Dynex TV Video Accessories DX WD1335 User Manual

ASSEMBLY INSTRUCTIONS

DX-WD1335

Wood TV Stand

Tools needed........................................... 2

Parts ........................................................... 3

Hardware.................................................. 4

Assembly instructions ......................... 5

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Parts

Package contents: parts

Note: Some parts have a label on the edge to help distinguish similar parts from each other. Use this illustration to help

identify similar parts.

Item

Description

Qty.

Item

Description

Right front leg

Qty.

Right end

Left end

Top

Left front leg

Rear leg

Lower shelf

Back

Skirt

Stop molding

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Hardware

Package contents: hardware

Make sure that you have all the hardware necessary to assemble your new TV stand:

Label

Hardware

Qty.

Label

Hardware

Cam cover

Qty.

Twist-lock® fastener

Hidden cam

Glue

Cam dowel

Cam screw

Warning

label

Angle bracket

Black 1-7/8" flat head screw

Black 9/16"

large head

screw

Wood dowel

4in

100mm

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Assembly instructions

Step 1:

Caution: Assemble your TV stand on carpeted floor or on the empty carton to avoid scratching your stand or

the floor.

Push a Twist-lock® fastener (K) into each of the two the holes in the back (E).

Important: Do not tighten the Twist-lock® fasteners in this

step.

You’ll need:

K (2)

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Step 2:

1 Push 13 hidden cams (L) into the ends (A and B), top (C), and back (E). Make sure that the arrows on the hidden

cams (L) are pointing toward the closest edge.

2 Insert the metal end of a cam dowel (M) into each hidden cam, except in the top (C) and short edge of each

end (A and B).

Important: Do not tighten the hidden cams in this step.

Do not insert cam

dowels into this part.

Arrow

Do not insert

cam dowels

into these

edges.

Arrow

Insert the metal

end of the cam

dowel into the

hidden cam.

You’ll need:

L (13)

M (6)

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Step 3:

Screw seven cam screws (N) into the front legs (F and G) and stop molding (J).

You’ll need:

N (7)

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Tightening hidden cams:

In the remaining steps, use these illustrations for instructions on tightening hidden cams.

Warning: Risk of damage or injury. Hidden cams must be completely tightened. Hidden cams that are

not completely tightened will loosen, and parts may separate.

Arrow

Make sure that you turn the

hidden cam a minimum of

190° to a maximum of 210°.

Note the position of the arrow

on the hidden cam.

Arrow

210°

In the illustration below,

the hidden cam has not

been tightened enough.

190°

You’ll need:

Phillips screwdriver

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Step 4:

Align the stop molding (J) with the top (C), then tighten the three hidden cams.

You’ll need:

Phillips screwdriver

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Step 5:

Align the ends (A and B) with the back (E), then tighten the two hidden cams.

Edges with hidden cams

Edge with Twist-lock® fasteners

Edges with hidden cams

You’ll need:

Phillips screwdriver

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Step 6:

Caution: Check the parts carefully before assembling. Disassembly of glued parts is extremely difficult.

1 Fill the holes in the stop molding (J) 1/4 to 1/2 full with glue (R), then insert the wood dowels (P) into the holes.

Wipe away the excess glue.

2 Drop a few beads of glue (R) into the holes in the ends (A and B).

3 Align the ends (A and B) and the back (E) with the top (C) and the stop molding (J). Make sure that the dowels,

Twist-lock® fasteners, and cam dowels align with the correct holes, then tighten the four hidden cams and two

Twist-lock® fasteners.

Note: Wipe away the excess glue with a damp cloth.

To use a Twist-lock®

fastener:

1 Insert the dowel end

of the fastener into the

hole of the adjoining

part.

Note: The dowel end of

the fastener must

remain fully inserted

in the hole of the

Fill the holes 1/4 to

1/2 full with glue.

adjoining part while

locking the fastener.

Dowel end

2 Tighten the fastener

with a Phillips

screwdriver as tight as

possible.

Arrow

Maximum: 210°

Minimum:

190°

You’ll need:

P (2)

R (1)

Phillips screwdriver

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Step 7:

1 Attach two angle brackets (O) to the stop molding (J) using two black 9/16" large head screws (U).

2 Fasten the skirt (I) to the stop molding (J) using two black 9/16" large head screws (U).

Note: There are no pre-drilled holes in the skirt. The screws tighten into the groove.

You’ll need:

O (2)

U (4)

Phillips screwdriver

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Step 8:

1 Align right front leg (F) with the right end (A) and the left front leg (G) with the left end (B), then tighten the four

hidden cams (L).

2 Attach the rear legs (H) to the ends (A and B) using four black 1-7/8" flat head screws (T).

Important: Make sure that the rear legs (H) angle out and away from the stand.

You’ll need:

T (4)

Phillips screwdriver

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Step 9:

Fasten the lower shelf (D) to the ends (A and B) and back (E) using seven black 1-7/8" flat head screws (T).

Long finished edge

You’ll need:

T (7)

Phillips screwdriver

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

DX-WD1335

Step 10:

1 Carefully turn your TV stand upright.

2 Apply the warning label (S) to the top (C) so that the TV will hide the label. Peel off the backing and apply the

label as shown in the diagram.

Note: This is a permanent label intended to last for the life of the product. After you apply the label, do not try to

remove it.

3 Push a cam cover (Q) onto each visible hidden cam.

You’ll need:

Q (6)

S (1)

For customer service, call: 800-305-2204 (U.S./Canada markets)

Need help? Call 800-305-2204

Download from Www.Somanuals.com. All Manuals Search And Download.

Certificate of Conformity

1. This certificate applies to the Sauder Woodworking Product

identified by this instruction booklet.

2. This certificate applies to the compliance of this product with

the CPSC Ban on Lead-Containing Paint (16 CFR 1303).

3. This product was manufactured by:

Sauder Woodworking Company

502 Middle Street

Archbold, Ohio 43502

(419) 446-2711

4. Date of Manufacture: _______________

Lot number: 345399

www.dynexproducts.com (800) 305-2204

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave. South, Richfield, MN 55423 U.S.A.

DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and

brand names are trademarks of their respective owners.

12-0625

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

Coleman Tent 2000005748 User Manual
Cooper Lighting Landscape Lighting GMA25SWWAR User Manual
Creative Digital Camera Webcam Notebook User Manual
Cuisinart Blender DLC 1 User Manual
Curtis GPS Receiver GPD430 User Manual
Dimplex Stove EN55014 User Manual
Dukane Scanner DVP508 User Manual
Dynex Digital Camera DX WC100 User Manual
Electro Voice Automobile Accessories HP940 User Manual
Extron electronic Projector Accessories USFM 100 User Manual