Camera 335B
Visual Presenter
User’s Guide
UG335B122209V1
English - 0
Download from Www.Somanuals.com. All Manuals Search And Download.
7.8 Freezing Images...............................................................................18
off (Auto Erase) ............................................................................................19
Photo in Microsoft Word...............................................................................24
Chapter 10 Troubleshooting...........................................................................30
English - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Precautions
Always follow these safety instructions when setting up and using the Document Camera:
1. Please do not tilt the machine while using.
2. Do not place the Document Camera on an unstable trolley, stand or table.
3. Do not use the Document Camera near water or source of heat.
4. Use attachments only as recommended.
5. Use the type of power source indicated on the Document Camera. If you are not
sure of the type of power available, consult your dealer or local electricity company
for advice.
6. Place the Document Camera where it can be easily unplugged.
7. Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire.
„
„
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extensions leads or multi-way plug boards as this may
cause fire or electric shock.
9. Do not place the Document Camera where the cord can be stepped on as this may
result in fraying or damage to the lead or the plug.
10. Unplug the projector form the wall socket before cleaning. Use a damp cloth for
cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the case. They provide ventilation and
prevent the Document Camera from overheating. Do not place the Document
Camera on a sofa, rug or other soft surface or in a built-in installation unless proper
ventilation is provided.
12. Never push objects of any kind through cabinet slots. Never allow liquid of any kind
to spill into the Document Camera.
13. Except as specifically instructed in this User’s Manual, do not attempt to operate this
product by yourself. Opening or removing covers may expose you to dangerous
voltages and other hazards. Refer all servicing to licensed service personnel.
14. Unplug the Document Camera during thunderstorms or if it is not going to be used
for an extended period, do not place the Document Camera or remote control on top
of beat-emitting equipment or heated objects such as a car and etc.
15. In the following situations, unplug the Document Camera from the wall outlet and
refer servicing to licensed service personnel:
„ If the power cable or plug becomes damaged or frayed.
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
„ If liquid is spilled into it or the Document Camera has been exposed to rain or
water.
z Safety Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
This Document Camera has a 3-wire AC line Plug. This is a safety feature to ensure that
the plug will fit into the power outlet. Do not try to defeat this safety feature.
If the Document Camera will not be used for an extended time, unplug it from the power
outlet.
CAUTION
RISK OF ELECTRIC SHOCK
Caution: To reduce the risk of electric shock. Do not remove the cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel.
This symbol indicates that
dangerous voltage
This symbol indicates that
there are important operating
and maintenance instructions
in this User’s Manual with this
unit.
constituting a risk of electric
shock is present within this
unit.
z FCC Warning
This Document Camera has been certified to comply with the limits for a Class A computing
device, pursuant to Subpart J of Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against a harmful interference when the equipment is
operated in a commercial environment.
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Connecting to External Devices
4.2.1 Step 1: Connect the power cord from the AC In on the
Camera 335B to the power outlet
AC Outlet
<Note>: Appearance of the power cord may vary depending on
country/region.
4.2.2 Step 2: Connection projector with other hardware devices
¾ Connecting to a Projector or Monitor
z Connect the VGA cable from the VGA OUT port on the Camera 335B to
the VGA IN port on the projector or monitor.
¾ Connecting to a TV
1. Connect the C-VIDEO cable from the C-VIDEO port on the Camera
335B to the C-VIDEO port on the TV.
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Adjust DIP Switch Setting
„ NTSC: U.S.A., Taiwan, Panama, Philippine, Canada, Chile, Japan, Korea and
Mexico.
1
2
3
4
„ PAL: Country/region not listed above.
1
2
3
4
<Note> The on-screen display (OSD) is not available in C-VIDEO.
Some functions are not available on the control panel and the remote
control in this mode.
<Note> VGA OUT is not supported once C-VIDEO is enabled.
3. DIP switch settings will not available until the Camera 335B has been
restarted.
¾ Connecting to a Computer
1. Connect the USB cable from the USB port on the Camera 335B to the
USB port on the computer.
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connect the VGA cable from the VGA IN port on the Camera 335B to
the VGA OUT port on the computer.
3. Connect the RS-232 Adapter (Optional) to the RS-232 port on the
Camera 335B and the RS-232 port on the computer.
4.3 Getting Started
Control panel
Remote Control
z To turn on the Camera 335B with the remote control, aim at the
remote sensor at the Camera 335B and press the Power button.
z Once the Camera 335B is powered on, the LED on the projector will
flash a few times and then remain lit. Contact your distributor if the
LED fails to light.
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 DIP Switch
<Note>: You must restart the Camera 335B in order for DIP
switch configuration to take effect.
5.1 Connecting to a Projector or Monitor
5.1.1 SXGA output (factory default):
5.1.2 WXGA output
5.1.3 XGA output
5.1.4 Special mode
English - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Connecting to a TV
5.2.1 NTSC Settings: U.S.A., Taiwan, Panama, Philippines,
Canada, Chile, Japan, Korea, and Mexico
5.2.2 PAL Settings: Countries/regions not listed above
<Note> VGA OUT is not supported once C-VIDEO is enabled.
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 Introduction to Control Panel/
Remote Control Buttons and
On-Screen Menu
6.1 Functions of Control Panel and Remote Control Buttons
<Remark> The functions below are listed alphabetically
Name
Function Descriptions
Operation
Turns the visual presenter on and off.
Remote control /
Control panel
g,h,i,j
Moves up, down, left or right to select the
needed function.
Remote control /
Control panel
AF
Automatically adjusts the focal length
between the lens and the object being
projected.
Either side of the
unit’s lens
AUTO TUNE
Automatically adjusts to the optimal
brightness and focal length.
Remote Control
Remote Control
BRT+/-
Adjusts brightness of the image.
CAPTURE
Captures the image to the internal memory.
Remote control /
Control panel
DELETE
ENTER
FREEZE
MENU
Deletes images stored in the internal
memory.
Remote Control
Accesses/Activates functions.
Remote control /
Control panel
Freezes the current image temporarily on the Remote Control
screen. Press again to unfreeze.
Activates the on-screen menu/exits the
menu.
Remote control /
Control panel
PAN
PBP
Moves across part of the live image.
Remote Control
Remote Control
Allows users to compare live images with
captured image files.
PLAYBACK
Plays captured images.
Remote control /
Control panel
ROTATE
Rotates the image by 0°/90°/180°/270°
Plays the photos in a slide show.
Remote Control
Remote Control
SLIDE SHOW
SOURCE
Switches between different image sources:
1. Live images (default).
2. PC.
Remote control /
Control panel
ZOOM +/-
Increases or decreases image size.
Remote control /
Control panel
English - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 On-screen Menu
<Note> Press [Menu] on the remote control or control panel to enter the
on-screen menu, The bold underlined values in the following table are
defaults.
1st Level
Major
Items
2nd Level
Sub items
3rd Level
Adjustment Values
Function Descriptions
Press [ENTER] to automatically
adjust to the optimal brightness
and focal length.
Display
Auto Tune
Enter
Use the left and right arrow keys
to adjust focal length.
Focus
Mode
0~Max
Normal/Slide/Film/
Microscope
Use the left and right arrow keys
to select the image mode.
Use the left and right arrow keys
to select the photo/text/gray
mode.
Photo/Text
PBP
Photo/Text/Gray
Press [ENTER] to immediately
activate the image comparison
mode.
Enter
Use the left and right arrow keys
to move across the live image.
PAN
ON /OFF
Use the left and right arrow keys
to rotate the image.
Rotate
0°/90°/180°/270°
Press [ENTER] to play the photos
stored in the internal memory in
slide show mode.
Storage
Slide Show
Enter
Slide Show
Effect
Off/Shutter/Right/Down/ Use the left and right arrow keys
Side/Open
to select a page-flipping mode.
Use the left and right arrow keys
to select the timing of page flips.
(Select manual mode to switch
images manually.)
1 Sec/3 Sec/5 Sec/10
Sec/ Manual
Delay
Use the left and right arrow keys
to select desired image, and then
press [ENTER] to confirm the
deletion of the photo.
Delete All
Format
Yes/No
Yes/No
Use the left and right arrow keys
to select, and then format the
internal memory.
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the left and right arrow keys
to enable/disable the auto erase
function, which automatically
deletes all stored images upon
system shutdown.
Auto Erase
ON/OFF
Use the left and right arrow keys
to select the USB transfer mode.
USB Transfer Camera/Storage Device
Setting
Use the left and right arrow keys
to turn the lamp on/off.
Lamp
AE
ON /OFF
ON /OFF
Use the left and right arrow keys
to turn the Auto Erase (AE) on/off.
Press [ENTER] to activate
Automatic White Balance (AWB)
immediately.
AWB
Enter
Use the left and right arrow keys
to select the night vision mode.
Night Vision
ON /OFF
English/繁體中文
/Deutsch/Français/
Español/Русский/
Nederlands/Suomi/
Polski
Advance
Use the left and right arrow keys
to select the preferred language.
Language
Read the value of the current
image mode. Use the left and right
arrow keys to select, and then
confirm by pressing [ENTER].
Preset Load
Preset Save
Yes/No
Yes/No
Store the value of the current
image mode. Use the left and right
arrow keys to select, and then
confirm by pressing [ENTER].
Use the left and right arrow keys
to select, and then confirm by
pressing [ENTER] to restore
factory defaults.
Factory Reset Yes/No
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7 Descriptions of Major Functions
7.1 Switching Image Sources
Live image is the default image source. Press [SOURCE] on the remote
control or control panel to switch between image sources:
1. Live images (default).
2. PC.
7.2 Making Text Clearer and Photos More Colorful
Photo (Photo mode) is selected by default in the [Photo/Text/Gray] mode
z [Photo] (Default): View photos or text with photos in this mode to
enhance colors in photos.
z [Text]: View text files in this mode to make text clearer.
z [Gray]: View grayscale or black and white photos in this mode.
Change settings with the remote control or control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [f] or [e] to select [Display].
3. Press [d] to select among [Photo/Text/Gray] modes. (Refer to the
description above for the best choice).
4. Press [f] or [e] to move among [Photo/Text/Gray] modes.
5. Press [MENU] to exit.
7.3 Zoom in /out From an Image
1. Press [ZOOM+] on the remote control or control panel to zoom in to
an image.
2. Press [ZOOM-] on the remote control or control panel to zoom out
from an image.
7.4 Using Auto Focus
1. From the Control Panel, press the [FOCUS] button on the right side of
the lens.
7.5 Adjusting the Brightness
1. From the Remote Control or Control Panel, press [BRT+] to make it
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
brighter.
2. From the Remote Control or Control Panel, press [BRT-] to darken the
image.
7.6 Turning the Lamp on/off
From the remote control or control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [f] or [e] to select [Setting].
3. Press [d] to select [Lamp] modes.
4. Press [f] or [e] to turn [ON]/[OFF].
5. Press [MENU] to exit.
7.7 Automatically Adjusting the Image to Optimal
Brightness and Focal Length
From the remote control:
1. Press [AUTO TUNE] for the optimal brightness and focal length.
From the control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [f] or [e] to select [Display].
3. Press [d] to select among [Auto Tune] modes.
4. Press [ENTER].
5. Press [MENU] to exit.
7.8 Freezing Images
1. Press [FREEZE] on the remote control to freeze the current image on
the screen. Press again to unfreeze.
7.9 Capturing Images
1. Press [CAPTURE] on the remote control or control panel to capture
and save an image.
7.10 Browsing Captured Images
1. Press [PLAYBACK] on the remote control or control panel to display
thumbnails of all captured images.
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press [c] or [d] or [e] or [f] to select the thumbnail you want you
browse.
3. Press [ENTER] to access the full-screen display of the image.
4. Press [f] or [e] to browse the through saved images.
5. Press [PLAYBACK] to exit.
6. Press [MENU] to exit.
7.11 Deleting Captured Images
From the remote control:
1. Press [PLAYBACK].
2. Press [c] or [d] or [e] or [f] to select the desired thumbnail for deletion.
3. Press [DELETE] to delete the selected file.
4. Press [MENU] to exit.
From the control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [f] or [e] to select [Storage].
3. Press [d] to select [Delete All].
4. Press [f] or [e] to select [Yes].
5. Press [ENTER] to confirm selection.
6. Press [MENU] to exit.
7.12 Automatically Deleting Captured Images When the
Device is Turned off (Auto Erase)
From the remote control or control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [f] or [e] to access the [Storage] menu.
3. Press [c] or [d] to enable [Auto Erase].
4. Press [f] or [e] to select among [ON] modes.
5. Press [MENU] to exit.
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
7.13 Panning Across a Live Image (PAN)
<Note> Panning and zooming are not available in Microscope Mode.
From the remote control:
1. Press [PAN] on the remote control to zoom in a part of a live image.
2. Press [c] or [d] or [e] or [f] to move around the partially zoomed-in
image.
3. Press [PAN] to exit the partially zoom in mode.
From the control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [f] or [e] to select the [Display] menu.
3. Press [d] to select [PAN].
4. Press [f] or [e] to select among [ON] modes.
5. Press [MENU] to exit.
6. Press [c] or [d] or [e] or [f] to move around the partially zoomed-in
image.
7.14 Playing a Slides (Slide Show)
7.14.1 Using the slide show effect:
1. Press [MENU] on the remote control or control panel to enter the
on-screen menu.
2. Press [f] or [e] to select the [Storage] menu.
3. Press [d ] to enable [Slide Show Effect].
4. Press [f] or [e] to select page-flipping mode among [Off / Shutter / Right
/ Down / Side / Open].
5. Press [MENU] to exit.
7.14.2 Setting delay time
1. Press [MENU] on the remote control or control panel to enter the
on-screen menu.
2. Press [f] or [e] to select the [Storage] menu.
3. Press [d] to enable [Delay].
4. Press [f] or [e] to select page-flipping interval [1 Sec/3 Sec/5 Sec/10
Sec/Manual].
5. Press [MENU] to exit.
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
7.14.3 Start/Pause/Stop Playing Images
<Note> Images over 8MB cannot be played. During playback, the
[ROTATE] function can be activated to rotate the images.
From the remote control:
1. Press [SLIDE SHOW] to start playback.
2. Press [ENTER] to pause playback.
3. Press [ENTER] again to continue playback.
4. Press [SLIDE SHOW] again to stop playback.
From the control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [f] or [e] to select the [Storage] menu.
3. Press [d] to enable [Slide Show].
4. Press [ENTER] to play back images.
5. Press [ENTER] to pause playback.
6. Press [ENTER] again to continue playback.
7. To stop playing, repeat Steps 1 to 4.
7.15 Comparing Live Images with Stored Images (PBP)
This function allows you to simultaneously display a live image on the right
side and a storage image on the left side for comparison.
C1
C3
C2
C4
C5
C6
C7
Stored image
Live image
From the remote control:
1. Press [PBP] to enter the photo selection screen.
2. Press [c] or [d] or [e] or [f] to select the file to be compared.
3. Press [ENTER] to activate image comparison.
4. Press [ENTER] to switch between the stored image and the live image.
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press [f] or [e] to move the selected image left or right.
6. Press [ZOOM+/-] to zoom in/out from the live image
7. Press [PBP] to return to the stored image screen.
8. Press [MENU] to exit.
From the control panel
1. Press [MENU] to enter the on-screen menu.
2. Press [f] or [e] to select the [Display] menu.
3. Press [d] to select [PBP].
4. Press [PBP] to enter the photo selection screen.
5. Press [S] or [T] or [e] or [f] to select the desired file for comparison.
6. Press [ENTER] to activate image comparison.
7. Press [f] or [e] to move through selected images.
8. Press [ZOOM+/-] to zoom in/out from the live image
9. Press [PBP] to return to the stored image screen.
10. Press [MENU] to exit.
7.16 Restoring Factory Default Settings (Factory Reset)
Use the remote control or control panel:
1. Press [MENU] on the remote control or control panel to enter the
on-screen menu.
2. Press [f] or [e] to select the [Advance] menu.
3. Press [d] to select [Factory Reset].
4. Press [f] or [e] to select [Yes].
5. Press [ENTER] to activate.
7.17 Computer- Related Functions
Ensure that the USB cable is connected and the drivers are installed before
using the computer-related functions. Refer to 4.2.2 Connecting to
external devices and 4.4 Installing the driver and application B-Works
in Chapter 4 Installation and Connections in this user manual.
English - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
7.17.1 Inserting a Photo in the MS-Paint Application
1. Click [File> From Scanner or Camera] in the MS-Paint application as
shown in the bottom left figure.
2.Click on [Get Picture] to finish, as shown in the top right figure.
7.17.2 Inserting a Photo in a Microsoft Word Document
1. Click [Insert / Image / From Scanner or Camera] in the Microsoft Word
application.
2. Select [Visual Presenter V2] and click [Custom Insert].
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click [Get Picture] to finish.
7.17.3 Changing the Setting of the Camera 335B and then
Capturing a Photo in Microsoft Word
1. Click [Insert /Image /From Scanner or Camera] in Microsoft Word.
2. Select [Visual Presenter V2 TWAIN] and click [Custom Insert].
English - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
3. A window displaying a live image (see below) will appear.
4. Press [Setting]: When the Camera Settings window pops up, the live
image can be adjusted. The operation is identical from both the remote
control and the control panel. Refer to Chapter 6 Control
Panel/Remote Control Buttons and On-screen Menu for more
information.
5. Press [Capture] to capture images in Microsoft Word.
6. Press [Cancel] to exit.
7.17.4 Setting up the Camera 335B as a Webcam for Skype
The Camera 335B can be used as a webcam for instant message (IM)
software such as Skype and MSN. Operation with any IM program is similar.
In Skype, for example, complete the following steps:
1. Open the Skype application and choose [Tools] > [Options].
2. Select [Video Settings], check [Start my video automatically when I am in
a call] and select [Visual Presenter V2] as the desired webcam, as
shown below.
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
o
p
n
Call your desired contact. When both parties are connected, Skype will
display the video screen.
English - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Connecting to a Microscope
1 Mount the microscope adaptor (optional) in the accessories pack onto the
microscope
<Note> The Microscope adapter fits eyepieces of about Ø28.4mm.
2 Connect the lens of the Camera 335B to the microscope adaptor.
3 Select the Microscope mode
3.1. From the control panel or remote control
3.1.1. Press [MENU] to enter the on-screen menu.
3.1.2. Press [f] or [e] to select [Display].
3.1.3. Press [d] to select among [Mode] modes.
3.1.4. Press [f] or [e] to select [Microscope].
4 If the image is fuzzy:
4.1. Adjust the focus of microscope.
4.2. Press the [FOCUS] button on either side of the Camera 335B lens to
activate the auto focus.
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9 Software instructions
Using the Camera with a computer. After installing the B-WORKS, you can use
the software to:
¾ Control the Camera 335B.
¾ Capture and record images.
¾ Annotate images, highlight important details and save them for later use.
¾ Use the full-screen function.
9.1 System Requirements
Windows Vista /
MAC OS X 10.4 / 10.5 /
Windows XP
Windows 7
¾ Min CPU: P4 2.4 GHz
¾ Min Memory: 1GB (32-bits)
/2GB(64-bits)
10.6 (32-bits Kernel)
¾ Min CPU: PowerPC G4
866MHz or Intel Pentium®
¾ 1.83GHz Intel Core 2 Duo
¾ Min Memory: 512MB
¾ Min resolution 1024x768
¾ 24-bit color display
¾ Min CPU: P4 1.8 GHz
¾ Min Memory: 512MB
¾ Direct X 9 Compatible
¾ Min Resolution: 1024x768
¾ 100MB Min Disc Space
¾ Direct X 9 Compatible
¾ Min Resolution: 1024x768
¾100MB Min Disc Space
monitor
¾ 100MB Min Disc Space
¾ Min QuickTime 7.4.5
9.2 Installation & Function
Please refer to the B-WORKS user manual in the CD for installation
instructions and functions using.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10 Troubleshooting
This chapter outlines possible solutions to common problems. For other issues,
contact your dealer or service center.
No.
Problems
Solutions
1
No power signal
Check that the power cord is securely connected to
the wall socket and the unit.
2
No image output
from the Camera
335B
1. Check the power outlet.
2. Check the connection. Refer to 4.2.2 Connecting
to external devices in Chapter 4 Installation
and Connections in this manual.
3. Check the signal sources [SOURCE]. Refer to 7.1
Switching image sources in Chapter 7
Descriptions of major functions in this manual.
4. Check the settings for the projector source. Refer
to the projector’s user manual.
5. Check if DIP Switch is properly set. Refer to
Chapter 5 DIP Switch for related settings.
Probably the document is too close to the lens. Press
[ZOOM -] on the remote control or control panel.
Or increase the distance between the lens and the
document, and then press the [FOCUS] button on
the right side of the lens.
3
Unable to focus
4
5
Cannot see the
entire image
Check Auto Image of the projector. Refer to the
projector’s user manual.
Visual Presenter
Visual Presenter V2, B-WORKS and other
V2, B-WORKS and applications cannot be used simultaneously. Please
other applications close the currently running applications and then
cannot be used
simultaneously
execute the desired application.
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Information in this Guide may change due to product
improvements. To obtain the latest manuals, literature, and
software please visit the Dukane web site at;
www.dukane.com/av and look at the specific model
SUPPORT or DOWNLOADS section.
DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487
/
630-762-4032
Fax 630-584-5156
Download from Www.Somanuals.com. All Manuals Search And Download.
|