Fujitsu Garage Door Opener D1521 User Manual

2
answers  
Technisches Handbuch / Technical Manual  
Mainboard D1522 / D1521  
Deutsch / English / Français  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dieses Handbuch wurde auf Recycling-Papier gedruckt.  
This manual has been printed on recycled paper.  
Ce manuel est imprimé sur du papier recyclé.  
Este manual ha sido impreso sobre papel reciclado.  
Questo manuale è stato stampato su carta da riciclaggio.  
Denna handbok är tryckt på recyclingpapper.  
Dit handboek werd op recycling-papier gedrukt.  
Herausgegeben von/Published by  
Fujitsu Siemens Computers GmbH  
Bestell-Nr./Order No.: A26361-D1522-Z120-1-6319  
Printed in the Federal Republic of Germany  
AG 0103 01/03  
A26361-D1522-Z120-1-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deutsch  
English  
Français  
Mainboard D1522 /  
D1521  
Technisches Handbuch  
Technical Manual  
Ausgabe Januar 2003  
January 2003 edition  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intel, Pentium und Celeron sind eingetragene Warenzeichen der Intel Corporation, USA.  
Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft Corporation.  
PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines, Inc.  
Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen der  
jeweiligen Inhaber und werden als geschützt anerkannt.  
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks,  
der Wiedergabe durch Kopieren oder ähnliche Verfahren.  
Zuwiderhandlungen verpflichten zu Schadenersatz.  
Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung.  
Liefermöglichkeiten und technische Änderungen vorbehalten.  
Dieses Handbuch wurde erstellt von  
cognitas. Gesellschaft für Technik-Dokumentation mbH  
Copyright Fujitsu Siemens Computers GmbH 2003  
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.  
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.  
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.  
All other trademarks referenced are trademarks or registered trademarks of their respective owners,  
whose protected rights are acknowledged.  
All rights, including rights of translation, reproduction by printing, copying or similar methods, even of  
parts are reserved.  
Offenders will be liable for damages.  
All rights, including rights created by patent grant or registration of a utility model or design, are  
reserved. Delivery subject to availability.  
Right of technical modification reserved.  
This manual was produced by  
cognitas. Gesellschaft für Technik-Dokumentation mbH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Übersicht/Overview Mainboard D1522 / D1521  
1 = Stromversorgung / Power Supply  
2 = Diskettenlaufwerk / Floppy disk drive  
3 = IDE-Laufwerke 3/4 / IDE-drives 3/4  
4 = Stromversorgungsüberwachung /  
Power supply monitoring  
5 = Bedienfeld / Front panel  
6 = Schalter / Switch  
Interne Anschlüsse und Steckplätze / Internal  
connectors and slots  
21  
7 = Steckbrücken / Jumper  
8 = IDE-Laufwerke 1/2 / IDE-drives 1/2  
9 = Batterie / Battery  
10 = Lüfter 2 / Fan 2  
11 = Power On LED II  
12 = Gehäuseüberwachung / Intrusion  
13 = LCD-Statusanzeige / LCD status  
indicator  
CPU  
Pentium 4  
1
2
3
4
20  
19  
5
14 = USB C/D  
15 = USB E/F  
16 = Serielle Schnittstelle 2 / serial  
interface 2  
6
7
8
9
AGP  
17 = S/PDIF Anschluss / S/PDIF  
connector  
PCI 1  
PCI 2  
PCI 3  
18 = Audio-Bedienfeld / Audio front panel  
19 = CD-Audio in  
20 = Stromversorgung Prozessor /  
Processor power supply  
21 = Lüfter 1 / Fan 1  
18  
17  
10  
14  
15  
13 11  
12  
16  
Optionale Komponenten / Optional  
components  
Externe Anschlüsse / External connectors  
Bedienfeld / Front panel  
Power On/Off  
LAN  
Sleep LED  
AUDIO  
Message LED  
1)  
Power On  
1) 3)  
Sleep  
1)  
1)  
HD-LED  
LED  
Reset  
1
2
Speaker  
1) 2)  
SCSI LED Input  
1) Cable is not included in the delivery scope.  
2) The same interface  
3) 2pin or 3pin connector possible  
3)  
1)  
PowerOn LED II  
3
1
A26361-D1522-Z120-1-6319  
Umschlag/Cover  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Mainboard D1522 / D1521................................................................................................................1  
Notational conventions ..............................................................................................................1  
Important notes..................................................................................................................................2  
Information about boards...........................................................................................................2  
List of features...................................................................................................................................3  
Special technical features – special features .............................................................................4  
Brief instructions on installing mainboard....................................................................................6  
Prior to installation.....................................................................................................................6  
Interfaces and connectors ..............................................................................................................8  
External ports ....................................................................................................................................8  
Internal ports and connectors ............................................................................................................9  
Hard disk connection .................................................................................................................9  
Pin assignment of internal ports.......................................................................................................10  
Settings with switches and jumpers ............................................................................................15  
Add-on modules / Upgrading........................................................................................................16  
Installing and removing processors..................................................................................................16  
Installing the processor with heat sink and fan.........................................................................16  
Upgrading main memory..........................................................................................................18  
Upgrading AGP screen controllers...................................................................................................19  
Adding PCI cards.............................................................................................................................19  
PCI bus interrupts - Selecting correct PCI slot.........................................................................20  
Replacing lithium battery..........................................................................................................21  
BIOS update....................................................................................................................................22  
BIOS Recovery - Recovering System BIOS ....................................................................................23  
Microcode Update ...........................................................................................................................23  
Drivers.............................................................................................................................................24  
Annex .............................................................................................................................................25  
Electrical Properties.........................................................................................................................25  
Loadability for connections and fuses......................................................................................25  
Mainboard current requirement................................................................................................25  
APM and ACPI system status, energy-saving modes......................................................................26  
Mainboard Revision and BIOS Version............................................................................................27  
Error messages .............................................................................................................................28  
DOS error messages.......................................................................................................................31  
SmartCard reader - error messages ................................................................................................32  
Glossary ..........................................................................................................................................33  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mainboard D1522 / D1521  
Your mainboard is available in different configuration levels. Depending on the configuration chosen,  
some of the hardware components described may not be available on your mainboard.  
Further information  
Information on the BIOS Setup and additional descriptions of the drivers are contained:  
in the readme files on your hard disk  
on the driver floppy disks included  
on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".  
The programme Acrobat Reader must be installed to be able to open the manuals. You  
may find the programme on the CD-ROM directory: utls/acrobat.  
i
For more details please read the according readme.txt files.  
Notational conventions  
The meanings of the symbols and fonts used in this manual are as follows:  
indicates information which is important for your health or for preventing physical  
damage.  
!
indicates additional information which is required to use the system properly.  
i
Ê
Text which follows this symbol describes activities that must be performed in the order shown.  
This symbol indicates that you must enter a blank space (press the Space Bar) at this point.  
This symbol indicates that you must press the Enter key.  
Ë
Ú
Text in this typefaceindicates screen outputs.  
Text in this bold typefaceindicates the entries you make via the keyboard.  
Text in italics indicates commands or menu items.  
"Quotation marks" indicate names of chapters or terms.  
A26361-D1522-Z120-3-6319  
English - 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mainboard D1522 / D1521  
Important notes  
With the mainboard installed you must open the system to access the mainboard. How to dismantle  
and reassemble the system is described in the operating manual accompanying the system.  
Connecting cables for peripherals must be adequately shielded to avoid interference.  
Observe the safety notes in the operating manual of your system.  
!
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore  
essential to observe the instructions in the "Add-on modules / Upgrading" - "Replacing  
lithium battery" section.  
Components can become very hot during operation. Ensure you do not touch  
components when making extensions to the mainboard. There is a danger of burns!  
The shipped version of this board complies with the requirements of the EEC directive  
89/336/EEC "Electromagnetic compatibility".  
Compliance was tested in a typical PC configuration.  
When installing the board, refer to the specific installation information in the manual for  
the receiving device.  
The warranty is invalidated if the system is damaged during the installation or  
replacement of expansions. Information on which expansions you can use is available  
from your sales outlet or the customer service centre.  
i
Information about boards  
To prevent damage to the mainboard, the components and conductors on it, please take great care  
when you insert or remove boards. Take great care to ensure that extension boards are slotted in  
straight, without damaging components or conductors on the mainboard, or any other components,  
for example EMI spring contacts.  
Remove the plug from the mains outlet so that system and mainboard are totally disconnected from  
the mains voltage.  
Be careful with the locking mechanisms (catches, centring pins etc.) when you replace the  
mainboard or components on it, for example memory modules or processors.  
Never use sharp objects (screwdrivers) for leverage.  
Boards with electrostatic sensitive devices (ESD) are identifiable by the label shown.  
When you handle boards fitted with ESDs, you must, under all circumstances,  
observe the following:  
You must always discharge static build up (e.g. by touching a grounded object)  
before working.  
The equipment and tools you use must be free of static charges.  
Remove the power plug from the mains supply before inserting or removing  
boards containing ESDs.  
Always hold boards with ESDs by their edges.  
Never touch pins or conductors on boards fitted with ESDs.  
2 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mainboard D1522 / D1521  
List of features  
Onboard features  
D1522-A  
i845GE  
µ-ATX  
!
D1521-A  
Chipset  
i845GE  
Board size  
µ-ATX  
!
VGA  
Audio  
!
!
Buzzer / int. Speaker Support  
LAN / with Alert-on-LAN  
HI-SPEED USB 2.0  
SmartCard Reader Support (USB / serial)  
Temperature monitoring  
System Monitoring  
- / !  
! / !  
!
- / !  
! / -  
!
! / -  
!
- / -  
-
!
-
Fujitsu Siemens Computers Keyboard Power  
Button Support  
!
!
Internal ports  
DIMM Sockets (DDR SDRAM, PC2100/1600)  
AGP Slot (2/4x, 32 bit, 66 MHz, 1.5 V)  
PCI slot (32 bit, 33 MHz, 5 V and 3.3 V)  
CNR Slot (Type A, AC‘97 only)  
IDE Interface (Ultra DMA/100)  
2
2
1
1
3
3
-
-
2
2
Floppy Interface (up to 2.88 MB)  
S/PDIF* (digital audio)  
1
1
1
1
CD / AUX audio input  
1 / -  
1 / -  
Frontpanel Audio (headphone, microphone)  
Wake On LAN  
1
1
-
-
USB Ports* (2.0, ~480 Mb/s)  
4
4
Serial Ports* (FIFO, 16550 compatible)  
Fan Connectors PSU** / FAN1 / FAN2 / FAN3  
SMBus Connector* (Case Temperature)  
Intrusion Connector* (Case Open)  
Power Connectors ATX / ATX12V / AGP PRO  
1
1
1 / 1 / 1 / -  
- / 1 / 1 / -  
1
1
-
-
1 / 1 / -  
1 / 1 / -  
A26361-D1522-Z120-3-6319  
English - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mainboard D1522 / D1521  
External ports  
VGA  
1
1
Audio Mic. in / Line in / Line out (2 x 0,5 W / 8 )  
Game/MIDI  
1 / 1 / 1  
1 / 1 / 1  
-
1
-
1
LAN (RJ-45)  
PS/2 mouse/keyboard  
USB Ports (2.0, ~480 Mb/s)  
Serial Ports (FIFO, 16550 compatible)  
Parallel Port (EPP/ECP)  
1 / 1  
2
1 / 1  
2
1
1
1
1
* for use with internal devices or optional Front or Rear panel  
** not supported by standard power supplies  
Special technical features – special features  
Your mainboard is available in different configuration levels. Depending on the configuration, your  
mainboards is equipped with or supports the features described in the following.  
Thermal Management and System Monitoring  
A microcontroller developed by Fujitsu Siemens Computers reliably protects your PC  
against damage caused by overheating. Overheating can lead to the data loss or  
processor damage. An ingenious fan control and monitoring system prevents  
unnecessary noise. Should the processor nevertheless become too hot at the  
maximum fan speed, then the processor clock rate will automatically be reduced so  
that the system continues to run stably. In addition, the microcontroller offers  
monitoring of, for example, system voltages (12 V, 5 V, CMOS), opening of the case  
and a watchdog function.  
The microcontroller operates independently of the operating system and the  
processor. All values are displayed with DeskView, DeskViewOEM or SystemGuard.  
You can reduce the noise resulting when the hard disk is accessed to a barely  
perceptible level. The resulting power decrease is approx. 10-20% depending on the  
hard disk.  
A password assignment for the hard disk is only possible with suitable, newer hard  
disks and prevents unauthorised access to the stored data.  
Silent Mode and Harddisk Password are activated in the BIOS Setup. Additional  
information is contained in the "BIOS Setup" manual.  
4 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mainboard D1522 / D1521  
Logo Boot  
A customer-specific logo can be displayed during system booting. The logo is loaded  
using the LogoFlash tool. The logo can have a size of 640 x 480 pixels with 16  
colours. The tool is provided on the CD "Drivers & Utilities" or "Drivers & Utilities  
enhanced" or is available on the Internet at http://www.fujitsu-siemens.com/mainboards.  
DeskView / DeskViewOEM  
The network-capable manageability software DeskView/DeskViewOEM* mainly  
consists of three modules:  
DeskInfo shows the most important device data of the PCs in a network (local  
and/or on an administrator PC).  
DeskAlert monitors the operability of all major components and triggers alarms if  
necessary depending on the mainboard variant.  
DeskFlash carries out a BIOS update under Windows.  
Recovery BIOS  
If an error occurs during a BIOS update (e.g. due to a power failure), the system BIOS  
will be destroyed. All Fujitsu Siemens Computers mainboards are equipped with a  
recovery BIOS. With it a destroyed BIOS can easily be restored. Exact instructions  
are provided in the chapter "BIOS Recovery - Recovering System BIOS".  
IA-PC  
Instantly Available PC ensures fast availability of the PC from an energy-saving mode.  
Within just a few seconds the PC is in exactly the same state it was in when it was  
switched off without time-consuming booting. Depending on the operating system, the  
PC can be switched into an energy-saving mode with applications open by pressing  
the ON/OFF switch.  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 5  
Brief instructions on installing mainboard  
Brief instructions on installing  
mainboard  
If you have purchased a separate mainboard, you can install the mainboard in your system in  
accordance with the following brief instructions.  
The activities described here assume a basic knowledge of PCs and cannot be carried out by a  
layperson. If you are not sure whether you have the necessary specialised knowledge, then leave  
this work to an expert.  
The illustrations of the system show examples of possible cases.  
Prior to installation  
Ê
Ê
Please take note of the safety information in the "Important notes" chapter.  
Check whether the processor, memory modules and power supply are suitable for this  
mainboard:  
(see "Installing and removing processors" chapter).  
(see "Upgrading main memory" chapter).  
(see "Electrical Properties" chapter).  
Ê
Ê
Make sure the current requirement of the fans (processor, case) does not exceed the  
loadability of the fan connections (see chapter entitled "Electrical Properties").  
First only install the components absolutely necessary (graphics card, processor and heat sink,  
one memory module) and only connect the required connections (power supply unit, case  
connections such as ATX on/off switch, hard disk or floppy disk drive). You should not install  
additional cards and devices until this minimum configuration successfully boots (see chapter  
entitled "Add-on modules / Upgrading".  
Installation  
Ê
Equip the mainboard with the processor, heat sink and memory modules before installation if  
possible. Further information can be found in "Installing and removing processors" chapter.  
Ê
Open the casing as described in the  
operating manual.  
6 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Brief instructions on installing mainboard  
Ê
Should no suitable connection field be  
provided in the case, then you must  
install the connection field (1) provided.  
Ensure the plate is aligned properly so that  
the connections are suitable for the  
mainboard later.  
Ê
Set the mainboard on the edge on  
which the connection field is located (2)  
and then insert the board in the  
case (3).  
Make sure that spacers in the housing are  
only mounted at points at which there are  
mounting holes in the mainboard.  
Ê
Fasten the mainboard with the screws.  
Ê
Connect the plugs for the power supply, control panel and drives to the corresponding  
connections on the mainboard.  
Driver installation  
Ê
Install the drivers for the chipset. You may find the driver on the "Drivers & Utilities" CD. Please  
refer to chapter "Drivers" for a description of installing drivers.  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 7  
Interfaces and connectors  
Interfaces and connectors  
The positions of the interfaces and connectors are shown on page "Cover".  
The components and connectors marked are not necessarily present on the mainboard.  
External ports  
The positions of the external ports are shown on page "Cover".  
PS/2 keyboard port, purple  
Serial interface, turquoise  
LAN connector  
PS/2 mouse port, green  
Parallel port/Printer, burgundy  
USB - Universal Serial Bus, black  
LAN  
Audio output (Line out), light green  
Audio input (Line in), light blue  
Microphone jack (mono), pink  
VGA port, blue (monitor)  
LAN connector  
This mainboard is equipped with the 82562ET (D1521) or the 82562EM (D1522) LAN controller.  
Both LAN controller support transfer speeds of 10 Mbit/s and 100 Mbit/s. The LAN controller are  
equipped with a 3 KB transmission and receiving buffer (FIFO) and support WOL function through  
Magic Packet.  
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® LAN BootP  
or bootix® PXE are supported.  
The LAN RJ45 connector has two LEDs (light emitting diodes).  
1 = a connection exists (e.g. to a hub).  
2 = Link Mode: the LAN connection is active.  
2
1
WOL mode: a Magic PacketTM is being  
received.  
8 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Interfaces and connectors  
Graphics port - Supported screen resolutions  
Depending on the operating system used, the screen resolutions in the following table refer to the  
mainboard screen controller.  
If you are using an external screen controller, you will find details of supported screen resolutions in  
the operating manual or technical manual supplied with the controller.  
Screen resolution  
640 x 480  
Refresh rate (Hz)  
bpp  
32  
32  
32  
32  
32  
32  
32  
Colour  
32 bit  
32 bit  
32 bit  
32 bit  
16 bit  
16 bit  
16 bit  
120  
120  
100  
100  
100  
75  
800 x 600  
1024 x 768  
1280 x 1024  
1600 x 1200  
1920 x 1440  
2048 x 1536  
60  
Internal ports and connectors  
The positions of the internal ports and connectors are shown on the Cover. Additional information on  
some ports is also provided here.  
Hard disk connection  
An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for  
the ultra ATA/66 or ultra ATA/100 mode.  
Ê
Connect the end of the cable marked with blue to the mainboard.  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 9  
Interfaces and connectors  
Pin assignment of internal ports  
The pin assignment of some internal connections is shown in English in the following.  
Some of the following connectors may be optional!  
i
Power On/Off  
Sleep LED  
Power On  
1) 3)  
Message LED  
1)  
Front panel  
Sleep  
1)  
1)  
HD-LED  
LED  
Reset  
Watch the poling of the LEDs. The positive pole  
of the connection cables is often indicated with a  
coloured wire.  
1
2
Speaker  
1) 2)  
SCSI LED Input  
1) Cable is not included in the delivery scope.  
2) The same interface  
3) 2pin or 3pin connector possible  
Connection  
Reset  
Note  
Sleep  
Power On/Off  
HD LED  
This connection is reserved for future use.  
SCSI Activity Attention: Do not connect to the LED connections of an SCSI controller! This  
Input  
connection is intended for a cable with a 4-pin connector. An SCSI controller  
reports activity (low-active) via this cable.  
Message LED  
Power On LED Indicates the system state APM or ACPI together with the Sleep LED (see  
chapter entitled "APM and ACPI system status, energy-saving modes").  
Speaker  
0,5 W at 8 Ohm  
Sleep LED  
Indicates the system state APM or ACPI together with the Power-On LED (see  
chapter entitled "APM and ACPI system status, energy-saving modes").  
10 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Interfaces and connectors  
Power On LED II  
1
3
Pin  
Note  
1
2
3
Power On LED (Anode)  
Power On LED (Anode)  
Power On LED (Cathode)  
1
Power supply ATX  
11  
Pin  
1
Signal  
+3.3 V (P3V3P)  
+3.3 V (P3V3P)  
GND  
Pin  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
Signal  
+3.3 V (P3V3P)  
-12 V (P12VN)  
GND  
2
3
4
+5 V (VCC)  
GND  
PS on (low asserted)  
GND  
5
6
+5 V (VCC)  
GND  
GND  
7
GND  
8
9
Powergood (high asserted)  
+5 V Auxiliary (VCC Aux)  
+12 V (P12VP)  
-5 V (P5VN)  
+5 V (VCC)  
+5 V (VCC)  
10  
1
Power control (system monitoring)  
Pin  
Signal  
AC Outlet (high asserted)  
1
2
3
4
5
6
7
8
PS FAN Control (PS FAN C max. 3 mA)  
Reserved  
PS FAN Sense  
SMB CLK  
SMB DATA  
VCC EEPROM (+3.3 V)  
GND  
A26361-D1522-Z120-3-6319  
English - 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Interfaces and connectors  
1
Fan 1  
(system fan - supervised)  
Pin  
1
Signal  
GND  
2
Controlled Fan voltage (0 V, +6 V ... +12 V, max. 1 A)  
or fix Fan voltage (+12 V, max. 1 A)  
Fan sense  
3
1
Fan 2  
(system fan - supervised)  
Pin  
1
Signal  
GND  
2
Controlled Fan voltage (0 V, +6 V ... +12 V, max. 1 A)  
or fix Fan voltage (+12 V, max. 1 A)  
Fan sense  
3
LCD status indicator  
(for use with optional front panel)  
2
1
Pin  
1
Signal  
Pin  
2
Signal  
GND  
GND  
RFU  
SMB CLK  
SMB DATA  
Key  
3
4
5
6
Reserved for Future Use  
LAN Link Icon  
7
9
LAN Active Icon  
Harddisk Action Icon  
Message Icon  
8
10  
12  
14  
BMC Alert Icon  
Sleep Icon  
11  
13  
Power Icon  
P3V3P DUAL  
12 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Interfaces and connectors  
USB C/D / E/F - dual channel  
1
2
(internal or external via special wire)  
11  
12  
Pin  
Signal  
Pin  
Signal  
1
3
Key  
VCC C  
2
4
Chipcard reader on  
VCC D  
5
Data negative C  
Data positive C  
GND  
6
Data negative D  
Data positive D  
GND  
7
8
9
11  
10  
12  
Key  
Not Connected  
1
Intrusion  
for case open detect for optional push-button  
(opener)  
Pin  
1
Signal  
GND  
2
3
Case open (low asserted)  
Intrusion switch present (low asserted)  
1
Audio S/PDIF (2-pin)  
Pin  
Signal  
1
2
GND  
SPDIF out  
A26361-D1522-Z120-3-6319  
English - 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Interfaces and connectors  
1
Audio S/PDIF (3-pin)  
Pin  
Signal  
1
2
3
GND  
SPDIF out  
GND  
1
2
Audio front panel  
Pin  
Signal  
Pin  
Signal  
1
3
5
7
9
Micro input  
Micro bias  
2
4
Analog GND  
Analog VCC  
Right line output  
NC  
Left line output  
6
Right line return  
Key  
Left line return  
8
10  
CD-ROM audio  
1
Pin  
1
Signal  
Left CD audio input  
CD GND  
2
3
CD GND  
4
Right CD audio input  
Processor power supply  
3
1
Pin  
Signal  
Pin  
Signal  
1
3
GND  
GND  
2
4
+12 V  
+12 V  
14 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings with switches and jumpers  
Settings with switches and jumpers  
Your mainboard is equipped with switches or jumpers. The positions of the switches or jumpers are  
shown on page "Cover".  
Switch 1 = Skipping system and BIOS Setup  
password  
ON  
Switch 2 = System BIOS recovery  
Switch 3 = must always be set to off  
Switch 4 = must always be set to off  
1
2
3
4
Pinpair 1 inserted =  
Skipping system and BIOS Setup password  
1
2
Pinpair 2 inserted =  
System BIOS recovery  
Any other setting =  
State of supply; jumper has no function  
The clock frequency of the processor is set automatically.  
i
Skipping system and BIOS Setup password - switch 1 / pinpair 1  
Switch 1 enables skipping the system and BIOS Setup password.  
On  
System and BIOS Setup password are skipped when the device is switched on and  
may be changed.  
Off  
System and BIOS Setup password must be entered when the device is switched on.  
Recovering System BIOS - switch 2 / pinpair 2  
Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore  
the old system BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter).  
On  
The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-  
Diskette" restores the System BIOS on the mainboard.  
Off  
Normal operation (default setting).  
Reserved - switch 3 and switch 4  
Switch 3 and 4 are reserved.  
A26361-D1522-Z120-3-6319  
English - 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add-on modules / Upgrading  
Add-on modules / Upgrading  
Exit energy-saving mode, switch off the system and remove the power plug from the  
mains outlet, before carrying out any of the procedures described in this chapter!  
Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI  
extension boards) are still supplied with power.  
!
Installing and removing processors  
Technical data  
Intel Pentium 4 with 400 or 533 MHz front side bus in the mPGA478 design.  
A current list of the processors supported by this mainboard is available on the Internet at:  
Installing the processor with heat sink and fan  
Ê
Remove the fan that there may be and the heat sink.  
2
3
1
4
5
A
Ê
Ê
Ê
Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).  
Remove the old processor from the socket (3).  
Insert the new processor in the socket so that the angled corner of the processor matches the  
coding on the socket (A) with regard to the position (4).  
The angled corner of the processor can also be at a different location than shown in the  
illustration.  
i
Ê
Push the lever back down until it clicks into place (5).  
16 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add-on modules / Upgrading  
Mounting heat sink  
Be sure to use heat conducting material between the processor and the heat sink. If a heat  
conducting pad (rubber-like foil) is already applied to the heat sink, then use it. Otherwise you must  
apply a very thin layer of heat conducting paste.  
Heat conducting pads can only be used once. If you remove the heat sink, you must clean it and  
apply new heat conducting paste before you remount it.  
Please note that, depending on the heat sink used, different heat sink mounts are required on the  
mainboard.  
If a counter-plate is mounted on the underside of the mainboard for reinforcement, no  
heat sinks of the type "Intel Boxed" may be used. Otherwise the retaining clips of the heat  
sink will be damaged.  
i
When using an "Intel Boxed" heat sink, the mainboard must be converted. This  
conversion set is either included with the mainboard or is available separately.  
If no counter-plate is mounted, you can use both "Intel Boxed" heat sinks and standard  
heat sinks. If you use the "Intel Boxed" heat sink, the mainboard will bend due to the high  
pressure of the retaining clips. This behaviour is specified by Intel.  
Ê
Depending on the configuration variant, you  
must pull a protective foil off the heat sink or  
coat the heat sink with heat conducting paste  
before fitting it.  
Ê
Ê
Depending on the processor variant, clips  
may also be supplied for mounting the heat  
sink that fix it in place.  
When you have mounted the optional fan,  
connect the fan plug to the corresponding  
connection on the mainboard.  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 17  
Add-on modules / Upgrading  
Upgrading main memory  
Technical data  
Technology: DDR 266 or DDR 333 unbuffered DIMM modules  
184-pin; 2.5 V; 64 Bit, no ECC  
Total size:  
128 Mbytes up to 2 Gbyte DDR-SDRAM  
Granularity:  
32, 64, 128, 256, 512 or 1024 Mbyte for one socket  
A current list of the memory modules recommended for this mainboard is available on the Internet  
At least one memory module must be installed. Memory modules with different memory capacities  
can be combined.  
You may only use unbuffered 2,5 V memory modules. Buffered memory modules are not  
supported.  
!
DDR-DIMM memory modules must meet the PC2100 or PC2700 specification.  
Installing a memory module  
2
2
Ê
Ê
Ê
Push the holders on each side of the memory compartment outwards.  
Insert the memory module into the location (1).  
At the same time flip the lateral holders upwards until the memory module snaps in place (2).  
18 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add-on modules / Upgrading  
Removing a memory module  
1
1
Ê
Ê
Push the clips on the right and left of the compartment outward (1).  
Pull the memory module from the compartment (2).  
Upgrading AGP screen controllers  
Technical data:  
The AGP slot supports the modes 1x/2x/4x with 32 bits and 66 MHz. Only 1.5 V AGP screen  
controllers are supported.  
Some older 3.3 V AGP screen controllers are coded like 1.5 V AGP screen controllers.  
The installation of such 3.3 V AGP screen controllers can cause serious damage to the  
mainboard and the AGP screen controller.  
i
Adding PCI cards  
Technical data:  
32 bit / 33 MHz PCI slots  
5 V and 3.3 V supply voltage  
3.3 V auxiliary voltage  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 19  
Add-on modules / Upgrading  
PCI bus interrupts - Selecting correct PCI slot  
To achieve optimum stability, performance and compatibility, avoid the multiple use of  
ISA IRQs or PCI IRQ Lines (IRQ sharing). Should IRQ sharing be unavoidable, then all  
involved devices and their drivers must support IRQ sharing.  
i
PCI IRQ Lines connect AGP slots, PCI slots and onboard components to the interrupt controller.  
PCI IRQ Lines are permanently wired on the mainboard.  
Which ISA IRQs are assigned to the PCI IRQ Lines is normally automatically specified by the BIOS  
(see description in "BIOS Setup").  
Monofunctional expansions cards:  
Standard AGP and PCI expansion cards require a maximum of one interrupt, which is called the PCI  
interrupt INT A. Expansion cards that do not require an interrupt can be installed in any desired slot.  
Multifunctional expansion cards or expansion cards with integrated PCI-PCI bridge:  
These expansion cards require up to four PCI interrupts: INT A, INT B, INT C, INT D. How many and  
which of these interrupts are used is specified in the documentation provided with the card.  
The assignment of the PCI interrupts to the PCI IRQ Lines is shown in the following table:  
Onboard controller  
PCI INT USB 1,1  
LINE  
AC97  
PCI slot  
USB SMB  
1st 2nd 3rd  
Audio Modem LAN AGP  
1
2
3
2,0  
us  
1 (A)  
2 (B)  
3 (C)  
4 (D)  
5 (E)  
6 (F)  
7 (G)  
8 (H)  
A
-
-
-
-
-
-
-
-
A
B
-
-
-
-
-
-
-
A
-
A
-
A
-
-
A
B
C
D
-
-
-
-
-
A
-
-
-
A
B
C
D
-
-
-
A
-
-
-
-
-
-
-
A
B
C
D
-
-
-
-
-
-
-
A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
A
-
-
-
-
-
-
-
Use the first PCI slots that have a single PCI IRQ Line (no IRQ sharing). If you must use another  
PCI slot with IRQ sharing, check whether the expansion card properly supports IRQ sharing with the  
other devices on this PCI IRQ Line. The drivers of all cards and components on this PCI IRQ Line  
must also support IRQ sharing.  
20 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add-on modules / Upgrading  
Replacing lithium battery  
In order to permanently save the system information, a lithium battery is installed to provide the  
CMOS-memory with a current. A corresponding error message notifies the user when the charge is  
too low or the battery is empty. The lithium battery must then be replaced.  
Incorrect replacement of the lithium battery may lead to a risk of explosion!  
!
The lithium battery may be replaced only with an identical battery or with a type  
recommended by the manufacturer.  
Do not throw lithium batteries into the household waste. They must be disposed of in  
accordance with local regulations concerning special waste.  
Make sure that you insert the battery the right way round. The plus pole must be on the  
top!  
The lithium battery holder exists in different designs that function in the same way.  
3
2
3
2
3
1
Ê
Press the locking lug in the direction of the arrow; the battery jumps somewhat out of the  
holder (1).  
Ê
Ê
Remove the battery (2).  
Insert a new lithium battery of the same type into the socket (3).  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 21  
Add-on modules / Upgrading  
BIOS update  
When should a BIOS update be carried out?  
Fujitsu Siemens Computers makes new BIOS versions available to ensure compatibility to new  
operating systems, new software or new hardware. In addition, new BIOS functions can also be  
integrated.  
A BIOS update should always also be carried out when a problem exists that cannot be solved with  
new drivers or new software.  
Where can I obtain BIOS updates?  
The BIOS updates are available on the Internet at www.fujitsu-siemens.de/mainboards.  
How does a BIOS update work?  
You have two ways of doing this:  
1. BIOS update under DOS with bootable BIOS update floppy disk - brief description  
Ê
Ê
Ê
Ê
Ê
Ê
Download the update file from out website to your PC.  
Insert an empty floppy disk (1.44 MB).  
Run the update file (e.g. 1522103.EXE).  
A bootable update floppy disk is created. Leave this floppy disk in the drive.  
Restart the PC.  
Follow the instructions on screen.  
Detailed information on the BIOS update under DOS is provided in the manual on "BIOS  
Setup" ("Drivers & Utilities" CD).  
i
2. BIOS update under Windows with DeskFlash utility  
A BIOS update can also be carried out directly under Windows with the DeskFlash utility. DeskFlash  
is located on the "Drivers & Utilities" CD (from CD version 2001.05 with DeskViewOEM V5.0). In the  
“Readme” file in the subfolder DeskFlash you will find the installation instructions for DeskFlash.  
Further information on DeskFlash is provided in the file "DeskView.PDF" and in the DeskViewOEM  
online help.  
22 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add-on modules / Upgrading  
BIOS Recovery - Recovering System BIOS  
All BIOS settings are reset to the default values.  
i
Ê
Ê
Open the casing as described in the operating manual.  
Set the switch for "Restore system BIOS" to ON or plug the corresponding jumper (see  
"Settings with switches and jumpers" chapter).  
Ê
Ê
Ê
Close the casing as described in the operating manual.  
Insert a BIOS update floppy disk and start the PC.  
Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you  
hear the signal sequence “short-short- long- long- long" and the diskette access indicator is  
dark. This can take a few minutes.  
Ê
Ê
Open the casing as described in the operating manual.  
Set the switch for "Restore system BIOS" to OFF or remove the corresponding jumper (see  
"Settings with switches and jumpers" chapter.  
Ê
Ê
Ê
Ê
Ê
Close the casing as described in the operating manual.  
Remove the floppy disk from the drive.  
Start the PC and invoke BIOS Setup.  
Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.  
Save the change and terminate BIOS Setup.  
The BIOS recovery has now been completed. The system restarts.  
Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"  
("Drivers & Utilities" CD).  
i
Microcode Update  
What is a microcode update?  
As there are no drivers for processors, Intel offers the possibility from the P6 family (Pentium Pro)  
on to update the command set (microcode) of the processor. This enables minor errors to be  
corrected and the performance to be increased.  
To guarantee the best possible performance and error-free operation, Intel recommends updating  
the microcode regularly. Intel refers to the use of the processor without regular microcode updates  
as operation outside the specifications.  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 23  
Add-on modules / Upgrading  
Safety for processor on Fujitsu Siemens Computers mainboards  
If the processor uses an old or incorrect microcode, error-free operation cannot be ensured. Fujitsu  
Siemens Computers has therefore implemented a function on its mainboards that interrupts the  
booting process if no suitable microcode is available for the installed processor. The output error  
message is  
Patch for installed CPU not loaded. Please run the bios flash update  
diskette.  
This message appears until the microcode update has been carried out. If the computer is  
nevertheless operated without a microcode update, error-free operation is not ensured.  
When should a microcode update be carried out?  
A microcode update should be carried out in the following cases:  
Following installation of a new processor  
When a new microcode update is issued.  
In contrast to the BIOS update, only an updated version of the processor command set is stored.  
The system BIOS remains unaffected by this.  
Microcode update under DOS with bootable microcode update floppy disk - brief description  
Ê
Ê
Ê
Ê
Ê
Ê
Download the update file from out website to your PC.  
Insert an empty floppy disk (1.44 MB).  
Run the update file under DOS (e.g. 1495101.EXE).  
A bootable update floppy disk is created. Leave the floppy disk in the drive.  
Restart the PC.  
Follow the instructions on screen.  
To determine whether the latest microcode update has been loaded, the so-called Patch-ID of the  
processor can be read out.  
Ê
Press the [F1] key in the BIOS Setup.  
The entry CPU / Patch ID is shown on the displayed information page.  
A list with the current processors and the related Patch-IDs is available on the Internet.  
If the processor is not recognised, you also require the microcode update tool for  
processors of the P6 family.  
i
Drivers  
Only when no drivers are installed on your system, or you want to update these, proceed as follows:  
Ê
Ê
Insert the CD "Drivers & Utilities Collection" into the CD ROM drive.  
If the CD does not start automatically, run the START.EXE programme in the main directory of  
the CD.  
Ê
Ê
Select DeskUpdate - Fully automatic installation.  
Follow the screen instructions.  
24 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Annex  
Annex  
Electrical Properties  
Loadability for connections and fuses  
Make sure that the connected devices do not overload the connections.  
i
Fuse No.  
1
Fuse  
Connection  
Maximum loadability  
750 mA  
Keyboard  
Mouse  
Not specified  
Not specified  
Minimum 50 mA  
500 mA  
VGA connector  
USB port A  
USB port B  
USB port C  
USB port D  
USB port E  
USB port F  
2
3
4
5
6
7
500 mA  
500 mA  
500 mA  
500 mA  
500 mA  
500 mA  
500 mA  
500 mA  
500 mA  
500 mA  
500 mA  
The fuses on this mainboard can be used several times (polyfuses). Shortly after the error state has  
been eliminated, the fuses reset to the original state.  
Mainboard current requirement  
You require a Pentium4 power supply nit as per the ATX12V specification for this mainboard. If you  
do not have a PC from Fujitsu Siemens Computers, make sure that the power supply unit provides  
the required amperages.  
Source  
Voltage  
Maximum  
difference  
Maximum current  
ATX12V power supply  
ATX12V power supply  
ATX12V power supply  
ATX12V power supply  
Standby voltage of power  
supply unit  
+12 V  
-12 V  
±5 %  
±10 %  
±5 %  
±5 %  
±5 %  
3 -6 (8) A  
0,05 A  
+5,0 V  
0,9 A  
+3,3 V  
+5.0 V SB  
2,2 (3,4) A  
0.35 (2) A  
The specifications apply to the onboard components and represent the least favourable case. In  
addition, at least 350 mA is required for PCI on 3.3 V, and 500 mA per connected device for USB on  
5 V.  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 25  
Annex  
APM and ACPI system status, energy-saving modes  
System status  
ACPI  
Status*  
APM  
Status  
Power  
LED  
Sleep  
LED  
Power  
consumption  
Wake-up  
time  
Normal  
operation  
G0  
S0  
S1  
On  
To  
Off  
Normal  
Simple energy-  
saving mode  
G1  
Standby  
Off  
To  
Almost like  
normal  
Almost  
immediate  
ly  
Maximum  
energy-saving  
mode **  
S3  
S4  
S5  
RAM,  
wake-up  
components  
ca. 5s  
"Save to DRAM"  
Maximum  
energy-saving  
mode  
Wake-up  
components  
ca. 20s  
"Save To Disk"  
“Soft Off"  
G2  
G3  
Soft Off  
Off  
Nearly zero  
Zero  
Full boot  
time  
Mechanically Off  
Off  
Full boot  
time  
* G = Global status; S = System status  
** The power supply unit must provide sufficiently loadable 5 V standby voltage.  
To use the WOL functionality the power supply must provide a 5 V auxiliary voltage (5VSB) of at  
least 1 A.  
26 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Annex  
Mainboard Revision and BIOS Version  
The compatibility, e.g. with new processors, can be independent of the BIOS version or the revision  
status of the mainboard used. The CPU and BIOS compatibility lists are available on the Internet at  
Mainboard: Revision level  
The revision status of the mainboard exactly identifies which mainboard you have. It is indicated on  
a sticker on the edge of the mainboard:  
D1522-B10 GS 1  
05618476  
Example of revision status of the mainboard D1522-B10 GS 1  
BIOS version  
The BIOS version can be displayed in the BIOS Setup.  
Ê
Ê
Press [F2] during booting to open the BIOS Setup.  
Press [F1].  
The BIOS version is specified on the displayed information page under the entry BIOS Release.  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 27  
Error messages  
Error messages  
This chapter contains error messages generated by the mainboard.  
Available CPUs do not support the same bus frequency – System halted!  
Memory type mixing detected  
Non Fujitsu Siemens Memory Module detected – Warranty void  
There are more than 32 RDRAM devices in the system  
Check whether the system configuration has changed. If necessary, correct the settings.  
BIOS update for installed CPU failed  
This message appears if the microcode update required for the connected processor is not  
contained in the system BIOS.  
Ê
Ê
Boot the system with the inserted Flash BIOS floppy disk.  
Abort the normal Flash BIOS update by answering the question about whether you want to  
perform the update with  
n Ú  
Ê
To carry out the Flash BIOS update for the processor, enter:  
flashbioË/p6 Ú  
Check date and time settings  
The system date and time are invalid. Set the current date and time in the Main menu of the  
BIOS Setup.  
CPU ID 0x failed  
Switch the server off and on again. If the message is still displayed, go into the BIOS setup and  
set the corresponding processor to Disabled in the Server - CPU Status menu; please contact  
your sales outlet or customer service centre.  
CPU mismatch detected  
You have replaced the processor or changed the frequency setting. As a result, the  
characteristic data of the processor have changed. Confirm this change by running the BIOS  
Setup and exiting it again.  
Diskette drive A error  
Diskette drive B error  
Check the entry for the diskette drive in the Main menu of the BIOS Setup. Check the  
connections to the diskette drive.  
28 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Error messages  
DMA test failed  
EISA CMOS not writable  
Extended RAM Failed at offset: nnnn  
Extended RAM Failed at address line: nnnn  
Failing Bits: nnnn  
Fail-Safe Timer NMI failed  
Multiple-bit ECC error occurred  
Memory decreased in size  
Memory size found by POST differed from EISA CMOS  
Single-bit ECC error occurred  
Software NMI failed  
System memory exceeds the CPU’s caching limit  
System RAM Failed at offset: nnnn  
Shadow RAM Failed at offset: nnnn  
Switch the device off and on again. If the message is still displayed, please contact your sales  
outlet or customer service centre.  
Failure Fixed Disk 0  
Failure Fixed Disk 1  
Fixed Disk Controller Failure  
Check the entry for the hard disk drive in the Main menu and the entry for the IDE drive  
controller in the Advanced - Peripheral Configuration menu of the BIOS Setup. Check the hard  
disk drive's connections and jumpers.  
Incorrect Drive A - run SETUP  
Incorrect Drive B - run SETUP  
Correct the entry for the diskette drive in the Main menu of the BIOS Setup.  
Invalid NVRAM media type  
Switch the device off and on again. If the message is still displayed, please contact your sales  
outlet or customer service centre.  
Invalid System Configuration Data  
In the Advanced menu of the BIOS Setup set the entry Reset Configuration Data to Yes.  
Invalid System Configuration Data - run configuration utility  
Press F1 to resume, F2 to Setup  
This error message may be displayed if the machine was switched off during system start-up.  
Call BIOS Setup and switch to the Advanced menu. Select the menu item Reset Configuration  
Data and change the setting to Yes. Save the change and terminate BIOS Setup. Reboot the  
device.  
Keyboard controller error  
Connect another keyboard or another mouse. If the message is still displayed, please contact  
your sales outlet or customer service centre.  
Keyboard error  
Check that the keyboard is connected properly.  
Keyboard error nn  
nn Stuck Key  
Release the key on the keyboard (nn is the hexadecimal code for the key).  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 29  
Error messages  
Missing or invalid NVRAM token  
Switch the device off and on again. If the message is still displayed, please contact your sales  
outlet or customer service centre.  
Monitor type does not match CMOS - RUN SETUP  
Correct the entry for the monitor type in the Main menu of the BIOS Setup.  
On Board PCI VGA not configured for Bus Master  
In the BIOS Setup, in the Advanced menu, submenu PCI Configuration, set the Shared PCI Master  
Assignment entry to VGA.  
One or more RDRAM devices are not used  
One or more RDRAM devices have bad architecture/timing  
One or more RDRAM devices are disabled  
Contact your system administrator or contact our customer service centre.  
Operating system not found  
Check the entries for the hard disk drive and the floppy disk drive in the Main menu and the  
entries for Boot Sequence submenu of the BIOS Setup.  
Parity Check 1  
Parity Check 2  
Switch the device off and on again. If the message is still displayed, please contact your sales  
outlet or customer service centre.  
Previous boot incomplete - Default configuration used  
By pressing function key [F2] you can check and correct the settings in BIOS Setup. By  
pressing function key [F1] the system starts with incomplete system configuration. If the  
message is still displayed, please contact your sales outlet or customer service centre.  
Real time clock error  
Call the BIOS Setup and enter the correct time in the Main menu. If the message is still  
displayed, please contact your sales outlet or customer service centre.  
Service Processor not properly installed  
The server management controller has not been correctly installed. If the message is still  
displayed, please contact your sales outlet or customer service centre.  
Storage Extension Group = xy  
Configuration error, x Storage Extensions(s) found, configured are y  
SE(s).  
Device List: k1, k2 ...  
The specified number of storage expansion units (SEs) in the BIOS Setup menu Server - Storage  
Extensions - Number of connected SE is incorrect. Check how many SEs within the group are  
connected at the server and change the setting in BIOS Setup. Check whether you have  
assigned the same device ID twice.  
xy = Group number  
x = Number of SEs found on the communication bus  
y = Number of SEs entered in Number of connected SE  
k1, k2 ... = Device ID of the storage extensions found  
30 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Error messages  
System battery is dead - Replace and run SETUP  
Replace the lithium battery on the mainboard and redo the settings in the BIOS Setup.  
System Cache Error - Cache disabled  
Switch the device off and on again. If the message is still displayed, please contact your sales  
outlet or customer service centre.  
System CMOS checksum bad - - Default configuration used  
Call the BIOS Setup and correct the previously made entries or set the default entries.  
System Management Configuration changed or Problem occurred  
A system fan or system sensor has failed. Check the hardware operation.  
System timer error  
Switch the device off and on again. If the message is still displayed, please contact your sales  
outlet or customer service centre.  
Uncorrectable ECC DRAM error  
DRAM Parity error  
Unknown PCI error  
Switch the device off and on again. If the message is still displayed, please contact your sales  
outlet or customer service centre.  
Verify CPU frequency selection in Setup  
The frequency setting for the processor is invalid. Correct the BIOS Setup and the setting.  
DOS error messages  
This chapter contains the error messages that occur while DOS is running.  
If a uncorrectable error occurs while DOS is running, then the following error text is output on the  
screen:  
Critical error logged to server management processor - system halted  
If the NMI button of the control panel is pressed, then the following error text is output on the screen:  
Frontpanel NMI activated - system halted  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 31  
Error messages  
SmartCard reader - error messages  
This chapter contains error messages generated by the SmartCard reader (chipcard reader).  
Boot access denied  
The Sicrypt SmartCard has no access rights to the system.  
Check your chipcard  
Either the Sicrypt SmartCard has been wrongly inserted, or it is not a PC-Lock Sicrypt card.  
Chipcard reader FAIL  
An error has occurred on the serial port to the SmartCard reader (chipcard reader). If this error  
occurs always or often, the connection between the SmartCard reader and the mainboard must  
be checked, or the SmartCard reader must be replaced. While the error is present, access to  
the system is blocked.  
Non authorized chipcard  
The Sicrypt SmartCard cannot be used on this PC. The Sicrypt SmartCard has been  
configured for a different PC.  
PC-Lock installation FAIL:  
An error has occurred during installation of PC Lock. Do not switch off, but insert the  
"BIOS Flash diskette", and try the installation again.  
The chipcard is blocked.  
Enter the Admin PIN:  
You have exceeded the maximum number of failed attempts to enter the PIN. The Sicrypt  
SmartCard is blocked.  
Enter the administrator PIN to re-activate the Sicrypt SmartCard. You must then enter a new  
User PIN to restart the system.  
32 - English  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Error messages  
Glossary  
The technical terms and abbreviations given below represent only a selection of the full list of  
common technical terms and abbreviations.  
Not all technical terms and abbreviations listed here are valid for the described mainboard.  
ACPI  
Advanced Configuration and  
Power Management Interface  
Audio Codec '97  
Accelerated Graphics Port  
Audio Modem Riser  
ISA  
Industrial Standard Architecture  
AC'97  
AGP  
AMR  
AOL  
APM  
ATA  
LAN  
LSA  
MCH  
MMX  
P64H  
PCI  
Local Area Network  
LAN Desk Service Agent  
Memory Controller Hub  
MultiMedia eXtension  
PCI64 Hub  
Alert On LAN  
Advanced Power Management  
Advanced Technology  
Attachment  
Peripheral Component  
Interconnect  
BIOS  
BMC  
Basic Input Output System  
Baseboard management  
controller  
PXE  
RAM  
Preboot eXecution Environment  
Random Access Memory  
CAN  
CPU  
Controller Area Network  
RAMDAC  
RDRAM  
Random Access Memory Digital  
Analogue Converter  
Rambus Dynamic Random  
Access Memory  
Central Processing Unit  
CNR  
C-RIMM  
Communication Network Riser  
Continuity Rambus Inline  
Memory Module  
RIMM  
RTC  
Rambus Inline Memory Module  
Real Time Clock  
DIMM  
ECC  
Dual Inline Memory Module  
Error Correcting Code  
SB  
SDRAM  
Soundblaster  
Synchronous Dynamic Random  
Access Memory  
EEPROM  
FDC  
Electrical Erasable  
Programmable Read Only  
Memory  
SGRAM  
SIMD  
Synchronous Graphic Random  
Access Memory  
Floppy disk controller  
Streaming Mode Instruction  
(Single Instruction Multiple Data)  
System Management Bus  
Super Video Graphic Adapter  
Universal Serial Bus  
FIFO  
FSB  
FWH  
GMCH  
First-In First-Out  
Front Side Bus  
Firmware Hub  
Graphics and Memory Controller  
Hub  
SMBus  
SVGA  
USB  
VGA  
Video Graphic Adapter  
GPA  
Graphics Performance  
Accelerator  
Inter Integrated Circuit  
Instantly Available Power  
Managed Desktop PC Design  
I/O Controller Hub  
WOL  
Wake On LAN  
I2C  
IAPC  
ICH  
IDE  
IPSEC  
Intelligent Drive Electronics  
Internet Protocol Security  
A26361-D1522-Z120-3-6319  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 33  

Contec Universal Remote A189C User Manual
Cooper Lighting Landscape Lighting GAR C User Manual
Dimplex Fan XL6N User Manual
Fisher Price Baby Toy 73455 User Manual
Fisher Price Video Game Console R9701 User Manual
Frigidaire Air Conditioner P N 66121621 User Manual
Gefen Network Router EXT HD DSWF User Manual
GE Monogram Oven ZGU36N6DSS User Manual
GE Oven JGRP17BEW User Manual
Gitzo Camcorder Accessories G1327 User Manual