Fisher Price Model Vehicle B1480 User Manual

B1480  
Instructions  
Product features and decoration may vary from the photograph above.  
Please keep this instruction sheet for future reference, as it contains important information.  
Adult assembly is required.  
Requires three “AA” batteries (included).  
Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).  
If you have any questions about this product, or are missing a part, please call us toll-free at 1-800-432-5437,  
rather than return this product to the store. We are available between 8 AM - 6 PM EST Monday through Friday.  
Hearing-impaired consumers using TTY/TTD equipment, please call 1-800-382-7470.  
Or write to: Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora, N.Y. 14052.  
Age: 2-6 years.  
Weight limit: 60 lbs (27 kg).  
Action Sounds Trike  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Cap Nut  
Rear Wheel  
(Indented Side Up)  
Hubcap  
(Peg Side  
Down)  
Straight  
Axle  
Straight Axle  
Cover  
Cap Nut  
Rear Wheel  
(Indented Side  
Down)  
Cap Nut  
Assembly  
Tool  
Hubcap  
Hubcap  
(Peg Side  
Up)  
Scrap Block  
of Wood  
Scrap  
Block of  
Wood  
Straight Axle  
Cap Nut  
Assembly Tool  
1
3
Bottom View  
• Fit a cap nut into the cap nut assembly tool. Place one  
end of the straight axle into the cap nut.  
Tap the end of the straight axle with a hammer.  
Make sure the cap nut is securely attached to the  
straight axle.  
Turn the frame on its side with the exposed end of the  
straight axle up.  
• Place the cap nut assembly tool under the assembled  
rear wheel and onto the cap nut.  
• Slide a rear wheel (indented side up) onto the end of  
the straight axle.  
• Slide a hubcap (peg side down) onto the straight axle.  
• Slide a hubcap (peg side up) onto the straight axle.  
• Slide a rear wheel (indented side down) onto the  
straight axle.  
• Place a cap nut on the end of the straight axle. Tap the  
cap nut with a hammer. Gently pull the rear wheel up  
to be sure the cap nut is securely attached to the  
straight axle.  
• Insert one of the tabs on a cover into a slot in the hub-  
cap. Push to snap the cover into place. Repeat this  
procedure to attach the other cover to the other hubcap.  
Frame  
Hole  
Hole  
Pedal Axle  
Tab  
Pedal  
Hub Slot  
Straight Axle  
2
4
Bottom View  
Turn the frame upside-down.  
• Insert the straight axle through the holes in the rear of  
the frame.  
• Fit two pedal hubs onto the pedal axle tabs. Make sure  
the tabs fit into the slot in each pedal hub.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Front  
Wheel  
Pedal Hubs  
Pedal Axle  
Pedal  
Hole  
Pedal Axle  
5
• While holding the pedal hubs on  
the pedal axle, insert the pedal  
axle through the hole in the center of the front wheel.  
• Push the pedal hubs into the center of the front wheel  
until they are flush with the surface of the front wheel.  
Scrap Block  
of Wood  
7
Pedal Hub  
• Fit a pedal on the pedal axle. Tap the pedal with a  
hammer until it is secure.  
• Pull the pedal up to be sure it is secure. If you can  
remove it, you have not secured it properly. Tap it  
with the hammer again.  
• Repeat this procedure to attach the other pedal to the  
other end of the pedal axle.  
Pedal Hub  
6
Fork  
Arms  
Fork Cover  
Turn the front wheel assembly over.  
• Insert the remaining pedal hubs on  
top of and below the pedal axle and into the hole in the  
center of the front wheel.  
• Push the pedal hubs into the center of the front wheel  
until they are flush with the surface of the front wheel.  
Groove  
Pedal  
Axle  
8
• Place the front wheel assembly between the fork arms.  
Make sure the pedal axle fits into the groove at the  
bottom of each fork arm.  
• Place a fork cover over the pedal axle on one fork arm.  
3
"
• Insert two #8 x /4 screws into the fork cover and tighten.  
• Repeat this procedure to attach the other fork cover to  
the other fork arm.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
FIRST, insert the screw  
Slot  
/
so that 3 4" is visible.  
THEN, tighten the screw.  
Headlight Cover  
3
/
Handlebar  
"
4
Frame  
Neck  
Fork  
Post  
Fork  
Cover  
Rear of Trike  
11  
9
• Fit the tab on the headlight cover to the slot in the top  
of the handlebar.  
3
4
• Insert two #8 x / " screws into the headlight cover.  
Tighten the screws. Do not over-tighten.  
• Insert the fork post up through the hole in the neck of  
the frame. Make sure the fork is positioned so that  
the fork covers face the rear wheels.  
• Place the handlebar onto the fork post and push it  
down onto the frame. Make sure the handlebar is posi-  
tioned so that the screw hole faces the rear wheels  
and aligns with the screw hole in the fork post.  
Seat Retainer  
Seat  
• Insert the #8 x 3" screw through the hole in the  
handlebar and into the fork post so that part of the  
screw (about 3/4") is still visible. Tighten the screw.  
Peg  
Cap  
Holes  
12  
Turn the seat upside-down.  
• Fit the small pegs on the seat retainer into the holes in  
the seat.  
10  
• Insert and “snap” the cap into the hole in the frame.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Label Decoration  
Attaching the Seat  
Hint:The seat can be attached to the frame in  
any of three positions, depending on the size of  
your child. Check your child’s fit on the trike by  
observing the seat to pedal distance, as it is  
being ridden. If the pedals seem too far away  
or too close for your child, move the seat up  
or down.  
(Place label 1 on  
opposite side)  
2
11  
(Place label 3 on  
opposite side)  
4
(Place label 7 on  
opposite side)  
Seat  
Tabs  
8
Seat  
Retainer  
13  
Slots  
6
(Place label 14  
on opposite side  
of seat)  
(Place label 5 on  
opposite side)  
15  
(Place remaining  
label 15’s on  
opposite side of  
front wheel)  
Side View  
10  
Upper Position  
Middle Position  
Lower Position  
• At an angle, insert the tabs on the seat into any of  
the top three sets of slots for the lower, middle or  
upper position.  
• Lower the seat so that the seat retainer inserts and  
snaps into the slots in the frame.  
9
12  
Dash View  
• Pull up on the seat to be sure it is secure.  
Proper label application will help to keep the labels  
looking their best!  
• Wash your hands before applying the labels.  
• Make sure the areas where the labels will be applied  
are clean and dry. Wipe your vehicle with a clean, soft,  
dry cloth to remove any dust or oils.  
• For best results, avoid applying a label more  
than once.  
• Apply the labels as shown in the illustration above.  
• After applying a label, rub the label firmly with a cloth  
to make sure the label is adhered to your vehicle.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery Installation  
Battery Safety Information  
For best performance, we recommend replacing the  
batteries that came with this trike, with three, new,  
alkaline “AA” (LR6) batteries.  
In exceptional circumstances, batteries may leak fluids  
that can cause a chemical burn injury or ruin your prod-  
uct. To avoid battery leakage:  
• Do not mix old and new batteries or batteries of  
different types: alkaline, standard (carbon-zinc) or  
rechargeable (nickel-cadmium).  
Headlight Cover  
• Insert batteries as indicated inside the battery  
compartment.  
• Remove batteries during long periods of non-use.  
Always remove exhausted batteries from the toy  
(product). Dispose of batteries safely. Do not dispose of  
batteries in a fire. The batteries may explode or leak.  
• Never short-circuit the battery terminals.  
• Use only batteries of the same or equivalent type,  
as recommended.  
• Do not charge non-rechargeable batteries.  
• Remove rechargeable batteries from the product  
before charging.  
• If removable, rechargeable batteries are used, they are  
only to be charged under adult supervision.  
1
• Loosen and remove the two screws from the headlight  
cover. Remove the headlight cover.  
Care  
• Check the plastic parts regularly and if broken or  
cracked, dispose of them properly.  
Battery  
Compartment  
• Check all fasteners regularly to be sure they are tight.  
If the fasteners are not tight, tighten them as necessary.  
To clean, use a mild soap and water solution and a clean  
cloth. Rinse clean with water to remove soap residue.  
FCC Statement (United States Only)  
2
This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to part 15  
of the FCC rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
1.5V x 3  
“AA” (LR6)  
SHOWN ACTUAL SIZE  
Hint: When sound or lights become faint or stop,  
it’s time for an adult to replace the batteries.  
We recommend the use of alkaline batteries for  
longer battery life.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and  
receiver.  
- Consult the dealer or an experienced radio/TV  
technician for help.  
NOTE: Changes or modifications not expressly approved  
by the manufacturer responsible for compliance could  
void the user's authority to operate the equipment.  
• Loosen the screw in the battery compartment door.  
Open the battery compartment door.  
• Insert three “AA” (LR6) alkaline batteries.  
• Close the battery compartment door and tighten  
the screw.  
• Replace the headlight cover. Replace the screws  
and tighten.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Removing the Seat  
Let’s Go!  
WARNING  
• Adult supervision is required.  
• Never use near steps, sloped driveways,  
hills, roadways, alleys, swimming pool  
areas or other bodies of water.  
Seat Retainer Tab  
• Always wear shoes or sneakers.  
• Never allow more than one rider.  
Right Turn  
Left Turn  
Motorcycle  
Sounds  
Signal  
Signal  
Power  
Frame  
Seat Retainer Tab  
Music  
Horn  
Music  
Horn  
Seat  
Fun Places  
to Go!  
Weather  
Report  
Ignition  
• Slide the power switch on  
.
Turn the ignition, “VRROOOM!”  
• Press the left or right turn signals for flashing blinkers.  
• Press any of the buttons for motorcycle sounds, a  
horn, music, a weather report and fun places to go!  
Turn the frame on its side.  
• Squeeze the seat retainer tabs toward one another  
and lift the seat from the frame.  
IMPORTANT! It is good practice to start training children  
very young regarding the importance of helmet use.  
When children are older and riding bicycles and faster  
vehicles, it is important that they use a helmet each and  
every time they ride. For this reason, even while riding a  
tricycle, it is a good idea to familiarize your child with  
helmet use, so that it becomes a habit for life. Choose a  
helmet that complies with requirements of the applicable  
certifying agency for bicycle helmets.  
For other countries outside the United States:  
GREAT BRITAIN: Mattel UK Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.  
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.  
Consumer Advisory Service 1300 135 312.  
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.  
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.  
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.  
©2005 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.  
PRINTED IN MEXICO  
B1480a-0920  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Yard Vacuum 24777763 User Manual
Cub Cadet Pressure Washer 2200H User Manual
Desa Water Heater 30 User Manual
Desa Water Heater A C B User Manual
Dimplex Stove EN55014 User Manual
Elation Professional All in One Printer XM485 V10 NR User Manual
Electro Voice Stereo Amplifier CPS211 User Manual
Ernemann Projector E15 Series User Manual
Fender Cooktop CS 18 User Manual
Gladiator Garageworks Freezer 2253210A User Manual