Dynex Flat Panel Television DX 19L200A12 User Manual
19" LCD TV  
DX-19L200A12  
IMPORTANT INFORMATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
CHILD SAFETY  
DX-19L200A12  
CHILD SAFETY  
It makes a difference how and where you use  
your flat panel display  
As you enjoy your new product, keep these  
safety tips in mind  
The issue  
The home theater entertainment experience is a growing trend, and larger TVs are popular  
purchases. However, TVs are not always supported on the proper stands or installed  
according to the manufacturer’s recommendations. We and the consumer electronics  
industry are committed to making home entertainment enjoyable and safe.  
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,  
chests, or carts may fall over and cause injury.  
Tune into safety  
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand  
rated for the weight of your TV.  
Carefully read and understand all enclosed instructions for  
proper use of this product.  
Don’t let children climb on or play with entertainment system  
furniture and TVs.  
Don’t place TVs on furniture that can easily be used as  
steps, such as a chest of drawers.  
Remember that children can become excited while watching  
a program, especially on a “larger-than-life” TV. Make sure  
that you place or install the TV where it cannot be pushed,  
pulled over, or knocked down.  
•
Make sure that you route all cords and cables so that they  
cannot be pulled or grabbed by curious children.  
Wall mounting  
If you decide to wall mount your TV, always remember:  
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your  
TV and that has been recommended by this TV manufacturer, listed in this manual, or  
otherwise listed by an independent laboratory as suitable for your TV.  
•
•
Follow all instructions supplied by the TV and wall mount manufacturers.  
If you have any doubts about your ability to safely wall mount your TV, get help from a  
professional installer.  
•
Make sure that the wall where you are mounting the TV is  
appropriate. Some wall mounts are not designed to be mounted  
to walls backed with steel studs or cinder blocks. If you are  
unsure, ask a professional installer.  
•
TVs can be heavy. At least two people are required for safe wall mount installation.  
This apparatus is intended to be supported by a UL listed Wall Monunt bracket, marked with  
the minimum loading weight of 7.1 lbs (3.2 kg).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
DX-19L200A12  
Important safety instructions  
18 The apparatus should not be exposed to dripping or splashing,  
and no objects filled with liquids, such as vases, should be placed  
on the apparatus.  
Important safety instructions  
Warnings  
Electric shock hazard  
To reduce the risk of fire or electric shock, do not remove any cover or  
expose the device to rain or moisture. No user-serviceable parts are  
inside. Refer servicing to qualified service technicians.  
This symbol indicates that dangerous  
voltage constituting a risk of electric  
shock is present within your TV. This  
label is located on the back of your TV.  
Lightning  
For added protection for your device receiver during a lightning storm,  
or when it is left unattended and unused for long periods of time,  
unplug it from the power outlet and disconnect any antenna or cable  
system. This helps prevent property damage and personal injury from  
lightning and power line surges.  
This symbol indicates that there are  
important operating and maintenance  
instructions in the literature  
accompanying your TV.  
1
2
3
4
5
6
7
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with a dry cloth.  
Power lines  
An outside antenna system should not be located in the vicinity of  
overhead power lines or other electric light or power circuits, or where it  
can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching  
such power lines or circuits as contact with them might be fatal.  
Do not block any ventilation openings. Install in accordance with  
the manufacturer's instructions.  
Handling the LCD panel  
8
9
Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers) that  
produce heat.  
Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with one  
wider than the other. A grounding type plug has two blades and  
a third grounding prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does not fit into  
your outlet, consult an electrician for replacement of the obsolete  
outlet.  
• Your TV’s screen is made of glass. Do not drop your TV or hit, jolt,  
or press hard against the LCD panel. If the screen breaks, be  
careful of broken glass.  
• If the LCD panel is broken, make absolutely sure that you do not  
touch the liquid in the panel. This may cause skin inflammation.  
• If the liquid gets in your mouth, immediately gargle, rinse, and  
consult with your doctor. Also, if the liquid gets in your eyes or  
touches your skin, consult with your doctor after rinsing for at  
least 15 minutes or longer in clean water.  
Replacement parts  
10 Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
When replacement parts are required, make sure that the service  
technician uses replacement parts specified by the manufacturer that  
have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, personal injury, or other  
hazards.  
11 Only use attachments/accessories specified by the manufacturer.  
12 Use only with a cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid  
injury from tip-over.  
Safety check  
After completing any service or repair to this device, ask the service  
technician to perform routine safety checks to determine that your TV is  
in correct operating condition.  
13 Unplug this apparatus during lightning storms or when unused  
for long periods of time.  
Power source  
14 Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has  
been dropped.  
Operate your TV only from the type of power source indicated on the  
marking label. If you are not sure of the type of power supplied to your  
home, consult an electrician or your local power company.  
Cautions  
Damage requiring service  
15 The wall plug is the disconnecting device. The plug must remain  
readily operable.  
Unplug this TV from the power outlet and refer servicing to qualified  
service personnel under the following conditions:  
16 An apparatus with a three-prong, grounding-type plug is a Class I  
apparatus, which needs to be grounded to prevent possible  
electric shock. Make sure that you connect this Class I television  
to a grounding-type, three-prong outlet.  
• When the power supply cord or plug is damaged or frayed.  
• If liquid has been spilled or objects have fallen into your TV.  
• If your TV has been exposed to rain or water.  
17 Remote control batteries should not be exposed to excessive heat  
such as sunshine, fire, or the like.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3
Online User Manual  
DX-19L200A12  
• If your TV does not operate normally by following the operating  
End of life directives  
instructions. Adjust only those controls that are covered by the  
operating instructions because incorrect adjustment of other  
controls may result in damage and will often require extensive  
work by a qualified technician to restore your TV to its normal  
operation.  
Your TV contains tin-lead solder. Disposal of this material may be  
regulated for environmental reasons. Your TV also contains material  
that can be recycled and reused. For disposal or recycling information,  
contact your local authorities or the Electronic Industries Alliance at  
www.eia.org to find a recycler in your area.  
• If your TV has been dropped or damaged in any way.  
• When your TV exhibits a distinct change in performance.  
Non-active pixels  
Outdoor antenna grounding  
The LCD panel contains almost 3 million thin film transistors, which  
provide exceptionally sharp video quality. Occasionally, a few  
non-active pixels may appear on the screen as a fixed blue, green, or red  
point. These non-active pixels do not adversely affect the performance  
of your TV, and are not considered defects.  
If an outside antenna or cable system is connected to your TV, make sure  
that the antenna or cable system is grounded to provide some  
protection against voltage surges and built-up static charges. Article  
810 of the National Electrical Code, ANSI/NFPA No. 70, provides  
information with respect to correct grounding of the mast and  
supporting structure, grounding of the lead-in wire to an antenna  
discharge unit, size of grounding conductors, location of the  
antenna-discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode.  
Online User Manual  
WE ARE GOING GREEN! For the full user manual, go to  
www.dynexproducts.com and click Support & Service. Enter your  
model number in the Product Search field, then click Search.  
1
2
Troubleshooting  
3
4
Warning  
5
Do not try to repair your TV yourself. Contact  
authorized service personnel.  
7
6
Video and audio  
Antenna lead-in wire  
1
Problem  
Solution  
Grounding clamp  
2
Picture does not fill the  
screen. There are black bars  
around the picture.  
•
Change the aspect ratio. An increasing amount of digital  
TV and movies are presented in wide screen (16:9). See  
Antenna discharge unit  
3
“Adjusting the TV picture” in the online User Guide.  
Grounding conductors  
4
No picture (screen is not lit)  
and no sound.  
•
•
Press POWER on the TV or the remote control.  
Make sure that the video cables are connected securely  
to the back of your TV.  
Ground clamps  
5
•
Adjust the contrast and brightness. See “Adjusting the  
TV picture” in the online User Guide.  
Power service grounding electrode system  
6
•
•
Make sure that the power cord is plugged in.  
Make sure that the correct video input source is  
selected. See “Selecting the video input source” in the  
online User Guide.  
Try another channel. The station may be experiencing  
problems.  
Make sure that the incoming signal is compatible.  
Make sure the antenna or cable TV is connected  
correctly and securely. See “Connecting a cable or  
satellite box” or “Connecting an antenna or cable TV (no  
box)” in the online User Guide.  
Check the closed caption settings. Some TEXT modes  
can block the screen.  
Electric service equipment  
7
Note to CATV system installer  
•
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides  
guidance for correct grounding. Specifically, it states that the cable  
ground must be connected to the grounding system of the building as  
close to the point of cable entry as practical.  
•
•
Condensation  
•
Moisture will form on the TV if the TV is brought from cool surroundings  
into a warm room or if the temperature of the room rises suddenly.  
When this happens, the TV's performance may be impaired. To prevent  
this, let the TV stand in its new surroundings for about an hour before  
switching it on, or make sure that the room temperature rises gradually.  
Condensation may also form during the summer if the TV is exposed to  
the breeze from an air conditioner. In such cases, change the location of  
the TV.  
Picture quality is good on  
some channels and poor on  
others. Sound is good.  
•
•
The problem may be caused by a poor or weak signal  
from the broadcaster or cable TV provider.  
If you connect to cable or satellite TV without a set-top  
box and experience poor picture quality, you may need  
to install a set-top box to improve signal reception and  
picture quality. Contact your cable or satellite TV  
provider about upgrading to a set-top box.  
Mobile telephone warning  
To avoid interference with your TV picture and sound, operating  
problems, or even damage, keep your cordless and cellular telephones  
away from the TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4
DX-19L200A12  
Troubleshooting  
Problem  
Solution  
Problem  
Solution  
Dark, poor, or no picture  
(screen is lit), but sound is  
good.  
Dotted lines or stripes  
appear on the screen.  
•
•
Try another channel. The station may be experiencing  
problems.  
•
•
•
Make sure that the antenna or cable TV is connected  
correctly and securely. See “Connecting a cable or  
satellite box” or “Connecting an antenna or cable TV (no  
box)” in the online User Guide.  
If you are using an antenna, the digital channel signal  
strength may be low. To check the digital channel signal  
strength, see “Checking the digital signal strength” in  
the online User Guide.  
If you are using an antenna and the signal strength is  
low, adjust the antenna or use a highly directional  
outdoor antenna or set-top antenna with a built-in  
amplifier.  
Make sure that the video cables are connected securely  
to the back of your TV.  
The video cable(s) you are using may be bad. Try a new  
set.  
Other devices (for example, surround sound receiver,  
external speakers, fans, or hair dryers) may be  
interfering with your TV. Try turning off one device at a  
time to determine which device is causing interference.  
Once you have determined which device is causing  
interference, move it further from the TV to eliminate  
the interference.  
Make sure that the antenna or cable TV is connected  
correctly and securely. See “Connecting a cable or  
satellite box” or “Connecting an antenna or cable TV (no  
box)” in the online User Guide.  
•
•
•
Adjust the brightness. See “Adjusting the TV picture” in  
the online User Guide.  
Make sure that the correct picture mode is selected. See  
“Adjusting the TV picture” in the online User Guide.  
If you are using an antenna, the digital channel signal  
strength may be low. To check the digital channel signal  
strength, see “Checking the digital signal strength” in  
the online User Guide.  
•
•
•
•
If you are using an antenna and the signal strength is  
low, adjust the antenna or use a highly directional  
outdoor antenna or set-top antenna with a built-in  
amplifier.  
Make sure that the video cables are connected securely  
to the back of your TV.  
The video cable(s) you are using may be bad. Try a new  
set.  
•
•
No color, dark picture, or  
color is not correct.  
•
•
•
•
Try another channel. The station may be experiencing  
problems.  
Double images.  
•
•
Use a highly directional outdoor antenna, cable TV, or  
satellite TV.  
Adjust the color saturation. See “Adjusting the TV  
picture” in the online User Guide.  
The picture has a few bright  
or dark spots.  
Make sure that the video cables are connected correctly  
and securely to the back of your TV.  
A few bright or dark spots on an LCD screen is normal. It  
does not affect the operation of this TV.  
Make sure that the antenna or cable TV is connected  
correctly and securely. See “Connecting a cable or  
satellite box” or “Connecting an antenna or cable TV (no  
box)” in the online User Guide.  
Good picture, but no sound.  
•
•
•
•
•
Increase the volume.  
Unplug the headphones.  
Make sure that the sound is not muted.  
Make sure that the correct audio mode is selected.  
Make sure that the audio cables are connected correctly  
and securely to the back of your TV.  
Make sure that the antenna or cable TV is connected  
correctly and securely. See “Connecting a cable or  
satellite box” or “Connecting an antenna or cable TV (no  
box)” in the online User Guide.  
If you are using an antenna, the digital channel signal  
strength may be low. To check the digital channel signal  
strength, see “Checking the digital signal strength” in  
the online User Guide.  
The audio cable(s) you are using may be bad. Try a new  
set.  
•
•
If you are using an antenna, the digital channel signal  
strength may be low. To check the digital channel signal  
strength, see “Checking the digital signal strength” in  
the online User Guide.  
If you are using an antenna and the signal strength is  
low, adjust the antenna or use a highly directional  
outdoor antenna or set-top antenna with a built-in  
amplifier.  
•
•
Only snow (noise) appears  
on the screen.  
•
•
Try another channel. The station may be experiencing  
problems.  
Make sure that the antenna or cable TV is connected  
correctly and securely. See “Connecting a cable or  
satellite box” or “Connecting an antenna or cable TV (no  
box)” in the online User Guide.  
If you are using an antenna, the digital channel signal  
strength may be low. To check the digital channel signal  
strength, see “Checking the digital signal strength” in  
the online User Guide.  
If you are using an antenna and the signal strength is  
low, adjust the antenna or use a highly directional  
outdoor antenna or set-top antenna with a built-in  
amplifier.  
•
•
•
Poor picture  
Make sure that the room is not too bright. Light  
reflecting off the screen can make the picture difficult to  
see.  
If an S-VHS camera or a camcorder is connected while  
another connected device is turned on, the picture may  
be poor. Turn off one or more devices.  
•
•
Good sound but poor color  
Audio noise  
•
•
Adjust the contrast, color, and brightness settings.  
Other devices (for example, surround sound receiver,  
external speakers, fans, or hair dryers) may be  
interfering with your TV. Try turning off one device at a  
time to determine which device is causing interference.  
Once you have determined which device is causing  
interference, move it further from the TV to eliminate  
the interference.  
No output from one of the  
speakers  
•
•
Adjust the audio balance. See “Adjusting sound  
settings” in the online User Guide.  
Make sure that the audio cables are connected correctly  
and securely to the back of your TV.  
After images appear  
•
Do not display a still image, such as a logo, game, or  
computer image, for an extended period of time. This  
can cause a permanent after-image to be burned into  
the screen. This type of damage is not covered by your  
warranty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Maintenance  
DX-19L200A12  
Remote control  
Problem  
Solution  
TV cabinet creaks.  
Problem  
Solution  
•
When the TV is in use, the temperature rises naturally and  
may cause the cabinet to expand or contract which can  
cause a creaking noise. This is not a malfunction.  
Remote control does not  
work.  
•
•
Make sure that the power cord is correctly connected to  
your TV and a power outlet.  
TV keeps turning off  
Make sure that there are no obstructions between the  
remote control and the remote control sensor on the  
front of the TV.  
•
Make sure that the sleep timer is not turned on. See  
“Setting the sleep timer” in the online User Guide.  
•
•
•
Point the remote control directly at the remote control  
sensor on your TV. For the location of the remote control  
sensor, see “Front” in the online User Guide.  
Make sure that the batteries are installed correctly. See  
“Installing remote control batteries” in the online User  
Guide.  
Replace dead batteries with new batteries. See  
“Installing remote control batteries” in the online User  
Guide.  
Note  
If the problem is not solved by using these  
troubleshooting instructions, turn off your TV, then  
turn it on again.  
Maintenance  
Trouble programming your  
existing universal remote  
control.  
•
See instructions and a table of common codes in  
“Programming a different universal remote control” in  
the online User Guide.  
Codes are subject to change. For up to date codes, go to  
www.dynexproducts.com/remotecodes.  
Replace dead batteries with new batteries. See  
“Installing remote control batteries” in the online User  
Guide.  
Cleaning  
•
•
• Clean your TV with a soft, dry cloth. If surfaces are extremely  
dirty, use a soft cloth dampened with a weak detergent solution.  
• Use an eyeglass cleaner to clean the screen. Never use alcohol,  
paint thinner, or benzine.  
•
Refer to the User Guide that accompanied your  
universal remote control and contact the manufacturer  
if problems persist.  
• Before using a chemically treated cloth, read the instructions that  
came with the cloth.  
General  
Problem  
Solution  
No power  
•
•
•
Make sure that the power cord is correctly connected to  
your TV and a power outlet.  
Unplug the power cord, wait 60 seconds, then plug the  
cord back in and turn on your TV.  
Other devices (for example, surround sound receiver,  
external speakers, fans, or hair dryers) may be interfering  
with your TV. Try turning off one device at a time to  
determine which device is causing interference. Once you  
have determined which device is causing interference,  
move it further from the TV to eliminate the interference.  
“No signal” error  
message is displayed  
•
•
•
Press INPUT and make sure that you have selected the  
correct input for the device or service you are trying to use.  
If you are using a cable or satellite box, use the remote that  
came with that box to change channels.  
Make sure you have the correct input selected to view  
channels from the cable or satellite box.  
After Auto Channel  
Search, there are no  
channels  
•
Reception can vary by channel depending on the broadcast  
power level of a given station. Contact your cable or  
satellite TV provider.  
•
•
Make sure the antenna or cable/satellite TV is connected  
securely to your TV.  
Try replacing the cable between the antenna/cable or  
cable/satellite box and your TV.  
One or more channels  
do not display.  
•
Make sure that the channels are not hidden. The channel  
may have been deleted from the channel list. You can tune  
to the channel by pressing the number buttons or you can  
add the channel back to the channel list. See “Hiding  
channels” in the online User Guide.  
•
•
•
If you are using a cable or satellite box, use the remote that  
came with that box to change channels.  
Make sure you have the correct input selected to view  
channels from the cable or satellite box.  
If you are using an antenna, the digital channel signal  
strength may be low. To check the digital channel signal  
strength, see “Checking the digital signal strength” in the  
online User Guide.  
Some settings cannot be  
accessed.  
•
If a setting is skipped, the setting is not available in the  
current video input mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
6
DX-19L200A12  
Specifications  
USB  
Yes - for firmware  
upgrade only  
Specifications  
Specifications are subject to change without notice.  
Outputs  
Warranty  
Video  
No  
No  
1 (back)  
No  
No  
1 (back)  
Parts: 1 year  
Labor: 1 year  
Analog audio  
Digital audio  
WiFi  
Ethernet  
Headphone  
Dimensions and weight  
Without stand:  
18.58 × 12.91 × 2.52 in.  
(47.2 × 32.8 × 6.4 cm)  
With stand:  
18.58 × 14.25 × 6.85 in.  
(47.2 × 36.2 × 17.4 cm)  
Audio  
Power  
Simulated Surround Sound  
Sound Leveler  
Watts/channel  
Yes  
No  
2W x 2  
2
Without stand:  
6.9 lbs. (3.1 kg)  
With stand:  
Number of speakers  
7.1 lbs. (3.2 kg)  
Power consumption  
Power input  
On: 29W  
Standby: 0.3W  
120V/60Hz  
Screen  
?
Screen size measured  
18.5"  
diagonally  
Miscellaneous  
Display type  
LCD  
60Hz  
720p  
Panel 60 Hz vs.120 Hz  
Display resolution  
Panel resolution  
Aspect ratio  
Contrast ratio (typical)–panel  
Brightness (center typical)  
cd/m2  
OSD languages  
INlink  
Game Mode  
ENERGY STAR qualified  
Internet connectable  
TV base screws  
English, French, Spanish  
No  
No  
Yes  
No  
1366 (H) × 768 (V)  
16:9  
1000:1  
210 nits  
M3 × 8mm (2 pcs)  
M4 × 25mm (2 pcs)  
Comb filter  
Response time  
Horizontal viewing angle  
Vertical viewing angle  
3d y/c digital  
5ms (Tr + TF)  
170  
Sleep timer  
Yes  
Yes  
100 × 100  
Channel labeling  
VESA mount (mm)  
(horizontal × vertical)  
160  
Display resolutions/VGA scan rates  
Note  
The length of the wall-mount screws vary depending  
on the wall-mount bracket you purchased. See the  
instructions that came with the wall-mount bracket  
for screw lengths.  
HDMI  
Suggested Resolutions: 1080p,  
1080i, 720p, 480p, 480i  
Suggested Resolutions: 1080i,  
720p, 480p, 480i  
Suggested scan rates:  
VGA: 640 × 480 60/72/75Hz  
Component video  
PC/VGA  
VGA: 720 × 400 70Hz  
SVGA: 800 × 600 56/60/72/75Hz  
XGA: 1024 × 768 60/70/75Hz  
WXGA: 1280 768 60Hz  
×
WXGA: 1280 × 720 60Hz  
WXGA: 1360 × 768 60Hz  
Tuner  
Analog  
Digital  
NTSC  
ATSC, 8-VSB, Clear-QAM  
Inputs  
HDMI/DVI  
1 (back)  
E-EDID compliant  
HDCP compliant  
Component video  
Composite video  
Shared audio (component  
and composite)  
1 (back)  
1 (back)  
Yes  
S-Video  
No  
PC/VGA  
3.5mm PC audio input  
1 (back)  
1 (back)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7
Legal notices  
DX-19L200A12  
Dolby Laboratories  
Legal notices  
Manufactured under license from Dolby  
FCC Part 15  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
This device complies with Part 15 of the FCC Rules. Operation of this  
product is subject to the following two conditions: (1) this device may  
not cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply within the limits  
for a class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
• Consult the dealer or an experienced technician for help.  
FCC warning  
Changes or modifications not expressly approved by the party  
responsible for compliance with the FCC Rules could void the user’s  
authority to operate this equipment.  
Cables  
Connections to this device must be made with shielded cables with  
metallic RF/EMI connector hoods to maintain compliance with FCC  
Rules and Regulations.  
Canada ICES-003 statement  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numerique de la classe B est conforme a la norme NMB-003  
du Canada.  
Standard Television Receiving Apparatus — Appareil de réception  
télévision ordinaire, Canada BETS-7 / NTMR-7  
HDMI  
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing LLC in the  
United States and other countries.  
Energy Star  
Please keep the factory default settings as shipped, in which the  
product can meet Energy Star requirements.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8
DX-19L200A12  
Legal notices  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Legal notices  
DX-19L200A12  
•
•
Up to three (3) pixel failures (dots that are dark or incorrectly illuminated)  
One-year limited warranty -  
Dynex Televisions  
grouped in an area smaller than one tenth (1/10) of the display size or up to five  
(5) pixel failures throughout the display. (Pixel based displays may contain a  
limited number of pixels that may not function normally.)  
Failures or Damage caused by any contact including but not limited to liquids,  
gels or pastes.  
Definitions:  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE  
REMEDY FOR BREACH OF WARRANTY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL  
OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED  
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF  
USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO  
OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND  
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY  
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH  
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE  
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO  
PROVINCE.  
Dynex Products ("Dynex") warrants to you, the original purchaser of this new  
Dynex-branded television ("Product"), that the Product shall be free of defects in the  
original manufacturer of the material or workmanship for a period of one (1) year from  
the date of your purchase of the Product ("Warranty Period"). For this warranty to apply,  
your Product must be purchased in the United States or Canada from a Best Buy or  
Future Shop authorized dealer of Dynex brand products only that are packaged with this  
warranty statement.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the date you purchased the  
Product. Your purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
Contact Dynex:  
During the Warranty Period, if the original manufacture of the material or workmanship  
of the Product is determined to be defective by an authorized Dynex repair center or  
store personnel, Dynex will (at its sole option): (1) repair the Product with new or  
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable  
products or parts. Products and parts replaced under this warranty become the property  
of Dynex and are not returned to you. If service of Products or parts are required after  
the Warranty Period expires, you must pay all labor and parts charges. This warranty  
lasts as long as you own your Dynex Product during the Warranty Period. Warranty  
coverage terminates if you sell or otherwise transfer the Product.  
For customer service please call 1-800-305-2204  
www.Dynexproducts.com  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2011 BBY Solutions, Inc.  
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some  
countries. All other products and brand names are trademarks of their respective  
owners.  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail store location and your  
television Product has a screen size of less than 37 inches, please take your original  
receipt and the Product to any Best Buy or Future Shop store. Make sure that you place  
the Product in its original packaging or packaging that provides the same amount of  
protection as the original packaging. If you purchased the Product from a Best Buy or  
Future Shop online web site, mail your original receipt and the Product to the address  
listed on the web site. Make sure that you put the Product in its original packaging or  
packaging that provides the same amount of protection as the original packaging.  
To obtain in-home warranty service for a television with a screen 37 inches or larger, in  
the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call  
1-800-663-2275. Call agents will diagnose and correct the issue over the phone or will  
have a Dynex-approved repair technician dispatched to your home.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the product in the United States  
and Canada at Best Buy or Future Shop branded retail stores or websites.  
What does the warranty not cover?  
This warranty does not cover:  
•
•
•
•
•
•
•
•
•
•
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as power surges  
Accident(s)  
Misuse  
Abuse  
Negligence  
Commercial purposes/use, including but not limited to use in a place of business  
or in communal areas of a multiple dwelling condominium or apartment  
complex, or otherwise used in a place of other than a private home.  
Modification of any part of the Product, including the antenna  
Plasma display panel damaged by static (non-moving) images applied for  
lengthy periods (burn-in).  
•
•
•
•
•
•
•
•
•
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Dynex to service the Product  
Products sold "as is" or "with all faults"  
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)  
Products where the factory applied serial number has been altered or removed  
Loss or Theft of this product or any part of the product  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
www.dynexproducts.com  
US and Canada Market - (800) 305-2204  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.  
© 2011 BBY Solutions, Inc. All rights reserved.  
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and  
brand names are trademarks of their respective owners.  
11-0945  
ENGLISH  
N
J3EZ0701ASH 11/08  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Code Alarm Automobile Alarm CA 430 User Manual
Cooper Lighting Indoor Furnishings 1463 User Manual
Crate Amplifiers Musical Instrument Amplifier KX 160 User Manual
Delta Electronics Power Supply HAH1378 User Manual
Delta Electronics Power Supply SIQ1250R User Manual
Dukane Projector 8766 User Manual
Edelbrock Automobile Parts 1797 User Manual
ETA Systems Surge Protector ETA S20 User Manual
Exido Toaster 243 031 User Manual
Garland Cooktop M48 23R User Manual