Echo Blower PB 760 LN H T User Manual

X7722271404 / X772000164  
PB-760 LN H/T  
Power Blower  
Operator’s Manual  
Burn Hazard  
The muffler or catalytic muffler and surrounding cover may become extremely hot.  
Always keep clear of exhaust and muffler area, otherwise serious personal injury may  
occur.  
The engine exhaust from this product contains chemicals known to the State of California to cause  
cancer, birth defects or other reproductive harm.  
Users of this equipment risk injury to themselves and others if the unit is used  
improperly and/or safety precautions are not followed. ECHO provides an operator’s  
manual. It must be read and understood for proper and safe operation. Failure to do so  
could result in serious injury.  
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time  
of publication, but are subject to change without notice. Illustrations may include optional equipment and  
accessories, and may not include all standard equipment.  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PB-760 LN H/T  
INTRODUCTION  
INTRODUCTION  
Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and  
on-the-job dependability. Read and understand this manual. You will find it easy to use and full of helpful  
operating tips and SAFETY messages.  
The Operator’s Manual  
Keep it in a safe place for future reference. Contains specifications and information for safety, operation,  
maintenance, storage and assembly specific to this product.  
SERVICING INFORMATION  
Parts/Serial Number  
Genuine ECHO Parts and ECHO REPOWER™ Parts and  
Assemblies for your ECHO products are available only from an  
Authorized ECHO Dealer. When you do need to buy parts always  
have the Model Number and Serial Number of the unit with you. You  
can find these numbers on the engine housing. For future reference,  
write them in the space provided below.  
Model No. _________________ SN. ___________________  
Service  
Service of this product during the warranty period must be performed by an Authorized ECHO Service  
Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or  
call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your  
unit for Warranty service/repairs, proof of purchase is required.  
Echo Consumer Product Support  
If you require assistance or have questions concerning the application, operation or maintenance of this  
product you may call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:30 am to  
4:30 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial  
number of your unit.  
Warranty Registration  
To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at  
product confirms your warranty coverage and provides a direct link between you and ECHO if we find it  
necessary to contact you.  
Additional or Replacement Manuals  
Replacement Operator, Safety Manuals, and Parts Catalogs are available from your ECHO dealer or at  
(800-673-1558). Always check the ECHO Web Site for updated information.  
Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video.  
X7531125002  
3
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
SAFETY  
PB-760 LN H/T  
SAFETY  
Manual Safety Symbols and Important Information  
Throughout this manual and on the product itself, you will find safety alerts and helpful, informational  
messages preceded by symbols or key words. The following is an explanation of those symbols and key  
words and what they mean to you.  
The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition  
which WILL lead to serious personal injury or death if not avoided.  
The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition  
which CAN lead to serious personal injury or death if not avoided.  
The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition  
which may lead to minor or moderate personal injury if not avoided.  
The enclosed message provides information necessary for the protection of the unit.  
Note: This enclosed message provides tips for use, care and maintenance of the unit.  
CIRCLE AND SLASH SYMBOL  
This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result  
in serious or fatal injury.  
International Symbols  
Symbol  
Description  
Symbol  
Description  
Symbol  
Description  
Symbol  
Description  
Read and  
understand  
owners  
Carburetor  
Adjustment -  
Low speed  
mixture  
Carburetor  
Adjustment -  
High speed  
mixture  
Fuel and oil  
mixture  
manual.  
Wear eye, ear  
and head  
Carburetor  
Adjustment -  
Idle speed  
Finger severing  
Hot Surface  
Safety/Alert  
Idle Speed  
protection  
Emergency  
Stop  
Fast speed  
Primer Bulb  
Wear hand  
protection.  
Use two  
DO NOT smoke  
near fuel  
Ignition  
ON / OFF  
handed  
Choke Control  
“Cold Start”  
Position  
Choke Control  
“Run” Position  
(Choke Open)  
DO NOT allow  
flames or  
sparks near fuel  
Wear slip  
resistant  
footwear  
(Choke  
Closed)  
4
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
PB-760 LN H/T  
SAFETY  
Personal Condition and Safety Equipment  
Users of this product risk injury to themselves and others if the unit is used improperly and/or safety  
precautions are not followed. Proper clothing and safety gear must be worn when operating unit.  
Physical Condition  
Your judgment and physical dexterity may not be good:  
• if you are tired or sick,  
• if you are taking medication,  
• if you have taken alcohol or drugs.  
Operate unit only if you are physically and mentally well.  
Eye Protection  
Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit.  
Hand Protection  
Wear no-slip, heavy duty work gloves to improve your grip on the handles. Gloves also reduce the  
transmission of machine vibration to your hands.  
Breathing Protection  
Wear a facemask to protect against dust.  
Hearing Protection  
ECHO recommends wearing hearing protection whenever unit is used.  
Proper Clothing  
Wear snug fitting, durable clothing;  
• Pants should have long legs, shirts with long sleeves.  
• DO NOT WEAR SHORTS,  
• DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become  
entangled in moving parts or surrounding growth.  
Wear sturdy work shoes with nonskid soles;  
• DO NOT WEAR OPEN TOED SHOES,  
• DO NOT OPERATE UNIT BAREFOOTED.  
Wear no-slip, heavy duty work gloves.  
Keep long hair away from engine and air intake. Retain hair with cap or net.  
Hot Humid Weather  
Heavy protective clothing can increase operator fatigue which may lead to heat stroke. Schedule heavy  
work for early morning or late afternoon hours when temperatures are cooler.  
X7531125002  
5
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SAFETY  
PB-760 LN H/T  
The ignition components of this machine generate an electromagnetic field during operation which  
may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with  
pacemakers should consult with their physician and the pacemaker manufacturer before operating  
this machine. In the absence of such information, ECHO does not recommend the use of ECHO  
products by anyone who has a pacemaker.  
Vibration and Cold  
It is believed that a condition called Raynaud’s Phenomenon,  
which affects the fingers of certain individuals, may be brought  
about by exposure to vibration and cold. Exposure to vibration  
and cold may cause tingling and burning sensations, followed  
by loss of color and numbness in the fingers. The following  
precautions are strongly recommended, because the minimum  
exposure, which might trigger the ailment, is unknown.  
• Keep your body warm, especially the head, neck, feet, ankles,  
hands, and wrists.  
• Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks, and  
also by not smoking.  
• Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held  
power equipment is not required.  
• If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling,  
consult your physician before further exposing yourself to cold and vibration.  
Repetitive Stress Injuries  
It is believed that overusing the muscles and tendons of the  
fingers, hands, arms, and shoulders may cause soreness,  
swelling, numbness, weakness, and extreme pain in those  
areas. Certain repetitive hand activities may put you at a high  
risk for developing a Repetitive Stress Injury (RSI). An extreme  
RSI condition is Carpal Tunnel Syndrome (CTS), which could  
occur when your wrist swells and squeezes a vital nerve that  
runs through the area. Some believe that prolonged exposure to  
vibration may contribute to CTS. CTS can cause severe pain for  
months or even years.  
To reduce the risk of RSI/CTS, do the following:  
• Avoid using your wrist in a bent, extended, or twisted position. Instead try to maintain a straight wrist  
position. Also, when grasping, use your whole hand, not just the thumb and index finger.  
• Take periodic breaks to minimize repetition and rest your hands.  
• Reduce the speed and force with which you do the repetitive movement.  
• Do exercise to strengthen the hand and arm muscles.  
• Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in  
the fingers, hands, wrists, or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve  
and muscle damage can be prevented.  
6
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PB-760 LN H/T  
SAFETY  
Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains  
poisonous emissions and can cause serious injury or death.  
Read the Manual  
• Provide all users of this equipment with the Operator’s Manual for  
instructions on Safe Operation.  
Clear the Work Area  
• Spectators and fellow workers must be warned, and children and  
animals prevented from coming nearer than 15 m (50 ft.) while the  
unit is in use.  
• Take wind conditions into account: avoid open doors and windows.  
• Do not point blower at people or animals.  
• Review area to be cleared. Look for potential hazards such as  
stones or metal objects.  
Keep a Firm Grip  
• Hold the handle in one hand, with thumb and fingers encircling the handle.  
Keep a Solid Stance  
• Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not  
work in odd positions or on ladders. Do not over reach.  
Avoid Hot Surfaces  
• Keep exhaust area clear of flammable debris. Avoid contact  
during and immediately after operation.  
Equipment  
Use only ECHO approved attachments. Serious injury may result from the use of a non-approved  
attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices,  
attachments or accessories which have not been tested and approved by ECHO. Read and comply  
with all safety instructions listed in this manual.  
• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.  
• Do not use blower if any part is missing or damaged.  
• Have repairs done only by an authorized ECHO Service dealer.  
X7531125002  
7
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EMISSION CONTROL (EXHAUST & EVAPORATIVE)  
PB-760 LN H/T  
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects  
away from all openings.  
ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a  
complete stop before removing obstructions, clearing debris, or servicing unit.  
DO NOT start or operate unit unless all guards and protective covers are properly assembled to  
unit.  
NEVER reach into any opening while the engine is running. Moving parts may not be visible  
through openings.  
Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or  
leaks are found, do not use unit, otherwise serious personal injury or property damage may occur.  
Have unit repaired by an authorized servicing dealer before using.  
EMISSION CONTROL (EXHAUST & EVAPORATIVE)  
EPA 2010 and Later and/or C.A.R.B. TIER III  
The emission control system for the engine is EM (engine modification)  
and, if the second to last character of the Engine Family on the Emission  
Control Information label (sample below) is “C”, “K”, or “T”, the emission  
control system is EM and TWC (3-way catalyst). The fuel tank/fuel line  
emission control system is EVAP (evaporative emissions). Evaporative  
emissions for California models are only applicable to fuel tanks.  
An Emission Control Label is located on the engine. (This is an  
EXAMPLE ONLY, information on label varies by engine FAMILY).  
Product Emission Durability (Emission Compliance Period)  
The 50 or 300 hour emission compliance period is the time span  
selected by the manufacturer certifying the engine emissions output  
meets applicable emissions regulations, provided that approved  
maintenance procedures are followed as listed in the Maintenance Section of this manual.  
8
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
PB-760 LN H/T  
DESCRIPTION  
DESCRIPTION  
PB-760 LN H  
Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow  
the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See  
PARTS ORDERING instructions for specific information.  
8
1
9
11  
10  
12  
2
7
6
5
3
13  
15  
4
14  
Hot Decal  
General Warning Decal  
Sound Label  
X7531125002  
9
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DESCRIPTION  
PB-760 LN H/T  
1. SPARK PLUG - Provides spark to ignite fuel mixture.  
2. SAFETY DECAL - Lists important safety precautions.  
3. SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER - The muffler or catalytic muffler controls  
exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the  
muffler. Keep exhaust area clear of flammable debris.  
4. FUEL TANK - Contains fuel and fuel filter.  
5. FUEL TANK CAP - Covers and seals fuel tank.  
6. RECOIL STARTER HANDLE - Pull recoil handle slowly until recoil starter engages, then quickly and  
firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will  
occur.  
7. AIR CLEANER - Contains replaceable air filter element.  
8. CHOKE - Move lever UP to close choke (  
DOWN to open choke ( ) (run position).  
) (starting position) and for emergency stopping. Move  
9. PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from  
the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge  
bulb an additional 4 or 5 times.  
10. SHOULDER HARNESS - Used to support unit on operator's back. The straps are adjustable.  
11. THROTTLE POSITION LEVER/STOP SWITCH - Combination stop switch and variable speed throttle  
lever. When the lever is moved all the way forward the blower is at Wide Open Throttle (W.O.T.). When  
the lever is moved rearward to detent, the blower is at idle. When the lever is moved rearward past the  
idle detent the blower will stop.  
12. HANDLE - Rotates downward for throttle control access. Spring loaded for flexible operation.  
13. STICK HANDLE - Provides comfortable grip for directing air flow.  
14. BLOWER PIPES - Exclusive positive locking system.  
15. FLEXIBLE PIPE - Allows for full range of movement  
10  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PB-760 LN H/T  
DESCRIPTION  
PB-760 LN T  
Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow  
the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See  
PARTS ORDERING instructions for specific information.  
8
1
9
10  
2
7
5
6
12  
11  
16  
3
13  
14  
4
15  
Hot Decal  
General Warning Decal  
Sound Label  
General Warning Decal  
X7531125002  
11  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION  
PB-760 LN H/T  
1. SPARK PLUG - Provides spark to ignite fuel mixture.  
2. SAFETY DECAL - Lists important safety precautions.  
3. SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER - The muffler or catalytic muffler controls  
exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the  
muffler. Keep exhaust area clear of flammable debris.  
4. FUEL TANK - Contains fuel and fuel filter.  
5. FUEL TANK CAP - Covers and seals fuel tank.  
6. RECOIL STARTER HANDLE - Pull recoil handle slowly until recoil starter engages, then quickly and  
firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will  
occur.  
7. AIR CLEANER - Contains replaceable air filter element.  
8. CHOKE - Move lever UP to close choke (  
DOWN to open choke ( ) (run position).  
) (starting position) and for emergency stopping. Move  
9. PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from  
the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge  
bulb an additional 4 or 5 times.  
10. SHOULDER HARNESS - Used to support unit on operator's back. The straps are adjustable.  
11. HANDLE - Used by operator to direct and control air flow.  
12. COMBINATION THROTTLE POSITION / STOP SWITCH BUTTON - Controls engine speed and turns  
ignition on or off. Forward position - STOP. First detent position - IDLE. Move button back to increase  
speed, forward to decrease speed. Use Throttle Position Button to set and hold blower speed for  
continuous operation.  
13. THROTTLE TRIGGER - Spring - loaded Throttle Trigger controls engine speed. Releasing Trigger  
returns engine to speed set by Throttle Position Stop Switch Button. Always release trigger and allow  
engine to return to idle before shutting off with Throttle Position Stop Switch Button. Use Throttle Trigger  
to vary blower speed settings for intermittent operation.  
14. LOCKING KNOB - Allows operator to adjust handle position for optimum comfort and control.  
15. BLOWER PIPES - Exclusive positive locking system.  
16. FLEXIBLE PIPE - Allows for full range of movement.  
12  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PB-760 LN H/T  
CONTENTS  
CONTENTS  
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or  
missing parts. Use the contents list to check for missing parts.  
PB-760 LN H  
____ 1 - Power Head  
____ 1 - Flex Pipe  
____ 1 - Pipe w/swivel  
____ 1 - Straight Pipe w/silencer  
____ 1 - Straight Pipe  
____ 1 - Operator's Manual  
____ 1 - Emission Control Warranty Statement  
____ 1 - Warranty Registration Card  
____ 2 - Clamps w/screws  
____ 1 - Stick Handle  
____ 1 - Bolt 6x25  
____ 1 - Washer 6  
____ 1 - Wing nut  
____ 1 - Intake cover  
____ 1 - Intake cover  
PB-760 LN T  
____ 1 - Power Head  
____ 1 - Flex Pipe  
____ 1 - Pipe w/swivel  
____ 1 - Straight Pipe w/silencer  
____ 1 - Straight Pipe  
____ 1 - Operator's Manual  
____ 1 - Emission Control Warranty Statement  
____ 1 - Warranty Registration Card  
____ 2 - Clamps w/screws  
____ 1 - Guide Loop  
____ 1 - Intake cover  
X7531125002  
13  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ASSEMBLY  
PB-760 LN H/T  
ASSEMBLY  
PB-760 LN H  
Never perform maintenance or assembly procedures with engine running or serious personal injury  
may result.  
A
Install Blower Pipes/Stick Handle  
1. Assemble clamps (A) onto both ends of flexible pipe (B).  
C
B
2. Assemble swivel pipe (C) into flexible pipe (B) and tighten  
clamp (A).  
3. Assemble flexible pipe (B) to elbow (D) on blower and  
tighten clamp (A).  
Note: A light lubricant may be used to ease assembly of flexible  
pipe to blower elbow.  
D
A
B
4. Loosen wing nut (E). Align notches (G) in handle clamp with  
tabs (H).  
F
5. Slide stick handle onto swivel pipe (C). Stick handle (F)  
should be angled away from operator.  
C
H
6. Position stick handle (F) for comfortable operation. Tighten  
wing nut (E).  
E
G
7. Assemble straight pipe w/silencer (J) onto swivel pipe (C),  
until you feel light resistance. Do not force connection. Hold  
swivel pipe and turn straight pipe clockwise, engaging  
positive locking channels, until connection is firm. Do not  
force connection.  
8. Assemble straight pipe (K) to straight pipe w/silencer (J) as  
in step 7.  
J
Note:  
K
Blower use will eventually loosen pipe connections. Exclusive  
positive locking system allows pipes to be tightened. If  
loosening occurs, remove two straight pipes and install  
according to instructions 7 & 8.  
C
14  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PB-760 LN H/T  
ASSEMBLY  
PB-760 LN T  
Never perform maintenance or assembly procedures with engine running or serious personal injury  
may result.  
Install Blower Pipes  
G
G
1. Place guide loop (G) across clamp, and turn until clip fully  
engages clamp band.  
Note: Clamp with cable guide loop (G) fits elbow end of flexible  
pipe (B).  
2. Assemble clamps (A) onto both ends of flexible pipe (B).  
B
C
A
G
3. Assemble swivel pipe (C) into flexible pipe (B) and tighten  
clamp (A).  
A
Note: Hang handle freely from blower to assure throttle cable is  
not twisted before installing handle (E).  
4. Loosen knob (H) on handle (E). Align notch in handle with  
tabs (F). Install onto swivel pipe (C) past long ridges in pipe.  
E
H
C
F
5. Assemble flexible pipe (B) to elbow (D) on blower. Position  
guide loop (G) on outside of flexible pipe (away from blower)  
and tighten clamp (A).  
A
B
D
G
X7531125002  
15  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
PB-760 LN H/T  
Note: A light lubricant may be used to ease assembly of flexible  
pipe to blower elbow.  
G
6. Clip throttle cable into throttle cable guide loop (G).  
E
7. Move handle (E) to desired position. Tighten knob (H) hand  
tight.  
H
8. Assemble straight pipe w/silencer (I) onto swivel pipe (C),  
until you feel light resistance. Do not force connection. Hold  
swivel pipe and turn straight pipe clockwise, engaging  
positive locking channels, until connection is firm. Do not  
force connection.  
E
9. Assemble straight pipe (J) to straight pipe w/silencer (I) as in  
step 8.  
I
Note: Blower use will eventually loosen pipe connections.  
Exclusive positive locking system allows pipes to be  
tightened. If loosening occurs, remove two straight pipes  
and install according to instructions 8 &9.  
J
C
16  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PB-760 LN H/T  
OPERATION  
OPERATION  
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects  
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts  
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.  
Blower housing may contain shredder blades and other sharp edges that can cause serious injuries  
if touched, even if engine is off and blades are not moving. Wear gloves to protect hands from sharp  
edges and hot surfaces.  
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark  
arrestor to prevent discharge of hot particles from the engine. Metal cutters can also create sparks if  
the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or  
regulations regarding fire prevention requirements.  
Fuel  
Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO  
requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels  
may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended  
machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may  
also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.  
Fuel Requirements  
Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may  
contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing  
methanol (wood alcohol) is NOT approved.  
Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards  
must be used. Echo brand premium Power Blend X TM Universal 2-Stroke Oil meets these standards. Engine  
problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and  
J.A.S.O. FD certified oil, such as Echo premium Power Blend X TM, will void the two-stroke engine warranty.  
Echo premium Power Blend X TM Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo  
engines sold in the past regardless of ratio specified in those manuals.  
Handling Fuel  
Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal  
injury may result.  
Use an approved fuel container.  
DO NOT smoke near fuel.  
DO NOT allow flames or sparks near fuel.  
X7531125002  
17  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
OPERATION  
PB-760 LN H/T  
Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to  
equalize.  
NEVER refuel a unit when the engine is HOT or RUNNING!  
DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.  
DO NOT overfill fuel tank. Wipe up spills immediately.  
Securely tighten fuel tank cap and close fuel container after refueling.  
Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is  
repaired.  
Move at least 3m (10 ft.) from refueling location before starting the engine.  
Mixing Instructions  
1. Fill an approved fuel container with half of the required  
amount of gasoline.  
2. Add the proper amount of 2-stroke oil to gasoline.  
3. Close container and shake to mix oil with gasoline.  
4. Add remaining gasoline, close fuel container, and remix.  
Spilled fuel is a leading cause of hydrocarbon emissions. Some  
states may require the use of automatic fuel shut-off containers  
to reduce fuel spillage.  
After use  
• DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage  
container.  
Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area.  
As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building,  
away from sparks and flames.  
Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a  
fuel stabilizer is added.  
Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.  
18  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PB-760 LN H/T  
OPERATION  
Starting Cold Engine  
• Recoil starter: Use short pulls - only 1/2-2/3 of rope length for starting. Do not allow the rope to snap back  
in. Always hold the unit firmly.  
• (PB-760 LN H): Rotate spring loaded throttle arm downward to a comfortable operating position.  
- PB-760 LN H  
PB-760 LN H  
1. Throttle Lever  
A
Move throttle position lever (A) to IDLE DETENT positions.  
- PB-760 LN T  
1. Throttle Position / Stop Switch Button  
PB-760 LN T  
Slide Throttle Position / Stop Switch Button (A) back to idle  
position.  
- PB-760 LN H and T  
C
2. Choke  
Move choke (C) up to Cold Start Position (  
)
3. Purge Bulb  
E
Pump purge bulb (D) until fuel is visible. Pump bulb an  
additional 4 or 5 times.  
4. Recoil Starter  
D
Pull recoil starter handle (E) until engine fires, or a maximum  
of 5 pulls  
5. Choke  
After engine fires (or 5 pulls), move choke lever back to Run (  
) position, then pull starter handle/rope  
until engine starts and runs. Allow unit to warm up at idle for several minutes.  
Note: If engine does not start with choke in “Run” position after 5 pulls, move choke to “Cold Start” (  
position, and repeat steps 4 & 5.  
)
6. Throttle Lever  
Allow engine to warm up for several minutes before use.  
7. Throttle Lever  
After engine warm-up, move throttle lever gradually to increase engine RPM to desired operating speed.  
X7531125002  
19  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
PB-760 LN H/T  
Starting Warm Engine  
The starting procedure is the same as Cold Start except DO  
NOT close the choke.  
PB-760 LN H  
- PB-760 LN H  
A
1. Throttle Lever  
Move throttle position lever (A) to IDLE DETENT positions.  
- PB-760 LN T  
PB-760 LN T  
1. Throttle Position / Stop Switch Button  
Slide Throttle Position / Stop Switch Button (A) back to idle  
position.  
- PB-760 LN H and T  
C
2. Purge Bulb  
Pump purge bulb (D) until fuel is visible. Pump bulb an  
additional 4 or 5 times.  
E
3. Recoil Starter  
Pull recoil starter handle (E) and engine should start. Do not  
use choke (C)  
D
Note: If engine does not start after 5 pulls, use cold start  
procedures.  
PB-760 LN H  
Stopping Engine  
- PB-760 LN H  
A
1. Throttle Lever  
Move throttle lever (A) to IDLE DETENT position and allow  
engine to return to idle before shutting off engine.  
2. Throttle Lever  
PB-760 LN T  
Move throttle lever (A) to "O" (Stop) position.  
- PB-760 LN T  
1. Throttle Position / Stop Switch Button  
Release throttle trigger. Move Throttle Position / Stop Switch Button (A) forward to idle position and allow  
engine to return to idle before shutting off engine.  
2. Throttle Position / Stop Switch Button  
Move Throttle Position / Stop Switch Button (A) all the way forward to STOP position.  
If engine does not stop when stop switch is moved to STOP position, close choke - COLD START  
position - to stall engine. Have your ECHO dealer repair stop switch before using blower again.  
20  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PB-760 LN H/T  
OPERATION  
Operating Blower  
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause  
unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position  
unit so that exhaust is directed away from your face and body.  
Always wear safety glasses, hearing protection and a face filter mask or serious personal injury may  
result. Do not point the blower pipe in the direction of people or pets.  
Use reduced speed only when performing light-duty tasks or to comply with local noise regulations.  
Continuous low speed operation may allow fuel/oil residue to build-up on the piston and cause rapid build-up  
of carbon on the spark arrestor screen, resulting in overheating and engine damage. To reduce harmful  
build-up, run engine at wide open throttle for at least 5 minutes every hour, and inspect/clean the spark  
arrestor screen after approximately 40 hours of operation.  
Read the Safety Section carefully.  
To avoid engine damage due to over-revving, do not block blower pipe.  
1. Use only during appropriate hours.  
2. Allow the engine to warm up at a fast idle for a few minutes.  
3. PB-760 LN H  
PB-760 LN H  
Set engine speed with throttle lever (A).  
A
PB-760 LN T  
Control engine speed with throttle trigger (C), or for  
continuous use, set engine speed with Combination Throttle  
Position / Stop Switch Button (A).  
PB-760 LN T  
C
4. Use lower speed to blow dry leaves from walks, patios and  
drives.  
5. Additional speed may be necessary to clean grass and leaves from a lawn or flower bed.  
6. Higher speed may be necessary to move gravel, dirt, snow, bottles or cans from a driveway, street,  
parking lot or stadium.  
7. Always stop unit using stop engine procedure.  
Note: Never use a higher speed setting than necessary to perform a task. Remember, the higher the engine  
speed, the louder the blower noise. Minimize dust by using blower at lower speeds. Keep debris on  
your property. Be Smart - be a good neighbor.  
X7531125002  
21  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
PB-760 LN H/T  
Cold Weather Operation:  
1. Remove back cushion (A) from frame.  
2. Install intake cover (B) on frame over air intake.  
A
3. Install back cushion (A) to frame over intake cover.  
Note: Blower performance may be reduced slightly.  
B
22  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PB-760 LN H/T  
MAINTENANCE  
MAINTENANCE  
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects  
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts  
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.  
Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and  
hot surfaces.  
Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance  
will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may  
want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to  
DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is  
not listed, see your ECHO Dealer for repairs.  
Skill Levels  
Level 1 = Easy to do. Common tools may be required.  
Level 2 = Moderate difficulty. Some specialized tools may be required.  
ECHO offers REPOWERTM Maintenance Kits and Parts to make your maintenance job easier.  
Maintenance Intervals  
DAILY  
REQ’D  
MAINTENANCE  
PROCEDURE  
OR  
EVERY  
3
COMPONENT/SYSTEM  
SKILL  
YEARLY  
BEFORE REFUEL MONTHS  
USE  
LEVEL  
Air Filter  
Inspect/Clean  
1
1
1
1
1
1
2
2
2
1
1
I / C *  
I / C  
R *  
Choke Shutter  
Fuel Filter  
Inspect/Clean  
Inspect/Replace  
I *  
I *  
I / R *  
R *  
Fuel Cap Gasket  
Fuel System  
Inspect/Replace  
Inspect/Replace  
I (1) *  
I / C  
I (1) *  
Spark Plug  
Inspect/Clean/Replace  
Inspect/Clean  
I / C / R *  
Cooling System  
Muffler Spark Arrestor  
Cylinder Exhaust Port  
Recoil Starter Rope  
Screws/Nuts/Bolts  
Inspect/Clean/Replace  
Inspect/Clean/Decarbon  
Inspect/Clean  
I / C / R *  
I / C  
I / C *  
I *  
Inspect/Tighten/Replace  
MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN  
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine  
the frequency of required maintenance.  
MAINTENANCE PROCEDURE NOTES:  
(1) Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity.  
* Replacement is recommended based on the finding of damage or wear during inspection.  
X7531125002  
23  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
MAINTENANCE  
PB-760 LN H/T  
Air Filter  
Level 1.  
REPOWERTM TUNE UP KIT.  
Parts Required:  
1. Close choke (cold start position). This prevents dirt from  
entering the carburetor throat when the air filter is removed.  
Brush accumulated dirt from air cleaner area.  
A
2. Remove air filter cover, air filter, retainer, and foam pre-filter.  
Brush dirt from inside cover.  
B
Foam Pre-Filter (A):  
• Clean foam filter in water/detergent solution and rinse with clean water.  
• Wrap the filter in a clean, dry cloth and squeeze (do not wring) dry. Allow to dry completely before reuse.  
Do not oil.  
Air Filter (B):  
• Lightly brush debris from filter.  
• Replace filter if it is damaged, very dirty, or the rubber sealing edges are deformed.  
• If filter can be reused, be certain it fits tightly in the air filter cavity, and is installed with the original side out.  
3. Assemble components in reverse order.  
Fuel Filter  
Level 1.  
REPOWERTM TUNE UP KIT.  
Parts Required:  
Fuel is VERY flammable. Use extreme care when mixing,  
storing or handling, or serious personal injury may result.  
1. Use a clean rag to remove loose dirt from around fuel cap  
and empty fuel tank.  
2. Use the “fuel line hook” to pull the fuel line and filter from the tank.  
3. Remove the filter from the line and install the new filter.  
Note: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for  
sale in the United States to be equipped with a special low permeation fuel supply hose between the  
carburetor and fuel tank. When servicing model year 2012 and later equipment, only fuel supply  
hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to  
$37,500 may be enforced for using an un-certified replacement part.  
24  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
PB-760 LN H/T  
MAINTENANCE  
Spark Plug  
Level 2.  
REPOWERTM Tune-Up Kit  
Parts Required:  
Use only NGK BPM-6Y spark plug (BPMR-6Y in Canada)  
otherwise severe engine damage may occur.  
0.65 mm  
(0.026 in.)  
1. Remove spark plug and check for fouling, worn and rounded  
center electrode.  
2. Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage  
engine.  
3. Adjust spark plug gap by bending outer electrode.  
4. Tighten spark plug to 150-170 kgf • cm (130-150 in • lbf).  
Cooling System  
Level 2.  
Parts Required: None if you are careful.  
To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area.  
This flow of air carries combustion heat away from the engine.  
Overheating and engine seizure can occur when:  
• Air intakes are blocked, preventing cooling air from  
reaching the cylinder.  
• Dust and grass build up on the outside of the cylinder. This  
build up insulates the engine and prevents the heat from  
leaving.  
Removal of cooling passage blockages or cleaning of cooling  
fins is considered “Normal Maintenance.” Any failure  
attributed to lack of maintenance is not warranted.  
Cleaning Grill  
1. Brush accumulated debris from intake grill between backpack frame and blower housing.  
X7531125002  
25  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
MAINTENANCE  
PB-760 LN H/T  
Cleaning Cylinder Fins  
1. Disconnect spark plug lead from spark plug.  
2. Remove air filter cover.  
B
A
3. Remove muffler cover (A)  
4. Remove engine cover (B)  
5. Clean cylinder fins (C) to allow cooling air to pass freely  
6. Install engine cover and muffler cover.  
7. Install air filter cover.  
8. Connect spark plug lead.  
C
Exhaust System  
Spark Arrestor Screen  
Level 2.  
Parts Required: Spark Arrestor Screen, Gasket  
Carbon deposits in muffler will cause a drop in engine output  
and overheating. Spark arrestor screen must be checked  
periodically.  
1. Disconnect spark plug lead from spark plug  
2. Remove muffler cover (A).  
3. Remove spark arrestor cover (B), gasket (C) and spark  
arrestor screen (D) from muffler. Replace screen if plugged  
with carbon deposits.  
A
Note: When cleaning carbon deposits, be careful not to damage  
the catalytic element inside muffler.  
4. Install spark arrestor screen, gasket, and spark arrestor  
cover.  
5. Install muffler cover.  
6. Connect spark plug lead.  
D
C
B
26  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PB-760 LN H/T  
MAINTENANCE  
Exhaust Port Cleaning  
Level 2.  
B
Parts Required: As needed: Muffler Gasket  
C
1. Remove spark plug lead from spark plug.  
2. Remove muffler cover and engine cover.  
3. Place piston at top dead center. Remove muffler (A) muffler  
gasket (B), and muffler insulator (C).  
A
4. Use a wood or plastic scraping tool to clean deposits from  
cylinder exhaust port.  
Never use a metal tool to scrape carbon from the exhaust port. Do not scratch the cylinder or piston when  
cleaning the exhaust port. Do not allow carbon particles to enter the cylinder.  
5. Inspect muffler gasket, and replace if damaged.  
6. Install muffler insulator, muffler gasket and muffler.  
7. Tighten muffler mounting bolts (or nuts) to 95-130 in•lbf  
(110-150 kgf•cm).  
8. Install engine cover and attach spark plug lead  
9. Start engine, and warm to operating temperature.  
10. Stop engine, and re-tighten mounting bolts (or nuts) to  
specifications.  
11. Install muffler cover.  
Carburetor Adjustment  
Engine Break-In  
New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor  
adjustments can be made. During the break-in period your engine performance will increase and exhaust  
emissions will stabilize. Idle speed can be adjusted as required.  
High Altitude Operation  
This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance  
up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission  
compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service  
dealer.  
If the engine is adjusted for operation above 1,100 feet ASL, the carburetor must be re-adjusted when  
operating the engine below 1,100 feet ASL, otherwise severe engine damage may result.  
Level 2.  
Parts Required: None  
X7531125002  
27  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MAINTENANCE  
PB-760 LN H/T  
Note: Every unit is run at the factory and the carburetor is set in compliance with emission regulations.  
Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer.  
Idle Adjustment  
Before adjustment make sure that:  
• Air filter is clean and properly installed.  
• Spark arrestor screen and muffler are free of carbon.  
• Blower pipes are installed.  
1. Start engine, run at idle for one minute.  
2. Complete warm up by running at full throttle for 5 minutes,  
operating choke twice to clear air from carburetor chambers.  
A
3. Check idle speed and reset if necessary. If a tachometer is  
available, idle speed screw (A) should be set to the  
specifications found on "Specifications" Page of this  
manual. Turn idle screw (A) clockwise to increase idle  
speed; counter clockwise to decrease idle speed.  
28  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PB-760 LN H/T  
TROUBLESHOOTING  
TROUBLESHOOTING  
ENGINE PROBLEM TROUBLESHOOTING CHART  
Problem  
Check  
Status  
Cause  
Remedy  
Fuel strainer clogged  
Fuel line clogged  
Carburetor  
Clean or replace  
Clean or replace  
See your Echo dealer  
Fuel at carburetor No fuel at carburetor  
No fuel at cylinder  
Carburetor  
See your Echo dealer  
Open choke  
Fuel at cylinder  
Clean/replace air filter  
Adjust carburetor  
See your Echo dealer  
Muffler wet with fuel  
Fuel Mixture too rich  
Enginecranks-  
starts hard/  
doesn’t start  
Stop switch off  
Electrical problem  
Interlock switch  
Turn switch to ON  
See your Echo dealer  
See your Echo dealer  
Spark at end of  
No spark  
plug wire  
Spark gap incorrect  
Covered with carbon  
Fouled with fuel  
Adjust to .65mm (0.026 in.)  
Clean or replace  
Clean or replace  
Spark at plug  
No spark  
Plug defective  
Replace plug  
Air filter  
Air filter dirty  
Normal wear  
Clean or replace  
Contaminants/residues  
in fuel  
Fuel filter  
Fuel filter dirty  
Replace  
Contaminants/residues  
in fuel  
Engine runs,  
but dies or  
does not  
accelerate  
properly  
Fuel vent  
Fuel vent plugged  
Clean or replace  
Spark Plug  
Carburetor  
Plug dirty/worn  
Normal wear  
Vibration  
Clean and adjust or replace  
Adjust  
Improper adjustment  
Cooling system  
dirty/plugged  
Extended operation in  
dirty/dusty locations  
Cooling System  
Clean  
Spark Arrestor  
Screen  
Spark arrestor screen  
plugged  
Normal wear  
Replace  
Engine does  
not crank  
N/A  
N/A  
Internal engine problem See your Echo dealer  
Engine runs,  
blower doesn't  
work or is  
Blower pipe  
Pipe clogged  
Pipe loose  
Build-up of debris  
Vibration  
Unclog  
Tighten  
Replace  
Pipe damaged  
Wear/Misuse  
weak/uneven  
Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition  
spark by grounding spark plug near cylinder plug hole, otherwise serious personal injury may  
result.  
X7531125002  
29  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
STORAGE  
PB-760 LN H/T  
STORAGE  
During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep  
exhaust area clear of flammable debris during transportation or when storing, otherwise serious  
property damage or personal injury may result.  
Long Term Storage (Over 30 Days)  
Do not store your unit for a prolonged period of time (30 days or longer) without performing protective  
storage maintenance which includes the following:  
1. Store unit in a dry, dust free place, out of the reach of children.  
Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark.  
2. Place the stop switch in the “OFF” position.  
3. Remove accumulation of grease, oil, dirt and debris from exterior of unit.  
4. Perform all periodic lubrication and services that are required.  
5. Tighten all the screws and nuts.  
6. Drain fuel tank completely. Press purge bulb 6 -7 times to remove remaining fuel from carburetor then  
drain the tank again. Close choke, start and run the engine until it stops due to lack of fuel.  
7.  
a. Allow engine to cool then remove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke  
engine oil into the cylinder through the spark plug hole.  
b. Pull the recoil starter handle 2-3 times to distribute the oil inside the engine.  
c. Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston  
reaches the top of its travel and leave it there.  
8. Install the spark plug (do not connect ignition cable).  
9. Remove blower pipe assembly from unit.  
30  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
PB-760 LN H/T  
SPECIFICATIONS  
SPECIFICATIONS  
MODEL  
Length 760 LN H  
Length 760 LN T  
Width 760 LN H  
Width 760 LN T  
Height 760 LN H  
Height 760 LN T  
Weight (dry) 760 LN H  
Weight (dry) 760 LN T  
Engine Type  
PB-760 LN H, PB-760 LN T  
375mm (14.8 in.) (w/o pipes)  
375mm (14.8 in.) (w/o pipes)  
535 mm (21.1 in.)  
490 mm (19.3 in.)  
475 mm (18.7 in.)  
475 mm (18.7 in.)  
10.9 kg (24 lb.) (w/o pipes)  
10.8 kg (23.8 lb.) (w/o pipes)  
Air cooled, two-stroke, single cylinder gasoline engine  
48.0 mm (1.89 in.)  
Bore  
Stroke  
35.0 mm (1.38 in.)  
Displacement  
Exhaust  
63.3cc (3.86 cu. in.)  
Spark arrestor - catalytic muffler / muffler  
Diaphragm model w/purge bulb  
Flywheel magneto, capacitor discharge ignition type  
NGK BPM-6Y (Gap 0.65 mm (0.026 in.)  
Mixed (Gasoline and Two-stroke Oil)  
Carburetor  
Ignition System  
Spark Plug  
Fuel  
50 : 1 Power Blend XTM ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345- FD, two-stroke,  
air-cooled engine oil.  
Fuel/Oil Ratio  
Gasoline  
Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl  
alcohol or 15% MTBE. Do not use alternative fuels such as E-15 or E-85.  
Oil  
Power Blend XTM Premium Universal 2-Stroke Oil  
Fuel Tank Capacity  
Starter System  
Idle Speed  
2.02 lit. (68.3 US fl. oz.)  
Automatic Rrecoil Starter, centrifugal type  
2,450 RPM  
Wide Open Throttle Speed (W.O.T.) 6,000 RPM  
Maximum Air Speed w/pipes  
Average Air Speed w/pipes  
Air Volume  
95.7 m/sec (214 mph)  
79.6 m/sec (178 mph)  
15.1 m3/min. (535 cu. ft./min.)  
Sound Level at 50 ft. dB(A) scale per 65 dB(A)  
ANSI B175.265 dB(A)  
X7531125002  
31  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
WARRANTY STATEMENTS  
PB-760 LN H/T  
WARRANTY STATEMENTS  
ECHO LIMITED WARRANTY STATEMENT FOR  
PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010  
ECHO'S RESPONSIBILITY  
ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship.  
Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace at ECHO’s discretion, any defective product  
free of charge at any authorized ECHO servicing dealer within listed below application time periods, limitations and exclusions. THIS LIMITED  
WARRANTY IS ONLYAPPLICABLE TO ECHO PRODUCTS SOLD BYAUTHORIZED ECHO DEALERS. IT IS EXTENDED TO THE ORIGINAL  
PURCHASER ONLY, AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS. Repair  
parts and accessories replaced under this warranty are warranted only for the balance of the original unit or accessory warranty period. Any  
damage caused by improper installation or improper maintenance is not covered by this warranty. All parts or products replaced under warranty  
become the property of ECHO, Inc. This warranty is separate from the Emission control warranty statement supplied with your new product.  
Please consult the Emission Control Warranty Statement for details regarding emission related parts. For a list of Authorized ECHO Dealers  
refer to WWW.ECHO-USA.COM or call 1-800-432-ECHO.  
OWNER’S RESPONSIBILITY  
To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at WWW.ECHO-USA.COMꢀꢁꢂꢀꢃꢄꢀꢅꢆꢆ-  
ꢇꢈꢉꢀꢁꢊꢋꢀꢋꢌꢍꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢂꢍꢉꢇꢐꢋꢂꢏꢋꢇꢁꢈꢀꢑꢏꢂꢒꢀꢐꢊꢓꢓꢆꢇꢍꢒꢀꢎꢇꢋꢌꢀꢄꢁꢊꢂꢀꢊꢈꢇꢋꢔꢀꢕꢍꢉꢇꢐꢋꢍꢂꢇꢈꢉꢀꢄꢁꢊꢂꢀꢓꢂꢁꢒꢊꢑꢋꢀꢑꢁꢈꢅꢂꢖꢐꢀꢄꢁꢊꢂꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢑꢁꢗꢍꢂꢏꢉꢍꢀꢏꢈꢒꢀꢓꢂꢁꢗꢇꢒꢍꢐꢀꢏꢀꢒꢇꢂꢍꢑꢋꢀ  
ꢆꢇꢈꢘꢀꢇꢙꢀꢎꢍꢀꢅꢈꢒꢀꢇꢋꢀꢈꢍꢑꢍꢐꢐꢏꢂꢄꢀꢋꢁꢀꢑꢁꢈꢋꢏꢑꢋꢀꢄꢁꢊꢔ  
The owner shall demonstrate reasonable care and use, and follow preventative maintenance, storage, fuel and oil usage as prescribed in the  
ꢁꢓꢍꢂꢏꢋꢁꢂꢝꢐꢀꢖꢏꢈꢊꢏꢆꢔꢀꢚꢌꢁꢊꢆꢒꢀꢏꢀꢓꢂꢁꢒꢊꢑꢋꢀꢒꢇꢙꢅꢑꢊꢆꢋꢄꢀꢁꢑꢑꢊꢂꢛꢀꢄꢁꢊꢀꢖꢊꢐꢋꢛꢀꢏꢋꢀꢄꢁꢊꢂꢀꢍꢜꢓꢍꢈꢐꢍꢛꢀꢒꢍꢆꢇꢗꢍꢂꢀꢁꢂꢀꢐꢌꢇꢓꢀꢄꢁꢊꢂꢀ!"#$ꢀꢊꢈꢇꢋꢀꢋꢁꢀꢏꢈꢀꢏꢊꢋꢌꢁꢂꢇ%ꢍꢒꢀ!"#$ꢀꢐꢍꢂꢗꢇꢑꢇꢈꢉꢀ  
dealer for warranty repairs (within the applicable warranty period), and arrange for pick-up or return of your unit after the repairs have been  
made. For your nearest authorized ECHO servicing dealer, call ECHO’s Dealer Referral Center, at 1-800-432-ECHO or you can locate an ECHO  
servicing dealer at WWW.ECHO-USA.COM. Should you require assistance or have questions concerning ECHO’s Warranty Statement, you  
can contact our Consumer Product Support Department at 1-800-673-1558 or contact us through the web at WWW.ECHO-USA.COM.  
PRODUCT WARRANTY PERIOD  
RESIDENTIAL APPLICATION  
#ꢀꢀ 5 YEAR WARRANTY - All units for residential, or non-income producing use will be covered by this limited warranty for [ꢀꢁ ꢂꢃꢄꢅꢆꢁꢇꢈꢉ from  
date of purchase.  
EXCEPTIONS:  
#ꢀ 'ꢁꢂꢀꢋꢎꢁ*ꢐꢋꢂꢁꢘꢍꢀꢍꢈꢉꢇꢈꢍꢀꢓꢁꢎꢍꢂꢍꢒꢀꢓꢂꢁꢒꢊꢑꢋꢐꢛꢀꢋꢌꢍꢀꢍꢆꢍꢑꢋꢂꢁꢈꢇꢑꢀꢇꢉꢈꢇꢋꢇꢁꢈꢀꢖꢁꢒꢊꢆꢍꢛꢀ\ꢍꢜꢇꢃꢆꢍꢀꢒꢂꢇꢗꢍꢀꢑꢏꢃꢆꢍꢐꢛꢀꢚꢕ/ꢀꢐꢁꢆꢇꢒꢀꢒꢂꢇꢗꢍꢀꢐꢌꢏꢙꢋꢐꢛꢀꢏꢈꢒꢀ9"ꢀꢋꢇꢈꢍꢐꢀ  
are warranted for the ꢊꢋꢌꢁꢍ of the product on parts only.  
#ꢀ "ꢊꢋꢋꢇꢈꢉꢀꢏꢋꢋꢏꢑꢌꢖꢍꢈꢋꢐꢀꢐꢊꢑꢌꢀꢏꢐꢛꢀꢃꢊꢋꢀꢈꢁꢋꢀꢆꢇꢖꢇꢋꢍꢒꢀꢋꢁꢛꢀꢃꢏꢂꢐꢛꢀꢑꢌꢏꢇꢈꢐꢛꢀꢐꢓꢂꢁꢑꢘꢍꢋꢐꢛꢀꢃꢆꢏꢒꢍꢐꢛꢀꢏꢈꢒꢀꢈꢄꢆꢁꢈꢀꢋꢂꢇꢖꢖꢍꢂꢀꢌꢍꢏꢒꢐꢀꢙꢁꢂꢀꢂꢍꢐꢇꢒꢍꢈꢋꢇꢏꢆꢀꢁꢂꢀꢈꢁꢈ*ꢇꢈꢑꢁꢖꢍꢀ  
producing use will be covered for failures due to defects in material or workmanship for a period of ꢎꢏꢅꢐꢇꢆꢉ from original product  
purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by this warranty.  
#ꢀꢀ !"#$ꢝꢐꢀꢕꢏꢓꢇꢒꢀ:ꢁꢏꢒꢍꢂꢀꢚꢋꢂꢇꢈꢉꢀ#ꢍꢏꢒꢀꢑꢏꢂꢂꢇꢍꢐꢀꢏꢀꢆꢇꢙꢍꢋꢇꢖꢍꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢁꢈꢀꢋꢌꢍꢀꢆꢇꢈꢍꢀꢆꢁꢑꢘꢇꢈꢉꢀꢐꢄꢐꢋꢍꢖꢛꢀꢓꢏꢂꢋꢐꢀꢁꢈꢆꢄ;ꢀꢈꢁꢀꢆꢏꢃꢁꢂꢔꢀꢕꢍꢙꢍꢂꢀꢋꢁꢀꢄꢁꢊꢂꢀꢁꢓꢍꢂꢏꢋꢁꢂꢝꢐꢀ  
manual for string head installation and maintenance instructions.  
#ꢀꢀ <ꢆꢆ=*ꢚꢍꢂꢇꢍꢐꢈꢒ>ꢕ$ꢀ<99<"#/!?9!ꢕ@!ꢚꢓꢆꢇꢋꢌꢏꢙꢋꢋꢋꢏꢑꢌꢖꢍꢈꢋꢐꢏꢂꢂꢄꢌꢍꢏꢖꢍꢏꢂꢂꢏꢈꢋꢄꢊꢂꢏꢋꢇꢁꢈꢌꢍꢈꢇꢋꢐꢌꢍꢄꢂꢍꢀ  
ꢒꢍꢐꢇꢉꢈꢍꢒꢀꢋꢁꢀꢅꢋꢔ  
COMMERCIAL APPLICATION  
#ꢀꢀ 1 YEAR WARRANTY - All Chain Saws, QuikVent Saws, and Cut-Off Saws for commercial, institutional, agricultural, industrial, or income  
producing use will be covered by this limited warranty for one ꢂꢑꢄꢅꢆꢁꢇꢈ from the date of purchase.  
#ꢀꢀ 2 YEAR WARRANTY - All other units for commercial, institutional, agricultural, industrial, or income producing use will be covered by this  
limited warranty for two ꢂꢒꢄꢅꢆꢁꢇꢈꢉ from the date of purchase.  
EXCEPTIONS:  
#ꢀ 'ꢁꢂꢀꢋꢎꢁ*ꢐꢋꢂꢁꢘꢍꢀꢍꢈꢉꢇꢈꢍꢀꢓꢁꢎꢍꢂꢍꢒꢀꢓꢂꢁꢒꢊꢑꢋꢐꢛꢀꢋꢌꢍꢀꢍꢆꢍꢑꢋꢂꢁꢈꢇꢑꢀꢇꢉꢈꢇꢋꢇꢁꢈꢀꢖꢁꢒꢊꢆꢍꢛꢀ\ꢍꢜꢇꢃꢆꢍꢀꢒꢂꢇꢗꢍꢀꢑꢏꢃꢆꢍꢐꢛꢀꢚꢕ/ꢀꢐꢁꢆꢇꢒꢀꢒꢂꢇꢗꢍꢀꢐꢌꢏꢙꢋꢐꢀꢏꢈꢒꢀ9"ꢀꢋꢇꢈꢍꢐꢛꢀ  
are warranted for the ꢊꢋꢌꢁꢍ of the product on parts only.  
#ꢀ "ꢊꢋꢋꢇꢈꢉꢀꢏꢋꢋꢏꢑꢌꢖꢍꢈꢋꢐꢀꢐꢊꢑꢌꢀꢏꢐꢛꢀꢃꢊꢋꢀꢈꢁꢋꢀꢆꢇꢖꢇꢋꢍꢒꢀꢋꢁꢛꢀꢃꢏꢂꢐꢛꢀꢑꢌꢏꢇꢈꢐꢛꢀꢐꢓꢂꢁꢑꢘꢍꢋꢐꢛꢀꢃꢆꢏꢒꢍꢐꢛꢀꢏꢈꢒꢀꢈꢄꢆꢁꢈꢀꢋꢂꢇꢖꢖꢍꢂꢀꢌꢍꢏꢒꢐꢀꢙꢁꢂꢀꢑꢁꢖꢖꢍꢂꢑꢇꢏꢆꢛꢀꢇꢈꢐꢋꢇꢋꢊꢋꢇꢁꢈꢏꢆꢛꢀ  
agricultural, industrial, rental, or income producing will be covered for failures due to defects in material or workmanship for a period  
of ꢓꢏꢅꢐꢇꢆꢉ from original product purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by  
this warranty.  
#ꢀꢀ !"#$ꢝꢐꢀꢕꢏꢓꢇꢒꢀ:ꢁꢏꢒꢍꢂꢀꢚꢋꢂꢇꢈꢉꢀ#ꢍꢏꢒꢀꢑꢏꢂꢂꢇꢍꢐꢀꢏꢀꢆꢇꢙꢍꢋꢇꢖꢍꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢁꢈꢀꢋꢌꢍꢀꢆꢇꢈꢍꢀꢆꢁꢑꢘꢇꢈꢉꢀꢐꢄꢐꢋꢍꢖꢛꢀꢓꢏꢂꢋꢐꢀꢁꢈꢆꢄ;ꢀꢈꢁꢀꢆꢏꢃꢁꢂꢔꢀꢕꢍꢙꢍꢂꢀꢋꢁꢀꢄꢁꢊꢂꢀꢁꢓꢍꢂꢏꢋꢁꢂꢝꢐꢀ  
manual for string head installation and maintenance instructions.  
#ꢀꢀ <ꢆꢆ=*ꢚꢍꢂꢇꢍꢐꢈꢒ>ꢕ$ꢀ<99<"#/!?9!ꢕ@!ꢚꢓꢆꢇꢋꢌꢏꢙꢋꢋꢋꢏꢑꢌꢖꢍꢈꢋꢐꢏꢂꢂꢄꢌꢍꢏꢖꢍꢏꢂꢂꢏꢈꢋꢄꢊꢂꢏꢋꢇꢁꢈꢌꢍꢈꢇꢋꢐꢌꢍꢄꢂꢍꢀ  
ꢒꢍꢐꢇꢉꢈꢍꢒꢀꢋꢁꢀꢅꢋꢔ  
RENTAL APPLICATION - 90 DAYS WARRANTY  
#ꢀꢀBꢈꢇꢋꢐꢀꢙꢁꢂꢀꢂꢍꢈꢋꢏꢆꢀꢊꢐꢍꢀꢎꢇꢆꢆꢀꢃꢍꢀꢑꢁꢗꢍꢂꢍꢒꢀꢏꢉꢏꢇꢈꢐꢋꢀꢒꢍꢙꢍꢑꢋꢐꢀꢇꢈꢀꢖꢏꢋꢍꢂꢇꢏꢆꢀꢏꢈꢒꢀꢎꢁꢂꢘꢖꢏꢈꢐꢌꢇꢓꢀꢙꢁꢂꢀꢏꢀꢓꢍꢂꢇꢁꢒꢀꢁꢙꢀGJꢀꢒꢏꢄꢐꢀꢙꢂꢁꢖꢀꢋꢌꢍꢀꢒꢏꢋꢍꢀꢁꢙꢀꢓꢊꢂꢑꢌꢏꢐꢍꢔꢀ  
ꢀꢀ !"#$ꢝꢐꢀꢆꢇꢏꢃꢇꢆꢇꢋꢄꢀꢊꢈꢒꢍꢂꢀꢋꢌꢍꢀO:ꢇꢙꢍꢋꢇꢖꢍPꢀꢑꢁꢗꢍꢂꢏꢉꢍꢀꢇꢐꢀꢆꢇꢖꢇꢋꢍꢒꢀꢋꢁꢀꢙꢊꢂꢈꢇꢐꢌꢇꢈꢉꢀꢓꢏꢂꢋꢐꢀꢐꢓꢍꢑꢇꢅꢍꢒꢀꢊꢈꢒꢍꢂꢀꢋꢌꢍꢀ>ꢕ$XB"9ꢀY<ꢕꢕ<?9Zꢀ>!ꢕ@$X section of  
this warranty statement for OꢔꢋꢌꢁPꢀꢙꢂꢍꢍꢀꢁꢙꢀꢑꢌꢏꢂꢉꢍꢀꢙꢁꢂꢀꢏꢀꢓꢍꢂꢇꢁꢒꢀꢁꢙꢀꢋꢍꢈꢀ[\J]ꢀꢄꢍꢏꢂꢐꢀꢏꢙꢋꢍꢂꢀꢋꢌꢍꢀꢒꢏꢋꢍꢀꢁꢙꢀꢋꢌꢍꢀꢑꢁꢖꢓꢆꢍꢋꢍꢀꢊꢈꢇꢋꢝꢐꢀꢅꢈꢏꢆꢀꢓꢂꢁꢒꢊꢑꢋꢇꢁꢈꢔꢀ  
32  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PB-760 LN H/T  
WARRANTY STATEMENTS  
PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES  
#ꢀꢀGJ*ꢒꢏꢄꢀꢂꢍꢐꢇꢒꢍꢈꢋꢇꢏꢆꢛꢀꢁꢂꢀꢈꢁꢈ*ꢇꢈꢑꢁꢖꢍꢀꢓꢂꢁꢒꢊꢑꢇꢈꢉꢀꢎꢏꢂꢂꢏꢈꢋꢄ  
#ꢀꢀ^J*ꢒꢏꢄꢀꢑꢁꢖꢖꢍꢂꢑꢇꢏꢆꢛꢀꢇꢈꢐꢋꢇꢋꢊꢋꢇꢁꢈꢏꢆꢛꢀꢏꢉꢂꢇꢑꢊꢆꢋꢊꢂꢏꢆꢛꢀꢇꢈꢒꢊꢐꢋꢂꢇꢏꢆꢛꢀꢇꢈꢑꢁꢖꢍꢀꢓꢂꢁꢒꢊꢑꢇꢈꢉꢛꢀꢁꢂꢀꢂꢍꢈꢋꢏꢆꢀꢏꢓꢓꢆꢇꢑꢏꢋꢇꢁꢈꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢀ  
ATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS  
This ECHO two-stroke engine power product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior  
performance. To help ensure the performance of the unit, it is required to use two-stroke oil which meets the ISO-L-EGD Standard per ISO/CD  
13738 and JASO M345FD Standards. ꢕꢖꢗꢘꢅꢙꢚ!ꢁꢈꢅ"ꢊꢁ#ꢐ(ꢅ%!ꢚ&()ꢈꢚ*ꢁꢅꢘꢋꢊ ꢇꢐꢀꢏꢀꢓꢂꢍꢖꢇꢊꢖꢀꢋꢎꢁ*ꢐꢋꢂꢁꢘꢍꢀꢁꢇꢆꢀꢐꢓꢍꢑꢇꢅꢑꢏꢆꢆꢄꢀꢙꢁꢂꢖꢊꢆꢏꢋꢍꢒꢀꢋꢁꢀꢖꢍꢍꢋꢀ@ꢚ$*  
L-EGD (ISO/CD 13738) and JASO M345FD Standards. The use of two-stroke oils designed for other applications, such as for outboard motors  
or lawnmowers can result in severe engine damage, and will void your two-stroke engine limited warranty.  
THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY:  
#ꢀ  
:ꢏꢑꢘꢀꢁꢙꢀꢆꢊꢃꢂꢇꢑꢏꢋꢇꢁꢈꢀꢁꢂꢀꢍꢈꢉꢇꢈꢍꢀꢙꢏꢇꢆꢊꢂꢍꢛꢀꢒꢊꢍꢀꢋꢁꢀꢋꢌꢍꢀꢊꢐꢍꢀꢁꢙꢀꢋꢎꢁ*ꢐꢋꢂꢁꢘꢍꢀꢁꢇꢆꢐꢀthat do not meet the ISO-L-EGD (ISO/CD 13738) and JASO M345FD  
Standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD compliant and JASO M345FD registered  
oil, will void the two-stroke engine limited warranty. !"#$>ꢁꢎꢍꢂ=ꢆꢍꢈꢒ(9ꢎꢁ*ꢚꢋꢂꢁꢘꢍ$ꢇꢆ meets the ISO-L-EGD and JASO M345FD  
Standard. Emission related parts are covered for 5 years residential use or 2 years commercial use regardless of two-stroke oil used, per  
the statement listed in the EPA or California Emission Defect Warranty Explanation.  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢊꢐꢍꢀꢁꢙꢀꢉꢏꢐꢁꢌꢁꢆꢛꢀꢑꢁꢈꢋꢏꢇꢈꢇꢈꢉꢀꢖꢍꢋꢌꢏꢈꢁꢆꢀ[ꢎꢁꢁꢒꢀꢏꢆꢑꢁꢌꢁꢆ]ꢛꢀꢁꢂꢀꢉꢏꢐꢁꢆꢇꢈꢍꢀꢑꢁꢈꢋꢏꢇꢈꢇꢈꢉꢀꢆꢍꢐꢐꢀꢋꢌꢏꢈꢀ|Gꢀꢁꢑꢋꢏꢈꢍ. Only use gasoline which  
contains |Gꢀꢁꢑꢋꢏꢈꢍꢀꢁꢂꢀꢌꢇꢉꢌꢍꢂ. Gasohol which contains a +ꢇ6ꢋ+7+\J}ꢀꢍꢋꢌꢏꢈꢁꢆꢀ[ꢉꢂꢏꢇꢈꢀꢏꢆꢑꢁꢌꢁꢆ]ꢀꢁꢂꢀ\~}ꢀ/9=!ꢀ[ꢖꢍꢋꢌꢄꢆꢋꢍꢂꢋꢇꢏꢂꢄꢃꢊꢋꢄꢆꢍꢋꢌꢍꢂ]ꢀ  
is also approved. The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator’s manual.  
!ꢈꢉꢇꢈꢍꢀꢒꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢊꢐꢍꢀꢁꢙꢀꢍꢋꢌꢍꢂꢀꢁꢂꢀꢏꢈꢄꢀꢐꢋꢏꢂꢋꢇꢈꢉꢀ\ꢊꢇꢒꢐꢔꢀꢀ  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢋꢏꢖꢓꢍꢂꢇꢈꢉꢀꢎꢇꢋꢌꢀꢍꢈꢉꢇꢈꢍꢀꢐꢓꢍꢍꢒꢀꢉꢁꢗꢍꢂꢈꢁꢂꢀꢁꢂꢀꢍꢖꢇꢐꢐꢇꢁꢈꢀꢑꢁꢖꢓꢁꢈꢍꢈꢋꢐꢛꢀꢁꢂꢀꢂꢊꢈꢈꢇꢈꢉꢀꢍꢈꢉꢇꢈꢍꢐꢀꢏꢃꢁꢗꢍꢀꢐꢓꢍꢑꢇꢅꢍꢒꢀꢏꢈꢒꢀꢂꢍꢑꢁꢖꢖꢍꢈꢒꢍꢒꢀ  
engine speeds as listed in your operator’s manual.  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
$ꢓꢍꢂꢏꢋꢇꢁꢈꢀꢁꢙꢀꢋꢌꢍꢀꢊꢈꢇꢋꢀꢎꢇꢋꢌꢀꢇꢖꢓꢂꢁꢓꢍꢂꢆꢄꢀꢖꢏꢇꢈꢋꢏꢇꢈꢍꢒꢂꢍꢖꢁꢗꢍꢒꢀꢑꢊꢋꢋꢇꢈꢉꢀꢐꢌꢇꢍꢆꢒꢀꢁꢂꢀꢂꢍꢖꢁꢗꢍꢒꢒꢏꢖꢏꢉꢍꢒꢀꢏꢇꢂꢀꢅꢆꢋꢍꢂꢔꢀꢀ  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢒꢇꢂꢋꢛꢀꢓꢂꢍꢐꢐꢊꢂꢍꢀꢁꢂꢀꢐꢋꢍꢏꢖꢀꢑꢆꢍꢏꢈꢇꢈꢉꢀꢋꢌꢍꢀꢊꢈꢇꢋꢛꢀꢐꢏꢆꢋꢀꢎꢏꢋꢍꢂꢛꢀꢑꢁꢂꢂꢁꢐꢇꢁꢈꢛꢀꢂꢊꢐꢋꢛꢀꢗꢏꢂꢈꢇꢐꢌꢛꢀꢏꢃꢂꢏꢐꢇꢗꢍꢐꢛꢀꢏꢈꢒꢀꢖꢁꢇꢐꢋꢊꢂꢍꢔ  
Xꢍꢙꢍꢑꢋꢐꢛꢀꢖꢏꢆꢙꢊꢈꢑꢋꢇꢁꢈꢐꢀꢁꢂꢀꢙꢏꢇꢆꢊꢂꢍꢐꢀꢂꢍꢐꢊꢆꢋꢇꢈꢉꢀꢙꢂꢁꢖꢀꢏꢃꢊꢐꢍꢛꢀꢖꢇꢐꢊꢐꢍꢛꢀꢈꢍꢉꢆꢍꢑꢋꢛꢀꢖꢁꢒꢇꢅꢑꢏꢋꢇꢁꢈꢐꢛꢀꢏꢆꢋꢍꢂꢏꢋꢇꢁꢈꢐꢛꢀꢈꢁꢂꢖꢏꢆꢀꢎꢍꢏꢂꢛꢀꢇꢖꢓꢂꢁꢓꢍꢂꢀꢐꢍꢂꢗꢇꢑꢇꢈꢉꢛꢀꢁꢂꢀꢊꢐꢍꢀ  
of unauthorized attachments.  
#ꢀ  
#ꢀ  
@ꢈꢑꢁꢂꢂꢍꢑꢋꢀꢐꢋꢁꢂꢏꢉꢍꢀꢓꢂꢁꢑꢍꢒꢊꢂꢍꢐꢛꢀꢐꢋꢏꢆꢍꢀꢙꢊꢍꢆꢛꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢙꢏꢇꢆꢊꢂꢍꢀꢋꢁꢀꢓꢂꢁꢗꢇꢒꢍꢀꢁꢂꢀꢓꢍꢂꢙꢁꢂꢖꢀꢂꢍ€ꢊꢇꢂꢍꢒꢀꢖꢏꢇꢈꢋꢍꢈꢏꢈꢑꢍꢀꢐꢍꢂꢗꢇꢑꢍꢐꢀꢏꢐꢀꢓꢂꢍꢐꢑꢂꢇꢃꢍꢒꢀꢇꢈꢀꢋꢌꢍꢀꢁꢓꢍꢂꢏꢋꢁꢂꢐꢀ  
manual. Preventative maintenance as outlined in the operators manual is the customer’s responsibility.  
'ꢏꢇꢆꢊꢂꢍꢐꢀꢒꢊꢍꢀꢋꢁꢀꢇꢖꢓꢂꢁꢓꢍꢂꢀꢐꢍꢋ*ꢊꢓꢛꢀꢓꢂꢍ*ꢒꢍꢆꢇꢗꢍꢂꢄꢀꢐꢍꢂꢗꢇꢑꢍꢀꢁꢂꢀꢂꢍꢓꢏꢇꢂꢀꢐꢍꢂꢗꢇꢑꢍꢀꢃꢄꢀꢏꢈꢄꢁꢈꢍꢀꢁꢋꢌꢍꢂꢀꢋꢌꢏꢈꢀꢏꢊꢋꢌꢁꢂꢇ%ꢍꢒꢀ!"#$ꢀꢐꢍꢂꢗꢇꢑꢇꢈꢉꢀꢒꢍꢏꢆꢍꢂꢀꢒꢊꢂꢇꢈꢉꢀꢋꢌꢍꢀ  
warranty period.  
"ꢍꢂꢋꢏꢇꢈꢀparts and other items are not warranted, including but not limited to: lubricants, starter cords, and engine tune-ups.  
Bꢐꢍꢓꢏꢂꢘꢆꢊꢉꢐꢋꢌꢍꢂꢌꢏꢈꢌꢁꢐꢍꢍꢍꢋꢇꢈꢉꢍꢂꢙꢁꢂꢖꢏꢈꢑꢍꢈꢒꢊꢂꢏꢃꢇꢆꢇꢋꢄꢍ€ꢊꢇꢂꢍꢖꢍꢈꢋꢐꢌꢍ$!/ꢓꢏꢂꢘꢆꢊꢉꢇꢐꢋꢍꢒꢌꢍ$ꢓꢍꢂꢏꢋꢁꢂꢐꢀ  
Manuals.  
$ꢗꢍꢂꢌꢍꢏꢋꢇꢈꢉꢀꢁꢂꢀꢑꢏꢂꢃꢁꢈꢀꢐꢑꢁꢂꢇꢈꢉꢀꢙꢏꢇꢆꢊꢂꢍꢐꢀꢒꢊꢍꢀꢋꢁꢀꢂꢍꢐꢋꢂꢇꢑꢋꢍꢒꢛꢀꢑꢆꢁꢉꢉꢍꢒꢀꢍꢜꢌꢏꢊꢐꢋꢀꢓꢁꢂꢋꢀꢁꢂꢀꢑꢁꢖꢃꢊꢐꢋꢇꢁꢈꢀꢑꢌꢏꢖꢃꢍꢂꢛꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢒꢏꢖꢏꢉꢍꢀꢋꢁꢀꢐꢓꢏꢂꢘꢀꢏꢂꢂꢍꢐꢋꢍꢂꢀ  
screen.  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
#ꢀ  
<ꢒƒꢊꢐꢋꢖꢍꢈꢋꢐꢀꢏꢙꢋꢍꢂꢀꢋꢌꢍꢀꢅꢂꢐꢋꢀ[^J]ꢀꢋꢌꢇꢂꢋꢄꢀꢒꢏꢄꢐꢀꢏꢈꢒꢀꢃꢍꢄꢁꢈꢒꢛꢀꢐꢊꢑꢌꢀꢏꢐꢀꢑꢏꢂꢃꢊꢂꢍꢋꢁꢂꢀꢏꢒƒꢊꢐꢋꢖꢍꢈꢋꢀꢏꢈꢒꢀꢋꢌꢂꢁꢋꢋꢆꢍꢀꢑꢏꢃꢆꢍꢀꢏꢒƒꢊꢐꢋꢖꢍꢈꢋꢔꢀ  
Xꢏꢖꢏꢉꢍꢀꢋꢁꢀꢉꢍꢏꢂꢐꢀꢁꢂꢀꢉꢍꢏꢂꢀꢑꢏꢐꢍꢐꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢑꢁꢈꢋꢏꢖꢇꢈꢏꢋꢍꢒꢀꢉꢂꢍꢏꢐꢍꢀꢁꢂꢀꢁꢇꢆꢛꢀꢊꢐꢍꢀꢁꢙꢀꢇꢈꢑꢁꢂꢂꢍꢑꢋꢀꢋꢄꢓꢍꢀꢁꢂꢀꢗꢇꢐꢑꢁꢐꢇꢋꢄꢀꢁꢙꢀꢆꢊꢃꢂꢇꢑꢏꢈꢋꢐꢛꢀꢏꢈꢒꢁꢂꢀꢙꢏꢇꢆꢊꢂꢍꢀꢋꢁꢀꢑꢁꢖꢓꢆꢄꢀ  
with recommended grease or oil change intervals.  
#ꢀ  
#ꢀ  
#ꢀ  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢆꢁꢏꢒꢇꢈꢉꢀꢚ#ꢕ!Xꢀ?ꢀ„<"® beyond recommended capacity.  
Xꢏꢖꢏꢉꢍꢀꢑꢏꢊꢐꢍꢒꢀꢃꢄꢀꢓꢊꢖꢓꢀꢁꢂꢀꢐꢓꢂꢏꢄꢍꢂꢀꢂꢊꢈꢈꢇꢈꢉꢀꢒꢂꢄꢛꢀꢓꢊꢖꢓꢇꢈꢉꢀꢁꢂꢀꢐꢓꢂꢏꢄꢇꢈꢉꢀꢑꢏꢊꢐꢋꢇꢑꢀꢁꢂꢀ\ꢏꢖꢖꢏꢃꢆꢍꢀꢖꢏꢋꢍꢂꢇꢏꢆꢐꢛꢀꢁꢂꢀꢆꢏꢑꢘꢀꢁꢙꢀꢁꢂꢀꢃꢂꢁꢘꢍꢈꢀꢐꢋꢂꢏꢇꢈꢍꢂꢐꢔꢀ  
<ꢒꢒꢇꢋꢇꢁꢈꢏꢆꢀꢒꢏꢖꢏꢉꢍꢀꢋꢁꢀꢓꢏꢂꢋꢐꢀꢁꢂꢀꢑꢁꢖꢓꢁꢈꢍꢈꢋꢐꢀꢒꢊꢍꢀꢋꢁꢀꢑꢁꢈꢋꢇꢈꢊꢍꢒꢀꢊꢐꢍꢀꢏꢙꢋꢍꢂꢀꢁꢓꢍꢂꢏꢋꢇꢁꢈꢏꢆꢀꢓꢂꢁꢃꢆꢍꢖꢀꢁꢂꢀꢙꢏꢇꢆꢊꢂꢍꢀꢁꢑꢑꢊꢂꢐꢔꢀꢚꢌꢁꢊꢆꢒꢀꢁꢓꢍꢂꢏꢋꢇꢁꢈꢏꢆꢀꢓꢂꢁꢃꢆꢍꢖꢀꢁꢂꢀ  
failure occur, the product should not be used, but delivered as is to an authorized ECHO servicing dealer.  
It is a dealer’s and/or customer’s responsibility to complete and return the warranty registration card supplied with your ECHO product or by visiting  
WWW.ECHO-USA.COMꢔꢀZꢁꢊꢂꢀꢂꢍꢑꢍꢇꢓꢋꢀꢁꢙꢀꢓꢊꢂꢑꢌꢏꢐꢍꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢒꢏꢋꢍꢛꢀꢖꢁꢒꢍꢆꢀꢏꢈꢒꢀꢐꢍꢂꢇꢏꢆꢀꢈꢊꢖꢃꢍꢂꢀꢖꢊꢐꢋꢀꢃꢍꢀꢖꢏꢇꢈꢋꢏꢇꢈꢍꢒꢀꢏꢈꢒꢀꢓꢂꢍꢐꢍꢈꢋꢍꢒꢀꢋꢁꢀꢏꢈꢀꢏꢊꢋꢌꢁꢂꢇ%ꢍꢒꢀ  
ECHO servicing dealer for warranty service. Proof of purchase rests solely with the customer. Some states do not allow limitations on how long  
an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or  
ꢑꢁꢈꢐꢍ€ꢊꢍꢈꢋꢇꢏꢆꢀꢒꢏꢖꢏꢉꢍꢐꢛꢀꢐꢁꢀꢄꢁꢊꢀꢖꢏꢄꢀꢏꢆꢐꢁꢀꢌꢏꢗꢍꢀꢁꢋꢌꢍꢂꢀꢐꢓꢍꢑꢇꢅꢑꢀꢆꢍꢉꢏꢆꢀꢂꢇꢉꢌꢋꢐꢀꢎꢌꢇꢑꢌꢀꢗꢏꢂꢄꢀꢙꢂꢁꢖꢀꢐꢋꢏꢋꢍꢀꢋꢁꢀꢐꢋꢏꢋꢍꢔꢀ9ꢌꢇꢐꢀꢆꢇꢖꢇꢋꢍꢒꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢇꢐꢀꢉꢇꢗꢍꢈꢀꢃꢄꢀ!"#$ꢀ  
Incorporated, 400 Oakwood Rd., Lake Zurich, IL 60047.  
DISCLAIMER OF IMPLIED WARRANTIES  
9ꢌꢇꢐꢀꢆꢇꢖꢇꢋꢍꢒꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢇꢐꢀꢇꢈꢀꢆꢇꢍꢊꢀꢁꢙꢀꢏꢆꢆꢀꢁꢋꢌꢍꢂꢀꢍꢜꢓꢂꢍꢐꢐꢍꢒꢀꢁꢂꢀꢇꢖꢓꢆꢇꢍꢒꢀꢎꢏꢂꢂꢏꢈꢋꢇꢍꢐꢛꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢏꢈꢄꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢁꢙꢀ'@9?!ꢚꢚꢀ'$ꢕꢀ<ꢀ><ꢕ9@"B:<ꢕꢀ>Bꢕ>$ꢚ!ꢀ  
OR USE and any implied warranty of MERCHANTABILITYꢀꢁꢋꢌꢍꢂꢎꢇꢐꢍꢀꢏꢓꢓꢆꢇꢑꢏꢃꢆꢍꢀꢋꢁꢀꢋꢌꢇꢐꢀꢓꢂꢁꢒꢊꢑꢋꢔꢀ!"#$ꢀꢏꢈꢒꢀꢇꢋꢐꢀꢏꢙꢅꢆꢇꢏꢋꢍꢒꢀꢑꢁꢖꢓꢏꢈꢇꢍꢐꢀꢐꢌꢏꢆꢆꢀꢈꢁꢋꢀꢃꢍꢀ  
ꢆꢇꢏꢃꢆꢍꢀꢙꢁꢂꢀꢏꢈꢄꢀꢐꢓꢍꢑꢇꢏꢆꢀꢇꢈꢑꢇꢒꢍꢈꢋꢏꢆꢀꢁꢂꢀꢑꢁꢈꢐꢍ€ꢊꢍꢈꢋꢇꢏꢆꢀꢒꢏꢖꢏꢉꢍꢛꢀꢇꢈꢑꢆꢊꢒꢇꢈꢉꢀꢆꢁꢐꢋꢀꢓꢂꢁꢅꢋꢐꢔꢀ9ꢌꢍꢂꢍꢀꢏꢂꢍꢀꢈꢁꢀꢎꢏꢂꢂꢏꢈꢋꢇꢍꢐꢀꢍꢜꢋꢍꢈꢒꢍꢒꢀꢁꢋꢌꢍꢂꢀꢋꢌꢏꢈꢀꢏꢐꢀꢓꢂꢁꢗꢇꢒꢍꢒꢀꢌꢍꢂꢍꢇꢈꢔꢀ  
9ꢌꢇꢐꢀꢆꢇꢖꢇꢋꢍꢒꢀꢎꢏꢂꢂꢏꢈꢋꢄꢀꢖꢏꢄꢀꢃꢍꢀꢖꢁꢒꢇꢅꢍꢒꢀꢁꢈꢆꢄꢀꢃꢄꢀ!"#$ꢔ  
99922201032  
11/18/2011  
X7531125002  
33  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
PB-760 LN H/T  
NOTES  
34  
X7531125002  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PB-760 LN H/T  
NOTES  
X7531125002  
35  
© 03/2013 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(T) P39611001001/P39611999999  
(T) P37912002001/P37912999999  
(H) P39511001001/P39511999999  
(H) P37812002001/P37812999999  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Extron electronic Power Supply VSC 100 User Manual
Extron electronic Stereo System CTL Cable User Manual
Fisher Paykel Cooktop CT2802 User Manual
Fluke Thermometer 5626 5628 User Manual
Flymo Trimmer Edger And Trimmer User Manual
FujiFilm Camera Lens DV10X7B SA2 User Manual
Garland Range C836 FMD User Manual
GE Mixer 169160 User Manual
GE Washer Dryer WSM2480T User Manual
Gitzo Camcorder Accessories GT2540G User Manual