UNDERCOUNTER
DISHWASHER
Use & Care Guide
For questions about features, operation/performance,
parts, accessories or service, call: 1-800-253-1301.
or visit our website at...
Table of Contents................................................. 2
Model TUD8750S
W10073800
Download from Www.Somanuals.com. All Manuals Search And Download.
DISHWASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
DANGER
You can be killed or seriously injured if you don't
instructions.
follow
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
ꢀ
ꢀ
ꢀ
Read all instructions before using the dishwasher.
Use the dishwasher only for its intended function.
ꢀ
ꢀ
Do not tamper with controls.
Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
Use only detergents or rinse agents recommended for use
in a dishwasher, and keep them out of the reach of children.
ꢀ
ꢀ
To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
ꢀ
When loading items to be washed:
Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
ꢀ
Do not wash plastic items unless they are marked
“dishwasher safe” or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
ꢀ
ꢀ
Do not touch the heating element during or immediately
after use.
ꢀ
Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
Do not operate the dishwasher unless all enclosure panels
are properly in place.
SAVE THESE INSTRUCTIONS
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using Your Dishwasher
GROUNDING INSTRUCTIONS
WARNING
ꢀ
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current. The dishwasher is
equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and
grounded in accordance with all local codes and
ordinances.
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
WARNING: Improper connection of the
equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or
service representative if you are in doubt whether the
dishwasher is properly grounded. Do not modify the
plug provided with the dishwasher; if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
WARNING
ꢀ
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded
metal, permanent wiring system, or an equipment-
grounding conductor must be run with the circuit
conductors and connected to the equipment-
grounding terminal or lead on the dishwasher.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
SAVE THESE INSTRUCTIONS
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
I
Install where dishwasher is protected from the elements.
Protect against freezing to avoid possible rupture of fill valve.
Such ruptures are not covered by the warranty. See “Storing”
section for winter storage information.
I
I
Install and level dishwasher on a floor that will hold the
weight, and in an area suitable for its size and use.
Remove all shipping plugs from hoses and connectors (such
as the cap on the drain outlet) before installing. See
Installation Instructions for complete information.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS AND FEATURES
A
B
K
L
C
D
E
F
G
M
N
H
I
O
J
A. Upper level wash
B. Top rack
C. Lower spray arm
D. Bottom rack
F. Heating element
G. Water inlet opening (in tub wall)
H. Silverware basket
I. Detergent dispenser
J. Vent
K. Cup shelves
L. Top spray arm
M. Filter module
N. Overfill protection float
O. Rinse aid dispenser
E. Model and serial number label
Control Panel
5
Download from Www.Somanuals.com. All Manuals Search And Download.
START-UP GUIDE
Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety
information and useful operating tips.
5. Select the desired cycle and options. (See “Dishwasher
Use.”)
Using Your New Dishwasher
1. Scrape large food soil and hard items (toothpicks or bones)
from dishes.
2. Properly load the dishwasher. (See “Dishwasher Loading.”)
Make sure nothing keeps the spray arm(s) from spinning
freely.
6. Press START/RESUME.
NOTE: If the door is opened during a cycle or the power is
interrupted, the Start/Resume indicator flashes. The cycle will not
resume until the door is closed, and Start/Resume is pressed.
Stopping Your Dishwasher
3. Add detergent and check the rinse aid dispenser. Add rinse
You can stop your dishwasher anytime during a cycle.
aid if needed. (See “Dishwasher Use.”)
1. Open the door slightly.
2. Wait for the spraying action to stop. Then open the door all
the way, if needed.
Close the door and press START/RESUME to continue the cycle.
OR
Press CANCEL/DRAIN. A 2-minute drain starts.
4. Push door firmly closed. The door latches automatically. Run
hot water at the sink nearest your dishwasher until the water
is hot. (See “Dishwasher Efficiency Tips.”) Turn off water.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DISHWASHER LOADING
I
I
I
I
I
I
Place items so open ends face down for cleaning and
draining.
Loading Suggestions
Load glasses in top rack only. The bottom rack is not
designed for glasses. Damage can occur.
I
Remove leftover food, bones, toothpicks and other hard
items from the dishes. It is not necessary to rinse the dishes
before putting them into the dishwasher. The wash module
removes food particles from the water. The module contains a
chopping device which will reduce the size of food items.
Place cups and glasses in the rows between tines. Placing
them over the tines can lead to breakage and water spots.
China, crystal, and other delicate items must not touch each
other during dishwasher operation. Damage may occur.
NOTE: If hard items such as fruit seeds, nuts, and eggshells
enter the wash module, you might hear chopping, grinding,
crunching, or buzzing sounds. These sounds are normal
when hard items enter the module. To avoid damage to the
dishwasher, do not let metallic items (such as pot handle
screws) get into the wash module.
Load lightweight plastic items in the top rack only. Only
plastic items marked “dishwasher safe” are recommended.
Load plastic items so the force of the spray does not move
them during the cycle.
I
I
It is important for the water spray to reach all soiled surfaces.
I
I
To avoid chipping, do not let stemware touch other items.
Load dishes so they are not stacked or overlapping, if
possible. For best drying, water must be able to drain from all
surfaces.
Small bowls, pans, and other utensils can be placed in the
top rack. Load bowls in the center section for best stability.
I
I
Make sure pot lids and handles, pizza pans, cookie sheets,
etc., do not interfere with the spray arm rotation.
Cup shelves
Fold down the extra shelf on the left-hand or right-hand side of
the top rack to hold additional cups, stemware or long items such
as utensils and spatulas.
Run a rinse cycle to keep dishes moist if you do not plan to
wash them soon. Foods such as eggs, rice, pasta, spinach,
and cooked cereals may be hard to remove if they are left to
dry over a period of time.
NOTE: The features on your dishwasher may vary from those
shown below.
Quiet operating tips
To avoid thumping/clattering noises during operation:
I
Make sure lightweight load items are secured in the racks.
I
Make sure pot lids and handles, pizza pans, cookie sheets,
etc., do not touch interior walls or interfere with the rotation of
the spray arm.
I
Load dishes so they do not touch one another.
NOTE: For built-in models, keep sink drain plugs closed during
dishwasher operation to avoid noise transfer through drains.
Loading Top Rack
The top rack is designed for cups, glasses, and smaller items.
Many items, up to 9" (22 cm), fit in the top rack. (See
recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
10 place setting
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I
I
Secure heavily soiled cookware face down in the rack.
Loading Bottom Rack
Make sure pot handles and other items do not stop rotation
of the spray arm(s). The spray arm(s) must move freely.
The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 13" (33 cm) tall, fit in the bottom rack.
(See recommended loading patterns shown.)
I
Do not load items between the bottom rack and the side of
the dishwasher tub because they might block the water inlet
opening.
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
Loading Silverware Basket
Load the silverware basket while it is in the dishwasher or take
the basket out for loading on a counter or table top.
NOTE: Unload or remove the basket before unloading the racks
to avoid spilling water droplets onto the silverware.
10 place setting
I
Do not load glasses, cups, or plastic items in the bottom
rack. Load small items in the bottom rack only if they are
secured in place.
Mix items in each section of the basket with some pointing up
and some down to avoid nesting. Spray cannot reach nested
items.
I
I
I
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety
of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.
IMPORTANT: Always load items (knives, skewers, etc.) pointing
down.
NOTES:
I
Do not load silver or silver-plated silverware with stainless
steel. These metals can be damaged by contact with each
other during washing.
I
Some foods (such as salt, vinegar, milk products, fruit juices,
etc.) can pit or corrode silverware. Run a rinse cycle if you do
not have a full load to wash immediately.
Utensil load
I
Load cookie sheets, cake pans, and other large items at the
sides and back. Loading such items in front can keep the
water spray from reaching the detergent dispenser.
Mixed load
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DISHWASHER USE
Detergent Dispenser
The detergent dispenser has two sections. The smaller Pre-Wash
Filling the dispenser
section empties detergent into the dishwasher when you close
the door. The larger Main Wash section automatically empties
detergent into the dishwasher during the wash. (See the “Cycle
Selection Charts.”)
1. If the dispenser cover is closed, open the cover by moving
the cover latch to the right.
A
Hard Water
Hard Water
Soft Water
Soft Water
Hard Water
Hard Water
B
Soft Water
Soft Water
C
PRE-
MAIN WASH
WASH
PRE-
MAIN WASH
WASH
A. Cover latch
B. Main Wash section
C. Pre-Wash section
2. Add the correct amount of detergent to the Main Wash
section of the dispenser according to the chart below. If you
are using a tablet detergent, it must be placed in the Main
Wash section. (See “How much detergent to use.”)
I
Use automatic dishwashing detergent only. Other detergents
can produce excessive suds that can overflow out of the
dishwasher and reduce washing performance.
3. Add the correct amount of detergent to the Pre-Wash section
of the dispenser, if needed, according to the chart below.
I
I
Add detergent just before starting cycle.
4. Close the dispenser cover.
Store tightly closed detergent in a cool, dry place. Fresh
automatic dishwasher detergent results in better cleaning.
It is normal for the cover to open partially when dispensing
detergent.
NOTE: Do not use detergent with a rinse cycle.
NOTE: See the “Cycle Selection Charts” for which section to fill
depending on the cycle selected.
How much detergent to use
I
The amount of detergent to use depends on the soil level of your dishes, hardness of your water, and the type of detergent. If you
use too little, dishes will not be clean. If you use too much in soft water, glassware will etch.
I
Water hardness can change over a period of time. Find out your water’s hardness by asking your local water department, water
softener company, or county extension agent.
Detergent Dispenser fill recommendations per dish load soil level and water hardness
Light Soil or Prerinsed
Normal Soil
Heavy Soil
Water Hardness
Main Wash
Pre-Wash
section
Main Wash
Pre-Wash
section
Main Wash
Pre-Wash
section
section
section
section
Soft
(0-2 grains per
U.S. gallon)
4 tsp (20 mL)
Fill to Soft Water
line
Empty
6 tsp (30 mL)
Fill above the
Soft Water line
2 tsp (10 mL)
Fill to Soft Water
line
9 tsp (45 mL)
Fill cup
completely
7 tsp (35 mL)
Fill cup
completely
Medium
(2-6 grains per
U.S. gallon)
6 tsp (30 mL)
Fill above the
Soft Water line
2 tsp (10 mL)
Fill to Soft Water
line
6 tsp (30 mL)
Fill above the
Soft Water line
4 tsp (20 mL)
Fill to Hard Water
line
9 tsp (45 mL)
Fill cup
completely
7 tsp (35 mL)
Fill cup
completely
Hard
(7 grains per U.S.
gallon and above)
8 tsp (40 mL)
Fill to Hard Water
line
4 tsp (20 mL)
Fill to Hard Water
line
9 tsp (45 mL)
Fill cup
completely
7 tsp (35 mL)
Fill cup
completely
9 tsp (45 mL)
Fill cup
completely
7 tsp (35 mL)
Fill cup
completely
NOTE: Fill amounts shown are for standard powdered detergent. Amounts may vary if you use liquid or concentrated powdered
detergent. Tablet detergents should be placed in the main wash section of the detergent dispenser with the cover closed. Follow
instructions on the package when using liquid dishwasher detergent, concentrated powdered detergent or tablet detergent.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid setting
Rinse Aid Dispenser
IMPORTANT: Your dishwasher is designed to use a liquid rinse
aid. The use of rinse aids greatly improves drying by allowing
water to drain from the dishes after the final rinse. They also keep
water from forming droplets that can dry as spots or streaks. Do
not use a solid or bar-type rinse aid.
The amount of rinse aid released into the final rinse can be
adjusted. For most water conditions, the factory setting of 2 will
give good results. If you have hard water or notice rings or
calcium spots on your glasses or dishes, try a higher setting.
Lock
Filling the dispenser
The rinse aid dispenser holds 5 oz (150 mL) of rinse aid. Under
normal conditions, this will last for about 1 to 3 months.
1. Make sure the dishwasher door is fully open.
2. Turn the dispenser knob to “Open” and lift it out.
Open
USE RINSE AID FOR
Full
B
BETTER DRYING
Lock
C
To adjust the setting
Add
1. Remove the dispenser knob.
Open
2. Turn the arrow adjuster inside the dispenser to the desired
setting by either using your fingers or inserting a flat-blade
screwdriver into the center of the arrow and turning.
A
3. Replace the dispenser knob.
A. Dispenser knob
B. Indicator
C. Indicator window
Dishwasher Efficiency Tips
Hot water dissolves and activates the dishwashing detergent.
Hot water also dissolves grease on dishes and helps glasses dry
spot-free. For best dishwashing results, water should be 120°F
(49°C) as it enters the dishwasher. Loads may not wash as well if
the water temperature is too low. Water that is too hot can make
some soils harder to remove and cause certain detergent
ingredients not to function. If your water heater is located far from
the dishwasher, it may be necessary to run the hot water at the
faucet closest to the dishwasher to minimize the amount of cold
water in the water line.
3. Pour rinse aid into the opening until the indicator points to
“Full.” Take care not to overfill. (When the rinse aid indicator
drops to the “Add” level, add more rinse aid.)
Full
Add
To check water temperature
4. Clean up any spilled rinse aid with a damp cloth.
5. Place the knob back into the opening and turn to the “Lock”
1. Run hot water at the faucet closest to your dishwasher for at
position.
least 1 minute.
2. Place a candy or meat thermometer in a glass measuring
cup.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Check the temperature on the thermometer as the water is
Pots & Pans
running into the cup.
Use this cycle for hard-to-clean, heavily soiled pots, pans,
casseroles, and regular tableware. During the wash, the wash
action will repeatedly pause for several seconds.
Additional efficiency tips
Initial display time after rotating clock pattern: 92-99 min.
I
I
To save water and energy and time, do not rinse dishes
before putting them into the dishwasher.
Use both detergent dispenser sections.
Use a low energy, quick, or short cycle whenever possible.
These cycles use less hot water and energy than a normal
cycle.
Pre-
Wash
Main
Wash
Rinse
Rinse
Final
Heated
Rinse
Dry
Mini-
mum
Time
(min)
Water
Usage
(gal/L)
I
Use a delay feature (on some models) to run your dishwasher
during off-peak hours. Local utilities recommend avoiding
heavy usage of energy at certain times of day.
G
G
140°F
(60°C)
G
G
140°F
(60°C)
G
99*
6.9-7.8/
Light 26.1-29.6
soil
I
I
During the summer, run your dishwasher at night. This
reduces daytime heat buildup in the kitchen.
Use the energy-saving dry option whenever possible. Allow
longer drying times (overnight) when using these options. Use
a rinse aid to improve drying.
Normal
Use this cycle for loads with normal amounts of food soil. (The
energy-usage label is based on this cycle.) During the wash, the
wash action will repeatedly pause for several seconds.
Initial display time after rotating clock pattern: 64-84 min.
I
I
I
Use cycles or options that add extra heat to the wash or rinse
portion of the cycle only when needed.
Run your dishwasher with full loads. Run a rinse cycle after
meals until the dishwasher is full.
Use both detergent dispenser sections.
If your home is equipped with a water softener, you may want
to avoid starting the dishwasher during the regeneration of
the softener, since this may contribute to poor wash
performance.
Pre-
Wash
Main
Wash
Purge
Rinse
Final
Heated
Rinse
Dry
Mini-
mum
Time
(min)
Water
Usage
(gal/L)
G
G
120°F
(49°C)
G
G
140°F
(60°C)
G
71*
5.6-6.8/
Light 21.2-25.7
soil
Cycle Selection Charts
Select the wash cycle and options desired and press START/
RESUME. The dishwasher starts filling once you press START/
RESUME, unless you select a delay wash. You can change
cycles and options as the machine is filling.
Rinse Only
After completing a wash cycle, the dishwasher remembers the
cycle and options. It uses the same cycle and options again in
the next wash cycle, if you press only START/RESUME.
Use this rinse cycle for rinsing dishes, glasses, and silverware
that will not be washed right away.
Initial display time after rotating clock pattern: 3 min.
NOTE: If the door is opened during a cycle or the power is
interrupted, the Start/Resume indicator flashes. The cycle will not
resume until the door is closed and Start/Resume is pressed.
Do not use detergent with this cycle.
Pre-
Wash
Main
Wash
Rinse
Rinse
Final
Heated
Rinse
Dry
Time
(min)
Water
Usage
(gal/L)
A “G” shows what steps are in each cycle. Your model may have
some or all of the cycles shown.
Display time is for models with the dual digit display on the
console.
G
10
1.8-/6.8
These models meet the ENERGY STAR® guidelines for energy
efficiency.
*If the incoming water is less than the recommended temperature
or food soils are heavy, the cycle will automatically compensate
by adding time, heat, and water as needed.
Temperatures indicate where extra heat is added. The cycle
countdown (on some models) pauses at these points until water
reaches the temperature.
Water usage is shown in U.S. gallons/liters.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To add items
Canceling a Cycle
Anytime during a cycle, press CANCEL/DRAIN. Your dishwasher
starts a 2-minute drain, if needed, and clears all indicators. Let
the dishwasher drain completely.
1. Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed,
NOTE: If your dishwasher does not need draining, the
dishwasher stops and clears all indicators.
add the item.
3. Close the door firmly until it latches.
4. Press START/RESUME. The dishwasher resumes the cycle
To stop the drain
after a 5-second pause.
You can press CANCEL/DRAIN again to stop the drain
immediately. Be sure to drain the dishwasher before starting a
new cycle.
Option Selections
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn off the option,
or select a different option if desired.
To clear the indicators
You can change an option anytime before the selected option
begins. For example, you can turn off the drying option anytime
before drying begins.
Press CANCEL/DRAIN before starting the dishwasher to clear all
options and cycles.
After a wash cycle, the dishwasher remembers the options used.
It uses the same options in the next wash cycle, if you press only
START/RESUME.
Changing a Cycle or Setting
During the first fill of a cycle
Hi-Temp Wash
1. Press a new cycle and/or options.
Select this option to increase the target water temperature during
the wash portions of the cycle. Hi-Temp Wash raises the target
water temperature to 145ºF (63ºC) in the main wash. Heating the
water helps improve washing results. Hi-Temp Wash is useful
when loads contain baked-on food.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. Press START/RESUME.
After the first fill of a cycle
This option adds heat, wash time and water to the cycle.
NOTE: Hi-Temp Wash is an option with Pots & Pans and Normal
cycles.
1. Press CANCEL/DRAIN. Your dishwasher starts a 2-minute
drain, if needed, and clears all indicators. Let the dishwasher
drain completely.
Heated Dry
NOTE: If your dishwasher does not need draining, the
dishwasher stops and clears all indicators.
Select this option to dry dishes with heat.
2. Check the detergent dispensers. They must be filled properly
Switching off Heated Dry skips the dry period. This is useful when
loads contain plastic dinnerware that may be sensitive to high
temperatures. The dishes take longer to dry, and some spotting
may occur. Some items (such as plastics) may need towel drying.
for the new cycle.
3. Press a new cycle and/or options.
4. Press START/RESUME. (The door must be closed.)
For best drying, use a liquid rinse aid.
Adding Items During a Cycle
NOTE: Heated Dry is an option with all cycles, except the Rinse
Only cycle. Heated Dry begins automatically with all cycles
unless you switch it off.
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
Lock
Use the lock to avoid unintended use of the dishwasher. You can
also use the lock feature to avoid unintended cycle or option
changes during a cycle.
When the lock is lit, all buttons are disabled.
NOTES:
I
The dishwasher door can be opened while the controls are
locked.
I
You can turn on the lock while the dishwasher is running. If
you open the door, unlock the controls and press START/
RESUME to restart. You can lock controls again, if desired.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn on the lock
Press and hold HEATED DRY for 4 seconds. The lock glows.
Sensor System
If you press any pad while your dishwasher is locked, the light
flashes 3 times and the selection is ignored.
This dishwasher is equipped with an optical sensor wash that
detects water temperature and the amount of soil and detergent.
Wash cycles are adjusted based on what is sensed.
To turn off the lock
The dishwasher “senses” wash water quality during a series of
pauses in the wash cycle. The sensor monitors water
temperature and the amount of soil and detergent appearing in
the wash water. It automatically adjusts the wash cycle for the
best wash. Lightly soiled dishes will use less water and energy.
Heavily soiled dishes will get more water and increased
temperature and wash time. This dishwasher will automatically
adjust the sensor approximately once a year to your water
quality.
Press and hold HEATED DRY for 4 seconds. The light turns off.
Delay start
Select this option to run your dishwasher at a later time or during
off-peak hours. You can add items to the load anytime during the
delay countdown. After adding items, close the door firmly until it
latches. The delay countdown will not continue if the door is not
latched. Press START/RESUME. If the door is unlatched, the
Start/Resume indicator flashes. The delay countdown stops until
you latch the door and press START/RESUME.
IMPORTANT: The very first wash cycle after installation in your
home will be adjusted to include an additional 2 rinses. This cycle
must not be interrupted for proper sensor adjustment. If this
adjustment cycle is canceled or stopped before the Clean light
comes on at the end of the cycle, the next wash cycle will repeat
this sensor adjustment.
To delay the start
1. Press DELAY for a 4-hour delay. The light above the Delay
pad glows.
2. Select a wash cycle and option or skip to Step 3 to use the
cycle and options selected for last cycle.
Drying System
3. Press START/RESUME. (The door must be closed.) The delay
During drying, you can see steam escaping through the vent at
the upper left corner of the door. This is normal as the heat dries
your dishes.
countdown starts, and the cycle will begin after 4 hours.
NOTES:
I
To cancel the delay and cycle, press CANCEL/DRAIN.
I
To cancel the delay and start the cycle, press START/
RESUME.
Cycle Status Indicators
Follow the progress of your dishwasher with the Cycle Status
Indicators. Clean glows when a cycle is finished. The light turns
off when you open the door or press CANCEL/DRAIN.
IMPORTANT: The vapor is hot. Do not touch the vent
during drying.
Overfill Protection Float
The overfill protection float (in the front right corner of the
dishwasher tub) keeps the dishwasher from overfilling. It must be
in place for the dishwasher to operate.
Washing
Washing glows while the dishwasher is washing or rinsing the
dishes.
Drying
Drying glows while the dishwasher is drying your dishes.
Check under the float for objects that may keep the protector
from moving up or down.
Clean
Clean glows when a cycle is finished. The light turns off when you
open the door or press CANCEL/DRAIN.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
WASHING SPECIAL ITEMS
If you have doubts about washing a particular item, check with the manufacturer to see if it is dishwasher safe.
Material
Dishwasher Safe?/Comments
Yes
High water temperature and detergents
can affect finish of anodized aluminum.
Material
Dishwasher Safe?/Comments
No
High water temperatures and detergent
can discolor or pit the finish.
Aluminum
Pewter, Brass,
Bronze
Disposable
Aluminum
No
Disposable
Plastics
No
Do not wash throwaway aluminum pans
in the dishwasher. These might shift
during washing and transfer black marks
to dishes and other items.
Cannot withstand high water
temperatures and detergents.
Plastics
Yes
Always check manufacturer’s
recommendations before washing.
Plastics vary in their capacity to
withstand high temperatures and
detergents. Load plastics in top rack
only.
Bottles and Cans No
Wash bottles and cans by hand. Labels
attached with glue can loosen and clog
the spray arms or pump and reduce
washing performance.
Cast Iron
No
Stainless Steel
Yes
Seasoning will be removed, and iron will
rust.
Run a rinse cycle if not washing
immediately. Prolonged contact with
food containing salt, vinegar, milk
products, or fruit juice can damage
finish.
China/
Stoneware
Yes
Always check manufacturer’s
recommendations before washing.
Antique, hand-painted, or over-the-glaze
patterns may fade. Gold leaf can discolor
or fade.
Sterling Silver or
Silver Plate
Yes
Run a rinse cycle if not washing
immediately. Prolonged contact with
food containing salt, acid, or sulfide
(eggs, mayonnaise, and seafood) can
damage finish.
Crystal
Yes
Always check manufacturer’s
recommendations before washing. Some
types of leaded crystal can etch with
repeated washing.
Tin
No
Can rust.
Gold
No
Wooden Ware
No
Gold-colored flatware will discolor.
Wash by hand. Always check
manufacturer’s instructions before
washing. Untreated wood can warp,
crack, or lose its finish.
Glass
Yes
Milk glass yellows with repeated
dishwasher washing.
Hollow-Handle
Knives
No
Handles of some knives are attached to
the blade with adhesives which can
loosen if washed in the dishwasher.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DISHWASHER CARE
Cleaning
Drain Air Gap
Check the drain air gap anytime your dishwasher isn’t draining
Cleaning the exterior
well.
Some state or local plumbing codes require the addition of a
drain air gap between a built-in dishwasher and the home drain
system. If a drain is clogged, the drain air gap protects your
dishwasher from water backing up into it.
In most cases, regular use of a soft, damp cloth or sponge and a
mild detergent is all that is necessary to keep the outside of your
dishwasher looking nice and clean. If your dishwasher has a
stainless steel exterior, a stainless steel cleaner is recommended.
The drain air gap is usually located on top of the sink or
countertop near the dishwasher. To order a drain air gap, contact
your local dealer; or call us or your designated service center and
ask for Part Number 300096. For more information, see
“Assistance or Service.”
Cleaning the interior
Hard water minerals can cause a white film to build up on the
inside surfaces, especially just beneath the door area.
Do not clean the dishwasher interior until it has cooled. You may
want to wear rubber gloves. Do not use any type of cleanser
other than dishwasher detergent because it may cause foaming
or sudsing.
NOTE: The drain air gap is an external plumbing device that is
not part of your dishwasher. The warranty provided with your
dishwasher does not cover service costs directly associated with
the cleaning or repair of the external drain air gap.
To clean interior
Make a paste with powdered dishwasher detergent on a damp
sponge and clean.
To clean the drain air gap
Clean the drain air gap periodically to ensure proper drainage of
your dishwasher. Follow the cleaning instructions provided by the
manufacturer. With most types, you lift off the chrome cover.
Unscrew the plastic cap. Then check for any soil buildup. Clean if
necessary.
OR
Use liquid automatic dishwasher detergent and clean with a
damp sponge.
OR
See the vinegar rinse procedure in “Spotting and filming on
dishes” in “Troubleshooting.”
Storing
NOTE: Run a normal cycle with detergent after cleaning the
interior.
Storing for the summer
Protect your dishwasher during the summer months by turning
off the water supply and power supply to the dishwasher.
Winterizing your dishwasher
Protect your dishwasher and home against water damage due to
freezing water lines. If your dishwasher is left in a seasonal
dwelling or could be exposed to near freezing temperatures, have
your dishwasher winterized by authorized service personnel.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid the cost of a service call...
I
Detergent remains in the covered section of the
dispenser
Dishwasher is not operating properly
Is the cycle complete?
I
Dishwasher does not run or stops during a cycle
Is the detergent lump-free? Replace detergent if necessary.
White residue on the front of the access panel
Is the Start/Resume indicator flashing? Opening the door or
interrupting the power stopped the cycle. Close the door and
press START/RESUME.
I
Was too much detergent used? Refer to the “Detergent
Dispenser” section.
Does the Start/Resume indicator flash 3 times when you
press START/RESUME? The dishwasher is waiting for you to
open the door after the last cycle. Open and close the door,
then press START/RESUME.
Is the brand of detergent making excess foam? Try a different
brand to reduce foaming and eliminate buildup.
I
Odor in the dishwasher
Is the door closed tightly and latched?
Are dishes washed only every 2 or 3 days? Run a rinse cycle
once or twice a day until you have a full load.
(NOTE: On models with a dual-digit display, the control
displays “- -” during a cycle if it believes the door is not
latched.)
Does the dishwasher have a new plastic smell? Run a vinegar
rinse as described in “Spotting and filming on dishes” later in
this Troubleshooting guide.
Is the right cycle selected? Refer to the “Cycle Selection
Charts.”
I
Condensation on the kitchen counter (built-in models)
Is there power to the dishwasher? Has a household fuse
blown, or has a circuit breaker tripped? Replace the fuse or
reset the circuit breaker. If the problem continues, call an
electrician.
Is the dishwasher aligned with the countertop? Moisture from
the vent in the dishwasher console can form on the counter.
Refer to the Installation Instructions for more information.
Has the motor stopped due to an overload? The motor
automatically resets itself within a few minutes. If it does not
restart, call for service.
Dishes are not completely clean
Food soil left on the dishes
I
Is the water shutoff valve (if installed) turned on?
Is the dishwasher loaded correctly? Refer to the “Dishwasher
Loading” section.
It is normal for certain cycles to repeatedly pause for several
seconds during the main wash.
Is the water temperature too low? For best dishwashing
results, water should be 120°F (49°C) as it enters the
dishwasher. Refer to the “Dishwasher Efficiency
Tips” section.
I
I
I
Clean light is flashing
The dishwasher has malfunctioned. Call for service to check
heater circuit.
Dishwasher will not fill
Did you use the correct amount of fresh detergent? Use
recommended dishwasher detergents only. Refer to the
“Detergent Dispenser” section. Detergent must be fresh to be
effective. Store detergent in a cool, dry area. Heavy soil and/
or hard water generally require extra detergent.
Is the overfill protection float able to move up and down
freely? Press down to release.
Dishwasher seems to run too long
Is the water supplied to the dishwasher hot enough? The
dishwasher runs longer while heating water. Refer to the
“Dishwasher Efficiency Tips” section.
Do you have hard water? You may need to increase the
amount of detergent you are using. Refer to the “Detergent
Dispenser” section. Also, you may need to switch to a
detergent with a phosphorus content of 8.7%.
A delay automatically occurs in some wash and rinse cycles
until the water reaches the proper temperature.
Is detergent caked in dispenser? Use fresh detergent only. Do
not allow detergent to sit for several hours in a wet dispenser.
Clean dispenser when caked detergent is present.
I
Water remains in the dishwasher
Is the cycle complete?
Is the pump or spray arm clogged by labels from bottles and
cans?
Is the home water pressure high enough for proper
dishwasher filling? Home water pressure should be 20 to
120 psi (138 to 828 kPa) for proper dishwasher fill. If you have
questions about your water pressure, call a licensed, qualified
plumber.
Are high suds slowing the wash arm? Do not use soap or
laundry detergents. Use recommended dishwasher
detergents only.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
I
I
Black or gray marks on dishes
Spots and stains on dishes
Spotting and filming on dishes
Are aluminum items rubbing dishes during washing?
Disposable aluminum items can break down in the
dishwasher and cause marking. Hand wash these items.
Remove aluminum markings by using a mild abrasive cleaner.
I
Is your water hard or is there a high mineral content in your
water? Conditioning the final rinse water with a liquid rinse
aid helps eliminate spotting and filming. Keep the rinse aid
dispenser filled.
Orange stains on plastic dishes or dishwasher interior
Are large amounts of tomato-based foods on dishes placed
in the dishwasher? Stains gradually fade over time. Regular
use of heated drying will slow fading. Stains will not affect
dishwasher performance. Regular use of a rinse cycle and an
air-dry or energy-saving dry option will reduce the likelihood
of staining.
Is the water temperature too low? For best dishwashing
results, water should be 120°F (49°C) as it enters the
dishwasher. Refer to the “Dishwasher Efficiency
Tips” section.
Did you use the correct amount of effective detergent? Use
recommended dishwasher detergents only. Refer to the
“Detergent Dispenser” section. Detergent must be fresh to be
effective. Store detergent in a cool, dry area. Heavy soil and/
or hard water generally require extra detergent.
Dishes do not dry completely
Dishes are not dry
I
Did you load your dishwasher to allow proper water
drainage? Do not overload. Refer to the “Dishwasher
Loading” section. Use a liquid rinse aid to speed drying.
Is the home water pressure high enough for proper
dishwasher filling? Home water pressure should be 20 to
120 psi (138 to 828 kPa) for proper dishwasher fill. If you have
questions about your water pressure, call a licensed, qualified
plumber.
Are the plastics wet? Plastics often need towel drying.
Is the rinse aid dispenser empty? Refer to the “Rinse Aid
Dispenser” section.
NOTE: To remove spots and film from dishes, try a white
vinegar rinse. This procedure is intended for occasional use
only. Vinegar is an acid, and using it too often could damage
your dishwasher.
Did you use an air-dry or energy-saving dry option? Use a
heated drying option for dryer dishes.
1. Wash and rinse dishes. Use an air-dry or an energy saving
Dishes are damaged during a cycle
Chipping of dishes
dry option. Remove all silverware or metal items.
2. Put 2 cups (500 mL) white vinegar in a glass or
I
dishwasher-safe measuring cup on the bottom rack.
Did you load the dishwasher properly? Load the dishes and
glasses so they are stable and do not strike together from
washing action. Minimize chipping by moving the rack in and
out slowly.
3. Run the dishwasher through a complete washing cycle
using an air-dry or an energy saving dry option. Do not
use detergent. Vinegar will mix with the wash water.
Silica film or etching (silica film is a milky, rainbow-
colored deposit; etching is a cloudy film)
I
NOTE: Antiques, feather-edged crystal, and similar types of
china and glassware might be too delicate for automatic
dishwashing. Wash by hand.
Sometimes there is a water/chemical reaction with certain
types of glassware. This is usually caused by some
combination of soft or softened water, alkaline washing
solutions, insufficient rinsing, overloading the dishwasher,
and the heat of drying. It might not be possible to avoid the
problem, except by hand washing.
Noises
I
Grinding, grating, crunching or buzzing sounds
To slow this process use a minimum amount of detergent but
not less than 1 tb (15 g) per load. Use a liquid rinse aid and
underload the dishwasher to allow thorough rinsing. Silica
film and etching are permanent and cannot be removed. Do
not use heated drying.
A hard object has entered the wash module (on some
models). When the object is ground up, the sound should
stop. If the noise persists after a complete cycle, call for
service.
I
I
White spots on cookware with nonstick finish
Has the dishwasher detergent removed cookware
seasoning? Reseason cookware after washing in the
dishwasher.
Brown stains on dishes and dishwasher interior
Does your water have high iron content? Rewash dishes
using 1-3 tsp (5-15 mL) of citric acid crystals added to the
covered section of the detergent dispenser. Do not use
detergent. Follow with a Normal wash cycle with detergent. If
treatment is needed more often than every other month, the
installation of an iron removal unit is recommended.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
I
I
Accessory and repair parts sales.
Specialized customer assistance (Spanish speaking,
hearing impaired, limited vision, etc.).
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
I
Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool designated service technicians
are trained to fulfill the product warranty and provide after-
warranty service, anywhere in the United States.
If you need replacement parts
To locate the Whirlpool designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
If you need to order replacement parts, we recommend that you
use only FSP® replacement parts. These parts will fit right and
work right because they are made with the same precision used
to build every new ESTATE® appliance.
To locate FSP® replacement parts in your area, call us or your
nearest designated service center.
For further assistance
If you need further assistance, you can write to us with any
questions or concerns at:
Call the Estate Customer eXperience Center
toll free: 1-800-253-1301.
Our consultants provide assistance with:
Estate Brand Home Appliances
Customer eXperience Center
553 Benson Road
I
I
I
Features and specifications on our full line of appliances.
Installation information.
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
Use and maintenance procedures.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
19
Download from Www.Somanuals.com. All Manuals Search And Download.
WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTY
ONE YEAR LIMITED WARRANTY
For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or
furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Parts
and repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company.
This limited warranty applies only when the major appliance is used in the country in which it was purchased.
ITEMS WHIRLPOOL WILL NOT PAY FOR
1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair
house fuses or to correct house wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty
coverage.
3. Repairs when your major appliance is used for other than normal, single-family household use.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in
accordance with electrical or plumbing codes, or use of products not approved by Whirlpool.
5. Any food loss due to refrigerator or freezer product failures.
6. Replacement parts or repair labor costs for units operated outside the United States or Canada.
7. Pickup and delivery. This major appliance is designed to be repaired in the home.
8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
9. Expenses for travel and transportation for product service in remote locations.
10. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with
published installation instructions.
11. Replacement parts or repair labor costs when the major appliance is used in a country other than the country in which it was
purchased.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE
TO PROVINCE.
Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Whirlpool dealer to determine if
another warranty applies.
If you need service, first see the “Troubleshooting” section of the Use & Care Guide. After checking “Troubleshooting,” additional help
can be found by checking the “Assistance or Service” section or by calling Whirlpool. In the U.S.A., call 1-800-253-1301. In Canada,
call 1-800-807-6777.
12/05
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Dealer name____________________________________________________
Address________________________________________________________
Phone number__________________________________________________
Model number __________________________________________________
Serial number __________________________________________________
Purchase date __________________________________________________
Write down the following information about your major appliance
to better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label located on the product.
W10073800
© 2006 Whirlpool Corporation.
8/06
Printed in U.S.A.
All rights reserved.
® Registered Trademark/TM Trademark of Whirlpool, U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|