M5727
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tools required for assembly: Phillips Screwdriver,
Hammer and Scrap Block of Wood (not included).
Age: 2-5 years
Weight limit: 55 lbs (25 kg).
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
PUSH
Straight Axle Assembly
Seat
Frame
3
Bottom View
• Turn the frame upside down.
1
• Insert the straight axle assembly through the holes in the
rear of the frame.
• Fit the seat onto the frame.
• Push firmly near the back end of the seat to "snap" it
into place.
Bushing
Wheel
(Grooved Side Down)
(Flat Side First)
Rear
Wheel
Straight Axle
(Indented
Side Down)
Bushing
Wheel Hub
(Smooth Side First)
(Flat Side Down)
Wheel Hub
(Pointed End First)
4
• Turn the assembly upright.
• Slide a bushing, smooth side first, onto the end of the
straight axle.
Straight
Axle
• Slide a wheel, flat side first, onto the end of the straight axle.
• Slide a wheel hub, pointed end first, onto the end of the
Straight
Axle
straight axle.
Cap Nut
2
• Place one end of the straight axle into the cap nut. Tap
the end of the straight axle with a hammer. Make sure
the cap nut is securely attached to the straight axle.
• Slide a wheel hub, flat side down, onto the straight axle.
• Slide a rear wheel, indented side down, onto the
straight axle.
• Slide a bushing, grooved side down, onto the straight axle.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Pedal Hub
Pedal Axle Tab
Pedal Hub
7
• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fit into the slot in each pedal hub.
• While holding the pedal hubs on the pedal axle, insert the
pedal axle into the hole in the center of the front wheel.
• Press the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
5
• Repeat this procedure on the other side with the other
two pedal hubs.
• Fit the cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear
wheel to be sure the cap nut is securely attached to
the straight axle.
Fork Arms
Hint: You may need the help of another adult to hold the
other end of the straight axle in place.
Front Wheel
Assembly
Groove
Fork Cover
Pedal Axle
8
Wheel Hub
• Place the front wheel assembly between the fork arms.
Make sure the pedal axle fits into the groove at the bottom
of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x ¾" screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the
other fork arm.
Wheel Cap
6
• Fit the tabs on the wheel cap into the slots in the wheel
hub. Push to "snap" the wheel cap in place.
• Repeat this procedure to attach the other wheel cap to
the other wheel hub.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Fork Post
Handlebar Front
Fork Post
Handlebar Back
¾" Screw
¾" Screw
2¼" Screw
Fork Cover
9
• Insert the fork post up through the hole in the neck of the
frame. Make sure the fork is positioned so that the fork
covers face the rear wheels.
10
• Fit the handlebar front to the fork post.
Hint: The handlebar front is designed to assemble to the
fork post one way.
• Fit the handlebar back to the fork post and handlebar
front. Hold them together firmly.
• First, insert the remaining #8 x ¾" screws through the
outer holes in the handlebar back and tighten.
• Then, insert the #8 x 2¼" screw through the center hole
in the handlebar back and tighten.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Decoration
Consumer Information
• Periodically, check the plastic parts and if broken or
cracked, dispose of them properly.
• Periodically, check all fasteners regularly to be sure they
are tight. If the fasteners are not tight, tighten them
as necessary.
4
• To clean, use a mild soap and water solution and a clean
cloth. Rinse clean with water to remove soap residue.
IMPORTANT! It is a good practice to start training children
very young regarding the importance of helmet use. When
children are older and riding bicycles and faster vehicles,
it is important that they use a helmet each and every time
they ride. For this reason, even while riding a tricycle, it is
a good idea to familiarize your child with helmet use,
so that it becomes a habit for life. Choose a helmet that
complies with requirements of the applicable certifying
agency for bicycle helmets.
5
7
2
8
Right Side
10
9
6
™
11
3
1
Left Side
Proper label application will help to keep the labels
looking their best!
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry
cloth to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying a label, rub the label firmly with a cloth to
make sure the label is adhered to your vehicle.
Assembly is complete.
BARBIE and associated trademarks and trade dress are owned by and used under license from Mattel, Inc.
©2008 Mattel, Inc. All Rights Reserved.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO
M5727a-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
|