| 	
		 EVI-15   
					Full-Range Loudspeaker   
					• Ground-breaking advance in single-   
					box utility   
					• New small-format Vari Intense®   
					6 
					horn   
					• 1-inch exit titanium compression   
					driver   
					• 15-inch cast-frame woofer   
					• 1,000-watt peak, 250-watt long-term   
					power capacity   
					• Terminal strip inputs for secure lead   
					connections   
					• Compact, lightweight, refinishable,   
					easy-to-install enclosure   
					• Available in white or black finish   
					• Three-point hanging system with   
					optional U-bracket   
					made by large screw terminals able to accept   
					up to 12-gauge wire, mounted to an input   
					panel on the back of the enclosure. The   
					system is provided with a 2,000-Hz pas-   
					sive crossover featuring self-setting   
					tweeter protection and asymetric acous-   
					tic slopes with passive lobe steering for   
					uniform coverage throughout the cross-   
					over region. The enclosure is constructed   
					from 19-mm (0.75-in.) thick, thoroughly   
					braced 7-ply birch plywood lined with sound-   
					absorbent glass wool. Five 3/8-16 shoulder-   
					bolt hanging points are provided for safe sus-   
					pension of the EVI-15. There are two hang-   
					ing options recommended. The optional U-   
					Bracket hanging kit, MB-EVI15 is available   
					for use with the 3/8-16 T-nut locations on the   
					side of the enclosure along with a single pull-   
					up strap located on the lower back of the en-   
					closure. The second option is available us-   
					ing the two T-nut locations on the front top   
					of the enclosure as well as the pull-up loca-   
					tion on the lower back of the enclosure. The   
					EBK-1 kit of three forged shoulder eyebolts   
					is available if structurally rated 3/8-16   
					eyebolts are not locally available. The sys-   
					tem may then be hung individually or in an   
					array. Please read the included Applica-   
					tions Guide for more information on   
					mounting methods and installation tac-   
					tics. The system may be ordered in a tex-   
					tured black or white paint which can be   
					painted to complement any interior. The grille   
					is constructed from a sturdy 16-gauge me-   
					dium-gloss black or white powder-coated steel   
					and may be painted or covered with cloth to   
					match the enclosure.   
					The EVI-15 full-range Vari Intense® loud-   
					speaker is the ideal system whenever high-   
					output full-frequency-range material must be   
					reproduced in churches, gymnasiums,   
					auditoriums, hotels and civic centers.   
					Description   
					The Electro-Voice EVI-15 full-range loud-   
					speaker is a factory assembled system featur-   
					ing a small-format Vari Intense® horn and a   
					15-inch direct radiator in a vented enclosure.   
					The EVI-15 is intended to be used as a stand-   
					alone full-range system, but may also be used   
					as the mid-bass/high-frequency component in   
					most multi-way loudspeaker systems.   
					The EVI-15 consists of a proprietary cast-   
					frame 381-mm (15-in.) high-power, long-   
					excursion low-frequency driver mounted   
					within a vented chamber of 3.4 cubic feet,   
					optimally tuned to provide unequalized low-   
					frequency response to below 50 Hz. The   
					high-frequency complement consists of a   
					25.4-mm (1.0-in.) exit compression driver   
					utilizing a new small-format Vari Intense®   
					horn. Vari Intense® is a revolutionary pat-   
					ented6 technology that throws a 6-to 10-dB   
					hotter signal to the back of the room. This   
					compensates for the drop in SPL over the   
					longer distance to the back of the room   
					(25 feet for the short throw and about 70 feet   
					for the long throw in a typical room). This   
					single horn replaces a short-throw/long-   
					throw horn combination, reducing the ma-   
					terial and labor costs of an installation.   
					Electrical connections to the system are   
					1 
					Architects' and Engineers'   
					Specifications   
					The loudspeaker system shall be of the full-   
					range type consisting of a single 381-mm   
					(15-in.) cast-frame high-power woofer in a   
					vented enclosure and a 25.4 mm (1-in.) exit   
					compression driver loaded with a small-for-   
					mat Vari Intense® horn. The loudspeaker sys-   
					tem shall meet the following performance   
					criteria. Power handling shall be 250 watts   
					of pink noise with a 6-dB crest factor for eight   
					hours, band limited from 50 Hz to 20 kHz.3   
					Frequency response shall be smooth and   
					uniformly usable from 50 Hz to 20 kHz.   
					Pressure sensitivity shall be 100 dB SPL   
					when measured at one meter on axis with   
					one watt of band-limited pink noise from   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				EVI-15 Full-Range Loudspeaker   
					Figure 2—EVI-15 Impedance   
					Figure 3—EVI-15 Distortion 1% power   
					Figure 4—EVI-15 Distortion 10%   
					power   
					3 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				EVI-15 Full-Range Loudspeaker   
					This system side view provides a means of   
					Figure 5—EVI-15 Polar Response   
					orientation for the vertical polar data. Hori-   
					zontal data (short throw) is presented con-   
					ventionally. Please reference the Applica-   
					tions Guide for more information on inter-   
					preting the polar data.   
					90º   
					Scale: 5 dB/division   
					Horizontal   
					60º   
					Vertical   
					30º   
					0º   
					4 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				EVI-15 Full-Range Loudspeaker   
					Figure 6—EVI-15 Beamwidth -   
					Long Throw   
					- Horizontal   
					- Vertical   
					Figure 7—EVI-15 Beamwidth -   
					Short Throw   
					- Horizontal   
					- Vertical   
					Figure 8—EVI-15 Directivity   
					Figure 9—EVI-15 Dimensions   
					5 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				EVI-15 Full-Range Loudspeaker   
					Short Throw:   
					Horizontal, 600 Hz-20 kHz:   
					110° (+25°, -25°)   
					Vertical, 600 Hz-20 kHz:   
					90° (+25°, -18°)   
					Directivity Factor, Rθ (Q), 1.2-20 kHz:   
					14.0 (+5.5, -4.0)   
					Directivity Index, Di, 1.2-20 kHz   
					12.5 dB (+1.2 dB, -2.7 dB)   
					Components:   
					High-efficiency, high-power cast-   
					frame 381-mm (15-inch) woofer with   
					one 25.4-mm (1.0-inch) exit com-   
					pression driver mounted to a small-   
					format Vari Intense® horn   
					Input Terminals:   
					Large screw terminals   
					Replacement LF:   
					1815-0992   
					Replacement HF:   
					833-0990   
					Replacement Grille:   
					73574 black   
					73753 white   
					Enclosure:   
					Specifications:   
					Direct-radiating vented LF, built of   
					19-mm (0.75-inch), 7-ply birch   
					plywood with appropriate bracing,   
					lined with glass wool; five 3/8-16   
					shoulder bolt hanging points included   
					Dimensions:   
					584 mm (23.0 in.) high   
					429 mm (16.9 in.) wide   
					766 mm (30.2 in.) deep   
					Net Weight:   
					24.0 kg (53 lb)   
					Shipping Weight:   
					28.2 kg (62 lb)   
					Finish:   
					Black or white textured paint with   
					black or white 16-gauge powder-coated   
					grille   
					Accessories:   
					Electro-Voice MB-EVI15 U-Bracket   
					suspension kit   
					Versions Available:   
					EVI-15 black   
					EVI-15 white   
					System Type:   
					Direct-radiating vented-bass full-   
					range loudspeaker system   
					Pressure Sensitivity: 1   
					100 dB SPL   
					Frequency Response (see Figure 1): 2   
					50 Hz - 20 kHz   
					Power Handling: 3   
					250 watts, long-term continuous   
					1,000 watts, peak power   
					Maximum Output: 4   
					123 dB SPL, long-term continuous   
					128 dB SPL, peak power   
					Impedance (see Figure 2):   
					8.0 ohms nominal   
					5.9 ohms minimum (15.8 kHz)   
					Beamwidth,   
					Long Throw:   
					Electro-Voice EBK-1 Eyebolt suspen-   
					sion kit   
					Horizontal, 1-20 kHz:   
					60° (+30°, -2°)   
					Vertical, 1-20 kHz:   
					70° (+30°-10°)   
					3. This system rating is patterned after the   
					ANSI/EIA RS-426-A method where the test   
					signal is pink noise with a 6-dB crest factor   
					over the bandwidth of the system, with   
					power calculated using E2/RE x 1.15, for 8   
					hours.   
					5. The distortion at any given frequency   
					may be found by graphically taking the dif-   
					ference between the fundamental and har-   
					monic, and adding the number of decibels   
					which the harmonic has been raised on the   
					graph and apply the formula: percent dis-   
					Notes on Measurement Conditions   
					1. Band-limited pink noise signal, one watt   
					calculated using E2/Zmin, 3.16-meter measure-   
					ment distance referred to one meter.   
					2. On-axis, one watt calculated using E2/Zmin   
					, 
					(-difference in dB/20)   
					tortion = 100 x 10   
					3.16-meter measurement distance referred to   
					one meter, low frequencies corrected for   
					anechoic-chamber error.   
					4. This measurement made under the same   
					conditions as pressure sensitivity, and takes   
					into account any power-compression effects   
					due to nonlinearities in the system.   
					6. The use of Vari Intense® horns is protected   
					by U.S. patent # 5,020,630.   
					600 Cecil Street, Buchanan, MI 49107   
					616/695-6831, 616/695-1304 Fax   
					©Telex Communications, Inc., 1998 • Litho in U.S.A.   
					Part Number 534764-EXP.— 9820   
					6 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |