Gefen Marine Radio EXT DVI 1CAT5 ELR User Manual

DVI ELR Extender  
over one CAT5  
EXT-DVI-1CAT5-ELR  
User Manual  
Release A1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty Information  
Gefen warrants the equipment it manufactures to be free from defects in material and  
workmanship.  
If equipment fails because of such defects and Gefen is notified within two (2) years from  
the date of shipment, Gefen will, at its option, repair or replace the equipment, provided  
that the equipment has not been subjected to mechanical, electrical, or other abuse or  
modifications. Equipment that fails under conditions other than those covered will be  
repaired at the current price of parts and labor in effect at the time of repair. Such repairs  
are warranted for ninety (90) days from the day of reshipment to the Buyer.  
This warranty is in lieu of all other warranties expressed or implied, including without  
limitation, any implied warranty or merchantability or fitness for any particular purpose, all of  
which are expressly disclaimed.  
1. Proof of sale may be required in order to claim warranty.  
2. Customers outside the US are responsible for shipping charges to and from Gefen.  
3. Copper cables are limited to a 30 day warranty and cables must be in their original  
condition.  
The information in this manual has been carefully checked and is believed to be accurate.  
However, Gefen assumes no responsibility for any inaccuracies that may be contained  
in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or  
consequential damages resulting from any defect or omission in this manual, even if  
advised of the possibility of such damages. The technical information contained herein  
regarding the features and specifications is subject to change without notice.  
For the latest warranty coverage information, refer to the Warranty and Return Policy under  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contacting Gefen Technical Support  
Technical Support  
(818) 772-9100  
(800) 545-6900  
8:00 AM to 5:00 PM Monday - Friday, Pacific Time  
Fax  
(818) 772-9120  
Email  
Web  
Mailing Address  
Gefen, LLC  
c/o Customer Service  
20600 Nordhoff St.  
Chatsworth, CA 91311  
Product Registration  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Notes  
Shielded Twisted-Pair (STP) CAT-5e or CAT-6 cabling is recommended.  
However, Un-shielded Twisted-Pair (UTP) CAT-5e or CAT-6 cabling is acceptable.  
Shielded cable is preferred as it provides immunity to Electromagnetic Interference  
(EMI), cell phones, and A/C motors.  
DVI ELR Extender over one CAT5 is a trademark of Gefen, LLC.  
© 2014 Gefen, LLC. All Rights Reserved. All trademarks are the property of their respective owners.  
Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentation  
without prior written notice.  
Pb  
This product uses UL or CE listed power supplies.  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features and Packing List  
Features  
Extends DVI up to 495 feet (150 meters) over one CAT-5e cable  
Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)  
EDID management for rapid integration of source and display  
Enable/Disable switches for HPD pass-through  
Power-Save (Green Mode) selector switch  
150m/100m range selector switch configures the extender for maximum range  
(150 meters) or maximum bandwidth  
Locking power supplies  
Surface-mountable  
®
1080P  
Packing List  
The DVI ELR Extender over one CAT5 ships with the items listed below. If any of these  
items are not present in your box when you first open it, immediately contact your dealer  
or Gefen.  
1 x DVI ELR Extender over one CAT5 (Sender unit)  
1 x DVI ELR Extender over one CAT5 (Receiver unit)  
1 x 6 ft. dual link DVI cable (M-M)  
2 x 5V DC power supplies  
1 x Quick-Start Guide  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
1
Getting Started  
Introduction............................................................................................................ 2  
Sender Unit ................................................................................................... 2  
Receiver Unit................................................................................................. 4  
Installation ............................................................................................................. 6  
Connection Instructions................................................................................. 6  
Sample Wiring Diagram ................................................................................ 6  
2
Basic Operation  
LED Status.......................................................................................................... 10  
DIP Switch Configuration .....................................................................................11  
Default Settings........................................................................................... 11  
EDID Management...................................................................................... 12  
Hot-Plug Detect (HPD)................................................................................ 12  
Power Mode................................................................................................ 13  
Long-Reach Mode....................................................................................... 13  
3
Appendix  
Specifications ...................................................................................................... 16  
viii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVI ELR Extender  
over one CAT5  
1 Getting Started  
Introduction............................................................................................................ 2  
Sender Unit ................................................................................................... 2  
Receiver Unit................................................................................................. 4  
Installation ............................................................................................................. 6  
Connection Instructions................................................................................. 6  
Sample Wiring Diagram ................................................................................ 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Sender Unit  
1
EXT-DVI-1CAT5-ELRS  
Gefen  
Link  
DVI ELR Extender  
over one CAT5 S  
2
3
4
5
5V DC Link  
DVI In  
Power  
page | 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
ID  
1
Name  
Link  
Description  
Connect a CAT-5 cable from this jack to the  
Link jack on the Receiver unit.  
2
3
5V DC  
Connect the included 5V DC power supply to  
this power receptacle.  
Link (LED)  
This green LED indicates the current state of  
more information on LED status messages.  
4
5
DVI In  
Connect the DVI source to this port using the  
included DVI cable.  
Power  
This LED indicator will glow bright blue when  
the included power supply is connected  
between the 5V DC power receptacle and an  
available electrical outlet.  
page | 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Receiver Unit  
1
EXT-DVI-1CAT5-ELRR  
Gefen  
Link  
DVI ELR Extender  
over one CAT5 R  
2
3
4
5
5V DC Link  
DVI Out  
Power  
page | 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
ID  
1
Name  
Link  
Description  
Connect a CAT-5 cable from this jack to the  
Link jack on the Sender unit.  
2
3
5V DC  
Connect the included 5V DC power supply to  
this power receptacle.  
Link (LED)  
This green LED indicates the current state of  
more information on LED status messages.  
4
5
DVI Out  
Connect the DVI source to the display using  
a DVI cable.  
Power  
This LED indicator will glow bright blue when  
the included power supply is connected  
between the 5V DC power receptacle and an  
available electrical outlet.  
page | 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Connection Instructions  
1. Use the included DVI cable to connect the DVI source to the DVI In port  
on the Sender unit.  
2. Connect the Receiver unit to the DVI display using another DVI cable.  
3. Connect a CAT-5 (CAT-5e or better is recommended) cable, up to 495 feet  
(150 meters) from the Link jack on the Sender unit to the Link jack on the Receiver  
unit.  
4. Connect the included 5V DC locking power supplies to the Sender and Receiver unit.  
Do not overtighten the locking power connectors.  
5. Connect the AC power cord from the power supply to an available electrical outlet.  
Sample Wiring Diagram  
CAT5 CABLE  
DVI CABLE  
DVI Source  
Receiver  
Sender  
DVI Display  
EXT-DVI-1CAT5-ELR  
page | 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVI ELR Extender  
over one CAT5  
2 Basic Operation  
LED Status.......................................................................................................... 10  
DIP Switch Configuration .....................................................................................11  
Default Settings........................................................................................... 11  
EDID Management...................................................................................... 12  
Hot-Plug Detect (HPD)................................................................................ 12  
Power Mode................................................................................................ 13  
Long-Reach Mode....................................................................................... 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LED Status  
The Power and Link LED indicators on the Sender and Receiver unit provide basic  
information on the current status of the DVI ELR Extender over one CAT5.  
The information, in the table below, applies to both the Sender and Receiver unit.  
LED  
Status  
Description  
Power  
Solid blue  
Power connected to Sender /  
Receiver unit.  
Off  
No power supplied to the Sender /  
Receiver unit.  
Make sure each power supply  
is connected to the Sender and  
Receiver unit.  
Make sure that the outlet is “live”.  
Link  
Solid green  
Link integrity between the Sender  
and Receiver unit is good.  
Source is connected to the Sender  
unit.  
Display (or other sink device) is  
connected to the Receiver unit.  
Flashing  
green  
No source is connected to the  
Sender unit.  
Display (or other sink device) is not  
connected to the Receiver unit.  
Off  
Link integrity is compromised.  
Check the cable between the Link  
port on the Sender and Receiver unit.  
page | 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DIP Switch Configuration  
There is a bank of four DIP switches on the bottom of the Sender and Receiver unit.  
Remove the piece of colored tape to reveal the DIP switch bank. These DIP switches  
provide control over EDID management, HPD pass-through, power modes, and range  
selection.  
ON SAB  
1 2 3 4  
ON SAB  
1 2 3 4  
Bottom of Sender / Receiver unit  
Default Settings  
Description  
Sender unit  
Receiver unit  
Default settings for Sender and Receiver unit.  
ON SAB  
ON SAB  
Internal EDID  
HPD is high  
Green mode is disabled  
Long-Reach mode is disabled  
1 2 3 4  
1 2 3 4  
page | 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIP Switch Configuration  
Each of the following sections describe the DIP switch settings that control each feature.  
DIP switches that are not related to a specific feature have been grayed-out. Note that DIP  
switch settings can be used independently or in conjunction with other features, as desired.  
EDID Management  
When switching between different EDID modes, the Sender unit must be power-cycled in  
order for the changes to take effect.  
Description  
Sender unit  
Receiver unit  
Local (Internal) EDID. This EDID provides  
generic video/audio support which is  
compatible with most displays.  
ON SAB  
ON SAB  
This is the default setting.  
1 2 3 4  
ON SAB  
1 2 3 4  
ON SAB  
Downstream EDID is used. Both DDC  
and HPD (Hot-Plug Detect) are passed  
through, allowing the full audio/video  
capabilities of the display to be used.  
1 2 3 4  
1 2 3 4  
Hot-Plug Detect (HPD)  
When switching between different HPD modes, the Sender unit must be power-cycled in  
order for the changes to take effect.  
Description  
Sender unit  
Receiver unit  
Forces HPD high.  
ON SAB  
ON SAB  
This is the default setting.  
1 2 3 4  
ON SAB  
1 2 3 4  
ON SAB  
HPD is passed through from the sink  
to the source.  
1 2 3 4  
1 2 3 4  
page | 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIP Switch Configuration  
Power Mode  
Description  
Sender unit  
Receiver unit  
Power-Save (Green) mode. The Receiver unit  
is powered only when a video signal is present  
on the DVI (or HDMI) cable. Sleep Mode  
consumes less than 1 Watt of power.  
ON SAB  
ON SAB  
1 2 3 4  
ON SAB  
1 2 3 4  
ON SAB  
Normal mode. In this mode, the Receiver unit is  
always powered.  
1 2 3 4  
1 2 3 4  
Long-Reach Mode  
When set to “Long-Reach” mode, both audio and video can be extended up to 495 feet  
(150 meters) However, the color depth is limited to 8-bit.  
Description  
Sender unit  
Receiver unit  
Long-Reach mode. Audio and video can be  
extended up to 495 feet (150 meters).  
Video color depth is limited to 8-bit.  
ON SAB  
ON SAB  
1 2 3 4  
ON SAB  
1 2 3 4  
ON SAB  
Normal mode. Audio and video can be  
extended up to 330 feet (100 meters).  
Color depth up to 12-bit is supported.  
1 2 3 4  
1 2 3 4  
page | 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVI ELR Extender  
over one CAT5  
3 Appendix  
Specifications ...................................................................................................... 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Supported Formats  
Resolutions (max.)  
1920 x 1200 (WUXGA)  
1080p Full HD  
Connectors, Indicators, and Controls  
DVI In (Sender)  
1 x DVI-I, 29-pin, female (digital only)  
1 x DVI-I, 29-pin, female (digital only)  
1 x RJ-45  
DVI Out (Receiver)  
IP control (Sender / Receiver)  
Power (Sender / Receiver)  
Power Indicator (Sender / Receiver)  
Link Indicator (Sender / Receiver)  
DIP Switches (Sender / Receiver)  
1 x 5V DC, locking  
1 x LED, blue  
1 x LED, green  
4 x SPDT  
Operational  
Maximum Pixel Clock  
Power Consumption (Sender / Receiver)  
Operating Temperature  
Operating Humidity  
165 MHz  
10W per unit (max.)  
+32 to +140 °F (0 to +45 °C)  
0 to +90% RH, non-condensing  
Physical  
Dimensions (W x H x D)  
(Sender / Receiver)  
4.3” x 1” x 3.4”  
(110mm x 26mm x 86mm)  
Unit Weight (each)  
0.36 lbs (0.16 kg)  
page | 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Sweeper 486242211 User Manual
Cub Cadet Lawn Mower 1515 User Manual
Cuisinart Oven TOB 50 User Manual
Delta Electronics Power Supply PMC 24V050W1AA User Manual
Dynacord Musical Instrument DRP 10 User Manual
Edelbrock Air Cleaner 8679 User Manual
Fellowes Automobile Accessories C 480 User Manual
Garmin Fish Finder 200 User Manual
GE Air Conditioner 10 ACA User Manual
Generac Portable Generator 005789 0 User Manual