| Sync ProceSSorS   VSS 100   Video Sync Separator   FeatUres   sPeciFications   video   • Separates TTL sync signal from composite video, S-video, component video,   RGsB, or SCART - RGB with composite video signals   Gain................................ Unity   Bandwidth ........................ 6 MHz (-3 dB)   • • • • • • • • • Input: Composite video on a BNC with loop-through   Output: Composite sync on a BNC   video inPUt   Number / signal type ........... 1 Gs (green and sync from RGsB),   Y (luma signal from component video or S-video), or composite video   Connectors ....................... 1 BNC female   Nominal level .................... 1 Vp-p   Minimum / maximum levels .. Analog: 0.4 V to 2.0 Vp-p with no offset   Impedance........................ 75 ohms   Horizontal frequency............ 15.6 kHz to 17.75 kHz   Vertical frequency............... 50 Hz to 60 Hz   450 MHz (-3 dB) video bandwidth   Enables DSVP™ - Digital Sync Validation Processing verification   BNC input and output connectors   Input loop-through   video oUtPUt   Power LED indicator   Number / signal type ........... 1 loop-through Gs (green and sync from RGsB), Y (luma signal from component   video or S-video), or composite video and   1 composite sync output (see sync section)   Connectors ....................... 1 BNC female   Compact enclosure   External universal power supply included, part # 70-055-01   Nominal level .................... 1 Vp-p   Minimum / maximum levels .. 0.4 V to 2.0 Vp-p with no offset, follows input   Impedance........................ 75 ohms   Return loss ....................... -38 dB @ 5 MHz   descriPtion   The Extron VSS 100 Video Sync Separator is for systems that use video formats with embedded   sync, in particular with the SCART connector found in Europe. Sources such as DVD players with   RGB and composite video output on a SCART connector can now be used with RGB switchers   like the Extron System 7SC. Simply use the RGB output of the DVD player and composite sync   output from the VSS 100. The VSS 100 also extracts the sync signal from RGsB, component   video, S-video, or composite video inputs. It then outputs the composite sync signal, at TTL   levels, on a separate signal line. The original video signal is looped through unchanged.   sync   Input type......................... Gs (green and sync from RGsB), Y (luma signal from component video or   S-video), or composite video   Output type....................... 1 loop-through Gs (green and sync from RGsB), Y (luma signal from component   video or S-video), or composite video   1 composite sync output on 1 BNC female connector   Standards......................... NTSC 3.58, NTSC 4.43, PAL, SECAM   Input level ........................ 0.3 Vp-p (sync portion only)   Output level ...................... TTL: 5.0 Vp-p, unterminated   Input impedance ................ 75 ohms   Output impedance .............. 75 ohms   Max. propagation delay........ 50 ns   Max. rise / Fall time............. 2.5 ns   Polarity ............................ Negative   Systems can take advantage of Extron technologies that depend on a separate sync input such   as the DSVP™ - Digital Sync Validation Processing feature on the Extron CrossPoint 450 Plus   matrix switchers. Exclusive to Extron, DSVP confirms that input sources are active by scanning   all sync inputs for active signals. DSVP provides instantaneous frequency feedback for   composite sync or separate horizontal and vertical sync signals via the switcher's RS-232 and   RS-422 or Ethernet port.   general   External power supply ......... 100 VAC to 240 VAC, 50/60 Hz, external, universal; to 12 VDC, 1.0 A, regulated   Power input requirements..... 12 VDC, 0.25 A   Rack mount ...................... No   Enclosure type................... Plastic   Enclosure dimensions.......... 1.0" H x 2.3" W x 3.6" D   2.5 cm H x 5.8 cm W x 9.1 cm D (Depth excludes connectors.)   Product / Shipping weight..... 0.5 lbs (0.2 kg) / 2 lbs (1 kg)   The VSS 100 fits behind a rack-mounted Extron switcher. For easy integration into the system,   it includes a 6 inch male-to-male BNC cable. The sync separator has an external, international   power supply that can drive up to four VSS 100s.   Extron   CrossPoint 450 Plus 128 HVA   Matrix Switcher   Projector   8 7 6 5 Composite Video   Output   4 3 2 1 2 1 1 1 0 1 9 Composite   Video   8 7 6 5 4 3 2 1 Composite   Sync   DVD   S S V Extron   VSS 100   Video Sync Separator   Model   version descriPtion   Part #   VSS 100   Video Sync Separator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-462-01   612   USA West   USA East   +1.919.863.1794 / +800.633.9876   +1.919.863.1797 FAX   © 2008 Extron Electronics. All rights reserved.   +1.714.491.1500 / +800.633.9876   +1.714.491.1517 FAX   Pricing and specifications may change without notice.   Download from Www.Somanuals.com. All Manuals Search And Download.   |