E-iSERV Operation Guide
CD/USB Multi-Source Receiver with Bluetooth
wireless technology
We appreciate your purchase of this CD receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Load the downloaded data from the USB memory or CD-R to the unit. For details of
the operation, see 'Importing display data (DISP Data)' in the Owner's Manual.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Steering Remote Control
Importing steering remote data (U.S.A. only)
Steering Remote Control
The vehicle’s factory loaded steering remote becomes inoperable when the CD3200 is installed.
The ECLIPSE website (E-iSERV) provides software that enables steering remote operation even
with the installation of the main unit. Import this software into your CD3200.
How to operate the Steering Remote Control
Download the file for Steering Remote setting from the E-iSERV website, then write
it to USB memory or CD-R.
1
ATTENTION
<When using a USB memory drive>
• Data downloaded from the E-iSERV website should be saved to folders created in the USB
drive as shown below (NOTE: in order for the system to properly recognize and load steering
remote data, the user must create and name their folders as shown in the diagram below).
ECLIPSE
Must be created by user
DATA
Automatically generated filename
File extension
XXXXXXX.ssw
•
Files retrieved from the E-iSERV website are given automatically generated filenames upon download.
• The main unit cannot be in USB music playing mode during this procedure.
<When using a CD-R>
• The main unit can only import files located in the root directory of the CD-R.
Automatically generated filename
File extension
XXXXXXX.ssw
• Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
* CD-ROMs written in MODE2_FORM2 cannot be read.
• When data is imported from a CD-R, the importing process well take a long time if a lot
of data other than the import data has also been saved to the CD-R.
Download from Www.Somanuals.com. All Manuals Search And Download.
Load the downloaded data from the USB memory or CD-R to the unit. For details
of the operation, see ' Reading steering remote data (U.S.A. only) ' in the Owner's
Manual.
2
ATTENTION
• This function is available only for the vehicles that have steering remote with the voltage
detection type interface.
• For detail of the setting, please contact to ECLIPSE dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
|