Eclipse Fujitsu Ten Car Stereo System CD3424 User Manual

MODEL  
CD3424  
ESN E3 High-Power CD Receiver with  
MP3 Decoder and Remote  
OWNER'S MANUAL  
We appreciate your purchase of this receiver.  
Please read through this manual for correct operation.  
We suggest that after reading it you keep this manual  
in a safe place for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning  
• Do not place the vinyl storage bag over a person. It may cause  
a serious accident or death by suffocation.  
• Do not adjust the controls while driving the car. To adjust the  
controls, stop the car in a safe location.  
• To prevent accidents, store batteries for the remote control out  
of the reach of small children. In case a child swallows a  
battery, consult a physician immediately.  
• Do not disassemble or rebuild this product. Doing so may  
cause an accident, fire or electrical shock.  
• When it is necessary to replace the fuse, always use a fuse of  
the correct rating (number of amperes). Use of fuses with  
higher amperage ratings may cause a fire.  
• Do not operate the product in a malfunctioning condition, for  
instance, when the audio does not play. Doing so may result in  
an accident, fire or electrical shock.  
• If an abnormal situation occurs, such as foreign matter entering  
or liquid splashing on the product, or smoke or a strange odor  
emitting from the unit, shut off the product immediately and  
consult the dealer from whom you purchased it. Continued  
operation may cause an accident, fire or electrical shock.  
• Do not install this product in locations where it may obstruct the  
driver's view, or where it may endanger passengers in the  
vehicle. Otherwise, an accident or injury may result.  
• To prevent damaging the vehicle, confirm the locations of  
hoses, electrical wiring, and the fuel tank prior to drilling holes  
to install this product. Also, take care so that the product does  
not interfere, not come in contact with them. Otherwise, a fire  
may result.  
• Do not install this product in locations where it may interfere  
with the operation of the steering wheel, shift lever, brake  
pedal, etc. Otherwise, an accident or injury may result.  
• When installing this product, never use existing nuts or bolts  
that secure parts of the fuel tank, or the steering or braking  
systems. Otherwise improper steering or braking or a fire may  
result.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Warning  
• To prevent a short circuit from occurring, disconnect the  
battery's negative terminal before installing this product.  
Otherwise, an electric shock or injury may result.  
• When using an existing nut and/or bolt from the vehicle to  
ground this product, do not use any that secure parts of the  
steering or braking systems. Otherwise, an accident may result.  
• Bundle cables and harnesses with electrical tape or wire ties to  
prevent them from interfering with moving parts. If they should  
entangle the steering wheel, shift lever or brake pedal, an  
accident may result.  
• Never supply power to another electrical appliance by splicing  
or tapping into this product's power lead (wire). Otherwise, the  
current capacity of the wire will be exceeded, resulting in a fire  
or electric shock.  
• Never attempt to disassemble or modify the product.  
Otherwise, an accident, fire or electric shock may result.  
• When replacing fuses, be sure to use fuses of the specified  
capacity (amperage). Otherwise, damage to the unit, fire or an  
electric shock may result.  
• When installing the product into a vehicle with a passenger  
side air bag, do not secure it to the air bag's cover or in places  
where it may impede air bag deployment. Otherwise, proper air  
bag operation may not be ensured in the event of an accident,  
causing injury or death.  
• When making holes using a drill or similar tool, be sure to wear  
protective eyewear. Otherwise, an injury such as loss of  
eyesight may result.  
• Exposed wires must be insulated with electrical tape.  
Otherwise, a short circuit, fire, or electric shock may result.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Caution  
• Play the audio at a moderate volume level that permits you to  
hear sounds from outside the car. Driving without being able to  
hear outside sounds may result in an accident.  
• Keep foreign objects out of the disc slot. They may cause fire  
or electrical shock. Another possibility is that discs may be  
damaged or become stuck.  
• Do not stick your fingers or hands into the disc slot. Doing so  
may cause personal injury.  
• This product must be operated only as on-board equipment, or  
it may cause electrical shock or injury.  
• Do not play distorted sounds for long periods of time;  
the speakers may overheat and cause a fire.  
• This product uses an invisible laser light. In case a problem  
develops, be sure to consult the dealer from whom you  
purchased the product. Do not disassemble or rebuild the unit;  
rebuilding it may expose you and others to a dangerous laser  
emission (which would damage eyesight) or cause an  
accident.  
• Never use batteries other than those specified. Do not mix new  
and old cells. Doing so may cause a fire or personal injury due  
to a battery explosion or chemical leaks.  
• Pay attention to the (+) and (-) polarity of the battery when  
installing them in the product. Incorrect installation may cause  
personal injury or product damage spoilage due to a battery  
explosion or chemical leakage.  
• For best results, this product should be installed by a  
professional installer.  
Contact the dealer whom you purchased the product for an  
appointment.  
• When installing this product, be sure to use the supplied  
mounting hardware. If parts other than those supplied are  
used, the unit may be damaged internally, or may not be held  
in place securely and become dislodged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Caution  
• Avoid installing this product in places where it may get wet,  
such as near windows, or in places that are moist or dusty.  
Presence of liquid, moisture or dust inside this product can  
cause short circuiting, resulting in smoke or fire.  
• Do not install this product in locations where it cannot be  
fastened securely, such as places subject to frequent vibration.  
Otherwise, it may become dislodged and cause an accident or  
injury.  
• Do not block this product's vent or heat sink. If either is  
blocked, excessive heat build-up may occur and cause a fire.  
• If this product is not connected properly, a short circuit, fire or  
accident may occur.  
• When routing cables, use care so they do not contact sharp  
metal parts such as brackets or screw tips. Otherwise, a short  
circuit, electric shock, fire or accident may result.  
• Do not obstruct the vent on this product. If blocked, excessive  
heat build-up may occur and cause a fire.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Table of Contents  
Operating precautions ............................................ 11  
Notes on operation ..................................................................... 11  
About compact discs .................................................................. 12  
About cleaning a CD .................................................................. 14  
Names of controls and parts .................................. 15  
ESN security operating procedure ......................... 16  
About ESN .................................................................................. 16  
How to operate the ESN (Key CD) security ............................... 17  
How to program the Key CD ................................................ 17  
How to cancel the Key CD ................................................... 18  
How to change the Key CD .................................................. 19  
How to resume normal operation (ESN security lock out) ... 19  
What happens if an incorrect CD is inserted? ...................... 20  
How to turn the security indicator on/off ..................................... 21  
How to read the Electronic Serial Number ................................. 21  
Basic operation ........................................................ 22  
Turning the power on and off ..................................................... 22  
Listening to a CD ........................................................................ 23  
Listening to the tuner .................................................................. 24  
Adjusting audio volume .............................................................. 24  
Switching audio control modes ................................................... 25  
VOL (VOLUME) Mode ......................................................... 25  
BASS Mode ......................................................................... 25  
TREB (TREBLE) Mode ........................................................ 25  
BAL (BALANCE) Mode ........................................................ 26  
FAD (FADER) Mode ............................................................ 26  
NON-F (NON-FADER) Mode ............................................... 26  
XO-FR (Front/Rear) Mode ................................................... 26  
XO-NF (NON-FADER) Mode ............................................... 27  
NF-PH (NON-FADER PHASE) Mode .................................. 27  
Enabling the loudness control .................................................... 27  
Making changes with Function Mode ......................................... 28  
Disabling the guide tone feature (for button operation) ........ 28  
Setting the time .................................................................... 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
How to operate the CD player ................................. 30  
Listening to CDs ......................................................................... 30  
Advancing to the next track or returning to the beginning of the  
track being played ...................................................................... 31  
Fast Forward/Rewind ................................................................. 31  
Playing the beginning of tracks (SCAN) ..................................... 31  
Repeating the same track (REPEAT) ......................................... 32  
Playing tracks in random order (RANDOM) ............................... 32  
Ejecting the disc ......................................................................... 33  
Displaying CD TEXT .................................................................. 33  
How to operate the MP3 player ............................... 34  
About MP3 .................................................................................. 34  
What is MP3? ....................................................................... 34  
Playable MP3 file standards ................................................ 34  
ID3 tags ................................................................................ 34  
Media ................................................................................... 35  
Format of discs .................................................................... 35  
File names ........................................................................... 36  
Multi-sessions ...................................................................... 36  
Playing MP3 ......................................................................... 36  
MP3 playing time display ..................................................... 36  
Display order of MP3 file/folder names ................................ 36  
Listening to MP3 file ................................................................... 37  
Advancing to the next track (file) or  
returning to the beginning of the track (file) being played .......... 38  
Fast Forward/Rewind ................................................................. 38  
Skipping to the next or previous folder ....................................... 38  
Return to the root directory of the CD ........................................ 38  
Playing the beginning of files (SCAN) ......................................... 39  
Repeating the same file (REPEAT) ............................................ 39  
Playing files in random order (RANDOM) .................................. 40  
Displaying title ............................................................................ 40  
How to operate the tuner ........................................ 41  
Tuning to a station ...................................................................... 41  
Entering stations into memory automatically  
(The automatic preset mode: ASM) .......................................... 42  
Manually setting stations into memory ....................................... 43  
Preset station scan ..................................................................... 44  
Switching the display .................................................................. 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Changing the reception sensitivity for automatic scanning ........ 45  
Changing the radio band location ............................................... 45  
FM reception characteristics ...................................................... 46  
FM reception differs from AM ............................................... 46  
Fading out ............................................................................ 46  
Reception area of FM broadcasts ........................................ 47  
Multipath .............................................................................. 47  
How to use a Card remote control ......................... 48  
Precautions in use of the remote control .................................... 48  
Cleaning the remote control ....................................................... 48  
Turning the power on/off ............................................................ 49  
Adjusting the audio volume ........................................................ 49  
Cutting the volume instantly (muting) ................................... 49  
Switching playback modes ......................................................... 50  
How to play the tuner ................................................................. 50  
Selecting the FM/AM band ................................................... 50  
Selecting a station (manually or automatically) .................... 51  
Selecting preset stations ...................................................... 51  
How to play CDs ......................................................................... 51  
Switching disc mode ............................................................ 51  
Advancing to the next track or returning to the beginning  
of the track being played ...................................................... 52  
Skipping to the next or previous disc ................................... 52  
Replacing the battery ................................................................. 53  
How to use an optional NOB remote control ........ 54  
Turning the power on/off ............................................................ 54  
Adjusting the audio volume ........................................................ 54  
Cutting the volume instantly (muting) ................................... 54  
Switching playback modes ......................................................... 55  
How to play the tuner ................................................................. 55  
Selecting the FM/AM band ................................................... 55  
Selecting a station (manually or automatically) .................... 56  
Selecting preset stations ...................................................... 56  
How to play CDs ......................................................................... 56  
Switching disc mode ............................................................ 56  
Advancing to the next track or returning to the beginning  
of the track being played ...................................................... 57  
Skipping to the next or previous disc ................................... 57  
Replacing the battery ................................................................. 58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
How to operate the receiver with an optional  
CD changer connected............................................. 60  
Listening to a CD......................................................................... 60  
Advancing to the next track or returning to the beginning of  
the track being played ................................................................. 60  
Fast Forward/Rewind .................................................................. 60  
Playing the beginning of tracks (SCAN)...................................... 61  
Repeating the same track (REPEAT).......................................... 61  
Playing tracks in random order (RANDOM) ................................ 62  
Skipping to the next or previous CD............................................ 62  
Specifying a CD to play............................................................... 63  
Switching the display................................................................... 63  
If you have a question: ............................................ 64  
Displayed information (for troubleshooting) ................................ 65  
Specifications .......................................................... 68  
Before installation .................................................... 69  
Components ............................................................................... 69  
Installation angle ........................................................................ 69  
Mounting instruction ............................................... 70  
Mounting the main unit ............................................................... 70  
Names of lead wires and destinations ........................................ 72  
System ....................................................................................... 73  
How to contact customer service .......................... 78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Operating precautions  
Operating precautions  
<Your CD3424 will perform well over a long period of time through correct  
handling and care.>  
Notes on operation  
• For your safety, play only at volume levels that allow outside sounds to be  
heard.  
• We recommend using with this player a disc with  
the logo shown to the left.  
• You can play music CDs(CD-R/CD-RW) on this  
player. Be sure to use discs that have been  
properly processed.  
Depending on the editing equipment used, some  
discs may not play properly.  
• Do not insert anything other than a CD into the  
disc slot.  
Do not insert any foreign objects, such as coins or  
credit cards, into the disc slot. Be especially  
watchful of children’s mischief in this regard.  
• Avoid severe mechanical shock.  
When the player is subjected to severe vibration  
while traveling over a rough surface, playback  
may be intermittent. When a situation like this  
occurs, resume playback after returning to a  
smoother road.  
• About dew condensation.  
In cold or rainy weather, just as the interior glass  
surface gets fogged, dew (water condensation)  
may also settle on the deck. When this occurs,  
disc playback may become intermittent or  
impossible. Dehumidify the air in the vehicle for a  
while before resuming playback.  
• Cleaning the disc slot.  
The disc slot tends to get dusty. Clean it  
occasionally to prevent accumulated dust from  
scratching the discs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Operating precautions  
About compact discs  
• The signal recorded on a compact disc is read by a laser beam, so  
nothing touches the disc surface. A scratch on the recorded surface or a  
badly warped disc may cause deteriorated sound quality or intermittent  
playback. Observe the following precautions to ensure high quality sound  
performance:  
• Do not leave an ejected disc in the disc slot  
for very long; the disc may warp. Discs  
should be stored in their cases and kept  
away from high temperature and humidity.  
• Do not stick a piece of paper or tape on, nor  
write on or scratch either side of a disc.  
• Discs spin at a high speed inside the deck.  
Keep cracked or warped discs out of the  
player to avoid damaging it.  
• Avoid touching the recorded surface when  
handling a disc; handle discs by their edges.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Operating precautions  
About brand new CDs  
About CD accessories  
• You may notice that some brand  
new discs are rough around the  
center hole or outside edge.  
Remove the rough edges with  
the side of a ballpoint pen, etc.  
Rough edges may prevent  
proper loading in the deck.  
Flakes from the rough edges  
may also stick to the recorded  
surface and interfere with  
playback.  
• Do not use accessories  
(stabilizers, protective seals, laser  
lens cleaners, etc.) sold for  
“improving sound performance”  
or “protecting CDs.” The changes  
in CD thickness or outside  
dimensions made by these  
accessories may cause problems  
in the player.  
Rough Edges  
Ballpoint  
pen  
Please be sure NOT to attach any  
ring-shape protector (or other  
accessory) to your discs. Those  
protectors are commercially  
available and said to protect disc  
and to improve sound quality  
(and antivibration effect), but they  
can do more harm than good in  
regular uses. The most common  
problems are disc insertion, disc  
ejections, and won't play  
problems due to the protector  
ring that came off in the disc  
mechanism.  
Rough  
Edges  
Flakes  
Recorded surface  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Operating precautions  
About borrowed CDs  
About irregularly-shaped CDs  
Specially-shaped CDs, like  
heart-shaped or octagonal CDs,  
cannot be played. Do not  
attempt to play them, even with  
an adapter, since they may  
damage the player.  
Do not use a CD with glue or  
remnants of adhesive tape or  
labels. They may cause the CD  
to get stuck inside or damage  
the deck.  
How to remove CDs  
When removing the ejected disc,  
pull it straight out along the slot.  
Pressing downward in the  
process may scratch the  
recorded surface of the disc.  
OKAY  
About cleaning a CD  
Use a commercially available compact disc  
cleaner to clean a CD, wiping lightly from the  
center to the edge.  
Do not use benzine, thinner, LP record spray  
or other cleaners on CDs. They may damage  
a CDs finish.  
XXXX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Names of controls and parts  
Names of controls and parts  
①②  
⑤ ⑥  
⑫⑪ ⑩  
⑨ ⑧ ⑥  
Switches disc modes.  
Ejects compact disc.  
[DISC] button  
[
(EJECT) ] button  
Selects radio preset channels and performs disc mode  
functions.  
Buttons [1] to [6]  
Inserts compact discs.  
Disc slot  
Switches screen display.  
[DISP] button  
Automatically finds radio reception and fast forward/rewind.  
Selects radio stations and CD tracks.  
Turns function mode ON/OFF.  
[SEEK /FAST ] button  
[SEL] button  
[FUNC] button  
Returns to previous screen.  
[RTN] button  
Resets deck functions to default settings.  
Turns deck power ON/OFF.  
[RESET] button  
[PWR] button  
Switches to radio mode and switches radio bands.  
Adjusts volume and performs other functions.  
[FM AM] button  
[AUDIO CONTROL] button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
ESN security operating procedure  
ESN security operating procedure  
About ESN  
This deck incorporates ESN (ECLIPSE Security Network). The ESN is  
a security system which disables all deck functions when the power  
is restored if the deck is stolen from the vehicle. Turning the power of  
the deck off or switching the vehicle's ignition switch off activates the  
security feature.  
Setting or canceling of the security feature can be done with a "Key  
CD". It is necessary to register an music CD as the "Key CD" in  
advance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
ESN security operating procedure  
Button [6]  
[FUNC] button  
How to operate the ESN (Key CD) security  
How to program the Key CD  
Check that the Power is OFF.  
1
2
Press and hold button [6], then the [FUNC] button, and  
hold both for more than one second.  
A [SEC] message appears, then in two seconds it will  
change to [DISC].  
The CD3424 is now ready to accept your Key CD in the CD  
slot.  
If a CD has already been inserted, a [SEC] message appears,  
and then the CD is ejected.  
ATTENTION  
Insert the CD into the slot.  
3
A [SEC] message appears, then the Key CD is ejected.  
If there is a problem with the inserted CD, an [ERR] message  
will appear for two seconds and the CD will be ejected. Reinsert  
the ejected CD.  
ATTENTION  
If a CD causes the [ERR] message to appear twice in a row, a  
[CHANGE] message will appear for two seconds. Try another  
CD.  
The Security indicator will flash whenever the vehicles ignition  
is switched off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
ESN security operating procedure  
Button [6]  
[FUNC] button  
How to cancel the Key CD  
Turn OFF the Power.  
1
2
Press and hold button [6], then the [FUNC] button, and  
hold both for more than one second.  
A [SEC] message appears, then in two seconds it will  
change to [DISC].  
The CD3424 is now ready to accept your Key CD in the CD  
slot.  
If a CD has already been inserted, a [SEC] message appears,  
and then the CD is ejected.  
ATTENTION  
Insert your Key CD into the slot.  
A [CANCEL] message appears, then the Key CD is  
ejected.  
3
The Key CD is cancelled.  
This process cancels the protection for the ESN deck.  
If power to the ESN deck is disconnected, then reconnected, a  
Key CD will not need to be inserted in order to return the unit to  
normal operation.  
ATTENTION  
Inserting a CD other than the Key CD will not cancel the  
protection. Instead, the display [ERR] for two seconds, then the  
normal CD playback mode will activate.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
ESN security operating procedure  
How to change the Key CD  
First, cancel the existing Key CD.  
Refer to How to cancel the Key CD.”  
1
2
Next, program a new Key CD.  
Refer to How to program the Key CD.”  
How to resume normal operation (ESN security lock out)  
If power is disconnected while ESN security is active (a Key  
CD was programmed), operation is disabled until power is  
restored and the unit unlocked. Follow this procedure to  
resume normal operation.  
When the power is turned on after disconnecting the  
battery power, a [SEC] message will appear for two  
seconds. Thereafter, the message changes to [DISC]  
and the CD3424 is ready to accept your Key CD into the  
slot.  
1
Insert your Key CD into the slot.  
2
If the correct CD is inserted, an [OK] message will appear  
for two seconds and the CD will begin playing.  
If an incorrect CD is inserted, an [ERR_] ("ERR" and error  
number) message will appear for two seconds, after which the  
CD will be ejected.  
ATTENTION  
If [ERR5] (the 5th time an error has occurred) appears, [HELP]  
will appear, after which the CD will be ejected. When [HELP]  
appears, carry out the operations for an ESN security lock out  
by following the procedure in "What happens if an incorrect CD  
is inserted?" (See next page).  
You must use the same CD used for Key CD programming; a  
duplicate CD may not work properly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
ESN security operating procedure  
Button [6]  
[FUNC] button  
What happens if an incorrect CD is inserted?  
After the 5th incorrect attempt, the display reads [HELP]  
for five seconds.  
[HELP] will appear for five seconds, after which the serial  
number will appear.  
1
2
Press button [6], then the [FUNC] button, and hold them  
for five seconds.  
After the [SEC] message will appear for two seconds,  
rolling code will appear.  
Press the [FUNC] button.  
A [DISC] message appears.  
You will have five more attempts the correct disc.  
3
4
Insert your Key CD into the slot.  
If the correct CD is inserted, an [OK] message will appear  
for two seconds and CD will be ejected.  
If an incorrect CD is inserted, an [ERR_] ("ERR" and error  
number) message will appear for two seconds, after which the  
CD will be ejected.  
ATTENTION  
This process cancels the protection for the ESN deck.  
Note ꢀ  
If after five tries the correct Key CD is not inserted, the display  
reads [CALL800]; the unit must be returned to Eclipse to be  
reset. In this case, please contact your Eclipse dealer for  
assistance. For country-specific customer service information,  
refer to "How to contact customer service" on page 78.  
Your key CD can be easily forgotten. Write the  
album name in a reminder note (See Page 81).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
ESN security operating procedure  
Button [2]  
Button [4]  
[FUNC] button  
How to turn the security indicator on/off  
Once ESN security is activated, the indicator flashes whenever the  
vehicles ignition is turned off, warning potential thieves that the unit  
is protected. However, if you do not want this visible deterrent, it may  
be turned off.  
With the power OFF, press button [2], then the [FUNC]  
button and hold both for more than one second.  
1
[IND. FLASH] or [IND. -----] appears on the display.  
2
[IND. FLASH] means the security indicator will flash when the  
vehicles ignition is off, and [IND. -----] means it will not. Repeat  
the above steps to reactivate the flash mode.  
How to read the Electronic Serial Number  
Turn OFF the Power.  
1
Press button [4], then the [FUNC] button, and hold both  
for more than one second.  
2
[ESN] appears on the display, followed by an eight-digit  
number; this number is your electronic serial number (ESN).  
You may use this number to identify your Eclipse CD3424 in  
the event it is recovered after being stolen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Basic operation  
Basic operation  
[PWR] button  
This section covers basic operating procedures. For additional  
details, please refer to the sections on specific functions.  
Turning the power on and off  
Turning the power on and off.  
When the power is turned on, the state used when the power was  
turned off such as CD and tuner playing is restored.  
When the vehicle has no ACC position on the ignition switch, care is  
needed when turning off the deck. Follow Step 2 or Step 3 when  
turning off the power.  
When power is OFF, press [PWR] button.  
1
The power will come ON.  
When the deck's power is turned on for the first time or if the  
battery terminals have been disconnected because of a reason  
ATTENTION  
such as vehicle maintenance and the power is then turned back  
on, the deck will start up in FM1 mode. After this, the broadcast  
stations will be searched for automatically and stored in buttons  
[1] to [6].  
When power is ON, press the [PWR] button for less than  
two seconds.  
2
The power will go OFF and the deck will be in Standby.  
If you press the [PWR] button again for more than one second,  
the power will go completely off.  
When power is ON, press the [PWR] button for more  
than two seconds.  
3
The power will go completely OFF.  
If a car is not equipped with an ACC position (for example, a  
European car), keep the [PWR] button depressed for more than  
ATTENTION  
two seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Basic operation  
[DISC] button  
Listening to a CD  
Insert a CD into the disc slot, label side up.  
1
The CD will start playing.  
When a CD is already loaded, press the [DISC] button to switch  
to the CD mode.  
ATTENTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Basic operation  
Buttons [1] to [6]  
[FM AM] button  
[SEEK ] button  
[SEL]  
button  
[AUDIO CONTROL] button  
[FAST ] button  
Listening to the tuner  
Press the [FM AM] button.  
1
This will turn the tuner on.  
Press the [FM AM] button to switch to the desired FM or  
AM bands.  
2
3
4
Radio bands will switch from FM1 FM2 FM3 AM in  
order each time the button is pressed.  
Turn the [SEL] button to the left or right to tune to a  
station.  
Turn to the right: Turnes to higher frequencies.  
Turn to the left: Turnes to lower frequencies.  
Press the [SEEK /FAST ] button to start the automatic  
station search.  
[SEEK ] button: Starts searching toward higher frequencies.  
[FAST ] button: Starts searching toward lower frequencies  
If stations have been stored in memory, pressing a button  
from [1] to [6] will directly select a station. (Refer to the section  
ATTENTION  
“Manually setting stations into memory” on page 43)  
Adjusting audio volume  
Turn the [AUDIO CONTROL] button to the left or right.  
1
Turn to the right: Increases the volume.  
Turn to the left: Decreases the volume.  
Do not adjust the volume or other controls while driving the  
vehicle. Do so only while parked in a safe location.  
Warning  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
Basic operation  
[AUDIO CONTROL] button  
Switching audio control modes  
Various audio control modes may be fine-tuned using this  
procedure.  
Press the [AUDIO CONTROL] button for less than one  
second to select the item to be adjusted.  
1
Modes will switch in the order shown below each time the  
button is pressed.  
VOL  
BASS  
TREB  
BAL  
FAD  
NF-PH  
XO-NF  
XO-FR  
NON-F  
VOL (VOLUME) Mode  
Adjusts volume.  
Turn the [AUDIO CONTROL] button to the left or right.  
Turn to the right: Increases the volume.  
Turn to the left: Decreases the volume.  
BASS Mode  
Adjusts bass level. Bass mode can be adjusted for each  
source (CDP/CDC, FM and AM).  
Turn the [AUDIO CONTROL] button to the left or right.  
Turn to the right: Emphasizes low sounds.  
Turn to the left: Softens low sounds.  
TREB (TREBLE) Mode  
Adjusts treble level. TREBLE mode can be adjusted for each  
source (CDP/CDC, FM and AM).  
Turn the [AUDIO CONTROL] button to the left or right.  
Turn to the right: Emphasizes high sounds.  
Turn to the left: Softens high sounds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Basic operation  
[AUDIO CONTROL] button  
BAL (BALANCE) Mode  
Adjusts left/right speaker balance.  
Turn the [AUDIO CONTROL] button to the left or right.  
Turn to the right: Emphasizes right speakers.  
Turn to the left: Emphasizes left speakers.  
FAD (FADER) Mode  
Adjusts front/rear speaker balance.  
Turn the [AUDIO CONTROL] button to the left or right.  
Turn to the right: Emphasizes front speakers.  
Turn to the left: Emphasizes rear speakers.  
NON-F (NON-FADER) Mode  
Adjusts non-fader level (for connected sub-woofers, etc.).  
Turn the [AUDIO CONTROL] button to the left or right.  
Turn to the right: Increases level.  
Turn to the left: Decreases level.  
XO-FR (Front/Rear) Mode  
Here, the HPF (high-pass filter) to the front and rear pre-outs  
can be switched ON and OFF.  
Since the high-pass filter passes only higher ranges (lower  
ranges are cut off), efficient playback is enabled by cutting off  
lower-range elements not needed for the mid to higher range  
speaker.  
Turn the [AUDIO CONTROL] button to the left or right to switch  
Cross Over (FR) ON/OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Basic operation  
[AUDIO CONTROL] button  
XO-NF (NON-FADER) Mode  
Here, the LPF (low-pass filter) to the non-fader pre-out can be  
switched ON and OFF.  
Since the low-pass filter passes only lower ranges (higher  
ranges are cut off), efficient playback is enabled by cutting off  
mid to higher range elements not needed for a woofer.  
Turn the [AUDIO CONTROL] button to the left or right switch  
Cross Over (NF) ON/OFF.  
NF-PH (NON-FADER PHASE) Mode  
The merging of sound between the front and rear speakers and  
the woofer can be improved by selecting the phase.  
Switch the phase to a phase which lets the speakers combine  
without any disharmony.  
Turn the [AUDIO CONTROL] button to select NORMAL or  
REVERSE.  
NORM: Normal phase  
REV : Reverse phase  
Enabling the loudness control  
The loudness control may be turned on to emphasize low and high  
frequencies at low volume levels.  
Loudness compensates for the apparent weakness of low and high  
frequencies at low volume by boosting the bass and treble levels.  
Press and hold the [AUDIO CONTROL] button until the  
[LOUD ON] display appears on the screen.  
1
To disable the loudness feature, repeat the above procedure to  
display the [LOUD OFF] indication.  
ATTENTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Basic operation  
[SEL]  
button  
[RTN] button  
[FUNC] button  
Making changes with Function Mode  
A variety of settings can be changed.  
Press the [FUNC] button.  
1
The function mode is activated.  
Turn [SEL] button in either direction to display setting  
items for selection.  
2
Setting items will be displayed in the following order when the  
[SEL] button is turned to the right.  
GUIDE TONE  
CLOCK ADJ  
Disabling the guide tone feature (for button operation)  
The receiver is set at the factory to emit a beep tone in  
response to button operation. The guide tone feature may be  
disabled in the following procedure:  
Turn [SEL] button to select GUIDE TONE.  
1
2
Press the [SEL] button.  
The Guide Tone Mode will be switched ON/OFF.  
Turn [SEL] button to select ON or OFF.  
3
4
Press the [RTN] button.  
At this time, other adjustments can also be made in  
Function Mode.  
Press the [FUNC] button to exit Function Mode.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Basic operation  
[SEEK ] button  
[SEL]  
button  
[FAST  
button  
]
[RTN] button  
[FUNC] button  
Setting the time  
This receiver uses the 12-hour display notation.  
Turn [SEL] button to select CLOCK ADJ.  
1
2
Press the [SEL] button.  
The clock adjustment mode is activated.  
Turn [SEL] button to display the item to be selected for  
adjustment.  
3
Hours, minutes or exact hour will be switched each time the  
button is turned.  
Press the [SEEK /FAST ] button.  
4
[SEEK ] button: Turns the time forward.  
[FAST ] button: Turns the time back.  
To set the clock to 0 minutes, 0 seconds (an exact hour),  
press the [SEEK /FAST ] button.  
For example:  
At 3:29: Pressing the [SEEK /FAST ] button returns to 3:00.  
At 3:30: Pressing the [SEEK /FAST ] button advances to 4:00.  
Press the [RTN] button.  
At this time, other adjustments can also be made in  
Function Mode.  
5
6
Press the [FUNC] button to exit Function Mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
How to operate the CD player  
How to operate the CD player  
[DISC] button  
First press the [DISC] button to switch to the disc mode. It is  
assumed here that a CD has already been loaded into the unit.  
Listening to CDs  
Press the [DISC] button.  
1
This starts CD play.  
If an external CD changer is connected, each additional press  
of the [DISC] button will switch modes from CD changer 1 ➔  
CD changer 2 CD player.  
A changer or player with no discs loaded will be skipped.  
Playback may be intermittent when there is a scratch on a CD  
or when the recorded side is dirty.  
Caution  
Only two external CD changers may be connected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
How to operate the CD player  
Button [4]  
[SEEK ] button  
[SEL]  
button  
[FAST ] button  
Advancing to the next track or returning to  
the beginning of the track being played  
Turn the [SEL] button to the left or right.  
1
Turn to the right: Advances to the next track.  
Turn to the left: Returns to the beginning of the track being  
played. (Repeat turning for previous tracks.)  
Fast Forward/Rewind  
Fast forward or rewind the song currently being played.  
Press and hold the [SEEK ] or [FAST ] button.  
1
[SEEK ] button: Fast forward.  
[FAST ] button: Rewind.  
Playing the beginning of tracks (SCAN)  
Press button [4].  
1
Pressing the button causes the player to move up to the next  
track and play it for 10 seconds, then move up to the next track  
and play it for 10 seconds, and so on until the button is  
pressed again.  
To continue playing a desired track, press the button again to  
stop scanning.  
ATTENTION  
After the entire disc is scanned once, ordinary playback starts  
from the point where scanning started.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
How to operate the CD player  
Buttons [5] and [6]  
Repeating the same track (REPEAT)  
Press button [5] to repeat the track being played.  
1
To cancel, press button [5] again.  
Playing tracks in random order (RANDOM)  
Press button [6] to play the tracks in random order.  
1
To cancel, press button [6] again.  
Doing random playback, press button [5] to repeat the track  
being played. To cancel repeat play (go back to random play),  
ATTENTION  
press button [5] again.  
During playback of a particular track: The track being played is  
played repeatedly.  
While searching: The following track is played repeatedly.  
Occasionally the same track happens to be played (selected)  
two or more times in a row; this is normal operation and is no  
sign of a problem.  
When any of the functions - Playing the beginning of tracks,”  
Repeating the same trackand Playing tracks in random  
order- is selected, a message such as [SCAN], [REPEAT] or  
[RANDOM] appears on the display to verify the current function.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
How to operate the CD player  
[DISP] button  
[
(EJECT)] button  
Ejecting the disc  
Press the [ (EJECT)] button.  
1
Disc is ejected.  
Displaying CD TEXT  
Only the built-in CD player supports CD TEXT. It can not be  
displayed with the optional CD changer. If the CD came with a logo  
shown below, it is recorded with a disc title and track titles. These  
information will be displayed during playback.  
Press the [DISP] button.  
1
Each time the button is pressed, the following will be displayed  
in order.  
Elapsed time Disc title/Track title* Clock  
*: The display are shows a maximum of 10 characters and then scrolls  
to display the remaining characters.  
After the disc title is displayed, the track title will be displayed by  
scrolling. After the track title is scrolled the display will be fixed.  
If the CD does not contain any text data, "NO TITLE" will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
How to operate the MP3 player  
How to operate the MP3 player  
About MP3  
The making of MP3 files by recording from sources such as  
broadcasts, records, recordings, videos and live performances  
ATTENTION  
without permission from the copyright holder for uses other than  
personal enjoyment is prohibited.  
What is MP3?  
MP3 (MPEG Audio Layer III) is a standard format for audio compression  
technology. By using MP3, a file can be compressed to one-tenth the size  
of the original.  
This deck has limitations on MP3 file standards and recorded media and  
formats that can be used.  
Playable MP3 file standards  
• Supported standards: MPEG-1 Audio Layer III  
MPEG-2 Audio Layer III  
MPEG-2.5 Audio Layer III  
• Supported sampling frequencies: 32, 44.1, 48 (kHz)  
• Supported bit rate: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160,  
192, 224, 256, 288, 320 (kbps)  
* Supports VBR.  
* Does not support free format.  
• Supported channel modes: stereo, joint stereo, dual channel, monaural  
ID3 tags  
MP3 files have an "ID3 Tag" that allows input of information so that data  
such as song title and artist can be saved.  
This deck supports ID3v.1.0 and ID3v.1.1 tags.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
How to operate the MP3 player  
Media  
Media capable of playing MP3 includes CD-R and CD-RW discs.  
Compared to CD-ROM media commonly used for music discs, CD-R discs  
are fragile in high temperature/high humidity environments and one section  
of the CD-R may become incapable of playback. Fingerprints or scratches  
on the disc may prevent playback or cause skipping during playback.  
Sections of a CD-R may deteriorate if left inside a vehicle for long periods of  
time. It is also recommended that CD-R discs be kept in a light-blocking  
case because the discs are vulnerable to ultra-violet light.  
Format of discs  
The format of discs to be used must be ISO9660 Level 1 or Level 2.  
Control items for this standard are as follows:  
• Maximum directory layers:  
8 layers  
• Maximum characters for folder names/file names: 40 (including "." and 3  
letter file extension)  
• Allowable characters for folder names/file names: A~Z, 0~9, _ (underscore)  
• Number of files/folders possible on a single disc: 512  
[Configuration example for CD supporting MP3]  
Root directory (F1)  
F2  
Folder 2  
001.mp3  
002.mp3  
003.mp3  
004.txt  
Number of files/folders possible on a single  
disc is 512.  
005.mp3  
Files aside from MP3 files (Example: 004.txt)  
also count as single files.  
Folder 158  
Folder 159  
F158  
F159  
001.mp3  
002.mp3  
Folder 255  
F255  
• Total number of folders possible on a single disc: 255  
• Maximum folders this deck can recognize:  
*: A root directory is counted as one folder.  
255*  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
How to operate the MP3 player  
File names  
Only files with the MP3 file extension ".mp3" can be recognized as MP3 and  
played. Be sure to save MP3 files with the ".mp3" file extension. The "MP"  
letters of the file extension will be recognized whether entered as  
uppercase letters or lowercase letters.  
If the ".mp3" file extension is attached to a file other than an MP3  
file, that file will be mistakenly recognized by the deck as an MP3  
Caution  
file and played, resulting in loud noise output that can damage  
the speakers. Be sure to avoid attaching the ".mp3" file extension  
to files that are not MP3 files.  
Multi-sessions  
Multi-sessions are supported, and playing of CD-R and CD-RW discs with  
annotated MP3 files is possible. However, when "Track at once" has been  
written, close the session or process the warning message. Standardize the  
format of each session without changing the format.  
Playing MP3  
When a disc with recorded MP3 files is inserted, the deck first checks all the  
files on the disc. No sound is output while the deck is checking the files on  
the disc. It is recommended that the disc be recorded without files other  
than MP3 files and without unnecessary folders in order to speed up the  
checking of disc files by the deck.  
MP3 playing time display  
It is possible that playing time will not be correct, depending on the writing  
condition of the MP3 file.  
* It is possible that playing time will not be correct when VBR Fast Up/Down  
is operated.  
Display order of MP3 file/folder names  
Names of MP3 folders and files within the same level are displayed in the  
following order.  
1. MP3 folders displayed first, by ascending order of numbers, letters.  
2. Files displayed next, by ascending order of numbers, letters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
How to operate the MP3 player  
[DISC] button  
Button [3]  
Listening to MP3 file  
Press the [DISC] button.  
1
This starts MP3 file play.  
Playback may be intermittent when there is a scratch on a CD or  
when the recorded side is dirty.  
Caution  
Note ꢀ  
When music data recorded in the normal way (CD-DA) is  
present on the same disc with MP3 music files, the normally  
recorded music data will be played. To listen to the MP3 music  
files, press button [3].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
How to operate the MP3 player  
Buttons [1] and [2]  
[SEEK ] button  
[SEL]  
button  
[FAST  
button  
]
[RTN] button  
Advancing to the next track (file) or returning to  
the beginning of the track (file) being played  
Turn the [SEL] button to the left or right.  
1
Turn to the right: Advances to the next track (file).  
Turn to the left: Returns to the beginning of the track (file)  
being played.  
Repeat turning for previous tracks (files).  
Fast Forward /Rewind  
Fast forward or rewind the song currently being played.  
Press and hold the [SEEK ] or [FAST ] button.  
1
[SEEK ] button : Fast forward.  
[FAST ] button : Rewind.  
Skipping to the next or previous folder  
Press button [1] or [2].  
1
Button [1]: Selects the next folder.  
Button [2]: Selects the next lower folder.  
Return to the root directory of the CD  
In the root directory, when a file cannot replay, the system will  
return to the first file that can perform a replay. (In the  
configuration example, the file is returning to 001.mp3. See  
page 35.)  
Press the [RTN] button.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
How to operate the MP3 player  
Buttons [4] and [5]  
Playing the beginning of files (SCAN)  
Press button [4].  
1
Press the button briefly to play just the first 10 seconds of each  
song for all the files in the current folder being played.  
Pressing the button until [ALL SCAN] is displayed will play just  
the first 10 seconds of the first song in each folder.  
•To continue playing a desired track, press the button again to  
ATTENTION  
stop scanning.  
•After the entire disc is scanned once, ordinary playback starts  
from the point where scanning started.  
Repeating the same file (REPEAT)  
Press button [5].  
1
Press the button briefly to repeat the file being played.  
Pressing the button until [ALL REPEAT] is displayed will repeat  
all the files in the current folder being played.  
To cancel, press button [5] again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
How to operate the MP3 player  
[DISP] button  
Buttons [5] and [6]  
Playing files in random order (RANDOM)  
Press button [6].  
1
Press the button briefly to randomly play the files in the current  
folder being played.  
Pressing the button until [ALL RANDOM] is displayed will  
randomly play the files in all the folders.  
To cancel, press button [6] again.  
•Doing random playback, press button [5] to repeat the file  
being played. To cancel repeat play (go back to random play),  
ATTENTION  
press button [5] again.  
During playback of a particular file: The file being played is  
played repeatedly.  
While searching: The following file is played repeatedly.  
•Occasionally the same file happens to be played (selected) two  
or more times in a row; this is normal operation and is no sign of  
a problem.  
Displaying title  
Press the [DISP] button.  
1
Each time the button is pressed the following will be displayed  
in order.  
Elapsed Time Folder Name/File Name*1 Tag*2 Clock  
*1: The display area shows a maximum of 10 characters and  
then scrolls to display the remaining characters.  
After the folder name is displayed, the file name will be  
displayed by scrolling. After the file name is scrolled, the  
display will be fixed.  
*2: If there is no tag data, "NO TAG" will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
How to operate the tuner  
How to operate the tuner  
[SEEK ] button  
[SEL]  
button  
[FM AM] button  
[FAST ] button  
First, press the [FM AM] button to start tuner operation.  
There are automatic and manual methods for setting stations in  
memory. The receiver will accept up to 24 stations in memory: six in  
AM and 18 in FM (6 each for FM1, FM2 and FM3.) (Initial setting)  
Tuning to a station  
Press the [FM AM] button to switch to the desired FM or  
AM bands.  
1
Radio bands will switch from FM1 FM2 FM3 AM in  
order each time the button is pressed.  
Turn the [SEL] button to the left or right to tune to a  
station.  
2
Turn to the right: Tunes to higher frequencies.  
Turn to the left: Tunes to lower frequencies.  
Press the [SEEK /FAST ] button to start the automatic  
station search.  
3
[SEEK ] button: Starts searching toward higher frequencies.  
[FAST ] button: Starts searching toward lower frequencies.  
At times, it may be difficult to maintain optimum reception  
because the antenna affixed to your vehicle is in motion  
ATTENTION  
constantly (relative to the broadcast antenna), encountering  
continuous variation in the received radio signals’ strength. Other  
factors affecting reception include interference from natural  
obstacles, sign posts, etc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
How to operate the tuner  
Buttons [1] to [6]  
[SEL]  
button  
[FM AM] button  
Entering stations into memory automatically  
(The automatic preset mode: ASM)  
Press the [FM AM] button to switch to the desired FM or  
AM bands.  
1
Radio bands will switch from FM1 FM2 FM3 AM in  
order each time the button is pressed.  
Press the [SEL] button for more than two seconds until a  
beep is heard.  
2
The automatic preset mode starts.  
The [ASM ON] indicator on the screen flashes, and stations are  
automatically entered in memory under buttons [1] to [6].  
These buttons are called preset buttons.  
•Press any numbered button to select the station whose  
frequency is indicated right above the button.  
ATTENTION  
•When a new station is set in memory, the station previously set  
in memory will be deleted.  
•If there are fewer than six receivable stations, the stations set in  
the remaining buttons will be retained.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
How to operate the tuner  
Buttons [1] to [6]  
[SEL]  
button  
[FM AM] button  
Manually setting stations into memory  
This section covers the setting of stations in memory under the  
numbered buttons.  
Press the [FM AM] button to switch between FM and AM.  
1
Turn the [SEL] button to the right or left to tune to the  
station to be entered in memory.  
2
Select any button, from [1] to [6], and press it for more  
than two seconds.  
3
The tuned station is now memorized and set in the button  
selected. Repeat the procedure to set additional manually  
tuned stations in memory, in turn, for buttons [1] to [6]. These  
buttons are called the preset buttons.  
If the vehicle’s battery is disconnected (for repairs to the vehicle  
or for removing the receiver), all stations in memory will be lost.  
Caution  
In such a case, set stations in memory again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
How to operate the tuner  
Buttons [1] to [6]  
[SEL]  
button  
[FM AM] button  
Preset station scan  
This function enables reception of all the stations in the preset  
buttons for five seconds each.  
Press the [SEL] button for less than one second.  
1
[P SCAN] will appear at the top of the display, and stations  
stored under preset buttons [1] through [6] will be played for  
five seconds each.  
To stop the preset scan mode at a desired station, press  
the [SEL] button again.  
2
The receiver will stay tuned to the desired station.  
Switching the display  
Press the [DISP] button.  
1
Each press of the button switches the display the clock and  
current frequency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
How to operate the tuner  
Button [1]  
[FM AM] button  
Button [3]  
Changing the reception sensitivity for automatic scanning  
The deck lets you select the reception sensitivity to be used for  
automatic scanning of stations. The two sensitivity modes available  
for this deck are AUTO mode and DX mode.  
During automatic scanning, the reception sensitivity  
switches automatically to one of two levels. Initially the  
reception sensitivity is set to the low level so that only  
stations with strong signals are received. If no stations  
could be received, the reception sensitivity is increased  
so that stations with weaker signals can also be  
received.  
AUTO Mode  
DX Mode  
Because the reception sensitivity for automatic scanning  
is set to the high level from the start, even stations with  
weaker signals can be received. (Signal crossover may  
result in some stations being hard to hear.)  
Check that the deck is in standby mode.  
1
2
Press and hold the button [1], then [FM AM] button, and  
hold both for more than three seconds.  
The mode switches between AUTO mode and DX mode each  
time the buttons are pressed.  
Changing the radio band location  
You can switch the location for the radio bands used between the  
North American region and the Asia/Australia region. The default  
setting is USA (North America).  
Check that the deck is in standby mode.  
1
2
Press and hold the button [3], then [FM AM] button, and  
hold both for more than three seconds.  
The radio band switches between USA and OTHERS each time  
the buttons are pressed.  
After changing the location, the power will turn on in FM1  
mode. After this, the broadcast stations will be searched for  
automatically and stored in buttons [1] to [6].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
How to operate the tuner  
FM reception characteristics  
In general, FM has much better tonal quality than AM. However, FM  
and FM stereo reception encounter several characteristic problems  
not encountered with AM. FM is more difficult to receive than AM in a  
moving vehicle. The following are explanatory notes on what to  
expect from FM reception and on how to get satisfactory  
performance.  
FM reception differs from AM  
A characteristic of transmitted signals is that lower frequencies  
travel further. FM frequencies are much higher than AM’s  
(similar to a ray of light): they won’t bend but they will reflect.  
Often, they will be interrupted by tall buildings, mountains, etc.,  
taking direct and indirect paths to your vehicle’s antenna. The  
distance at which FM stations can be received satisfactorily is  
usually not nearly as far as that which AM stations can be  
received.  
AM Radio Waves  
Ionosphere  
FM Radio Waves  
Ionosphere  
Fading out  
In weak signal or “fringe” reception areas, FM stations may  
fade out completely, or fade in and out. When driving in weak  
signal areas, such as near hills, through valleys or tunnels,  
among tall buildings, etc., you may encounter unusual noise  
interference. THIS IS NOT A TUNER PROBLEM. In this case,  
you can only wait until you are in a better reception area, tune  
to a stronger station, or reduce the treble level.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
How to operate the tuner  
Reception area of FM broadcasts  
A home receiver can catch weak FM stereo signals through the  
use of a tall, directional or ultra-sensitive antenna. In a moving  
vehicle, the area for good reception is limited because of  
varying conditions encountered while driving, including the  
types and heights of broadcast antenna structures, signal  
strength, engine noise, etc. For best reception with manual  
antenna, extend the antenna mast as far as possible.  
Transmitting Antenna 100 Meters High  
Effective Radiation Power 1kW  
FM Stereo Auto Radio 12.4 miles  
FM Monaural Auto Radio 31 miles  
Home FM Stereo Receiver 62 miles  
Reception quality varies depending on the power of the FM  
station, natural and artificial barriers,weather conditions, etc.  
Multipath  
The reflection characteristics of FM waves cause another  
problem called multipathFM wave signals reflecting off of  
buildings, mountains, etc. When the antenna receives direct  
and reflected waves at the same time, distortion of sound in the  
treble range often occurs, such as static or harsh-sounding  
voices. THIS IS NOT A TUNER PROBLEM. Only moving to  
another area with a clearer signal path can remedy the  
situation.  
DIRECT  
WAVE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
How to use a Card remote control  
How to use a Card remote control  
Precautions in use of the remote control  
• Be careful when handling the control, especially because it is  
small and light. Dropping or striking it hard may damage it,  
wear out the battery or cause a malfunction.  
• Keep the remote control free of moisture, dust and water. Do  
not subject it to shock.  
• Do not place the remote control unit where it will get hot, such  
as on the dashboard or near a heater vent. Allowing the  
remote control unit to overheat may warp its case or cause  
other problems.  
• Do not operate the remote control unit while driving because  
doing so could cause an accident.  
• When using the remote control, point it directly at the remote  
control light receptor.  
• The light receptor may not operate correctly if it is exposed to  
bright light such as direct sunlight.  
• Be sure to press the [PWR] button on the main unit for more  
than two seconds to shut it down before leaving the car, or the  
car battery may be run down. When the main unit is shut down,  
the remote control will not work.  
• Remove the batteries from the remote control unit whenever it  
is not to be used for a long time.  
Cleaning the remote control  
• Use a dry cloth to keep the unit clean. If the remote control unit  
gets extremely dirty, clean it with a cloth moistened in dilute  
liquid detergent. Do not use alcohol or thinner; these  
compounds may damage the finish.  
• In no event should benzine or thinner be used. These  
substances will damage the case or finish.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
How to use a Card remote control  
[PWR]  
button  
Remote-control  
light receptor  
[+] button  
] button  
[MUTE]  
button  
[
-
Turning the power on/off  
When the power is turned on, the state used when the power was  
turned off such as CD and tuner playing is restored.  
Press the [PWR] button.  
1
The power turns on or off each time the button is pressed.  
When the main unit is shut down, the remote control will not work.  
ATTENTION  
Adjusting the audio volume  
Press the [+] or [-] button.  
1
[+] button: Increases the volume.  
] button: Decreases the volume.  
[
-
Cutting the volume instantly (muting)  
Press the [MUTE] button to cut the volume or restore it  
instantly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
How to use a Card remote control  
[MODE] button  
[BAND] button  
Switching playback modes  
Press the [MODE] button.  
1
Press the button to switch modes in the following sequence:  
Tuner  
Disc  
How to play the tuner  
Select the tuner mode first.  
Selecting the FM/AM band  
Press the [BAND] button.  
1
Each press will switch tuner modes from FM1 FM2 ➔  
FM3 AM.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
How to use a Card remote control  
[BAND] button  
[
[
TUNE SEEK ] buttons  
PRESET CH ] buttons  
Selecting a station (manually or automatically)  
A short tap of the button will allow manual station tuning.  
Pressing for more than one second will start automatic tuning.  
Press the [ TUNE•SEEK ] button.  
1
[
[
] button: Tunes to higher frequency stations.  
] button: Tunes to lower frequency stations.  
Selecting preset stations  
A total of six stations may be selected (preset tuning) out of  
those already set in memory through the main unit. (Refer to  
Manually setting stations into memory,page 43.)  
Press the [ PRESET CH ] button.  
1
[
[
] button: Select the next higher number preset button.  
] button: Select the next lower number preset button.  
How to play CDs  
Select the disc mode first.  
Switching disc mode  
Press the [BAND] button.  
1
When one or two CD changers are connected, press the  
[BAND] button to change modes from CD player CD  
changer 1 CD changer 2.  
The indicator will skip a changer or player that has no discs  
loaded.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
How to use a Card remote control  
[
TRACK APS ] buttons  
[
DISC ] buttons  
Advancing to the next track or returning to  
the beginning of the track being played  
Press the [ TRACKAPS ] button.  
1
[
[
] button: Skips to the next track.  
] button: Returns to the beginning of the track being  
played. (Press repeatedly to move to previous  
tracks.)  
Hold the [ ] button down to fast forward, or the [ ] button to  
rewind through the track being played.  
ATTENTION  
Skipping to the next or previous disc  
Press the [ DISC ] button.  
1
[
[
] button: Selects the next higher number disc.  
] button: Selects the next lower number disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
How to use a Card remote control  
Replacing the battery  
To prevent accidents, store batteries out of the reach of  
children. If a child has swallowed one, consult a doctor  
immediately.  
Warning  
Use one CR2025 battery.  
On the back of the remote control, while pressing the  
locking knob on the battery slot cover toward your right,  
pull out the battery carrier with your fingernail.  
1
Unlock  
Remove the old battery, then place the new one in the  
carrier with the (+) mark facing up.  
2
Push in the carrier until it snaps into place.  
3
Be extremely careful not to swallow the battery.  
Caution  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
How to use an optional NOB remote control  
How to use an optional NOB remote control  
[AUDIO  
CONTROL]  
button  
Remote-control  
light receptor  
BAND  
MODE  
TRACK  
TUNE SEEK  
DISC  
[MUTE]  
button  
[PWR] button  
E-COM  
MUTE  
PWR  
ILLUMI  
Turning the power on/off  
When the power is turned on, the state used when the power was  
turned off such as CD and tuner playing is restored.  
Press the [PWR] button.  
1
The power turns on or off each time the button is pressed.  
When the main unit is shut down, the remote control will not work.  
ATTENTION  
Adjusting the audio volume  
Press the [AUDIO CONTROL] button, and turn it to the  
left or right.  
1
Each press of the button will switch the audio control modes.  
Turn to the right: Increases the volume.  
Turn to the left: Decreases the volume.  
Cutting the volume instantly (muting)  
Press the [MUTE] button to cut the volume or restore it  
instantly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
How to use an optional NOB remote control  
BAND  
MODE  
[BAND] button  
[MODE] button  
TRACK  
TUNE SEEK  
DISC  
E-COM  
MUTE  
PWR  
ILLUMI  
Switching playback modes  
Press the [MODE] button.  
1
Press the button to switch modes in the following sequence:  
Tuner  
Disc  
How to play the tuner  
Select the tuner mode first.  
Selecting the FM/AM band  
Press the [BAND] button.  
1
Each press will switch tuner modes from FM1 FM2 ➔  
FM3 AM.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
How to use an optional NOB remote control  
BAND  
MODE  
[BAND] button  
TUNE SEEK ] buttons  
TRACK  
TUNE SEEK  
DISC  
[
[
DISC ] buttons  
E-COM  
MUTE  
PWR  
ILLUMI  
Selecting a station (manually or automatically)  
A short tap of the button will allow manual station tuning.  
Pressing for more than one second will start automatic tuning.  
Press the [ TUNESEEK ] button.  
1
[
[
] button: Tunes to higher frequency stations.  
] button: Tunes to lower frequency stations.  
Selecting preset stations  
A total of six stations may be selected (preset tuning) out of  
those already set in memory through the main unit. (Refer to  
Manually setting stations into memory,page 43.)  
Press the [ DISC ] button.  
1
[
[
] button: Selects the next higher number preset button.  
] button: Selects the next lower number preset button.  
How to play CDs  
Select the disc mode first.  
Switching disc mode  
Press the [BAND] button.  
1
When one or two CD changers are connected, press the  
[BAND] button to change modes from CD player CD  
changer 1 CD changer 2.  
The indicator will skip a changer or player that has no discs  
loaded.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56  
How to use an optional NOB remote control  
BAND  
MODE  
TRACK  
TUNE SEEK  
DISC  
[
TRACK ] buttons  
[
DISC ] buttons  
E-COM  
MUTE  
PWR  
ILLUMI  
Advancing to the next track or returning to the  
beginning of the track being played  
Press the [ TRACK ] button.  
1
[
[
] button: Skips to the next track.  
] button: Returns to the beginning of the track being  
played. (Press repeatedly to move to previous  
tracks.)  
Hold the [ ] button down to fast forward, or the [ ] button to  
rewind through the track being played.  
ATTENTION  
Skipping to the next or previous disc  
Press the[ DISC ] button.  
1
[
[
] button: Selects the next higher number disc.  
] button: Selects the next lower number disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
How to use an optional NOB remote control  
Replacing the battery  
To prevent accidents, store batteries out of the reach of children.  
If a child has swallowed one, consult a doctor immediately.  
Warning  
Use two AA-size batteries.  
Remove the back cover of the remote control unit by  
gently pressing and sliding it in the direction indicated by  
the arrow.  
1
Install the two batteries provided into the compartment  
as illustrated inside the compartment.  
2
Return the back cover into place by sliding it in the  
direction indicated by the arrow.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
How to use an optional NOB remote control  
Be extremely careful not to swallow the battery.  
The battery life is approximately one year. If the remote control  
unit does not operate correctly or if the button lamp gets dim,  
replace the batteries.  
Caution  
Be sure to orient the batteries correctly so that the positive and  
negative poles match the diagram.  
Do not use one new battery and one old one; use two new  
batteries.  
Use only two of the same kind of battery.  
If any liquid is seen leaking from the batteries, remove both  
batteries and dispose of them properly. Thoroughly clean the  
battery compartment with a dry cloth. Then install new  
batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
How to operate the receiver with an optional CD changer connected  
How to operate the receiver with an  
optional CD changer connected  
[DISC] button  
[SEEK ] button  
[SEL]  
button  
[FAST ] button  
Listening to a CD  
This section covers the operation of an optional CD changer that is  
connected to the receiver.  
To switch from another mode, press the [DISC] button.  
Press the [DISC] button.  
1
Each press of the button switches the mode from CD Player ➔  
CD Changer 1 CD Changer 2.  
Advancing to the next track or returning to  
the beginning of the track being played  
Turn the [SEL] button to the left or right.  
1
Turn to the right: Advances to the next track.  
Turn to the left: Returns to the beginning of the track being  
played. (Repeat turning for previous tracks.)  
Fast Forward/Rewind  
Fast forward or rewind the song currently being played.  
Press and hold the [SEEK ] or [FAST ] button.  
1
[SEEK ] button: Fast forward.  
[FAST ] button: Rewind.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
How to operate the receiver with an optional CD changer connected  
Buttons [4] and [5]  
Playing the beginning of tracks (SCAN)  
Press button [4].  
1
Tapping the button causes the changer to move up to the next  
track and play it for 10 seconds, then move up to the next  
track and play it for 10 seconds, and so on, on one CD, until  
the button is tapped again.  
Hold the button until the [ALL SCAN] display appears to play  
the first 10 seconds of the first track of every CD loaded.  
To continue playing a desired track, press the button again to  
stop scanning.  
ATTENTION  
After the entire disc is scanned once, ordinary playback starts  
from the point where scanning started.  
Repeating the same track (REPEAT)  
Press button [5].  
1
Tapping on the button causes the changer to repeat the track  
currently being played, until the button is tapped again.  
Hold the button until the [ALL RPT] display appears to repeat  
all tracks on the CD being played.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
61  
How to operate the receiver with an optional CD changer connected  
Buttons [1] and [2]  
Buttons [5] and [6]  
Playing tracks in random order (RANDOM)  
Press button [6].  
1
Tapping on the button causes the changer to play the tracks  
on the currently playing CD in random order, until the button is  
pressed again.  
Hold the button until the [ALL RAND] display appears to play  
tracks from all of CDs loaded in the currently selected  
changer, in random order.  
Doing random playback, press button [5] to repeat the track  
being played. To cancel repeat play (go back to random play),  
ATTENTION  
press button [5] again.  
During playback of a particular track: The track being played is  
played repeatedly.  
While searching: The following track is played repeatedly.  
Occasionally the same track happens to be played (selected)  
two or more times in a row, but it is no sign of a problem.  
When any of the functions - Playing the beginning of tracks,”  
Repeating the same trackand Playing tracks in random  
order- is selected, a message such as [SCAN], [ALL SCAN],  
[REPEAT], [ALL RPT], [RANDOM] or [ALL RAND] appears on  
the display to verify the current function.  
Random play is not canceled even if a magazine is ejected.  
Skipping to the next or previous CD  
Press button [1] or [2].  
1
Button [1]: Selects the next higher number disc.  
Button [2]: Selects the next lower number disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
How to operate the receiver with an optional CD changer connected  
Buttons [1] to [6]  
[DISP] button  
[SEL]  
button  
Specifying a CD to play  
A CD of your choice is directly selectable out of the loaded discs.  
Press the [SEL] button.  
1
Press a button from [1] to [6].  
2
Buttons  
CD  
1
1
7
2
2
8
3
3
9
4
4
5
5
6
6
10 11 12  
To select a CD from nos. 7 to 12, press the desired button  
considerably longer.  
Switching the display  
Press the [DISP] button.  
1
Each press of button switches the display track No./elapsed  
time and clock.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63  
If you have a question:  
If you have a question:  
[RESET] button  
First check the items mentioned below before attempting to  
troubleshoot problems.  
If a problem occurs, for instance when the unit does not respond  
to any button presses, or the display doesn't work correctly,  
Caution  
press the [RESET] button using a sharp tool.  
Pressing the [RESET] button will delete all the entries from  
memory. The settings will return to those made at the factory  
prior to shipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64  
If you have a question:  
Displayed information (for troubleshooting)  
The information listed in the chart below is displayed to show the  
status of the CD player and CD changer. Refer to the chart for the  
appropriate action.  
Information Code Table  
When "INFO " flashes on the indicator  
Nos.2~7 are displayed.  
Information Contents  
Explanation and remedial action to take  
2
3
5
NO DISC LOADED IN  
THE MAGAZINE  
There is no disc in the magazine or player. Load  
a disc in the magazine. (Load a music disc.)  
DISCS ARE DIRTY OR  
DAMAGED  
The loaded disc is dirty or upside down. Check  
it for proper orientation and verify it is clean.  
CD PLAYER AND CD  
CHANGER FAILS  
MECHANICALLY  
The CD player and CD changer is inoperative for  
some reason. Go through the magazine removal  
procedure.  
If a magazine fails to eject, have your dealer fix  
the problem.  
6
7
WHEN THE CD CHANGER  
INTERNAL TEMPERATURE IS operation. Wait till it cools down.  
HIGH (TO PROTECT PICKUP Resume playing after the High temperature sensed  
UNIT)  
The temperature in the CD changer is too high for  
and CD stopped" display disappears. If the CD still  
cannot play, have your dealer repair it.  
AN INTERNAL POWER  
SUPPLY FAILURE IS  
Turn the ACC off once before turning it on once  
again to resume the operation.  
OCCURRING WITH THE If the function still cannot be restricted, contact your  
AUTO CHANGER  
dealer.  
Information Contents  
LOAD  
Explanation and remedial action to take  
CD changer is in the process of verifying the  
presence of CDs after a magazine has been inserted  
into the CD changer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
65  
If you have a question:  
Remedial action  
to take  
Refer  
Mode  
Problem  
Causes  
to page  
Is the volume control up sufficiently?  
Turn up the volume control.  
24  
Readjust the fader and  
balance controls to more  
normal positions.  
Is the fader or balance control set  
far to one side?  
25  
Dead or  
weak sound  
Other probable causes include  
broken audio-signal wiring or a  
faulty speaker.  
Have your dealer check  
the problem.  
Are too many electrical items  
installed, causing a lack of power?  
Have your dealer check  
the problem.  
Power does  
not turn on.  
Other probable causes include a  
run-down car battery, broken power  
or interconnection wiring.  
Have your dealer check  
the problem.  
Has the car battery been disconnected  
for repair or checked out?  
Reenter them into  
memory.  
42,  
43  
Common Frequencies Are too many electrical items  
Have your dealer check  
the problem.  
to all  
or titles set in installed and causing lack of  
memory are available power?  
deleted.  
Other probable causes include  
run-down car battery, broken power  
or interconnection wiring.  
Have your dealer check  
the problem.  
No guide  
Is the guide tone disabled?  
tone sounds.  
Enable the guide tone.  
Replace battery.  
28  
53,  
58  
Is the battery low?  
Is the battery installed in reverse  
polarity?  
Reinstall the battery in the  
correct polarity.  
53,  
58  
The remote  
control does  
not work.  
Is direct sunlight hitting the remote  
control light receptor?  
Use the remote control  
close to the receptor.  
Other probable causes include a  
malfunctioning remote control.  
Have your dealer check  
the problem.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66  
If you have a question:  
Remedial action  
Refer  
Mode  
Problem  
Causes  
to take  
to page  
Is an extra label or seal  
applied to the disc?  
Do not apply labels or seals  
to the disc.  
The disc cannot be inserted.  
The disc is ejected as soon  
as it is inserted.  
12  
Are there rough edges,  
deformations or  
damaged areas on the  
disc?  
Try inserting another disc.  
Removed any burrs.  
Do not use a deformed or  
damaged disc.  
Or, the disc cannot be  
ejected.  
The disc cannot be  
changed.  
13  
Is the disc damaged?  
(scratched, warped, etc.) play a damaged disc.  
Try another disc. Do not  
12  
14  
CD  
Is the disc clean?  
Clean the disc.  
Sound skips around.  
Sound is intermittent.  
Sound is bad in quality.  
Is the player mounted at  
a proper angle?  
Is the player mounted  
loosely?  
Have your dealer check it  
out.  
Are you driving over a  
rough surface?  
Avoid playback while  
driving over rough surfaces.  
11  
Press the [DISC] button a  
bit longer (forced Eject).  
The disc cannot be  
ejected.  
If unknown  
Remedial action  
to take  
Refer  
Mode Problem  
Causes  
to page  
Is the antenna retracted?  
Extend the antenna.  
Is the tuner correctly tuned to a  
station?  
Tune to a station.  
41  
41  
Tune to a local station.  
(Please note, there may  
be no local stations  
servicing the area where  
you are currently driving.)  
Receives  
no  
Are you driving outside the service  
area of your preset stations?  
stations,  
or  
Tuner  
receives  
static  
noise.  
Are you operating other equipment  
with a computer, or a mobile phone,  
in your vehicle at the same time as  
your receiver?  
Avoid operating such  
equipment while using  
the receiver.  
Other problems may include a loose Have your authorized  
or disconnected antenna cable, a  
bad antenna cable or a bad  
Eclipse retailer check the  
problem.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
67  
Specifications  
Specifications  
<GENERAL>  
Power Supply  
Current Drain  
14.4V DC (11-16V)  
3A MAX  
Dimensions (W x H x D)  
In-Dash Unit  
Mass (weight)  
7" x 2" x 6-1/5" (178 x 50 x 158mm)  
Approx. 1.4kg  
Usage temperature range  
Storage temperature range  
-20°C to + 65°C (-4°F to 149°F )  
-40°C to + 85°C (-20°F to 185°F )  
<FM TUNER>  
Frequency Range  
USA:  
Asia/Australia:  
Usable Sensitivity  
Frequency Response  
Stereo Separation  
87.75~107.9MHz (0.2MHz step)  
87.5~108MHz (0.05MHz step)  
13dBf  
30~15,000Hz,  
38dB  
3dB  
<AM TUNER>  
Frequency Range  
USA:  
Asia/Australia:  
Usable Sensitivity  
530~1,710kHz (10kHz step)  
522~1,629kHz (9kHz step)  
20µV  
<CD SECTION>  
Frequency Response  
Wow & Flutter  
20~20,000Hz,  
Below measurable limits  
3dB  
Stereo Separation  
S/N Ratio (A-weighted)  
Dynamic Range  
76dB  
90dB  
89dB  
0.02%  
Total Harmonic Distortion  
<AUDIO AMPLIFIER>  
Power Output  
13W x 4 (20~20,000Hz, 0.8% THD,  
4) Max 40W x 4  
Output Level/Impedance  
Tone Action  
2.7V (0dB) /330line-out  
impedance  
Bass  
:
10dB at 100Hz  
10dB at 10kHz  
Treble :  
Loudness  
+9.5dB at 100Hz/+6.0dB at 10kHz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
68  
Before installation  
Before installation  
Note ꢀ  
Be sure to disconnect the vehicle battery's negative terminal  
before installing the receiver.  
Components  
No.  
Item  
Q'ty  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
Main unit  
Mounting sleeve  
Side bracket  
Rear bracket  
Bezel  
Bushing  
Self-tapping screw (6 x 16 mm)  
Stud bolt  
Flat head screw (5 x 8 mm)  
Hex-head bolt (5 x 20 mm)  
Hex nut (5 mm)  
Interconnecting cable  
Remote control  
1
1
2
1
1
1
2
1
4
2
2
1
1
Installation angle  
In order to maintain proper functioning, install the unit within an angle  
of 30 degrees from horizontal (standard). If this is not done, sound  
skipping or ejection of the CD may occur.  
FRONT  
WITHIN AN ANGLE  
OF 30 DEGREES  
STANDARD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
69  
Mounting instruction  
Mounting instruction  
Mounting the main unit  
Insert the mounting sleeve into the opening in the vehicle  
dash board or console box.  
1
Use a screwdriver or the like to bend the tabs in the  
mounting sleeve to secure the mounting sleeve.  
2
BEND THE MOUNTING  
TABS.  
DASH BOARD  
OR CONSOLE BOX  
2 MOUNTING  
SLEEVE  
Attach the side brackets to the main unit using flathead  
screws.  
3
1 MAIN UNIT  
9 FLAT HEAD  
SCREWS [ x 2 ]  
(5 x 8mm)  
3
SIDE BRACKETS [ x 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70  
Mounting instruction  
Mount the stud bolt to the main unit.  
4
5
Insert the main unit into the mounting sleeve until it locks  
in place.  
Fasten the rear of the main unit using either method [A]  
or [B].  
6
Select method [A] or [B] to suit the interior configuration of the  
vehicle.  
Install the bezel on the main unit.  
7
[A]  
METAL OF  
VEHICLE  
DASH BOARD  
OR CONSOLE BOX  
6
BUSHING  
8
STUD BOLT  
2
MOUNTING SLEEVE  
5
BEZEL  
[B]  
7 SELF TAPPING  
11  
NUT (5mm)  
SCREW (6 x 16mm)  
DASH BOARD  
OR CONSOLE BOX  
METAL OF  
VEHICLE  
10  
BOLT  
(5 x 20mm)  
11  
NUT (5mm)  
4
REAR BRACKET  
8
STUD BOLT  
2
MOUNTING SLEEVE  
5
BEZEL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
71  
Mounting instruction  
Names of lead wires and destinations (refer to Page 74)  
Caution ꢀ  
Never connect the power supply to the speaker leads,  
otherwise it cause damage to the main unit.  
Note ꢀ  
To prevent unconnected leads from shorting out, insulate them  
by wrapping their tips with electrical tape. Similarly, insulate the  
ends of connected leads.  
If an external amplifier is to be connected to the receiver, be  
sure to ground its outside housing to the vehicle body (a metal  
part).  
No.  
1
Name  
ACC  
Wire color  
Red  
Destination  
Connect where the power comes on  
when the ignition is in the ACC  
position.  
2
B+  
Yellow  
Black  
Connect where the power is  
constantly available, regardless of the  
ignition switch's position.  
3
4
5
6
Ground  
Connect where good body  
grounding is available.  
Antenna power supply Blue  
Connect to the automatic-antenna  
control terminal of the vehicle.  
Illumination power supply Orange/White  
Control power supply Blue/White  
Connect to where power comes on  
when the headlights are turned on.  
Connect to the control terminal for  
the external amplifier, or to the RCA  
output connectors of a DSP or EQ.  
7
E-LAN terminal  
Connect to the E-LAN terminal of the  
CD changer, DSP, etc.  
8 & 9 Line-out terminals  
Connect to the RCA input connectors  
of an external amplifier.  
10  
Line-out terminals (Nonfader)  
Connect to the RCA input connectors of  
a DSP or EQ, or the RCA connectors of  
a woofer amplifier.  
11  
12  
Speaker leads  
Connect them to their respective  
speaker leads.  
Cellular phone mute  
Pink  
Connect to the ground output  
terminal on a mobile phone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
72  
Mounting instruction  
System  
CD3424  
CD3424  
CH3083  
CD3424  
CH3083  
CH3083  
Download from Www.Somanuals.com. All Manuals Search And Download.  
73  
Mounting instruction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
74  
Mounting instruction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
75  
Mounting instruction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
76  
M e m o  
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
77  
How to contact customer service  
How to contact customer service  
Should the product require service, please contact your nearest  
following Eclipse dealer.  
<U.S.A/CANADA>  
DIVISION OF FUJITSU TEN CORP. OF AMERICA  
19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502  
Phone: (310) 327-2151  
<AUSTRALIA>  
FUJITSU TEN (AUSTRALIA) PTY LTD.  
ECLIPSE AUSTRALIA  
Phone: 1800-211-411  
<MALAYSIA>  
CSE Cobra. Sdn. bhd.  
Level 5, Axis Plaza, Jalan U1/44, Glenmarie, 40150 Shah Alam,  
Selangor D.E., Malaysia.  
Phone: 03-5569-4200  
Fax: 03-5569-4201  
<SINGAPORE>  
CSE Cobra (S) Pte Ltd  
Trademart  
60, Martin Road, # 05-20, Singapore 239065  
Phone: 6737 2568  
Fax : 6737 9538  
Download from Www.Somanuals.com. All Manuals Search And Download.  
78  
How to contact customer service  
<KOREA>  
HYUNDAI AUTONET Co., LTD.  
1st FL. Namhyoung Bldg, 746-23 Yeoksam-Dong, Kangnam-Ku,  
Seoul, Korea 135-080  
Phone: 02-508-6001  
Fax: 02-2-508-6067  
Transpectra Co., Ltd.  
115-16 nonhyun dong kangnam ku Seoul, Korea.  
Phone: 02-540-4595  
Fax: 02-2-540-4666  
<TAIWAN>  
Sentrek Taiwan, LTD.  
1, 9F, Lane 155, Section 3, Peishen RD., Shenkeng, Taipei Hsien,  
222  
Taiwan, R.O.C.  
Phone: 02-2662-8110  
Fax: 02-2662-8117  
<THAILAND>  
Sho-Ten Co., Ltd.  
114/9 Soi Suwansawadi, Thungmahamek, Rama 4 Rd., Sathorn,  
Bangkok 10120, Thailand.  
Phone: 02-671-9610-12  
Fax: 02-671-9614  
Download from Www.Somanuals.com. All Manuals Search And Download.  
79  
M e m o  
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
80  
IMPORTANT  
RECORD YOUR “KEY CD”  
HERE…  
STORE YOUR “KEY CD”  
ALONG WITH YOUR  
OWNER’S MANUAL IN  
YOUR SOCK DRAWER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
81  
CUSTOMER NOTICE  
Please retain this booklet and write in the serial number of your CD3424 for  
identification. The serial number is labeled or stamped on the chassis.  
Serial No.  
FUJITSU TEN LIMITED  
090001-1454A700  
0405 (Y.TS)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

COBY electronic Tablet MID7012 User Manual
Craftsman Lawn Mower 37415 User Manual
Craftsman Lawn Mower YT 4000 User Manual
CyberData Network Router VoIP Multicast Gateway User Manual
Dell All in One Printer 2155CDN User Manual
Dualit Coffeemaker DCM1 User Manual
Dynacord Music Mixer 1000 1600 2200 User Manual
Edelbrock Automobile Parts 1580 User Manual
Freecom Technologies Computer Drive FHD xx User Manual
Garmin All in One Printer NX200 User Manual