GE Appliances
JDP39WW—30" Drop-In Electric Range
Dimensions (in inches)
Countertop Cutout Top View
Inside back wall of cabinet
or rear wall
30" to
bottom of
cabinet
over
1-1/2" MIN.
range
5/16" MIN. Flat
Adjoining
vertical
29-1/4"
30
cabinet
Exact
18
or wall
above
26"
(To front of
door handle)
smooth cut
22-13/16
Front
countertop
Face of
Cabinet
3/8
1-1/8
23-3/16"
MIN.
For best fit
30
22" MIN.
Flat Counter
30"
Exact
between
cabinets
30-1/4
30-1/8
30" Exact
smooth cut
Counter overhang
(1-1/4" Standard)
3" MIN.
Overhang
(Both sides)
If countertop edge is formed, this
dimension must extend to flat area
Base
panel
4" x 4"
Junction box
in adjoining
cabinet or
under cabinet
floor
KW Rating
24-5/8"
(To front edge of door
excluding handle)
240V
208V
11.6
8.7
18-3/4
Note: Cabinets installed adjacent to drop-in ranges must have
Important: 30" Drop-In Ranges are designed to hang from the
countertop. It does not rest on the floor. For installation alternatives,
refer to installation instructions packed with product.
an adhesion spec of at least 194°
®
™
For answers to your Monogram, GE Profile Performance Series, GE
™
Profile, GE, Hotpoint and RCA appliance questions, call GE Answer
Center® service, 800.626.2000.
Note: 30" Drop-In Electric Ranges conform to U.L. requirements for
3" minimum spacing between range and side wall above countertop.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Installation Information: Before installing, consult installation
instructions (Pub. No. 31-10129) packed with product for current
dimensional data.
Listed by
Underwriters
Laboratories
R
Revised 9/97
Download from Www.Somanuals.com. All Manuals Search And Download.
|