GPSBT560 User Manual
GPS Bluetooth Receiver User Manual
Model：GPSBT560
.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment.
RF exposure warning ·
This equipment must be installed and operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users
and installers must be provide with antenna installation instructions and transmitter operating conditions
for satisfying RF exposure compliance.
CE command：
Bluetooth: ETSI EN 300 328 V1.6.1(2004-11); ETSI EN 301 489-1 V1.6.1(2005-09); ETSI EN 301 489-7
V1.2.1(2002-08)
GPS: ETSI EN 301 489-1 V1.6.1(2005-09); ETSI EN 301 489-19 V1.2.2(2002-11); ETSI EN 300 400-1
V1.3.1(2001-09); ETSI EN 300 440-2 V1.1.2(2004-07)
Safety: EN 60950-1:2006
.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
1. INTRODUCTION.................................................................................................................................5
1.1
1.2
1.3
1.4
1.5
1.6
GLOBAL POSITION SYSTEM (GPS) TECHNOLOGY ................................................................................5
BLUETOOTH TECHNOLOGY ..................................................................................................................5
INTELLIGENT GPS TRACKING AND BLUETOOTH CONNECTING (ITC) MANAGER..................................5
PRODUCT FEATURES ............................................................................................................................6
PACKAGE CONTENTS............................................................................................................................6
OVERVIEW ...........................................................................................................................................7
2. USING YOUR GPSBT560 RECEIVER..............................................................................................8
2.1
2.1.1
2.1.2
2.2
2.3
2.4
2.5
BATTERY CHARGING AND USAGE ........................................................................................................8
Battery Charging .........................................................................................................................8
Battery Information .....................................................................................................................8
CONNECTING AN EXTERNAL ANTENNA.................................................................................................9
PLACING THE RECEIVER .......................................................................................................................9
SWITCHING THE RECEIVER ON AND OFF................................................................................................9
PAIRING AND CONNECTING THE GPS RECEIVER WITH BLUETOOTH DEVICES......................................9
Pairing the receiver with a Bluetooth device...............................................................................9
Connecting/Disconnecting the receiver with a Bluetooth device ..............................................10
2.5.1
2.5.2
3. IMPORTANT MESSAGES AND FREQUENTLY ASKED QUESTIONS...................................11
4. MAINTENANCE ................................................................................................................................12
.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
1. Introduction
Combining both GPS and Bluetooth technologies, Flaircomm’s GPSBT560 receiver allows you to determine your
current geographic location and direction anywhere. It communicates in real-time with Bluetooth-enabled devices
such as PDAs, Smart Phones, Computers, and other devices to provide locations information for navigation
applications. This battery-powered portable device can be easily placed on the car or carried by the user.
1.1 Global Position System (GPS) Technology
The Global Positioning System (GPS) is a worldwide radio-navigation system formed from a constellation of 24
satellites and their ground stations. A GPS receiver is a device that calculates its location based on received satellite
information and could provide its geographic location information with accuracy up to few meters. The accuracy of
the receiver depends on the number of satellites in view and signal strengths received.
1.2 Bluetooth Technology
Bluetooth is an internationally standardized technology supporting short distance wireless communications. Any
two Bluetooth-compatible equipments, such as mobile phone, PDA, PC, headset, mouse, keyboards, printer, etc.
can wirelessly communicate with each other via Bluetooth connection. To ensure worldwide compatibility,
Bluetooth operates on the globally available ISM (Industrial Scientific and Medical) frequency band. Within 2.4
GHz and 2.48 GHz, Bluetooth transmits data up to either 10 meters (CLASS II mode) or 100 meters (CLASS I
mode) using 79 frequency hopping channels.
Though line-of-sight is not required, Bluetooth connections could be subject to interferences from obstructions such
as walls, human bodies, and other electronic devices. In addition, due to variations on product implementation, it is
likely that Bluetooth equipments from different manufactures have interoperability issues. In that case, you may
consult with manufactures to check product compatibility.
Note that, there could be some restrictions imposing on using Bluetooth devices in some countries. Please check
with your local authorities.
1.3 Intelligent GPS Tracking and Bluetooth Connecting (ITC) manager
GPSBT560 is designed with advanced power management scheme, the intelligent GPS Tracking and Bluetooth
Connecting (ITC) manager. The ITC manager automatically wakes up and goes to sleep depending on whether or
not the Bluetooth connection is on. Once a paired Bluetooth device moves in the Bluetooth range and connects to
the receiver, the ITC manager wakes up the GPS unit and commands it to start position tracking. Once a connected
device moves out of the Bluetooth range or is disconnected by the user, the ITC manager shutdowns unused
hardware components and commands the device entering into the sleeping mode. Thus minimizes GPSBT560’s
power consumption and extends working and standby time dramatically.
.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
1.4 Product Features
z
GPS
‹
‹
‹
‹
‹
‹
‹
‹
‹
Compact GPS Bluetooth receiver with completed GPS functionality
Compatible with any GPS navigation software using NMEA-0183 (V3.1) standard format GPS data
16 C/A-code tracking modules with 4 correlators each
Default (None) or Programmable WAAS/EGNOS DGPS Source
Cold/Warm/Hot Start Time: 46/34/5 Seconds
High signal acquisition sensitivity at -145dBm and tracking sensitivity at -150dBm
Superior geo-location accuracy: CEP50 for 1.2 m, CEP95 for 3.0 m
Ultra-low GPS power consumption: Full active mode at 25 mA, sleep mode at 4 uA
Maximum speed: 515 m/s
z
Bluetooth
‹
‹
‹
‹
‹
Bluetooth v 1.2 compliant, interference-tolerable with WLAN devices
Class II, operating range up to 10 meters
Support SPP profile
Data rate up to 723 Kbps
Compatible with most Bluetooth-enabled navigation devices such as cellular phones, PDAs, computers,
etc.
‹
Support up to storing 8 devices pairing information
z
General
‹
‹
Better portability with internal rechargeable Lithium Polymer battery
Low power consumption, up to 16 hours working time (in full operation mode without ITC) and 200
hours standby time.
‹
Intelligent GPS Tracking and Bluetooth Connecting (ITC) manager results in extended working/standby
time dramatically, the actual time extended will depend on how you operate the GPS Bluetooth Receiver.
‹
‹
Robust performance, fast connection, accurate and sensible search of devices in range
Stylish, portable, lightweight, mini-sized, suitable for vehicle and open-sky environment
1.5 Package Contents
z
z
z
z
z
GPSBT560
1
1
1
1
1
Car Mounting Accessory
Car Charger Set (or Traveling Charger, optional)
External antenna (Optional)
User Manual
.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
1.6 Overview
Power Key
USB Connector
External Antenna
Connector
Yellow LED
Blue LED
Red LED
Figure 1 Overview
z
z
Power Key - on/off switch
Red LED - A battery status indicator
„
„
„
„
In charging mode: it is always on
In normal mode: it blinks once per minute
In low battery mode: it gives two quick blinks every minute
In all other modes: it is off
z
z
Blue LED - A Bluetooth status indicator
„
„
„
In pairing mode: it blinks once per second
In connected mode: it blinks once every 4 seconds
In all other modes: it is off
Yellow LED - A GPS status indicator
„
„
In GPS active mode: it blinks once every 4 seconds
In all other modes: it is off
z
z
External Antenna Connector (MMCX/3V)
USB Connector - Connect to the charger
.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
2. Using Your GPSBT560 Receiver
GPSBT560 shall is designed mainly for outdoor applications to allow reception of GPS signals. Since the GPS
antenna is placed under the front cover. For better signal reception, you shall always place the device facing up to
the open sky. You shall also avoid any metal obstacles in the signal reception direction from the sky. Depending
on the environment that you stay, the device could be used in an indoor environment such as at office or home for
with the help of plugging an external antenna into the device. In that case, you must place the antenna outside or
against the window and make it face up to the open sky.
Note that, the accuracy of GPS position is affected by many facts such as poor weather conditions and satellite
signal in general, this device should not be used for precise location measurement. You should never rely solely on
location data from the GPS receiver. In addition, GPS can only determine your direction on the basis of your
movement. If you stand still, GPS cannot detect which way you are facing.
2.1 Battery Charging and Usage
2.1.1 Battery Charging
This receiver contains a rechargeable Li-Polymer battery. First-time charging time is about 4 hours. Later-on
recharging time is around 2-3 hours. Detailed charging procedures as follows:
1. Referring to Figure 2, plug the connector of the charger to the receiver’s charging port.
2. Connect the car charger to the cigarette lighter to start charging. The Red LED will be on during charging.
Once the battery is fully charged, the Red LED will off in power off mode, and in power on mode the Red
LED will change to blink once per minute. You should disconnect the charger from the receiver and the
power outlet.
You can also use the removable USB charging cable to charge the receiver from your PC.
Figure 2 Battery Charging
2.1.2 Battery Information
1. Once the battery is fully charged, the receiver supports continuous working time up to 16 hours and standby
time about 200 hours.
2. When the battery is low, the red LED gives two quick blinks every minute. Once the battery gets too low, the
receiver will shutdown itself. Then all LEDs are off.
Note that, over-charging will reduce the battery life. If a fully charged battery is left unused, it will lose power over
time. Extreme temperature (either too hot or too cold) will also affect its ability to charge, capacity, and lifetime.
.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
2.2 Connecting an external antenna
The receiver provides an external antenna connector. Please refer to Figure 3 for connecting an external antenna.
The external antenna will provide better GPS performance than the internal antenna.
Figure 3 Connecting an External Antenna
2.3 Placing the receiver
There is a magic sticker in our package. The receiver can be placed at any smooth surface as indicated in Figure 4.
Please make sure your GPS Bluetooth Receiver is facing the open sky.
Figure 4 Mounting in the car
Note that, some car windshields and windows may contain metal, which may block or weaken the satellite signals.
2.4 Switching the receiver on and off
Switching on: Push the power key up, and then the Red LED will blink once (or twice while the battery is low).
For about 4 seconds later the Blue LED will blink once per second. This indicates the receiver is power on.
Switching off: Push the power key down, and then all LEDs are off. This indicates the receiver is power off.
2.5 Pairing and Connecting the GPS Receiver with Bluetooth Devices
2.5.1 Pairing the receiver with a Bluetooth device
Before sending GPS data to a Bluetooth device, you must pair the receiver with the Bluetooth device. Paring sets
up a unique relationship between them and allow the receiver to memorize the unique ID (or passkey) of the device.
This ensures that a unique and encrypted wireless link between your receiver and the device will be used.
.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
The receiver can store up to 8 paired Bluetooth devices. Any one of them can be connected the receiver. However,
for any give time, only one device can be connected.
Detailed operation procedures are as follows:
1. Place your receiver close to a Bluetooth device, and ensure that your receiver is power off, and the device is
power on.
2. Switch the receiver on by pushing up the power key, the Red LED blinks once per minute and the Blue LED
blinks once per second. This indicates that the receiver has been successfully turned on and entered the paring
mode.
3. Following your Bluetooth device’s user guide to active Bluetooth device search, on the Bluetooth device side
you will see a list of Bluetooth equipments found at the end of the searching process.
4. Select this GPS Bluetooth receiver ‘GPSBT560’ from the list, and then follow the device’s instructions to
initiate pairing operation from the device side.
5. During the pairing process, the device will be prompted to enter a passkey. Please enter passkey “0000” to
confirm the pairing operation between the receiver and your Bluetooth device. Once the pairing procedure is
completed, GPS receiver will exit the pairing mode and enter the standby mode. The Blue LED will be off.
Note：
1. The receiver will stay in the pairing mode for about 3 minutes. If no device has been paired or cannot be
finished within 3 minutes, the receiver will exit the pairing mode and enter the standby mode. The Blue LED
will be off and you need to go back to above steps to enter the paring process.
2.5.2 Connecting/Disconnecting the receiver with a Bluetooth device
Your receiver will only communicate with a paired Bluetooth device with a Bluetooth connection established in
advance.
Connecting your receiver with a Bluetooth device：
Place the receiver close to the Bluetooth device, follow the device user guide to find the receiver, and then send a
connection request to the receiver. Note that, since there can only be one Bluetooth connection at any time, the
receiver must in the standby mode before establishing a connection to a paired device.
Disconnecting your receiver from a Bluetooth device:
To disconnect the receiver from a Bluetooth device, you can:
1. Power off the receiver
2. Refer to the device’s manual to initiate the disconnection from the device side.
Once disconnected, the receiver will enter the standby mode and the Blue LED goes off.
.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
3. Important Messages and Frequently Asked Questions
1. Red LED gives two quick blinks every minute.
Low battery indicator; please recharge your battery as soon as possible.
2. Can't power up the device after charging more than 20 minutes：
For the first time, the device should be charged at least 40 minute prior tuning on, it is recommended that the
battery should be fully charged before using the device.
3. Receiver can not be found when a device tries to pair with it：
Your receiver may not be in the pairing mode or within the operation range (i.e., 10 meters), please refer section
2.5.1 for details.
4. Do the paired receiver or the paired Bluetooth device need to be re-paired power off：
No.
5. Slow GPS position tracking and poor location accuracy
The GPS signal could be very weak. You need to ensure the receiver is placed with the top side facing up to the sky.
However, this may not necessary lead to better signal strength due to other causes such as weather conditions.
6. Slow cold start time
This is typically happens when you go to a new area and turn the device on or on the first-time use, of the receiver.
In these cases, either the previous recorded geo-location data were too far away from the new location or no initial
geo-location data can be used for cold start reference.
.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSBT560 User Manual
4. Maintenance
GPSBT560 is a well-designed communications device, careful maintenance and proper use will extend the product
life. Following maintenance procedures may be helpful to you:
z
z
Always turn off power and keep your device in a safe place when it is not in use
Keep the device dry, away from water, precipitation, humidity, moisture, and various liquids that may corrode
electronic circuits. If your device gets wet, turn it off immediately and wait until the device gets dry completely
before using it
z
z
z
z
z
z
Keep the device away from dusty and dirty places. Otherwise, the mechanic and electronic parts could be
damaged
Do not store the device in high temperatures or in direct sunlight. Extreme high temperature could degrade
performance, reduce battery lifetime, and wrap or melt the certain plastics.
Do not store the device in too cold place. Moisture could form inside the device when you take it to a warm
place. This could damage the internal electronic circuits.
Avoid dropping, knocking, and shaking the device. The mechanical parts and the internal electronic circuits
could be broken.
Avoid using hash chemicals, cleaning solvents, and any other strong detergent to clean the device. You may
use a clean and slightly damp cloth to clean the device
Always take to device to the nearest authorized service facility for repairing if it is malfunctioning.
Disassembling, modifying, and replacing components yourself could degrade product performance, cause
damages, and terminate warranty
.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|