T H E S O U N D T H A T C R E A T E S L E G E N D S
Bullet Amp
TYPE: PR 241
,
Owners Manual
P/N 041526
Download from Www.Somanuals.com. All Manuals Search And Download.
Bullet / Bullet Reverb Front Panel Functions
A
B
C D E
F
G
H
I
J
K L M
A. INPUT - A high impedance, high sensitivity plug-in
I. REVERB - ( BULLET REVERB ONLY.) Adjusts the amount
of reverberated signal mixed with the original dry
signal for both the Normal and Drive channels.
connection for instruments.
B. NORMAL VOLUME - Adjusts the overall loudness of the
Normal Channel.
J. EXTERNAL SPEAKER - This jack provides an output to
an external speaker enclosure. The enclosure must
have a minimum impedance of 8Ω Use of this jack
automatically disables the internal speaker. DO NOT
PLUG HEAD PHONES IN HERE.
C. GAIN - Adjusts the amount of preamp amplification in
the Drive Channel. Cleaner sound is achieved at lower
gain settings; high gain settings will produce more
sustain and distortion. This control works in conjunction
with the DRIVE VOLUME control (item E) to set the overall
loudness of the Drive Channel.
K. HEADPHONES - This jack provides an output to
standard stereo or mono headphones for private
listening. NOTE: Use of this jack automatically disables
the speaker. CAUTION: Prolonged listening at high
levels may be hazardous to your hearing! This jack can
also be used as an unbalanced line output by using
either a stereo or mono 1/ 4 inch phone plug
connection.
D. DRIVE SELECT - Activates the Drive Channel.
E. DRIVE VOLUME - Adjusts the overall loudness of the
Drive Channel.
F. TREBLE - Adjusts the amount of boost or cut in the high
frequency range.
L. POWER INDICATOR - When this indicator is
illuminated the Bullet / Bullet Reverb is receiving AC
power.
G. MID - Adjusts the overall tone quality without affecting
the signal level. High MID settings will provide emphasis
in the midrange frequencies whereas a lower setting will
notch the midrange to produce sounds characteristic of
most “metal” music.
M. POWER SWITCH - This switch turns the AC power ON
and OFF. When the switch is OFF the amplifier is
completely shut down.
H. BASS - Adjusts the amount of boost or cut in the low
LINE CORD - This amplifier is equipped with a grounding
type supply cord to reduce the possibility of shock hazard.
Be sure to connect it to a grounded receptacle. DO NOT
ALTER THE AC PLUG.
frequency range.
Download from Www.Somanuals.com. All Manuals Search And Download.
Bullet / Bullet Reverb Specifications
PART NUMBER:
Bullet Amp
Bullet Reverb Amp
120V VERSION: 22-6705
230V VERSION: 22-6765
120V VERSION: 22-6706
230V VERSION: 22-6766
INPUT IMPEDANCE:
NOMINAL INPUT LEVEL:
POWER OUTPUT:
Greater than 1 Meg Ohm
100 mV
15 Watts R.M.S.
8 Ohms
RATED LOAD IMPEDANCE:
POWER REQUIREMENTS:
SPEAKER COMPLEMENT:
DIMENSIONS:
120V VERSION: 120 VAC 60 Hz., .28A Max.
230V VERSION: 230 VAC 50 Hz., .14A Max.
One 8 Ohm Special Design 8” Speaker (P/ N 025421)
Height: 12-3/ 8”
Width: 13-1/ 4”
Depth: 7-1/ 8’
(31.4cm)
(33.7cm)
(18.1cm)
WEIGHT:
SOUND:
15lbs.
(6.8kg)
Unbelievable!!
WARNING:
NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA 9 1 7 2 0
Download from Www.Somanuals.com. All Manuals Search And Download.
|