Platine Noirée
High Fidelity 7.1 Surround Sound
User's Manual
Sound That Will Move You.
Download from Www.Somanuals.com. All Manuals Search And Download.
PN-4521 Tower Speaker System
W = 6"
D = 11"
* Magnetically shielded
* 24dB/oct high pass 18dB/oct low pass
* Enclosure type:
passive radiator bass reflex system
* Woofers:
Four 4" high power poly cone drivers
* Passive Radiator:
One 10" SLAPS
* Tweeters:
Two 1" high definition silk dome
* Power handling:
500 watts
* Sensitivity:
89dB @ 1W/1M
* Bandwidth:
20Hz to 35kHz.
* Net weight:
47 Lbs.
Ohm
- dBSPL
Distance Loudspeaker - mic: 104.3 cm dBSPL normalized on 1 Meter
PN-4521 Tower
1W
/
1M
100
90
56
48
40
32
24
16
8
(88.9 dB Diff:0.01)
80
70
60
(Impedance Curve)
50
40
20
30
50
100
200
500
1k
2k
3k
5k
10k
20k 30kHz
PN-4421 Center Speaker System
W = 28"
D = 11"
* Magnetically shielded
* 24dB/oct high pass 18dB/oct low pass
* Enclosure type:
passive radiator bass reflex system
* Woofers:
Four 4" high power poly cone drivers
* Passive Radiator:
One 10" SLAPS
* Tweeters:
Ohm
- dBSPL
Distance Loudspeaker - mic: 104.3 cm dBSPL normalized on 1 Meter
PN-4421 Centre
1W
/
1M
100
90
Two 1" high definition silk dome
* Power handling:
500 watts
* Sensitivity:
89dB @ 1W/1M
* Bandwidth:
20Hz to 35kHz.
* Net weight:
56
48
40
32
24
16
8
(89 dB Diff:0.01)
80
70
60
(Impedance Curve)
50
40
47 Lbs.
20
30
50
100
200
500
1k
2k
3k
5k
10k
20k 30kHz
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PN-1411 Monitor Speaker System
W = 12.5"
D = 7"
* Magnetically shielded
* 24dB/oct high pass 18dB/oct low pass
* Enclosure type:
port tuned bass reflex system
* Woofers:
One 4" high power poly cone driver
* Passive Radiator:
N/A
- dBSPL
1W / 1M
* Tweeters:
100
90
80
70
60
50
40
One 1" high definition silk dome
* Power handling:
200 watts
* Sensitivity:
88dB @ 1W/1M
* Bandwidth:
40Hz to 35kHz.
* Net weight:
13 Lbs.
PN-2421 Dipole Speaker Sys
W = 14"
D = 7"
* Magnetically shielded
* 24dB/oct high pass 18dB/oct low pass
* Enclosure type:
port tuned bass reflex system
* Woofers:
Two 4" high power poly cone driver
* Passive Radiator:
N/A
Ohm
- dBSPL
1W / 1M
Distance Loudspeaker - mic: 104.3 cm dBSPL normalized on 1 Meter
PN-2421 Dipole
* Tweeters:
56
48
40
32
24
16
8
100
90
80
70
60
50
40
Two 1" high definition silk dome
* Power handling:
200 watts
* Sensitivity:
89dB @ 1W/1M
* Bandwidth:
40Hz to 35kHz.
(87.6 dB Diff:0.01)
(Impedance Curve)
* Net weight:
20
30
50
100
200
500
1k
2k
3k
5k
10k
20k 30kHz
15 Lbs.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PN-2515 Universal Speaker System
D = 8.5"
W = 18.625"
* Magnetically shielded
* 24dB/oct high pass 18dB/oct low pass
* Enclosure type:
port tuned bass reflex system
* Woofers:
Two 5.25" Magnetically shielded, high power poly cone driver
* Passive Radiator:
N/A
* Tweeters:
One 1.5" high definition silk dome
* Power handling:
300 watts
* Sensitivity:
89dB @ 1W/1M
* Bandwidth:
30Hz to 35kHz.
* Net weight:
17.90 Lbs.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Planning Your Home Entertainment System
The Platine Noiree system is perfectly matched for use in 7.1 multi-channel home theater systems; they can also be
used in standard two-channel stereo configurations.
Speaker placement is of utmost importance in order to optimize the performance of your home theater system. The
diagram below illustrates a 7.1 surround system using the Platine Noiree speakers in conjunction with one MiniMe 8"
subwoofer. The Platine Noiree speakers can be used in more complex surround sound systems that are not covered in
this manual. A true 7.1 home theater surround system integrates closely matched components with a subwoofer, in
order to accurately reproduce all the details and dynamic range of music. The Platine Noiree speakers are designed
particularly for such applications. In this case the MiniMe subwoofer will complete your 7.1 system. It is recommended
that you use one or more subwoofers toperfectly match your systemforthe ultimate in low frequency effects.
Also available for purchase is the PN-2515 universal speaker. This unit allows users to substitute or complement any
other speaker in your system, delivering a wider range of mid-bass and high frequency effects. In addition, the PN-2515
can be hung on walls for plasma theaters or space challenged rooms. This deeper style plasma speaker delivers much
better sound quality than commonly sold plasma speakers.
PN-1411 shielded rear monitor speakers
PN-2421 shielded dipole speakers
PN-4421 shielded center speaker
PN-4521 shielded tower speakers
PN-2515 shielded universal speakers
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Five Years Limited Warranty
Five (5) year limited warranty:
Earthquake warrants the original purchaser that all Factory Sealed New Audio Products be free from defects in
material and workmanship under normal and proper use for a period of five (5) years from the date of purchase (as shown on
the original bill of sale with serial number affixed/written on it). The five (5) year warranty period is valid only if an authorized
Earthquake dealer properly installs the product and the warranty registration card is properly filled out and sent to Earthquake
Sound Corporation. Ifa non-authorized party installs the product a ninety (90) day warranty period will be applied.
(A) Five (5) years limited warranty plan coverage guidelines:
• First year: Earthquake pays for labor, parts, and return ground freight (only in US mainland, not including Alaska,
Hawaii and Puerto Rico).
• Second year: Earthquake pays for labor and parts only, customer must pay freight both ways.
• Third, fourth & fifth year: Earthquake pays for labor only. Customer must pay for parts and freight both ways.
(B) Warning:
Products (sent for repair) that are tested by Earthquake technicians and deemed to have no problem(s) will not be
covered by the five (5) year limited warranty. Customer will be charged a minimum of one (1) hour of labor (ongoing
rates) plus shipping charges back tocustomer.
(C) Earthquake will repair or replace - at our option - all defective products/parts subject to the following
provisions:
• Defective products/parts have not been altered or repaired by other than an Earthquake factory approved technician.
• Products/parts are not subjected to negligence, misuse, improper use, or accident, damaged by improper line voltage,
used with incompatible products, or have its serial number or any part of it altered, defaced or removed, or have been
used in any way that is contrary to Earthquake's written instructions.
(D) Warranty Limitations:
Warranty does not cover products that have been modified or abused. Including but not limited to the following:
• Damages to speaker cabinet and cabinet finish due to misuse, abuse, or use of improper use of cleaning
materials/methods.
• Bent speaker frame, broken speaker connectors, holes in speaker cone, surround & dust cap, burnt speaker voice coil.
• Fading, deterioration of speaker components & finish due to improper exposure to elements.
• Bent amplifier casing, damaged finish on the casing due to abuse, misuse, or improper use of cleaning material.
• Burnt traces on PCB.
• Product/part damaged due to poor packaging or abusive shipping conditions.
• Subsequent damage to other products.
A warranty claim will not be valid if the warranty registration card is not properly filled out & returned to Earthquake with a
copy of the sales invoice.
(E) Service Request:
To receive product/s service, contact Earthquake's service department at (510) 732-1000 and request an RMA
number (Return MaterialAuthorization); items shipped without a valid RMAnumber will be refused. Make sure you provide us
with your complete/correct shipping address, a valid phone number, and a brief description of the problem you are
experiencing with the product. In most cases, our technicians might be able to resolve the problem over the phone, thus
eliminating the need toship the product.
(F) Shipping Instructions:
Product/s must be packaged in its original protective box(s) to minimize transport damage. Shipping claims
regarding items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse
any products improperly packed. Original bill of sale must accompany product returned for service. We encourage you to
include with the package a written description of the problem. Ship product to: Earthquake Sound Corp. 2727 Mc Cone
Avenue, Hayward, CA 94545. Ph (510) 732-1000. You are responsible for the cost of shipping the product to Earthquake
Sound Corporation.
(G) Disputes Resolution:
All disputes - between clients and Earthquake Sound Corporation - resulting from the five (5) years limited
warranty policy must be resolved according tothe laws & regulations of the county ofAlameda -California.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound That Will Move You.
Earthquake Sound reserves the right to amend details of the specifications without notice.
Copyright © Earthquake Sound Corporation
Earthquake Sound Corporation • 2727 McCone Avenue Hayward, CA 94545
Phone: 510-732-1000 Fax: 510-732-1095
Download from Www.Somanuals.com. All Manuals Search And Download.
|