X6020
Product features and decorations may vary from the photograph.
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required. Tools required for assembly:
Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
Requires three "AA" batteries (included).
Batteries included are for demonstration purposes only.
Age: 2-6 years.
Weight limit: 60 lbs (27 kg).
IMPORTANT! It is good practice to start training children very young regarding the importance of helmet use.
When children are older and riding bicycles and faster vehicles, it is important that they use a helmet each and every time they
ride. For this reason, even while riding a tricycle, it is a good idea to familiarize your child with helmet use, so that it becomes
a habit for life. Choose a helmet that complies with requirements of the applicable certifying agency for bicycle helmets.
fisher-price.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
CAUTION
Hubcap
(Peg Side Down)
Cap Nut
This package contains small parts.
For adult assembly only.
Rear Wheel
(Indented Side Up)
Cover
Straight Axle
Frame
Hubcap
Cap Nut
Assembly Tool
Assembled
Rear Wheel
Rear Wheel
(Indented Side Down)
Scrap Block
of Wood
3
Hubcap
(Peg Side Up)
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the cap nut assembly tool under the assembled rear
wheel and onto the cap nut.
Straight Axle
1
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Slide a hubcap (peg side up) onto the straight axle.
• Place a cap nut on the end of the straight axle. Tap the
cap nut with a hammer. Gently pull the rear wheel up
to be sure the cap nut is securely attached to the
straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Frame
• Insert one of the tabs on a cover into a slot in the hubcap.
Push to snap the cover into place. Repeat this procedure to
attach the other cover to the other hubcap.
Pedal Hub
Pedal Axle
Hole
Hole
Tabs
Slot
Pedal Hub
4
Straight Axle
2
BOTTOM VIEW
• Fit two pedal hubs onto the pedal axle tabs. Make sure the
tabs fit into the slot in each pedal hub.
• Turn the frame upside down.
• Insert the straight axle through the holes in the rear of
the frame.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Pedal Hubs
Pedal Axle
Assembly
Front Wheel
Pedal
Pedal Axle
5
• While holding the pedal hubs on the pedal axle assembly,
insert the pedal axle through the hole in the center of the
front wheel.
• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
Scrap Block
of Wood
7
• Fit the pedal on the pedal axle. Tap the pedal with
a hammer until it is secure.
Pedal Hub
• Pull the pedal up to be sure it is secure. If you can remove
it, you have not secured it properly. Tap it with the
hammer again.
Fork Arms
Fork Cover
Pedal Hub
Groove
6
• Turn the front wheel assembly over.
• Insert the remaining pedal hubs on top of and below the
pedal axle and into the hole in the center of the front wheel.
• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
Pedal Axle
8
• Place the front wheel assembly between the fork arms.
Make sure the pedal axle fits into the groove at the bottom
of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x 3/4" (1,9 cm) screws into the fork cover
and tighten.
• Repeat this procedure to attach the other fork cover to the
other fork arm.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Headlight
Cover
Handlebar
Frame
Neck
Fork
Post
Fork Cover
11
• Fit the the headlight cover onto the front of the handlebar.
• Insert three #6 x 1/2" (1,3 cm) screws into the headlight
cover. Tighten the screws.
Rear of Trike
9
Seat Retainer
• Insert the fork post up through the hole in the neck of the
frame. Make sure the fork is positioned so that the fork
covers face the rear wheels.
Seat
• Place the handlebar onto the fork post and push it down
onto the frame. Make sure the handlebar is positioned so
that the screw hole faces the rear wheels and aligns with
the screw hole in the fork post.
Peg
Hint: You may need to rotate the handlebar to align the holes.
• Insert the #8 x 3" (7,6 cm) screw through the hole in the
handlebar and into the fork post so that part of the screw
(about 3/4" - 1,9 cm) is still visible. Tighten the screw.
12
• Position the seat upside down.
• Fit the small pegs on the seat retainer into the holes in
the seat.
Cap
10
• Insert and “snap” the cap into the hole in the frame.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Decoration
Attaching the Seat
Hint: The seat can be attached to the frame in any of three
positions, depending on the size of your child. Check your
child’s fit on the trike by observing the seat to pedal distance,
as it is being ridden. If the pedals seem too far away or too
close for your child, move the seat up or down.
12
14
13
10
(Label 8
opposite side)
Tabs
3
7
2
17
Seat
Retainer
(Label 18
opposite side)
TM
16
11
1
(Label 15
Slots
(Label 11
opposite side)
opposite side)
4
1
(Label 5
opposite side)
(Label 1's
both sides)
SIDE VIEW
Middle Position
Lower Position
Upper Position
• At an angle, insert the tabs on the seat into any of the top
three sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps
into the slots in the frame.
• Pull up on the seat to be sure it is secure.
9
6
DASH VIEW
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry
cloth to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying the label, rub the label firmly with a cloth to
make sure the label is adhered to your vehicle.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Replacement
Battery Safety Information
Note: For best performance, we recommend replacing the
batteries that came with this trike with three, new "AA" (LR6)
alkaline batteries.
In exceptional circumstances, batteries may leak fluids that can
cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
Headlight Cover
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they are
only to be charged under adult supervision.
FCC Statement
1
(United States Only)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Loosen and remove the screws from the headlight cover.
Remove the headlight cover.
1,5V x 3
“AA” (LR6)
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
Note: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
2
• Loosen the screw in the battery compartment door. Open
the battery compartment door.
• Insert three "AA" (LR6) alkaline batteries.
• Close the battery compartment door and tighten the screw.
• Replace the headlight cover. Replace the screws
and tighten.
• When sound or lights become faint or stop, it's time for an
adult to replace the batteries. We recommend the use of
alkaline batteries for longer battery life.
• If this product begins to operate erratically, you may need
to reset the electronics. Slide the power switch off and then
back on.
• Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Seat
Consumer Information
Seat
TA
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Seat Retainer Tab
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.
Seat Retainer Tab
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
• Turn the frame on its side.
• Squeeze the seat retainer tabs toward one another and lift
the seat from the frame.
Care
• Check the plastic parts regularly and if broken or cracked,
dispose of them properly.
• Check all fasteners regularly to be sure they are tight.
If the fasteners are not tight, tighten them as necessary.
Let's Go!
• To clean, use a mild soap and water solution and a clean
cloth. Rinse clean with water to remove soap residue.
Horn
Sounds
Turn Signal
Turn Signal
Sounds
ICES-003
• This Class B digital apparatus complies with Canadian
ICES-003. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NMB-003
• Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada. L’utilisation de ce dispositif est
autorisée seulement aux conditions suivantes : (1) il ne doit
pas produire de brouillage et (2) l’utilisateur du dispositif
doit être prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif.
Ignition
Power Switch
• Slide the power switch ON
• Turn the ignition, “VRROOOM!”
• Press the left or right turn signals for flashing blinkers.
.
• Press any of the sound buttons for music, a horn or other
fun phrases!
• When you are finished playing with this toy, slide the power
switch OFF
.
BARBIE and associated trademarks and trade dress are owned by Mattel, Inc.
©2012 Mattel. All Rights Reserved. ® and ™ designate U.S.
trademarks of Mattel, except as noted.
PRINTED IN MEXICO
X6020pr-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
|