TM
JGSP48SH – GE Profile™ 30" Slide-In Gas Range
Dimensions (in inches) and Installation Information
You must use the rear filler strip kit shipped with the
range or the optional accessory backguard (JXS31,
JXS32, JXS33, JXS34) when installing these ranges.
Accessory
Backguard
Shave Raised Edge To Clear
31-1/8 Wide Control Panel
30 Min.
30 Min.
4 Min.
From Walls
9/16
4
24
Note: Cabinets installed adjacent to slide-in ranges
must have an adhesion spec of at least 194°F
temperature rating.
31-1/4
2-7/8"
To Front
2"
(Grates)
Surface Of
Countertop
Optional Kits for Slide-In Gas Ranges:
(Available at additional cost)
23-3/16
13 Max.
18 Min.
Lower/Side Trim Kits
36
20-5/8"
Max. depth of
cord, plug,
JXS52BB—Lower Trim Kit (Black)
JXS53WW—Lower Trim Kit (White)
JXS55CC—Lower Trim Kit (Bisque)
Door Clearance
From Front
Surface of
Countertop
25
receptacle box
& gas hookup
3-1/2 to prevent
interference
Acceptable
Gas Line &
Electrical
36
with drawer
Accessory Backguards
Outlet Area
3
JXS31—White Accessory Backguard
JXS32—Brushed-Chrome Accessory Backguard
JXS34—Black Accessory Backguard
JXS35—Bisque Accessory Backguard
7
27-1/2
44-3/4
15
12
29-15/16 Min.
30-1/16 Max.
Endcap Kit
JXS40—Endcap kit to accommodate replacement
where countertop may already be notched.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Counter Cutout Dimensions (in inches)
If you are NOT using the
If you are using the
optional Filler or Backguard:
optional Filler or Backguard:
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
25
23-3/16
30
For answers to your Monogram,® GE Profile™ or
GE appliance questions, visit our website at
GEAppliances.com or call
30
GE Answer Center® service, 800.626.2000.
Specification Created 4/04
230126
Download from Www.Somanuals.com. All Manuals Search And Download.
|