CEF14
Charge Sizes: AA , AAA
Value Charger for NiMH Batteries
Technical
Class 2, Integrated Power Supply
Direct Plug-In Matches Local Requirements
NiMH: 2 or 4 AA/HR6, NiMH: 2 or 4 AAA/HR03
207 g
Battery Charger:
Plug:
Battery Type/Fit:
Typical Weight:
Input:
100-240V AC, 50-60 Hz, 7w
AA/HR6: 3.0V DC 360 mA
AAA/HR03: 3.0V DC 180 mA
Output:
0°C - 35°C (32°F - 95°F)
Operating Temp:
Dimensions:
123 mm (H) x 72 mm (W) x 42 mm (D)
BENEFITS Great Value, New Sleek & Compact Design, Convenient Wall Plug-In
FEATURES Independent Channel Charging
• Fully Charges cells in 6 hours*
• Charges both AA and AAA NiMH cells
• Ensures a full charge regardless of charge or battery capacity
LED Indicates Charge
• Red = Charging
• Green = Complete
• Flashing Red = Error/Abnormal battery or abnormal temperature
Maintenance Charge Keeps Cells Fresh
International Charge Capability- device can be used worldwide with suitable converter plug
SAFETY
Microprocessor Controlled
• Charge termination based on –dV/dt, temperature, and/or built-in timer
• Over-temperature shutoff- prevents overheat of cell
• Primary cell protection- will not charge non-rechargeable batteries
• Low voltage battery protection- prevents overheat and damage to cell
• Power protection circuit- resets whenever a battery is removed
BATTERIES
Berkshire Corporate Park
Bethel, CT 06801 U.S.A.
Tel: Toll free 1.800.544.5454
*Charge rate and time is dependent on cell capacity, discharge state, and operating temperature.
Information and contents in this data sheet are for reference purposes only. They do not constitute any warranty and representation is
subject to change without notice. For most current information and further details, please contact Duracell.
Document #: CH-A
Download from Www.Somanuals.com. All Manuals Search And Download.
|