Edirol Portable Speaker MA 1EX User Manual

Owners Manual  
Bedienungsanleitung  
Mode d’emploi  
Manuale d’uso  
Manual del usuario  
Left  
Right  
USB  
Rear Panel  
MD, DAT  
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT  
NOTES.” These sections provide important information concerning the proper operation of the unit.  
Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your  
new unit, Getting Started should be read in its entirety. The manual should be saved and kept on hand as a  
convenient reference.  
Copyright © 2005 ROLAND CORPORATION  
All rights reserved. No part of this publication may be reproduced in any form without the written  
permission of ROLAND CORPORATION.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Immediately turn the power off, and  
request servicing by your retailer, the  
nearest Roland Service Center, or an  
authorized Roland distributor, as  
listed on the “Information” page  
when:  
• If smoke or unusual odor occurs  
• Objects have fallen into, or liquid  
has been spilled onto the unit; or  
• The unit has been exposed to rain  
(or otherwise has become wet); or  
• The unit does not appear to operate  
normally or exhibits a marked  
change in performance.  
..................................................................................................  
• In households with small children, an  
adult should provide supervision  
until the child is capable of following  
all the rules essential for the safe  
operation of the unit.  
..................................................................................................  
• Protect the unit from strong impact.  
(Do not drop it!)  
• Try to prevent cords and cables from  
becoming entangled. Also, all cords  
and cables should be placed so they are out of  
the reach of children.  
* Microsoft and Windows are registered  
trademarks of Microsoft Corporation.  
* The screen shots in this document are  
used in compliance with the guidelines of  
the Microsoft Corporation.  
..................................................................................................  
• Never climb on top of, nor place heavy  
objects on the unit.  
* Windows® is known officially as:  
“Microsoft® Windows® operating sys-  
tem.”  
..................................................................................................  
Disconnect all cords coming from  
external devices before moving the unit.  
* Apple and Macintosh are registered  
trademarks of Apple Computer, Inc.  
* Mac OS is a trademark of Apple Comput-  
er, Inc.  
* All product names mentioned in this doc-  
ument are trademarks or registered trade-  
marks of their respective owners.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT NOTES  
Additional Precautions  
In addition to the items listed under “USING  
THE UNIT SAFELY” on page 2 and 3, please  
read and observe the following:  
• Do not play back sine waves or other continuous  
tones at high volume.  
Doing so may damage your amp and/or speakers.  
• Use a reasonable amount of care when using the  
unit’s buttons, sliders, or other controls; and when  
using its jacks and connectors. Rough handling can  
lead to malfunctions.  
Placement  
• Using the unit near power amplifiers (or other  
equipment containing large power transformers)  
may induce hum. To alleviate the problem, change  
the orientation of this unit; or move it farther away  
from the source of interference.  
• When connecting / disconnecting all cables, grasp  
the connector itself—never pull on the cable. This  
way you will avoid causing shorts, or damage to the  
cable’s internal elements.  
• This device may interfere with radio and television  
reception. Do not use this device in the vicinity of  
such receivers.  
• To avoid disturbing your neighbors, try to keep the  
unit’s volume at reasonable levels. You may prefer to  
use headphones, so you do not need to be concerned  
about those around you (especially when it is late at  
night).  
• Noise may be produced if wireless communications  
devices, such as cell phones, are operated in the  
vicinity of this unit. Such noise could occur when  
receiving or initiating a call, or while conversing.  
Should you experience such problems, you should  
relocate such wireless devices so they are at a greater  
distance from this unit, or switch them off.  
• When you need to transport the unit, pack it in  
shock-absorbent material. Transporting the unit  
without doing so can cause it to become scratched or  
damaged, and could lead to malfunction.  
• Be sure to avoid inserting your fingers in the bass  
reflex portswhen transporting or moving the  
speakers, as your fingers maybecome wedged and  
stuck in the ports.  
• Do not expose the unit to direct sunlight, place it  
near devices that radiate heat, leave it inside an  
enclosed vehicle, or otherwise subject it to temper-  
ature extremes. Excessive heat can deform or  
discolor the unit.  
• When moved from one location to another where the  
temperature and/or humidity is very different,  
water droplets (condensation) may form inside the  
unit. Damage or malfunction may result if you  
attempt to use the unit in this condition. Therefore,  
before using the unit, you must allow it to stand for  
several hours, until the condensation has completely  
evaporated.  
Copyright  
• When exchanging audio signals through a digital  
connection with an external instrument, this unit can  
perform recording without being subject to the  
restrictions of the Serial Copy Management System  
(SCMS). This is because the unit is intended solely  
for musical production, and is designed not to be  
subject to restrictions as long as it is used to record  
works (such as your own compositions) that do not  
infringe on the copyrights of others. (SCMS is a  
feature that prohibits second-generation and later  
copying through a digital connection. It is built into  
MD recorders and other consumer digital-audio  
equipment as a copyright-protection feature.)  
Maintenance  
• For everyday cleaning wipe the unit with a soft, dry  
cloth or one that has been slightly dampened with  
water. To remove stubborn dirt, use a cloth impreg-  
nated with a mild, non-abrasive detergent. After-  
wards, be sure to wipe the unit thoroughly with a  
soft, dry cloth.  
• Never use benzine, thinners, alcohol or solvents of  
any kind, to avoid the possibility of discoloration  
and/or deformation.  
• Do not use this unit for purposes that could infringe  
on a copyright held by a third party. We assume no  
responsibility whatsoever with regard to any  
infringements of third-party copyrights arising  
through your use of this unit.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Getting Connected and Installing Drivers English.............................6  
Settings and checking (Windows).......................................................................... 10  
Mac OS 9 Users ......................................................................................................... 14  
Herstellung der Verbindung und Installation der Treiber Deutsch ....16  
Mac OS X-Anwender................................................................................................ 17  
Connexion et installation des pilotes Français.................................18  
Mac OS X.................................................................................................................... 19  
Utenti di Windows XP ............................................................................................. 20  
Conexión e instalación de los controladores Español ......................22  
Usuarios de Windows XP........................................................................................ 22  
Usuarios de Mac OS X.............................................................................................. 23  
Troubleshooting .............................................................................24  
Problems related to the USB driver........................................................................ 24  
Problems when using the MA-1EX........................................................................ 25  
Deleting the USB Audio Device driver.................................................................. 29  
Specifications .................................................................................30  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Connected and Installing Drivers English  
Before installing the driver  
* The MA-1EX cannot be used with Windows 95 or Windows NT.  
* Exit all other applications of the Windows before you install the MA-1EX driver.  
* If you intend to connect the MA-1EX and other USB devices to your computer and use them  
simultaneously, disconnect all USB devices other than the MA-1EX from the USB  
connector before you install the driver. If a USB device other than the USB is left connected  
to your computer when you install the driver, the driver may not be installed correctly.  
In order to use the MA-1EX, you must first install the USB driver. These drivers are  
included with Windows or Mac OS.  
What is a driver?  
A driver is software that allows an application program running on your computer  
to transfer data to and from the MA-1EX when it is connected to your computer via  
a USB cable.  
Application  
USB connector  
Driver  
USB cable  
MA-1EX  
Computer  
The procedure for installation and settings will differ depending on your system.  
Proceed to the appropriate section as follows.  
• Windows XP/2000 users.......(p. 7)  
• Windows Me users................(p. 7)  
• Windows 98 users ................(p. 8)  
• Mac OS X Users.....................(p. 13)  
• Mac OS 9 Users.....................(p. 14)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Getting Connected and Installing Drivers English  
Windows XP/2000 users  
Windows Me users  
1. With the MA-1EX disconnected, start up  
*
In order to install software in Windows XP/  
2000, you must log on as a user who has  
administrative privileges (e.g.,  
Administrator).  
Windows.  
*
*
*
Disconnect all USB cables except for a USB  
keyboard and USB mouse (if used).  
1. With the MA-1EX disconnected, start up  
Exit all currently running software  
(applications).  
Windows.  
*
*
*
Disconnect all USB cables except for a USB  
keyboard and USB mouse (if used).  
If you are using a virus checker or similar  
software, be sure to exit it as well.  
Exit all currently running software  
(applications).  
2. Use the USB cable to  
connect the MA-1EX to  
your computer, and  
If you are using a virus checker or similar  
software, be sure to exit it as well.  
turn on the MA-1EX’s  
power (turn the  
VOLUME knob toward the right).  
2. Use the USB cable to  
connect the MA-1EX to  
your computer, and  
turn on the MA-1EX’s  
power (turn the  
VOLUME knob toward the right).  
The MA-1EX (USB Audio) will be  
detected automatically, and the driver  
will be installed.  
This unit is equipped with a protection circuit.  
A brief interval (a few seconds) after  
connecting a USB connector is required before  
the unit will operate normally.  
3. Windows will detect the MA-1EX (USB  
Audio), and the “Add New Hardware  
Wizard” dialog box will appear.  
Make sure that Automatic search for a  
better driver (Recommended) is  
selected, and click [Next].  
If you are using Windows XP, the installation  
has been completed when the message near the  
taskbar saying that “Found New Hardware”  
has disappeared.  
4. Driver detection will begin.  
942*  
5. When the driver has been found, driver  
installation will begin.  
This unit is equipped with a protection circuit.  
A brief interval (a few seconds) after  
connecting a USB connector is required before  
the unit will operate normally.  
*
of time may be required for the device to be  
detected after the driver has been installed.  
6. Once the driver has been installed, a  
dialog box will inform you of this.  
Click [Finish].  
3. Restart Windows.  
Next, you need to make the driver  
settings. “Settings and checking  
(Windows)” (p. 10)  
7. Restart Windows.  
Next, you need to make the driver  
settings. “Settings and checking  
(Windows)” (p. 10)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Getting Connected and Installing Drivers English  
4. When “What do you want Windows to  
do?” appears, select “Search for the  
best driver for your device  
(Recommended),and click [Next].  
fig.05-27e_30  
Windows 98 users  
*
The driver necessary for using the MA-1EX  
with Windows 98 is provided on the Windows  
CD-ROM. Make sure that you have the  
Windows CD-ROM available.  
5. A dialog box like the one shown will  
appear.  
*
Some computers are sold with the contents of  
the Windows CD-ROM stored on the hard  
disk, and therefore will not come with a  
Windows CD-ROM. If this is the case for your  
computer, you’ll be able to install the driver  
even without the Windows CD-ROM.  
Check CD-ROM drive, and click [Next].  
*
The USB composite device driver is  
installed first, then the USB audio device  
driver is installed. Use the following  
procedure to install the drivers.  
*
If the display indicates “Can’t find an updated  
driver for this device,check “Updated  
driver,and click [Next].  
1. With the MA-1EX disconnected, start up  
Windows.  
6. A dialog box like the one shown will  
*
*
Disconnect all USB cables except for a USB  
keyboard and USB mouse (if used).  
appear.  
Click [Next].  
Exit all currently running software  
(applications).  
If you are using a virus checker or similar  
software, be sure to exit it as well.  
2. Use the USB cable to  
connect the MA-1EX to  
your computer, and  
*
Depending on your system, the Driver  
location may differ from the illustration, but  
this is not a problem.  
turn on the MA-1EX’s  
power (turn the  
VOLUME knob toward the right).  
7. File (driver) copying will begin.  
*
This unit is equipped with a protection circuit.  
A brief interval (a few seconds) after  
connecting a USB connector is required before  
the unit will operate normally.  
If the Windows CD-ROM is not inserted  
in the CD-ROM drive, a “Insert Disk”  
dialog box may appear. In this case, insert  
the Windows CD-ROM into the CD-ROM  
drive and click [OK].  
3. USB composite device will be detected  
automatically, and the “Add New  
Hardware Wizard” dialog box will  
appear. Click [Next].  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Connected and Installing Drivers English  
8. When installation of the USB Composite  
Device driver is completed, a dialog box  
like the one shown here will appear.  
Click [Finish].  
fig.05-27e_30  
9. Next, the USB audio device will be  
detected automatically, and the “Add  
New Hardware Wizard” dialog box will  
appear.  
Click [Next], and proceed with the  
installation in the same way as in steps 3–  
7.  
10. When installation of the USB audio  
device driver is complete, a dialog box  
like the one shown here will appear.  
Click [Finish].  
fig.05-27e_30  
Installation of the USB composite  
device driver and USB audio device  
driver has been completed.  
Restart Windows.  
Next, you need to make the driver  
settings. “Settings and checking  
(Windows)” (p. 10)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Connected and Installing Drivers English  
Windows 98 users  
Settings and checking  
(Windows)  
1. Open the Multimedia Properties dialog  
box.  
1.Click the Windows Start button,  
and from the menu that appears,  
select Settings | Control Panel.  
2.In Control Panel, double-click the  
Multimedia icon.  
Specifying the audio output  
destination  
Windows XP users  
1. Open the Sound, Speech, and Audio  
Devices Properties dialog box.  
2. Click the Audio tab.  
3. For Playback field, click the located at  
the right of [Preferred device], and select  
USB Audio Device.  
1.From the Windows start menu,  
choose Control Panel.  
2.In “Pick a category,” click Sound,  
Speech, and Audio Devices.  
3.In “or Pick a Control Panel icon,”  
click the Sounds and Audio  
Devices icon.  
4. Click [OK] to complete the settings.  
2. Click the Audio tab.  
3. For Sound playback, click the located  
at the right of [Default device], and select  
USB Audio.  
4. Click [OK] to complete the settings.  
Windows 2000/Me users  
1. Open the Sounds and Multimedia  
Properties dialog box  
1.Click the Windows Start button,  
and from the menu that appears,  
select Settings | Control Panel.  
2.In Control Panel, double-click the  
Sounds and Multimedia icon.  
If the Sound and Multimedia icon  
is not displayed, click “Show all  
control panel options” in the  
frame at the left.  
2. Click the AUDIO tab.  
3. For Sound Playback (or in Windows  
Me, Playback), click the located at the  
right of [Preferred device], and select  
USB Audio Device.  
4. Click [OK] to complete the settings.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Connected and Installing Drivers English  
Volume Control setting  
Check whether there is  
sound  
If you have installed the Standard driver,  
the MA-1EX can use the Windows volume  
control to adjust the output volume.  
Now we will check whether connections  
are correct.  
1. Open the Volume Control.  
Click the Windows Start menu, and select  
Programs (or in Windows XP, All  
programs) | Accessories |  
1. Open the Control Panel.  
Windows XP users  
1.From the Windows start menu,  
choose Control Panel.  
Entertainment | Volume Control.  
2.In “Pick a category,” click Sound,  
Speech, and Audio Devices.  
3.In “or Pick a Control Panel icon,”  
click the Sounds and Audio  
Devices icon.  
*
What you actually see on your computer  
screen may be different, depending on your  
computing environment and the operating  
system you’re using.  
Windows 2000/Me users  
*
If the Volume Control is not installed on  
your computer, use the Control Panel icon  
Add or Remove Programs to install it. For  
details on installation, refer to the Windows  
manual or Help.  
1.Click the Windows Start button,  
and from the menu that appears,  
select Settings | Control Panel.  
2.In Control Panel, double-click the  
Sounds and Multimedia icon.  
If the Sound and Multimedia icon  
is not displayed, click “Show all  
control panel options” in the  
frame at the left.  
2. Raise or lower the slider to adjust the  
volume of the MA-1EX.  
This will change the volume of the MA-  
1EX’s speaker output.  
Items that can be set  
Windows 98 users  
WAVE  
Controls the volume of  
sound output from “MA-  
1EX (or USB Audio Device)”  
audio output device.  
Controls the volume of the  
software synthesizer built  
into Windows.  
Controls the volume of “au-  
dio CDs” on the internal CD-  
ROM drive of the computer.  
(*1)  
1.Click the Windows Start button,  
and from the menu that appears,  
select Settings | Control Panel.  
2.In Control Panel, double-click the  
Sounds icon.  
SW  
Synth  
2. Click the Sounds tab.  
CD  
Player  
3. In Program Events (Sound Events,  
Events), click the desired sound, then  
click  
.
*1 If the CD playback volume does not  
change when you adjust this control, then  
change the WAVE volume.  
Sound should be heard from the MA-1EX.  
If you hear sound, the MA-1EX is  
correctly connected to your computer,  
and the driver has also been installed  
correctly.  
You will be able to use the MA-1EX at the  
best audio quality if you set the Volume  
Control volume to the maximum setting.  
If Mute is checked or if the slider is  
lowered all the way, no sound will be  
output from the MA-1EX.  
*
If you don’t hear sound, refer to  
Troubleshooting (p. 24) and take the  
appropriate measures to solve the problem.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Connected and Installing Drivers English  
When playing audio CDs from the computer’s internal CD-ROM  
drive, or using the MA-1EX to play game music  
Windows XP/2000 users:  
1. Open the System Properties dialog box.  
Select Start | Settings | Control Panel, and in the Control Panel, double-click the System  
icon.  
(Windows XP– Click the Windows start button, and from the menu that appears, select  
Control Panel.)  
2. Open the Device Manager.  
Click the Hardware tab, and click the Device Manager button.  
3. Open the CD-ROM(DVD-ROM/CD-ROM) drive’s Properties.  
In CD-ROM drive, double-click the CD-ROM drive that you are using.  
4. Click the Properties tab, and in Digital CD Playback, check the “Enable digital CD audio  
for this CD-ROM device” item.  
Windows Me users:  
1. Open System Properties dialog box.  
Select Start | Settings | Control Panel, and in Control Panel, double-click the System icon.  
2. Open the Device Manager.  
Click the Device Manager tab.  
3. Open the CD-ROM drive’s Properties.  
Double-click the CD-ROM icon, and then double-click the CD-ROM drive that you are  
using.  
4. Click the Properties tab, and in Digital CD Playback, check the “Enable digital CD audio  
for this CD-ROM device” item.  
Windows 98 users:  
1. Open the Multimedia Properties dialog box.  
Select Start | Settings | Control Panel, and in Control Panel, double-click the Multimedia  
icon.  
2. Click the CD Music tab, and check the “Enable digital CD audio for this CD-ROM  
device” item.  
* Depending on your system, playback may still not be possible. For details, please contact the  
manufacturer of your computer. If you are using a PC-card (PCMCIA) type CD-ROM drive,  
playing back WAVE data from a CD-ROM or playing an audio CD may cause interrupted  
sound, or possibly no sound at all.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Connected and Installing Drivers English  
6. Click the Output tab, and choose USB  
Audio as the device that will output  
sound.  
Mac OS X Users  
*
If a “Authenticate” dialog box appears during  
the installation, enter the password and click  
[OK].  
Known issues: MA-1EX  
*
*
The contents of the display may differ  
depending on your system.  
Caution  
Please check the following before you use  
your software.  
Operation may become unstable if you start  
up your Macintosh with the MA-1EX  
connected. If this occurs, start up your  
Macintosh with the MA-1EX disconnected,  
and then connect the MA-1EX.  
If your software allows you to make  
audio output settings, choose USB  
Audio. For details, refer to the  
owner’s manual of the software you  
are using.  
1. With the MA-1EX disconnected, start up  
the Macintosh.  
Use the USB cable to connect the MA-  
1EX to your computer before you start  
up your software.  
Disconnect all USB cables except for a  
USB keyboard and USB mouse (if used).  
Do not disconnect the MA-1EX’s USB  
cable while your software is running.  
Exit your software before you  
disconnect the MA-1EX’s USB cable.  
The MA-1EX will not operate in the  
Mac OS X Classic environment. You  
can not use it if the Classic  
2. Exit all currently running software  
(applications).  
If you are using virus checking or similar  
software, be sure to exit it as well.  
3. Use the USB cable to  
connect the MA-1EX to  
your Macintosh, and  
environment is running.  
turn on the MA-1EX’s  
power (turn the  
VOLUME knob toward the right).  
This unit is equipped with a protection circuit.  
A brief interval (a few seconds) after  
connecting a USB connector is required before  
the unit will operate normally.  
4. Open the System Preference dialog box  
and click Sound.  
5. In the Sound Effects tab, click Play  
alerts and sound effects through and  
choose USB Audio as the playback  
device for sound effects.  
If no sound is output from the speaker (internal  
speaker) of the Macintosh, choose “Built-in  
audio controller” in the Output tab.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Connected and Installing Drivers English  
8. In order to check that detection has been  
completed, once again go to Apple  
Mac OS 9 Users  
System Profiler, and select Update all  
information from the Commands menu.  
In the USB area, two audio devices “Audio  
(USB Audio)“ will be displayed.  
*
Operation may become unstable if you start  
up your Macintosh with the MA-1EX  
connected. If this occurs, start up your  
Macintosh with the MA-1EX disconnected,  
and then connect the MA-1EX.  
1. With the MA-1EX disconnected, start up  
the Macintosh.  
If these are displayed correctly, driver  
installation has succeeded. In the File  
menu, click Quit to close “Apple System  
Profiler.”  
Disconnect all USB cables except for a  
USB keyboard and USB mouse (if used).  
If they are not displayed correctly,  
disconnect the MA-1EX, wait for about  
ten seconds, and then repeat the  
procedure from step 2.  
2. Exit all currently running software  
(applications).  
If you are using virus checking or similar  
software, be sure to exit it as well.  
3. After starting up Mac OS, select Apple  
System Profiler from the Apple menu.  
The “Apple System Profiler” dialog box  
will appear.  
Adjusting the Sound  
Output  
1. From the Apple menu, select Control  
Panels - Sound to open the Sound  
dialog box.  
4. Click the Devices and Volumes tab.  
5. Choose Update all information from the  
Commands menu.  
2. Click the Speakers tab or Speaker  
Setup.  
6. Use the USB cable to  
connect the MA-1EX to  
your Macintosh, and  
turn on the MA-1EX’s  
power (turn the  
3. Turn down the volume on the MA-1EX  
and on your audio equipment, then click  
[Start Test].  
VOLUME knob toward the right).  
4. When you are finished, click [Stop Test].  
Test sounds are output from left to right,  
along with what appears on the screen.  
942*  
This unit is equipped with a protection circuit.  
A brief interval (a few seconds) after  
connecting a USB connector is required before  
the unit will operate normally.’  
*
If you don’t hear sound, refer to  
Troubleshooting (p. 24) and take the  
appropriate measures to solve the problem.  
5. When you are finished making settings,  
close the “Sound” dialog box.  
7. Wait for approximately five seconds.  
While you are waiting, the screen display  
will not change, but the MA-1EX is being  
detected. Do not touch the mouse or  
keyboard.  
Select Quit from the File menu.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MEMO  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Herstellung der Verbindung und Installation der Treiber Deutsch  
Das Audio-Ausgangsziel wird  
festgelegt  
Windows XP-Anwender  
*
Um Software in Windows XP installieren zu  
können, müssen Sie sich als Benutzer mit  
Administrationsrechten (z. B. Administrator)  
anmelden.  
1. Systemsteuerung öffnen.  
Klicken Sie auf die Windows Start-  
Schaltfläche und wählen Sie im  
Folgemenü Systemsteuerung.  
1. Starten Sie Windows, wobei das MA-1EX  
2. Öffnen Sie das Dialogfeld Eigenschaften  
von Sounds und Audiogeräten.  
nicht angeschlossen ist.  
*
Entfernen Sie sämtliche USB-Kabel außer  
denen der USB-Tastatur und der USB-Maus  
(falls vorhanden).  
Klicken Sie in “Wählen Sie eine Kategorie”  
auf “Sound, Sprache und Audiogeräte”.  
Klicken Sie dann in “oder wählen Sie ein  
Systemsteuerungssymbol” auf das Symbol  
Sounds und Audiogeräte.  
*
*
Beenden Sie alle aktuell ausgeführten  
Programme (Anwendungen).  
Wenn Sie ein Virenschutzprogramm oder  
ähnliche Software verwenden, müssen Sie  
diese ebenfalls beenden.  
*
Abhängig von der Konfiguration Ihres  
Systems kann es vorkommen, dass das Symbol  
Sounds und Audiogeräte sofort in der  
Systemsteuerung (in der klassischen  
Anzeige) angezeigt wird. Doppelklicken Sie in  
diesem Fall auf das Symbols Sounds und  
2. Verwenden Sie ein  
USB-Kabel, um MA-  
1EX an Ihren Computer  
anzuschließen und  
Audiogeräte  
.
schalten Sie die  
3. Klicken Sie auf die Registerkarte Audio  
.
Stromversorgung von MA-1EX ein  
(drehen Sie den Lautstärkeschalter  
(VOLUME) nach rechts).  
Der MA-1EX (USB Audio) wird  
automatisch erkannt und der Treiber wird  
installiert.  
4. Wählen Sie als Standardgerät für  
Soundwiedergabe USB Audio CODEC  
oder USB Audio Gerät.  
Klicken Sie auf  
und klicken Sie in der  
Liste, die dann erscheint auf USB Audio  
CODEC oder USB Audio Gerät, um  
eines auszuwählen.  
Die Installation ist abgeschlossen, wenn die  
neben der Taskleiste angezeigte Meldung  
“Found New Hardware” (Neue Hardware  
gefunden) verschwunden ist.  
5. Klicken Sie auf OK, um die Einstellungen  
zu vervollständigungen.  
Dies vervollständigt die Einstellungen  
des Audio-Ausgangsziels.  
Dieses Gerät ist mit einem Schutzschaltkreis  
ausgestattet. Nach dem Anschluss eines USB-  
Steckers benötigt das Gerät eine kurze  
Zeitspanne von einigen Sekunden, bis es den  
normalen Betrieb aufnimmt.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Herstellung der Verbindung und Installation der Treiber Deutsch  
5. In der Registerkarte Soundeffekte  
klicken Sie auf Warnungen und  
Mac OS X-Anwender  
Soundeffekte abspielen über und  
wählen Sie USB Audio als  
*
Geben Sie in das eventuell während der  
Installation erscheinende  
Wiedergabegerät für Soundeffekte.  
Bestätigungsdialogfeld das Kennwort ein und  
klicken Sie auf [OK].  
*
*
Der Inhalt der Anzeige hängt von Ihrem  
System ab.  
Wenn kein Ton über die Lautsprecher des  
Macintosh ausgegeben wird (interner  
Sprecher), wählen Sie “Integrierter Audio-  
Controller” in der Ausgangsregisterkarte.  
Der Betrieb kann sich destabilisieren, wenn  
Sie Ihren Macintosh mit dem MA-1EX  
verbinden. Der Betrieb kann sich  
destabilisieren, wenn Sie Ihren Macintosh mit  
dem MA-1EX verbinden.  
6. Klicken Sie auf die Registerkarte  
Ausgang und anschließend auf USB  
Audio als das Tonausgabegerät.  
1. Starten Sie Macintosh, wobei das MA-  
1EX nicht angeschlossen ist.  
Bekannte Fragen: MA-1EX  
Entfernen Sie sämtliche USB-Kabel außer  
denen der USB-Tastatur und der USB-  
Maus (falls vorhanden).  
Vorsicht  
Bitte überprüfen Sie Folgendes vor dem  
Gebrauch der Software.  
2. Beenden Sie alle aktuell ausgeführten  
Programme (Anwendungen).  
Falls Ihre Software Ihnen die  
Einstellung des Audioausgangs  
gestattet, wählen Sie USB Audio.  
Einzelheiten hierzu finden Sie im  
Handbuch des Eigentümers der  
Software, die Sie benutzen.  
Wenn Sie ein Virenschutzprogramm oder  
ähnliche Software verwenden, müssen Sie  
diese ebenfalls beenden.  
3. Verwenden Sie ein  
USB-Kabel, um MA-  
Verwenden Sie ein USB-Kabel für die  
Verbindung zwischen MA-1EX und  
Ihrem Computer bevor Sie die  
Software starten.  
1EX an Ihren Macintosh  
anzuschließen und  
schalten Sie die  
Stromversorgung von MA-1EX ein  
(drehen Sie den Lautstärkeschalter  
(VOLUME) nach rechts).  
Ziehen Sie das USB-Kabel des MA-  
1EX nicht ab, während das  
Softwareprogramm läuft.  
Schließen Sie das Softwareprogramm  
bevor Sie das USB-Kabel des MA-1EX  
abziehen.  
Der MA-1EX funktioniert nicht in der  
Mac OS X Classic Umgebung. Sie  
können MA-1EX nicht verwenden,  
wenn die Classic Umgebung läuft.  
Dieses Gerät ist mit einem Schutzschaltkreis  
ausgestattet. Nach dem Anschluss eines USB-  
Steckers benötigt das Gerät eine kurze  
Zeitspanne von einigen Sekunden, bis es den  
normalen Betrieb aufnimmt. ’  
4. Öffnen Sie das Dialogfeld  
Systempräferenzen und klicken Sie auf  
Sound.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connexion et installation des pilotes Français  
Spécification de la destination de  
sortie audio  
Windows XP  
*
Pour installer un logiciel sous Windows XP,  
connectez-vous en tant qu’utilisateur  
disposant de droits d’administration (par  
exemple, Administrateur).  
1. Ouvrez le Panneau de configuration  
.
Cliquez sur le bouton Démarrer de  
Windows et sélectionnez Panneau de  
configuration  
2. Ouvrez la boîte de dialogue Propriétés  
de Sons et périphériques audio  
.
1. Démarrez Windows avant de brancher le  
MA-1E.  
.
*
Débranchez tous les câbles USB, sauf ceux du  
clavier USB ou de la souris USB, le cas  
échéant.  
Dans "Choisissez une catégorie"  
cliquez sur "Sons, voix et périphériques  
audio". Puis, dans “ou choisissez une  
,
*
*
Fermez tous les logiciels (applications) actifs.  
icône du Panneau de configuration”  
cliquez sur l’icône Sons et périphériques  
audio  
,
Si vous utilisez un programme antivirus ou  
des logiciels similaires, fermez-les également.  
.
*
Selon la configuration de l’ordinateur, il se  
peut que l’icône Sons et périphériques audio  
s’affiche directement dans le Panneau de  
configuration (vue classique). Si c'est le cas,  
double-cliquez sur l’icône Sons et  
2. Avec un câble USB,  
connectez le MA-1EX à  
votre ordinateur et  
allumez-le (tournez le  
bouton VOLUME vers  
la droite).  
périphériques audio  
.
Le MA-1EX (Audio USB) est  
automatiquement détecté ; le pilote est lui  
aussi installé automatiquement.  
3. Cliquez sur l'onglet Audio  
.
4. Choisissez CODEC Audio USB ou  
Périphérique Audio USB comme Unité  
par défaut de Lecture audio.  
Cliquez sur  
et, dans la liste qui  
L’installation est terminée lorsque le message  
"Nouveau matériel détecté" a disparu de la  
barre des tâches.  
apparaît, cliquez sur CODEC Audio USB  
ou sur Périphérique Audio USB pour le  
sélectionner.  
5. Cliquez sur OK pour terminer la  
configuration.  
Cet appareil est équipé d’un circuit de  
protection. Après avoir branché un connecteur  
USB, il est nécessaire de patienter quelques  
secondes avant que l’appareil ne fonctionne  
normalement.  
Cela termine la configuration de la  
destination de sortie audio.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connexion et installation des pilotes Français  
Mac OS X  
Si le haut-parleur (interne) de votre Macintosh  
n'émet aucun son, choisissez “Audio intégré”  
sur l'onglet Sortie.  
*
Si une boîte de confirmation s’affiche pendant  
l’installation, saisissez le mot de passe et  
cliquez sur [OK].  
6. Cliquez sur l'onglet Sortie et choisissez  
Audio USB comme périphérique  
d'émission du son.  
*
*
Le contenu de cette boîte dépend de votre  
système.  
Il se peut que vous rencontriez des problèmes  
d'installation si le MA-1EX était connecté  
lorsque vous avez démarré votre Macintosh. Si  
cela se produit, débranchez le MA-1EX avant  
de démarrer votre ordinateur, puis connectez-  
le.  
Problèmes connus : MA-1EX  
Attention  
Veuillez vérifier les points suivants avant  
d'utiliser votre logiciel.  
Si votre logiciel propose des  
paramètres de sortie audio, choisissez  
Audio USB. Pour plus de détails,  
reportez-vous au guide d'utilisation  
du logiciel que vous utilisez.  
Connectez le MA-1EX à votre  
ordinateur par un câble USB avant de  
démarrer votre logiciel.  
1. Démarrez votre Macintosh avant de  
brancher le MA-1EX.  
Débranchez tous les câbles USB, sauf ceux  
du clavier USB ou de la souris USB, le cas  
échéant.  
2. Fermez tous les logiciels (applications)  
actifs.  
Ne débranchez pas le câble USB du  
MA-1EX tant que votre logiciel est  
ouvert.  
Si vous utilisez un programme antivirus  
ou des logiciels similaires, fermez-les  
également.  
Quittez votre logiciel avant de  
débrancher le câble USB du MA-1EX.  
Le MA-1EX ne fonctionne pas sous  
Mac OS X Classic. Vous ne pourrez  
pas l'utiliser dans l'environnement  
Classic.  
3. Avec un câble USB,  
connectez le MA-1EX à  
votre Macintosh et  
allumez-le (tournez le  
bouton VOLUME vers  
la droite).  
Cet appareil est équipé d’un circuit de  
protection. Après avoir branché un connecteur  
USB, il est nécessaire de patienter quelques  
secondes avant que l’appareil ne fonctionne  
normalement.  
4. Ouvrez la boîte de dialogue Préférences  
Système et cliquez sur Son.  
5. Sur l'onglet Effets sonores, cliquez sur  
Emettre alertes et effets sonores via et  
choisissez Audio USB comme  
périphérique de lecture des effets  
sonores.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Collegamenti e installazione dei driver Italiano  
Indicazione della destinazione audio  
di uscita  
Utenti di Windows XP  
*
Per poter installare il software su Windows  
XP, è necessario essere collegati con un nome  
utente dotato di privilegi di tipo  
1. Aprire il Pannello di controllo.  
In Windows, fare clic sul pulsante Start  
nel menu selezionare Pannello di  
controllo.  
e
amministrativo, ad esempio Administrator.  
1. Dopo aver scollegato l'MA-1EX, avviare  
2. Chiudere la finestra di dialogo Proprietà  
Windows.  
– Suoni e periferiche audio.  
*
Scollegare tutti i cavi USB, ad eccezione della  
tastiera e del mouse USB, se utilizzati.  
In “Scegliere una categoria”, fare clic su  
“Suoni, voce e periferiche audio”.  
Successivamente in “o un’icona del  
Pannello di controllo”, fare clic sull’icona  
Suoni e periferiche audio.  
*
*
Chiudere tutti i programmi in esecuzione.  
Se si utilizza un programma antivirus o  
simili, accertarsi che anch’esso sia chiuso.  
*
A seconda di come è configurato il sistema,  
l’icona Suoni e periferiche audio potrebbe  
essere visualizzata direttamente nel Pannello  
di controllo (visualizzazione classica). In tal  
caso fare doppio clic sull'icona Suoni e  
periferiche audio.  
2. Utilizzare un cavo USB  
per collegare l’MA-1EX  
al proprio computer, e  
accendere l’MA-1EX  
(girare la manopola del  
VOLUME verso destra).  
L’MA-1EX (Audio USB) verrà rilevato  
automaticamente e il driver verrà  
installato.  
3. Fare clic sulla scheda Audio  
.
4. Come Periferica predefinita per Suono  
di riproduzione, scegliere CODEC audio  
USB o Periferica audio USB.  
Fare clic  
, e dall’elenco che appare,  
L’installazione è stata completata quando  
scompare il messaggio “Trovato nuovo  
hardware” dalla barra delle applicazioni.  
selezionare CODEC audio USB o su  
Periferica audio USB.  
5. Fare clic su OK per completare le  
impostazioni.  
Questo apparecchio è provvisto di un circuito  
di protezione. È necessario aspettare qualche  
secondo dopo aver inserito un connettore USB  
prima che l’apparecchio funzioni normalmente.  
La configurazione delle destinazioni  
audio di uscita è giunta al termine.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Collegamenti e installazione dei driver Italiano  
6. Fare clic sulla scheda Output, e scegliere  
Audio USB come dispositivo di  
emissione del suono.  
Utenti Mac OS X  
*
Se durante l’installazione viene visualizzata la  
finestra di dialogo di conferma, inserire la  
password e fare clic su [OK].  
Problemi conosciuti MA-1EX  
*
*
Il contenuto del display può variare a seconda  
del sistema utilizzato.  
Avvertenze  
Tenere presente quanto indicato di  
seguito prima di utilizzare il software.  
L’accensione di Macintosh con l’MA-1EX  
collegato può rendere instabile il  
funzionamento. In questo caso, accendere il  
Macintosh con l’MA-1EX scollegato, e  
collegarlo in seguito.  
Se il software consente di configurare  
l’audio in uscita, scegliere Audio  
USB. Per maggiori informazioni,  
consultare il manuale dell’utente del  
software in uso.  
1. Dopo aver scollegato l'MA-1EX, avviare il  
Macintosh.  
Utilizzare il cavo USB per collegare  
l’MA-1EX al computer prima di  
avviare il software.  
Non scollegare il cavo USB dell’MA-  
1EX mentre il software è in  
Scollegare tutti i cavi USB, ad eccezione  
della tastiera e del mouse USB, se utilizzati.  
2. Chiudere tutti i programmi in esecuzione.  
Se si utilizza un programma antivirus o  
simile, accertarsi che sia anch’esso chiuso.  
esecuzione.  
Chiudere il software prima di  
scollegare il cavo USB dell’MA-1EX.  
L’MA-1EX non funziona in ambiente  
Classic Mac OS X. Non è possibile  
utilizzarlo quando l’ambiente Classic  
è in esecuzione.  
3. Utilizzare un cavo USB  
per collegare l’MA-1EX  
al proprio Macintosh, e  
accendere l’MA-1EX  
(girare la manopola del  
VOLUME verso destra).  
Questo apparecchio è provvisto di un circuito  
di protezione. È necessario aspettare qualche  
secondo dopo aver inserito un connettore USB  
prima che l’apparecchio funzioni normalmente.  
4. Aprire System Preference e fare clic su  
Sound.  
5. Nella scheda Sound Effects, fare clic su  
Play alerts and sound effects through  
e scegliere Audio USB come dispositivo  
di riproduzione per gli effetti sonori.  
Se i diffusori interni del Macintosh non  
emettono alcun suono, scegliere “Built-in  
audio controller” nella scheda Output.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Conexión e instalación de los controladores Español  
Especificación del destino de salida  
del audio  
Usuarios de Windows XP  
*
Para instalar software en Windows XP, debe  
iniciar una sesión como usuario con  
privilegios administrativos (como  
Administrador).  
1. Abra el Panel de control  
.
Haga clic en el botón Inicio de Windows  
y, en el menú que aparece, seleccione  
Panel de control  
2. Abra el cuadro de diálogo Propiedades  
de Dispositivos de sonido y audio  
.
1. Con el MA-1EX desconectado, inicie  
Windows.  
.
*
*
*
Desconecte todos los cables USB excepto el del  
teclado USB y el ratón USB (si se utilizan).  
En “Elegir una categoría”, haga clic en  
“Dispositivos de sonido, audio y voz”.  
continuación, en “o elegir un icono del  
Panel de control”, haga clic en el icono  
Dispositivos de sonido y audio.  
A
Salga de todos los programas de software que  
esté ejecutando (aplicaciones).  
Si utiliza un programa antivirus o software  
similar, también debe cerrarlo.  
*
En función de cómo tenga configurado el  
sistema, puede que el icono Dispositivos de  
sonido y audio aparezca directamente en el  
Panel de control (en la Vista clásica). En ese  
caso, haga doble clic en el icono Dispositivos  
2. Utilice un cable USB  
para conectar el MA-  
1EX al ordenador, y  
encienda el MA-1EX  
(gire el mando  
de sonido y audio  
.
VOLUME (volumen) hacia la derecha).  
El MA-1EX (audio USB) se detectará  
automáticamente, y el controlador se  
instalará.  
3. Haga clic en la ficha Audio  
.
4. Como Dispositivo predeterminado para  
Reproducción de sonido, seleccione  
USB Audio CODEC o Dispositivo de  
audio USB.  
Haga clic en  
, y en la lista que aparece,  
La instalación se ha completado cuando haya  
desparecido el mensaje junto a la barra de  
tareas que indica “Hardware nuevo  
encontrado”.  
haga clic en USB Audio CODEC o  
Dispositivo de audio USB para  
seleccionarlo.  
5. Haga clic en Aceptar para finalizar la  
configuración.  
Esta unidad está provista de un circuito de  
protección. Es necesario dejar pasar un  
pequeño intervalo (de unos segundos) después  
de encender la unidad para que ésta funcione  
correctamente.  
De este modo se completa la  
configuración del destino de salida de  
audio.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Conexión e instalación de los controladores Español  
Usuarios de Mac OS X  
Si no se emite ningún sonido por el altavoz  
(altavoz interno) del Macintosh, elija “Built-in  
audio controller” en la ficha Output.  
*
Si aparece un cuadro de diálogo de  
confirmación durante la instalación,  
introduzca la contraseña y haga clic en  
[Aceptar].  
6. Haga clic en la ficha Output, y elija Audio  
USB como dispositivo de salida de  
sonido.  
-------+  
*
*
El contenido de la pantalla puede diferir, en  
función del sistema.  
Pueden producirse problemas de estabilidad si  
inicia el Macintosh con el MA-1EX conectado.  
Si ocurre esto, inicie el Macintosh con el MA-  
1EX desconectado, y a continuación conecte el  
MA-1EX.  
Problemas conocidos: MA-1EX  
Precaución  
Compruebe lo siguiente antes de utilizar  
el software.  
Si el software le permite establecer  
una configuración de salida de audio,  
elija Audio USB. Para obtener más  
información, consulte el manual del  
usuario del software que esté  
utilizando.  
1. Con el MA-1EX desconectado, inicie el  
Macintosh.  
Desconecte todos los cables USB excepto  
el del teclado USB y el ratón USB (si se  
utilizan).  
Utilice el cable USB para conectar el  
MA-1EX al equipo antes de iniciar el  
software.  
No desconecte el cable USB del MA-  
1EX mientras el software esté  
ejecutándose.  
Salga del software antes de  
desconectar el cable USB del MA-1EX.  
El MA-1EX no funcionará en el  
entorno Classic de Mac OS X. No lo  
puede utilizar si se está ejecutando el  
entorno Classic.  
2. Salga de todos los programas de software  
que esté ejecutando (aplicaciones).  
Si utiliza un programa antivirus o  
software similar, también deberá cerrarlo.  
3. Utilice un cable USB  
para conectar el MA-  
1EX al Macintosh, y  
encienda el MA-1EX  
(gire el mando  
VOLUME (volumen) hacia la derecha).  
Esta unidad está provista de un circuito de  
protección. Es necesario dejar pasar un  
pequeño intervalo (de unos segundos) después  
de conectar un conector USB para que la  
unidad funcione correctamente.  
4. Abra el cuadro de diálogo System  
Preference y haga clic en Sonido.  
5. En la ficha Sound Effects, haga clic en  
Play alerts and sound effects through  
y elija Audio USB como dispositivo de  
reproducción para efectos de sonido.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
If an unexpected problem occurs while using the MA-1EX, please read this chapter first. It provides  
numerous hints that will help you solve problems.  
The problems covered in the troubleshooting section are organized according to  
the operating system on which the problem might be encountered.  
If you are using computer for the first time, or do not understand the explanation  
of a procedure, refer to the owner’s manuals for your computer or for OS.  
Problems common to both Windows and Macintosh  
Problems that occur only on Windows  
Problems that occur only on Macintosh  
Problems related to the USB driver  
“Add New Hardware Wizard” does not start up automatically  
“Add New Hardware Wizard” terminates before completion  
When the USB cable is connected, approximately 15 seconds (or more) may be required for the  
MA-1EX to be recognized.  
Is the USB cable connected correctly?  
Make sure that the MA-1EX and computer are connected correctly by the USB cable.  
Can USB be used on your computer?  
Refer to the owner’s manual for your computer, and make sure that it is able to use USB.  
Does your computer or USB hub have sufficient power supply capacity?  
The MA-1EX cannot be connected if insufficient power is supplied to it. Check whether one of the  
following cases apply.  
If you are using the MA-1EX with a notebook computer that is running on its battery, operation may be  
unreliable with some models of computer. If this is the case, connect the AC adaptor to your notebook  
computer.  
The power conservation mode of your computer may limit the power that is supplied to USB. Check the  
settings of your computer.  
In some cases, the MA-1EX cannot be used with a bus-powered hub (a hub that does not contain a power  
supply). Please use a self-powered hub (a hub that contains a power supply).  
Does your computer meet the USB specifications?  
If you are using a computer that does not meet the USB specifications (such as a homemade computer),  
operation may be unstable. In such cases, you may be able to solve the problem by connecting a USB hub  
that contains a power supply.  
Could other USB devices be connected?  
When installing, all USB devices other than the MA-1EX should be disconnected from your computer.  
If you have connected the MA-1EX to an external USB hard disk, please connect the MA-1EX directly to a  
USB connector on the computer itself.  
Could other applications or resident software (such as a virus checking program) be running?  
Installation may not occur correctly if other programs are running. Be sure to close all other programs  
before installing.  
Are the power conservation settings of your computer turned off?  
If power conservation settings are turned on for your computer, disable these settings. (For details on how  
to disable them, refer to the owner’s manual of your computer.)  
Is there enough free space on your hard disk?  
Delete unneeded files to increase the amount of free space.  
After deleting the file(s), empty the recycling bin.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Can’t install/uninstall the driver  
• Did you log onto Windows as a user with administrative privileges?  
user with administrative privileges, such as Administrator.  
You are asked for the driver file even though you installed the driver  
Did you connect the MA-1EX to a different USB connector than the one you used when installing  
the driver?  
If your computer or USB hub has two or more USB connectors, and you connect the MA-1EX to a USB  
connector to which you have not previously connected it, this dialog box may appear even though you  
have already installed the driver.  
Install the drivers once again as described in “Getting Connected and Installing Drivers English” (p. 6).  
This is not a malfunction.  
The MA-1EX Driver Is Not Installed Correctly.  
Use the procedure described in “Deleting the USB Audio Device driver” (p. 29) to delete the USB Audio  
Device driver installed in your computer, and install the drivers once again as described in “Getting  
Connected and Installing Drivers English” (p. 6).  
Check whether there is an item named “Unknown Device” in “Other devices” or in “Universal Serial  
Bus controllers.” If you find “Unknown Device,” delete it.  
Problems when using the MA-1EX  
OS becomes unstable  
Starting up a computer when the MA-1EX is already connected may cause the computer to become  
unstable.  
If this occurs, start up the computer with the MA-1EX disconnected, and then connect the MA-1EX. On a  
computer that uses a USB keyboard, starting up the computer with the MA-1EX already connected may  
cause operation to become unstable. In this case, start up the computer with the MA-1EX disconnected,  
and then connect the MA-1EX.  
No sound  
• Are you attempting to use the CD player of your computer to play an audio CD?  
If you wish to play an audio CD on the CD-ROM drive of your computer, refer to “When playing audio  
CDs from the computer’s internal CD-ROM drive, or using the MA-1EX to play game music” (p. 12).  
• Are you running multiple software?  
If multiple software are running simultaneously, an error message may appear. If this occurs, click [OK],  
and close the other software. Even if a software window is closed, it is still running if it remains in the  
taskbar, so be sure to quit any unneeded software shown in the taskbar.  
• Have you specified the audio data output destination for your operating system?  
You must specify the USB Audio as the audio data output destination for your computer.  
• Have you specified the audio data output destination for your playback software?  
For some software, you must set the audio data output destination as USB Audio. For details on this  
setting, refer to the owner’s manual for the software.  
• Have the drivers been installed correctly?  
In order to playback audio data using the MA-1EX, the USB Audio Device driver must be installed. For  
details on installation and settings, refer to “Getting Connected and Installing Drivers English” (p. 6).  
• Are the faders of the Volume Control raised?  
Adjust the volume of each fader as described in “Volume Control setting” (p. 11).  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Sound is interrupted during audio playback  
• Graphic accelerators may cause noise to be heard during audio playback.  
Use the following procedure to set graphic acceleration to “None.”  
1. In the Windows Control Panel, double-click Display to open the Display Properties dialog box, and  
click the Settings tab.  
2. Click Advanced to open properties, and click the Performance tab.  
3. In the Graphics section, set the Hardware acceleration slider to None, and then click [OK].  
4. In the Display Properties dialog box, click [OK] to close the dialog box.  
5. Then restart your computer.  
• The sound may be interrupted if a LAN is operating.  
Try disabling the LAN in the Device Manager. If this solved the  
problem of sound being interrupted, you may be able to solve the problem of  
interrupted sound by updating the driver or BIOS.  
• Are many software running on your computer?  
If you use numerous software during playback, or start up another software, the playback may be  
interrupted depending on your computer system. Exit all unneeded software, and try again. If this does  
not resolve the problem, try restarting your computer.  
• Try making the following changes to the disk drive settings.  
Some computers may not have the following settings.  
1. In the Windows Control Panel, double-click System.  
2. Click the Device Manager tab.  
3. Double-click Disk Drives to see the list of devices.  
4. From the list, select GENERIC IDE DISK TYPE??, and click Properties to access the GENERIC IDE  
DISK TYPE?? Properties dialog box.  
*
In the ?? field of GENERIC IDE DISK TYPE??, there will be a number that differs depending on your  
computing environment.  
5. Click the Settings tab, place a check mark in the check box for the DMA option, and click [OK] to close  
the dialog box.  
*
Depending on your system, a dialog box for DMA settings may appear. Verify the contents of the dialog box,  
and click [OK] or [Cancel].  
6. In System Properties dialog box, click [OK] to close the dialog box.  
7. Restart your computer so that the above settings will take effect.  
• Try increasing the memory  
You can increase the processing power of your computer by adding more memory. For details on how to  
install more memory, refer to the operation manual for your computer.  
• Does your computer meet the USB specifications?  
The audio may be interrupted if you are using a computer that does not electrically meet the USB  
specifications. In such cases, you may be able to solve the problem by connecting a USB hub that contains  
a power supply.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
• Make Windows XP/Windows 2000 settings to enable background processing.  
Windows XP users  
1. Click the Windows start button, and from the menu that  
appears, select Control Panel.  
2. In “Pick a category,click “Performance and Maintenance.”  
3. In “or pick a Control Panel icon,click the System icon.  
4. Click the Advanced tab.  
5. At the right of the Performance field, click [Settings]. The  
Performance Options dialog box will appear.  
6. Click the Advanced tab.  
7. In the Processor Scheduling field, select “Background  
services,and click [OK].  
8. In the System Properties dialog box, click [OK].  
The System Properties dialog box will close.  
Windows 2000 users  
1. Click the Windows Start menu, and from the menu that  
appears, select Settings | Control Panel.  
2. In Control Panel, double-click the System icon.  
3. Click the Advanced tab.  
4. Click [Performance Options].  
The Performance Options dialog box will appear.  
5. Choose “Background services” and click [OK].  
6. Click [OK] to close the System Properties dialog box.  
The System Properties dialog box will close.  
• In Macintosh, check the Energy Saver settings.  
In the Mac OS X System Setup, set Energy Saver as follows.  
Click the Sleep tab.  
Set “Put the computer to sleep when it is inactive for:” to Never.  
Set “Put the display to sleep when the computer is inactive for:” to  
Never.  
Click the Options tab.  
If there is a Processor Performance setting, set it to Highest.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
• In Windows, Power Management settings in the Control Panel may cause clicks or pops to occur in  
the audio playback.  
The power management properties that appear when you double-click Power Management will differ  
depending on your computer system. The explanation that follows is for a typical situation, but you  
should refer to the owner’s manual for your computer to verify these settings.  
Some computers may not have the following items.  
1. In the Windows Control Panel, double-click the System icon. The System Properties dialog box  
will appear.  
2. Click the Hardware tab.  
3. Click Device Manager to see the list of devices.  
4. From the list, choose Advanced Power Management Support, and click Properties.  
The Advanced Power Management Support Properties dialog box will appear.  
5. Click the Settings tab, and in Troubleshooting, check the “Don’t Poll Power Supply Status” check  
box. Then click [OK].  
6. In the System Properties dialog box, click [OK].  
7. Restart Windows.  
• Could two or more audio devices be connected to your computer?  
Try connecting only one MA-1EX to your computer. Check whether the noise disappears when only the  
MA-1EX is connected to the computer. Connecting numerous audio devices to a computer may produce  
noise in some situations. If this occurs, connect only the MA-1EX to your computer.  
• Are you using a USB device in addition to the MA-1EX?  
Try switching off USB devices other than the MA-1EX.  
If you have connected the MA-1EX to an external USB hard disk, please connect the MA-1EX directly to a  
USB connector on the computer itself.  
• Depending on the virtual memory setting or network-related settings, noise may occur.  
Please make the following settings before use.  
[Mac OS 9] In Chooser of the Apple menu, set AppleTalk to “Inactive.”  
(This setting is not changed as a result of turning off AppleTalk, as requested by OMS when sequencer  
software is started up. You must change the setting yourself using the “Chooser.”)  
[Mac OS 9] In the “Memory” Control Panel, set Virtual Memory to “Off.”  
settings.  
If you connect to the Internet via a LAN cable  
Use while the LAN cable is connected.  
If you connect to the Internet via the internal modem port, or are not connected to the Internet  
In the “TCP/IP” Control Panel, set “Connect via” to “PPP.”  
After you have made the settings, restart your Macintosh.  
*
Do not use software that accesses the network (such as a Web browser) at the same time that you are using  
sequencer software or audio editing software.  
Game background music does not sound  
Is the Background Music for the Game on an Audio CD?  
If the game uses an audio CD for background music, refer to “When playing audio CDs from the  
computer’s internal CD-ROM drive, or using the MA-1EX to play game music” (p. 12).  
The volume changed when you resumed from Suspend or  
Hibernation status  
When Windows 2000 resumes from Suspend or Hibernation, the output volume setting is changed  
due to a problem of Windows.  
Start up the Mixer application as described in “Volume Control setting” (p. 11), and adjust the USB  
Audio (Speaker) slider.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Deleting the USB Audio Device driver  
If re-installing the USB Audio Device driver  
If installation of the USB Audio Device driver was terminated before completion  
Use the following procedure to delete the driver that is already installed.  
Depending on your computer, some of the folder names may be different.  
1. Use the USB cable to connect the MA-1EX to your computer.  
2. Delete the USB Audio Device driver. Click the Windows Start button, and select Settings - Control  
Panel.  
3. In Control Panel, double-click System to open the “System Properties” dialog box.  
4. Click the Device Manager tab.  
5. Double-click Sound, video and game controllers to see a list of the devices.  
6. From the list, select USB Audio Device, and click  
(Windows 98: Remove). In the Confirm Device  
Removal dialog box, click [OK]. If USB Audio Device is not displayed, proceed to step 8.  
*
If a dialog box suggesting that you restart Windows appears at this point, follow the suggestion and restart your  
computer.  
7. Make sure that USB Audio Device is not in the Sound, video and game controllers list, and click  
[Close] to close the System Properties dialog box.  
8. Follow the steps 1–4 again, and double-click Universal Serial Bus controllers to display the list of  
devices.  
If  
is displayed for the USB compatible device icon:  
Select the [USB Composite Device] icon, and click  
(Windows 98: Remove). In the Confirm  
Device Removal dialog box, click [OK]. As in the step 7, close System Properties.  
If there is no USB compatible device icon, or if  
is not displayed:  
Simply close System Properties.  
If you are using Windows Me and  
is displayed:  
Simply close System Properties.  
9. Disconnect the USB cable from your computer, and restart Windows.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
MA-1EX: USB Stereo Speaker  
Dimensions  
Rated Power Output  
R channel  
• 1.5 W (0.75 W + 0.75 W)  
• 88 (W) x 53.5 (D) x 130 (H) mm  
• 3-1/2 (W) x 2-1/8 (D) x 5-1/8 (H)  
inches  
Speaker Units  
• 60 mm  
• 2-3/8 inches (Magnetically-Shielded)  
L channel  
Frequency Range  
• 88 (W) x 57.5 (D) x 130 (H) mm  
• 100 Hz to 20 kHz  
• 3-1/2 (W) x 2-5/16 (D) x 5-1/8 (H)  
inches  
Controller  
Weight  
• VOLUME Knob (with Power Switch)  
• 500 g / 1 lb 2 oz  
Indicator  
Accessories  
• USB Indicator  
• Owner’s Manual  
Connectors  
* In the interest of product improvement, the  
specifications and/or appearance of this unit are  
subject to change without prior notice.  
R channel  
• USB Connector  
• PHONES Jack (Stereo 1/4" phone  
type)  
• DIGITAL OUT Connector (48 kHz, 16  
bit)  
Optical type (confirms to S/P DIF  
consumer format)  
• CONNECT TO LEFT Jack  
L channel  
• CONNECT TO RIGHT Plug  
Enclosure  
• Full-range Bass-reflex type  
Power Supply  
• USB Bus Power  
Current Draw  
• 500 mA  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
For EU Countries  
For the USA  
This product complies with the requirements of European Directive 89/336/EEC.  
FEDERAL COMMUNICATIONS COMMISSION  
RADIO FREQUENCY INTERFERENCE STATEMENT  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that may cause undesired operation.  
Unauthorized changes or modification to this system can void the users authority to operate this equipment.  
This equipment requires shielded interface cables in order to meet FCC class B Limit.  
For Canada  
NOTICE  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.  
AVIS  
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.  
For the USA  
DECLARATION OF CONFORMITY  
Compliance Information Statement  
Model Name :  
Type of Equipment :  
Responsible Party :  
Address :  
MA-1EX  
USB Stereo Speaker  
Roland Corporation U.S.  
5100 S. Eastern AvenueLos Angeles, CA 90040-2938  
(323) 890 3700  
Telephone :  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
When you need repair service, call your nearest EDIROL/Roland Service Center or authorized  
EDIROL/Roland distributor in your country as shown below.  
IRELAND  
HONG KONG  
BARBADOS  
PERU  
CYPRUS  
Roland Ireland  
Parsons Music Ltd.  
A&B Music Supplies LTD  
12 Webster Industrial Park  
Wildey, St.Michael, Barbados  
TEL: (246)430-1100  
Audionet  
Radex Sound Equipment Ltd.  
17, Diagorou Street, Nicosia,  
CYPRUS  
G2 Calmount Park, Calmount  
Avenue, Dublin 12  
Republic of IRELAND  
TEL: (01) 4294444  
8th Floor, Railway Plaza, 39  
Chatham Road South, T.S.T,  
Kowloon, HONG KONG  
TEL: 2333 1863  
Distribuciones Musicales SAC  
Juan Fanning 530  
Miraflores  
Lima - Peru  
TEL: (511) 4461388  
EUROPE  
EDIROL (Europe) Ltd.  
Studio 3.4 114 Power Road  
London W4 5PY  
TEL: (022) 66-9426  
IRAN  
MOCO INC.  
No.41 Nike St., Dr.Shariyati Ave.,  
Roberoye Cerahe Mirdamad  
Tehran, IRAN  
BRAZIL  
Roland Brasil Ltda.  
Rua San Jose, 780 Sala B  
Parque Industrial San Jose  
Cotia - Sao Paulo - SP, BRAZIL  
TEL: (011) 4615 5666  
ITALY  
Roland Italy S. p. A.  
Viale delle Industrie 8,  
20020 Arese, Milano, ITALY  
TEL: (02) 937-78300  
U. K.  
INDIA  
Rivera Digitec (India) Pvt. Ltd.  
409, Nirman Kendra  
Mahalaxmi Flats Compound  
Off. Dr. Edwin Moses Road,  
Mumbai-400011, INDIA  
TEL: (022) 2493 9051  
TEL: +44 (0)20 8747 5949  
FAX:+44 (0)20 8747 5948  
TRINIDAD  
AMR Ltd  
Ground Floor  
Maritime Plaza  
Barataria Trinidad W.I.  
TEL: (868)638 6385  
TEL: (021) 285-4169  
Deutschland  
TEL: 0700 33 47 65 20  
France  
TEL: 0810 000 371  
Italia  
TEL: 02 93778329  
ISRAEL  
Halilit P. Greenspoon & Sons  
Ltd.  
8 Retzif Ha’aliya Hashnya St.  
Tel-Aviv-Yafo ISRAEL  
TEL: (03) 6823666  
NORWAY  
Roland Scandinavia Avd.  
Kontor Norge  
Lilleakerveien 2 Postboks 95  
Lilleaker N-0216 Oslo  
NORWAY  
CHILE  
Comercial Fancy II S.A.  
Rut.: 96.919.420-1  
Nataniel Cox #739, 4th Floor  
Santiago - Centro, CHILE  
TEL: (02) 688-9540  
INDONESIA  
PT Citra IntiRama  
J1. Cideng Timur No. 15J-150  
Jakarta Pusat  
INDONESIA  
TEL: (021) 6324170  
URUGUAY  
Todo Musica S.A.  
Francisco Acuna de Figueroa 1771  
C.P.: 11.800  
Montevideo, URUGUAY  
TEL: (02) 924-2335  
TEL: 2273 0074  
JORDAN  
MUSIC HOUSE CO. LTD.  
FREDDY FOR MUSIC  
P. O. Box 922846  
Amman 11192 JORDAN  
TEL: (06) 5692696  
COLOMBIA  
Centro Musical Ltda.  
POLAND  
MX MUSIC SP.Z.O.O.  
UL. Gibraltarska 4.  
PL-03664 Warszawa POLAND  
TEL: (022) 679 44 19  
KOREA  
Cra 43 B No 25 A 41 Bododega 9 VENEZUELA  
Cosmos Corporation  
1461-9, Seocho-Dong,  
Seocho Ku, Seoul, KOREA  
TEL: (02) 3486-8855  
Medellin, Colombia  
TEL: (574)3812529  
Instrumentos Musicales  
Allegro,C.A.  
Av.las industrias edf.Guitar  
import  
#7 zona Industrial de Turumo  
Caracas, Venezuela  
TEL: (212) 244-1122  
NORTH AMERICA  
CURACAO  
Zeelandia Music Center Inc.  
Orionweg 30  
Curacao, Netherland Antilles  
TEL:(305)5926866  
CANADA  
Roland Canada Music Ltd.  
(Head Office)  
5480 Parkwood Way Richmond  
B. C., V6V 2M4 CANADA  
TEL: (604) 270 6626  
KUWAIT  
EASA HUSAIN AL-YOUSIFI  
& SONS CO.  
Abdullah Salem Street,  
Safat, KUWAIT  
TEL: 243-6399  
PORTUGAL  
Roland Iberia, S.L.  
Portugal Office  
Cais das Pedras, 8/9-1 Dto  
4050-465, Porto, PORTUGAL  
TEL: 22 608 00 60  
MALAYSIA/  
SINGAPORE  
Roland Asia Pacific Sdn. Bhd.  
45-1, Block C2, Jalan PJU 1/39,  
Dataran Prima, 47301 Petaling  
Jaya, Selangor, MALAYSIA  
TEL: (03) 7805-3263  
DOMINICAN REPUBLIC  
Instrumentos Fernando Giraldez  
Calle Proyecto Central No.3  
Ens.La Esperilla  
Santo Domingo,  
Dominican Republic  
TEL:(809) 683 0305  
Roland Canada Music Ltd.  
(Toronto Office)  
170 Admiral Boulevard  
Mississauga On L5T 2N6  
CANADA  
EUROPE  
LEBANON  
Chahine S.A.L.  
Gerge Zeidan St., Chahine  
Bldg., Achrafieh, P.O.Box: 16-  
5857  
Beirut, LEBANON  
TEL: (01) 20-1441  
ROMANIA  
FBS LINES  
Piata Libertatii 1,  
535500 Gheorgheni,  
ROMANIA  
AUSTRIA  
PHILIPPINES  
Roland Elektronische  
Musikinstrumente HmbH.  
G.A. Yupangco & Co. Inc.  
339 Gil J. Puyat Avenue  
Makati, Metro Manila 1200,  
PHILIPPINES  
TEL: (905) 362 9707  
TEL: (266) 364 609  
Austrian Office  
ECUADOR  
Mas Musika  
Rumichaca 822 y Zaruma  
Guayaquil - Ecuador  
Eduard-Bodem-Gasse 8,  
A-6020 Innsbruck, AUSTRIA  
TEL: (0512) 26 44 260  
U. S. A.  
RUSSIA  
MuTek  
Dorozhnaya ul.3,korp.6  
117 545 Moscow, RUSSIA  
TEL: (095) 981-4967  
Roland Corporation U.S.  
5100 S. Eastern Avenue  
Los Angeles, CA 90040-2938,  
U. S. A.  
TEL: (02) 899 9801  
OMAN  
TALENTZ CENTRE L.L.C.  
Malatan House No.1  
Al Noor Street, Ruwi  
SULTANATE OF OMAN  
TEL: 2478 3443  
TAIWAN  
BELGIUM/FRANCE/  
HOLLAND/  
LUXEMBOURG  
Roland Central Europe N.V.  
Houtstraat 3, B-2260, Oevel  
(Westerlo) BELGIUM  
TEL:(593-4)2302364  
ROLAND TAIWAN  
TEL: (323) 890 3700  
ENTERPRISE CO., LTD.  
Room 5, 9fl. No. 112 Chung  
Shan N.Road Sec.2, Taipei,  
TAIWAN, R.O.C.  
GUATEMALA  
SPAIN  
Roland Iberia, S.L.  
Paseo García Faria, 33-35  
08005 Barcelona SPAIN  
TEL: 93 493 91 00  
Casa Instrumental  
Calzada Roosevelt 34-01,zona 11  
Ciudad de Guatemala  
Guatemala  
QATAR  
Badie Studio & Stores  
P.O. Box 62,  
Doha, QATAR  
TEL: 423554  
AFRICA  
EGYPT  
Al Fanny Trading Office  
9, EBN Hagar A1 Askalany  
Street,  
ARD E1 Golf, Heliopolis,  
Cairo 11341, EGYPT  
TEL: 20-2-417-1828  
TEL: (02) 2561 3339  
TEL: (014) 575811  
TEL:(502) 599-2888  
THAILAND  
Theera Music Co. , Ltd.  
330 Verng NakornKasem, Soi  
2, Bangkok 10100, THAILAND  
TEL: (02) 2248821  
CZECH REP.  
K-AUDIO  
Kardasovska 626.  
CZ-198 00 Praha 9,  
CZECH REP.  
SWEDEN  
Roland Scandinavia A/S  
SWEDISH SALES OFFICE  
Danvik Center 28, 2 tr.  
S-131 30 Nacka SWEDEN  
TEL: (0)8 702 00 20  
HONDURAS  
Almacen Pajaro Azul S.A. de C.V.  
BO.Paz Barahona  
3 Ave.11 Calle S.O  
San Pedro Sula, Honduras  
TEL: (504) 553-2029  
SAUDI ARABIA  
aDawliah Universal  
Electronics APL  
Corniche Road, Aldossary  
Bldg., 1st Floor, Alkhobar,  
SAUDI ARABIA  
VIETNAM  
SAIGON MUSIC  
DISTRIBUTOR  
(TAN DINH MUSIC)  
138 Tran Quang Khai Street  
Dist. 1, Ho Chi Minh City  
VIETNAM  
TEL: (2) 666 10529  
REUNION  
DENMARK  
SWITZERLAND  
Roland (Switzerland) AG  
Landstrasse 5, Postfach,  
CH-4452 Itingen,  
SWITZERLAND  
TEL: (061) 927-8383  
MARTINIQUE  
Musique & Son  
Z.I.Les Mangle  
97232 Le Lamantin  
Martinique F.W.I.  
TEL: 596 596 426860  
Maison FO - YAM Marcel  
25 Rue Jules Hermann,  
Chaudron - BP79 97 491  
Ste Clotilde Cedex,  
Roland Scandinavia A/S  
Nordhavnsvej 7, Postbox 880,  
DK-2100 Copenhagen  
DENMARK  
P.O.Box 2154, Alkhobar 31952  
SAUDI ARABIA  
TEL: (03) 898 2081  
REUNION ISLAND  
TEL: (0262) 218-429  
TEL: (08) 848-4068  
TEL: 3916 6200  
SYRIA  
Technical Light & Sound  
Center  
Rawda, Abdul Qader Jazairi St.  
Bldg. No. 21, P.O.BOX 13520,  
Damascus, SYRIA  
FINLAND  
Roland Scandinavia As, Filial  
Finland  
Elannontie 5  
FIN-01510 Vantaa, FINLAND  
TEL: (0)9 68 24 020  
UKRAINE  
TIC-TAC  
Mira Str. 19/108  
P.O. Box 180  
295400 Munkachevo,  
UKRAINE  
TEL: (03131) 414-40  
SOUTH AFRICA  
Paul Bothner(PTY)Ltd.  
Royal Cape Park, Unit 24  
Londonderry Road, Ottery 7800  
Cape Town, SOUTH AFRICA  
Gigamusic SARL  
10 Rte De La Folie  
97200 Fort De France  
Martinique F.W.I.  
TEL: 596 596 715222  
AUSTRALIA/  
NEW ZEALAND  
TEL: (011) 223-5384  
TEL: (021) 799 4900  
AUSTRALIA/  
MEXICO  
TURKEY  
ZUHAL DIS TICARET A.S.  
Galip Dede Cad. No.37  
Beyoglu - Istanbul / TURKEY  
TEL: (0212) 249 85 10  
GERMANY  
Roland Elektronische  
Musikinstrumente HmbH.  
Oststrasse 96, 22844  
Norderstedt, GERMANY  
TEL: (040) 52 60090  
NEW ZEALAND  
Roland Corporation  
Australia Pty.,Ltd.  
38 Campbell Avenue  
Dee Why West. NSW 2099  
AUSTRALIA  
Casa Veerkamp, s.a. de c.v.  
Av. Toluca No. 323, Col. Olivar  
de los Padres 01780 Mexico  
D.F. MEXICO  
UNITED KINGDOM  
ASIA  
Roland (U.K.) Ltd.  
Atlantic Close, Swansea  
Enterprise Park, SWANSEA  
SA7 9FJ,  
CHINA  
TEL: (55) 5668-6699  
Roland Shanghai Electronics  
Co.,Ltd.  
U.A.E.  
Zak Electronics & Musical  
Instruments Co. L.L.C.  
Zabeel Road, Al Sherooq Bldg.,  
No. 14, Grand Floor, Dubai,  
U.A.E.  
UNITED KINGDOM  
TEL: (01792) 702701  
NICARAGUA  
Bansbach Instrumentos  
Musicales Nicaragua  
Altamira D'Este Calle Principal  
de la Farmacia 5ta.Avenida  
1 Cuadra al Lago.#503  
Managua, Nicaragua  
5F. No.1500 Pingliang Road  
Shanghai 200090, CHINA  
TEL: (021) 5580-0800  
GREECE  
STOLLAS S.A.  
Music Sound Light  
155, New National Road  
Patras 26442, GREECE  
TEL: 2610 435400  
For Australia  
Tel: (02) 9982 8266  
For New Zealand  
Tel: (09) 3098 715  
Roland Shanghai Electronics  
Co.,Ltd.  
(BEIJING OFFICE)  
10F. No.18 3 Section Anhuaxili  
Chaoyang District Beijing  
100011 CHINA  
MIDDLE EAST  
BAHRAIN  
TEL: (04) 3360715  
TEL: (505)277-2557  
CENTRAL/LATIN  
AMERICA  
HUNGARY  
Moon Stores  
Roland East Europe Ltd.  
Warehouse Area ‘DEPO’ Pf.83  
H-2046 Torokbalint,  
HUNGARY  
No.16, Bab Al Bahrain Avenue,  
P.O.Box 247, Manama 304,  
State of BAHRAIN  
TEL: (010) 6426-5050  
ARGENTINA  
Instrumentos Musicales S.A.  
Av.Santa Fe 2055  
TEL: 17 211 005  
Roland Shanghai Electronics  
Co.,Ltd.  
TEL: (23) 511011  
(GUANGZHOU OFFICE)  
2/F., No.30 Si You Nan Er Jie  
Yi Xiang, Wu Yang Xin Cheng,  
Guangzhou 510600, CHINA  
TEL: (020) 8736-0428  
(1123) Buenos Aires  
ARGENTINA  
TEL: (011) 4508-2700  
As of December 1, 2005 (EDIROL-1)  
03909612  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2J  

Extron electronic Network Card PIP 444 User Manual
Extron electronic Stereo Receiver MTP 1500RL 15HD A SEQ User Manual
Extron electronic Switch XPA 2002 100V User Manual
Fisher Price Motorized Toy Car T1961 User Manual
Frigidaire Refrigerator FFHS2622 User Manual
FujiFilm Camcorder DV108SA SA1 User Manual
Garland Oven MCO 25L User Manual
GE Monogram Barcode Reader ZBD4700XWW User Manual
Gitzo Camcorder Accessories GT2940L User Manual
Global Upholstery Co Patio Furniture 2050 3 User Manual