ILL
PWR
OPEN
P-953
CD-R/RW/MP3 PLAYER
Sub.
W
9
8
CLAS
POP
JAZZ
Tune
/Seek
/Track
EQ
MONO
T/F
0
AS/PS
MP3
LOC
REG
LOUD
MONO
ST
AF TA
EON
TP PTY
ME/CR
P-953
POWER LEVEL METER
7
ENTER
MUTE
SCAN
LOC
BAND
LOUD
SEL
1
PAU
2
SCN
3
RPT
4
SHF
5
D.DN
6
D.UP
MODE
AM/FM/MPX RADIO WITH FOLD-DOWN
DETACHABLE FRONT PANEL,
COMPACT DISC PLAYER,
AUXILIARY AUDIO INPUT, MP3 CD PLAYBACK,
CD CHANGER CONTROLS,
WIRELESS REMOTE CONTROL
AND QUARTZ CLOCK
OWNER'S
MANUAL
Released 6-14-02
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
19, 27, 31, 32
(BEHIND PANEL)
11, 20, 21, 37, 38
16
34
2
17
33
ILL
PWR
OPEN
P-953
CD-R/RW/MP3 PLAYER
29
28
1
Sub.
W
9
CLAS
POP
JAZZ
Tune
/Seek
/Track
EQ
MONO
13
T/F
0
AS/PS
MP3
LOC
REG
LOUD
MONO
ST
AF TA
EON
TP PTY
ME/CR
8
POWER LEVEL METER
7
ENTER
MUTE
SCAN
LOC
BAND
LOUD
30
SEL
1
PAU
2
SCN
3
RPT
4
SHF
5
D.DN
6
D.UP
MODE
8
10
22 23
39
24
40
25
41
26
36
18
35
9
14 12
3, 4, 5, 6, 7
15
1
POWER ON-OFF/ILLUMINATION (PWR/ILL) BUTTON
used in conjunction with the Select (SEL) button 3to adjust the bass,
treble, balance and fader levels as described in and
Press this button to turn the unit on or off. If the ignition switch is “on”,
the unit will also turn on automatically when a compact disc is inserted,
or if any other switch is pressed.
4
,
5
,
6
7
.
3
PUSH SELECT CONTROL BUTTON (SEL)
This button is used to select the audio function (volume, bass, treble,
balance, or fade) whose setting is adjusted using the AUDIO
CONTROL buttons 2. Pressing the SEL button once will set the
unit for volume adjustment (VOL on the display). Pressing the button
additional times will select bass adjustment (BAS on the display),
When the unit is on, each time the button is momentarily pressed
and released, the VFD display panel back-lighting intensity will
change from low-to-medium-to-high, and then back to low, thereby
providing three different intensity settings. When the unit is turned
off, the time-of-day is continuously displayed.
treble adjustment (TRB on the display), balance (BAL), or fader
(FAD). The display will automatically return to the normal indication
5 seconds after the last adjustment or when another function is
activated.
2
AUDIO CONTROL (
To increase the volume level, press the
/
) BUTTONS
button. The volume will
increase and the level will be shown on the display panel from a
minimum of VOL 00 to a maximum of VOL 100. To decrease the
volume level, press the button. The display will automatically return
to the normal indication 5 seconds after the last volume adjustment
or when another function is activated. These control buttons are also
NOTE:If the BAS or TRB functions are set while the Equalizer
function
revert to the FLAT setting.
cu
is active, the Equalizer function will automatically
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
10R (full right). When the volume level between the left and right
speakers is equal, BAL L=R will be shown on the display panel.
The display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is
activated.
4
BASS CONTROL
To adjust the bass level (Equalizer function inactive), first select the
Bass mode by pressing the SEL button so the BAS indication
appears on the display panel. Within 5 seconds of choosing the
3
Bass mode, press the
the bass response, or the
AUDIO CONTROL
2
button to decrease
AUDIO CONTROL button to increase
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode
by pressing the SEL button so the FAD indication appears on the
display panel. Within 5 seconds of choosing the Fader mode, press
it as desired. The level will be shown on the display panel from a
minimum BAS --10 to a maximum of BAS 10 (BAS 00 indicates
flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
3
the AUDIO CONTROL button
balance to the front speakers or the
2
to adjust the front-rear speaker
AUDIO CONTROL button to
adjust it to the rear speakers. The fader position will be shown on
the display panel from FAD 10R (full rear) to FAD 10F (full front).
To adjust the treble level (Equalizer function inactive), first select When the level between the front and rear speakers is equal,
5
TREBLE CONTROL
the Treble mode by pressing the SEL button
3
so the TRB
FAD F=R will be shown on the display panel. The display will
automatically return to the normal indication 5 seconds after the last
adjustment or when another function is activated.
indication appears on the display panel. Within 5 seconds of
choosing the Treble mode, press the AUDIO CONTROL button
2
to decrease the treble response or the
button to increase it as desired. The level will be shown on the
AUDIO CONTROL
8
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will boost
display panel from a minimum TRB --10 to a maximum of TRB 10
(TRB 00 indicates flat response). The display will automatically return the bass and treble ranges to compensate for the characteristics of
human hearing. Press and hold the BAND/LOUD button for 2
seconds to activate this feature; the unit will beep and LOUD ON will
appear on the display for 5 seconds. Pressing the button again for 2
seconds will deactivate the feature; the unit will beep and LOUD
OFF will appear on the display panel for 5 seconds.
to the normal indication 5 seconds after the last adjustment or when
another function is activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance mode
by pressing the SEL button so the BAL indication appears on
the display panel. Within 5 seconds of choosing the Balance mode,
3
9
AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the volume from the system
(MUTE will appear blinking on the display panel). Pressing the button
again or activating any other button/function will return to the volume
level setting in use before the Mute function was activated. During
press the
AUDIO CONTROL button
2
to adjust the stereo
AUDIO CONTROL
balance to the left channel speakers or the
button to adjust it to the right channel speakers. The balance position
will be shown on the display panel from BAL 10L (full left) to BAL
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
disc play, pressing this button will mute disc audio and disc play will
be paused. During this time, the indication will remain on the
display panel to show that a disc is still loaded in the unit.
bo
FM MONO/STEREO BUTTON (MONO)
During FM radio operation, this button is used to select mono or
stereo reception of the broadcast signal. Under normal reception
conditions, the unit should be left in the stereo mode as indicated by
the ST indication on the display panel when tuned to an FM stereo
signal. If the stereo signal is too noisy for comfortable listening, press
the MONO button to switch to mono reception (the ST indication will
disappear from the display panel, and MONO will be displayed). To
return to stereo reception mode, press the button again so that the
ST indication reappears in the display.
bl
AM/FM BAND SELECTOR (BAND)
Each time the BAND/LOUD button is pressed momentarily, the radio
band is changed. The indication AM, F1, F2 or F3 will appear on the
display panel according to your selection.
bm
UP/DOWN TUNE/SEEK/TRACK (
To manually select a radio station, momentarily press the Up Tuning
) button to advance the unit higher, or the Down Tuning (
/
) BUTTONS
(
)
bp
LOCAL STATION SCAN (SCAN) BUTTON
button to tune lower within the selected band. The radio will
automatically tune to the next strong station and stop on this
frequency. If the LOCAL mode is in effect, the radio will seek the
next local station and stop at that frequency.
Pressing either button for longer than 2 seconds will cause MANUAL
to appear on the display, accompanied by a beep tone, thereby
entering the seek mode. Pressing a button in this mode will cause
the radio to rapidly tune in the up or down direction and stop when
the button is released. The radio will then remain at that frequency.
Five seconds after Manual tune is inactive, AUTO will momentarily
appear for 2 seconds, thereby reverting to the normal tuning mode.
Press this button momentarily to commence an scan of the nearby
local stations whose signal strengths are the strongest (the station
number will appear flashing on the display panel during station
search). Press the button again momentarily to stop the Scan
operation and remain on the current local frequency. To return to
one of the frequencies preset into the current band, press the desired
pre-set button.
bq
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the following
procedure:
bn
LOCAL (LOC) BUTTON
1. Turn the radio on and select the desired band.
This feature is used to select the strength of the signals at which the
radio will stop during Automatic Seek Tuning. Pressing and this
button will select the Local setting (LOCAL will appear on the display
panel) and only strong (local) stations will be received. Pressing the
button again will select the normal Distant setting (LOCAL will
disappear from the display panel, and Dx will be displayed instead)
and the radio will stop at a wider range of signals, including weaker
(more distant) stations.
Automatic SEEK Controls
2. Select the first station to bebpmre-set using the Manual TUNE or
.
3. Press the pre-set button to be set and continue to hold it in
for approximately 2 seconds. The preset number will appear
on the display panel and a beep will sound, indicating that the
station is now set into that preset memory position. The station
can now be recalled at any time by pressing that button.
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Repeat the above procedure for the remaining 5 pre-sets on
that band and for the other 3 bands on the unit.
CAUTION: This unit is designed for play of standard 5" (12cm)
compact discs ONLY. Do not attempt to use 3" (8cm)
CD-Singles in this unit, either with or without an adapter,
as damage to the player and/or disc can occur. Such
damage will not be covered by the Warranty on this
product.
br
VACUUM FLUORESCENT DISPLAY (VFD)
The Vacuum Fluorescent Display (VFD) panel displays the frequency,
as selected by the PWR/ILL button
time, and activated functions using 1one of three illumination levels
.
cl
TRACK SELECT (
The Track Select function of the TUNE/SEEK/TRACK buttons are
used to quickly access the beginning of a particular track when a
/
)
bs
POWER LEVEL METER DISPLAY
This display consists of a left and right six-bar graph which provides
a visual representation of the audio signal level. As the signal
increases, the number of illuminated segments will increase and vice-
versa.
disc is in play. Each time the Forward TRACK Select (
the button is pressed, the next higher track number will be selected
as shown on the display panel. Similarly, each time the Backward
) side of
TRACK Select (
track number will be selected as shown on the display panel.
) side of the button is pressed, the next lower
bt
MODE SELECTOR (MODE)
This button is used to select the radio, CD player, auxiliary (AUX)
input or CD changer (if installed) playback mode. Each press of the
button will select a different mode as indicated on the display panel.
cm
CUE/REVIEW FUNCTIONS (
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the Cue (
/
)
During CD player operation, this button may be used to change to
radio, CD player, AUX input (MP3 or external CD player) or CD
changer mode without ejecting the disc. The DISC indication will
remain on the display panel to show that the CD changer is operating.
Press the button again to return to return to the desired mode.
)
side of the button to advance rapidly in the forward direction (the
advancing disc playing time will be shown on the display panel, except
for discs formatted with MP3 audio), or the Review (
advance rapidly in the backward direction (the decreasing disc playing
time will be shown on the display panel, except for discs formatted
with MP3 audio).
) button to
bu
DISC SLOT
With the front panel in the fold-down position, gently insert the disc
into the slot (label surface facing up) until the soft-loading mechanism
engages and pulls the disc in. The S--CDP indication will appear on
the display panel for 5 seconds. The (
) indication illuminates and
becomes animated, the
symbol lights, and the track number
appears on the display panel.
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
cn
PAUSE (PAU) BUTTON
D.UP button, and to return to a lower number disc, press the D.DN but-
ton. The number of the disc in play will be shown on the display panel.
The Pause function is used to freeze disc play when the CD player
or optional CD changer is in use. S--PAUSE will appear on the display.
Press this button again to resume disc play from the point at which it
was stopped and S--PAUSE will disappear.
cs
DISC EJECT (
)
Disc play is stopped and the disc is ejected when the front panel is
folded down and this button on the rear of the panel is pressed.
Radio or CD changer operation will automatically resume depending on
which mode was in operation prior to disc play. If the disc is not
removed from the unit within 15 seconds of being ejected, it will
automatically be re-loaded into the unit to prevent it from being
co
TRACK SCAN (SCN) SELECT
During disc play, press this button to play the first 10 seconds of
each track on the disc (S--SCN) will appear on the display panel).
When a desired track is reached, press the SCN button again to
cancel the function (S--SCN will disappear from the display panel)
accidentally damaged (
will appear on the display panel to indicate
and play of the selected track will cocnptinue. Scan mode will also be
, or Shuffle Play cq.
that a disc is loaded in the player). Play of the disc can be resumed
canceled by activating Repeat Play
REPEAT PLAY (RPT) SELECT
by using the MODE button
bt
to choose the CD player function.
cp
ct
TIME/FREQUENCY (T/F) DISPLAY BUTTON
During disc play, press this button to repeat the play of the selected
track (S--RPT will appear on the display panel). Play of the track will
continue to repeat until the button is pressed again and the S--RPT
During radio operation, press this button to call the time display on
the incorporated quartz clock. The current time will appear together
with an A or P indication. The display will return to the radio frequency
indication after 5 seconds.
also be canceled by activating the Track Scan
indication disappears from the display panel. Rceopeat Play mode will
or Shuffle Play
cq
During disc play, press this button will call the time display. The
display will return to the disc indication after 5 seconds.
fcuqnctions.
SHUFFLE PLAY (SHF) SELECT
cu
EQUALIZER BUTTON (EQ)
During disc play, press this button to play the tracks on the disc in a random
The EQ button applies preset sound effects to the unit’s audio output
signal. The EQ button, when pressed, will activate one of the following
operating modes: CLASSICS, POPM, JAZZ, DSP OFF or FLAT. Even
though the EQ function is active, as displayed on the panel, if the bass
and/or treble level is set, the EQ function automatically returns to the
FLAT mode. Conversely, when the Equalizer function is not active,
the unit returns to the user set bass and treble levels.
shuffled order (S--SHF will appear on the display panel). In Shuffle Play
mode, the TRACK Select function
order instead of the normal progression. The Shuffle Play mode can be
cl
will also select tracks in the random
from the display panel) or by activating the Repeat Play
functions.
canceled by pressing the button again (S--SHF indicactiopn will disappear
or Track Scan
co
cr
DISC SELECT UP/DOWN (D.UP/D.DN)
These buttons are used to select the desired disc for play during
changer operation. To advance to a higher number disc, press the
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
dl
PRE-SET SCAN (PS) /AUTO-STORE TUNING (AS)
do
FRONT PANEL RELEASE BUTTON (OPEN)
Press this button momentarily to scan the stations pre-set into the
six memories of the current band in use. The unit will stop at each pre-
set station for 5 seconds before continuing to the next pre-set station
(the pre-set number on the display panel will flash during Pre-Set
Scan operation). Press the button again momentarily to stop Pre-
Set Scan operation and remain on the selected frequency.
This button is used to release the mechanism that holds the front
panel to the chassis. To detach the front panel, press the button so
that the panel drops to the lowered position. Grasp the panel at the
middle and pull it off of the chassis. To re-attach the panel, press it
straight onto the chassis until the mechanism locks it into place.
Pressing and holding the button for longer than 2 seconds will activate
theAuto-Store Tuning feature which will automatically scan and enter
up to 6 stations into the pre-set memories of each FM band and the
AM band. If you have already set the pre-set memories to your favorite
stations, activating the Auto-Store Tuning feature will erase those
stations and enter the new ones. This feature is most useful when
traveling in a new area where you are not familiar with the local
stations.
dp
REMOTE SENSOR
The sensor to detect the infrared signal from the wireless remote
control is located behind the VFD display lens. For optimum
operation of the remote control, always aim the control at the VFD
display.
NOTES ON USE OF FRONT PANEL
dm
THEFT-DETERRENT LED
1. Make sure the front panel is positioned correctly when slid-
ing it into the front mounting plate, as it cannot be attached
when up-side down. Use moderate pressure to fully seat
the panel into position.
Located on the chassis behind the front panel, a light-emitting diode
(LED) will flash when the panel is physically removed. The flashing
light serves as a visual warning to the would-be thief that the unit has
been disabled by removal of the front panel.
2. To verify correct panel installation, swing the panel as -
sembly up into position until it locks easily into place. If
any resistance is encountered, re-check panel orienta -
tion in chassis mounting plate.
dn
RESET BUTTON
The RESET button is located to the right of the theft deterrent LED.
The reset circuitry should only be activated under the following
circumstances as it will erase the time and pre-set memories:
3. When taking the front panel with you, please use the sup -
plied carrying case to protect the panel from dirt and
damage. Make sure there is no dust or dirt on the
electrical terminals on the back of the panel as this could
cause intermittent operation or other malfunctions.
1. Upon initial installation after all wiring is completed.
2. If there is a malfunction of any of the switches on the unit,
pressing the RESET button may clear the system and return
to normal operation.
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
THEFT DETERRENT
LED (31)
RESET BUTTON
(32)
NOTES ON USE OF REMOTE INPUT JACK:
DISC SLOT
(19)
The remote input jack provides the user option of applying
an external audio source to the radio.The audio jack is
compatible with most "Walkman" CD and cassette
players, or an MP3 digital audio playback unit. When
the external source is connected, only that media is
played by the radio; no other input sources (radio or CD)
are operative.
MOUNTING PLATE
GUIDE (2 PLACES)
PANEL MOUNT-
ING PLATE
CD EJECT
BUTTON (27)
FRONT PANEL
SETTING THE CLOCK
1. Switch the vehicle ignition and radio “on”.
2. Press the Display (T/F) button to call the time display; then press and hold the button until a beep tone occurs and the time
display flashes.
3. While the display is flashing, press the Up TUNE/SEEK/TRACK (
) button to adjust the hours and A or P indication, or the
Down TUNE/SEEK/TRACK ( ) button to adjust the minutes to the correct time.
4. Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and the display will return to the
normal indication.
CD PLAYER ERROR CODES
If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display
panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control
make sure it is clean, undamaged, and loaded correctly (label surface up). You may also try activating the RESET button
unit, but this will also erase the time and pre-set memories.
of the player. If an error code should appear, try ejecting and reloading the disc into the player. While the disc is out odf nthe unit,
on the
If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
Output Impedance:
Compatible with 4 – 8 ohm
speakers.
SPECIFICATIONS
Low-Level Output:
Tuning Range:
0.7 Volt.
Size:
7" W x 2" H x 6-1/4"D
178 mm x 50 mm x 158 mm
AM: 520 – 1,710 kHz.
(10 kHz. step)
FM: 87.5 – 107.9 MHz.
(200 kHz. step)
Operating Voltage:
Fuse Ratings:
12 volts DC, negative ground
Constant (Yellow wire): 15 AMP.
Switched (Red wire): 0.5 AMP.
Sensitivity:
AM: 20 uV.
FM: 5.0mV.
Output Power:
Output Wiring:
160 watts maximum
(40 watts x 4 channels)
FM Stereo Separation:
25 kHz
CD Frequency Response:
20Hz – 20 kHz. +0/-3dB
Floating-groundtypedesigned
for 4 speaker use.
Front and rear channels CANNOT
be combined (bridged) for use with
2 speakers.
RCA low-level outputs (front and
rear channels).
CD Signal/Noise Ratio:
CD Channel Separation:
CD Dynamic Range:
≥ 60 dB
≥ 50 dB
≥ 60 dB
*Specifications are subject to change without notice.
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER CONTROLS
dt
CUE/REVIEW FUNCTIONS (
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Repeatedly press the Cue
/
)
Built into this radio are controls to operate an optional CD changer.
Please check with your Prestige/Audiovox car stereo specialist
or call 1-800-645-4994 for recommendations of the models that
will work with this radio.
(
) side of the button to advance rapidly in the forward direction
(disc play symbol rotation on the display panel will stop), or the
Review (
direction.
Adjustment of the audio functions (volume, tone, balance, and
fader) for the CD changer operate in the same manner as they
do for radio play. The following controls will operate the CD
changer when it is installed and connected to this radio. Refer to
the owner’s manual included with the CD changer for instructions
on the installation and correct loading and use of the CD
magazine.
) side of the button to advance rapidly in the backward
du
TRACK/DISC SCAN SELECTOR (SCN)
When the SCN button is pressed, the SCN indication will appear
on the display panel, and the first 10 seconds of each track on the
disc will be played in order. When a desired track is reached,
press the SCN button again, and play of the selected track will
continue (SCN) will disappear from the display panel). The Track
Scan mode will also be canceled by activating the Repeat or
Shuffle Play functions.
dq
CD CHANGER MODE SELECTOR (MODE)
During radio or CD play, press this button to select operation of
the CD changer as shown by CDC on the display panel. Disc
play will begin and the disc and track number will be shown on the
display panel. When the magazine is loaded into the changer,
When the SCN button is pressed and held, the DSN
indication will appear on the display panel and the first 10 seconds
of the first track on each disc in the magazine will be played. When
a desired disc is reached, press the SCN button again and play of
the selected disc will continue (DSN will disappear from the display
panel). The Disc Scan mode will also be canceled by activating
the Repeat Play or Shuffle Play functions.
pdlray will begin from the first track of the first disc in the magazine.
DISC SELECT (D.UP/D.DN)
These buttons are used to select the desired disc for play. To
advance to a higher number disc, press the D.UP button. To return
to a lower number disc, press the D.DN button. The number of
tdhse disc in play will be shown on the display panel.
TRACK SELECT (
The Track Select functions are used to quickly access the
beginning of a particular track. Each time the Forward Track Select
/
)
el
DISC/TRACK REPEAT PLAY (RPT)
When the RPT button is pressed, the RPT indication will appear on
the display panel and play of the selected track will be continually
repeated until the Track Repeat mode is canceled by pressing
the RPT button twice, or by activating the Scan or Shuffle Play
functions.
(
) button is pressed, the next higher track number will be
selected as shown on the display panel. Similarly, each time the
Backward Track Select ( ) button is pressed, the next lower
track number will be selected as shown on the display panel.
When the Repeat button is pressed and held, the DRT indication
will appear on the display panel and play of the selected disc
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
will be continually repeated until the Disc Repeat mode is canceled
by pressing the RPT button again or by activating the Scan or
Shuffle Play functions.
When the SHF button is pressed and held, the DSF indication
will appear on the display panel and the discs in the magazine will
be played in a random, shuffled order, as well as the tracks on
each disc. After playing all tracks selected at random from a disc
in the magazine, the unit will select another disc at random and
play all the tracks on it in a random shuffled order. This will continue
from disc-to-disc until the Random Disc mode is canceled by
pressing the SHF button again or by activating the Scan or Repeat
Play functions.
em
DISC/TRACK SHUFFLE PLAY (SHF)
When the SHF button is pressed, the SHF indication will appear
on the display panel and the tracks on the disc will be played in a
random, shuffled order. The Track Select button will also select
tracks in the shuffled order instead of the normal progression.
The Random Track mode can be canceled by pressing the SHF
button or by activating the Scan or Repeat Play functions.
CD CHANGER ERROR CODES
If a problem should develop while operating the CD changer, the following error codes may appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc unloading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of these error situations, try ejecting the CD magazine from the changer and make sure the discs are clean, undamaged,
and loaded correctly (refer to the Owner’s Manual of the CD changer). Re-load the magazine and check for proper operation. You
may also try activating the RESET button
measures do not solve the problem, contact an approved warranty station near you for further assistance.
dn
on the unit, but this will also erase the time and pre-set memories. If the suggested
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
CD TRACK SELECT – See Main Unit
press
lect a lower track number.
cl
and
ds
except
to se-
WIRELESS REMOTE CONTROL
OPERATION
to select a higher track number, press
The wireless remote control supplied with this model is capable of
operating most of the features of the unit from a remote location.
Each button on the remote control functions in the same way as
CD CUE/REVIEW – See Main Unit
cm
and
dt
except press
for Cue function, and press
for Review function.
the remote control, always aim it toward the Remote Sensor
on the front panel of the main unit.
the referenced button on the main unit. For optimal operationdopf
7
8
9
bl
bm
RADIO PRE-SET MEMORY 1-6 - See Main Unit
DISC UP SELECT (D.UP) - See Main Unit
DISC DOWN SELECT (D.DN) - See Main Unit
TRACK/DISC REPEAT (RPT) - See Main Unit and
TRACK/DISC SHUFFLE (SHF) - See Main Unit and
bq
cr
1
POWER - See Main Unit
1
cr
el
em
2 5
VOLUME (LEVEL) CONTROL- See Main Unit
2
,
3 4,
cp
cq
,
6, and
7
except press VOL + to increase level, and
press VOL - to decrease level
3
SELECT BUTTON (S) - See Main Unit
3
,
4
,
5
,
6, and 7 bn TRACK/DISC PAUSE (PAU) - See Main Unit cn
4
PRE-SET SCAN-AUTO STORE TUNING- See Main Unit
dl bo
TRACK/DISC SCAN (SCN) - See Main Unit
co
and
and
TIME/FREQUENCY SELECT BUTTON (T/F)/0- See Main
du
bp
bq
MODE SELECTOR (MODE/7) - See Main Unit
bt
dq
5 bAlM/FM BAND SELECTOR (BAND/ENTER) – See Main Unit
6
UP/DOWN TUNE/SEEK/TRACK (9/8) – See Main Unitbm
MANUAL SEEK TUNING – See Main Unit bm, except press
Unit
ct
br
bs
INFRARED SENDER - Emits infrared signal to radio which
is detected by the sensor
dp
to seek upward and press
to seek downward.
BATTERY COMPARTMENT - Holds two AAA batteries for
remote wireless control operation.
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING MP3 MUSIC FILES
16
MP3 (Moving Picture Experts Group, Layer 3) are digital audio files that
are compressed to about 1/10th the size of a CD recording. As a result,
you can compress a CD song that has 50 megabytes of data into an
MP3 that has only 4 or 5 megabytes.
14
1
7
The P-953 can play MP3s directly from files contained on a CD-R/RW,
by using the MP3 buttons on the radio (or Remote Control).
MODE
OWER
15
5
0
E
N
T
E
3
2
SEL
S
R
MP3 CONTROLS
The following buttons represent control inputs, characters and/or num-
bers dedicated to the access of files on your MP3 CD.
T/F
B
A
N
D
9
6
1. AS/PS: The AS/PS button, also labeled MP3, is used to search
and/or access the Track Number and Directory/Album title; addi-
tional presses will momentarily access the disc serial number
(if applicable), and display the current Directory/Album title. By
using this button, you can quickly jump to a Directory/Album and
then navigate within that area to locate and play a specific
song/track.
2. BAND/LOUD: The BAND/LOUD button is also labeled ENTER
for MP3 CD playback purposes; its function permits entry to the
desired Directory/Album or Track after being accessed by the MP3
(AS/PS) button.
3. Preset 1: During MP3 disc play, pressing this button in conjunc-
tion with the MP3 button, will select track number 1, or a track
number containing this numeral. When a Directory or song title
search is being made, this button also represents alphanumerical
characters A, B, C, 1. Pressing the button consecutively scrolls
through the characters.
MP3
13
4
8
10
7
PAU
SCN
RPT
12
1
2
3
SHF
CD-
CD+
11
9
4
5
6
8
INFRARED REMOTE
CONTROLLER
4. Preset 2: This button functions in the same manner as Preset 1,
except it represents alphanumeric characters D, E, F, 2.
5. Preset 3: This button functions in the same manner as Preset 1,
except it represents alphanumeric characters G, H, I, 3.
17 (FAR SIDE)
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
14
13
11
1
ILL
PWR
OPEN
P-953
CD-R/RW/MP3 PLAYER
Sub.
W
9
8
CLAS
POP
JAZZ
Tune
/Seek
/Track
EQ
MONO
T/F
0
AS/PS
MP3
LOC
REG
LOUD
MONO
ST
AF TA
EON
TP PTY
ME/CR
POWER LEVEL METER
7
ENTER
MUTE
SCAN
LOC
BAND
LOUD
SEL
1
PAU
2
SCN
3
RPT
4
SHF
5
D.DN
6
D.UP
MODE
10
3
12
6
8
9
5
7
2
4
6. Preset 4: This button functions in the same manner as Preset 1,
except it represents alphanumeric characters J, K, L, 4.
7. Preset 5: This button functions in the same manner as Preset 1,
except it represents alphanumeric characters M, N, O, 5.
8. Preset 6: This button functions in the same manner as Preset 1,
except it represents alphanumeric characters P, Q, R, 6.
9. MODE: This button functions in the same manner as Preset 1,
except it represents alphanumeric characters S, T, U, 7.
10. MANU/SKIP (Down): This button functions in the same manner
as Preset 1, except it represents alphanumeric characters
V, W, X, 8.
14. AUDIO CONTROL Up/Down: The AUDIO CONTROL buttons per-
form the same function as the other alphanumeric buttons when
choosing a specific Directory/Album and/or song title; it allows quick
selection and entry of sequential Alphanumeric characters when
used in conjunction with the SEL button which confirms each se
lected character before moving on to the next one.
NOTE: The D.DN (Preset 5) and D.UP (Preset 6) buttons also
enable track selection in 10-track steps during normal CD
play and when searching for files or directories.
11. MANU/SKIP (Up): This button functions in the same manner as
Preset 1, except it represents alphanumeric characters
Y, Z, Space, 9.
LOADING AN MP3 DISC
As with a normal music CD, when an MP3 disc is initially loaded, S--
12. Select (SEL): This button is used in conjunction with the MP3
button and AUDIO CONTROL knob to confirm selection of the
alphanumeric character when choosing a specific Directory/
Album and/or song title.
13. Time/Frequency (T/F): This button functions in the same man-
ner as Preset 1, except it represents symbol/numeric characters
_, -, +, 0.
CDP appears on the display for 5 seconds. The (
) indication illumi-
nates and becomes animated, the symbol lights; then MP3 T and
the track number momentarily appear, followed by the ID Tag, if sup-
ported, and READING on the display.
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Then continue the search within the directory for the song title by
using the buttons, but use the button first.
5. When the title is accessed, press the ENTER button again to
begin play of the selected song.
ACCESSING THE ID TAG
To access the ID tag, when supported, proceed as follows:
1. Press the MP3 (AS/PS) button until the ID Tag, if supported, is
displayed.
/
NOTE: The ID TAG can specify the Songname, Artist, Album,
Year, and/or Comments.
NAVIGATING FROM A ROOT DIRECTORY
To search for a desired song from a root directory on the MP3 CD, pro-
ceed as follows:
1. With the MP3 CD in play mode, press the MP3 button until the root
name is displayed for a secondand the first directory or file name
is displayed (selected).
2. If the selected name is in the directory, go into the selected direc
tory by pressing the ENTER (BAND/LOUD) button.
3. Then continue the search within the directory for the song title by
2. If no ID TAG is available, --NO ID3 will appear on the display follow
ing Comments.
SEARCHING THE TRACK DIRECTLY
To search for a desired track directly, proceed as follows:
1. With the MP3 CD in the play mode, press the MP3 (AS/PS) button;
MP3 T appears on the display followed by a flashing character
position ( ); then press the direct numeric key or combination
thereof, to access the appropriate track.
2. If the desired track number consists of two digits or less, the player
will wait a few seconds for the ENTER (BAND/LOUD) button to be
pressed; otherwise, the player will begin searching for the track
automatically.
using the
/
buttons, but use the
button first.
4. When the song title is accessed, press ENTER again to begin
play of the selected song.
NAVIGATING FROM A CURRENT DIRECTORY
To search for a desired song from the current directory on the MP3 CD,
proceed as follows:
1. With the MP3 CD in play mode, press the MP3 button until the root
name is displayed for a second and the currently playing file name
is displayed (selected).
2. If the displayed name is the desired directory or the file in the direc
tory, go into the selected directory and play the file by pressing the
ENTER (BAND/LOUD) button.
3. When the track is accessed, the track number appears on the dis-
play, followed by the song name.
SEARCHING FOR A DIRECTORY OR FILE
To search for a desired directory or file on the MP3 CD, proceed as
follows:
1. With the MP3 CD in play mode, press the MP3 button until only a
blinking character position ( ) appears.
3. Otherwise, continue the search within the directory for the song title
2. Then press the desired buttons, or use the AUDIO ADJUST control
with the SEL button, to enter characters of the directory or file name.
Up to 8 alpnanumeric characters can be entered for search.
3. Press the ENTER (BAND/LOUD) button to access the directory.
by using the
/
buttons, but use the
button first.
4. When the song title is accessed, press ENTER again to begin
play of the selected song.
NOTE: If the Directory/File is entered incorrectly, or does not exist,
NOT FOUND will be displayed momentarily.
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ON DISCS:
Attempting to use non-standard shape discs (e.g.; square, start, heart) may damage the unit. Be sure to use round-shape CDs
only in this unit.
NOTES ON CD-Rs (Recordable CDs)/CD-RWs (Rewriteable CDs):
1. Be sure to use discs with the following marks only for play in this unit:
2. The unit cannot play a CD-R or CD-RW that is not finalized. (Please refer to the manual of your CD-R/CD-RW
software for more information on the finalization process.)
3. Depending on the recording status, conditions of the disc and the equipment used for the recording, some
CD-Rs/CD-RWs may not be played on this unit.
NOTES ON MULTI-SESSION DISCS:
1. If the first track of the first session is audio CD data, then the unit will play only the audio CD data.
2. When the first track of the first session in not audio CD data, but and MP3 file is included on the disc, then only the MP3
files will be played back and other data (including CD data) is skipped.
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
! When the vehicle warms up during cold weather or under damp
conditions, moisture may condense on the lens of the disc
player.Shouldthisoccur,theplayerwillnotoperateproperlyuntil
the moisture has evaporated.
CARE AND MAINTENANCE
Theradiosectionof your new sound systemdoesnot requireany
maintenance. We recommend you keep this manual for reference
on the many features found in this unit as well as how to set the
clock.
! TheunitisdesignedwithavibrationdampeningCDmechanismto
minimize interruption of disc play due to normal vibration in a
moving vehicle. When driving on very rough roads,
however,occasionalsoundskipsmayoccur.Thiswillnotscratch
or damage the disc and normal play will resume when the rough
conditions cease.
The compact disc player section also requires no routine mainte-
nance, but proper understanding of its use and handling will help
you obtain maximum enjoyment of its capabilities. The following
points should be observed:
! When cleaning the interior of the vehicle, do not get water or
cleaning fluids on the unit.
HANDLING COMPACT DISCS
Dirt,dust,scratches,andwarpagecancauseskipsintheplayback
and deterioration of sound quality. Please follow these guidelines
to take care of your compact discs:
! The CD player is a precision instrument and will not operate
properly in extreme hot or cold. In case of such conditions, wait
until the interior temperature of the vehicle reaches a normal
temperature before using the player.
! If the temperature inside the player gets too hot, a protective
circuit will automatically stop play of the disc. In this case, allow
the unit to cool off before operating the player again.
! Use only compact discs with the mark
.
! Fingerprints, dust, and dirt should be carefully wiped off the
disc’s playing surface (shiny side) with a soft cloth. Wipe in a
straight motion from the inside to the outside of the disc.
! Never use chemicals such as record sprays, household cleaners
or thinner to clean compact discs. Such chemicals can
irreparably damage the disc’s surface.
! Never insert anything other than a 5" (12 cm) compact disc into
the player as the mechanism can be damaged by foreign
objects.
! Donotattempttouse3"(8cm)CD-Singlediscsinthisunit,either
with or without an adaptor, as damage to the player and/or disc
mayoccur. SuchdamagewillnotbecoveredbytheWarrantyon
this product.
! When not using the disc player, always remove the compact
disc.
! Discs should be kept in their storage cases when not in use.
! Donotexposediscstodirectsunlight,hightemperaturesorhigh
humidity for extended periods.
! Do not stick paper, tape, or labels on the disc surfaces nor write
on them with any type of marker.
-18-
Download from Www.Somanuals.com. All Manuals Search And Download.
12 / 24 MONTH LIMITED WARRANTY
Applies to automotive radios, radio/tape players, radio/CD players, CD changers,
power amplifiers, equalizers and accessories.
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,
under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such
defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill
of sale), specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below.
The warranty period will be extended to 24 months from the date of original purchase if the product is installed by an authorized Prestige Audio
dealer. Toclaimwarrantyserviceduringthisextendedperiod, thebillofsalemustspecifythattheproductwasinstalledby anauthorizedPrestige
Audio dealer.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred
for installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electrical
systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code
label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF
30 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
U.S.A. : AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 ! 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-5543
-19-
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2002 AUDIOVOX ELECTRONICS CORP., HAUPPAUGE, NY
Printed in China
128-6356
-20-
Download from Www.Somanuals.com. All Manuals Search And Download.
|