Fujitsu Flat Panel Television P42VCA10 User Manual

USER’S MANUAL  
42”/50” WIDE PLASMA DISPLAY  
P42VCA10/P42HCA10/P50XCA10/  
P42VCA11/P42HCA11/P50XCA11/  
P42VCA12/P42HCA12/P50XCA12  
WITH OPTIONAL VIDEOBOARD (P-TE1020E)  
Contents  
Page  
Page  
Before Use  
Adjustments  
• Safety Precautions ··································· E-2–E-3  
• Features ····························································E-4  
• Accessories ······················································ E-5  
• Handy Tips ······················································· E-5  
• Installation ······················································· E-6  
• Adjusting Pictures (PICTURE Menu)··· E-20–E-21  
• Adjusting Screen Position and Size  
(POSITION/SIZE Menu) ························ E-22–E-23  
• Adjusting Audio (AUDIO Menu) ········· E-24–E-25  
Other Adjustments (FEATURES Menu)··· E-26–E-33  
Usage  
• Initialization of User Adjustment Value  
• Part Names and Functions ····················· E-7–E-11  
• Using the Remote Control ·····························E-12  
• Connecting the Display to External  
Equipment ············································ E-13–E-15  
• Basic Operations ············································E-16  
• Selecting Input Mode·····································E-17  
(FACTORY DEFAULT) ·····································E-34  
Others  
• Options·················································· E-35–E-36  
• Factory Settings ············································ E-37  
• Specification ········································· E-38–E-40  
• Cleaning and Maintenance····························E-41  
Watching Pictures on the Wide Screen ··· E-18–E-19  
Before using the display, read this manual carefully so that you know how to use the display correctly.  
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the  
safety precautions.  
Keep this manual where the user can see it easily.  
* Installation and removal require special expertise. Consult your product dealer for details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain  
or moisture, dose not operate normally, or has been dropped.  
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
Do not use attachments not recommended by the product manufacturer as they may cause hazards.  
Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,  
electric shock, or other hazards.  
The apparatus shall not be exposed to dripping or splashing.  
No objects filled with liquids, such as vases, shall be placed on the apparatus.  
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious  
damage to the product. The product should be mounted according to the manufacturers instructions, and should use a mount  
recommended by the manufacturer.  
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the  
product and cart to overturn, damaging equipment or causing possible injury to the operator.  
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from  
overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed,  
sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is  
provided and the manufacturers instructions have been adhered to.)  
For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.  
This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power  
supply of your home, consult your product dealer or local power company.  
This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug  
into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay  
particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.  
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it  
from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.  
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric  
shock.  
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that  
could result in a fire or electric shock. Never spill liquid of any kind on the product.  
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.  
Refer all service to qualified service personnel.  
Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following  
the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls  
may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.  
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with  
same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.  
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the  
product is in proper operating condition.  
The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products  
(including amplifiers) that produce heat.  
When connecting other products such as VCRs, and personal computers, you should turn off the power of this product for protection  
against electric shock.  
Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special  
hazards when overheated.  
Use only the accessory cord designed for this product to prevent shock.  
The power supply voltage rating of this product is AC110240 V (42) and AC220240 V (50W, 50E, 50A type) and AC 120 V (50U  
type), and the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to  
ensure Safety and EMC.  
When it is used with other power supply voltage, the power cable must be changed.  
Power cord  
Use the standard power plug and cord set of the specified country.  
Consult your product dealer.  
Power supply voltage:  
AC 100–125 V  
(42”W, 50”U Type: Included)  
AC 200–240 V  
AC 240 V (SAA TYPE)  
(42”E, 50”W, 50”E Type: (42”A, 50”A Type: Included)  
Included)  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
This display uses a plasma display panel and is only 8.5 cm (42) /9.8 cm (50) deep. With its high picture quality and performance, it is  
perfectly suited for multimedia applications.  
Variety of input signals  
RGB input is compatible with mD-sub terminals and BNC terminals.  
The display has an RGB input terminal to receive signals, including VGA, SVGA, XGA,SXGA and UXGA.  
5 screen sizes (Video input mode) and 3 screen sizes (RGB input mode)  
This display offers a total of five different screen sizes in video input mode: Wide1, Wide2, Zoom1, and Zoom2.  
A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.  
Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.  
Vertical installation  
The display can be installed vertically, enabling advertisement to be displayed. In this case, you can set up the display so that on-screen  
information, such as input modes and menus, is displayed properly.  
Power management function  
The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.  
Flexible as part of a system  
You can operate the display by remote control using the RS-232C interface.  
If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.  
Input Priority function for selecting automatic switching to desired mode is provided to avoid troublesome operation.  
Others  
The white screen and screen orbiter functions are available to minimize phosphor burn-in.  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
CHECKING ACCESSORIES  
One users manual One power cable  
Two big ferrite  
cores  
Two small ferrite  
cores  
One remote control Two AA batteries  
Manual  
(42W, 50U Type)  
(P42VCA11/  
P42HCA11/  
P50XCA11 only)  
(42E, 50W, 50E Type)  
(42A, 50A Type)  
HANDY TIPS  
Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42)/  
1.9 m or 6.3 feet (50)) from the screen and to look occasionally away while working.  
Have the display inspected and cleaned by your dealer at regular intervals.  
Pictures may become burntinto the screen phosphors if the screen is left on for extended periods. To ensure that the display has a  
prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly  
displayed for long periods. (See P. E-31E-32.)  
The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however,  
that some pixels constantly remain lit or dimmed.  
The display has a fan to prevent its internal temperature from rising.  
Be careful with the air delivered by the fan. It may be very hot.  
Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.  
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote  
control does not function properly.  
Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer  
for more information.  
The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see  
that the power indicator lamp flashes red.  
Warning  
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the  
power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on  
P. E-41, or contact your dealer.  
Information  
Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
To prevent the displays internal components from overheating, make sure that the display is installed in a well-ventilated location.  
Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be  
sure that your dealer performs the installation.  
See the appropriate instruction manual for more information on the installation hardware you select.  
To ensure proper heat radiation, provide at least as much space around the display as shown below.  
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.  
* Never attempt to tilt the display sideways or backward.  
* To prevent the power and other cables from being accidentally pulled, be sure to make the wiring work along the wall or through the  
corners of floor.  
* To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.  
Horizontal type  
Front  
Side  
(cm)  
(cm)  
Upper  
10  
10  
10  
Left  
Right  
Wall  
5
Lower  
4
Note  
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing  
materials originally supplied with the display when repacking it.  
Reference  
See P.E-35 for more information on options.  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS  
Front (both 42" and 50")  
1 Power indicator lamp  
This lamp shows the state of the power supply.  
Lit (red):  
Power OFF (stand-by)  
Power ON  
Lit (green):  
Lit (orange): Power saving (DPMS: Power saving  
function) mode ON  
Flashing (red): Malfunction (Flashes differently depending  
on the type of malfunction. See P. E-41 for  
more information.)  
①�  
②�  
2 Remote control signal receiver  
Receives signals from the remote control.  
Warning  
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the  
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
Bottom (42” VCA type)  
Bottom (42” HCA type)  
Bottom (50”)  
1 OFF/STD-BY switch  
OFF  
STD-BY :The power indicator lamp lights red, and the power can be turned on or off by the power button.  
2 RS-232C terminal (RS-232C)  
:The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied.  
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.  
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)  
3 RGB1 input terminal (RGB1 INPUT/mD-sub)  
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.  
4 Power input terminal  
Connect this terminal to the power cable supplied with the display.  
When connecting a cable,attach a ferrite core to the cable. (See P. E-13)  
5 External speaker output terminal (EXT SP)  
Connect this terminal to the optionally available speaker.  
(When using other speaker than the optional one, use 4–16 speaker.)  
When connecting a cable,attach a ferrite core to the cable. (See P. E-13)  
* See the speaker instruction manual for more information.  
* P42VCA11/P42HCA11/P50XCA11 only.  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Sound 1 input terminal (AUDIO1 INPUT)  
7 Sound 2 input terminal (AUDIO2 INPUT)  
8 Sound 3 input terminal (AUDIO3 INPUT)  
Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-30 for the selection of audio input for video input.)  
* This terminal is not available for P42VCA10/P42HCA10/P50XCA10.  
9 RGB2 input terminal (RGB2 INPUT/BNC)  
Connect this terminal to the PCs display (analog RGB) output terminal.  
0 RGB2 synchronization switch (SYNC SW TTL/ANALOG (75 ))  
This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB2 input terminals, with 75 .  
TTL  
: Does not terminate.  
ANALOG (75 ): Terminates.  
A Video input terminal (VIDEO INPUT)  
Connect this terminal to the video output terminal of your VCR.  
B S-Video input terminal (S-VIDEO INPUT)  
Connect this terminal to the S-video output terminal of your VCR.  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
Description of Input Terminals  
RGB1 terminal (RGB1 INPUT/mD-sub)  
Pin No. Input signal Pin No.  
Input signal  
1
2
3
4
5
6
7
8
Red  
9
Green  
Blue  
10  
Ground  
11  
12  
Ground  
Ground  
Ground  
Ground  
13  
Horizontal synchronization  
14  
Vertical synchronization  
15  
Frame  
Ground  
RS-232C terminal (RS-232C)  
Pin No.  
Signal  
1
2
3
4
5
6
7
8
9
DCD (Data Carrier Detect)  
RD (Received Data)  
TD (Transmit Data)  
DTR (Data Terminal ready)  
GND (Ground)  
DSR (Data Set Ready)  
RTS (Request To send)  
CTS (Clear To Send)  
RI (Ring Indication)  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
1 Power ON button [POWER ON]  
(See P. E-16.)  
2 Power OFF button [POWER OFF]  
(See P. E-16.)  
1
3
2
3 RGB input mode selector button [RGB]  
4 Video input mode selector button [VIDEO]  
5 Wide screen selector button [WIDE]  
6 Menu button [MENU]  
(See P. E-17.)  
5
4
(See P. E-17.)  
(See P. E-18E-19.)  
(See P. E-20E-34.)  
6
7
8
Use this button to display a desired menu for adjusting the picture.  
7 Volume adjustment buttons [VOL +/-]  
(See P. E-16.)  
9
Adjust the volume.  
Press the + button to increase the volume.  
Press the - button to reduce the volume.  
* Not used with P42VCA10/P42HCA10/P50XCA10.  
8 Adjustment buttons [  
/
/
/
]
(See P. E-20E-34.)  
=
Use these buttons to scroll through options in a menu and change values.  
9 Enter button [ENTER]  
(See P. E-20E-34.)  
Press this button to finalize the selection of a desired menu or option within a menu.  
0 Display selector buttons [SHIFT 14]  
(See P. E-32.)  
When you use two or more displays, you can use these buttons to control up to four displays  
by assigning a unique number to each display.  
PUTTING BATTERIES IN THE REMOTE CONTROL  
1 To remove the cover, slide it  
2 Place two AA batteries in the  
remote control. Make sure that the  
batteries are properly oriented.  
3 Close the cover until it snaps into  
outwards while pressing it down.  
place.  
CAUTION: Be sure to use replacement batteries of the same type as the original ones.  
When disposing of used batteries, please comply with governmental regulations or environmental  
public institutions rules that apply in your country/area.  
Note  
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.  
Do not use rechargeable batteries (Ni-Cd).  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL  
PRECAUTIONS  
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.  
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or  
heating equipment.  
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.  
EFFECTIVE RANGE FOR THE REMOTE CONTROL  
Point the remote control at the displays signal receiver when using it.  
Make sure that there are no obstacles between the remote control and the displays signal receiver.  
Upper  
20°  
20°  
Lower  
30°  
5 m (Front)  
30°  
Left  
Right  
Information  
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the  
remote control from a different position.  
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT  
Be sure to turn OFF the power to the display and external equipment before making any connections.  
No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC  
model. Contact your dealer for more information.  
RECEPTACLE  
Make sure that the power cables grounding wire is grounded.  
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you  
will need to have it replaced. Contact your dealer for more information.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT  
Carefully check the terminals for position and type before making any connections.  
Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.  
Ferrite cores  
These ferrite cores are used to attenuate undesired signals.  
Two big ferrite cores  
When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.  
Power Cable  
Ferrite Core  
RS-232C Cable  
Ferrite Core  
Two small ferrite cores  
When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.  
Ferrite Core  
Ferrite Core  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)  
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS  
Speaker  
Speaker (optional)  
Display  
Remote  
control  
VCR or other external  
components See P.  
VCR  
PC  
VCR  
Connect the video signal cable to either the S-video input terminal or the video input terminal.  
To audio  
output  
To video output  
To S-video output  
To audio input  
To S-video input  
To video input  
Bottom of Display (Ex.: P42VCA11 series)  
E-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC  
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.  
To RGB output (mD-sub)  
To audio output  
To audio  
input  
To RGB1 input  
(mD-sub)  
Bottom of Display (Ex.: P42VCA11 series)  
Note  
Unplug the power cord from the AC outlet before you connect external components.  
Also refer to the instructions for the component to be connected.  
* When inputting voice see Selecting input terminals (page E-30)”  
* The sound terminal is not available for P42VCA10/P42HCA10/P50XCA10.  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
TURNING ON THE POWER  
Press  
on the remote  
1
2
control.  
When you do so, the power indicator lamp turns  
green.  
Press  
desired input mode.  
or  
to select a  
TURNING OFF THE POWER  
Press  
when the power is ON.  
The power indicator lamp turns red.  
ADJUSTING THE VOLUME  
Press  
Press  
to increase the volume.  
to reduce the volume.  
Any value between 0 and 40 can be selected.  
* “No Audio” appears if you press or after you have  
selected “No Audio” for “Audio Input”. (See P. E-30.)  
When the volume adjustment button is pressed  
* Note that the volume level remains stored even when you  
turn OFF the power.  
* Not used with P42VCA10/P42HCA10/P50XCA10.  
E-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING INPUT MODE  
VIDEO INPUT MODE  
Press  
to select a desired input  
1
mode.  
Each time you press , a different input mode  
appears. The sequence is as follows:  
Video:  
Displays pictures from equipment  
connected to the Video terminal.  
S-video mode  
S-video:  
Displays pictures from equipment  
connected to the S-video terminal.  
RGB INPUT MODE  
Press  
to select a desired  
1
input mode.  
Each time you press  
appears. The sequence is as follows:  
, a different input mode  
RGB1:Displays pictures from equipment  
connected to the RGB1 (mD-sub) terminal.  
RGB1 mode  
RGB2:Displays pictures from equipment  
connected to the RGB2 (BNC x 5)  
terminal.  
RGB2 mode  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING PICTURES ON THE WIDE SCREEN  
SWITCHING BETWEEN SCREEN SIZES  
Press  
.
1
2
The currently selected mode will appear.  
Press  
picture mode.  
to select a desired  
Normal mode  
Each time you press , a different picture mode  
appears. The sequences used are as follows:  
When you are in a Video or S-video input mode  
When you are in an RGB input mode  
Wide1 mode  
* Depending on the type of signal, some aspects  
may not be selected.  
Note  
Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.  
A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame  
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same  
aspect ratio.  
Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making  
purposes or for a public audience may constitute a copyright infringement.  
For films, try to select a mode having the same aspect ratio as the original picture; this enables the directors original intentions to be preserved.  
Reference  
See P. E-22E-23 for how to adjust the picture size and position.  
E-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCREEN SIZE  
Normal  
Displays pictures of normal size (i.e., a 4:3 aspect ratio).  
Wide1  
Displays natural-looking pictures of standard size on the wide screen.  
Picture of  
Wide1  
Wide2  
Zoom1  
standard size  
Wide2/Wide  
Ideal for displaying vertically extended pictures such as squeezed pictures and recorded  
HDTV programs.  
Vertically  
extended picture  
Zoom1/Zoom  
Enlarges horizontally extended pictures equally in all directions to maintain the aspect  
ratio constant.  
Horizontally  
extended picture  
Zoom2  
Reduces the height of horizontally extended pictures with captions, without eliminating  
the caption. Only the height of pictures is reduced, not the height of the caption.  
Horizontally extended  
picture with caption  
Zoom2  
(Captions may not be easy to read, however, depending on the picture.)  
ASPECT RATIO  
The following aspect ratios are available.  
4:3 aspect ratio  
4
16:9 aspect ratio  
16  
(VHF/UHF broadcasting, BS broadcasting)  
(HDTV broadcasting)  
3
9
1.85  
2.35  
1.85:1 aspect ratio  
(Vista Vision size)  
1
2.35:1 aspect ratio  
(Cinema Vision size)  
1
Information  
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema  
Vision size i.e., the sizes used frequently for picture software.  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING PICTURES (PICTURE MENU)  
BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]  
You can make changes to all picture adjustment options in the PICTURE Menu.  
The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
Press  
.
1
2
The main menu screen will appear.  
Press  
“PICTURE”.  
or  
to select  
“PICTURE” selected in the main menu  
screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
AUDIO  
FEATURES  
FACTORY DEFAULT  
The PICTURE Menu screen will appear.  
Press  
Press  
or  
to select “Tint”.  
3
4
.
The “Tint” adjustment screen will appear.  
“Tint” selected in the PICTURE Menu  
screen (Video Input Mode)  
Press  
values.  
or  
to change tint  
5
6
: More greenish tint  
: More purplish tint  
“Tint” adjustment screen  
Press  
to store.  
Press  
when you finish.  
* Repeat steps 3, 4, 5, and 6 when you wish to  
make changes to other options.  
E-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart.  
Select the item with  
, and then adjust with  
. Finally, press  
to implement the adjustments.  
Adjustment Item  
Adjustment Range/Remarks  
Contrast  
Lower contrast  
Darker screen  
Higher contrast  
Brighter screen  
Darker colors  
30 to +30  
60 to +60  
60 to +60  
Brightness  
Color  
Lighter colors  
Tint  
More purplish colors  
More greenish colors  
60 to +60 (RGB)  
30 to +30 (Video, S-video)  
Sharpness  
Softer pictures  
Sharper pictures  
4 to +4 (RGB)  
16 to +16 (other than RGB)  
Setting Picture Mode (Picture Mode)  
Can set up the picture mode.  
Each time you press or , one of the available choices appears in the following sequence:  
Dynamic: Suitable for watching a normal motion picture.(Standard)  
Real:  
Static:  
Press  
Makes a strong contrast picture.  
Suitable for watching a still picture.  
to store.  
* Select Dynamic, Real or Static to suit your taste.  
Setting Luminance (Luminance)  
Luminance can be set.  
Use or to select a value between 40 and 100.  
Press  
to store.  
* Settings can only be done when the Picture Mode is Static.  
Adjusting Color Temperature (Color Temp.)  
Use or to specify a desired color temperature. Each time you press or , one of the  
available choices appears in the following sequence:  
3500: More reddish colors  
Standard: Standard color temperature  
+3500: More bluish colors  
User:  
User Color Temp. setup  
Press  
to store.  
Setting User Color Temp. (User Color Temp.)  
Can set up when User is selected in Color Temp.  
Press  
or  
to select Red, Green or Blue and press or to make adjustment in the range  
of 0 to 255.  
Press  
to store.  
* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted  
individually at the factory.  
User Color Temp.adjustment screen  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)  
BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN  
POSITION  
]
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.  
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
Press  
.
1
2
The main menu screen will appear.  
Press  
POSITION/SIZE.  
or  
to select  
POSITION/SIZEselected from the main  
menu screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
AUDIO  
FEATURES  
FACTORY DEFAULT  
The POSITION/SIZE Menu screen will appear.  
Press  
Position.  
or  
to select  
3
4
Press  
.
The Positionadjustment screen will appear.  
Press  
or  
to select  
Horizontalvalues of screen  
position.  
5
6
Press  
or  
to change  
horizontal values.  
:
:
Moves screen to the right.  
Moves screen to the left.  
Positionadjustment screen  
Press  
Press  
to store.  
7
when you finish.  
* Repeat steps 3 to 7 when you wish to make  
changes to other options.  
E-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Screen Position (Position)  
Horizontal position (Horizontal)  
:
:
Moves screen to the right.  
Moves screen to the left.  
Positionadjustment screen  
Vertical position (Vertical)  
:
Moves screen up.  
Moves screen down.  
to store.  
:
Press  
Adjusting Screen Size (Size)  
Screen width (Width)  
:
:
Increases width.  
Reduces width.  
Sizeadjustment screen  
Screen height (Height)  
:
Increases height.  
Reduces height.  
to store.  
:
Press  
Setting Range  
Video, S-video mode  
RGB mode  
Position  
Horizontal: -30 to +30  
Vertical  
-150 to +150  
Zoom:  
-15 to +15  
Others: -7 to +7  
Size  
-3 to +12 (P42HCA10/11/12)  
-7 to +16 (P42VCA10/11/12)  
-7 to +12 (P50XCA10/11/12)  
-12 to +25 (P42HCA10/11/12)  
-25 to +50 (P42VCA10/11/12, P50XCA10/11/12)  
* Depending on the input signal, the adjustment range may differ.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING AUDIO (AUDIO MENU)  
BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]  
You can make changes to all sound adjustment options in the AUDIO Menu.  
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select AUDIO.  
AUDIOselected in the main menu screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
AUDIO  
FEATURES  
FACTORY DEFAULT  
The AUDIO Menu screen will appear.  
AUDIO�  
Press  
Balance.  
or  
to select  
Treble�  
0�  
---------�  
Bass�  
0�  
0�  
3
4
---------�  
Balance�  
---------�  
Press  
.
<> adjust�  
The Balanceadjustment screen will appear.  
Balanceselected in the AUDIO Menu  
screen  
Press  
or  
to adjust the  
balance.  
5
6
: Higher volume from the right-hand speaker  
: Higher volume from the left-hand speaker  
Press  
to store.  
Press  
when you finish.  
* Repeat steps 3 to 6 when you wish to make  
changes to other options.  
* Audio Input menu will not be displayed when  
No Audiois selected. (See P. E-30.)  
E-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO�  
Adjusting Treble (Treble)  
Any value between -6 and +6 can be selected.  
: Stronger treble  
Each audio input  
Each audio input  
Each audio input  
Each audio input  
Treble�  
0�  
0�  
0�  
---------�  
Bass�  
---------�  
Balance�  
---------�  
: Weaker treble  
Adjusting Bass (Bass)  
Any value between -6 and +6 can be selected.  
: Stronger bass  
<> adjust�  
Trebleselected in the AUDIO Menu  
screen  
: Weaker bass  
Adjusting Volume Balance (Balance)  
Any value between -10 and +10 can be selected.  
: Higher volume from the right-hand speaker  
: Higher volume from the left-hand speaker  
Setting Loudness (Loudness)  
Corrects the balance between bass and treble for easy listening even with weak volume.  
Each time you press or , one of the available choices appears in the following  
sequence:  
On  
Off  
On : Corrects bass and treble.  
Off : Loudness dose not function.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
* Cannot be set with P42VCA10/P42HCA10/P50XCA10.  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU)  
BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]  
You can make the following changes in the FEATURES Menu.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select “FEATURES”.  
“FEATURES” selected in the main menu  
screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
AUDIO  
FEATURES  
FACTORY DEFAULT  
The FEATURES Menu screen will appear.  
Press  
Menu".  
or  
to select "On Screen  
3
4
• Select a desired option for adjustment/setup from  
Adjustment, Function, On Screen Menu, Input  
Terminal and Others.  
Press  
.
On Screen Menu screen  
• On Screen Menu appears.  
Press  
“Language”.  
or  
to select  
5
6
Press  
.
The “Language” selection screen will appear.  
“Language” selection screen  
Press  
language.  
or  
to select the  
7
8
Press  
.
The menu is displayed in the selected language.  
Press  
when you finish.  
* Repeat steps 3 to 8 when you wish to make changes  
to other options.  
E-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES setup screen has the following 4 options.  
Adjustment  
: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.  
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-28.)  
Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-28E-29.)  
Others  
: Can make other settings. (See P. E-30E-33.)  
ADJUSTMENT  
Adjusting Dot Clock (Dot Clock)  
for RGB  
for RGB  
You may find that pictures blur, depending on the clock frequency of your PCs processor.  
If you experience blurring, you can obtain a clearer picture by adjusting the Dot Clock.  
Use or to select a value between -60 and +60.  
Press  
to store.  
Adjusting Clock Phase (Clock Phase)  
You may find that pictures blur, depending on the clock phase of your PCs processor. If you  
experience blurring, you can obtain a clearer picture by adjusting the Clock Phase.  
Use  
or  
to select "Auto" or "Manual".  
Makes automatic adjustment.  
Auto:  
Manual: Makes manual adjustment.  
Use or to specify a value between 1 and 32.  
When selecting Manual by Clock Phase  
Press  
to store.  
Adjusting Clamp Position (Clamp Position)  
for RGB  
Adjusts clamp pulse in accordance with the input signal received from connected equipment.  
Use or to specify a value between -8 and 8.  
Press  
to store.  
Selecting the Optimum Dynamic Range of Images (Auto Calibration)  
for RGB  
Receives a white screen signal and adjusts the dynamic range of images to the optimum.  
(1) Select Auto Calibration and press  
Auto Calibration screen appears.  
(2) Select Execute and press  
.
.
Press  
Yes: Stores the data of Auto Calibration.  
No: Disables the execution result of Auto Calibration.  
or  
to select Yes or No.  
"Auto Calibration" setting screen  
(3) Press  
to execute.  
"Yes/No" screen to select  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)  
ON SCREEN MENU  
Setting Display Information (OSD)  
You can use this option to select whether to display information other than menus. (Error messages  
are displayed regardless of what choice you make for this option.)  
Each time you press , one of the available choices appears in the following sequence:  
On  
Off  
On : Displays all information.  
Off : Displays only menus and error messages.  
Press  
to store.  
Selecting Language (Language)  
You can use this option to select the language displayed on the screen.  
(1) Select Languageand press  
The Languageselection screen will appear.  
(2) Press or to select your desired language.  
English  
.
Deutsch (German)  
Español (Spanish)  
Français (French)  
Italiano (Italian)  
"Language" selection screen  
Português (Portuguese)  
Pyccкий(Russian)  
(3) Press  
.
The menu is displayed in the selected language.  
* Russian can only be set with the E-model.  
INPUT TERMINAL  
Selecting Video Mode (Video Input)  
You can use this option to select the desired video mode of pictures it will receive to the Video Input  
terminal.  
Each time you press or , one of the available modes appears in the following sequence:  
Auto:  
Automatically selects NTSC, PAL and SECAM.  
Other than Auto: You need to select a system appropriate to the input signal.  
Press  
to store.  
Selecting Video Mode (S-video Input)  
You can use this option to select the desired video mode of pictures it will receive to S-video Input  
terminal.  
Each time you press or , one of the available modes appears in the following sequence:  
Auto:  
Other than Auto: You need to select a system appropriate to the input signal.  
Press to store.  
Automatically selects NTSC, PAL and SECAM.  
E-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting BNC Input (BNC-Input)  
You can use this option to select the signal system it will receive to BNC Input terminal.  
(1) Select BNC Input and press  
BNC Input screen appears.  
.
(2) Select the signal system to receive.  
Each time you press or , one of the available choices appears in the following  
sequence:  
"BNC-Input" selection screen  
RGB-Video: For using 0.3V input of sync. signal level with RGB signal input.  
RGB-PC:  
Decoder:  
For using PC wih RGB signal input.  
For using decoder with RGB signal input.  
to select Mask.  
(3) Press  
or  
(4) Select RGB-Video or Decoder by FUNCTION to set up Mask.  
Each time you press or , one of the available choices appears in the following  
sequence:  
This fringe part is masked.  
Off:  
Does not mask.  
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.  
(5) Press  
to store.  
Selecting D-SUB Input (D-SUB Input)  
You can use this option to select the signal system it will receive to D-SUB Input terminal.  
(1) Select D-SUB Input and press  
D-SUB Input screen appears.  
.
(2) Select the signal system to receive.  
Each time you press or , one of the available choices appears in the following  
sequence:  
RGB-PC  
Decoder  
"D-SUB Input" selection screen  
RGB-PC: For using RGB for PC  
Decoder: For using digital broadcast tuner  
(3) Press  
or  
to select Mask.  
(4) Select Decoder by FUNCTION to set up Mask.  
Each time you press or , one of the available choices appears in the following  
sequence:  
This fringe part is masked.  
Off:  
Does not mask.  
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of  
pixels specified.  
(5) Press  
to store.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)  
OTHERS MENU  
• Selecting time before DPMS starts (DPMS)  
You can use this option to select the amount of time before the DPMS function starts.  
DPMS (which stands for “display power management signaling”) allows the display to maintain an  
automatic power saving function.  
This function causes on-screen information to disappear until the next input operation, if the power  
is ON and the display has not received any signals for the predetermined period of time. When  
DPMS is active, the power indicator lamp turns orange.  
(1) Select DPMS and press  
DPMS screen appears.  
.
DPMS selection screen  
(2) Press  
or  
to select Time.  
(3) Each time you press or , one of the available choices appears in the following sequence:  
Off:  
Disables DPMS  
Number: Approximate time before DPMS starts. (Unit: minutes)  
* The power indicator lamp turns orange while the DPMS is ON.  
* The power turns ON automatically when the display receives a signal.  
(4) Can specify background color.  
Press  
Each time you press or , one of the available choices appears in the following sequence:  
Black White  
or  
to select background color.  
Black: Mutes images in Black background.  
White:Mutes images in White background.  
* Switches approx. 20 seconds after the display stops receiving signals.  
(5) Press  
to store.  
• Selecting input terminals (Audio Input)  
You can use this option to select one of the three available terminals to receive sound from input  
equipment.  
(1) Select “Audio Input” and press  
The “Audio Input” selection screen will appear.  
(2) Press or to select input equipment.  
.
(3) Select a desired input terminal.  
Each time you press or , one of the available choices appears in the following sequence:  
“Audio Input” selection screen  
No audio: No sound in the corresponding mode.  
Audio 1-3: Selects Audio 1 through 3 for receiving sound in the corresponding mode.  
* Repeat steps (2) and (3) for each piece of input equipment.  
(4) Press  
to store.  
* Audio Input menu will not be displayed when "No Audio"is selected.  
* Cannot be set with P42VCA10/P42HCA10/P50XCA10.  
E-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Minimizing phosphor burn-in (Screen Orbiter)  
for RGB  
You can use this option to move the screen position to minimize phosphor-induced burn-in.  
Follow the steps below.  
(1) Select Screen Orbiterand press  
The Screen Orbitersetting screen will appear.  
(2) Press or to select Mode/Time.  
.
(3) Select a desired pattern.  
Screen Orbitersetting screen  
Each time you press or , one of the available choices appears in the following sequence:  
Off: Disables Screen Orbiter.  
Time: Moves the pattern approximately every one hour.  
Mode: Moves the pattern when the power is turned ON or when you switch between modes.  
(4) Press  
or  
to select Moving Area.  
(5) Press or to select the range for moving the pattern.  
Each time you press or , one of the available choices appears in the following sequence:  
Min.: Pattern moves in small range. (About 5 pixels)  
Std.: Pattern moves in moderate range. (About 10 pixels)  
Max.: Pattern moves in wide range. (About 15 pixels)  
(6) Press  
to store.  
Using screen protection functions (examples)  
The screen protection functions minimize phosphor burn-in but cannot completely eliminate it.  
When using the display occasionally  
When using the display continuously  
Select a desired amount of time for DPMS.  
When switching between RGB and video input modes only  
occasionally  
(1) Select Timefor Mode/Timewith Screen Orbiter.  
(2) Select a desired range for Moving Areawith Screen Orbiter.  
This causes the screen saver pattern to move in the same range at  
regular intervals.  
Thus, when the display does not receive a signal, it will automatically  
display white or black over the entire screen. When the predetermined  
time elapses, the power will turn OFF.  
When switching between RGB and video input modes  
frequently  
(1) Select Modefor Mode/Timewith Screen Orbiter.  
(2) Select a desired range for Moving Areawith Screen Orbiter.  
When the mode is switched from Video to RGB, the display position  
moves.  
Input mode of priority (Input Priority)  
You can use this option to switch between modes only when a signal is received through the  
selected input mode terminal. You cannot switch the input mode.  
Each time you press or , one of the available choices appears in the following sequence:  
Off:  
Switches between modes normally.  
Other modes: Displays pictures when a signal is received through the selected input mode  
terminal.  
Press  
to store.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)  
Assigning Numbers to Displays (Monitor No.)  
When you use two or more displays, you can use a single remote control to control individual  
displays by assigning a unique number to each of the displays.  
Each time you press or , one of the available numbers appears in the following sequence:  
0: You can normally control displays.  
You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].  
14: Allows you to control a desired display by pressing the corresponding button (one of  
[SHIFT 1] through [SHIFT 4]).  
When you do not press any of the SHIFT buttons, you can control all displays.  
Press  
to store.  
* You can check the Monitor No.on the Information screen. (See P. E-33.)  
Setting RGB Input Signal Compulsorily (Direct Setting)  
You can use this option to switch the setting for RGB input signal.  
Each time you press or , one of the available choices appears in the  
following sequence:  
For RGB mode:  
Auto: The optimum display is obtained automatically for input signals.  
Others: The optimum resolution setting is fixed for each signal.  
Press  
to store.  
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may  
not be automatically distinguished. Switch to the fixed display when the image is not displayed  
properly.  
Specifying RGB Input Signal (Code Setting)  
You can use this option to specify and display the type of RGB input signal by code number.  
Each time you press  
sequence:  
or  
, one of the available choices appears in the following  
Auto  
Manual  
Auto: Automatically displays the input signal to the optimum.  
Manual: Selects RGB code number.  
Press  
to store.  
"Code Setting" setting screen  
* In Auto mode, the optimum resolution may not be set up automatically depending on the type of  
signal.  
Select the type of signal when the image is not displayed properly.  
However, note that when the type of signal is selected directly, the signal of other resolution  
may not be displayed properly.  
Displaying white over entire screen (White Screen)  
You can use this option to display white over the entire screen to minimize phosphor burn-in.  
Each time you press or , one of the available choices appears in the following sequence:  
On  
Off  
Off: Does not display white.  
On: Displays a white screen immediately.  
Press  
to store.  
E-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Exhibition Mode (Exhibition Mode)  
You can use this option to display the enhanced contrast, which is most suitable for the use by  
unspecified persons.  
Each time you press or , one of the available choices appears in the following sequence:  
On  
Off  
On: Sets up Exhibition mode.  
Off: Sets up normal mode.  
Press  
to store.  
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the  
adjustment is changed.  
* The setup will be cancelled when removing the power plug from the receptacle.  
Horizontal/Vertical installation (Installation)  
You can use this option to setup the number of fan rotation and the direction of display text of menu  
or other screen for horizontal and vertical installation.  
Each time you press or , one of the available choices appears in the following sequence:  
-90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the top.  
Normal : Displays text normally.  
+90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the bottom.  
Press  
to store.  
* Be sure to make this setup when changing the direction of installation.  
Displaying System Status (Information)  
Displays system operation status.  
Select Informationand press  
.
The Informationscreen will appear.  
Mode:  
Input mode  
Monitor No.:  
Monitor number  
Freq. Scan Mode: Frequency scanning  
Information screen (Video Input Mode)  
Input Signal:  
Input Sync.:  
Freq.:  
Video mode  
Signal type  
Frequency and polarity (fH, fV)  
RGB code number  
Preset No.:  
Information screen (RGB2 Input Mode)  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)  
You can restore the values of the adjustment/setting made in the MENU to factory settings.  
Press  
.
1
2
The main menu screen will appear.  
Press  
DEFAULT.  
or  
to select FACTORY  
FACTORY DEFAULTselected in the  
main menu screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
AUDIO  
FEATURES  
FACTORY DEFAULT  
The FACTORY DEFAULT Menu screen will  
appear.  
Press  
.
3
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
Displays the message of whether to proceed  
with the initialization.  
Press  
or  
to select the Yes.  
4
5
Displays the message of whether to  
proceed the initialization  
Press  
.
The message of having completed the  
initialization will be displayed after initializing.  
Press  
when you finish.  
Displays the message of having  
completed the initialization  
E-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPTIONS  
Wall-mounting unit  
0° to 15° mounting angle  
P-WB4200  
Hanging unit  
0° to 15° mounting angle  
P-CT4200  
Stand  
P-TT4200  
Speaker  
P-42SP11 (for 42)  
P-50SP01 (for 50)  
(1 set of 2 speakers)  
Speaker Stand  
Videoboard  
P-42ST11 (for 42)  
P-50ST01 (for 50)  
(1 set of 2 speakers stands)  
P-TE1020E  
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.  
* The colors of options do not match the display colors perfectly.  
Warning  
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.  
CAUTION: This display (P42VCA10/P42VCA11/P42VCA12/P42HCA10/P42HCA11/P42HCA12/  
P50XCA10/P50XCA11/P50XCA12) is for use only with Fujitsu General Limiteds option  
(P-WB4200, P-CT4200, P-TT4200).  
Using this display with other option can cause instability resulting in possible injury.  
E-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPTIONS (Continued)  
INSTALLATION  
1. Turn the power supply switch to OFF.  
2. Remove the power plug from outlet.  
3. Remove the plate attached to the bottom rear of the main unit from  
the Video board unit mounting bracket (3 mm screw w/spring X 3).  
4. Insert the Video board unit into the main unit slot using the guides  
on the sides.  
5. Completely insert the Video board until the plate touches the main  
unit box.  
6. Mount the plate using the 3 screws with spring removed earlier.  
7. Affix the enclosed connector label to the marking position on the  
rear cover.  
Connecting the signal input cable  
For details, see “Connecting to External Equipment” in the main  
unit instructions manual.  
CAUTION: Follow the items given below, to prevent accidental injuries and possible electrical shock.  
Turn off the power supply and disconnect the power plug from outlet before installing the Video board unit.  
Do not remove the cabinet when installing the Video board unit.  
Do not remove screws expect for the specified user service screw marked “ ”.  
Do not use screws other than that specified in this manual for the installation of this Video board unit.  
E-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FACTORY SETTINGS  
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value  
of the first input signal.  
To do this, select a desired signal and follow the instructions in Adjusting Screen Position and Sizeon P. E-22E-23 to adjust the  
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be  
displayed in accordance with the settings you most recently selected.  
Main corresponding signals (RGB mode)  
Display (dots x lines)  
640 x 480  
Horizontal frequency (kHz)  
Vertical frequency (Hz)  
59.94  
Signal  
31.47  
37.50  
43.27  
31.47  
37.88  
46.88  
53.67  
48.36  
60.02  
68.68  
63.98  
79.98  
75.00  
106.25  
31.02  
31.72  
47.71  
15.73  
15.63  
VGA  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1024 x 768  
1280 x 1024  
1280 x 1024  
1600 x 1200  
1600 x 1200  
848 x 480  
852 x 480  
1360 x 768  
720 x 485  
720 x 575  
75.00  
85.01  
70.09  
60.32  
75.00  
85.06  
60.00  
75.03  
84.99  
60.02  
75.03  
60.00  
85.00  
60.00  
59.97  
60.01  
59.94  
50.00  
VGA 75 Hz  
VGA 85 Hz  
400 lines  
SVGA 60 Hz  
SVGA 75 Hz  
SVGA 85 Hz  
XGA 60 Hz  
XGA 75 Hz  
XGA 85 Hz  
SXGA 60 Hz  
SXGA 75 Hz  
UXGA 60 Hz  
UXGA 85 Hz  
60 fields  
50 fields  
* With some input signals, Out of rangemay appear even when the horizontal and vertical frequencies are within their permissible ranges. Make  
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.  
In the Video/S-video modes, the display has been factory-set as follows for different input signals:  
Main corresponding signals (Video, S-video mode)  
Horizontal  
Vertical  
Signal  
NTSC  
frequency (kHz)  
frequency (Hz)  
15.73  
15.63  
15.63  
15.63  
15.73  
59.94  
50.00  
50.00  
59.52  
59.94  
PAL  
SECAM  
PAL60  
4.43NTSC  
Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.  
• “Out of rangeappears if the display receives a signal whose characteristic does not fall within the displays permissible range.  
You can check input signals through Informationon the FEATURES Menu screen. (See P. E-33.)  
In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.  
All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.  
E-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATION  
Model  
P42VCA10W/E/A  
42" wide screen:  
P42VCA11W/E/A  
P42VCA12W/E/A  
Screen size  
92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal)  
36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)  
Aspect ratio  
16:9 (wide)  
Weight  
28.5 kg / 62.8 lbs  
Outer dimensions  
103.5 (W) x 64.0 (H) x 8.5 (D) cm  
40.7 (W) x 25.2 (H) x 3.3 (D) inch  
Power supply  
110240 VAC 50/60 Hz  
Current rating  
Number of pixels  
Display modes  
3.01.3 A  
3.11.4 A  
3.01.3 A  
852 (H) x 480 (V)  
Video, S-video input:  
RGB:  
Normal/Wide1/Wide2/Zoom1/Zoom2  
Normal/Wide/Zoom  
Colors  
16.77 million  
Sound output  
2.5 W + 2.5 W (EIAJ), 8  
Speaker  
2-internal  
External equipment terminals  
Video input terminals  
VIDEO1 INPUT (Video input)  
VIDEO2 INPUT (S-video input)  
1 RCA terminal 1 Vp-p/75 Ω  
1 S terminal Y: 1 Vp-p/75 Ω  
C: 0.286 Vp-p/75 Ω  
Applicablesystems–  
NTSC/PAL/SECAM/PAL60/4.43NTSC –  
PC input terminal  
RGB1 input  
RGB2 input  
mD-sub, 3 rows, 15-pin  
Picture signal: 0.7 Vp-p/75 Ω  
Synchronization signal:TTL level  
BNC terminal x 5 R: 0.7 Vp-p/75 Ω  
G: 0.7 Vp-p/75 Ω  
B: 0.7 Vp-p/75 Ω  
H: TTL Level or ANALOG (75 Ω)  
V: TTL Level or ANALOG (75 Ω)  
Sound terminals  
Control terminal  
2 sound input pin jacks (L/R) (3 lines)  
500 mVrms/ at least 22 kΩ  
1 RS-232C connector (D-sub 9-pin)  
External speaker output terminal  
Effective max. output:  
20 W + 20 W (EIAJ), 4 Ω  
Operating conditions  
Accessories  
Temperature: 0 to 40 °C / 32 to 104 °F  
Humidity: 20 to 80 %  
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,  
2 small ferrite cores (P42VCA11)  
Regulation---P42VCA10W/E/A, P42VCA11W/E/A, P42VCA12W/E/A  
UL, CSA Safety: UL6500, C-UL  
EMC: FCC Part 15 Class A, ICES-003 Class A  
CE Safety: EN60065  
EMC: EN55022  
EN61000-3-2  
1998, Class A  
1995  
EN61000-3-3  
EN55024  
1995  
1998  
EN61000-4-2  
EN61000-4-3  
EN61000-4-4  
EN61000-4-5  
EN61000-4-6  
EN61000-4-8  
1995  
1996  
1995  
1995  
1996  
1993  
EN61000-4-11 1994  
AS Safety: IEC60065  
EMC: AS/NZS 3548  
E-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Model  
P42HCA10W/E/A  
42" wide screen:  
P42HCA11W/E/A  
P42HCA12W/E/A  
Screen size  
92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)  
36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)  
Aspect ratio  
16:9 (wide)  
Weight  
28.5 kg / 62.8 lbs  
Outer dimensions  
103.5 (W) x 64.0 (H) x 8.5 (D) cm  
40.7 (W) x 25.2 (H) x 3.3 (D) inch  
Power supply  
110240 VAC 50/60 Hz  
Current rating  
Number of pixels  
Display modes  
4.31.8 A  
4.41.9 A  
4.31.8 A  
1024 (H) x 1024 (V)  
Video, S-video input:  
RGB:  
Normal/Wide1/Wide2/Zoom1/Zoom2  
Normal/Wide/Zoom  
Colors  
16.77 million  
Sound output  
2.5 W + 2.5 W (EIAJ), 8 Ω  
Speaker  
2-internal  
External equipment terminals  
Video input terminals  
VIDEO1 INPUT (Video input)  
VIDEO2 INPUT (S-video input)  
1 RCA terminal 1 Vp-p/75 Ω  
1 S terminal Y: 1 Vp-p/75 Ω  
C: 0.286 Vp-p/75 Ω  
Applicablesystems–  
NTSC/PAL/SECAM/PAL60/4.43NTSC –  
PC input terminal  
RGB1 input  
RGB2 input  
mD-sub, 3 rows, 15-pin  
Picture signal: 0.7 Vp-p/75 Ω  
Synchronization signal:TTL level  
BNC terminal x 5 R: 0.7 Vp-p/75 Ω  
G: 0.7 Vp-p/75 Ω  
B: 0.7 Vp-p/75 Ω  
H: TTL Level or ANALOG (75 Ω)  
V: TTL Level or ANALOG (75 Ω)  
Sound terminals  
Control terminal  
2 sound input pin jacks (L/R) (3 lines)  
500 mVrms/ at least 22 kΩ  
1 RS-232C connector (D-sub 9-pin)  
External speaker output terminal  
Effective max. output:  
20 W + 20 W (EIAJ), 4 Ω  
Operating conditions  
Accessories  
Temperature: 0 to 40 °C / 32 to 104 °F  
Humidity: 20 to 80 %  
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,  
2 small ferrite cores (P42HCA11)  
Regulation---P42HCA10W/E/A, P42HCA11W/E/A, P42HCA12W/E/A  
UL, CSA Safety: UL6500, C-UL  
EMC: FCC Part 15 Class A, ICES-003 Class A  
CE Safety: EN60065  
EMC: EN55022  
EN61000-3-2  
1998, Class A  
1995  
EN61000-3-3  
EN55024  
1995  
1998  
EN61000-4-2  
EN61000-4-3  
EN61000-4-4  
EN61000-4-5  
EN61000-4-6  
EN61000-4-8  
1995  
1996  
1995  
1995  
1996  
1993  
EN61000-4-11 1994  
AS Safety: IEC60065  
EMC: AS/NZS 3548  
E-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATION (Continued)  
Model  
P50XCA10W/E/A/U  
P50XCA11W/E/A/U  
P50XCA12W/E/A/U  
Screen size  
50" wide screen:  
110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal)  
43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal)  
Aspect ratio  
Weight  
16:9 (wide)  
45.0 kg / 99.2 lbs  
Outer dimensions  
121.2 (W) x 72.6 (H) x 9.8 (D) cm  
47.7 (W) x 28.6 (H) x 3.9 (D) inch  
Power supply  
Current rating  
220240 VAC 50/60 Hz (W/E/A)  
120 VAC 50/60 Hz (U)  
2.61.9 A (W/E/A)  
2.72.0 A (W/E/A)  
2.61.9 A (W/E/A)  
4.8 A (U)  
4.9 A (U)  
4.8 A (U)  
Number of pixels  
Display modes  
1366 (H) x 768 (V)  
Video, S-video input:  
RGB:  
Normal/Wide1/Wide2/Zoom1/Zoom2  
Normal/Wide/Zoom  
Colors  
16.77 million  
Sound output  
2.5 W + 2.5 W (EIAJ), 8 Ω  
Speaker  
2-internal  
External equipment terminals  
Video input terminals  
VIDEO1 INPUT (Video input)  
VIDEO2 INPUT (S-video input)  
1 RCA terminal 1 Vp-p/75 Ω  
1 S terminal  
Y:  
C:  
1 Vp-p/75 Ω  
0.286 Vp-p/75 Ω  
Applicable systems  
PC input terminal  
NTSC/PAL/SECAM/PAL60/4.43NTSC  
RGB1 input  
mD-sub, 3 rows, 15-pin  
Picture signal: 0.7 Vp-p/75 Ω  
Synchronization signal:TTL level  
RGB2 input  
BNC terminal x 5 R: 0.7 Vp-p/75 Ω  
G: 0.7 Vp-p/75 Ω  
B: 0.7 Vp-p/75 Ω  
H: TTL Level or ANALOG (75 Ω)  
V: TTL Level or ANALOG (75 Ω)  
Sound terminals  
Control terminal  
2 sound input pin jacks (L/R) (3 lines)  
500 mVrms/at least 22 kΩ  
1 RS-232C connector (D-sub 9-pin)  
External speaker output terminal  
Operating conditions  
Accessories  
Effective max. output:  
12 W + 12 W (EIAJ), 6  
Temperature: 0 to 40 °C / 32 to 104 °F  
Humidity: 20 to 80 %  
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,  
2 small ferrite cores (P50XCA11)  
Regulation---P50XCA10W/E/A/U, P50XCA11W/E/A/U, P50XCA12W/E/A/U  
UL, CSA Safety: UL6500, C-UL  
EMC: FCC Part 15 Class A, ICES-003 Class A  
CE Safety: EN60065  
EMC: EN55022  
EN61000-3-2  
1998, Class A  
1995  
EN61000-3-3  
EN55024  
1995  
1998  
EN61000-4-2  
EN61000-4-3  
EN61000-4-4  
EN61000-4-5  
EN61000-4-6  
EN61000-4-8  
1995  
1996  
1995  
1995  
1996  
1993  
EN61000-4-11 1994  
AS Safety: IEC60065  
EMC: AS/NZS 3548  
Specifications and external appearance may be change for the sake of improvement.  
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.  
E-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEANING AND MAINTENANCE  
Precautions  
Cleaning the Cabinet and Remote Control  
Be sure to remove the power plug from the receptacle before  
Use a soft cloth for cleaning.  
cleaning the display.  
If the cabinet or remote control is heavily stained, soak a soft cloth  
in a mixture of water and detergent and squeeze it dry before  
wiping off the stains. Use a soft, dry cloth for final cleaning.  
Be sure not to clean the display using a cloth dampened with  
volatile solvents, such as benzene or thinner. Such solvents can  
harm the displays cabinet, the filter at the screen front, and the  
remote control. They can also cause paint to come off these  
Cleaning the ventilation grille  
Remove dust from the ventilation grille in the rear of the main unit  
periodically with a vacuum cleaner as the accumulated dust can  
increase the internal temperature of the main unit causing machine  
failure or fire hazard.  
sections.  
Cleaning the Screen  
Clean the screen gently with a soft cloth.  
The screen surface is fragile. Never attempt to clean it with a hard  
material, press on it forcefully, or tap it.  
HANDY TIPS  
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.  
Problem  
Power does not turn ON.  
No pictures are displayed.  
Action  
Check whether the power plug is securely inserted into the receptacle.  
Check cables for disconnection.  
Check whether the power for all input equipment is ON.  
Check for connection to wrong terminals or for wrong input mode.  
Check whether the input mode display is colored pink.Special setup may have been  
made. Return to original setup or initialize the User adjustment value.  
Remote control does not function properly. Check for incorrect battery orientation.  
Check for dead batteries.  
Check for distance from the display.  
Check whether you are pointing the remote control transmitter properly at the displays  
receiver.  
Check for any obstacle between the remote control and the display.  
The display makes a snapping sound.  
The display makes a buzzing sound.  
There are spots on the screen.  
Degraded colors/tints  
This sound is produced when the cabinet expands or contracts due to variations in  
temperature. This sound does not indicate that the display has a problem.  
The display has fans to maintain the temperature of internal components at a constant  
level. This sound is produced by the fan as it rotates.  
Check whether your AV equipment is affected by interference from automobiles, trains,  
high-voltage transmission lines, neon signs or other potential sources of interference.  
Check whether all picture adjustments have been properly made.  
(See Adjusting Pictureson P. E-20E-21.)  
Improper screen position/size  
Check whether screen position and size have been properly adjusted.  
(See Adjusting Screen Position and Sizeon P. E-22E-23.)  
No sound from external speakers  
No sound  
Check cables for disconnection.  
Check whether you have selected No Audiofor the Audio Inputsetting.  
(See Featureson P. E-30.)  
If Invalid operationappears.  
Check whether you have selected Input Priority.(See Featureson P. E-31.)  
If Out of rangeappears, the display is  
receiving a signal whose picture or signal  
cannot be reproduced by the display.  
The screen turns to black and white.  
Input proper signals.  
Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA /  
XGA / UXGA, 75 Hz or less for SXGA.  
If Error message Condition 1appears,  
the fan is defective.  
Remove the power plug from the receptacle, and contact your dealer for repairs.  
If Error message Condition 2appears,  
the displays internal components are  
extremely hot.  
Remove the power plug from the receptacle. (You can turn the power back ON again  
when the components have cooled sufficiently.) If the message appears again when you  
turn the power back on, remove the power plug from the receptacle, and contact your  
dealer for a repairs.  
If "Change refresh rate to 60Hz"appears,  
If the power indicator lamp flashes red.  
The picture may get blurred with vertical frequency of other than 48.3-51.8 or 58.4-61.4  
(Hz). Change the setting of your PC, etc.  
Remove the power plug from the receptacle, and inform your dealer about how the lamp  
flashed.  
As explained below, the power indicator lamp flashes differently depending on the type  
of problem:  
Flashes repeatedly: Improper supply voltage level  
Flashes once: Malfunction by the fan  
Flashes twice: Excessive temperature  
Flashes three times or more: Other problems  
E-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Chipper 1450 Series User Manual
Crown Audio Network Router Network Bridge User Manual
Cuisinart Coffeemaker DGB625BCU User Manual
Cuisinart Mixer HTM 3 HTM 5 User Manual
Dell All in One Printer 968 User Manual
Dixon Lawn Mower 13631 0702 User Manual
Everpure Water System EV9107 21 User Manual
Fortinet Switch 124dpoe User Manual
GE Air Conditioner AEE08 User Manual
GE Air Conditioner AVX08 User Manual