Flex
USER MANUAL
PG-2091F USER MANUAL VER:NEW ISSUE
1
OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Appearance
Read / replace key
Setting / selection key
Function key
2. Features and Icon Definitions
(a) Features
◆ 12 audio alerts
◆ Vibration alert
◆ 3 alarm settings
◆ 4 address codes
◆ 15 message memory protection / 20 total
◆ 18 characters reception
◆ Manual frequency and address code programming
◆ Low battery indication
◆ Duplicate and unread message indication
◆ Message full indication
(b) Icon Definitions
‹
Menu indication icons
Sound alert mode is on
Mute / vibration mode is on
Alarm is on
‹
Message status display icons
Message serial number and resource indication icon
PG-2091F USER MANUAL VER:NEW ISSUE
3
OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Message protection \ lock icon
Message continued icon
Duplicate message icon
‹
Function selection icons
Time setting
Sound alert setting
Mute / vibration mode setting
Alarm setting
Message deletion
‹
Other display icons
Low battery warning
Blinking when out of receiving area
3. Turning on the pager
‹
After installing the battery, the pager will give out an audio or vibration alert. Press the Read
/ replace key then time and date will be displayed on the screen.
‹
Turn on the pager to display:
‹
‹
Standby mode display while the pager is on audio alert
Standby mode display while the pager is on vibration alert
Now your pager is in standby mode and can receive messages at any time.
In standby mode with date displaying, press the setting / selection key
week as follows:
‹
to display the
Press the setting / selection key
to select date or week as the standby mode display.
‹
Standby mode display while the pager is turned off:
PG-2091F USER MANUAL VER:NEW ISSUE
4
OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the pager, press the function key
to select the “OFF?” function. Then press the
setting /selection key
to turn off the pager.
4. Various functions
In standby mode, press the function key
to start function selection. Press the function key
repeatedly till desired function is displayed on the menu, then press the setting /selection
key
to confirm that function.
‹
‹
‹
‹
‹
‹
‹
“SET ALERT?” function. Please consult “Alert setting”.
“OFF?” function.
“SET TIME?” function. Please consult “Time setting”.
“SET DATE?” function. Please consult “Date setting”.
“SET AUDIO?” function. Please consult “Audio alert setting”.
“SET ALARM?” function. Please consult “Alarm setting”.
“CLEAR ALL?” function. Please consult “Delete message”.
PG-2091F USER MANUAL VER:NEW ISSUE
5
OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
[If no message, all messages locked, or all messages unread, “CLEAR ALL?” function will
not be displayed in function options.]
Note: If you want to exit from functions selection without any changes, please press the Read
/ replace key
. The pager will automatically return to standby mode display in 8
seconds if no keys are pressed.
4.1. Receive and read messages
‹
Press the Read / replace key
to read messages. If there’s no message stored in the
pager, “NO PAGES” will be displayed .
‹
When the pager has received messages, the number of unread messages will be displayed as
follows:
This display indicates 2 unread messages. An unread messages alert will remind you of
unread messages. The number at the bottom left corner shows the number of received
message. Press the read / replace key
to display the message.
◆ The first part of the message [ received message: 861 579 0234, time received: 13:53 noon of
April 27.]
The number at the bottom left corner shows its the 8th message. Press the Read / replace key
again to display time and date the message was received.
The number at the bottom left corner shows the 1st address code .
‹
‹
Press the setting /selection key
to read the next message.
At any time when you are reading messages, pressing the function key
for 5 seconds to
return to standby mode. Your pager can automatically store received messages along with
their time and date. When stored memory is full, “MEMORY FULL” indication will be
displayed in standby mode . Receiving of any new message will lead to permanent deletion
of the oldest and unlock message.
PG-2091F USER MANUAL VER:NEW ISSUE
6
OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
If the pager is full of unread messages and one unread message has been deleted by a new
received message, an “OVERFLOW” indication will be displayed on the pager.
If the pager receives a duplicate message repeatedly, a duplicate message icon will be
displayed to show that the message is a dupliate one. Under such a circumstance, the
receiving time of the message will be updated to the latest. If it’s the same message from
different resources, the two messages will not be regarded as the duplicate.
4.2. Message protection and unlock
You can “lock” or “protect” maximum of 15 messages from being deleted by the new
message when memory overflows.
‹
In order to lock or protect a message, press the function key
while reading the message.
When “PROTECT?” emerges on the display, press the setting /selection key
message. The lock icon shows that the message has been locked.
to lock the
‹
In order to unlock a message, press the function key
first, then press the setting /selection
key to unlock the message while reading the message.
Note: “FULL” indication will be displayed when you press the setting /selection key
to
protect one more message while already having 15 messages locked.
4.3. Messages deleting selectively
‹
In order to selectively delete messages, press the function key
unlocked messages. Then “DELETE?” indication will be displayed .
twice while reading
PG-2091F USER MANUAL VER:NEW ISSUE
7
OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
‹
Press the setting /selection key
to confirm the selective deletion.
4.4. Delete messages
The pager has two way of deleting messages.
1) Select “CLEAR ALL?” function to delete all read and unlock messages.
2) Select “DELETE?” selectively deleting function to delete some read message.
Press the setting /selection key
to confirm all unlocked read message will be deleted.
Note: “CLEAR ALL?” function will not be displayed in function selection items under the
following circumstances:
1) No message stored.
2) All messages unread.
3) All messages have been read and locked.
4.5. Time setting
‹
Press the function key
to display:
1) Press the setting /selection key
to move cursor from one blinking position to another.
The order is [ HH—>MM—>A / P—>12Hr/24Hr.]
2) Press the function key
to adjust the digit to the current time.
‹
‹
Repeat step 1 and 2 in every position to adjust to correct time.
Press the Read / replace key
to confirm your setting.
4.6. Date setting
‹
Press the fumction key
to display:
‹
‹
Press the setting /selection key
Press the setting /selection key
is [MM—DD—YY].
to enter date setting mode.
to move from one blinking position to another. The order
‹
Press the function key
to adjust the digit in every position to correct date.
PG-2091F USER MANUAL VER:NEW ISSUE
8
OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
‹
‹
Repeat above steps in every position to adjust to correct date.
Press the Read / replace key at any time to confirm your setting .
4.7. Alert setting
◆ Press the function key
to display:
In the “SET ALERT” function, you can select the following 3 kinds of alert:
1) AUDIO alert - Press the Setting / selection key to set audio alert; or press the function
key to enter next option.
2) MOTOR alert - Press the Setting / selection key
key to enter next option.
to set vibration alert; or press the function
3) MUTE alert - Press the Setting / selection key
to confirm mute alert and enter mute
receiving time setting. In this mode, the received message will only display on the menu
without sound or vibration.
4.8. Audio alert setting
◆ Press the function key
to display:
In the “SET AUDIO?” function, you can select one alert from the 5 alerts or 12 melody alerts
for receiving messages or turning on the pager.
‹
‹
When “SET AUDIO?” function displayed on the screen, press setting /selection key
Press the function key
give out example alert for about 2 seconds.
.
untill you get your desired alert.After each selection, the pager will
‹
Press the Setting / selection key
to confirm your selection.
PG-2091F USER MANUAL VER:NEW ISSUE
9
OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
or
Note: if your pager is in mute or motor status, “SET AUDIO?” function will not appear in
function selection items.
4.9. Time setting of mute receiving
You may set mute receiving time for 1 to 10 hours. By the time the pager will give out short
alert and change to sound alert receiving mode. Or set permanent mute receiving until
resetting other alert mode.
This shows permanent mute receiving. Press the setting /selection key
setting or press the function key to enter next option.
to confirm this
It shows 1 hour mute receiving. The pager will give out short alert 1 hour later and enter
sound alert receiving mode. Press the setting /selection key to confirm this setting or
press the function key
to enter next option
4.10. Alarm setting
Alarm function may be used for everyday alarm or dating reminder.
In “SET ALARM?” function, press the setting /selection key to enter alarm setting mode.
‹
‹
Press the function key
to select from alarm 1 , 2 or 3.
‹
‹
‹
Press the Setting / selection key
to confirm your selection.
Press the function key
to select turning the alarm ON/ OFF.
Press the setting /selection key
to move to the position needed changing, then press the
function key
Repeat the above steps in every position to adjust the alarm time.
Press the read / replace key to confirm your alarm setting.
to adjust the alarm time.
‹
‹
Alarm icon in standby mode or OFF mode shows an alarm is ON. Alarm icon will not display
when all alarm released.
PG-2091F USER MANUAL VER:NEW ISSUE
10 OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
The pager will give out alert and display “ALARM” indication and flashing alarm ON icon
when any alarm rings at set time.
Note: You can set maximum of 3 alarms. Alarm 1 and 2 is for everyday timed alarm; alarm 3
is for dating reminder, only ringing once at some set time and not repeating ringing the next
day.
5. Attentions:
‹
‹
‹
Avoid humidity, high temperature, magnetic field and fierce bumping.
Please sent to service center for repair.
Do not attempt to open the pager for repair .
United Communications Corporation
888-763-7550
PG-2091F USER MANUAL VER:NEW ISSUE
11 OF 11
Download from Www.Somanuals.com. All Manuals Search And Download.
|