INSTRUCTION MANUAL
18V
• Hong Kong • Shanghai
CBL18
York • Verona • London • Paris
Download from Www.Somanuals.com. All Manuals Search And Download.
051027 ED2 DCR
Dear Customer
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Wear eye protection.
Wear hearing protection.
Wear breathing protection.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Conforms to relevant standards for
electromagnetic compatibility.
Specifications
Charger:
230–240Vac ~ 50 Hz
18V
Nominal battery voltage:
Battery pack:
Charge time:
No-load speed:
Blow speed:
2 x 18V, 1.2Ah
1 hour
13000 min
-1
180 km/h
2.6 kg
Weight:
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal safety
Safety instructions
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
WARNING. Read and understand all instructions.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury. The term
“power tool” in all of the warnings below refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power
tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached to
a rotating part of the power tool may result in personal
injury.
Save these instructions
Work area
• Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used. Use of these devices
can reduce dust-related hazards.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of
electric shock.
Power tool use and care
• Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Additional safety rules for blowers
• Always wear adequate protective clothing when
operating the tool to avoid injuries to face, eyes, hands,
feet, head or hearing. Use safety glasses or a face
shield, high boots or sturdy shoes, long trousers, work
gloves, a hard hat and ear defenders.
• Do not start the tool when it is upside down or when it
is not in the operating position.
• Switch the motor off and remove the battery when the
tool is not being used, left unattended, being cleaned,
being moved from one place to another.
• Do not operate the tool near people, especially children
or pets. Turn it off if they get too close. Maintain a safe
distance of at least 5m from other people when using
the tool.
• Never direct the blower tube towards bystanders or pets.
Never blow debris in the direction of bystanders or pets.
• Do not handle the battery or the tool with wet hands
and do not use the tool in the rain.
• Keep all the air intakes and the blower tube free of
dust, lint, hair and other material that may cause a
reduction in air flow.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from intended could result in a
hazardous situation.
• Keep a balanced and stable stance while using the tool.
• Do not switch on the tool in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gasses and
powders.
• Only operate the tool during broad daylight or with
adequate artificial light.
Service
• Have your power tool serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
• When the tool is not in use, store it in a dry place and
out of reach of children.
• After use, remove the battery pack and check for
damage. If you have the slightest doubts, contact an
authorised service centre.
• Only use the tool according to the instructions given in
this manual.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
• Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other
conditions that may affect it’s operation. A tube or
other part that is damaged should be properly repaired
or replaced by an authorised service agent.
• Use only spare parts and accessories recommended by
the manufacturer.
• The charger and battery packs supplied with it are
specifically designed to work together. Do not attempt
to charge the battery pack with any other charger than
the one supplied.
• Do not place any object on top of the charger as it
could cause overheating. Do not place the charger near
any heat source.
• Do not try to repair the tool or access internal parts.
Contact authorised service centres only.
• Do not pull on the lead of the charger to disconnect it
from the power source.
• Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
tool when you are tired, sick or under the influence of
alcohol or other drugs.
• Make sure that the charger cable is positioned where
it will not be stepped on, tripped over or otherwise
subjected to damage or stress.
• Do not use an extension cord unless it is absolutely
necessary. The use of an improper extension cord could
cause the risk of fire, electric shock or electrocution.
• Do not use the charger if it has been subjected to a
heavy knock, dropped or otherwise damaged in any
way. Take the charger to an authorised service centre for
a check or repair.
• Keep a balanced and stable stance while using the tool.
• Do not operate this appliance with long loose hair or
loose fitting jewellery. Tie long loose hair back and
remove loose fitting jewellery.
• Do not use the blower on gravel surfaces.
Additional safety rules for the charger
• Before using the charger, read all the instructions and
cautionary markings on the charger and battery pack as
well as the instructions on using the battery pack.
• Do not disassemble the charger. Take it to an authorised
service centre when service or repair is required.
Incorrect re-assembly may result in the risk of fire,
electric shock or electrocution.
• Only charge your batteries indoors as the charger is
designed for indoor use only.
• DANGER. If the battery pack is cracked or damaged in
any other way, do not insert it in the charger. There is a
danger of electric shock or electrocution.
• To reduce the risk of an electric shock, unplug the
charger from the power supply before attempting to
clean it. Removing the battery alone does not reduce
the risk.
• Never attempt to connect two chargers together.
• WARNING. Do not allow any liquid to come into contact
• Do not store or use the tool and battery pack in
locations where the temperature may reach or exceed
104°F (40°C) such as alongside sheds or metal
structures in the summer.
• The charger is designed for use from a standard
household electrical supply (230–240 volts). Do not
attempt to connect the charger to a supply with a
different supply.
with the charger. There is a danger of electric shock.
• To allow the battery pack to cool down after charging,
do not place it in a hot environment such as a metal
shed or open trailer left in the sun.
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you wish to charge a second battery pack, unplug the
charger from the mains supply and leave it for at least
15 minutes. After this time you can charge a second
battery pack.
• The battery pack utilizes nickel-cadmium cells.
Cadmium is considered to be a toxic material. Use an
environmentally safe disposal unit at a municipal waste
disposal centre to dispose of a damaged or worn
out battery.
Additional safety rules for the battery pack
• The battery pack for this tool has been shipped in a low
charge condition. You should charge the battery pack
fully before use.
• Ensure the switch is in the off position before inserting
battery pack. Inserting the battery pack into power tools
that have the switch on invites accidents.
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing. If
you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
• Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk
of injury and fire.
• To ensure the longest battery life and best battery
performance, always charge the battery when the air
temperature is between 18–24°C. Do not charge the
battery pack when the temperature is below 0°C, or
above 40°C. This is important. Failure to observe
this safety rule could cause serious damage to the
battery pack.
• When battery pack is not in use keep it away from other
metal objects like paper clips, coins, keys, nails, screws
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
• Do not incinerate the battery pack even if it is seriously
damaged or can no longer hold a charge. The battery
pack can explode in a fire.
• Never attempt to open the battery pack for any reason.
If the plastic housing of the battery pack breaks open
or cracks, immediately discontinue its use and do not
recharge it.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your product
Before using the cordless blower, familiarise yourself with
all the operating features and safety requirements.
3
1
1. On/off trigger switch
4
5
2
8
Download from Www.Somanuals.com. All Manuals Search And Download.
pack is receiving a “Fast
Charge”.
4. After approximately one
hour, the “Fast Charge”
Fitting and removing the battery pack
To remove the battery pack from the blower firmly press
the battery release tabs (4) at either side of the battery
pack, and slide the battery backward out of the tool.
indicator red light (b) should
To install the battery pack,
align rails, on the tool with the
tabs on the battery pack and
slide the battery pack on to
the blower. Ensure the battery
pack is sitting straight on the
foot and correctly entering the
runners. The battery should
slide fully on to the drill foot
until the battery pack “clicks”
into position.
go out indicating that the
battery pack is fully charged
and that the charger is now
in a “Maintenance Charge”
mode, this is confirmed by the light (a) coming back
on. The battery pack can be left on “Maintenance
Charge” until you are ready to use it, however it is not
recommended to leave the battery on charge for longer
that 24 hours.
5. To remove the battery pack from the charger depress the
battery pack release tabs (4) and slide the battery off.
WARNING. Do not leave batteries charging for longer than
24 hours. Note. Depending on room temperature, line
voltage, and existing charge level, initial battery charging
may take longer than one hour.
b
a
Battery charging
1. Connect charger (5) to
power source. The green light
(a), should light up. This
indicates the charger is ready
to begin charging.
NOTE. Disconnect charger from power source when not
in use.
2. Position battery pack on
charger, align rails (d), on
battery charger with (e) on
battery pack. Slide battery
forward onto charger until it
clicks into position.
To obtain the best life for the battery
• Never allow the drill to come to a complete stand still
before recharging. The battery should be placed on
charge whenever the battery is noticeably running
down or the drill no longer performs a task it
previously performed.
• Avoid conducting short charges. Make sure that the
battery is fully charged every time by allowing the
charger to complete its full charging cycle.
3. The red light (b), should
begin to glow continuously,
indicating that the battery
d
e
• Avoid allowing lose items like screws or nails etc to be
stored with battery packs as these or similar items can
short battery packs and cause a fire or explosion.
• Always unplug the charger when not in use and store in
a dry secure place.
• Avoid charging or storing your battery in temperatures
below 0ºC and above 40ºC.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the blower tube
CAUTION. Always ensure that the tool is switched off and
the battery is removed before making any adjustments or
maintenance procedures.
Slide the blower tube (2)
onto the blower housing,
ensuring the hole in the tube
matches up with the raised
section in the housing.
Operation of the blower
Hold the blower firmly and
rotate from side to side,
holding the tube several
inches above the ground.
Slowly move forward
directing the debris to the
desired location.
• Prior to using the blower,
ensure you have read and
understood this instruction
manual.
• Ensure you are wearing suitable clothing and also safety
equipment like safety glasses, ear protection and a mask
if necessary.
• Ensure the attachments to the blower are correctly fitted
and adjusted.
Turning the blower on and off
1.Ensure the battery pack
(3) is inserted.
2.To switch on squeeze the
trigger switch (1).
• Be aware of other people and animals in the area where
you are to be operating the blower.
3.To switch off, release the
trigger switch.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips for using your blower
The following points may assist you in the operation of
the blower.
• Always try and blow dry leaves, cuttings or general
garden debris, wet material is difficult to move.
• If the leaves etc. are damp, then use the blower to pile
the leaves etc. into one area for collection.
Maintenance and storage information
Prior to cleaning or any maintenance, always ensure the
battery pack has been removed from the tool.
When you have finished using the blower, always check to
make sure the product is clean and free of dirt and debris.
Do not use solvents to clean the blower.
Store the blower in a dry place, and out of reach of
children.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
With continuing product development changes may
have occurred which render the product received
slightly different to that shown in this instruction
manual. The manufacturer reserves the right to
Before returning this product for a
Warranty Claim or any other reason
Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)
change specifications without notice. Note:
Specifications may differ from country to country.
When you make your call, please have
the following information at hand:
• GMC Product Type • GMC Product Code
A GMC Service Engineer will take your call and, in
most cases, will be able to solve your problem over
the phone.
The GMC 777 Helpline operates from 7am to
7pm, 7 days a week (EST). This allows you
to contact GMC directly with any queries and
technical questions you have regarding
our products.
You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.
45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel: (03) 8346 1100 Fax: (03) 8346 1200
Save this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|