Dynex Flat Panel Television DX 40L261A12 User Manual

Dynex 40” LCD TV  
DX-40L261A12  
USER GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning the TV cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Cleaning the TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Programming universal remote controls . . . . . . . . . . . . . . . . . . . . . .34  
Programming a universal remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
For additional help and information… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Common universal remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
One-year limited warranty - Dynex Televisions . . . . . . . . . . . . . . . .37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
CHILD SAFETY  
It makes a difference how and where you use  
your flat panel display  
As you enjoy your new product, keep these  
safety tips in mind  
The issue  
The home theater entertainment experience is a growing trend, and larger TVs are popular  
purchases. However, TVs are not always supported on the proper stands or installed  
according to the manufacturer’s recommendations. We and the consumer electronics  
industry are committed to making home entertainment enjoyable and safe.  
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,  
chests, or carts may fall over and cause injury.  
Tune into safety  
One size of TV stand does not fit all. Use only a TV stand  
rated for the weight of your TV.  
Carefully read and understand all enclosed instructions for  
proper use of this product.  
Don’t let children climb on or play with entertainment system  
furniture and TVs.  
Don’t place TVs on furniture that can easily be used as  
steps, such as a crate or chest of drawers.  
Remember that children can become excited while watching  
a program, especially on a “larger-than-life” TV. Make sure  
that you place or install the TV where it cannot be pushed,  
pulled over, or knocked down.  
Make sure that you route all cords and cables so that they  
cannot be pulled or grabbed by curious children.  
Wall mounting  
If you decide to wall mount your TV, always remember:  
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your  
TV and that has been recommended by this TV manufacturer, listed in this manual, or  
otherwise listed by an independent laboratory as suitable for your TV.  
Follow all instructions supplied by the TV and wall mount manufacturers.  
If you have any doubts about your ability to safely wall mount your TV, get help from a  
professional installer.  
Make sure that the wall where you are mounting the TV is  
appropriate. Some wall mounts are not designed to be mounted  
to walls backed with steel studs or cinder blocks. If you are  
unsure, ask a professional installer.  
TVs can be heavy. At least two people are required for safe wall mount installation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
DX-40L261A12  
Important safety instructions  
16 An apparatus with three-prong, grounding-type  
plug is a Class I apparatus. A Class I apparatus needs  
to be grounded to prevent possible electric shock.  
Make sure that you connect the Class I apparatus to  
a grounding-type, three-prong outlet.  
17 Remote control batteries should not be exposed to  
excessive heat such as sunshine, fire, or the like.  
18 The apparatus should not be exposed to dripping or  
splashing, and no objects filled with liquids, such as  
vases, should be placed on the apparatus.  
Important safety instructions  
CAUTION  
RISK OF ELECTRIC  
SHOCK  
DO NOT OPEN  
This symbol indicates that dangerous  
voltage constituting a risk of electric  
shock is present within your TV. This  
label is located on the back of your TV.  
Warnings  
Electric shock hazard  
To reduce the risk of fire or electric shock, do not remove any cover or  
expose the device to rain or moisture. No user-serviceable parts are  
inside. Refer servicing to qualified service technicians.  
This symbol indicates that there are  
important operating and maintenance  
instructions in the literature  
accompanying your TV.  
Lightning  
1 Read these instructions.  
2 Keep these instructions.  
3 Heed all warnings.  
4 Follow all instructions.  
5 Do not use this apparatus near water.  
6 Clean only with a dry cloth.  
For added protection for your device receiver during a lightning storm,  
or when it is left unattended and unused for long periods of time,  
unplug it from the power outlet and disconnect any antenna or cable  
system. This helps prevent property damage and personal injury from  
lightning and power line surges.  
Power lines  
7 Do not block any ventilation openings. Install in  
accordance with the manufacturer's instructions.  
8 Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
An outside antenna system should not be located in the vicinity of  
overhead power lines or other electric light or power circuits, or where it  
can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching  
such power lines or circuits as contact with them might be fatal.  
9 Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding  
type plug has two blades and a third grounding  
prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10 Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the  
apparatus.  
Handling the LCD panel  
• Your TV’s screen is made of glass. Do not drop your TV or hit, jolt,  
or press hard against the LCD panel. If the screen breaks, be  
careful of broken glass.  
• If the LCD panel is broken, make absolutely sure that you do not  
touch the liquid in the panel. This may cause skin inflammation.  
• If the liquid gets in your mouth, immediately gargle, rinse, and  
consult with your doctor. Also, if the liquid gets in your eyes or  
touches your skin, consult with your doctor after rinsing for at  
least 15 minutes or longer in clean water.  
Replacement parts  
11 Only use attachments/accessories specified by the  
manufacturer.  
When replacement parts are required, make sure that the service  
technician uses replacement parts specified by the manufacturer that  
have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, personal injury, or other  
hazards.  
12 Use only with a cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the  
apparatus. When a cart is used, use  
caution when moving the  
cart/apparatus combination to avoid injury from  
tip-over.  
Safety check  
After completing any service or repair to this device, ask the service  
technician to perform routine safety checks to determine that your TV is  
in correct operating condition.  
13 Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
14 Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
Power source  
Operate your TV only from the type of power source indicated on the  
marking label. If you are not sure of the type of power supplied to your  
home, consult an electrician or your local power company.  
15 The wall plug is the disconnecting device. The plug  
must remain readily operable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3
Important safety instructions  
DX-40L261A12  
Condensation  
Cautions  
Moisture will form on the TV if the TV is brought from cool surroundings  
into a warm room or if the temperature of the room rises suddenly.  
When this happens, the TV's performance may be impaired. To prevent  
this, let the TV stand in its new surroundings for about an hour before  
switching it on, or make sure that the room temperature rises gradually.  
Condensation may also form during the summer if the TV is exposed to  
the breeze from an air conditioner. In such cases, change the location of  
the TV.  
Damage requiring service  
Unplug this TV from the power outlet and refer servicing to qualified  
service personnel under the following conditions:  
• When the power supply cord or plug is damaged or frayed.  
• If liquid has been spilled or objects have fallen into your TV.  
• If your TV has been exposed to rain or water.  
• If your TV does not operate normally by following the operating  
instructions. Adjust only those controls that are covered by the  
operating instructions because incorrect adjustment of other  
controls may result in damage and will often require extensive  
work by a qualified technician to restore your TV to its normal  
operation.  
Mobile telephone warning  
To avoid interference with your TV picture and sound, operating  
problems, or even damage, keep your cordless and cellular telephones  
away from the TV.  
• If your TV has been dropped or damaged in any way.  
• When your TV exhibits a distinct change in performance.  
End of life directives  
Outdoor antenna grounding  
Your TV contains tin-lead solder and a fluorescent lamp containing a  
small amount of mercury. Disposal of these materials may be regulated  
for environmental reasons. Your TV also contains material that can be  
recycled and reused.  
If an outside antenna or cable system is connected to your TV, make sure  
that the antenna or cable system is grounded to provide some  
protection against voltage surges and built-up static charges. Article  
810 of the National Electrical Code, ANSI/NFPA No. 70, provides  
information with respect to correct grounding of the mast and  
supporting structure, grounding of the lead-in wire to an antenna  
discharge unit, size of grounding conductors, location of the  
antenna-discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode.  
Non-active pixels  
The LCD panel contains almost 3 million thin film transistors, which  
provide exceptionally sharp video quality. Occasionally, a few  
non-active pixels may appear on the screen as a fixed blue, green, or red  
point. These non-active pixels do not adversely affect the performance  
of your TV, and are not considered defects.  
1
2
3
4
5
7
6
Antenna lead-in wire  
Grounding clamp  
1
2
3
4
5
Antenna discharge unit  
Grounding conductors  
Ground clamps  
Power service grounding  
electrode system  
6
7
Electric service equipment  
Note to CATV system installer  
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides  
guidance for correct grounding. Specifically, it states that the cable  
ground must be connected to the grounding system of the building as  
close to the point of cable entry as practical.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
DX-40L261A12  
Installing the stand or wall-mount bracket  
Installing a wall-mount bracket  
Installing the stand or  
wall-mount bracket  
Warning  
This apparatus is intended to be supported by a UL  
Listed wall mount bracket.  
Notes  
If you plan to wall-mount your TV, do not install the  
To attach your TV to a wall-mount bracket:  
stand.  
Store the stand and stand screws in case you decide  
to use the stand in the future.  
1
Carefully place your TV screen face-down on a cushioned, clean  
surface to protect the screen from damages and scratches.  
2
Remove the four screws that secure the base to the stand, then  
remove the base.  
Installing the stand  
To install the stand:  
1
Carefully place your TV screen face-down on a cushioned, clean  
surface to protect the screen from damages and scratches.  
3
Attach the wall-mount bracket to your TV using the mounting  
holes on the back of your TV. See the instructions that came with  
the wall-mount bracket for information about how to correctly  
hang your TV.  
2
Secure the stand to the screen with the four provided screws.  
Model  
DX-40L261A12 M6 type  
Screw type  
Screw length  
12 mm  
Note  
The length of the wall-mount screws vary depending  
on the wall-mount bracket you purchased. See the  
instructions that came with the wall-mount bracket  
for screw lengths.  
15.75 in. (400 mm)  
Wall-mount brackets  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
5
TV components  
DX-40L261A12  
Back  
TV components  
Package contents  
Remote control and batteries (2 AAA)  
Stand with screws  
Composite video cable  
Audio cable  
Power cord  
Quick Setup Guide  
Front  
#
Description  
Connect the supplied power cord here.  
AC IN  
Connect headphones to this jack. For  
more information, see “Connecting  
headphones” on page 15.  
2
3
(headphone)  
Connect an audio amplifier to this jack.  
For more information, see “Using digital  
audio” on page 15.  
DIGITAL OUT  
Connect an antenna or cable TV to this  
jack. For more information, see  
“Connecting an antenna or cable TV (no  
box)” on page 10.  
5
Connect the video for a component  
video device to these jacks. Connect the  
audio to the L and R jacks. For more  
information, see “Using component  
video (better)” on pages 9 or 12.  
#
Item  
Description  
COMPONENT Y/PB/PR  
and L/R Audio IN  
Press to open the on-screen menu. For  
more information, see “Navigating the  
menus” on page 17.  
1
2
MENU  
Connect the video cable from a  
composite video device to the VIDEO  
jack and the audio to the L and R jacks.  
For more information, see “Using  
composite video (good)” on page 9.  
Press to open the Source List, then press  
or to select a video input source.  
In menu mode, press to confirm  
selections.  
6
7
AV IN  
INPUT  
Connect the video (VGA) for a computer  
to this jack. For more information, see  
“Using VGA” on page 14.  
Press to increase or decrease the  
volume.  
3
4
VOLUME+/VOLUME–  
PC IN VGA  
Press to go to the next or previous  
channel in the channel list. For more  
information, see “Selecting a channel”  
on page 17.  
Connect the audio for a computer or a  
DVI device to this jack. For more  
information, see “Using VGA” on page  
14 or “Using DVI (same as HDMI but  
requires an audio connection)” on  
pages 8 or 11.  
CHANNEL /  
CHANNEL ꢁ  
8
PC IN AUDIO  
Press to turn your TV on or off (Standby  
mode). When your TV is off, power still  
flows into it. To disconnect power,  
unplug the power cord.  
5
6
(power)  
Connect HDMI devices to these jacks.  
An HDMI cable carries both video and  
sound. You do not need to make an  
audio connection for an HDMI device.  
Receives the signals from the remote  
control. Do not block.  
Remote sensor  
9
For more information, see “Using HDMI  
(best)” on pages 8, 11, or 14.  
When connecting a DVI device using an  
HDMI-DVI adapter, connect the device  
to the HDMI1 jack.  
HDMI1/HDMI2  
Service port  
Turns off when your TV is turned on.  
Lights red when your TV is in standby  
mode.  
Flashes red when your TV receives no  
signal from VGA and enters DPMS  
mode.  
Turns off when power cord is  
unplugged.  
7
Power indicator  
For software update only. Do not use.  
10  
For more information, see “Turning your  
TV on or off” on page 16.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
6
DX-40L261A12  
TV components  
Remote control  
#
Button  
Description  
Press to select the aspect ratio. For more  
information, see “Adjusting the TV picture”  
on page 18.  
9
ZOOM  
Press to select the video modes. You can  
select Vivid, Standard, Energy Savings,  
Theater, Sports, or Custom. For more  
information, see “Adjusting the TV picture”  
on page 18.  
10  
PICTURE  
Press to set the sleep timer. You can select  
Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240  
minutes. For more information, see “Setting  
the sleep timer” on page 28.  
11  
12  
SLEEP  
AUDIO  
Press to select the sound mode. For more  
information, see “Adjusting sound settings”  
on page 19.  
Press to turn your TV on or off (Standby  
mode). When your TV is off, power still flows  
into it. To disconnect power, unplug the  
power cord.  
13  
(power)  
In TV mode, press to return to the previous  
channel.  
14 RECALL  
Press to display the program guide. For more  
information, see “Viewing channel  
information” on page 18.  
15  
GUIDE  
Press to move left, right, up, or down in  
on-screen menus.  
16 ꢀ ꢁ ꢂ ꢃ  
17 EXIT  
Press to close the on-screen menu.  
Press to change TV channels to the next  
higher or next lower channel. For more  
information, see “Selecting a channel” on  
page 17.  
19 FAVORITE  
Press to open the Favorite Channel list. For  
more information, see “Setting up a favorite  
channel list” on page 20 and “Viewing a  
favorite channel” on page 21.  
TV—Press to control your TV.  
COMP—Press to select the device  
connected to the COMPONENT video jacks.  
VIDEO--Press to select the device connected  
to the AV IN video jack.  
HDMI—Press one or more times to select  
the device connected to the HDMI 1 or  
HDMI 2 jack.  
#
Button  
INPUT  
Description  
VGA—Press to select the device connected  
to the PC IN VGA jack.  
Press to open the Source List, then press ꢀ  
or to cycle through the available input  
sources. For more information, see  
“Selecting the video input source” on  
page 16.  
1
Press to open the channel list.  
21 CH-LIST  
Press to turn closed captioning on or off. You  
can select CC Off, CC On, or CC On when  
Mute. For more information, see “Using  
closed captioning” on page 25.  
Press to enter channel numbers and the  
parental control password.  
22  
CCD  
2
3
Numbers  
Press to enter a digital sub-channel number.  
For more information, see “Selecting a  
channel” on page 17.  
Press to select the audio mode for an analog  
program. You can select:  
MONO—Select this option if there is  
noise or static on weak stereo  
broadcasts.  
STEREO—Select this option for  
programs broadcast in stereo.  
Press to display TV status information, such  
as the channel number, channel name (if  
available), or signal source. For more  
information, see “Viewing channel  
information” on page 18.  
23 MTS/SAP  
4
INFO  
Press to confirm selections or changes.  
Press to open the on-screen menu.  
Press to increase or decrease the volume.  
5
6
7
ENTER  
MENU  
VOL +/VOL –  
Press to mute the sound. Press again to  
restore the sound.  
8
MUTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7
Making connections  
DX-40L261A12  
Making connections  
Connection type  
and jack  
Cable connectors  
What connection should I use?  
Your TV has several connection types for connecting devices to your TV.  
For the best video quality, you should connect a device to the best  
available connection.  
Digital coaxial  
audio  
Use the following tables to identify cables:  
Connection type  
Video quality Cable connector  
and jack  
Analog audio  
HDMI  
Best (use this  
video/audio  
if your devices  
have HDMI)  
VGA (computer)  
video and audio  
Component  
video (requires  
an audio  
Better than  
S-Video,  
composite, or  
coaxial  
connection)  
You can use an HDMI jack to connect a DVI device to your TV. You need  
to attach an HDMI-to-DVI adapter to the end of the HDMI cable that  
connects to the DVI device.  
Compositevideo  
(requires an  
audio  
Better than  
coaxial  
connection)  
Cautions  
Check the jacks for position and type before  
making any connections.  
Loose connections can result in image or color  
problems. Make sure that all connections are  
tight and secure.  
The external audio/video equipment shown  
may be different from your equipment. If you  
have questions, refer to the documentation that  
came with your equipment.  
Always unplug the power cord when  
connecting external equipment.  
Coaxial  
video/audio  
Good  
Connecting power  
To connect the power:  
• Connect the AC power cord to the AC connector on the back of  
your TV, then plug the other end into a power outlet.  
Notes  
Your TV should only be operated from the  
power source indicated on the label.  
Always unplug the AC power cord from the  
power outlet when you will not be using your  
TV for an extended period of time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
8
DX-40L261A12  
Making connections  
Using DVI (same as HDMI but requires an audio connection)  
Connecting a cable or satellite box  
To connect a cable or satellite box using DVI:  
Many cable or satellite TV boxes have more than one connection type.  
To get the best video, you should use the best connection type  
available. For more information, see “What connection should I use?”  
on page 7.  
1
2
Turn off your TV and all connected equipment.  
Connect the incoming cable from the cable wall jack to the  
cable-in jack on the cable box.  
3
4
Connect an HDMI-DVI adapter (not included) to one end of an  
HDMI cable (not included).  
Connect the HDMI-DVI adapter to the HDMI 1 jack on the side of  
your TV and to the DVI OUT jack on the cable or satellite box.  
Using HDMI (best)  
To connect a cable or satellite box using HDMI:  
1
2
Turn off your TV and all connected equipment.  
Connect the incoming cable from the cable wall jack to the  
cable-in jack on the cable box.  
Cable or satellite box  
3
Connect an HDMI cable (not included) to one of the HDMI jacks  
on the side of your TV and to the HDMI OUT jack on the cable or  
satellite box.  
To Cable-in jack on the  
cable TV or satellite box  
Cable or  
satellite box  
From cable TV  
wall jack (75 ohm)  
From cable TV  
wall jack (75 ohm)  
To Cable-in jack on the  
cable TV or satellite box  
Side of TV  
HDMI cable  
Side of TV  
5
Connect a 3.5 mm audio cable (not included) to the PC/DVI  
AUDIO IN jack on the side of your TV and to the AUDIO OUT jacks  
on the cable or satellite box.  
4
5
Turn on your TV, then turn on the cable or satellite box.  
Go through the setup wizard on page 16.  
Note  
When you connect the audio using the PC/DVI  
AUDIO IN jack, the audio output is analog.  
Notes  
An HDMI cable carries both audio and video. You do  
not need to use any audio cables.  
6
7
Turn on your TV, then turn on the cable or satellite box.  
Go through the setup wizard on page 16.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
9
Making connections  
DX-40L261A12  
Using component video (better)  
Using composite video (good)  
To connect a cable or satellite box using component video:  
To connect a cable or satellite box using composite video:  
1
2
Turn off your TV and all connected equipment.  
Connect the incoming cable from the cable wall jack to the  
cable-in jack on the cable box.  
1
2
Turn off your TV and all connected equipment.  
Connect the incoming cable from the cable wall jack to the  
cable-in jack on the cable box.  
3
Connect a component video cable (not included) to the Y, PB, and  
PR jacks on the back of your TV and the component video out  
jacks on the cable or satellite box.  
3
Connect an A/V cable (included) to the AV IN jacks on the back of  
your TV and to the composite video and audio out jacks on the  
cable or satellite box.  
From cable TV  
To Cable-in jack on the  
Cable or satellite box  
Cable or  
wall jack (75 ohm)  
cable TV or satellite box  
satellite box  
From cable TV  
wall jack (75 ohm)  
To Cable-in jack on the  
cable TV or satellite box  
A/V cable  
Back of TV  
Audio cable  
Back of TV  
Cables are often  
color-coded to match  
color-coded jacks.  
COMPONENT IN  
COMPONENT IN  
4
5
Turn on your TV, then turn on the cable or satellite box.  
Go through the setup wizard on page 16.  
Component video cable  
4
Connect an audio cable (not included) to the L and R audio jacks  
on the back of your TV and to the audio out jack on the cable or  
satellite TV box.  
Note  
When you connect the audio using the L and R audio  
jacks, the audio output is analog.  
Your TV has a digital audio jack, so you can connect  
the video to the component video jacks and connect  
the audio to the digital audio jack to get digital audio  
output.  
5
6
Turn on your TV, then turn on the cable or satellite box.  
Go through the setup wizard on page 16.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
10  
DX-40L261A12  
Making connections  
Using coaxial (good)  
Connecting an antenna or cable TV (no  
box)  
To connect a cable or satellite box using coaxial:  
1
2
Turn off your TV and all connected equipment.  
Connect the incoming cable from the cable wall jack to the  
cable-in jack on the cable or satellite box.  
To connect an antenna or cable TV (no box):  
1
2
Turn off your TV and all connected equipment.  
Connect a coaxial cable to the ANT/CABLE IN jack on the back of  
your TV and to the antenna or cable TV wall jack.  
3
Connect a coaxial cable (not included) to the ANT/CABLE IN jack  
on the back of your TV and to the coaxial out jack on the cable or  
satellite box.  
Cable or  
satellite box  
From cable TV  
wall jack (75 ohm)  
To Cable-in jack on the  
cable TV or satellite box  
Back of TV  
Back of TV  
COMPONENT IN  
Coaxial cable  
COMPONENT IN  
Coaxial cable  
3
4
Turn on your TV.  
Go through the setup wizard on page 16.  
4
5
Turn on your TV, then turn on the cable or satellite box.  
Go through the setup wizard on page 16.  
Notes  
Use a coaxial cable to eliminate interference and  
noise from radio waves.  
Do not bundle the coaxial cable with the power  
cord or other cables.  
If the antenna is not installed correctly, contact  
qualified service personnel to correct the  
problem.  
Notes  
Use a coaxial cable to eliminate interference and  
noise from radio waves.  
Do not bundle the coaxial cable with the power  
cord or other cables.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
11  
Making connections  
DX-40L261A12  
Using DVI (same as HDMI but requires a sound  
connection)  
Connecting a DVD or Blu-ray player  
Using HDMI (best)  
To connect a DVD or Blu-ray player using DVI:  
To connect a DVD or Blu-ray player using HDMI:  
1
2
3
Make sure that your TV’s power cord is unplugged and the DVD or  
1
Make sure that your TV’s power cord is unplugged and the DVD or  
Blu-ray player is turned off.  
Blu-ray player is turned off.  
Connect an HDMI-DVI adapter (not included) to one end of an  
HDMI cable (not included).  
Connect the HDMI-DVI adapter to the HDMI 1 jack on the side of  
your TV and to the DVI OUT jack on the DVD or Blu-ray player.  
2
Connect an HDMI cable (not included) to an HDMI jack on the  
side of your TV and to the HDMI OUT jack on the DVD or Blu-ray  
player.  
DVD or Blu-ray player  
DVD or Blu-ray player  
Side of TV  
Side of TV  
HDMI cable with  
HDMI-DVI adapter  
3
4
5
Turn on your TV, then turn on the DVD or Blu-ray player.  
Press INPUT to open the Source List.  
Press or to highlight HDMI 1 or HDMI 2, then press  
OK/ENTER.  
4
Connect a 3.5 mm audio cable (not included) to the PC/DVI  
AUDIO IN jack on the side of your TV and to the AUDIO OUT jacks  
on the DVD or Blu-ray player.  
Note  
Note  
When you connect the audio using the PC/DVI  
AUDIO IN jacks, the audio output is analog.  
Your TV has a digital audio jack, so you can connect  
the video to the component video jacks and connect  
the audio to the digital audio jack to get digital audio  
output.  
You can also press HDMI repeatedly to select the  
DVD or Blu-ray player.  
5
6
Turn on your TV.  
Turn on the DVI device, then set it to the output mode. See the  
documentation that came with the device for more information.  
7
8
Press INPUT to open the Input Source list.  
Press or to select HDMI 1 then press OK/ENTER.  
Note  
You can also press HDMI repeatedly to select the  
HDMI 1 or HDMI 2.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
12  
DX-40L261A12  
Making connections  
Using component video (better)  
Using composite video (good)  
To connect a DVD or Blu-ray player using component video:  
To connect a DVD or Blu-ray player using composite video:  
1
Make sure that your TV’s power cord is unplugged and the DVD or  
Blu-ray player is turned off.  
1
Make sure that your TV’s power cord is unplugged and the DVD or  
Blu-ray player is turned off.  
2
Connect a component video cable (not included) to the Y/PB/PR  
(component video) jacks on the back of your TV and to the  
COMPONENT OUT jacks on the component video device.  
2
Connect an AV cable (included) to the AV IN jacks on the back of  
your TV and to the AV OUT jacks on the DVD or Blu-ray player.  
Note  
When you connect the audio using the L and R audio  
jacks, the audio output is analog.  
DVD or Blu-ray player  
DVD or Blu-ray player  
Side of TV  
Audio cable  
Back of TV  
COMPONENT IN  
Cables are often color-coded to match  
color-coded jacks.  
Connect yellow to yellow, red to red,  
and white to white.  
Component video cable  
Cables are often color-coded to  
match color-coded jacks.  
3
4
5
Turn on your TV, then turn on the DVD or Blu-ray player.  
Press INPUT to open the Input Source list.  
Press or to select AV, then press OK/ENTER.  
Notes  
3
Connect an audio cable (not included) to the L/R (audio in) jacks  
You can also press VIDEO to select the DVD or  
Blu-ray player.  
If you are not using the included audio cable for  
another device, you can use it and a standard  
one-plug video cable instead of the three-plug  
cable shown in this task.  
on the back of your TV and to the L/R AUDIO OUT jacks on the  
component video device.  
Notes  
When you connect the audio using the L and R audio  
jacks, the audio output is analog.  
Your TV has a digital audio jack, so you can connect  
the video to the component video jacks and connect  
the audio to the digital audio jack to get digital audio  
output.  
4
5
6
Turn on your TV, then turn on the DVD or Blu-ray player.  
Press INPUT to open the Input Source list.  
Press or to select Component, then press OK/ENTER.  
Note  
You can also press COMP to select the component  
DVD or Blu-ray player.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13  
Making connections  
DX-40L261A12  
Connecting a VCR  
Connecting a camcorder or game console  
To connect a VCR:  
Note  
1
Make sure that your TV’s power cord is unplugged and the VCR is  
If your camcorder or game console has an HDMI  
connection, we recommend that you use the HDMI  
connection to get the best quality possible.  
turned off.  
2
Connect an AV cable (included) to the AV IN jacks on the back of  
your TV and to the AV OUT jacks on the VCR.  
To connect a camcorder or game console:  
Note  
1
Make sure that your TV’s power cord is unplugged and the  
camcorder or game console is turned off.  
Connect an AV cable (included) to the AV IN jacks on the back of  
your TV and to the AV OUT jacks on the camcorder or game  
console.  
When you connect the audio using the L and R audio  
jacks, the audio output is analog.  
2
VCR  
Note  
Side of TV  
When you connect the audio using the L and R audio  
jacks, the audio output is analog.  
Camcorder or  
game console  
Cables are often color-coded to  
match color-coded jacks.  
Connect yellow to yellow, red to  
red, and white to white.  
Cables are often color-coded to match  
color-coded jacks.  
Connect yellow to yellow, red to red, and  
white to white.  
3
4
Turn on your TV, then press INPUT to open the Input Source list.  
Press or to select AV, then press OK/ENTER.  
Note  
You can also press VIDEO to select the VCR.  
5
Turn on the VCR, insert a videotape, then press PLAY on the VCR.  
3
4
Turn on your TV, then press INPUT to open the Input Source list.  
Press or to select AV, then press OK/ENTER.  
Note  
You can also press VIDEO to select the camcorder or  
game console.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
14  
DX-40L261A12  
Making connections  
Using HDMI  
Connecting a computer  
To connect a computer using HDMI:  
Tip  
1
Make sure that your TV’s power cord is unplugged and the  
computer is turned off.  
Some computers have an HDMI jack. You can use an  
HDMI cable to connect the computer for a better  
picture and sound.  
2
Connect an HDMI cable (not included) to an HDMI jack on the  
side of your TV and to the HDMI OUT jack on the computer.  
Using VGA  
To connect a computer using VGA:  
1
Make sure that your TV’s power cord is unplugged and the  
computer is turned off.  
2
Connect a VGA cable (not included) to the VGA IN jack on the  
side of your TV and to the VGA jack on the computer.  
HDMI cable  
Side of TV  
Side of TV  
VGA cable  
Audio cable with  
stereo mini plug  
3
4
5
Turn on your TV, then turn on the computer  
Press INPUT to open the Source List.  
Press or to highlight HDMI 1 or HDMI 2, then press  
OK/ENTER.  
Note  
You can also press HDMI repeatedly to select the  
computer.  
Note  
A VGA cable is not supplied with this TV. We strongly  
recommend that you use a VGA cable with two EMC  
cores (the large bumps in the cable), as shown in the  
figure above.  
3
Connect an audio cable with stereo mini plug to the VGA AUDIO  
IN jack on the side of your TV and to the LINE OUT or AUDIO OUT  
jack on the computer.  
4
5
6
7
Turn on your TV, then turn on the computer.  
Press INPUT to open the Input Source list.  
Press or to select VGA, then press OK/ENTER.  
Adjust the display properties on the computer if necessary.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
15  
Using the remote control  
DX-40L261A12  
Connecting headphones  
Connecting a home theater system with  
multiple devices  
The TV speakers are muted when headphones are  
attached.  
Blu-ray player/DVD player/VCR  
Cable or satellite TV box  
Warning  
Loud noise can damage your hearing. When using  
headphones, use the lowest volume setting on your  
headphones that still lets you hear the sound.  
To connect headphones:  
• Connect headphones to the (headphone) jack on the back of  
your TV.  
AV receiver  
Game console or camera  
Side of TV  
USB flash drive  
Computer  
Antenna or cable TV  
connected directly to  
the wall jack  
The connections you make depend on the video and audio jacks  
available on your devices. Refer to the documentation that came with  
your devices for connection information.  
Remember to use the best connection types available for the best  
picture and sound. For information about connection types, see “What  
connection should I use?” on page 7.  
Connecting a basic home theater system  
Using digital audio  
To connect a basic home theater system using digital audio:  
Using the remote control  
1
Make sure that your TV’s power cord is unplugged and the home  
theater system is turned off.  
2
Connect a digital coaxial audio cable to the digital output jack on  
the back of your TV and to the digital coaxial audio jack on the  
digital home theater system.  
Installing remote control batteries  
To install the remote control batteries:  
1
Remove the battery cover.  
Digital audio  
cable  
Side of TV  
2
Insert two AAA batteries into the battery compartment. Make  
sure that you match the + and – symbols on the batteries with  
the + and – symbols in the battery compartment.  
Home theater system  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
16  
DX-40L261A12  
Turning on your TV for the first time  
3
Replace the battery cover.  
4
Press or to highlight Home Mode or Retail Mode, then  
press ENTER. The Choose your Tuner Mode screen opens.  
Cautions  
Batteries should not be exposed to excessive  
heat, such as sunshine, heat registers, or fire.  
Battery chemicals can cause a rash. If the  
batteries leak, clean the battery compartment  
with a cloth. If chemicals touch your skin, wash  
immediately.  
Setup Wizard  
Chooseyour Tuner Mode  
Antenna  
Make sure that batteries are disposed of  
correctly. Do not burn or incinerate.  
Cable  
Cable/Satellite Box  
Aiming the remote control  
Select  
Next  
Back  
To aim the remote control:  
• Point the remote control towards the remote sensor on the  
front of your TV.  
5
6
Press or to highlight Antenna, Cable, or Cable/Satellite  
Box (if your cable TV uses a box, select Cable/Satellite Box),  
then press ENTER. If you chose Antenna or Cable, your TV  
automatically starts scanning for channels available in your  
viewing area. If you chose Cable/Satellite Box, your TV does  
not need to scan for channels.  
To watch TV, press INPUT, press or to highlight the video  
input source for your TV in the INPUT SOURCE list, then press  
ENTER.  
• If your TV is connected to an antenna, cable TV (no box), or  
cable or satellite TV box using a coaxial cable, select TV.  
• If your TV is connected to a cable or satellite box using an  
HDMI cable or HDMI cable with a DVI adapter, select HDMI 1  
or HDMI 2.  
• If your TV is connected to a cable or satellite box using a  
component video cable, select Component.  
• If your TV is connected to a cable or satellite box using a  
composite video cable, select AV.  
Turning on your TV for the first  
time  
The first time you turn on your TV, the Setup Wizard opens. The Setup  
Wizard guides you through setting up basic settings including the menu  
language, picture mode, TV signal source, and the channel list.  
To set up your TV:  
1
Make sure that you have:  
• Installed the remote control batteries. (See page 15 for  
details).  
• Connected an antenna, cable TV, or satellite TV. (See page 8  
or 10 for details.)  
• Connected the power cord. (See page 7 for details.)  
Press (power) to turn on your TV. The Choose your menu  
Language screen opens.  
2
Setup Wizard  
Understanding the basics  
Choose your menu Language  
English  
Français  
Español  
Turning your TV on or off  
To turn your TV on or off:  
1
2
Make sure that the power cord is connected to a power outlet.  
Press (power) to turn on your TV. The power indicator LED  
turns blue.  
Select  
Next  
3
Press (power) again to turn off your TV. Your TV enters  
Standby mode and the power indicator LED turns red.  
3
Press or to highlight the language you want, then press  
ENTER. The Choose your Picture Mode screen opens.  
Selecting the video input source  
To select the video input source:  
Setup Wizard  
1
Turn on your TV, then press INPUT. The Input Source list opens.  
Choose your Picture Mode  
Input  
TV  
AV  
Home Mode  
Retail Mode  
Component  
VGA  
Select  
Next  
Back  
HDMI 1  
HDMI 2  
OK  
Selec t  
Exit  
2
Press or to highlight a video input source, then press  
ENTER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
17  
Understanding the basics  
DX-40L261A12  
You can also press a direct input button to select the video input source.  
• Press TV to select TV.  
TV menu (TV mode)  
• Press VIDEO to select AV IN VIDEO.  
• Press COMP to select COMPONENT IN.  
• Press VGA to select VGA.  
• Press HDMI once to select HDMI 1. Press twice to select HDMI 2.  
Video  
Audi
Setup
TV
Tuner Mode  
Antenna  
Channel Scan  
Channel Skip  
FavoriteList  
Using the on-screen menus  
MTS/SAP  
Stereo  
English  
Audio Language  
Notes  
Depending on the signal source selected, you  
may see different options on your screen. The  
following menus are shown in TV mode.  
Menu items that are not selectable are grayed  
out.  
Menus in this manual are described in TV mode,  
unless otherwise indicated.  
The screens shown in this manual are for  
explanation purposes and may vary from the  
actual screens on your TV.  
Select  
Back  
Exit  
Navigating the menus  
Press MENU to open the on-screen menu.  
Video menu (TV mode)  
Press the right or left arrow to move the cursor  
on the screen or to adjust a selected item.  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Color  
Tint  
Sharpness  
Energy Savings  
47  
56  
53  
0
Press the up or down arrow to select menu  
options.  
4
Color Temperature  
Cool  
Advanced Video  
Select  
Move  
Back  
Exit  
Press ENTER to confirm a selection or enter a  
sub-menu.  
Audio menu (TV mode)  
Press MENU to return to the previous menu.  
Press EXIT to close the menu.  
Video  
Audio  
Setup  
TV  
Sound Mode  
Balance  
Surround Sound  
Equalizer  
Standard  
0
Digital Audio/SPDIF  
PCM  
Auto Volume Contorl  
Selecting a channel  
To select a channel:  
Select  
Adjust  
Back  
Exit  
• Press CH+ or CH– to go to the next or previous channel on the  
memorized channel list.  
Setup menu (TV mode)  
• Press the number buttons to enter the channel number you want,  
then wait for the channel to change or press ENTER to  
immediately change the channel.  
• To select a digital sub-channel, press the number buttons to  
select the main digital channel, press (dot), then press the  
number button for the sub-channel. Wait for the channel to  
change, or press ENTER to immediately change the channel. For  
example, to tune to channel 5.1, press 5, (dot), then 1.  
• Press RECALL to go to the last viewed channel.  
• Press CH-LIST to open the channel list, press or to highlight  
a channel, then press ENTER. Hidden channels are grayed out in  
this Channel List.  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
Parental  
English  
Wide  
On  
Reset Default  
Select  
Adjust  
Back  
Exit  
• Press FAVORITE to open the favorite channel list, press or ꢁ  
to highlight a channel, then press ENTER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
18  
DX-40L261A12  
Adjusting the picture  
Custom—(customized picture). Lets you manually  
adjust picture settings such as brightness, contrast, and  
sharpness.  
Adjusting the volume  
To adjust the volume:  
• Press VOL + or VOL – to increase or decrease the volume.  
Note  
• Press MUTE to turn off the sound. Press MUTE again to turn the  
You can also press PICTURE to select the picture  
mode.  
sound back on.  
Viewing channel information  
Brightness—Adjusts the brightness of the dark areas of  
the picture.  
To view channel information:  
Contrast—Adjusts the brightness of the light areas of the  
picture.  
• Press INFO to display an information banner. The information  
banner shows the current program information such as channel  
number, video input source, and resolution.  
Color—Adjusts the color intensity of the picture. A low  
setting may make the color look faded. A high setting may  
make the color look artificial.  
Tint—Adjusts the color balance of the picture. Use this  
control to make skin tones look more natural.  
Sharpness—Adjusts the color detail of images. If you set  
this control too high, dark images may appear with light or  
white edges.  
Color Temperature—Selects the color temperature. You  
can select Cool (to enhance the blues), Normal, or Warm  
(to enhance the reds).  
Advanced Video—Opens the PICTURE-Advanced Video  
menu where you can adjust additional video options.  
• Digital channel information—Displays the channel number,  
station name, channel label, broadcast program name, TV  
rating, signal type, audio information, resolution, CC mode,  
current time, and current program start and end times.  
• Analog channel information—Displays channel number,  
channel label (if preset), signal type, audio information, and  
resolution.  
• Press GUIDE to show the digital program guide, which may  
present a list of available programs, program times, and program  
summaries, depending on the information provided by the  
broadcaster.  
Noise Reduction—Selects the noise reduction mode  
to reduce picture noise (snow). You can select Low,  
Middle, Strong, or Off.  
Adjusting the picture  
Adjusting the TV picture  
Adaptive Contrast—Automatically adjusts picture  
detail and brightness. You can select On or Off.  
Press MENU to return to the previous menu, or press EXIT to  
close the menu.  
To adjust the TV picture:  
3
1
Press MENU. The on-screen menu opens with the Video menu  
displayed.  
Adjusting the computer image  
To adjust the computer image:  
Video  
Audio  
Setup  
TV  
1
Make sure that your TV is in VGA mode. For more information, see  
Picture Mode  
Brightness  
Contrast  
Color  
Tint  
Energy Savings  
“Selecting the video input source” on page 16.  
47  
56  
53  
0
2
Press MENU. The on-screen menu opens.  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Color Temperature  
VGA  
Energy Savings  
Cool  
Select  
Move  
Back  
Exit  
56  
49  
2
Press or to highlight an option, then press or to adjust  
the option. You can select:  
Picture Mode—Selects the picture mode. You can select:  
Vivid—(a bright and vivid picture). Significantly  
increases the contrast, brightness, and sharpness. This  
selection is good for video games, animation, and in  
bright light environments.  
Select  
Move  
Back  
Exit  
3
Press or to highlight VGA, then press ENTER. The VGA menu  
Standard—(a standard picture). Moderately increase  
the contrast, brightness, and sharpness. This selection is  
good for standard TV broadcasts.  
opens.  
Energy Savings—(the backlight brightness is  
decreased). Your TV has a backlight that provides light  
for displaying a picture. By reducing the amount of light,  
your TV uses less energy.  
Video  
Audio  
Setup  
TV  
Auto Adjust  
H.Position  
V.Position  
Phase  
56  
49  
4
125  
Clock  
Select  
Enter  
Back  
Exit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
19  
Adjusting the sound  
DX-40L261A12  
4
5
Press or to highlight an option, then press or to adjust  
Auto Volume Control—Lets you turn automatic volume  
control On or Off. When this option is turned on, it keeps the  
audio within a preset range, to eliminate large spikes in  
volume.  
the option. You can select:  
Auto Adjust—Automatically adjusts the image settings  
such as position and phase.  
4
Press MENU to return to the previous menu, or press EXIT to  
close the menu.  
H. Position—Moves the image right or left.  
V. Position—Moves the image up or down.  
Phase—Adjusts the focus of stable images.  
Clock—Adjusts the sample frequency.  
Press MENU to return to the previous menu, or press EXIT to  
close the menu.  
Changing channel settings  
Automatically scanning for channels  
When you scan for channels, your TV searches for channels with signals  
and stores the channel information in the channel list. When you press  
CH + or CH –, your TV goes to the next or previous channel in the  
channel list.  
Adjusting the sound  
Adjusting sound settings  
If the TV signal source changes, for example you change from an  
outdoor antenna to cable TV (no box), you need to scan for channels.  
To automatically scan for channels:  
To adjust sound settings:  
1
Press MENU. The on-screen menu opens.  
1
Press MENU. The on-screen menu opens.  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
Video  
Audio  
Setup  
TV  
47  
56  
53  
0
Picture Mode  
Brightness  
Contrast  
Energy Savings  
Color  
47  
56  
53  
0
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Color  
Cool  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
Select  
Move  
Back  
Exit  
Select  
Move  
Back  
Exit  
2
Press or to highlight AUDIO, then press . The AUDIO menu  
opens.  
2
Press or to highlight TV, then press . The TV menu opens.  
Video  
Audio  
Setup  
TV  
Video  
Audio  
Setup  
TV  
Sound Mode  
Standard  
Balance  
Surround Sound  
Equalizer  
Digital Audio/SPDIF  
Auto Volume Contorl  
0
Tuner Mode  
Channel Scan  
Channel Skip  
Favorite List  
MTS/SAP  
Antenna  
PCM  
Stereo  
Audio Language  
English  
Select  
Adjust  
Back  
Exit  
Select  
Adjust  
Back  
Exit  
3
Press or to highlight an option, then press or to adjust  
3
4
Press or to highlight Tuner Mode, then press or to  
select Antenna, Cable, or Cable/Satellite Box.  
Press or to highlight Channel Scan, then press ENTER. The  
TV-Channel Scan screen opens.  
the option. You can select:  
Sound Mode—Selects the sound mode. You can select  
Standard, News, Custom, or Music.  
Balance—Adjusts the balance between the left and right  
audio channels.  
Surround Sound—Turns the surround sound effect On or  
Off.  
Channel Scan  
Equalizer—Lets you select the frequency you want to  
adjust or change its value.  
Channel  
4
Search type  
Antenna  
Digital Audio/SPDIF—Sends digital audio to an external  
audio system. You can select PCM (to select to output audio  
in 2-channel stereo), or RAW (to pass through the original  
digital audio sound).  
23%  
DTV  
0
TV  
4
Return  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
20  
DX-40L261A12  
Changing channel settings  
• If you are using an antenna for a standard or HD TV signal,  
select Antenna.  
4
5
Press or to highlight the channel you want to hide, then  
press ENTER. The check mark disappears.  
• If your cable is connected to your TV through a tuner box,  
select Cable/Satellite Box.  
Notes  
A channel with a check mark is not hidden. A  
channel with no check mark is hidden.  
If the list has more than one page, press or ꢁ  
If you selected Antenna or Cable, your TV searches  
automatically for available channels in your area and stores  
the channel information in the channel list. This may take  
several minutes. While searching, the TV displays a progress  
report.  
If you selected Cable/Satellite Box, the channel search is  
not necessary.  
to scroll through the pages.  
Press EXIT to close the menu.  
Setting up a favorite channel list  
Note  
You can create a favorite channel list so you can quickly browse through  
your favorite channels by pressing FAVORITE, then selecting a channel  
from the favorite channel list.  
You can press EXIT to stop the auto channel search,  
but you will need to run the auto channel search  
again to create a channel list.  
To set up a favorite channel list:  
1
2
3
Press MENU. The on-screen menu opens.  
Hiding channels  
You can hide channels in the channel list. When you press or  
your TV skips the hidden channels. You can still tune to a hidden  
channel by pressing the number buttons for the channel.  
To hide channels:  
,
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
1
Press MENU. The on-screen menu opens.  
Color  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
Select  
Move  
Back  
Exit  
Color  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Press or to highlight TV, then press . The TV menu opens.  
Cool  
Select  
Move  
Back  
Exit  
Video  
Audio  
Setup  
TV  
Tuner Mode  
Channel Scan  
Channel Skip  
Favorite List  
MTS/SAP  
Antenna  
2
Press or to highlight TV, then press . The TV menu opens.  
Stereo  
Audio Language  
English  
Video  
Audio  
Setup  
TV  
Tuner Mode  
Channel Scan  
Channel Skip  
Favorite List  
MTS/SAP  
Antenna  
Select  
Adjust  
Back  
Exit  
Stereo  
Press or to highlight Favorite List, then press ENTER. The  
TV-Favorite List screen opens.  
Audio Language  
English  
Select  
Adjust  
Back  
Exit  
2
3
4
5
5.1  
5.2  
5.3  
5.4  
3
Press or to highlight Channel Skip, then press ENTER. The  
Channels list opens.  
6
2
3
4
5
5.1  
5.2  
5.3  
5.4  
Set  
Select  
Back  
Exit  
6
Set  
Select  
Back  
Exit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
21  
Setting parental controls  
DX-40L261A12  
4
Press or to highlight the channel you want to add to the  
Selecting an audio language  
favorites list, then press ENTER. A check mark appears next to  
You can select the default audio language to listen to when watching  
the channel.  
digital TV programs.  
Notes  
To select the audio language:  
To remove a channel from the favorites list,  
highlight the channel, then press ENTER. The  
check mark disappears and the channel is  
removed from the list.  
1
Press MENU. The on-screen menu opens.  
If the list has more than one page, press or ꢁ  
Video  
Audio  
Setup  
TV  
to scroll through the pages.  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
5
Press EXIT to close the menu.  
Color  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
Viewing a favorite channel  
4
Cool  
To view a favorite channel:  
1
Press FAVORITE on the remote control. The favorite channel list  
opens.  
Select  
Move  
Back  
Exit  
2
Press or to highlight a channel, then press ENTER.  
2
Press or to highlight TV, then press . The TV menu opens.  
Using MTS/SAP  
You can select the default audio stream when watching analog TV.  
To use MTS/SAP:  
Video  
Audio  
Setup  
TV  
1
Press MENU. The on-screen menu opens.  
Tuner Mode  
Channel Scan  
Channel Skip  
Favorite List  
MTS/SAP  
Antenna  
Video  
Audio  
Setup  
TV  
Stereo  
Audio Language  
English  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
Color  
Select  
Adjust  
Back  
Exit  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
3
4
Press or to highlight Audio Language, then press or ꢃ  
to select the default audio language you want. You can select:  
Select  
Move  
Back  
Exit  
English  
Spanish  
French  
2
Press or to highlight TV, then press . The TV menu opens.  
Press EXIT to close the menu.  
Video  
Audio  
Setup  
TV  
Setting parental controls  
Tuner Mode  
Channel Scan  
Channel Skip  
Favorite List  
MTS/SAP  
Antenna  
Setting or changing the password  
Stereo  
English  
Parental controls let you prevent your children from watching  
inappropriate material on TV. When set, parental controls read the  
rating of the program (with some exceptions, such as news and sports)  
and deny access to programs that exceed the ratings level you select. To  
watch programs that exceed the selected rating, you must enter a  
password.  
Audio Language  
Select  
Adjust  
Back  
Exit  
3
4
Press or to highlight MTS/SAP, then press or to select  
the default audio stream you want. You can select:  
To set or change the password:  
1
Press MENU. The on-screen menu opens.  
MONO–if there is noise or static on weak stereo broadcasts.  
STEREO–for programs broadcast in stereo.  
SAP–to listen to a secondary audio program (if available).  
Video  
Audio  
Setup  
TV  
Note  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
You can also press MTS/SAP on the remote control  
one or more times to select the audio mode.  
Color  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
Press EXIT to close the menu.  
4
Cool  
Select  
Move  
Back  
Exit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
22  
DX-40L261A12  
Setting parental controls  
2
Press or to highlight Setup, then press . The Setup menu  
Locking control buttons  
opens.  
When the button lock is turned On, the buttons on the side of your TV  
are locked and you can only operate your TV using the remote control.  
To lock control buttons:  
Video  
Audio  
Setup  
TV  
1
Press MENU. The on-screen menu opens.  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
Parental  
Reset Default  
English  
Wide  
On  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
Color  
Tint  
Enter  
Back  
Exit  
Select  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
3
4
Press to highlight Parental, then press ENTER. The Input  
Password screen opens.  
Select  
Move  
Back  
Exit  
2
Press or to highlight Setup, then press . The Setup menu  
Input Password  
opens.  
Return  
Press the number buttons to enter the four-digit password. The  
default password is 0000. You should change the password to a  
number you can remember. The Parental menu opens.  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
English  
Wide  
On  
Time Setup  
Caption  
Parental  
Video  
Audio  
Setup  
TV  
Reset Default  
Channel Block  
Program Block  
Input Block  
Enter  
Back  
Exit  
Select  
Change Password  
Clean All  
Button Lock  
3
4
Press to highlight Parental, then press ENTER. The Input  
Password screen opens.  
Select  
Back  
Exit  
Enter  
Input Password  
5
Press or to highlight Change Password, then press  
ENTER. The password entry screen opens.  
Return  
Press the number buttons to enter the four-digit password. The  
Setup-Parental menu opens.  
Video  
Audio  
Setup  
TV  
New Password  
Video  
Audio  
Setup  
TV  
Channel Block  
Program Block  
Input Block  
Change Password  
Clean All  
Button Lock  
Back  
6
7
Press the number buttons to enter a password, then enter the  
Select  
Back  
Exit  
Enter  
password again. The Parental menu opens again.  
Note  
5
6
Press or to highlight Button Lock, then press or to  
select On (locks the buttons), or Off (unlocks the buttons).  
If you forget your password, enter 9999.  
Press EXIT to close the menu.  
Press EXIT to close the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
23  
Setting parental controls  
DX-40L261A12  
5
Press or to highlight Program Block. The Program Block  
menu opens with Rating Enable highlighted.  
Setting parental control levels  
You can set parental controls for the U.S. and Canada.  
The following task shows how to set controls for U.S. TV ratings. You use  
similar steps for setting U.S. movie and Canadian TV ratings.  
To set parental control levels:  
Video  
Audio  
Setup  
TV  
1
Press MENU. The on-screen menu opens.  
Rating Enable  
On  
U.S TV Ratings  
U.S Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
Block Unrated  
47  
56  
53  
0
Color  
Select  
Adjust  
Back  
Exit  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
6
7
Press or to select On or Off.  
Press or to highlight US TV Ratings, US Movie Ratings,  
Canadian English Ratings, or Canadian French Ratings,  
then press or ENTER. The TV Rating sub-menu opens.  
Select  
Move  
Back  
Exit  
2
Press or to highlight Setup, then press . The Setup menu  
opens.  
Video  
Audio  
FV  
Setup  
TV  
A
D
L
S
V
TV-Y  
TV-Y7  
TY-G  
TV-PG  
TV-14  
TV-MA  
Video  
Audio  
Setup  
TV  
□ □ □ □  
□ □ □ □  
□ □ □  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
English  
Wide  
On  
Allowed Rating  
Allowed Rating  
Parental  
Reset Default  
Set  
Select  
Back  
Enter  
Back  
Exit  
Select  
8
9
Press ꢀ ꢁ ꢂ or to highlight the rating you want to block, then  
press ENTER. A lock symbol appears when a rating is blocked.  
Note  
3
4
Press to highlight Parental, then press ENTER. The Input  
Password screen opens.  
When you block a rating, that rating and all higher  
ratings are blocked.  
Press EXIT to close the menu.  
Input Password  
U.S. TV ratings (age-based)  
Return  
TV-Y  
All children  
Press the number buttons to enter the four-digit password. The  
TV-Y7  
Children over seven years  
of age  
Setup-Parental menu opens.  
TV-G  
General audiences  
TV-PG  
Parental guidance  
suggested  
Video  
Audio  
Setup  
TV  
TV-14  
Parents strongly cautioned  
Mature audiences only  
Channel Block  
Program Block  
Input Block  
TV-MA  
Change Password  
Clean All  
Button Lock  
Select  
Back  
Exit  
Enter  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
24  
DX-40L261A12  
Setting parental controls  
2
Press or to highlight Setup, then press . The Setup menu  
opens.  
U.S. movie (MPAA) ratings  
None  
G
Movie not rated  
General audiences  
PG  
Parental guidance  
suggested  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
Parental  
Reset Default  
English  
Wide  
On  
PG-13  
R
Suitable for children 13 and  
older  
Parental guidance  
suggested for children  
under 17  
NC-17  
X
Not suitable for children  
under 17  
Enter  
Back  
Exit  
Select  
Adults only  
3
4
Press to highlight Parental, then press ENTER. The Input  
Password screen opens.  
Canadian English ratings  
E
Exempt programming  
C
Children  
Input Password  
C8+  
G
Children over 8 years old  
General audiences  
Parental guidance  
Over 14 years old  
Adult programming  
Return  
PG  
14+  
18+  
Press the number buttons to enter the four-digit password. The  
Setup-Parental menu opens.  
Video  
Audio  
Setup  
TV  
Canadian French ratings  
Channel Block  
Program Block  
Input Block  
Change Password  
Clean All  
E
Exempt programming  
General audiences  
Over 8 years old  
G
8ans+  
13ans+  
16ans+  
18ans+  
Button Lock  
Over 13 years old  
Over 16 years old  
Adult programming  
Select  
Back  
Exit  
Enter  
5
Press or to highlight Program Block. The Program Block  
Downloading rating information  
menu opens.  
You can download rating information to use when setting parental  
controls by enabling the optional Open V-Chip setting in parental  
controls. If the program is broadcast with Open V-Chip rating  
information, the information is downloaded automatically.  
To download rating information:  
Video  
Audio  
Setup  
TV  
Rating Enable  
On  
1
Press MENU. The on-screen menu opens.  
U.S TV Ratings  
U.S Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
Video  
Audio  
Setup  
TV  
Block Unrated  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
Select  
Adjust  
Back  
Exit  
Color  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
6
7
Press or to highlight Open V-Chip, then press ENTER. The  
Open V-Chip menu opens. You can set the rating level according  
to the Open V-Chip rating information.  
Cool  
Select  
Move  
Back  
Exit  
Press EXIT to close the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
25  
Using closed captioning  
DX-40L261A12  
5
Press or to highlight Program Block. The Program Block  
Blocking unrated TV  
menu opens.  
Not all TV programs have a rating signal. You can block all unrated  
programs from displaying on your TV.  
To block unrated TV:  
Video  
Audio  
Setup  
TV  
1
Press MENU. The on-screen menu opens with the Picture menu  
displayed.  
Rating Enable  
On  
U.S TV Ratings  
U.S Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
Block Unrated  
47  
56  
53  
0
Color  
Select  
Adjust  
Back  
Exit  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
6
7
Press or to highlight Block Unrated, then press or to  
select On (to block unrated TV), or Off (to unlock unrated TV).  
Press EXIT to close the menu.  
Select  
Move  
Back  
Exit  
2
Press or to highlight Setup, then press . The Setup menu  
opens.  
Using closed captioning  
Selecting the analog closed captioning  
mode  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
English  
Wide  
On  
To select the analog closed captioning mode:  
1
Press MENU. The on-screen menu opens.  
Parental  
Reset Default  
Video  
Audio  
Setup  
TV  
Enter  
Back  
Exit  
Select  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
Color  
3
4
Press to highlight Parental, then press ENTER. The Input  
Password screen opens.  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
Select  
Move  
Back  
Exit  
Input Password  
Return  
2
Press or to highlight Setup, then press . The Setup menu  
Press the number buttons to enter the four-digit password. The  
Setup-Parental menu opens.  
opens.  
Video  
Audio  
Setup  
TV  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
Parental  
Reset Default  
English  
Wide  
On  
Channel Block  
Program Block  
Input Block  
Change Password  
Clean All  
Button Lock  
Enter  
Back  
Exit  
Select  
Select  
Back  
Exit  
Enter  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
26  
DX-40L261A12  
Using closed captioning  
3
Press or to highlight Caption, then press ENTER. The  
Setup-Caption menu opens.  
3
Press or to highlight Caption, then press ENTER. The  
Setup-Caption menu opens.  
Video  
Audio  
Setup  
TV  
Video  
Audio  
Setup  
TV  
Analog Closed Caption  
Digital Closed Caption  
Digital Caption Style  
Analog Closed Caption  
Digital Closed Caption  
Digital Caption Style  
Select  
Adjust  
Back  
Exit  
Select  
Adjust  
Back  
Exit  
4
5
Press or to highlight Analog Closed Caption, then press  
or to select an analog caption setting. You can select:  
CC1 through CC4—Closed captioning appears in a small  
banner across the bottom of the screen. CC1 is usually the  
“printed” version of the audio. CC2 through CC4 display  
content provided by the broadcaster.  
4
5
Press or to highlight Digital Closed Caption (only  
available for digital stations), then press or to highlight a  
digital caption setting. You can select Service1 through  
Service6.  
Press MENU to return to the previous menu, press or to  
highlight Digital Caption Style, then press ENTER. The Digital  
Caption Style menu opens.  
Text1 through Text4—Closed captioning that covers half  
or all of the screen. Text1 through Text4 display content  
provided by the broadcaster.  
Press EXIT to close the menu.  
Video  
Audio  
Setup  
Custom  
TV  
Caption Style  
Font Size  
Font Style  
Customizing digital closed captioning  
styles  
Large  
Style 1  
White  
Solid  
Black  
Solid  
Black  
Transparent  
Font Color  
Font Opacity  
Background Color  
Background Opacity  
Window Color  
Window Opacity  
To customize digital closed captioning styles:  
1
Press MENU. The on-screen menu opens.  
Select  
Adjust  
Back  
Exit  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
6
7
Press or to highlight Digital Caption Style, then press ꢂ  
or to select Custom.  
Color  
Tint  
Note  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
To reset the close caption styles to their defaults, set  
Style to As Broadcaster.  
Select  
Move  
Back  
Exit  
Press or to highlight a style, then press or to adjust the  
style. You can select:  
Font Size—Selects the font size.  
2
Press or to highlight Setup, then press . The Setup menu  
Font Style—Selects the font style.  
opens.  
Font Color—Selects the color for the words.  
Font Opacity—Selects the opacity level for the words.  
Background Color—Selects the color for the background.  
Background Opacity—Selects the opacity level for the  
background.  
Window Color—Selects the edge color.  
Window Opacity—Selects the edge style.  
Press EXIT to close the menu.  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
English  
Wide  
On  
Time Setup  
Caption  
8
Parental  
Reset Default  
Enter  
Back  
Exit  
Select  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
27  
Adjusting the aspect ratio  
DX-40L261A12  
Adjusting the aspect ratio  
Adjusting time settings  
Setting the aspect ratio  
Setting the clock  
To set the aspect ratio:  
To set the clock:  
1
Press MENU. The on-screen menu opens.  
1
Press MENU. The on-screen menu opens.  
Video  
Audio  
Setup  
TV  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
47  
56  
53  
0
Color  
Color  
Tint  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
Cool  
Select  
Move  
Back  
Exit  
Select  
Move  
Back  
Exit  
2
Press or to highlight Setup, then press . The Setup menu  
opens.  
2
Press or to highlight Setup, then press . The Setup menu  
opens.  
Video  
Audio  
Setup  
TV  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
Parental  
Reset Default  
English  
Wide  
On  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
English  
Wide  
On  
Parental  
Reset Default  
Enter  
Back  
Exit  
Select  
Enter  
Back  
Exit  
Select  
3
Press or to highlight Aspect Ratio, then press or to  
select an aspect ratio. You can select Normal, Zoom, Wide, or  
Cinema.  
3
Press or to highlight Time Setup, then press ENTER. The  
Setup-Time menu opens.  
Aspect ratio option  
Example  
Normal:  
Video  
Audio  
Setup  
TV  
Displays the original aspect  
ratio with black bars vertical  
on the left and right sides of  
the screen.  
Time Zone  
Time  
Sleep Timer  
Zoom:  
Expands the image to fill the  
screen. The top and bottom  
of the image may be  
cropped.  
Select  
Back  
Exit  
Wide:  
Use this option to view  
content recorded in a 16:9  
(wide-screen) aspect ratio.  
Cinema:  
Stretches the image at the  
edges, but keeps a clear  
image in the center.  
Note  
You can also press ZOOM to select the aspect ratio.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
28  
DX-40L261A12  
Adjusting menu settings  
4
Press or to highlight Time Zone, then press or to  
select your time zone setting. You can select: Alaska, Hawaii,  
Eastern Time, Indiana, Central Time, Mountain Time,  
Arizona, or Pacific Time.  
2
Press or to highlight Setup, then press . The Setup menu  
opens.  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
English  
Wide  
On  
Video  
Audio  
Setup  
TV  
Time Zone  
Time  
Sleep Timer  
Parental  
Reset Default  
Enter  
Back  
Exit  
Select  
Select  
Back  
Exit  
3
Press or to highlight Time Setup, then press ENTER. The  
Setup-Time menu opens.  
5
Press or to highlight Time, then press ENTER. The  
Setup-Time menu opens.  
Video  
Audio  
Setup  
TV  
Time Zone  
Time  
Sleep Timer  
Video  
Audio  
Off  
Setup  
TV  
Auto Synchronization  
Date  
Time  
01/01/2000  
08:37 AM  
Timer  
Power On Timer  
Power Off Timer  
Off  
12:00 AM  
12:00 AM  
Select  
Back  
Exit  
Select  
Back  
4
5
Press or to highlight Sleep Timer, then press or to  
select the amount of time before your TV turns off automatically.  
To turn off the sleep timer, select Off.  
6
7
Press or to highlight Auto Synchronization, then press ꢂ  
or to select Off (to set the date and time manually), or On (the  
date and time are set automatically by the TV signal, based on  
your time zone).  
Press EXIT to close the menu.  
Note  
You can also press SLEEP to set the sleep timer.  
If you selected Off for Auto Synchronization:  
• Press or to highlight Date, then press or to go to  
the month, date, or year field. Press the number buttons  
to adjust the setting.  
Adjusting menu settings  
• Press or to highlight Time, press or to the hour,  
minute, or AM/PM field, then press the number buttons to  
adjust the hour and minute settings. Press ENTER to set AM  
or PM.  
Selecting the menu language  
To select the menu language:  
8
Press EXIT to close the menu.  
1
Press MENU. The on-screen menu opens.  
Setting the sleep timer  
Video  
Audio  
Setup  
TV  
You can specify the amount of time before your TV automatically turns  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
off.  
47  
56  
53  
0
To set the sleep timer:  
Color  
1
Press MENU. The on-screen menu opens.  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
Select  
Move  
Back  
Exit  
47  
56  
53  
0
Color  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
Select  
Move  
Back  
Exit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
29  
Maintaining  
DX-40L261A12  
2
Press or to highlight Setup, then press . The Setup menu  
opens.  
Restoring settings to the defaults  
When you restore default settings, all the settings you have customized  
(except the password and parental rating) are reset.  
To restore settings to the defaults:  
Video  
Audio  
Setup  
TV  
1
Press MENU. The on-screen menu opens.  
OSD Language  
English  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
Parental  
Reset Default  
Wide  
On  
Video  
Audio  
Setup  
TV  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
Color  
Tint  
Enter  
Back  
Exit  
Select  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
3
4
Press or to highlight OSD Language, then press or to  
select the language you want.  
Select  
Move  
Back  
Exit  
Press EXIT to close the menu.  
2
Press or to highlight Setup, then press . The Setup menu  
opens.  
Changing the DPMS setting  
Your TV must be set to VGA to use this setting.  
Your TV turns off after 10 minutes if a signal is not detected from the  
computer. When DPMS is set to ON, the TV turns on when the  
computer comes out of sleep mode. When set to OFF, the TV will not  
turn on when the computer comes out of sleep mode.  
To change the DPMS setting:  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
English  
Wide  
On  
1
Press MENU. The on-screen menu opens.  
Parental  
Reset Default  
Video  
Audio  
Setup  
TV  
Enter  
Back  
Exit  
Select  
Picture Mode  
Brightness  
Contrast  
Energy Savings  
47  
56  
53  
0
Color  
3
4
5
Press or to highlight Reset Default, then press ENTER. A  
confirmation box opens.  
Press or to select Yes (to reset) or No (to not reset), then  
Tint  
Sharpness  
Color Temperature  
Advanced Video  
4
Cool  
press ENTER.  
Press EXIT to close the menu.  
Select  
Move  
Back  
Exit  
2
Press or to highlight Setup, then press . The Setup menu  
opens.  
Maintaining  
• Do not use your TV in areas that are too hot or too cold, because  
the cabinet may warp or the screen may malfunction. Your TV  
works best in temperatures that are comfortable to you.  
• Storage temperatures are 32° to 122°F (0° to 50°C).  
• Working temperatures are 41° to 104°F (5° to 40°C).  
• Do not place your TV in direct sunlight or near a heat source.  
Video  
Audio  
Setup  
TV  
OSD Language  
Aspect Ratio  
DPMS  
Time Setup  
Caption  
Parental  
Reset Default  
English  
Wide  
On  
Cleaning the TV cabinet  
Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially  
dirty, moisten a soft, lint-free cloth in a weak detergent solution,  
squeeze the excess moisture from the cloth, then wipe the screen or  
cabinet with the cloth. Use a clean cloth to dry the screen or cabinet.  
Enter  
Back  
Exit  
Select  
3
4
Press or to highlight DPMS, then press or to select On  
(to enable), or Off (to disable).  
Press EXIT to close the menu.  
Cleaning the TV screen  
Clean the screen with a soft, lint-free cloth.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
30  
DX-40L261A12  
Problem  
Solution  
Troubleshooting  
No color, dark  
picture, or color is  
not correct.  
• Try another channel. The station may be  
experiencing problems.  
Warning  
• Adjust the color saturation. See “Adjusting  
the TV picture” on page 18.  
Do not try to repair your TV yourself. Contact  
authorized service personnel.  
• Make sure that the video cables are  
connected correctly and securely to the  
back of your TV.  
Video and audio  
• Make sure that the antenna or cable TV is  
connected correctly and securely. See  
“Connecting a cable or satellite box” on  
page 8 or “Connecting an antenna or cable  
TV (no box)” on page 10.  
Problem  
Solution  
Picture does not fill  
the screen. There are  
black bars around  
the picture.  
• Change the aspect ratio. An increasing  
amount of digital TV and movies are  
presented in wide screen (16:9). See  
“Adjusting the TV picture” on page 18.  
• If you are using an antenna, the digital  
• If you are using an antenna and the signal  
strength is low, adjust the antenna or use a  
highly directional outdoor antenna or  
set-top antenna with a built-in amplifier.  
No picture (screen is  
not lit) and no  
sound.  
• Press on the TV or the remote control.  
• Make sure that the video cables are  
connected securely to the back of your TV.  
• Adjust the contrast and brightness. See  
“Adjusting the TV picture” on page 18.  
• Make sure that the power cord is plugged  
in.  
Only snow (noise)  
appears on the  
• Try another channel. The station may be  
experiencing problems.  
• Make sure that the antenna or cable TV is  
connected correctly and securely. See  
“Connecting a cable or satellite box” on  
page 8 or “Connecting an antenna or cable  
TV (no box)” on page 10.  
• If you are using an antenna, the digital  
channel signal may be low.  
• If you are using an antenna and the signal  
strength is low, adjust the antenna or use a  
highly directional outdoor antenna or  
set-top antenna with a built-in amplifier.  
• Make sure that the correct video input  
source is selected. See “Selecting the video  
input source” on page 16.  
• Try another channel. The station may be  
experiencing problems.  
• Make sure that the incoming signal is  
compatible.  
• Make sure the antenna or cable TV is  
connected correctly and securely. See  
“Connecting a cable or satellite box” on  
page 8 or “Connecting an antenna or cable  
TV (no box)” on page 10.  
• Check the closed caption settings. Some  
TEXT modes can block the screen.  
Dotted lines or  
stripes appear on  
the screen.  
• Make sure that the antenna or cable TV is  
connected correctly and securely. See  
“Connecting a cable or satellite box” on  
page 8 or “Connecting an antenna or cable  
TV (no box)” on page 10.  
• If you are using an antenna, the digital  
channel signal may be low.  
• If you are using an antenna and the signal  
strength is low, adjust the antenna or use a  
highly directional outdoor antenna or  
set-top antenna with a built-in amplifier.  
• Make sure that the video cables are  
connected securely to the back of your TV.  
• The video cable(s) you are using may be  
bad. Try a new set.  
• Other devices (for example, surround sound  
receiver, external speakers, fans, or hair  
dryers) may be interfering with your TV. Try  
turning off one device at a time to  
determine which device is causing  
interference. Once you have determined  
which device is causing interference, move  
it further from the TV to eliminate the  
interference.  
Dark, poor, or no  
picture (screen is lit),  
but sound is good.  
• Try another channel. The station may be  
experiencing problems.  
• Make sure that the antenna or cable TV is  
connected correctly and securely. See  
“Connecting a cable or satellite box” on  
page 8 or “Connecting an antenna or cable  
TV (no box)” on page 10.  
• Adjust the brightness. See “Adjusting the TV  
picture” on page 18.  
• Make sure that the correct picture mode is  
selected. See “Adjusting the TV picture” on  
page 18.  
• If you are using an antenna, the digital  
channel signal may be low.  
• If you are using an antenna and the signal  
strength is low, adjust the antenna or use a  
highly directional outdoor antenna or  
set-top antenna with a built-in amplifier.  
• Make sure that the video cables are  
connected securely to the back of your TV.  
• The video cable(s) you are using may be  
bad. Try a new set.  
Double images.  
• Use a highly directional outdoor antenna,  
cable TV, or satellite TV.  
• Try another channel. The station may be  
experiencing problems.  
The picture has a  
few bright or dark  
spots.  
• A few bright or dark spots on an LCD screen  
is normal. It does not affect the operation of  
this TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
31  
Troubleshooting  
DX-40L261A12  
Problem  
Solution  
Problem  
Solution  
Good picture, but no • Increase the volume.  
Trouble  
• See instructions and a table of common  
codes in “Programming a universal remote  
control” on page 34.  
sound.  
• Make sure that the sound is not muted.  
programming your  
existing universal  
remote control.  
• Unplug the headphones.  
• Make sure that the correct audio mode is  
selected.  
• Codes are subject to change. For up to date  
• Replace dead batteries with new batteries.  
See “Installing remote control batteries” on  
page 15.  
• Make sure that the audio cables are  
connected correctly and securely to the  
back of your TV.  
• Make sure that the antenna or cable TV is  
connected correctly and securely. See  
“Connecting a cable or satellite box” on  
page 8 or “Connecting an antenna or cable  
TV (no box)” on page 10.  
• Refer to the User Guide that accompanied  
your universal remote control and contact  
the manufacturer if problems persist.  
• If you are using an antenna, the digital  
channel signal may be low.  
• The audio cable(s) you are using may be  
bad. Try a new set.  
General  
Problem  
Solution  
Poor picture  
• Make sure that the room is not too bright.  
Light reflecting off the screen can make the  
picture difficult to see.  
• If an S-VHS camera or a camcorder is  
connected while another connected device  
is turned on, the picture may be poor. Turn  
off one or more devices.  
No power  
• Make sure that the power cord is correctly  
connected to your TV and a power outlet.  
• Unplug the power cord, wait 60 seconds, then  
plug the cord back in and turn on your TV.  
• Other devices (for example, surround sound  
receiver, external speakers, fans, or hair dryers)  
may be interfering with your TV. Try turning  
off one device at a time to determine which  
device is causing interference. Once you have  
determined which device is causing  
Good sound but  
poor color  
• Adjust the contrast, color, and brightness  
settings.  
Audio noise  
• Other devices (for example, surround sound  
receiver, external speakers, fans, or hair  
dryers) may be interfering with your TV. Try  
turning off one device at a time to  
determine which device is causing  
interference. Once you have determined  
which device is causing interference, move  
it further from the TV to eliminate the  
interference.  
interference, move it further from the TV to  
eliminate the interference.  
“No signal” error  
message is  
displayed  
• Press INPUT and make sure that you have  
selected the correct input for the device or  
service you are trying to use.  
• If you are using a cable or satellite box, use the  
remote that came with that box to change  
channels.  
• Make sure you have the correct input selected  
to view channels from the cable or satellite  
box.  
No output from one  
of the speakers  
• Adjust the audio balance. See “Adjusting  
sound settings” on page 19.  
• Make sure that the audio cables are  
connected correctly and securely to the  
back of your TV.  
After Auto  
• Reception can vary by channel depending on  
the broadcast power level of a given station.  
Contact your cable or satellite TV provider.  
• Make sure the antenna or cable/satellite TV is  
connected securely to your TV.  
• Try replacing the cable between the  
antenna/cable or cable/satellite box and your  
Channel Search,  
there are no  
channels  
After images appear • Do not display a still image, such as a logo,  
game, or computer image, for an extended  
period of time. This can cause a permanent  
after-image to be burned into the screen.  
This type of damage is not covered by your  
warranty.  
display.  
Make sure that the channels are not blocked.  
See “Setting parental control levels.”  
• Make sure that the channels are not hidden.  
The channel may have been deleted from the  
channel list. You can tune to the channel by  
pressing the number buttons or you can add  
the channel back to the channel list. See  
“Hiding channels” on page 20.  
Remote control  
Problem  
Solution  
Remote control  
does not work.  
• Make sure that the power cord is correctly  
• If you are using a cable or satellite box, use the  
remote that came with that box to change  
channels.  
connected to your TV and a power outlet.  
• Make sure that there are no obstructions  
between the remote control and the remote  
control sensor on the front of the TV.  
• Point the remote control directly at the  
remote control sensor on your TV. For the  
location of the remote control sensor, see  
“Front” on page 5.  
• Make sure you have the correct input selected  
to view channels from the cable or satellite  
box.  
• If you are using an antenna, the digital  
channel signal may be low.  
• Make sure that the batteries are installed  
correctly. See “Installing remote control  
batteries” on page 15.  
• Replace dead batteries with new batteries.  
See “Installing remote control batteries” on  
page 15.  
Password is lost.  
• Enter 9999 to access parental controls, then  
set a new password. See “Setting or changing  
the password” on page 21.  
Some settings  
cannot be  
accessed.  
• If a setting is grayed, the setting is not  
available in the current video input mode.  
TV cabinet creaks. • When the TV is in use, the temperature rises  
naturally and may cause the cabinet to  
expand or contract which can cause a  
creaking noise. This is not a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
32  
DX-40L261A12  
Troubleshooting  
Problem  
Solution  
Control buttons  
do not work  
• Make sure that the Button Lock option is set  
to Off. See “Locking control buttons” on  
page 22.  
• Unplug the power cord, wait a few seconds,  
then plug the cord back in and turn on your  
TV.  
TV keeps turning  
off  
• Make sure that the sleep timer is not turned  
on. See “Setting the sleep timer” on page 28.  
Note  
If the problem is not solved by using these  
troubleshooting instructions, turn off your TV, then  
turn it on again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Specifications  
DX-40L261A12  
Inputs  
Specifications  
DX-40L261A12  
Specifications are subject to change without notice.  
HDMI 1.3  
2 (side)  
Warranty  
E-EDID compliant  
HDCP compliant  
DX-40L261A12  
Component video  
Composite video  
Shared audio  
(component and  
composite)  
1 (side)  
1 (side)  
No  
Parts: 1 year  
Labor: 1 year  
Dimensions and weight  
S-Video  
PC/VGA  
3.5mm PC audio input  
USB  
No  
DX-40L261A12  
1 (side)  
1 (side)  
1 (side)  
Without stand:  
38.58 × 24.41 × 4.17 in.  
(98 × 62 × 10.6 cm)  
Support firmware  
upgrade only  
With stand:  
38.58 × 26,73 × 11.22 in.  
(98 × 67.9 × 28.5 cm)  
Without stand:  
30.87 lbs. (14 kg)  
With stand:  
Outputs  
DX-40L261A12  
Video  
No  
34.1 lbs. (15.5 kg)  
Analog audio  
Digital audio  
WiFi  
No  
1 (side)  
No  
Screen  
Ethernet  
Headphone  
No  
1 (side)  
DX-40L261A12  
Screen size measured  
diagonally  
Display type  
40"  
Audio  
LCD  
Panel 60 Hz vs.120 Hz  
Display resolution  
Panel resolution  
Aspect ratio  
60Hz  
1080p  
1920 (H) × 1080 (V)  
16:9  
DX-40L261A12  
Simulated Surround  
Sound  
Sound Leveler  
Yes  
Yes  
Contrast ratio  
(typical)–panel  
2000:1  
Power  
Brightness (center  
typical) cd/m2  
Comb filter  
Response time  
Horizontal viewing angle 178  
Vertical viewing angle 178  
400 nits  
DX-40L261A12  
Power consumption  
Power input  
On: 165 W  
Standby: <1 W  
120V/60Hz  
3d y/c digital  
8 ms  
Miscellaneous  
Display resolutions/VGA scan rates  
DX-40L261A12  
OSD languages  
INlink  
Game Mode  
ENERGY STAR qualified No  
Internet connectable  
TV base screws  
English, French, Spanish  
No  
No  
DX-40L261A12  
HDMI 1.3  
Suggested Resolutions:  
1080p, 1080i, 720p, 480p,  
480i  
Component video Suggested Resolutions:  
1080i, 720p, 480p, 480i  
No  
M6 type (12 mm length)  
(4 pcs)  
Yes  
Yes  
No  
PC/VGA  
Suggested scan rates:  
640 × 480/60Hz,  
V-Chip (version 2.0)  
Sleep timer  
Channel labeling  
VESA mount (mm)  
(horizontal × vertical)  
800 × 600/60Hz,  
1024 × 768/60Hz,  
1920 × 1080/60Hz  
400 × 200  
Tuner  
DX-40L261A12  
Note  
Analog  
Digital  
NTSC  
The length of the wall-mount screws vary depending  
on the wall-mount bracket you purchased. See the  
instructions that came with the wall-mount bracket  
for screw lengths.  
ATSC, 8-VSB, Clear-QAM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
34  
DX-40L261A12  
Programming universal remote controls  
Programming universal remote  
controls  
Set-top box makes and models  
068, 069, 078, 096, 100, 164, 168, 229,  
026  
Cablevision  
Charter  
Programming a universal remote control  
2002, 1204, 1423, 1517, 0171, 1963,  
0463, 1463, 0842, 1326, 167, 415, 424,  
450, 456, 461, 507, 523, 567, 577, 586  
You can operate your Dynex TV with a new or existing universal remote  
control.  
To program a different universal remote control:  
10171, 11204, 11326, 11463, 11517,  
11641, 11780, 11785, 11892, 11963,  
12002  
1
See the table below for common codes. If you have problems  
programming your remote or need a different remote control  
remote control code information.  
Comcast  
Cox  
1326, 1463  
2
Follow your universal remote control’s instructions to enter the  
TV code you found in Step 1.  
10171, 11204, 11326, 11517, 11564,  
11641, 11963, 12002  
DirectTV  
Tips  
Dish Network  
Time Warner  
TiVo  
720  
If your universal remote control has a code  
search feature, run a code search to identify a  
code that matches your TV. See your universal  
remote control’s instructions for details.  
If your universal remote control has a “Learn”  
feature, you can manually program it using the  
Dynex TV remote to “teach” the commands one  
at a time. See your universal remote control’s  
instructions for details.  
400, 450, 461, 456, 10463, 1463, 0463  
0091  
Verizon  
0198, 0490  
Tips  
The brand name is often visible on the front of  
the universal remote control, and the model  
number is often visible on the back.  
If your universal remote control isn’t listed on  
the chart, refer to your universal remote  
control’s instructions and try codes for the  
brands Orion, Emerson, Memorex, Sansui,  
Sylvania, or Zenith. You may need to try several  
codes before finding a match.  
For additional help and information…  
2. Call technical support for the universal remote control or  
cable/satellite company of the remote/set-top box you are trying to  
program.  
3. Call the Dynex Customer Care Center 1-800-305-2204  
Common universal remote control codes  
The following is a list of the most common remote control codes. Codes  
for other remote controls are available online at:  
provide for the remote control code.  
Dynex TV codes for universal remote controls (for all  
Dynex TVs manufactured after Jan. 1, 2007)  
Universal remote control makes and models  
One for All  
Phillips  
RCA  
0054  
0198, 0490  
135  
068, 069, 078, 096, 100, 164, 168, 229,  
026  
Sony  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
35  
Legal notices  
DX-40L261A12  
Legal notices  
FCC Part 15  
This device complies with Part 15 of the FCC Rules. Operation of this product is subject  
to the following two conditions: (1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may  
cause undesired operation.  
This equipment has been tested and found to comply within the limits for a class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC warning  
Changes or modifications not expressly approved by the party responsible for  
compliance with the FCC Rules could void the user’s authority to operate this  
equipment.  
Cables  
Connections to this device must be made with shielded cables with metallic RF/EMI  
connector hoods to maintain compliance with FCC Rules and Regulations.  
Canada ICES-003 statement  
This Class B digital apparatus complies with Canadian ICES-003.  
Standard Television Receiving Apparatus — Appareil de réception télévision ordinaire,  
Canada BETS-7 / NTMR-7  
Dolby License Notice and Trade Mark  
Acknowledgement  
Manufactured under license from Dolby Laboratories. Dolby and  
the double-D symbol are trademarks of Dolby Laboratories.  
HDMI  
HDMI, the HDMI logo, and High-Definition Multimedia  
Interface are trademarks or registered trademarks of HDMI  
Licensing LLC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
36  
DX-40L261A12  
Legal notices  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Legal notices  
DX-40L261A12  
Loss or Theft of this product or any part of the product  
One-year limited warranty -  
Dynex Televisions  
Up to three (3) pixel failures (dots that are dark or incorrectly illuminated)  
grouped in an area smaller than one tenth (1/10) of the display size or up to five  
(5) pixel failures throughout the display. (Pixel based displays may contain a  
limited number of pixels that may not function normally.)  
Failures or Damage caused by any contact including but not limited to liquids,  
gels or pastes.  
Definitions:  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE  
REMEDY FOR BREACH OF WARRANTY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL  
OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED  
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF  
USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO  
OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND  
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY  
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH  
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE  
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO  
PROVINCE.  
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new  
Dynex-branded television (“Product”), that the Product shall be free of defects in the  
original manufacturer of the material or workmanship for a period of one (1) year from  
the date of your purchase of the Product (“Warranty Period”). For this warranty to apply,  
your Product must be purchased in the United States or Canada from a Best Buy or  
Future Shop authorized dealer of Dynex brand products only that are packaged with this  
warranty statement.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the date you purchased the  
Product. Your purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
Contact Dynex:  
For customer service please call 1-800-305-2204  
During the Warranty Period, if the original manufacture of the material or workmanship  
of the Product is determined to be defective by an authorized Dynex repair center or  
store personnel, Dynex will (at its sole option): (1) repair the Product with new or  
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable  
products or parts. Products and parts replaced under this warranty become the property  
of Dynex and are not returned to you. If service of Products or parts are required after  
the Warranty Period expires, you must pay all labor and parts charges. This warranty  
lasts as long as you own your Dynex Product during the Warranty Period. Warranty  
coverage terminates if you sell or otherwise transfer the Product.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2011 BBY Solutions, Inc.  
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some  
countries. All other products and brand names are trademarks of their respective  
owners.  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail store location and your  
television Product has a screen size of less than 37 inches, please take your original  
receipt and the Product to any Best Buy or Future Shop store. Make sure that you place  
the Product in its original packaging or packaging that provides the same amount of  
protection as the original packaging. If you purchased the Product from a Best Buy or  
Future Shop online web site, mail your original receipt and the Product to the address  
listed on the web site. Make sure that you put the Product in its original packaging or  
packaging that provides the same amount of protection as the original packaging.  
To obtain in-home warranty service for a television with a screen 37 inches or larger, in  
the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call  
1-800-663-2275. Call agents will diagnose and correct the issue over the phone or will  
have a Dynex-approved repair technician dispatched to your home.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the product in the United States  
and Canada at Best Buy or Future Shop branded retail stores or websites.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as power surges  
Accident(s)  
Misuse  
Abuse  
Negligence  
Commercial purposes/use, including but not limited to use in a place of business  
or in communal areas of a multiple dwelling condominium or apartment  
complex, or otherwise used in a place of other than a private home.  
Modification of any part of the Product, including the antenna  
Plasma display panel damaged by static (non-moving) images applied for  
lengthy periods (burn-in).  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Dynex to service the Product  
Products sold “as is” or “with all faults”  
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)  
Products where the factory applied serial number has been altered or removed  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
US and Canada Market - (800) 305-2204  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.  
© 2011 BBY Solutions, Inc. All rights reserved.  
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and  
brand names are trademarks of their respective owners.  
ENGLISH  
11-0396  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Continental Kitchen Grill CM43505 User Manual
Craftsman Lawn Mower 28903 User Manual
Craftsman Pressure Washer 580751781 User Manual
Delta Electronics Network Card VFD USB01 User Manual
Dukane Projector 8918 User Manual
Eclipse Fujitsu Ten Car Stereo System CD5435 User Manual
Edelbrock Automobile Parts 2001 PT Cruiser User Manual
FEIN Power Tools Dust Collector 9 88 35 User Manual
Fisher Paykel Ventilation Hood HT90DBX1 User Manual
Garmin Car Stereo System 695 User Manual