Eclipse Fujitsu Ten Marine Radio CD5425E User Manual

Excellent Sound Quality CD/Memory Stick Receiver with MP3/WMA  
MODEL  
Superb Sound Quality CD Receiver with MP3  
MODEL  
INSTALLATION MANUAL  
Be sure to read this installation manual thoroughly before carrying out installation and making  
connections. If installation methods or non-standard parts that are not specified in this installation  
manual are used, accidents or injury may result.  
Professional installation is recommended, contact the place of purchase to schedule an appointment.  
After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for  
later reference.  
To dealers:  
Give this installation manual to the customer after installation and connections have been completed.  
Contents  
Components  
2
3
Before  
installation  
For your safety in using the CD8445E or CD5425E  
Names and functions of terminals  
System connection example  
4
6
Connections  
Installation  
Installing the main unit  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD8445E or CD5425E  
For your safety in using the  
Warning and caution signs, illustrated below, are posted throughout this manual as well as on the CD8445E  
and CD5425E. They show safe and correct ways to handle the product so as to prevent personal injury to  
you and others and to avoid damage to property.  
Before reading through the manual, take time to read through and learn the important information listed in  
this section.  
This sign indicates a situation in which incorrect handling through disregard  
of a sign might result in death or serious personal injury.  
This sign indicates a situation in which incorrect handling through disregard of a sign  
might result in personal injury or may result solely in damage to property.  
This section contains information that can help to prevent problems and  
damage to the unit, and also contains other useful information.  
Tip  
This equipment requires 12V DC and should only be  
installed in a vehicle with a 12V negative earth electrical  
system. Any other installation may cause a fire or other  
severe damage to the equipment and the vehicle.  
Air bags are vital safety equipment. Never install equipment  
in a way which will alter air bag wiring or interfere with air  
bag deployment. Air bags must function properly in the  
event of an accident.  
When installing equipment, do not remove or alter existing  
vehicle fasteners, including nuts, bolts, screws, clips, and  
fittings. Never detach, move or alter existing vehicle wiring,  
including electrical grounds and straps. Alteration of existing  
vehicle components may make the vehicle unsafe to  
operate.  
For your protection, never use a power drill without safety  
glasses or goggles. Debris or broken drill bits may cause  
severe eye injuries, including blindness.  
Use electrical tape to insulate the ends of all wires, even if  
not used. Proper insulation prevents arcs, shocks and fires.  
Do not disassemble or alter this equipment. Accidents, fires  
Before installation, remove the negative  
battery terminal  
to prevent shocks, electrical arcing, fires, and damage to  
vehicle wiring and the equipment you are installing.  
or shocks may result.  
Always replace fuses with fuses of identical capacity and  
characteristics. Never use a higher-rated fuse than the  
original. Using the wrong type of fuse may cause a fire or  
severe damage.  
Secure wiring with tape or plastic ties so that wires do not  
interfere with vehicle operation, including brake pedal, gear  
shifter and steering. Position wires so that they will not be  
rubbed, abraded, or damaged by moving vehicle  
components, including power seats.  
Do not modify this system for use other than that specified  
herein. Also, do not deviate from the installation procedures  
described herein; Eclipse will not be held liable for damages  
including, but not limited to serious injury, death or property  
damage resulting from installations that enable unintended  
operation.  
To avoid equipment and vehicle damage, including fire,  
never supply power to installed equipment in a way which  
will overload the capacity of an existing vehicle circuit.  
Never leave a power supply wire or connection uninsulated.  
Always install supplied fuses, circuit breakers, and relays  
Wiring and installing this equipment requires expertise and  
Do not block the fan, heat sink or vents for this unit. When  
fan, heat sink or vent are blocked, the interior overheats,  
and fires may result.  
experience. Professional installation is recommended.  
Consult with your dealer or a professional installer. Incorrect  
wiring may damage the equipment or interfere with safe  
vehicle operation.  
Connect as specified in the installation manual. If not  
connected normally, fires or accidents may result.  
Use only the accessory parts as specified. Using other parts  
may cause damage to the equipment or cause parts to fall  
or fly off the equipment.  
When installing in vehicles equipped with air bags, check  
the manufacturer's cautions regarding operation before  
operating. Airbags may not operate properly.  
Do not install the unit in places where it may get dew  
Carry out the wiring such that cords are not pinched by  
condensation on (around the air conditioning hose, etc.),  
come in contact with water, or in conditions of high  
moisture, dust or oily smoke. If water, moisture, dust or oily  
smoke enters this unit, smoke, fires or malfunctions may  
result.  
movable parts such as seat rails, and screw parts of the  
vehicle body. Accidents, fires and shocks may result from  
disconnection and electrical shorts.  
Carry out the wiring such that the cord does not make  
contact with metal parts. The cord may be damaged by  
contact with metal parts, resulting in fire and shocks.  
Avoid installing in places where it cannot be fastened  
securely or where there are strong vibrations. Also, if you  
installed the unit with double-sided tape, first wipe away dirt  
and wax from the installation area. Otherwise, the unit may  
come loose due to vibration while driving, causing problems  
for driving and resulting in traffic accidents or injuries.  
Avoid hot surfaces when wiring equipment. High  
temperatures may damage wiring, causing shorts, arcing  
and fires.  
When changing the installation location for this equipment,  
Do not install in places with direct sunlight or where it will be  
please consult the dealer where you bought it for safety  
reasons. Expertise is necessary for removal and  
installation.  
hit directly by hot air from the heater. This may increase the  
temperature of the interior of this equipment, resulting in  
fires and malfunctions.  
- -  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names and functions of terminals  
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current  
capacity of the power cable is exceeded, fire and electric shocks may result.  
The cables should be secured with tape or a similar securing method to prevent any obstructions while  
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,  
or brake pedal, accidents may result.  
If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire  
insulating method around the connection to insulate it. If the connection is not insulated, fire or  
accidents may result.  
MAIN UNIT  
1
ANTENNA PLUG  
E
D
16P  
C
A
B
INTERCONNECTING CABLE  
(Power and speaker connector)  
2
4
3
1
Tip*1  
Tip*1  
TO VEHICLE-SIDE  
CONNECTOR  
2
The positions of the B+ and ACC pins on the connector may vary  
depending on the vehicle. In such cases, replace the end of the  
connector. Ask your dealer for details on connector pin positions.  
Tip  
This illustration shows the CD8445E. The CD5425E differs slightly from this illustration.  
Refer to page 5 for details on the wire colours and connection points for interconnecting cables  
.
2
Refer to page 5 for details on connection points  
to  
for the main unit cables and  
A
E
terminals.  
- -  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wire colours and connection points for connection cables  
2
1
Antenna power supply (Blue)  
Connect to the automatic-antenna control terminal of the vehicle.  
2
Control power supply (Blue/White)  
Connect the control terminal for the external amplifier, etc.  
3
Cellular phone mute Wire (Pink)  
Connect to the earth output terminal on a mobile phone.  
4
Earth (Black)  
Connect where good body earthing is available.  
Main unit connections  
E-LAN terminal (13P)  
Connect to the E-LAN terminal of the CD changer, etc.  
A
Front line-out terminal  
B
Connect to the RCA connector of an external amplifier.  
Rear line-out terminal  
Connect to the RCA connector of an external amplifier.  
C
Line-out terminal (Non fader)  
D
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with  
a low bass filter is connected.  
E
AUX in terminals (CD8445E only)  
Connect if using together with portable audio equipment that is sold separately.  
* If the output from the connected equipment is via a mini plug, it will need to be converted to RCA.  
-
If installing to a vehicle with no ACC position  
-
Tip  
If installing to a vehicle with no ACC position, be sure to explain the following to the customer when  
handing back the vehicle.  
“When getting out of the vehicle, be sure to press the [PWR] button on the main unit for 2  
seconds or more while the power is still on, and then turn off the power.” If they forget to turn off  
the power, the battery will be drained.  
-
Vehicle connections  
-
Tip  
You will need to purchase the necessary component adapter cable for the vehicle so that the power  
supplies can be utilised. (Contact the dealer for further details.)  
- -  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
System connection example  
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current  
capacity of the power cable is exceeded, fire and electric shocks may result.  
The cables should be secured with tape or a similar securing method to prevent any obstructions while  
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,  
or brake pedal, accidents may result.  
If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire  
insulating method around the connection to insulate it. If the connection is not insulated, fire or  
accidents may result.  
Tip  
Install and connect all of the peripheral units before connecting them to the main unit.  
Do not remove any of the protective caps (RCA, etc.) unless in use.  
MAIN UNIT  
1
ANTENNA PLUG  
16P  
13P  
DIN CABLE  
(Supplied with CD changer)  
TO EARTH  
TO VEHICLE-SIDE  
CONNECTOR  
2
INTERCONNECTING  
CABLE  
(Power and speaker  
connector)  
DIGITAL OUT  
(Do not remove cap)  
13P  
2P  
CH3083  
(sold separately)  
TO EARTH  
POWER CONNECTOR CABLE  
(Supplied with CD changer)  
- -  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the main unit  
-
Installation angle  
-
Front  
Tip  
To maintain proper function, the unit must be  
mounted at less than 30 degrees. If the angle is in  
excess of 30 degrees, CD skipping or ejection may  
occur.  
30˚ or less  
Level (reference)  
- Main unit installation example (If installing the main unit using the mounting sleeve) -  
Tip  
Carefully bind any excess length of cord that is  
connected to the main unit and secure it to an  
area of empty space in the vehicle so that it does  
not move around or get caught in the main unit or  
vehicle-side equipment. If the cords are not  
handled correctly, operating problems or short-  
circuits may occur, and this may result in the  
danger of fire or other accidents.  
Dashboard or console box  
Bend the mounting  
tabs.  
Connect all cables before installing the main  
unit.  
3 Mounting sleeve  
Insert the mounting sleeve into the opening in the  
vehicle dashboard or console box.  
1
2
Use a screwdriver or the like to bend the tabs in  
the mounting sleeve to secure the mounting  
sleeve.  
Main unit  
1
Attach the side brackets to the main unit using  
flathead screws.  
3
7
Flat head  
screws  
(Red:M5 x 8)  
x 2  
Tip  
Be sure to use the supplied accessory mounting  
screws (Red:M5 x 8) as the mounting screws. If  
any other screws are used, they may damage the  
inside of the unit.  
Side brackets  
4
Mount the stud bolt to the main unit.  
4
5
Metal of vehicle  
Insert the main unit into the mounting sleeve until  
it locks in place.  
Dashboard or console box  
Fasten the rear of the main unit.  
Install the bezel on the main unit.  
6
7
9
Bushing  
Tip  
Stud bolt  
8
Be careful not to forcefully push on the main unit's  
display or buttons during installation. This may  
result in damage to the main unit.  
This installation method is only one example.  
When installing the main unit to the vehicle, be  
sure to as the place of purchase for information  
on what installation method to use.  
3
Mounting sleeve  
5
Bezel  
- -  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
- Main unit installation example (If installing the main unit using the side brackets of the vehicle) -  
Tip  
Carefully bind any excess length of cord that is  
connected to the main unit and secure it to an  
area of empty space in the vehicle so that it does  
not move around or get caught in the main unit or  
vehicle-side equipment. If the cords are not  
handled correctly, operating problems or short-  
circuits may occur, and this may result in the  
danger of fire or other accidents.  
Centre cluster panel  
Pocket, etc  
Connect all cables before installing the main  
unit.  
Remove the pocket and any other accessories  
from the centre cluster to make room for the main  
unit.  
1
Mounting bolts  
Remove the mounting brackets for the pocket.  
2
3
Main unit  
1
Attach the brackets to the main unit.  
Tip  
Be sure to use the supplied accessory mounting  
screws (Red:M5 x 8) as the mounting screws. If  
any other screws are used, they may damage the  
inside of the unit.  
Hex-head bolt  
(Red:M5 x 8) x 4  
6
Screw  
x 4  
Pocket  
Install the main unit in the vehicle.  
4
Mounting bracket  
Hex-head bolt  
Flat head  
7
Tip  
6
screw  
(Red:M5 x 8) x 4  
(Red:M5x8) x 4  
Be careful not to forcefully push on the main unit's  
display or buttons during installation. This may  
result in damage to the main unit.  
This installation method is only one example.  
When installing the main unit to the vehicle, be  
sure to as the place of purchase for information  
on what installation method to use.  
Select the screws in accordance with the shapes  
of the screw holes in the mounting bracket.  
- -  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

CNET Network Router CWR 854 User Manual
Crown Audio Microphone CM SB User Manual
Curtis Mathes CRT Television CM 13102 User Manual
Delta Electronics Network Card SPBD 155F4J1R User Manual
Electro Voice Portable Speaker DMS 1152 Series User Manual
First Alert Home Security System FA130CP User Manual
Fisher Price Automobile 73520 User Manual
Fisher Price Toddler Furniture 79415 User Manual
Frigidaire Dehumidifier 66129900793 User Manual
Gefen Log Splitter GTB HDFST 144 User Manual