PX1152M
15” Two-Way Dual
Manifolded HF
90° x 45° Full Range
Loudspeaker System
Key Features:
•
Dual ND2 2”Voice Coil, 1”Exit Neodymium
Compression Drivers
•
DVX3151 15” LFTransducer with Forced Air
Cooling
•
•
Very High Sensitivity, 134 dB Maximum SPL
Ultra-Compact, Low Profile, Multipurpose
Design
•
•
90° x 45° Coverage Pattern
600W Continuous (2400W Peak) Power
Handling
•
•
•
Passive/BiampSelectable
Integral Rigging Point for VSA-1 Strong Arm
Pole Mount forTripod Use
General Description:
Technical Specifications:
The Electro-Voice® PX1152M is a versatile fullrange, 2-
way floor monitor loudspeaker system that is part of the
Electro-Voice® Phoenix Series and is intended for high
output sound reinforcement in a large range of portable
sound applications. The PX1152M is capable of being
configured as either passive or biamp, and can be used
fullrange for stage monitor applications or used with a
subwoofer as a very compact system with extended low
frequency capability.
Freq. Response1 (-3 dB): 70 Hz - 15 kHz
Freq. Range1 (-10 dB): 50 Hz - 19 kHz
Rec. Hipass Frequency: 45 Hz
Axial Sensitivity1: 100 dB (1W/1m)
Max Calculated SPL1: 134 dB
Horizontal Coverage: 90°
Vertical Coverage: 45°
Power Handling (Passive): 600W Continuous, 2400W Peak
LF Power Handling (Biamp): 500W Continuous, 2000W Peak
HF Power Handling (Biamp): 80W Continuous, 320W Peak
LF Transducer: (1) DVX3151, 15 in. (381mm) Driver
The PX1152M uses the DVX3151 woofer, a high
efficiency 15-inch woofer with forced air cooling. Dual
ND2-16 compression drivers are precisely summed in a
manifold for increased power handling, maximum SPL,
and low distortion. The very low distortion 90° x 45° horn
provides optimal coverage in the PX1152M’s
configurations. The enclosure is constructed of 18-mm,
13-ply plywood, using tongue and groove joints and
EVCoatTM for long term durability.
HF Transducers: (2) ND2-16, 2 in. (50mm) Diaphragm
Compression Drivers
Crossover Frequency: 1400 Hz
Impedance (Passive): 8 Ohms Nominal
LF Impedance (Biamp): 8 Ohms Nominal
HF Impedance (Biamp): 8 Ohms Nominal
Connectors: (3) Neutrik Speakon NL4's
Enclosure Material: 18mm Plywood with Black EVCoatTM
As a stage monitor, the PX1152M provides symetrical left
and right 60° monitor angles, and NL4 connectors on
each side of the enclosure for connecting multiple
monitors. An integrated rigging point allows for
installation on a truss using the VSA-1 strong arm
accessory.
Suspension: Rigging Point for VSA-1 Strong Arm
Accessory
Grille: Polyester Powder Coated, 16GA
Galvanized Steel, with Rotatable Logo
Dim (H x W x D): 610mm x 442mm x 329mm
(24.00" x 17.42" x 12.97")
Net Weight: 25.1 kg (55.3 lbs)
Shipping Weight: 28.2 kg (62.1 lbs)
1 Half Space measurement.
Download from Www.Somanuals.com. All Manuals Search And Download.
|