EBD331e
Indoor/Outdoor Mini Ball Camera
700TVL, 3-Axis, IP66, IR
User’s Manual
Copyright © EverFocus Electronics Corp,
Release Date: August, 2012
Download from Www.Somanuals.com. All Manuals Search And Download.
EBD331e
1. INTRODUCTION
The EBD331e Ball camera is equipped with a 1/3” Sony 960H CCD image
sensor providing resolution of 700 TVL. Featured with the Digital Wide
Dynamic Range (D‐WDR) function, the camera can provide clear images
even under back light circumstances where intensity of illumination can
vary excessively.
The EBD331e comes with 24 IR LEDs, supporting up to 15m (~50ft.) IR
distance in night vision. The camera can work in both indoor and outdoor
environments. The IP66‐rating and vandal proof housing make it suitable
for outdoor use.
Model Name
EBD331e/N
EBD331e/P
Scanning System
NTSC
PAL
Note: The models vary among countries. Please visit EverFocus regional
Websites for detailed ordering information.
1.1 FEATURES
3‐Axis, Sony 1/3” 960H CCD Sensor, 700 TVL resolution
Sony Effio‐E platform to provide advanced camera functions
Fixed Lens f=3.6mm
24 IR LEDs reach up to 15m (~50ft.) IR distance
Supports double glass
D‐WDR function based on Sony’s ATR technology
DNR function that reduces image noise to save storage space
High sensitivity, low smear, high anti‐blooming and high S/N ratio for
high performance video
Built‐in Auto Electronic Shutter (AES), Auto Gain Control (AGC) and
Auto White Balance (AWB)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
EBD331e
1.2 PACKAGE CONTENTS
1. EBD331e camera x 1
3. User Manual x 1
2. Mounting Template x 1
4. Accessory kit x 1 (4 Screws, 4 Anchors
and one Hexagon Wrench)
5. Power Adapter Pigtail x 1
1.3 CABLE DEFINITIONS
Cable Name
Description
Connects to the 12V DC power source. You can
optionally use the supplied Power Adapter Pigtail or a
power adapter.
Power Cable
Video‐Out Cable Connects to a DVR or a portable monitor for adjusting
(BNC)
camera angles.
Connects one end to the Power Cable, and the other
end to the 12V DC power source (black wire to ground
end; black / white wire to positive end.
Power Adapter
Pigtail
1.4 DIMENSIONS
2
Download from Www.Somanuals.com. All Manuals Search And Download.
EBD331e
2. SPECIFICATIONS
Pickup Device
Video Format
Picture Elements
Horizontal Resolution
Sensitivity
1/3" SONY 960H CCD
NTSC or PAL (depends on model selected)
1020 x 508 (NTSC), 1020 x 596 (PAL)
700 TVL
0.01 Lux / F=1.2; 0 Lux IR On
Over 48dB (AGC off)
1/50 (1/60) ~ 1/100,000 sec.
BNC 1.0 Vp-p ,75ohm
0.45
S/N Ratio
Electronic Shutter
Video Output
Gamma Correction
Lens Type
Fixed Lens f=3.6mm / F=2.0
Yes
Auto Gain Control
White Balance
Sync. Mode
Auto
Internal Sync.
Day & Night
Yes, Day & Night auto switch
On
DNR
D-WDR
Auto (Sony ATR)
24 Units IR LED
IR LED
IR Wavelength
IR Distance
850nm
15m (~50ft.)
Power Source
Power Consumption
12V DC
12V DC: 310mA / 4W max.
Operating Temperature -10°C~50°C / 14°F~122°F
Humidity
20% ~ 80% non-condensing
93 x 65 mm / 3.66 x 2.56 in
310 g / 0.7 lb
Dimensions (O.D x H)
Weight
Certifications
CE / FCC
3
Download from Www.Somanuals.com. All Manuals Search And Download.
EBD331e
3. INSTALLATION & OPERATION
1. Unscrew the Set Screw using the supplied Hexagon Wrench.
2. Unscrew the Outer Housing by twisting it counterclockwise and then
remove the Outer Housing from the Camera Base.
Outer Housing
Camera Base
3. Paste the supplied mounting template onto a desired location on the
ceiling / wall. Drill the four small holes for screwing the camera with
the supplied Screws and Anchors, and the circle in the middle only if
you wish to run the wires into the wall.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EBD331e
4. Insert the supplied 4 Anchors into the 4 holes on the ceiling / wall.
5. Screw the Camera Base to the ceiling / wall using the supplied 4
Screws.
a. If you want to wire the cables from the side cut of the Camera
Base, run the cables through the Camera Base first, attach and
then screw the Camera Base to the ceiling / wall.
b. If you want to wire the cables through the wall, attach and then
screw the Camera Base to the ceiling / wall. Attach the Camera
Body to the Camera Base.
6. Connect the camera to the 12V DC power source using the supplied
Power Adapter Pigtail or a power adapter.
7. Connect the camera to a DVR or a portable monitor using the
Video‐Out cable for viewing the camera view while adjusting camera
angles.
8. Screw back the Outer Housing and adjust the camera angle
simultaneously.
9. Screw back the Set Screw using the supplied Hexagon Wrench.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
EBD331e
EverFocus Electronics Corp.
EverFocus Taiwan:
EverFocus Europe - Germany:
Albert-Einstein-Strasse 1, D-46446
Emmerich, Germany
12F, No.79, Sec. 1, Shin-Tai Wu Road,
Hsi-Chih, Taipei, Taiwan
TEL: +886 2 2698 2334
TEL: +49 2822 93940
FAX: +886 2 2698 2380
FAX: +49 2822 939495
EverFocus China - Beijing:
EverFocus China - Shenzhen:
4F, No. 2, D4 Building, Wan Yelong
Industrial Park, Tangtou Road, Shiyan,
Baoan, Shenzhen, Guangdong 518101,
China
Room 609, Technology Trade Building,
Shangdi Information Industry Base,
Haidian District, Beijing 100085, China
TEL: +86 10 6297 3336~39
FAX: +86 10 6297 1423
TEL: +86 755 2765 1313
FAX: +86 755 2765 0337
EverFocus USA - New York:
EverFocus USA - California:
1801 Highland Avenue, Unit A, Duarte, CA 91010, 415 Oser Avenue, Unit S, Hauppauge, NY
USA
11788, USA
TEL: +1 631 436 5070
FAX: +1 631 436 5027
TEL: +1 626 844 8888
FAX: +1 626 844 8838
EverFocus Japan:
EverFocus Europe - UK:
Unit 12, Spitfire Business Park,
Hawker Road, Croydon Surrey, CR0 4WD,
UK
TEL: +44 20 8649 9757 / +44 845 430 9999
FAX: +44 20 8649 9907
5F, Kinshicho City Building, 2-13-4
Koto-Bashi,Sumida-Ku, Tokyo, 130-0022, Japan
TEL: +81 3 5625 8188
FAX: +81 3 5625 8189
EverFocus India:
Suite 803, Housefin Bhavan, C-21, Bandra Kurla
Complex, Bandra (East), Mumbai 400051, India
TEL: +91 22 6128 8700
FAX: +91 22 6128 8705
Ihr EverFocus Produkt wurde entwickelt
Your EverFocus product is designed
and manufactured with high quality
materials and components which can
be recycled and reused.
This symbol means that electrical and
electronic equipment, at their
end-of-life, should be disposed of
separately from your household waste.
Please, dispose of this equipment at
your local community waste
und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass
elektrische und elektronische Geräte am
Ende ihrer Nutzungsdauer vom
Hausmüll getrennt entsorgt werden
sollen.
Bitte entsorgen Sie dieses Gerät bei
Ihrer örtlichen kommunalen
Sammelstelle oder im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben
collection/recycling centre.
In the European Union there are
separate collection systems for used
electrical and electronic product.
Please, help us to conserve the
environment we live in!
Download from Www.Somanuals.com. All Manuals Search And Download.
|