Model
V1925H
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of the original purchase, when utilized for
normal household use, subject to the following conditions, exclusions and exceptions.
If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, return the complete appliance and accessories, freight prepaid to:
Cordless Sweeper
In US:
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, N.Y. 12901
In Canada: EURO-PRO Operating LLC, 4400 Bois Franc, St Laurent, Qc, H9S 1A7
with No Touch Dust Cup
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC
will repair or replace it free of charge. Proof of purchase date must be included. *
OWNER’S MANUAL
Model: V1925H
Non-durable parts including, without limitation, dust cups and brushes which normally require
replacement are specifically excluded from warranty.
4.8 Volt d.c
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or
replacement of the unit at our option. This warranty does not cover normal wear of parts and
does not apply to any unit that has been tampered with or used for commercial purposes. This
limited warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This warranty does not cover damage
or defects caused by or resulting from damages from shipping or repairs, service or alterations to
the product or any of its parts, which have been performed by a repair person not authorized by
EURO-PRO Operating LLC.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event
is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states/provinces do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state or province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof
of purchase date and to attach tag to item before packing with your name, complete
address and phone number with a note giving purchase information, model number and
what you believe is the problem with item. We recommend you insure the package (as
damage in shipping is not covered by your warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products,
therefore the specifications contained herein are subject to change without notice.
OWNERSHIP REGISTRATION CARD
Please fill out and mail the product registration card within ten (10) days of purchase. The
registration will enable us to contact you in the unlikely event of a product safety notification. By
returning this card you acknowledge to have read and understood the instructions for use, and
warnings set forth in the accompanying instructions. RETURN TO:
EURO-PRO Operating LLC, 94 MAIN MILL STREET, DOOR 16, PLATTSBURGH, NY 12901
V1925H
_____________________________________________________________________
Appliance model
_____________________________________________________________________
Date purchased
Name of store
_____________________________________________________________________
Owner’s name
_____________________________________________________________________
USA:
EURO-PRO OPERATING LLC
Canada: EURO-PRO OPERATING LLC
4400 Bois Franc
94 Main Mill Street, Door 16
Plattsburg, NY 12901
St. Laurent, QC H4S 1A7
Address
City
State
Zip Code
Tel.: 1 (800) 798-7398
COPYRIGHT © EURO-PRO OPERATING LLC 2006
11
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Cordless Sweeper
Maintenance & Cleaning Instructions
Maintenance and Cleaning Instructions
To improve the performance and life of your unit, we recommend you do the
following:
1. Periodically remove the transparent brush cover on the front of the cordless
sweeper and remove any build up of lint, hair or fiber on the rotating brush. To
remove the cover - grip the cover from the bottom, pull out and upward until the
cover unlocks from the side slots and tabs located on the top of the sweeper.
Carefully cut away threads or hair with scissors. (Fig. 9)
Fig. 9
2. Once a month clean the unit with a dry cloth, including the chamber which the
dust cup container fits into. Remove any hair, fiber or other materials that may
have built up in the chamber, and on the rotating brush.
3. Do not use abrasive materials to clean the sweeper. Do not immerse the unit
in water.
1. Handle
2. Handle Extension Tube
3. Extension Tube
4. Dust Cup Empty Button
5. Lower Extension Tube
6. Steering Pivot
4. Do not pick up liquids or use on wet floors.
5. Do not use on concrete, tar or similar rough surfaces.
6. Do not pick up pieces of string or fabrics with the sweeper.
7. Do not clean tasseled or frayed carpets with the sweeper.
Caution: Do not accidentally turn unit on while cleaning.
Caution: Any electronic or electrical appliance should not be stored in or
exposed to areas of high heat or humidity. Do not store your cordless sweeper
close to stoves, radiators, furnaces or in a bathroom or bathing area.
7. On/Off Button
8. Charging Light Indicator
9. Transparent Brush Cover
10. Rotating Brush
11. Dust Cup Container
12. Dust Cup Release Button
* Illustrations may differ from actual product.
NOTE: The cordless sweeper is shipped with the batteries uncharged.
Charging of the unit for 20 hours prior to first use is required.
Use replacement battery # XBV1925H only.
9
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Operating Instructions
Assembling Your Cordless Sweeper
Cleaning The Dust Cup Container
To achieve the best performance, empty the dust cup container after each use.
1. Press the dust cup release button with your foot. (Fig. 7)
Note: Be careful not to accidentally turn the unit on.
Your cordless sweeper will require very little assembly. You should remove it from the
carton and familiarize yourself with all the components listed per the exploded view
drawing (page 2). This will help you in the assembly and operation of your cordless
sweeper.
Note: The charging adapter is shipped inside the packaging.
Note: The lower extension tube has the dust cup empty button on it. This tube
should be inserted into the steering pivot.
1. Insert the lower extension tube into the steering pivot so that the tab snaps into
place. (Fig. 1a) Push the extension tube into the lower extension tube. (Fig. 1b)
Insert the extension tube into the lower extension tube. (Fig. 1) Insert the handle
into the handle extension tube.
Fig. 7
2. Lift out the dust cup container, which is connected to the steering pivot. Hold
over a trash bin and push down on the dust cup empty button located on the
lower extension tube. (Fig. 8)
Dust Cup
Empty Button
Insert into
steering pivot
Fig. 1b
Fig. 1a
Fig. 8
3. Replace the dust cup by positioning it onto the sweeper power head and press
down firmly until it snaps back into place.
Fig. 1
2. Place the handle into the upward storage position.
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Operating Instructions
How To Operate Your Cordless Sweeper
Charging Instructions
1. Before using, please ensure that the cordless sweeper has been initially
charged for 20 hours. Your cordless sweeper will only operate properly when the
batteries are fully charged. Your sweeper will operate for varying lengths of time
on a full charge. This will depend upon the type of surface being cleaned (longer
operating time on bare floors vs. carpets).
1. Connect the charger plug to the charging jack or hole on the backside of the
sweeper. Plug the charging adapter into the wall outlet. (120V., 60Hz.) Use only
K-TEC Charger KA12D075015023U. (Fig. 2)
2. Push the On/Off switch to operate the unit. To turn off, press switch again. (Fig. 5)
Charging
Light
Indicator
On/Off Button
Fig. 2
Fig. 5
2. This cordless sweeper is powered by Ni-Cd batteries. Before first use, they must
3. To release the handle to a comfortable position, gently apply pressure to
the top of the sweeper head with your foot while pulling back on the handle.
(Fig. 6)
be charged for a minimum 20 hours.
3. When recharging the unit, the unit must be turned off.
4. The charging light indicator on the top of the sweeper will illuminate to indicate
that the sweeper is properly charging.
5. To recharge, repeat step #1 above. Charging times will vary depending upon the
amount of usage between charging cycles.
Note: If when you place the sweeper to recharge and the charging indicator light
does NOT illuminate, then press the On/Off button once to turn the sweeper off. The
charging indicator light should now light up.
Note: Peak performance may only be realized after the unit has been charged and
discharged two (2) or three (3) times.
Important: To maintain peak performance of your cordless sweeper, it is
recommended that the unit be fully discharged, then completely re-charged at least
once a month.
Fig. 6
Caution:
•
•
•
•
•
Use only the adaptor supplied with the sweeper.
Do not clean the sweeper while unit is charging.
Do not attempt to remove the battery pack from the unit to charge it.
Never attempt to throw the battery pack or unit into a fire or incinerate it.
Do not attempt to remove or damage the battery casing.
7
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Operating Instructions
To Maximize The Life Of Your Ni-cd Batteries
Removal of Battery Pack
1. Turn unit over so that the base is facing upwards.
1. Charge for a minimum of 20 hours before initial use. Failure to do so will reduce
the product’s battery life significantly.
Be careful not to turn the unit ON.
2. Do not store the unit with the charging adaptor attached and plugged in.
2. Push in locking tab and lift off the battery compartment cover. (Fig. 3)
3. Only recharge when the batteries are fully discharged (or as close to fully
discharged as possible).
Battery Pack
Compartment Cover
4. Do not store in areas of high temperature or humidity.
Locking Tab
5. After three (3) months of storage, the product should be fully discharged and then
recharged to maximize battery power.
6. Use only the charger supplied with the product. If other chargers are used, the
batteries can fail causing damage to the battery, product or personal property.
7. Ni-Cd batteries have a long useful life but at some time they will need to be
replaced. To purchase replacement batteries and parts call customer service at:
1 (800) 798-7398.
Fig. 3
Note: If the product has never been used or has been stored for an extended period
of time without use – it will take several complete charge and discharge cycles to
realize the full operational time of your product.
3. Carefully lift out the battery pack and disconnect the wire terminals by pulling
apart the wire terminal connector. Remove the battery pack from the unit. (Fig. 4)
Battery Removal & Disposal
Wire Terminal Connector
Note: If uncertain as to how to remove your battery pack, we suggest you take your
sweeper to a reputable small appliance service technician to have this service
performed.
Follow the steps in “Removal of Battery Pack” when battery removal is required.
This sweeper is equipped with Ni-Cd batteries and you need to dispose of them
properly. When the batteries are no longer good for use, they must be removed from
the sweeper for disposal. Do not remove the batteries for any reason other than
disposal of them. Call your nearest recycling center for information on the
recycling and disposal of Ni-Cd batteries.
Fig. 4
4. Connect the wire terminal connector from the unit to the wire terminal connector
of the new battery pack, and replace the battery pack into the unit. Replace the
cover and press until it snaps in place.
Warning: You must never use ordinary batteries for replacement as these may leak
and cause damage. Use only battery pack XBV1925H provided for replacement.
5. Follow instructions for initial battery charging. Please call customer service at
1 (800) 798-7398 if there are any problems removing batteries.
DO NOT ATTEMPT TO REPLACE THE BATTERIES USED IN THIS PRODUCT
WITH ANY OTHER TYPE OF BATTERY.
Important: This appliance contains Ni-Cd batteries. The batteries must be
recycled or disposed of in accordance with local regulations. Please consult
your Yellow Pages or local recycling center for more information.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|