Fisher Price Musical Toy Instrument 79029 User Manual

Step & Play Piano  
Product features may vary from picture above.  
Model Number: 79029  
Please read these instructions before assembly and use of this product.  
Keep this instruction sheet for future reference, as it contains important information.  
With seat in place, for use by children who have the neck control to hold their head upright.  
To prevent falls, never use with an active child who may be able to climb out of the seat.  
Adult assembly is required.  
This product requires three “C” (LR14) alkaline batteries (not included).  
Tool needed for battery installation: Phillips Screwdriver (not included).  
e
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts  
Seat Base  
4 Rollers  
Seat Ring  
Pad  
1
1
1
3
4
3
4
3
4
Upper Rail  
Leg with  
Detail  
2 Legs with  
Detail  
Upper Rail with Leg  
2
2
2
Mirror  
Tray  
Bell  
4
4
4
4
4
4
1
1
1
1
1
1
3
3
3
3
3
3
Trumpet  
Maraca  
2
2
2
2
2
2
Tambourine  
Base  
Note: The legs and base sockets have been coded with tape. Do not remove the tape  
until you have completed assembly of this product.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp  
edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.  
Never substitute parts.  
PUSH  
Upper Rail  
with Leg  
Leg  
1
1
1
PUSH  
4
4
4
4
4
4
Tape  
1
1
1
1
1
1
4
4
4
3
3
3
3
3
3
1
2
2
1
2
1
2
2
2
2
2
2
3
3
3
3
3
3
Base Socket  
1
2
2
2
2
2
2
2
Tape  
3
Base Socket  
• Locate the leg with tape on it.  
• Locate the matching tape covering the socket in the base.  
• Align the tab on the leg with the slot in the base socket.  
• Insert and “snap” the leg into the base socket.  
2
• Position the upper rail with leg so that the leg with  
over the base socket with matching tape.  
tape is  
2
• Insert and “snap” the leg with  
tape into the socket with  
matching tape.  
• Now, firmly push the upper rail above the leg with tape on  
it. Make sure you hear a “snap.  
2
• Firmly push the upper rail above the leg with  
Make sure you hear a “snap”.  
tape on it.  
Upper Rail with Leg  
• Pull up on the upper rail to be sure it is secure.  
2
Tape  
2
2
2
4
4
4
Tape  
4
Wire Connector  
Cardboard  
Base Socket  
3
Tape  
3
3
3
2
4
4
4
4
4
4
1
1
1
2
3
3
3
3
3
3
• Locate the upper rail with leg and  
tape on it.  
• Remove the cardboard attached to the wire connector. Throw  
the cardboard away.  
2
2
2
• Pull the wire connector out from the hole in the bottom of  
the leg.  
4
Base Socket  
4
3
• Locate the legs with  
tape on them.  
• Locate the matching tape covering the sockets in the base.  
• Align the tabs on the legs with the slots in the base sockets.  
• Insert and “snap” the legs into the base sockets.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
PUSH  
Bell  
Upper  
Rail  
Slot  
PUSH  
Upper Rail  
PUSH  
4
4
4
1
1
1
3
3
3
7
2
2
2
5
• At an angle, fit the single tab on the bell into the slot in the  
upper rail.  
• Now, push and “snap” the other two tabs on the bell into the  
slots in the upper rail.  
• Fit the upper rail onto the legs, as shown.  
• Push down firmly above each leg until, you hear the upper rail  
“snap” into place on each end.  
• Pull up on the upper rail to be sure it is secure.  
Note: Remove the tape on the legs and around the base  
sockets. Throw the tape away.  
Mirror  
Trumpet  
“T” End  
Upper  
Rail Slot  
Slots  
6
8
• Fit the “T” end of the strap on the trumpet through the slot in  
the upper rail. Pull the trumpet to be sure it is secure in the  
upper rail.  
• Position the mirror so that it is toward the inside of the product.  
• Insert and “snap” the tabs on each end of the mirror into the  
Hint: You may want to use the end of a slotted screwdriver to push  
matching slots in the upper rail.  
the “T” end of the strap through the slot.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Roller  
Tray  
Roller  
Clip  
11  
Seat Base  
Clip  
• Turn the seat base upside down on a flat surface.  
• Insert and “snap” a roller into each clip on the edge of the seat  
base, as shown.  
• Repeat this procedure to assemble the remaining two rollers to  
the other side of the seat base.  
9
Track  
• Fit the tray underneath the mirror, into the upper rail,  
as shown.  
Seat  
Lock  
Button  
Maraca  
Tambourine  
Seat Base  
Groove  
12  
10  
• Locate the seat lock buttons on the underside of each  
upper rail.  
• Fit the groove on each side of the seat base onto the tracks on  
the upper rails.  
• Insert and “snap” the ends of the maraca and tambourine into  
the holes in each end of the upper rail with keyboard.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Seat Ring  
PUSH  
13  
Pad  
• While pushing a seat lock button on one of the upper rails,  
slide the seat base over it.  
• Now, push the seat lock button on the other upper rail and  
slide the seat base over it.  
• Push the seat base so that it is positioned in the center of the  
product. You should hear a “snap” on each side.  
Seat Ring  
Seat Ring  
Ribbed Side  
Pad  
15  
Red Slot  
Red Slot  
Marking  
• Pull the pad through the seat ring and wrap the pad  
around the outside of the seat ring.  
14  
Pegs  
• Position the seat ring so that the  
inside (ribbed side) is up and the  
star marking is toward you.  
• Fit the red slots on the pad to the  
seat ring pegs on either side of the  
star marking, as shown.  
Marking  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Peg 3  
Roller  
Peg 4  
Roller  
Peg 5  
Peg 2  
Peg 1  
Peg 6  
Roller  
Roller  
16  
• Fit the other six slots on the seat pad to the corresponding  
pegs on the seat ring.  
Connectors  
• Tuck the seat pad behind all four rollers.  
18  
Seat with  
Pad  
Hole  
in Seat Base  
• Tip the end of the product up and locate the wire connectors.  
• Fit the connectors together. If they will not go together easily,  
do not force them together. Turn one or the other connectors  
over, and try again!  
One-time assembly is now complete.  
17  
• Insert and “snap” the seat with pad into the hole in the  
seat base.  
• Pull up on the seat to be sure it is secure.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery Installation  
Battery Safety Information  
Hint: We recommend the use of alkaline batteries for  
longer battery life.  
Battery  
Compartment  
Door  
1.5V x 3  
“C” (LR14)  
SHOWN ACTUAL SIZE  
Batteries may leak fluids that can cause a chemical burn  
injury or ruin your product. To avoid battery leakage:  
• Do not mix old and new batteries or batteries of different  
types: alkaline, standard (carbon-zinc) or rechargeable  
(nickel-cadmium).  
• Remove batteries during long periods of non-use. Always  
remove exhausted batteries from the product. Dispose of bat-  
teries safely. Do not dispose of batteries in a fire.  
The batteries may explode or leak.  
• Never short-circuit the battery terminals.  
• Use only batteries of the same or equivalent type,  
as recommended.  
Installation  
• Locate the battery compartment door under the upper rail  
with keyboard.  
• Loosen the screw in the battery compartment door with a  
Phillips screwdriver. Remove the battery compartment door.  
• Insert three “C” (LR14) alkaline batteries, as indicated inside  
the battery compartment.  
• Replace the battery compartment door and tighten the screw  
with a Phillips screwdriver. Do not over-tighten.  
• Do not charge non-rechargeable batteries.  
• Remove rechargeable batteries from the product  
before charging.  
• If removable, rechargeable batteries are used, they are only to  
be charged under adult supervision.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set-Up & Use  
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges.  
DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never  
substitute parts.  
WARNING  
To prevent serious injury or death:  
• When seat is in place, use only for a child who is able to hold head upright  
unassisted and who is not able to walk.  
• Never leave child unattended. Always keep child in view while in product.  
• Never use near steps or pools, hot surfaces or areas that may be hazardous to a  
child. Product may move during use.  
To avoid tip over, place product on a flat, level surface.  
Upper  
Position  
Buckles  
PUSH  
PUSH  
Lower  
Position  
Seat Height Adjustment  
Remove Seat  
• Place baby in the seat. Check the distance between your  
baby’s feet and the keyboard base.  
• When baby outgrows using the seat, you can remove it from  
the upper rails.  
• Remove baby from the seat.  
• Join the buckles to shorten (upper position) or lengthen  
(lower position) the seat pad.  
• Push the seat lock buttons under each upper rail (you will  
have to do this one at a time), and slide the seat base off of  
the upper rails.  
• Store the seat in a safe location for future use.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set-Up & Use  
Dial  
Upper  
Keyboard  
Drum  
Stage 1  
Spinning seat with 12 musical activities.  
Power and Mode  
Switches  
Stage 2  
Lower  
Keyboard  
Sliding seat lets babywalkback and  
forth, with music and lights.  
• Slide the power switch to on with low volume ; or on with high volume  
• Slide the power switch to O to turn power off power.  
• Slide the mode switch to:  
.
Listen to an entire song when baby taps the lower keyboard.  
Listen to a portion of a tune each time baby taps the lower keyboard.  
Listen to a single note each time baby taps the lower keyboard.  
Listen to sound effects when baby turns the dial or taps the drum.  
Hint: When sounds or lights become faint, or do not work at all, it’s time for an adult  
to replace the batteries!  
Stage 3  
Seat removes so toddler can play and  
even create songs note by note.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(United States Only)  
Care  
FCC Note  
Note:This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to  
The pad is machine washable. Wash the pad separately in cold  
water on the gentle cycle. Do not use bleach. Tumble dry  
separately on low heat and remove promptly. The frame, seat  
base, seat ring and toys may be wiped clean using a mild clean-  
ing solution and a damp cloth. Do not immerse the frame.  
Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interfer-  
ence to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or televi-  
sion reception, which can be determined by turning the equip-  
ment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment  
and receiver.  
• Consult the dealer or an experienced radio/TV technician  
for help.  
Note: Changes or modifications not expressly approved by the  
manufacturer responsible for compliance could void the user‘s  
authority to operate the equipment.  
PUSH  
PUSH  
Remove Seat and Pad  
• Push the seat lock but-  
tons under each upper rail  
(you will have to do this  
one at a time), and slide  
the seat base off of the upper rails.  
• Turn the seat base over so the the bottom faces you.  
• While pressing near any notch on the seat ring, pull the seat  
ring from the seat base.  
• Remove the pad from the seat ring.  
Replace the Seat Base, Seat and Pad  
• Please follow the Assembly instructions on pages 6, 7 and 8,  
steps 12 through 17.  
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.  
©2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.  
Printed in Mexico  
79029b-0920  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Compaq Mouse Keyboard Monitor Mouse Switch Box User Manual
Continental Electric Juicer CP42330 User Manual
Creative Labs Car Speaker T6100 User Manual
Creda Cooktop S830G User Manual
Danby Range DR3099BLGLP User Manual
Dimplex Indoor Fireplace DFI23TRIMX User Manual
Dukane Projector 8948 User Manual
Extron electronic Stereo Receiver VNS 104 User Manual
Frigidaire Cooktop 318200612 User Manual
Garland Convection Oven MCO GS GD 10 MU User Manual