U B 2 2 z S p e c i f i c a t i o n s
2-WAY COMPACT FULL-RANGE
See NOTES TABULAR DATA for details
CONFIGURATION
Subsystem
Transducer
LF 2x 5.25 in cone
Loading
Sealed
HF 1x 1 in exit, 1 in voice
CD horn
coil compression driver
Operating Mode
Amplifier Channels
Single-amp LF/ HF
PERFORMANCE 1
External Signal Processing
HPF
Operating Range
85 Hz to 20 kHz
Nominal Beamwidth (rotatable)
Horz 120°
Vert 50°
Axial Sensitivity (whole space SPL)
LF/HF 91 dB
85 Hz to 20 kHz
Input Impedance (ohms)
Nominal
Minimum
7.5 @ 280 Hz
LF/HF
Input Taps (MT versions)
70 V
LF/HF 64 W / 32 W / 16 W
High Pass Filter
High Pass =>55 Hz, 12 dB/octave Butterworth
Accelerated Life Test 2
8
100 V
64 W / 32 W
DESCRIPTION
• Ultra-compact 2-way system
• Wide projection pattern
• LF on angled baffles to maintain a wide upper/midrange beamwidth
• High output, high definition sound
LF/HF 40 V
Calculated Axial Output Limit (whole space SPL)
Average
LF/HF 114 dB
ORDERING DATA
Description
UB22z 2-Way Full-Range Loudspeaker Black
UB22z 2-Way Full-Range Loudspeaker White
UB22zMT w/64 W Xfmr Black
UB22zPL-WP Weather-protected
UB22zMTPL-WP Weather-protected w/64 W Xfmr 0013735
Optional Accessories
200 W @ 8 ohm
Peak
120 dB
Part Number
0013733
0017844
0013734
0013736
DESCRIPTION
The UB22z is engineered for extra-wide-angled coverage
(horizontal) from a wall mounted position. This ultra-compact
loudspeaker provides surprisingly high output and exceptional
fidelity for near field applications. It is highly effective as a fill/delay
element in larger overall systems or for foreground/background
music reproduction as a stand-alone loudspeaker or in distributed
systems.
Aluminum U-bracket Kit Black
Aluminum U-bracket Kit White
0015342
0015830
Because they are compact and lightweight, UB22zs install quickly
and easily in difficult spaces. As components of larger overall
systems, the UB22z series can be used to provide underbalcony,
overbalcony, and side box area coverage. Applications as fill/delay
elements include large and small theatres and houses of worship.As
a main system, they can be built into high definition, distributed
systems for use in industrial or retail environments and as
standalone or distributed loudspeakers for boardrooms, restaurants,
offices, and transportation centers.
Foam-backed grilles hide the drivers from view for pleasing
aesthetics. Side mounting points allow enclosures to be mounted in
using accessory brackets. Additional mounting points accept an
OmniMount® 30.0 Series or similar bracket. Standard colors are
black and white. Other colors can be specified as a special order
items.
Six year warranty.
1 To achieve specified performance, the listed external signal processing with EAW-provided settings is required.
2 For recommendations to select power amplifier size refer to : “HOW MUCHAMPLIFIER POWER DO I NEED?” on the EAW web site.
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0392 (A) UB22z July 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
U B 2 2 z S p e c i f i c a t i o n s
PERFORMANCE DATA
See NOTES GRAPHIC DATA for details
Frequency Response: Processed
Single-amp = blue
10
0
-10
-20
-30
-40
-50
10
100
1000
20000
Frequency (Hz)
Frequency Response: Digital Signal Processor
Frequency Response: Unprocessed
Single-amp = blue
Single-amp = blue
120
110
100
90
20
10
0
-10
-20
-30
-40
80
70
60
10
100
1000
20000
10
100
1000
20000
Frequency (Hz)
Frequency (Hz)
Impedance Magnitude
Beamwidth (-6 dB SPL Points)
Horizontal = orange Vertical = black
400
LF = green, MF/HF = black, Single-amp = blue
100
100
10
1
10
1
10
100
1000
20000
100
1000
20000
Frequency (Hz)
Frequency (Hz)
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0392 (A) UB22z July 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
U B 2 2 z S p e c i f i c a t i o n s
HORIZONTAL POLAR DATA (Gridlines: 6 dB axial / 15 degree radial)
See NOTES GRAPHIC DATA for details
100 Hz
125 Hz
160 Hz
200 Hz
1600 Hz
2000 Hz
2500 Hz
3150 Hz
90
90
135
45
135
45
180
0
0
0
180
0
0
0
-135
-45
-135
-45
-90
90
-90
90
250 Hz
315 Hz
400 Hz
500 Hz
4000 Hz
5000 Hz
6300 Hz
8000 Hz
135
45
135
45
180
180
-135
-45
-135
-45
-90
90
-90
90
630 Hz
800 Hz
10000 Hz
12000 Hz
16000 Hz
1000 Hz
1250 Hz
135
45
135
45
180
180
-135
-45
-135
-45
-90
-90
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0392 (A) UB22z July 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
U B 2 2 z S p e c i f i c a t i o n s
VERTICAL POLAR DATA (Gridlines: 6 dB axial / 15 degree radial)
See NOTES GRAPHIC DATA for details
1600 Hz
2000 Hz
2500 Hz
3150 Hz
100 Hz
125 Hz
160 Hz
200 Hz
90
90
135
45
135
45
180
0
0
0
180
0
0
0
-135
-45
-135
-45
-90
90
-90
90
250 Hz
315 Hz
400 Hz
500 Hz
4000 Hz
5000 Hz
6300 Hz
8000 Hz
135
45
135
45
180
180
-135
-45
-135
-45
-90
90
-90
90
630 Hz
800 Hz
10000 Hz
12000 Hz
16000 Hz
1000 Hz
1250 Hz
135
45
135
45
180
180
-135
-45
-135
-45
-90
-90
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0392 (A) UB22z July 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
U B 2 2 z S p e c i f i c a t i o n s
INPUT PANEL
SIGNAL DIAGRAM
2-Way, Single-Amp (LF/HF)
HF
LF
XVR
HPF
AMP
WHITINSVILLE, MA USA
UB22z
S/N
2-Way, Single-Amp (LF/HF)
HF
LF
100V
COM
32W
64W
NC
70V
COM
16W
32W
64W
70 V / 100 V
AMP
XVR
HPF
WHITINSVILLE, MA USA
UB22zMT
S/N
LEGEND
DSP:
HPF:
LPF:
User-supplied Digital Signal Processor.
High Pass Filter for crossover or Recommended High Pass Filter.
Low Pass Filter for crossover.
LF/MF/HF: Low Frequency / Mid Frequency / High Frequency.
AMP:
XVR:
User-supplied Power Amplifier.
Passive LPFs, HPFs, and EQ integral to the loudspeaker.
NOTES
TABULAR DATA
1. Measurement/Data Processing Systems: Primary - FChart: proprietary EAW software; Secondary - Brüel & Kjær 2012.
2. Microphone Systems: Earthworks M30; Brüel & Kjær 4133
3. Measurements: Dual channel FFT; length: 32 768 samples; sample rate: 48 kHz; logarithmic sine wave sweep.
4. Measurement System Qualification (includes all uncertainties): SPL: accuracy +/-0.2 dB @ 1 kHz, precision +/-0.5 dB 20 Hz to 20 kHz, resolution 0.05 dB; Frequency: accuracy +/-1 %,
precision +/-0.1 Hz, resolution the larger of 1.5 Hz or 1/48 octave; Time: accuracy +/-10.4 µs, precision +/-0.5 µs, resolution 10.4 µs;Angular: accuracy +/-1°, precision +/-0.5°, resolution 0.5°.
5. Environment: Measurements time-windowed and processed to eliminate room effects, approximating an anechoic environment. Data processed as anechoic or fractional space, as noted.
6. Measurement Distance: 7.46 m.Acoustic responses represent complex summation of the subsystems at 20 m. SPLis referenced to other distances using the Inverse Square Law.
7. Enclosure Orientation: For beamwidth and polar specifications, as shown in Mechanical Specification drawing.
8. Volts: Measured rms value of the test signal.
9. Watts: Per audio industry practice, “loudspeaker watts” are calculated as voltage squared divided by rated nominal impedance. Thus, these are not True Watt units of energy as defined by
International Standard.
10. SPL: (Sound Pressure Level) Equivalent to the average level of a signal referenced to 0 dB SPL= 20 microPascals.
11. Subsystem: This lists the transducer(s) and their acoustic loading for each passband. Sub = Subwoofer, LF = Low Frequency, MF = Mid Frequency, HF = High Frequency.
12. Operating Mode: User selectable configurations. Between system elements, a comma (,) = separate amplifier channels; a slash (/) = single amplifier channel. DSP= Digital Signal Processor.
IMPORTANT: To achieve the specified performance, the listed external signal processing must be used with EAW-provided settings.
13. Operating Range: Range where the processed Frequency Response stays within -10 dB SPLof the power averaged SPLwithin this range; measured on the geometric axis. Narrow band
dips are excepted.
14. Nominal Beamwidth: Design angle for the -6 dB SPLpoints, referenced to 0 dB SPLas the highest level.
15. Axial Sensitivity: Power averaged SPLover the Operating Range with an input voltage that would produce 1 W at the nominal impedance; measured with no external processing on the
geometric axis, referenced to 1 m.
16. Nominal Impedance: Selected 4, 8, or 16 ohm resistance such that the minimum impedance point is no more than 20% below this resistance over the Operating Range.
17. Accelerated Life Test: Maximum test input voltage applied with an EIA-426B defined spectrum; measured with recommended signal processing and Recommended Protection Filter.
18. CalculatedAxial Output Limit: Highest average and peak SPLs possible during theAccelerated Life Test. The Peak SPLrepresents the 2:1 (6 dB) crest factor of the Life Test signal.
19. High Pass Filter: This helps protect the loudspeaker from excessive input signal levels at frequencies below the Operating Range.
GRAPHIC DATA
1. Resolution: To remove insignificant fine details, 1/12 octave cepstral smoothing was applied to acoustic frequency responses and 1/3 octave cepstral smoothing was applied to the
beamwidth and impedance data. Other graphs are plotted using raw data.
2. Frequency Responses: Variation in acoustic output level with frequency for a constant input signal. Processed: normalized to 0 dB SPL. Unprocessed inputs: 2 V (4 ohm nominal impedance),
2.83 V (8 ohm nominal impedance), or 4 V (16 ohm nominal impedance) referenced to a distance of 1 m.
3. Processor Response: The variation in output level with frequency for a constant input signal of 0.775 V = 0 dB reference.
4. Beamwidth:Average angle for each 1/3 octave frequency band where, starting from the rear of the loudspeaker, the output first reaches -6 dB SPLreferenced to 0 dB SPLas the highest
level. This method means the output may drop below -6 dB SPLwithin the beamwidth angle.
5. Impedance: Variation in impedance magnitude, in ohms, with frequency without regard to voltage/current phase. This means the impedance values may not
be used to calculate True Watts (see 9 above).
6. Polar Data: Horizontal and vertical polar responses for each 1/3 octave frequency band 100 Hz to 16 kHz or Operating Range.
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0392 (A) UB22z July 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
|