| 	
		 How to use this scale   
					PLEASE REMOVE PROTECTIVE RING BEFORE USING   
					BLACK   
					1. Place scale on a hard flat surface.   
					2. Turn scale on by pressing the "ON/TARE" touch pad. Wait for the   
					scale to read "0.0."   
					3. Choose lbs/oz or kg/g by pressing the "oz/g" touch pad.   
					4. Place item to be weighed on the center of the platform. Caution   
					should be taken not to exceed the total capacity of the scale.   
					"0ooo.o" indicates capacity has been exceeded.   
					5. The weight of the item will be displayed.   
					Digital Electronic Postal Scale   
					6. The scale will automatically shut off after 30 seconds or by   
					pressing the "OFF" touch pad.   
					Model SP5   
					Using the Tare feature   
					1. Follow steps 1-5 under How to use this scale.   
					2. Press the "ON/TARE" touch pad. Wait for the scale to read "0.0."   
					3. Place next item to be weighed onto the scale.   
					4. Only the weight of the next item will be displayed.   
					5. Repeat steps 2-4 for additional items. Caution should be taken   
					not to exceed the total capacity of the scale. "0ooo.o" indicates   
					capacity has been exceeded.   
					Note: "Low Battery" indicates the battery is weak and should be   
					replaced. "o" in the upper left corner of the digital display indicates a   
					stable reading has been attained and the scale is ready to use.   
					For questions or service regarding this scale, call:   
					1-800-638-3722, Mon. through Fri., 8:00 a.m. to 5:00 p.m. Central   
					Standard Time   
					Not Legal for Trade   
					Made to our exact specifications in China.   
					Capacity: 5 lb./2.2 kg.   
					Power Source: 9-volt battery (not included)   
					Comment utiliser cette balance   
					ENLEVER L’ANNEAU IRPROTECTEUR AVANT L’UTILISATION   
					NO   
					1. Poser la balance sur une surface plane.   
					2. Allumer la balance en appuyant sur la touche "ON/TARE." Attendre   
					que "0.0" se montre sur l’affichage.   
					3. Sélectionner le mode lbs/oz ou kg/g en appuyant sur la touche   
					"oz/g."   
					4. Placer l’objet à peser au centre de la plate-forme. Ne dépasser pas   
					la capacité de la balance. "0ooo.o" représente une surcharge de la   
					balance.   
					5. Le poids de l’objet sera affiché.   
					6. La balance s’éteint automatiquement après 30 secondes. Vous   
					pouvez également appuyer sur la touche "OFF" pour l’éteindre.   
					Balance Postale Numérique Electronique   
					Modèle SP5   
					Comment utiliser le dispositif Tare   
					1. Suivre les étapes de 1 à 5 ci-dessus ("Comment utiliser cette   
					balance").   
					2. Appuyer sur la touche "ON/TARE". Attendre que "0.0" se montre sur   
					l’affichage.   
					3. Placer le prochain objet à peser sur la balance.   
					4. L’affichage n’indique que le poids net du second objet.   
					5. Répéter les étapes de 2 à 4 pour peser des objets additionnels. Ne   
					dépasser pas la capacité de la balance. "0ooo.o" représente une   
					surcharge de la balance.   
					NB: "Low Battery" signifie que la pile est faible et doit être remplacée. "o"   
					apparaissant dans le coin gauche en haut de l’affichage indique que la   
					balance a atteint une lecture stable et que la balance est prête à utiliser.   
					Pour toute question concernant cette balance ou en cas de réparation,   
					appeler le: 1-800-638-3722, de lundi à vendredi,   
					8:00 a.m. à 5:00 p.m. Heure Standard du Centre   
					Capacité : 5 lb./2.2 kg.   
					Fonctionne sur : 1 pile 9V (non-incluse)   
					Non Légale pour le Commerce   
					Fabriquée à nos spécifications exactes en Chine.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |