Hard Surface Steam Cleaner
OWNER’S MANUAL
Model: S3306H
120V., 60Hz, 1500 Watts
EURO-PRO Operating LLC
U.S.: 94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Canada: 4400 Bois-Franc
St-Laurent, QC H4S 1A7
Tel. : 1 (800) 798-7398
Copyright © Euro-Pro Operating LLC 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON HOW TO USE YOUR SYSTEM
IMPORTANT SAFETY INSTRUCTIONS
When using your Steam Cleaner, basic safety precautions should always be
observed, including the following:
ALWAYS FINISH CLEANING BY WIPING DOWN THE CLEANED SURFACE
WITH A TOWEL
1. Read all instructions before using your
steam cleaner.
To reduce the risk of fire, electric shock, or
injury:
2. Use the system only for its intended use.
3. To protect against a risk of electric shock,
do not immerse any part of the system in
water or other liquids.
4. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.
•
Do not leave the steam cleaner plugged
in when unattended. Unplug the electrical
cord when not in use and before servicing or
refilling water tank.
Do not allow to be used as a toy. Close
attention is necessary when used by or near
children, pets or plants.
Use only as described in this manual. Use
only manufacturer’s recommended
accessories.
Do not pull cord, use cord as a handle,
close a door on cord, or pull cord around
sharp edges or corners. Keep cord away
from heated surfaces.
Do not use extension cords or outlets with
inadequate current carrying capacity.
Do turn off all controls as applicable before
unplugging from electrical outlet.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Do not handle plug or steam cleaner with
wet hands or operate without shoes.
Do not put any objects into openings. Do
not use with any opening blocked.
ALWAYS STORE YOUR APPLIANCE
INDOORS in a cool, dry area.
Refrigerator - Use the concentrator to
blow away dirt in the ice machine and
on door seals. The vapor will not dry
out or crack the seals as chemicals
often do. Can openers and other
kitchen equipment can be easily
cleaned with the bristle brush to get into
all the nooks and crannies. Mold stains
around door gaskets can be removed
with the bristle brush.
To clean microwaves or other small
appliances use the nylon bristle brush
for small areas.
Note: When cleaning small electrical
appliances always unplug them from
outlet before cleaning. Do not direct
steam into any openings of the
appliances.
Hints
The steam cleaner has many uses that
have not been mentioned. This was
meant only to give you a general idea of
what can be achieved with the unit.
However, the ways in which to use the
attachments and brushes are in most
cases universal. It is most helpful to
always have a terry cloth towel or paper
towel ready to use for removal of
moisture and residue. 100% white
cotton towels work best.
You can clean the brushes with your
steam cleaner. When cleaning the
bristle brushes, use a pair of pliers to
hold and blow dirt as above or place in
the basket of your dishwasher.
•
•
•
5. Do not allow cord to touch hot surfaces.
Let the system cool completely before
putting away or opening water tank
(removing the safety cap). Wrap cord
loosely around system when storing.
6. Always disconnect system from electrical
outlet when filling with water or emptying
and when not in use. Always turn the
safety cap slowly when opening the water
tank. This will allow any remaining steam
to escape gradually.
7. Do not operate the system with a damaged
cord or plug, or if the appliance or any other
part of the system has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble or attempt to
repair the steam cleaner. Return the
system to EURO-PRO Operating LLC (see
warranty) for examination and repair.
Incorrect re-assembly or repair can cause a
risk of electrical shock or injury to persons
when the steam cleaner is used.
8. Close supervision is necessary for any
appliance being used by or near children.
Do not leave the system unattended while
connected to electrical outlet or when hot.
9. Burns can occur from touching hot metal
parts, hot water or steam. Use caution
when draining unit after use as there may
be hot water in the unit. Never direct steam
at any person. The steam is very hot and
can cause burns.
10. Do not operate in the presence of
explosive and/or flammable fumes.
11. This appliance is intended only for
household use. Follow all user instructions
in this manual.
•
•
•
•
•
•
Note: Wipe with a towel immediately
before the cleaned area dries. When
cleaning the oven, use the bristle brush
to clean around the elements and drip
trays. Use the bristle brush for cracks,
crevices, and hard to reach areas.
To clean counter tops, use the bristle
brush first in order to loosen the debris,
then wipe with a terry cloth towel to
finish.
•
•
Do keep your work area well lit.
Do Not turn the appliance over or on its
side. Never direct steam towards people,
animals or plants.
Do not immerse the steam cleaner into
water or other liquids. Always unplug the
power cord from the electrical socket when
filling the steam cleaner.
Do NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe
for use. Use tap water or distilled/purified
water if the tap water in your area is very
hard.
ORDERING SUPPLIES
•
•
If you need to order supplies such as steam pocket towels, etc. please call
the customer service number at 1 (800) 798-7398.
12. Never use any chemicals or substance
other than tap water in the machine. Use of
chemicals may damage the machine. Use
of chemicals will automatically void your
warranty.
SAVE THESE INSTRUCTIONS
For Household Use Only
12
1
Rev. 04/06
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON HOW TO USE YOUR SYSTEM
ADDITIONAL IMPORTANT SAFEGUARDS
Fiberglass or Stainless Steel Surfaces
Blinds
1. To avoid circuit overload, do not operate another appliance on the same socket
(circuit) as the steam cleaner.
2. If an extension cord is absolutely necessary, an extension cord rated a minimum
of 15 ampere, 14 gage cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange cord so that it cannot be pulled or
tripped over.
Use the bristle brush. Slowly move the
brush over the surface to be cleaned.
The vapor will emulsify the dirt and
grease on the surface. Follow behind
with a terry cloth towel over the brush to
remove excess moisture and residue.
Tip: An old idea for polishing stainless
steel is to wipe it down with seltzer soda
water after it is cleaned.
Use the nylon bristle brush to clean
blinds. Move the brush over the
surface, allowing enough time for the
vapor to penetrate. Work quickly on
PVC blinds. Test for color fastness on
fabric blinds before using. Finish by
wiping with a towel.
3. Do not leave unattended when the system is connected to a power
supply/electrical outlet.
Automotive
For detailing the wheels, use the
concentrator and the bristle brush.
Exterior windows are cleaned best by
applying the vapor with the concentrator
and following with a paper towel.
To clean bicycles, use the bristle brush.
To clean equipment, use the bristle
brush, depending on the surface area.
Finish by wiping down with a towel.
WARNING: This appliance is equipped with a grounded,
type 3-wire cord (3-prong plug). This plug will only fit into an
electrical outlet made for a 3-prong plug. This is a safety
feature. If the plug should fail to fit the outlet, contact an
electrician to replace the outlet. Do not attempt to defeat the
safety purpose of the grounding pin, part of the 3-prong plug.
Bathroom Areas
To clean the bathtub or shower area, use
the bristle brush for grout, shower door
tracks, hard to get areas and heavily
soiled areas. The dual edge window/tile
squeegee will be the most efficient way
to clean the rest of the area. Allow plenty
of time for the heat to penetrate the
surface. This is especially helpful in the
shower area if there is tile or grout. Wipe
with towel.
Removal of soap scum on tile, grout, and
shower doors is also easier with the
steam cleaner.
To clean sanitary fixtures, use the
concentrator with or without bristle brush.
Use a terry cloth towel or paper towel to
wipe up excess moisture and residue.
To clean the sink and faucets, use bristle
brush then finish by wiping with a towel.
Artificial Plants
Use the concentrator without a brush
attached to blow off the dust and dirt.
CAUTION: Always drain condensed water from hose
before use or if unit has been left idle for a period of time. To
drain hose, direct nozzle into an appropriate container or sink
and depress hand grip steam trigger. Once hose has been
drained, normal use may be resumed. Never direct nozzle
towards people, animals or plants.
Nicotine and Tar
Nicotine and tar dissolves at high
temperatures and becomes a light
yellow oil that has the consistency of
sewing machine oil. When the
nicotine/tar film is touched by steam
pocket, it immediately dissolves and
flows into the steam pocket towel. You
can remove it from flat surfaces as fast
as you can move the steam pocket over
the surface.
WARNING: Your Steam Cleaner is designed to clean hard surfaces
and upholstery that will withstand high heat. Do not use on soft plastics
and cold glass. On surfaces that have been treated with wax or some no
wax floors, the sheen may be removed by the heat and steam action. Do
not use on unsealed wood. This could cause the wood grain to rise. It is
therefore recommended to test an isolated area of the surface to be
cleaned before proceeding.
Soap Scum
Soap scum dissolves almost immediately
under a combination of heat and
moisture. Rinse the surface with a small
amount of water afterwards or go back
over it once more with a clean terry cloth
towel.
Note: Soap scum sometimes will
develop a hard surface from waterborne
minerals. If this is the case, use the
bristle brush to break up this surface - or
spray or wipe first with lemon, vinegar or
seltzer soda water to soften the minerals.
Moving too slowly can dry out the soap
scum and cause it to granulate on the
surface. The surface will have a gritty
feel. If this happens, apply vapor to the
surface with the bristle brush again and
re-clean.
Removing Wax, Tar, Etc.
Many stains are only stuck on the
surface of materials and can be easily
and quickly removed by “blowing”
excess material away from the surface
from the side. This is accomplished by
using the concentrator. Hold the terry
cloth towel to the side to catch the loose
residue as it is blown by the
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or
any other chemicals to the water used in this appliance. Use regular water or
distilled/purified water if the tap water in your area is very hard.
WARNING: Danger of Scalding. Please use caution when using
concentrator.
the steam cleaner. The steam emitted from the openings is very hot.
Note: Always vacuum any loose
residue off the surface before you apply
vapor to it.
SAVE THESE INSTRUCTIONS
Garden Furniture
FOR HOUSEHOLD USE ONLY
Use any of the brushes depending on the
surface area. Work quickly when
cleaning resin outdoor furniture. Finish by
wiping with a towel.
2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON HOW TO USE YOUR SYSTEM
GETTING TO KNOW YOUR STEAM CLEANER
Wood, Vinyl and Marble Floors
Spot Cleaning (Carpets)
Use the Steam Pocket ™ to clean wood,
vinyl and marble floors. Move the
Steam Pocket™ across the floor as if
you are mopping. When one side of the
towel is soiled, turn the Steam Pocket™
frame and use the other side. One of
the great advantages of using our
Steam Pocket™ is that your floor will dry
faster than if you used a mop or other
floor cleaning device. It is normal that
some moisture may be left behind
depending on how quickly you move the
Steam Pocket™ across the floor and the
relative heat and humidity of the room.
Be sure to move quickly and steadily
over wood, linoleum and vinyl flooring to
avoid damaging the surface and
Use the concentrator with or without the
bristle brush. Move slowly over the soiled
area, allowing the steam to penetrate.
Agitate with bristle brush or clean towel.
Dab the spot with the towel (do not rub).
Repeat as necessary to remove stain.
Vacuum only after the carpet has
completely dried.
Always test color fastness of carpet in an
inconspicuous area before cleaning.
If your steam cleaner fails to remove
stubborn stains a commercially available
carpet shampoo may be required. Do
NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe
for use.
removing wax.
To Clean Waxed Floors: Use the
Steam Pocket™ with quick strokes.
This will cause the dirt to be removed
but not the wax.
Vinyl Floors: Do not allow heat to build
up in any kind of vinyl since it can soften
it enough to affect its texture. Work fast
on vinyl.
Tile Floors: Use the concentrator with
the bristle brush. Have the Steam
Pocket™ ready as well. Clean the grout
between the tiles with the bristle brush.
Remove the concentrator and bristle
brush and attach the hose and Steam
Pocket™. Move the Steam Pocket™
across the floor to clean the tile and
remove excess moisture and residue.
Caution: Always determine the color-
fastness of any fabric-especially with
reds or blues - by taking a clean, moist,
warm towel and gently rubbing a small
area as far down on the back or other out
of the way place on the furniture as
possible. If color comes off on the towel,
you may need to have the piece dry
cleaned.
Window, Glass Surfaces and Mirrors
Use the window squeegee. Work with
the vapor jet on using the top to bottom
movements. Use the squeegee with the
vapor off to clear the water from the
glass. To do this without leaving streaks,
use lateral movements from the top to
the bottom of the surface.
1. Main Unit
2. Handle
3. Safety Cap
4. Steam Ready Light
5. On/Off Power Switch
6. Hand Grip
7. Steam Trigger Lock
8. Steam Trigger
9. Flexible Hose
10. Extension Tubes (x2)
11. Extended Concentrator
12. Nylon Bristle Brush (x2)
13. Window Squeegee
14. Steam Pocket Angle Adapter
15. Steam Pocket Frame
16. Steam Pocket Towel
17 Funnel
Caution: When cleaning windows,
always avoid any sudden changes in
temperature to prevent glass breakage or
cracks.
18. Measuring Cup
19. Shoulder Strap
Technical Specifications
Voltage:
Power:
120V., 60Hz.
1500 Watts
Water Capacity:
16 US fl. oz. (500 ml.)
* Illustrations may differ from actual product.
10
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES OF STEAM CLEANER
TIPS ON HOW TO USE YOUR SYSTEM
Water
Care and Maintenance
If you consistently use distilled water,
cleaning the tank is unnecessary.
1.Multipurpose Steam Cleaner:
3. Heavy-duty crush-resistant
hose.
•
Use tap water for all your cleaning
Bathrooms, kitchens, living areas,
pet areas and appliances.
needs.
•
However, if you live in an area with
hard water, use distilled water
when steaming light colored
fabrics to eliminate the possibility
of hard water stains.
Automotive, patio and windows.
Rinsing Out the Steam Cleaner
Normally, a periodic rinse of your steam
cleaner will free it from deposits. This is
recommended every 10-15 tankfulls, to
free up any scale deposits from the tank.
Fill the boiler with 8 oz. (125 ml) of water
and shake the cleaner vigorously. Tilt
the cleaner upside down to empty the
boiler of water and any scale deposits.
2. Lightweight & Portable
Important: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the water used in
this appliance. Use tap water or
distilled water if the tap water in your
area is very hard.
Descaling Your Steam Cleaner
If the tap water in you area contains a
high level of calcium deposits and you
have been using tap water to do your
steam cleaning, you should descale your
unit after 10-15 tankfulls.
4. Versatile, quick-change
accessories
Efficient Work
•
For vertical surfaces, wipe with a
towel from the top down, in this
way the dirty water will not soil
surfaces already cleaned.
•
•
•
Avoid changing brushes back and
forth while cleaning.
Start with the smallest brush to
clean tight spots and corners first.
Use a towel to wipe dirt as soon as
possible, otherwise it will dry and
re-adhere to the surface.
To Descale the Steam Cleaner
1. Unplug the steam cleaner from the
power source before you descale the
boiler. Allow the unit to cool.
2. Fill the boiler with 1 part vinegar and
5 parts water and leave overnight or
for a period of approximately 8 hours.
Do not screw the safety cap onto the
steam cleaner while you are
descaling the boiler. Do not use the
steam cleaner while descaling
solution is inside the boiler.
3. After the period of soaking, turn the
steam cleaner upside down to empty
solution from the boiler. Due to the
fact that a small amount of solution
will be left in the boiler, it is necessary
to rinse the boiler out with clean water
2 or 3 times. Your steam cleaner is
now ready for use.
9
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Components
Attaching the Shoulder Strap
On/Off Power Switch: The On/Off
switch has a light that will illuminate
when the unit is plugged into the 120V
wall outlet and the switch turned to the
“On” position.
Steam Ready Light: The steam ready
light located on the handle will turn “On”
when the steam is ready.
Caution: Read the instructions for
“Filling the Water Tank” before opening
the Safety Cap.
Caution: Always unplug before filling.
ALLOW UNIT TO COOL FOR
FIFTEEN (15) MINUTES BEFORE
REFILLING.
Using the detachable shoulder strap
allows for greater freedom of movement
when both hands are needed for
various cleaning tasks. To attach the
shoulder strap to the steam cleaner,
simply snap the shoulder strap hooks
onto the connecting rings on the unit
body. (Fig. 9, 10 & 11)
Fig. 1
Warning: Extreme care should be
taken when refilling the unit. Allow
unit to cool for 15 minutes and vent
any residual steam pressure (see
Step #2) from the boiler before
refilling. When refilling the steam
cleaner while the boiler is still hot,
there is a risk that water will squirt
back during filling and cause
scalding. Use caution when opening
the Safety Cap as cap may become
hot during use and escaping steam
can cause scalding.
Connecting
points
Connecting
points
Important: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the boiler in this
appliance. Use tap water or distilled
water if the tap water in your area is
very hard.
Fig. 11
Fig. 9
Filling or Refilling Your Steam
Cleaner With Water
Important: Always insure that the unit
is “UNPLUGGED” from the wall
receptacle prior to initial filling or re-filling
the water tank and has been allowed to
cool for 15 minutes. Never attempt to fill
this unit under a water tap, always use
the filling funnel provided.
1. Remove the plug from the electrical
outlet and allow the steam cleaner to
cool for fifteen (15) minutes.
2. Press the steam trigger on the hand grip
to vent any residual steam pressure that
is in the boiler.
3. Place the unit on a flat, stable surface.
Push down firmly on the safety cap
and slowly turn the safety cap counter
clockwise until it is removed.
4. Place the funnel in the tank opening.
(Fig. 1) Fill with a maximum of one
filling flask or 2 cups (500 ml) of water.
Do Not Overfill. Turn the safety cap
clockwise to replace.
Note: To remove or replace the safety cap,
push down on it firmly and rotate it
clockwise to tighten or counter clock-wise to
loosen. If not depressed the cap will rotate
freely without advancing.
Important: When using the steam
cleaner with the shoulder strap,
avoid rocking or tilting the unit
excessively as this may cause water
to enter the hose and be discharged
along with the steam.
5. Connect desired attachments onto
the flexible steam hose.
6. Plug the unit into a standard (120
volt, grounded) wall receptacle and
switch the On/Off switch to the “On”
position. Allow approximately 4-6
minutes for vapor to reach its
working temperature and pressure.
When the unit is ready for use, the
steam ready light will turn “On”.
Always point nozzle outlet in a safe
direction. At the start, some water
will come out from the nozzle.
This is normal.
Note: When the steam cleaner has run
out of water, steam output will cease.
7. When finished using the unit, turn it
“Off” and unplug it from the electrical
outlet.
Fig. 10
Warning: This appliance is under
pressure. After every use, press
steam trigger button until all
pressure has been released before
removing safety cap. Allow unit to cool
for fifteen (15) minutes before refilling.
Note: Filling the unit with hot water will
shorten the heat up time.
8
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Caution: Be aware of hand placement
Care & Maintenance of the Steam
Pocket Towel
Due to the unique cleaning ability of this
cloth, proper care of your micro-fiber towel
is required to ensure long life and
continued cleaning ability.
• The first thing you should do when
you get a new micro-fiber towel is to
wash and dry it. During the
manufacturing process the fabric has a
tendency to become flat as it picks up
contaminants from the air and
machinery. There will also be a number
of loose threads that, while they cause
no harm, can be annoying the first time
you use the towel.
• To clean the towel, simply wash it in your
washing machine using the warm water
setting.
• Always wash your towels separately
from other fabrics. They have a tendency
to pick up lint and other particles from
other fabrics and the next time you use
your towel, this lint will transfer to the
surface being cleaned.
• ONLY USE LIQUID DETERGENTS,
never use dry detergents as many times
the granules do not fully dissolve and
become trapped in the towel. This can
scratch the surface that you are
cleaning.
• NEVER USE BLEACH OR FABRIC
SOFTENERS! Bleach will damage the
micro-fiber fabric and fabric softeners
deposit a coating on the micro-fiber
fabric what will not allow the cloth to
clean efficiently.
• Air dry the towel. Do not put in a clothes
dryer as high heat will cause the towel to
shrink and the micro-fibers to break
down.
• If you wash your towel on a regular basis
and don’t let them get too dirty, they will
last much longer. As with any fabric, dirt
particles, grease and other contaminants
can cause the fibers to break down,
therefore regular cleaning will help
preserve your micro-fiber towels.
• As you use the micro-fiber towel, you will
notice that sometimes a thread will
loosen or pull out. This is normal and
you should NEVER PULL AT THE
LOOSE THREAD! Pulling the thread can
cause the weave to come undone.
Instead, simply trim the thread with a
pair of sharp scissors.
Using the Trigger Lock
Note: Fit the steam pocket frame with the
angle adapter onto the extension tube.
Step 2. If the angle adapter is not
attached to the steam pocket
frame, attach as follows: Hold
the steam pocket frame in one
hand and the
and take care not to actuate the steam
discharge switch while installing or
removing accessories.
The steam cleaner has a steam trigger
lock that automatically engages when
you depress the steam trigger. (Fig. 2)
To unlock the steam trigger, just press it
in the direction of the hose.
Attaching the Accessories to the
Flexible Steam Hose
Allow the unit to cool for 5 minutes
before changing accessories.
Steam
Trigger Lock
angle adapter in
the other. Insert
the angle adapter
into the opening
Window Squeegee
This attachment is very useful for
cleaning large windows, plastic
material, ceramic, tiled or marble
surfaces.
Fig. 2
of the steam
pocket frame as
Fig. 5
Using Your Steam Cleaner with
Steam Pocket
shown in Fig. 5. Note that the
flat side on the nozzle must face
toward the side of the frame with
the brass pin. Once inserted,
rotate it 90°.
Important: When cleaning windows,
always avoid any sudden changes in
temperature to prevent glass
breakage or cracks.
Step 1. Connect the steam pocket
accessory to the steam handle
with two extension tubes. To
attach the extension tubes one
onto the other or onto the hand
grip, press the locking button
ensuring that it fits into the hole
(Fig. 3., Fig. 4) and press the two
sections together. To disconnect,
repeat the operation by pressing
the locking button and pulling the
two sections apart.
Step 3. Insert the electrical power cord
into the outlet. Heating time is
approximately 4-6 minutes with
cold water. Filling the steam
generator with hot water will
shorten the heat up time.
To use: Connect the window
squeegee to the hand
grip or use with
extension tube for
hard to reach surfaces.
Apply steam abundantly, then remove
excess water and dirt with the glass
wiping edge.
Extended Concentrator
Use the extended concentrator
to clean under toilet rims
and hard to reach places.
To use: Attach the extended
concentrator to the handgrip or to
the extension tubes.
Attaching the Steam Pocket
Towel to the Frame
Warning: Always insure the unit is
“UNPLUGGED” from the wall receptacle
prior to attaching or removing accessories.
Locking Button
1. Slide the steam
pocket towel over
the steam pocket
frame. (Fig. 6)
Hand Grip Fig. 3
2. Bring the towel all
Nylon Bristle Brush (x2)
It is best for cleaning grout in-between
the tiles, ceramic and marble.
To use: Screw on the nylon
bristle brush on to the end
of the extended
Fig. 6
the way to the top
of the steam
pocket frame.
(Fig. 7)
3. Bring the hook and
latch strips that are
on the back side of
concentrator, which
Fig. 4
then may be used directly
on the hand grip or with extension
tubes.
Fig. 7
the steam pocket
towel over the
steam pocket frame
and attach to
the inside of the
front side of the
steam pocket towel.
Fig. 8
(Fig. 8)
Note: If replacing the steam pocket
towel, make sure that the steam pocket
frame has been allowed to cool before
removing or attaching a new steam
pocket towel.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|