RE16
Variable-D® Dynamic
Supercardioid
Microphone
Key Features:
•
•
•
•
Reduced proximity effect
Effective internal pop protection
Little off-axis coloration
Hum-bucking coil and steel case offer
excellent hum rejections
•
Bass roll-off switch
General Description:
Technical Specifications:
The Electro-Voice® RE16 is a Variable-D® dynamic
supercardioid microphone designed for the most exacting
professional use. It is like the RE15, except that it uses a
unique blast filter. The blast filter, an integral part of the RE16,
permits handheld and outdoor use without “P-pops” or
excessive wind noise. Utilizing the Variable-D® design the
RE16 features a directional characteristic independent of
frequency. The result is a microphone that generates little
off-axis coloration while providing the greatest rejection of
unwanted sounds. A supercardioid, the RE16 provides its
greatest rejection at 150° off-axis. (Supercardioids provide
greatest rejection in the horizontal plane when the
microphone is tilted in its most natural position -30° from
horizontal, as on a boom or floor stand). An easily operated
“bass tilt” switch corrects spectrum balance for boom use
and other longer-reach situations. A hum-bucking coil and
screw-machined steel outer casing provides 25 dB of hum
rejection. Hum pickup level is -125 dBm (re: .001 gauss
field). Using the mechanical nesting concept of design, by
means of which the internal transducer parts are nested
one within another, the RE16 transducer is a nearly solid
mechanical structure that is highly resistant to damage from
mechanical shock. The MemraflexTM grille screen resists
deformation. The exclusive nonmetallic Electro-Voice
Acoustalloy® diaphragm is virtually unaffected by extreme
atmospheric conditions. A carefully designed steel outer
case provides additional mechanical protection. The finish
is nonreflecting fawn beige.
Generation Element: Dynamic
Frequency Response: 80 Hz to 15,000 Hz (see chart)
Polar Pattern: Supercardioid
Impedance, Low-Z: 150 ohms (nominal)
Sensitivity, Open Circuit 1.4mV/Pascal
Voltage, 1 kHz:
Hum Pickup Level -125 dBm
(.001 gauss field):
Diaphragm Material: Electro-Voice Acoustalloy®
Case Material: Steel
Finish: Fawn Beige
Accessories Included: 311 Stand Adapter
Zippered Vinyl Carrying Pouch
Optional Accessories: 376 Charcoal Windscreen
379-1 Black Windscreen
379-2 Red Windscreen
422A Desk Stand
Dimensions: Length = 187.3mm (7.38")
Max. Diameter = 45.2mm (1.78")
Shank Diameter = 19.1mm (0.75")
Net Weight: 227 grams (8 oz.)
Download from Www.Somanuals.com. All Manuals Search And Download.
|