mask and default gateway with cursor

buttons and number buttons.

Note

• The range of input numbers is between 0 and

255.

• If you enter a number larger than 255, the

number will automatically be 255.

Others

IP Address Setting

• The manually entered addresses will be saved

even if you change the setting to “Auto(DHCP)”.

• When you enter a wrong number, press [CLEAR]

to cancel. (The number will be back to “0”.)

• If you want to enter 1 or 2 digit number in one

cell, press [B] to move on to the next cell.

• If the entered IP address or the default gateway

or primary DNS addresses is same as the

default setting, IP address setting will be set to

“Auto(DHCP)”. (The manually entered number

will be saved.)

• When IP address setting is set to “Manual”, the

setting of DNS setting will automatically be

“Manual”and when IP address setting is set to

“Auto(DHCP)”, you can set either “Auto(DHCP)”

or “Manual”for DNS setting.

IP Address

xxx . xxx . xxx . xxx

Subnet Mask

xxx . xxx . xxx . xxx

Default Gateway

xxx . xxx . xxx . xxx

then press ‘OK’

• Enter the IP address number after checking

the specifications of your router.

• If the IP address is unknown, check the IP

address of other devices. (e.g. PC connected

via LAN cable) and assign a different number

from those of other devices.

b) After you enter all correctly, press [OK].

• Confirmation message will appear. Select

“Yes”to complete the settings.

Others

IP Address Setting

Proxy Setting

1.Press [OK] repeatedly to select the desired

setting.

Is Setting OK?

IP Address

xxx.xxx.xxx.xxx

• For default settings, select “Do Not Use”.

• If you need to change the proxy setting as

instructed by your Internet service provider

to set the designated proxy address and port,

select “Use”.

Subnet Mask

Default Gateway

Yes

If you select “Use”, follow the following

instructions to set the proxy address and

proxy port.

Download from Www.Somanuals.com. All Manuals Search And Download.

a) Use [K/L] to select “Proxy Address”, then press

[OK]. Proxy address setting screen will appear.

Enter proxy address.

• For proxy port, certain ports might be closed,

blocked or unusable depending on your

network environment.

• The keyboard screen will appear.

Connection Speed

You can set connection speed as your preference.

(The default setting is “Auto”.)

1. Press [OK] to show the options for

“Connection Speed”.

Others

Proxy Address

2. Use [K/L] to select the desired setting, then

press [OK].

“Auto”:

Set the appropriate connection speed

automatically, in accordance with your network

environment.

Clear

All Clear

a/A/@

[K/L/s/B] :

Move the highlight.

“10BASE Half”:

[the Number buttons] : Enter number.

Set the connection speed to “10BASE Half”.

“10BASE Full”:

[OK] :

Enter the highlighted number/

word.

Set the connection speed to “10BASE Full”.

“100BASE Half”:

[RED] :

[GREEN] :

Clear the entered number or

word.

Set the connection speed to “100BASE Half”.

“100BASE Full”:

Clear all the entered numbers

or words.

Set the connection speed to “100BASE Full”.

3. Press [RETURN] to go back to the previous

screen, or press [SETUP] to exit.

Note

[BLUE] :

[YELLOW] :

Switch between abc ? ABC ? @!?

Set the entered number or

word.

• Choose a connection speed in accordance with

your network environment.

• The network connection may be disabled

depending on the device, when the settings are

changed.

b) After you enter proxy address correctly, press

[YELLOW].

• Confirmation message will appear. Select

“Yes”to complete the settings.

Others

Proxy Address

BD-Live Setting

You can limit Internet access for BD-Live discs.

(The default setting is “Allow”.)

1. Press [OK] to show the options for “BD-Live

Setting”.

Is Setting OK?

xxxxx

2. Use [K/L] to select the desired setting, then

press [OK].

Yes

“Allow”:

Internet access is permitted for all BD-Live

contents.

c) Use [K/L] to select “Proxy Port”, then press

[OK]. Proxy port setting screen will appear. Enter

proxy port number with number buttons.

“Limited Allow”:

Internet access is permitted only for BD-

Live contents which have content owner

certificates. Internet access without the

certificates is prohibited.

Others

Proxy Address

Please select the input Proxy Port.

then press `OK’

“Prohibit”:

Internet access is prohibited for all BD-Live

contents.

xxxxx

3. Press [RETURN] to go back to the previous

screen, or press [SETUP] to exit.

MAC Address

You can check the MAC address of this unit.

“MAC Address”is for viewing only.

 Wireless

If you connect this unit to the network wirelessly, select

“Wireless”and set up necessary settings.

d) After you enter proxy port correctly, press [OK].

2. Press [RETURN] to go back to the previous

screen, or press [SETUP] to exit.

Note

• The range of input numbers for the port

number is between 0 and 65535. (If you enter

a number larger than 65535, it will be regarded

as 65535.)

Download from Www.Somanuals.com. All Manuals Search And Download.

“None”:

In order to use a wireless network, you must set

up the connection to the wireless router.

Set the authentication setting to “None”.

“WEP”:

Set the authentication setting to “WEP”.

“WPA-PSK (TKIP)”:

You must set the wireless router to

infrastructure mode. Refer to page 13

for details.

Set the authentication setting to “WPA-PSK (TKIP)”.

“WPA-PSK (AES)”:

Set the authentication setting to “WPA-PSK (AES)”.

“WPA2-PSK (TKIP)”:

Find wireless network

Search for wireless networks automatically and

select the wireless network name (SSID) from the

list.

Set the authentication setting to “WPA2-PSK

(TKIP)”.

“WPA2-PSK (AES)”:

1. In “Network Connection” menu, use [K/L] to

select “Network Selection”, then press [OK].

2. Use [K/L] to select “Wireless”, then press

[OK].

Set the authentication setting to “WPA2-PSK

(AES)”.

7. “WEP/ WPA Key” entry screen will appear.

Enter the WEP/WPA key of the selected

wireless network using cursor buttons,

number buttons and color key, then press

[YELLOW].

3. Use [K/L] to select “Wireless Router”, then

press [OK].

4. Use [K/L] to select “Find wireless network”,

then press [OK].

• Confirmation message will appear. Select “Yes”

to complete the settings.

• This unit will start searching for wireless

networks automatically.

5. The list of wireless networks will be

displayed. Use [K/L] to select the

appropriate wireless network name (SSID),

then press [OK].

Others

Wireless Router

Is Setting OK?

SSID

WEP/WPA Authentication WPA2-PSK(AES)

WEP/WPA Key

API

• This unit will start searching for the

authentication setting of the selected

wireless network automatically.

**************...

Yes

Others

Find wireless network

AP1

AP2

AP3

AP4

AP5

AP6_Test

8. Following screen will appear. Use [K/L]

to select “Yes”, then press [OK] to go to

“Advanced Settings”.

• For further operation, refer to “Advanced

Settings”on page 43.

1/ 2

Page Down

Others

Find wireless network

If the unit finds the authentication setting of the

selected wireless network, skip to step 7. If the unit

fails to find the authentication setting automatically,

proceed to step 6 to select it manually.

6. Use [K/L] to select the authentication

setting of the selected wireless network,

then press [OK].

Wireless router settings are incomplete.

Please use "Advanced Settings" to complete your setup.

Yes

Others

9. Press [SETUP] to exit.

Find wireless network

Note

WEP/WPA Authentication

None

WEP

WPA-PSK (TKIP)

WPA-PSK (AES)

WPA2-PSK (TKIP)

WPA2-PSK (AES)

• For a wireless network with authentication

setting, key icon appears to the right hand of

the wireless network name (SSID).

• Signal icon shows the strength of the signal.

• WEP/WPA key appears as asterisks on the

confirmation screen.

Manually enter your SSID

• For a wireless network with authentication

setting, select the authentication setting,

according to the security type of the wireless

network.

Set up the connection to the wireless router

manually by entering the wireless network name

(SSID).

1. Follow steps 1 to 3 in “Find wireless network”

• For a wireless network without authentication

setting, select “None”.

on page 42.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Use [K/L] to select “Manually enter your

SSID”, then press [OK].

“IP Address Setting” / “DNS Setting”:

Refer to“IP Address Setting / DNS Setting”on page 40.

“Proxy Setting”:

• Wireless Router Name (SSID) entry screen

will appear. Enter the wireless network name

(SSID) using cursor buttons, number buttons

and color key, then press [YELLOW].

Refer to “Proxy Setting”on page 40.

“BD-Live Setting”:

Refer to “BD-Live Setting”on page 41.

“MAC Address”:

Refer to “MAC Address”on page 41.

Note

• You cannot select “Advanced Settings”if

“Wireless Router”setting is not completed.

 Disable

Others

Manually enter your SSID

Wireless Router Name (SSID)

Deactivate all the network connection and

settings.

Clear

All Clear

a/A/@

1. In “Network Connection” menu, use [K/L] to

select “Network Selection”, then press [OK].

2. Use [K/L] to select “Disable”, then press

[OK].

• List of authentication settings will appear.

3. Follow steps 6 to 9 in “Find wireless network”

on page 42.

3. Press [RETURN] to go back to the previous

screen, or press [SETUP] to exit.

Note

Wireless Router Status

You can check the current status of “Wireless

Router”setting.

• The network connection can be reactivated

by setting network connection to “Wired”or

“Wireless”.

1. Follow steps 1 to 3 in “Find wireless network”

on page 42.

2. Use [K/L] to select “Wireless Router Status”,

then press [OK].

Software Update

• The list of current wireless router settings,

and the confirmation message will appear.

Select “Yes”to complete the settings.

3. Press [RETURN] to go back to the previous

screen, or press [SETUP] to exit.

[SETUP] “Other"“Software Update”

This unit lets you update the software yourself

using a software update disc.

To update the software, you must first download

the latest version software to a disc, then execute

“Software Update”.

After you set up the “Wireless Router”setting,

set the network setting to “Easy”(wireless) or

“Custom”(wireless).

Current Version

You can confirm the current software version.

1. In “Software Update” menu, use [K/L] to

select “Current Version”, then press [OK].

2. Press [OK] or [RETURN] to exit.

Easy (wireless)

To set the network setting to “Easy”(wireless),

follow the following procedure. For details of this

setting, refer to “Easy (Wired)”on page 39.

• If you select “Yes”in step 7 of “Find wireless

network”on page 42, skip to step 3.

1. Follow steps 1 to 2 in “Find wireless network”

on page 42.

 Disc Update

1. Prepare a software update disc:

Access www.magnavox.com, and download

the latest version software to a blank disc by

following the directions described on the site.

• Use a blank disc and download one software

per disc.

2. Use [K/L] to select “Advanced Settings”, then

press [OK].

3. Use [K/L] to select “Easy”, then press [OK].

• For more details on how to download the

software, please refer to the site.

Custom (wireless)

To set the network setting to “Custom”(wireless),

follow the following procedure.

• If you select “Yes”in step 7 of “Find wireless

network”on page 42, skip to step 3.

1. Follow steps 1 to 2 in “Find wireless network”

on page 42.

2. In “Software Update” menu, use [K/L] to

select “Disc Update”, then press [OK].

3. Use [K/L] to select “Yes”, then press [OK].

• Disc tray will open automatically.

4. Insert the software update disc obtained at

step 1.

2. Use [K/L] to select “Advanced Settings”, then

press [OK].

5. After completing loading disc, confirmation

message will appear. Select “Yes” and press

[OK] to start updating.

3. Use [K/L] to select “Custom”, then press

[OK].

6. After the disc update finishes, this unit will

restart and eject the disc.

• For details of each setting, refer to following

pages.

Download from Www.Somanuals.com. All Manuals Search And Download.

The indicators show the progress status...

• The version of Netflix will also be updated

if newer version of Netflix is available when

updating the software.

(Success) PLAY indicator lights up.

STANDBY/ON

STOP

PLAY

Initialize

Menus to reset player settings, format SD card,

clear erased BD-ROM data or network settings,

and deactivate VUDU.

(Error)* PLAY and STANDBY/ON indicators flash.

STANDBY/ON

STOP

PLAY

1. In stop mode, press [SETUP].

2. Use [K/L] to select , then press [OK].

3. Use [K/L] to select a desired option, then

press [OK].

* If the indicator shows Error...

1) Unplug the AC power cord for about 10

seconds, re-plug AC power cord and then turn

the unit on.

2) Confirm the current software version.

3) If the software version is updated, the software

update has succeeded. If not, please try again.

Note

• Please do not unplug the AC power cord while

updating the software.

• All settings will remain the same even if you

update the software version.

• The version of Netflix will also be updated

if newer version of Netflix is available when

updating the software.

 Network Update

You can update the software by connecting the

unit to the Internet.

1. In “Software Update” menu, use [K/L] to

select “Network Update”, then press [OK].

2. Use [K/L] to select “Yes”, then press [OK].

• This unit will then start checking for the latest

software version.

3. Confirmation message will appear. Use

[s/B] to select “Yes”, then press [OK].

• The unit will start downloading the latest

software version.

4. When the download completes, confirmation

message will appear. Press [OK].

• The unit will start updating the software

version.

• It may take a while to complete the updating.

5. After updating finishes, this unit will restart

and open the disc tray automatically.

Note

• In order to update the software via the Internet,

you must connect the unit to the Internet and

set up necessary settings.

• For network connection, refer to “Connection to

the Network”on page 12.

• For network setup, refer to “Network

Connection”on page 39.

• Please do not unplug the AC power cord or LAN

cable while executing the “Network Update”.

• All settings will remain the same even if you

update the software version.

• The disc tray will open automatically after

updating finishes. This is not a malfunction.

“Setup”:

Resets the setup menu to the default.

The setting for “Parental”, “Network

Connection”and “Mode Select”will not be

reset.

“Format SD Card”

(Available only when an SD Memory Card is

inserted.):

Initializes the SD Memory Card. After

confirmation message appears, use [K/L] to

select “Yes”, then press [OK].

“Erase Saved BD-ROM Data (Player)”:

Clears the data saved for the BD-ROM

contents, such as BD-ROM game scores, from

this player.

“Erase Saved BD-ROM Data (SD Card)”

(Available only when an SD Memory Card is

inserted.):

Clears the supplemental data for the BD-ROM

playback, such as subtitle data, from the SD

Memory Card.

“Network Settings”:

Resets the network setting to the default.

“Netflix Deactivate”:

Deactivates the connection to Netflix.

“Vudu Deactivate”:

Deactivates the connection to VUDU.

Initialize

Setup

Format SD Card

Erase Saved BD-ROM Data(Player )

Erase Saved BD-ROM Data(SD Card)

Network Settings

Netﬂix Deactivate

Vudu Deactivate

4. Confirmation message will appear. Use [K/L]

to select “Yes“, then press [OK].

• Press [OK] again to complete the settings.

5. Press [SETUP] to exit.

Note

• Do not remove the SD Memory Card while

executing the “Format SD Card”or the “Erase

Saved BD-ROM Data (SD Card)”. It damages the

card.

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHERS

Troubleshooting

If the unit does not perform properly when operated as instructed in this manual, check the unit,

consulting the following checklist.

Problem

No power.

Solution

- Check if the AC cord is properly connected.

- Unplug the AC cord once, and wait for 5-10 seconds and then plug it

in again.

No sound or picture.

- Check if the connected TV is turned on.

- Check if the connections are made securely and correctly.

- Check whether the connected TV or other device supports HDCP. (This

unit will not output a video signal unless the other device supports

HDCP.)

- Check whether the output format of this unit (HDMI FORMAT) matches

the supported input format of other connected device.

No audio / video signal on the - If the unit is connected to the unauthorized display device with an

display device via HDMI cable. HDMI cable, the audio / video signal may not be output.

- Perform an HDMI cable hotplug, wherein you disconnect the HDMI

cable from the TV and this unit and then reconnect it to both the

devices while they are powered on.

- Ensure that your HDMI cable is certified.

Distorted picture.

- Sometimes a small amount of picture distortion may appear. This is

not a malfunction.

- Connect this unit directly to the TV. If the audio / video cables are

connected to a VCR, pictures may be distorted due to the copy right

protection system.

Completely distorted picture - Make sure the disc is compatible with this unit.

or black / white picture with

BD / DVD.

No sound or distorted sound. - Adjust the volume.

- Check if speakers are connected correctly.

- Check the HDMI connections.

- Check the settings in “Audio”menu.

Picture freezes momentarily

during playback.

- Check the disc for fingerprints / scratches and clean with a soft cloth

wiping from center to edge.

- Clean the disc.

Disc cannot be played back.

- Clean the disc.

- Ensure the disc label is facing up.

- Check if the disc is defective by trying another disc.

- Cancel the ratings control or change the control level.

- Insert a correct disc that can be played back on this unit.

- The format of the card does not match that accepted by this unit or

the card is not compatible.

SD Memory Card cannot be

read.

No return to start-up screen

when disc is removed.

- Reset this unit by turning it off, then on again.

The unit does not respond to - Aim the remote control directly at infrared sensor window on the front

the remote control.

panel.

- Reduce the distance to infrared sensor window.

- Replace the batteries in the remote control.

- Re-insert the batteries with their polarities (+ / - signs) as indicated.

Buttons do not work or the

unit stops responding.

- To completely reset the unit, press and hold [y STANDBY/ON] on the

front panel for 10 seconds to shut down the unit or unplug the AC

cord from the AC outlet for 5-10 seconds.

The unit does not respond to - Operations may not be permitted by the disc. Refer to the instructions

some operating commands

during playback.

of the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem

Solution

The unit cannot read BD /

- Condensation? (Let sit 1 or 2 hours)

DVD/ CD.

- Check if the disc is compatible with this unit.(Refer to page 14.)

- Wipe the dirt off the disc or replace the disc.

Angle does not switch.

- The angle cannot be switched for BD / DVD which do not contain

multiple angles. In some cases multiple angles are only recorded for

specific scenes.

Playback does not start when - Check the settings in “Parental”menu.

the title is selected.

The password for rating level - Enter the default password “4737”, then your forgotten password will

has been forgotten.

Cannot connect to the

network.

be cleared.

- Check if the LAN cable connection is properly made.

- Turn on the modem or broadband router.

- Check the network setting.

- Check if the broadband router and/or modem is correctly connected.

- Check the “BD-Live Setting”.

- When connecting directly to a modem via a LAN cable, you might

need to power cycle the modem to reset settings on the modem.

Cannot use the wireless

connection.

- Once you have activated the wireless connection please wait 30

seconds for the connection to be established after turning on the

unit, before trying to access network features such as BD-Live, Netflix,

Blockbuster or VUDU.

Cannot connect to the

network while my PC is

connected to the network.

The capacity of the SD card

decreased.

- Check the content of your Internet service contract to see if your

Internet service provider prevents multiple terminals connecting at

the same time.

- Data may be written to the SD card when a BD-video that supports the

virtual package is used and an SD card is in the slot.

Cannot use the BD-Live

- Insert an SD card with enough capacity (1GB or more).

function or download of data - Check if an SD card is correctly inserted.

does not perform properly.

- Make sure the write-protect switch on the SD card is not enabled.

Cannot play back BD-video

(BD-ROM Profile 2.0).

- Insert an SD card(1GB or more) which is formatted on this unit.

- Some discs with BD-Live function require memory when playing back

the content.

- Do not remove the card during playback.

- Make sure the write-protect switch on the SD card is not enabled.

Cannot use Netflix feature.

Cannot add movies or TV

- Netflix is available only in the United States.

- Check if the network connection is properly made.

- Visit netflix.com/MAGNAVOX on your PC and become a Netflix

member.

- Visit netflix.com on your PC.

episodes to the instant Queue. - Adding movies or TV episodes on this unit is not available.

Even though the speed of the - The picture quality does not change during playback.

Internet connection improves - The picture quality differs depending on the speed of Internet

during playback, the picture

quality of Netflix streaming

movie does not improve.

The picture quality of

streaming movie (Netflix,

Blockbuster or VUDU) is poor.

Streaming movie (Netflix,

Blockbuster or VUDU) often

stops or starts buffering

during playback.

connection at the time of loading.

- Check the speed of your Internet connection. You need speeds of at

least 8 Mbps to this player for high quality uninterrupted playback.

- Contact your Internet service provider to troubleshoot your Internet

connection for speed and line quality. Consistent line quality and

speed are very important for Internet video playback.

Cannot use Blockbuster

feature.

- Check if the network connection is properly made.

- Visit www.blockbuster.com/auth/login (Blockbuster) on your PC and

create an account.

Cannot use VUDU feature.

- Check if the network connection is properly made.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem

Cannot rent or buy movies /

TV episodes on VUDU.

Solution

- You need to activate the VUDU account. (Refer to page 27)

- Log into your account at http://my.vudu.com and check your payment

information.

Note

• Some functions are not available in specific modes, but this is not a malfunction. Read the description

in this manual for details on correct operations.

• Some functions are prohibited on some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Language

A-B

Code

Language

French [FRE]

Code

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

Language

Macedonian

Code

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

Language

Siswat

Code

6565

6557

6558

6561

5165

6567

6569

65681

Abkhazian

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Frisian

Malagasy

Malay

Slovak [SLO]

Slovenian

Somali

Afar

Galician

Afrikaans

Albanian

Amharic

Arabic

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Malayalam

Maltese

Spanish [SPA]

Sundanese

Swahili

Maori

Marathi

Armenian

Assamese

Aymara

Moldavian

Mongolian

Nauru

Swedish [SWE]

Gujarati

Hausa

Tagalog

Tajik

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Azerbaijani

Bashkir

Hebrew

Nepali

Hindi

Norwegian [NOR]

O-R

Tamil

Basque

Hungarian [HUN]

I-K

Tatar

Bengali;Bangla

Bhutani

Occitan

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

Telugu

Thai

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Oriya

Bihari

Oromo (Afan)

Panjabi

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

Bislama

Breton

Pashto;Pushto

Persian

Bulgarian [BUL]

Burmese

Byelorussian

Irish [IRI]

Italian [ITA]

Japanese [JPN]

Javanese

Kannada

Kashmiri

Kazakh

Polish [POL]

Portuguese[POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

C-E

Cambodian

Catalan

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

U-Z

Ukrainian

Urdu

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Chinese [CHI]

Corsican

Uzbek

Croatian

Kinyarwanda

Kirghiz

Samoan

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

Vietnamese

Volapuk

Welsh

Czech [CZE]

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

Sangho

Kirundi

Sanskrit

Korean [KOR]

Kurdish

Scots Gaelic

Serbian

Wolof

Xhosa

L-N

Serbo-Croatian

Sesotho

Yiddish

Yoruba

Zulu

Laothian

Latin

5861

5847

5868

5860

5866

F-H

Setswana

Shona

Faroese

5261

5256

5255

Latvian;Lettish

Lingala

Fiji

Sindhi

Finnish [FIN]

Lithuanian

Singhalese

Note

• If you choose a language that has a 3-letter-language code (written in bracket), the code will be

displayed every time you change the audio setting on page 24 or subtitle language setting on page 23. If

you choose any other languages, “---”will be displayed instead.

Servicing

• Please refer to relevant topics on “Troubleshooting”on page 45 before returning the product.

• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-

serviceable parts inside. Turn the unit to the standby mode, unplug the power plug, and please

contact 1-800-605-8610 or visit : www.magnavox.com/support

www.funaiservice.com/

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Signal system

NTSC color

Power requirements

Power consumption

Dimensions (width x height x depth)

Weight

120 V AC, 60 Hz

16 W (standby: 0.5 W)

14.2 x 2.0 x 8.5 inches (360 x 50 x 215mm)

4.04 lbs. (1.83 kg)

Operating temperature

Operating humidity

41°F (5°C) to 104°F (40°C)

Less than 80 % (no condensation)

Terminals (Rear)

Video output (RCA jack x 1)

HDMI output (HDMI jack x 1)

Audio output (Analog) (RCA jack x 2)

Audio output (Digital) (RCA jack x 1)

LAN terminal

1 Vp-p (75Ω)

Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio

L/R: 2 Vrms (output impedance: more than 1kΩ)

500 mVp-p (75Ω)

10BASE-T/100BASE-TX

Wireless LAN

IEEE 802.11 b/g/n

Note

• The specifications and design of this product are subject to change without notice.

NETWORK SERVICE DISCLAIMER

Network Service Disclaimer

Content and services made available through this product are transmitted by third parties by means of

networks and transmission facilities over which Company has no control and third party services may

be terminated or interrupted at any time, and Company makes no representation or warranty that any

content or service will remain available for any period of time. Without limiting the generality of this

disclaimer, Company expressly disclaims any responsibility for any interruption or suspension of any

content or service made available through this product. Company is not responsible for customer service

related to the content and services. Any question or request for service relating to the content or services

should be made directly to the respective content and service providers.

THIRD PARTY CONTENT AND SERVICES MADE AVAILABLE THROUGH THIS PRODUCT ARE PROVIDED

“AS IS.”COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, FOR ANY PURPOSE

WHATSOEVER. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED INCLUDING

WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ACCURACY, VALIDITY, TIMELINESS, LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR SERVICE

MADE AVAILABLE THROUGH THIS PRODUCT.

IN NO EVENT SHALL COMPANY BE LIABLE FOR, ANY DAMAGES, WHETHER ARISING IN CONTRACT

OR TORT, INCLUDING WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES, LOST PROFITS, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES

ARISING OUT OF, OR IN CONNECTION WITH, ANY CONTENT (OR ANY INFORMATION CONTAINED

THEREIN) OR SERVICE PROVIDED TO THE USER OR ANY THIRD PARTY, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

All content and services accessible through this product belong to third parties and are protected by

provided solely for the User’s personal noncommercial use. User may not use any content or services in

a manner that has not been authorized by the content owner or service provider. Without limiting the

foregoing, unless expressly authorized by the applicable content owner or service provider, you may

not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or

distribute in any manner or medium any content or services made available through this product.

Download from Www.Somanuals.com. All Manuals Search And Download.

Códigos de Región

ESPAÑOL

Esta unidad se ha diseñado para reproducir BD-

vídeo con región “A”y DVD-vídeo con región “1”o

“ALL”. No podrá reproducir BD-vídeo o DVD-vídeo

que estén tituladas para otras regiones. Busque

los símboloes de su BD-vídeo o DVD-vídeo.

Si estos símbolos de regiones no aparecen en su

BD-vídeo o DVD-vídeo, no puede reproducir el

disco en esta unidad. El número o letra dentro del

globo se refiere a la región del mundo. Un BD-

vídeo o DVD-vídeo etiquetado para una región

específica solamente puede reproducirse en

unidades que tengan el mismo código de región.

Discos Reproducibles

Este aparato es compatible con la reproducción

de los siguientes discos y archivos.

Discos y Archivos Reproducibles

Discos reproducibles

Discos Blu-ray

- BD-vídeo (capa simple / doble)

- BD-RE ver. 2.1 (capa simple / doble)

(Grabado en formato BDMV)

- BD-R ver. 1.1 / 1.2 / 1.3 (capa simple / doble)

(Grabado en formato BDMV) (Los discos no

cerrados pueden no reproducirse.)

Encontrar el Canal de Vídeo en su Televisor

Una vez finalizadas todas las conexiones, debe

localizar el canal de vídeo correspondiente en su

televisor (canal de entrada externa).

1. Una vez que haya realizado todas las

conexiones correspondientes, pulse

[STANDBY/ON y ] para encender la unidad.

2. Encienda su televisor.

3. Pulse el botón del mando a distancia

del televisor que da acceso al canal de

entrada externa. Puede tener el nombre

de “SOURCE”, “AV” o “SELECT” (consulte el

manual del usuario de su televisor).

DVD-vídeo

DVD-RW

DVD-R

CD-DA (CD de sonido)

CD-RW

CD-R

KODAK Picture CD

DTS-CD

Archivos reproducibles

AVCHD

Soportes

DVD-RW/-R

Tarjeta de

memoria SD

(incluido SDHC),

Tarjeta miniSD,

Tarjeta microSD

Watch HD movies

Windows Media ^TMAudio

JPEG

BD-RW/-R

DVD-RW/-R

CD-RW/-R

Tarjeta de

memoria SD

(incluido SDHC),

Tarjeta miniSD,

Tarjeta microSD

Ajusta el idioma para el menú del

reproductor

1. En modo detención, pulse [SETUP].

2. Utilice [K/L] para seleccionar y después

pulse [OK].

3. Utilice [K/L] para seleccionar “Player Menu”

y después pulse [OK].

Tarjetas legibles

Archivos / datos

reproducibles

AVCHD, Windows

Media^TMAudio,

JPEG, comentario

en imágenes,

subtítulos u otros

extras del BD-

ROM ver.2(profile

2.0 / profile 1.1)

Tarjeta de memoria SD

(8 MB - 2 GB)

Tarjeta de memoria SDHC

(4 GB - 8 GB)

Tarjeta miniSD (8 MB - 2 GB)

Tarjeta microSD (8 MB - 2 GB)

Quick

Mode Select

Disc

HDMI Audio Out

HDMI Multi(Normal)

HDMI Video Resolution Auto

Player Menu

Network Selection

English

Wired

4. Utilice [K/L] para seleccionar su idioma

deseado, y luego presione [OK].

5. Pulse [SETUP] para salir.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reproducción Directa

1. Presione [OPEN/CLOSE A] para abrir la

bandeja de discos e insertar su disco con

el rótulo apuntando hacia arriba. Presione

de nuevo [OPEN/CLOSE A] para cerrar la

bandeja de discos.

• Asegúrese de que el disco sea compatible

con este aparato.

2. Es posible que la reproducción comience

automáticamente.

• De lo contrario, pulse [B(reproducir)].

Para pausar la reproducción:

Pulse [F(pausar)].

Para retomar la reproducción normal:

Pulse [B(reproducir)].

Para detener la reproducción:

Pulse [C(detener)].

Reproducción se encuentra en el modo

Reanudar-Detención.

3. Para detener momentáneamente la

reproducción presione [STOP C] una vez.

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or

workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from

the date of original retail purchase. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the

date of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR

OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO

OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced,

defaced, missing or if service was attempted by an unauthorized service center. This limited warranty

does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during

normal use. It does not cover damage which occurs in shipment, or failures which are caused by

repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident,

misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance,

commercial use such as hotel, rental or office use of this product, or damage which results from fire,

flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL

OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED

STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE

CENTER.

THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF

NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS

WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT

VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO

OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT

PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either

its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED

SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service

providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please

FUNAI SERVICE CORPORATION

Tel: 1-800-605-8610

www.magnavox.com/support

www.funaiservice.com/

2200 Spiegel Drive Groveport, OH 43125

E5S20UD 1VMN29953B ★★

Printed in China

Download from Www.Somanuals.com. All Manuals Search And Downlo¹ad.

EarthStone Oven 110 Modular User Manual
Electro Voice Stereo Amplifier AP2200 User Manual
Everex Laptop Stepnote NC User Manual
Extron electronic Stereo Amplifier PA 250 User Manual
Fagor America Electric Pressure Cooker uCOOK PRESSURE COOKER SET User Manual
Fiesta Gas Grill EZT40050 B416 User Manual
Frigidaire Microwave Oven FGMV175QF User Manual
GE Beverage Dispenser Wine Chiller User Manual
Genelec Portable Speaker 1031A User Manual
Genesis Advanced Technologies Speaker System Monitor 2 User Manual