Fisher Price Baby Accessories K3799 User Manual

K3799  
Please keep this instruction sheet for future reference,  
as it contains important information.  
Requires three "D" (LR20) alkaline batteries for the mobile and  
two "AA" (LR6) alkaline batteries for the remote (batteries not included).  
Adult assembly required.  
Tool required for assembly: Phillips screwdriver (not included).  
fisher-price.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts  
Base  
3 Soft Toys  
Mobile Hub  
Remote  
Crib Adaptor  
Clamp  
Arm  
3 Leaves  
Note: All of the screws used to assemble this toy are attached to the product.  
Follow these instructions carefully to fully secure the screws.  
Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Battery Installation  
Hint: We recommend using alkaline batteries for longer battery life.  
1,5V x 3  
“D” (LR20)  
1,5V x 2  
AA(LR6)  
Mobile Base  
Remote  
• Loosen the screws in mobile base battery compartment door and remove  
the door.  
Hint: If the crib adaptor is attached to the base, loosen the screws in the crib  
adaptor and remove first.  
• Insert three "D" (LR20) alkaline batteries.  
• Loosen the screw in the remote battery compartment door and remove the door.  
• Insert two "AA" (LR6) alkaline batteries.  
• Replace each battery compartment door and tighten the screws.  
Note: Under normal use conditions, the batteries in the base will require  
replacement more often than the batteries in the remote. When sounds or light  
become faint or movement of the mobile is sluggish, it's time for an adult to  
replace the batteries in the base.  
• If the mobile base begins to operate erratically, you may need to reset the  
electronics. Slide the power/volume switch off and back on. If the remote  
begins to operate erratically, you may need to reset the electronics. Remove the  
batteries and reinstall them.  
©2012 Mattel. All Rights Reserved.  
PRINTED IN CHINA  
K3799c-0920  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Assembly  
Crib Adaptor  
Base  
1
• Fit the crib adaptor to the base.  
• Tighten the four screws in the crib adaptor.  
Arm  
PRESS  
SLIDE  
Socket  
Base  
2
• First press the button next to the socket  
and then slide the socket  
door open  
.
• Fit the arm into the socket in the base.  
• Tighten both screws in the arm.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Assembly  
Mobile Hub  
3
• Fit the mobile hub onto the end of the arm.  
• Tighten both screws in the arm to secure the mobile hub.  
Hint: You may want to attach the soft toys to the mobile hub before assembling  
the arm to the mobile hub. Please refer to assembly step 5 for instructions to  
assemble the soft toys.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Assembly  
Leaves  
4
“Snap” the leaves into the slots in the mobile hub.  
5
Soft Toys  
• Fit the soft toys to the pegs on the underside of the mobile hub.  
• Tighten the screw in each toy to secure each to the mobile hub.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Crib Attachment  
Crib Top Rail  
Base  
Clamp  
• Fit the base onto the crib top rail, so that the threaded peg extends outside  
the crib.  
• Fit the clamp onto the threaded peg and turn the clamp clockwise to secure the  
base to the crib. Do not over-tighten the clamp.  
Bottom  
of Base  
Mattress  
At least 7 inches  
(18 cm)  
• If the distance between the bottom of the base and the mattress is less than  
7 inches (18 cm), lower the crib mattress.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Remote Use  
• Press the button on the remote to activate music, lights and motion.  
• Press again to stop.  
• In the unlikely event that use of the remote interferes with normal use  
of other remote controlled equiment, such as televisions or stereos, or use of  
other electronic or battery powered appliances interfere with operation of the  
mobile, do not use both at the same time.  
• You may notice a loss of range between the remote and the mobile when using  
in bright light. For best performance, avoid using the remote in areas of bright  
light. Move the mobile, or reduce the amount of light to improve performance.  
• Position the mobile so that the receiver arrow points towards the area that the  
remote will be used. Make sure there is a clear path between the remote and  
the mobile. Point the end of the remote toward the mobile receiver and  
press the button.  
Note: The remote will remain active for about one hour. Slide the power/volume  
switch on the mobile off, then on again to reactivate.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Classical Music, Rainforest Sounds, Lights and Motion  
Lights andd Motion Seelect SSwitch  
Power/Volumme Switch  
Choose from three settings:  
ON with low volume  
ON with higher volume  
OFF  
Lights and Music  
Lights, Music and Motion  
Motion and Music  
Music and Sound Select Buttons  
Choose classical music from Bach,  
Beethoven and Mozart or soothing  
sounds of the rain forest.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Convert to a Cribside Music Box  
Remove the mobile and use as a music box with a night light!  
• Loosen both screws in the arm near  
the base.  
Arm  
• Lift and remove the arm with mobile  
from the base.  
• Close the small door on top of the  
base. Store the mobile in a safe  
place for future use.  
Base  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
FCC Statement (United States Only)  
This equipment has been tested and  
found to comply with the limits for  
a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits  
are designed to provide reasonable  
protection against harmful interference  
in a residential installation. This  
equipment generates, uses and can  
radiate radio frequency energy and,  
if not installed and used in accordance  
with the instructions, may cause  
harmful interference to radio  
CONSUMER ASSIS
T
A
NCE  
1-800-432-5437 (US & Canada)  
1300 135 312 (Australia)  
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.  
Hearing-impaired consumers: 1-800-382-7470.  
Outside the United States:  
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,  
Great Britain: Mattel UK Ltd, Vanwall Business Park,  
Maidenhead SL6 4UB. Helpline: 01628 500303.  
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.  
Australia: Mattel Australia Pty. Ltd., 658 Church Street,  
Locked Bag #870, Richmond, Victoria 3121 Australia.  
New Zealand: 16-18 William Pickering Drive,  
Albany 1331, Auckland.  
communications. However, there is  
no guarantee that interference will  
not occur in a particular installation.  
If this equipment does cause harmful  
interference to radio or television  
reception, which can be determined by  
turning the equipment off and on, the  
user is encouraged to try to correct  
the interference by one or more of the  
following measures:  
• Reorient or relocate the  
receiving antenna.  
• Increase the separation between the  
equipment and receiver.  
ICES-003  
This Class B digital apparatus  
complies with Canadian ICES-003.  
Operation is subject to the following  
two conditions: (1) this device may  
not cause harmful interference and  
(2) this device must accept any  
interference received, including  
interference that may cause  
undesired operation.  
NMB-003  
• Consult the dealer or an experienced  
radio/TV technician for help.  
Cet appareil numérique de la classe  
B est conforme à la norme NMB-  
003 du Canada. Lutilisation de ce  
dispositif est autorisée seulement  
aux conditions suivantes : (1) il ne  
doit pas produire de brouillage et  
(2) l’utilisateur du dispositif doit  
être prêt à accepter tout brouillage  
radioélectrique reçu, même si  
ce brouillage est susceptible de  
compromettre le fonctionnement  
du dispositif.  
Note: Changes or modifications  
not expressly approved by the  
manufacturer responsible for  
compliance could void the user’s  
authority to operate the equipment.  
This device complies with Part 15 of  
the FCC Rules. Operation is subject  
to the following two conditions: (1)  
This device may not cause harmful  
interference and (2) this device must  
accept any interference received,  
including interference that may cause  
undesired operation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  

Cobalt Networks Microphone Co11 User Manual
Cuisinart Wok Cuisinart Electric Wok User Manual
Digicom Security Camera IP Camera 300W User Manual
Dixon Lawn Mower Ztr 44 Ztr 36 Ztr 42 Ztr 44 User Manual
Dukane Projector 8946 User Manual
Electro Voice Microphone RE200 User Manual
Electro Voice Portable Speaker MB3 User Manual
Gefen Network Card TSE100 User Manual
GE Monogram Refrigerator ZDOD240 User Manual
GE Oven JGKS16GEH User Manual