Dukane Projector 8766 User Manual

Liquid Crystal Projector  
Model 8766  
USER'S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fire and Shock Precautions  
What's in the Box?  
Make sure your box contains everything listed. If any pieces are miss-  
ing, contact your dealer.  
1. Ensure that there is sufficient ventilation and that vents are unob-  
structed to prevent the build-up of heat inside your projector. Allow  
at least 3 inches (10 cm) of space between your projector and a  
wall.  
Please save the original box and packing materials if you ever need to  
ship your Dukane 8766 Projector.  
2. Prevent foreign objects such as paper clips and bits of paper from  
falling into your projector.  
Do not attempt to retrieve any objects that might fall into your pro-  
jector. Do not insert any metal objects such as a wire or screwdriver  
into your projector. If something should fall into your projector, dis-  
connect it immediately and have the object removed by a qualified  
NEC service personnel.  
Lens cap  
3. Do not place any liquids on top of your projector.  
4. Do not look into the lens while the projector is on. Serious damage  
to your eyes could result.  
Projector  
5. Keep any items such as magnifying glass out of the light path of the  
projector. The light being projected from the lens is extensive, there-  
fore any kind of abnormal objects that can redirect light coming out  
of the lens, can cause unpredictable outcome such as fire or injury  
to the eyes.  
O
F
F
V
ID  
E
O
P
O
W
E
R
S
-V  
ID  
E
O
R
G
O
N
B
A
U
TO  
A
D
J
.
SELECT  
PJ  
PIC  
T
UR  
E
H
E
LP  
A
F
S
P
R
E
E
EC  
T
Z
E
M
P
IC  
-M  
A
G
N
U
IF  
T
E
Y
V
O
LU  
M
E
6. Do not cover the lens with the supplied lens cap or equivalent while  
the projector is on. Doing so can lead to melting of the cap and  
possibly burning your hands due to the heat emitted from the light  
output.  
Remote control  
String and rivet  
7. The projector is designed to operate on a power supply of 100-120  
or 200-240 V 50/60 Hz AC. Ensure that your power supply fits this  
requirement before attempting to use your projector.  
8. Handle the power cable carefully and avoid excessive bending.  
A damaged cord can cause electric shock or fire.  
9. If the projector is not to be used for an extended period of time,  
disconnect the plug from the power outlet.  
10. Do not touch the power plug during a thunderstorm. Doing so can  
cause electrical shock or fire.  
Power cable  
USB cable  
RGB signal cable  
CAUTION  
1. Do not try to touch the ventilation outlet on the front as it can be-  
come heated while the projector is turned on.  
2. Do no use the tilt-foot for purposes other than originally intended.  
Misuses such as gripping the tilt-foot or hanging on the wall can  
cause damage to the projector.  
3. When carrying the projector by the carrying handle, make sure the  
two screws that attach the carrying handle to the projector cabinet  
are tight.  
Insufficient tightening of the two screws could result in the projector  
falling and causing injury.  
Soft carrying case  
Carrying handle, Screw (M4
ן
2)  
4. Enable High-Speed Fan mode if you continue to use the projector  
for consecutive days. (From the menu, select [Advanced] [High  
Speed Fan Mode].)  
Flathead screwdriver  
5. Do not unplug the power cable from the wall outlet under any one of  
the following circumstances.  
Doing so can cause damage to the projector:  
*
*
While the Hour Glass icon appears.  
While the cooling fans are running. (The cooling fans continue  
to work for 60 seconds after the projector is turned off).  
Lamp Replacement  
User's Manual  
To replace the lamp, follow all instructions provided on page E-30.  
Be sure to replace the lamp when the message "The lamp has  
reached the end of its usable life. Please replace the lamp."  
appears. If you continue to use the lamp after the lamp has reached  
the end of its usable life, the lamp bulb may shatter, and pieces of  
glass may be scattered in the lamp case. Do not touch them as the  
pieces of glass may cause injury.  
If this happens, contact your dealer for lamp replacement.  
Allow a minimum of 60 seconds to elapse after turning off the pro-  
jector. Then turn off the main power switch, disconnect the power  
cable and allow 60 minutes to cool the projector before replacing  
the lamp.  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Important Information ..................................................... E-2  
Safety Cautions ............................................................................................................... E-2  
What's in the Box? .......................................................................................................... E-3  
TROUBLESHOOTING ........................................................ E-32  
Power Indicator ............................................................................................................. E-32  
Status Indicator ............................................................................................................. E-32  
Lamp Indicator .............................................................................................................. E-32  
Common Problems & Solutions .................................................................................... E-33  
INTRODUCTION .............................................................. E-5  
Introduction to the Projector ........................................................................................... E-5  
Part Names of the Projector ............................................................................................ E-6  
Attaching the lens cap ................................................................................................. E-6  
Attaching the supplied carrying handle ........................................................................ E-6  
Top Features ................................................................................................................ E-7  
Terminal Panel Features ............................................................................................... E-8  
Part Names of the Remote Control .............................................................................. E-9  
Battery Installation ................................................................................................. E-10  
Remote Control Precautions .................................................................................. E-10  
Operating Range for Wireless Remote Control ...................................................... E-10  
SPECIFICATIONS ........................................................... E-34  
APPENDIX ................................................................... E-35  
Cabinet Dimensions ...................................................................................................... E-35  
Pin Assignments of D-Sub RGB Input Connector .......................................................... E-35  
Compatible Input Signal List ......................................................................................... E-36  
INSTALLATION AND CONNECTIONS ....................................... E-11  
Setting Up the Screen and the Projector ....................................................................... E-11  
Selecting a Location .................................................................................................. E-11  
Throw Distance and Screen Size ............................................................................... E-12  
Making Connections ...................................................................................................... E-13  
Connecting Your PC or Macintosh Computer ............................................................ E-13  
To connect SCART output (RGB) ............................................................................... E-14  
Connecting an External Monitor ................................................................................ E-14  
Connecting Your DVD Player ..................................................................................... E-15  
Connecting Your VCR or Laser Disc Player ............................................................... E-16  
Connecting the Supplied Power Cable ....................................................................... E-16  
PROJECTING AN IMAGE (BASIC OPERATION) ........................... E-17  
Turning on the Projector ................................................................................................ E-17  
Selecting a Source ......................................................................................................... E-18  
Adjusting the Picture Size and Position ......................................................................... E-18  
Correcting the Vertical Keystone Distortion ................................................................... E-19  
Optimizing RGB Picture Automatically .......................................................................... E-20  
Turning Up or Down Volume ......................................................................................... E-20  
Turning off the Projector ............................................................................................... E-20  
CONVENIENT FEATURES ................................................... E-21  
Using the Remote Mouse Function ............................................................................... E-21  
Connecting to your computer for the remote mouse function ................................... E-21  
When using the USB Port .......................................................................................... E-21  
Switching operation mode between computer and projector ..................................... E-21  
Turning Off the Image and Sound .................................................................................. E-22  
Freezing a Picture .......................................................................................................... E-22  
Enlarging and Moving a Picture ..................................................................................... E-22  
Getting the Information ................................................................................................. E-22  
USING ON-SCREEN MENU ................................................. E-23  
Basic Menu Operation ................................................................................................... E-23  
Using the Menus ....................................................................................................... E-23  
List of Menu Items ........................................................................................................ E-24  
Menu Elements ............................................................................................................. E-25  
Menu Descriptions & Functions .................................................................................... E-26  
Picture ....................................................................................................................... E-26  
Brightness/Contrast/Sharpness/Color/Hue ............................................................ E-26  
Picture Management .............................................................................................. E-26  
Image ........................................................................................................................ E-26  
Enabling Auto Keystone <Auto Keystone> ............................................................. E-26  
Correcting Vertical Keystone Distortion Manually <Keystone> .............................. E-26  
Saving Vertical Keystone Correction <Keystone Save> .......................................... E-26  
Selecting Aspect Ratio [Aspect Ratio] ................................................................... E-27  
Adjusting the Vertical Position of Image [Cinema Position](for Cinema only) ....... E-27  
Setup ......................................................................................................................... E-27  
Selecting Lamp Mode [Lamp Mode] ...................................................................... E-27  
Selecting Menu Language [Language] ................................................................... E-27  
Selecting Menu Color [Menu Color Select] ............................................................ E-27  
Selecting Menu Display Time [Menu Display Time] ............................................... E-27  
Selecting a Color or Logo for Background [Background] ...................................... E-27  
Selecting Projector Orientation [Orientation] ......................................................... E-27  
Advanced ................................................................................................................... E-27  
Disabling the Cabinet Buttons [Control Panel Key Lock] ........................................ E-27  
Enabling Power Management [Power Management] ............................................. E-27  
Enabling High Speed Fan Mode [High Speed Fan Mode] ....................................... E-27  
Selecting Signal Format [Signal Select] ................................................................. E-28  
Page2 .................................................................................................................... E-28  
Selecting Noise Reduction Level (not available for RGB) ....................................... E-28  
Enabling Auto Adjust [Auto Adjust] ....................................................................... E-28  
Adjusting Position/Clock (when Auto Adjust is off) ............................................... E-28  
Information ................................................................................................................ E-28  
Default ....................................................................................................................... E-29  
MAINTENANCE ............................................................. E-30  
Replacing the Lamp ...................................................................................................... E-30  
Cleaning ........................................................................................................................ E-31  
Cleaning or Replacing the Filter ................................................................................. E-31  
Cleaning the Cabinet and the Lens ............................................................................. E-31  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
About this user's manual  
Introduction to the Projector  
This section introduces you to your new Dukane 8766 Projector  
and describes the features and controls.  
The fastest way to get started is to take your time and do ev-  
erything right the first time. Take a few minutes now to review  
the user's manual. This may save you time later on. At the  
beginning of each section of the manual you'll find an over-  
view. If the section doesn't apply, you can skip it.  
Congratulations on Your Purchase of The Projector  
The Dukane 8766 is one of the very best projectors available  
today. The Dukane 8766 enables you to project precise images  
up to 300 inches across (measured diagonally) from your PC or  
Macintosh computer (desktop or notebook), VCR, DVD player, docu-  
ment camera, or a laser disc player.  
You can use the projector on a tabletop or cart, you can use the projec-  
tor to project images from behind the screen, and the projector can be  
permanently mounted on a ceiling*1. The remote control can be used  
wirelessly.  
IBM is a trademark or registered trademark of International Business  
Machines Corporation.  
Mac and PowerBook are trademarks of Apple Computer, Inc., regis-  
tered in the U.S. and other countries.  
Windows, Windows 98, Windows Me, Windows XP or Windows 2000  
are trademarks or registered trademarks of Microsoft Corporation.  
Other product and company names mentioned in this user’s manual  
may be the trademarks or registered trademarks of their respective  
holders.  
1
*
Do not attempt to mount the projector on a ceiling yourself.  
The projector must be installed by qualified technicians in order  
to ensure proper operation and reduce the risk of bodily injury.  
In addition, the ceiling must be strong enough to support the pro-  
jector and the installation must be in accordance with any local  
building codes. Please consult your dealer for more information.  
Features you'll enjoy:  
Auto vertical keystone correction up to +/- 30 degrees  
Low level noise  
Short focal length lens  
200W lamp (160W Eco mode)  
Direct keys for source selection  
New Color Management system  
New menu design improves operability  
Advanced intelligent pixel blending technology-  
an extremely accurate image compression technology - of-  
fers a crisp image with UXGA (1600
ן
1200) resolution.  
Supports most IBM VGA, SVGA, XGA, SXGA/UXGA  
Macintosh, component signal (YCbCr/ YPbPr) or any  
other RGB signals within a horizontal frequency range of 24 to 100  
kHz and a vertical frequency range of 50 to 120 Hz. This includes  
NTSC, PAL, PAL-N, PAL-M, PAL60, SECAM and NTSC4.43 stan-  
dard video signals.  
NOTE: Composite video standards are as follows:  
NTSC: U.S. TV standard for video in U.S. and Canada.  
PAL: TV standard used in Western Europe.  
PAL-N: TV standard used in Argentine, Paraguay and Uruguay.  
PAL-M: TV standard used in Brazil.  
PAL60: TV standard used for NTSC playback on PAL TVs.  
SECAM: TV standard used in France and Eastern Europe.  
NTSC4.43: TV standard used in Middle East countries.  
The supplied remote control can be used without a cable, and you  
can even use the remote control to operate your PC's mouse  
wirelessly from across the room with the built-in remote mouse func-  
tion.  
You can control the projector with a PC using the PC Control port.  
The contemporary cabinet design is light, compact, easy to carry,  
and complements any office, boardroom or auditorium.  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names of the Projector  
Controls (See page E-7)  
Monaural Speaker (1W)  
Zoom Lever  
Lamp Cover (See page E-30)  
Lamp Cover Screw  
Focus Ring  
Lens  
Ventilation (outlet)  
Heated air is exhausted from here  
Adjustable Tilt Foot Lever  
(See page E-18)  
Adjustable Tilt Foot  
(See page E-18)  
Adjustable Tilt Foot Lever  
(See page E-18)  
Lens Cap  
Adjustable Tilt Foot (See page E-18)  
Remote Sensor (See page E-10)  
Remote Sensor  
(See page E-10)  
Ventilation (inlet) / Filter Cover (inlet)  
Built-in Security Slot ( )*  
AC Input  
Connect the supplied power cable's two-  
pin plug here, and plug the other end into  
an active wall outlet. (See page E-16)  
Main Power Switch  
When you plug the supplied power cable into  
an active wall outlet and turn on the Main  
Power switch, the POWER indicator turns  
orange and the projector is in standby mode.  
(See page E-17)  
*
This security slot supports the MicroSaver® Security System. MicroSaver® is a registered trademark of Kensington Microware Inc. The logo is  
trademarked and owned by Kensington Microware Inc.  
Attaching the lens cap  
Attaching the supplied carrying handle  
To attach the lens cap to the bottom with the supplied string and rivet:  
You can carry the projector by attaching the supplied carrying handle  
securely to the projector.  
1. Thread the string through the hole on the lens cap and then tie a knot  
in the string.  
To attach the supplied carrying handle, use the supplied flathead screw-  
driver and two screws.  
2. Use the rivet to attach the  
string to the bottom of the  
projector.  
CAUTION:  
When carrying the projector by the carrying handle, make sure the  
two screws that attach the carrying handle to the projector cabinet  
are tight.  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. ENTER Button  
Executes your menu selection and activates items selected from the  
menu.  
Top Features  
6 7 8  
5
10  
2 3 4  
11  
13. CANCEL Button  
Pressing this button will return to the previous menu.  
While you are in the main menu, pressing this button will close the  
menu.  
9
1
12  
13  
1. POWER Button (ON / STAND BY)(  
)
Use this button to turn the power on and off when the main power is  
supplied and the projector is in standby mode.  
To turn on the projector, press and hold this button for a minimum of  
two seconds. To turn off the projector, press this button twice.  
2. POWER Indicator  
When this indicator is green, the projector is on; when this indicator  
is orange, it is in standby mode. See the Power Indicator section on  
page E-32 for more details.  
3. STATUS Indicator  
If this light blinks red rapidly, it indicates that an error has occurred,  
the lamp cover is not attached properly or the projector has over-  
heated. If this light remains orange, it indicates that you have pressed  
a cabinet key while the Control Panel Key Lock is enabled. See the  
Status Indicator section on page E-32 for more details.  
4. LAMP Indicator  
If this light blinks red rapidly, it's warning you that the lamp has reached  
the end of its usable life. After this light appears, replace the lamp as  
soon as possible (See page E-30). If this is lit green continually, it  
indicates that the lamp mode is set to Eco. See the Lamp Indicator  
section on page E-32 for more details.  
5. VIDEO Button  
Press this button to select a video source from a VCR, DVD player,  
laser disc player or document camera.  
6. S-VIDEO Button  
Press this button to select an S-Video source from a VCR.  
7. RGB Button  
Press this button to select an RGB source from computer or compo-  
nent equipment connected to your RGB port.  
8. AUTO ADJ. Button  
Use this button to adjust Position-H/V and Pixel Clock/Phase for an  
optimal picture (See page E-20).  
9. Source Indicators  
When one of the RGB, VIDEO or S-VIDEO input is selected, the  
corresponding source indicator lights.  
10. MENU Button  
Displays the menu.  
11. SELECT GHFE / Volume Buttons  
GH : Use these buttons to select the menu of the item you wish to  
adjust.  
FE : Use these buttons to change the level of a selected menu item.  
A press of the Ebutton executes the selection. When no menus  
appear, these buttons work as a volume control.  
When an image is magnified, the SELECT GHFE button moves the  
image.  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Terminal Panel Features  
2
1
7
8
6
5
4
3
1. RGB IN / Component Input Connector (Mini D-Sub 15 Pin)  
Connect your computer or other analog RGB equipment such as IBM  
compatible or Macintosh computers. Use the supplied RGB cable to  
connect to your computer. This also serves as a component input  
connector that allows you to connect a component video output of  
component equipment such as a DVD player. This connector also  
supports SCART output signal. See page E-14 for more details.  
2. RGB AUDIO Input Mini Jack (Stereo Mini)  
This is where you connect the audio output from your computer or  
DVD player when connected to the RGB input. A commercially avail-  
able audio cable is required.  
3. RGB OUT Connector (Mini D-Sub 15 Pin)  
You can use this connector to loop your computer image to an exter-  
nal monitor from the RGB input source.  
This connector outputs RGB signal in standby mode.  
4. AUDIO OUT Mini Jack (Stereo Mini)  
You can use this jack to output sound from the currently selected  
source (RGB, VIDEO or S-VIDEO). Output sound level can be ad-  
justed in accordance with the sound level of the internal speaker.  
5. S-VIDEO IN Connector (Mini DIN 4 Pin)  
Here is where you connect the S-Video input from an external source  
like a VCR.  
NOTE: S-Video provides more vivid color and higher resolution than the tra-  
ditional composite video format.  
S-VIDEO AUDIO Input Jacks R/L (RCA)  
These are your left and right channel audio inputs for stereo sound  
from an S-Video source.  
6. VIDEO IN Connector (RCA)  
Connect a VCR, DVD player, laser disc player, or document camera  
here to project video.  
VIDEO AUDIO Input Jacks R/L (RCA)  
These are your left and right channel audio inputs for stereo sound  
from a Video source.  
7. USB (PC) Port (Type B)  
Connect this port to the USB port (type A) of your PC using the sup-  
plied USB cable. You can operate your computer's mouse functions  
from the remote control.  
8. PC CONTROL Port (DIN 8 Pin)  
For service personnel only.  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. MENU Button  
Displays the menu for various settings and adjustments.  
Part Names of the Remote Control  
NOTE: If you are using a Macintosh computer, you can click either the CANCEL  
(right-click) or ENTER (left-click) button to activate the mouse.  
10. SELECT GHFE (Mouse) Button  
When you are in the Computer mode, these buttons work as a com-  
puter mouse.  
When you are in the Projector mode, which is indicated by lighting  
the PJ button. See page E-21.  
1
2
GH : Use these buttons to select the menu of the item you wish  
to adjust.  
OFF  
ON  
POWER  
4
3
FE : Use these buttons to change the level of a selected menu  
item. A press of the E button executes the selection. When  
no menus appear, these buttons work as a volume control.  
When an image is magnified, the SELECT GHFE button moves the  
image.  
VIDEO  
AUTO ADJ.  
S-VIDEO RGB  
5
6
8
7
9
11. ENTER (Left Click) Button  
When you are in the Computer mode, this button works as the mouse  
left button. When this button is pressed and held for a minimum of 2  
seconds, the drag mode is set. When you are in the Projector mode,  
which is indicated by lighting the PJ button: Use this button to enter  
your menu selection. It works the same way as the ENTER button on  
the cabinet. See page E-7.  
10  
11  
SELECT  
12  
PJ  
12. CANCEL (Right Click) Button  
When you are in the Computer mode, this button works as the mouse  
right button. When you are in the Projector mode, which is indicated  
by lighting the PJ button: It works the same way as the CANCEL  
button on the cabinet. See page E-7.  
13  
15  
PICTURE  
ASPECT  
14  
16  
19  
HELP  
FREEZE PIC-MUTE  
MAGNIFY  
13. PJ Button  
18  
17  
Press this button to switch the SELECT, CANCEL, and ENTER but-  
tons between the Projector mode (lit red) and the Computer mode.  
Press this button or any one of the POWER ON/OFF, MENU, AS-  
PECT, HELP, MAGNIFY, buttons to switch to the Projector mode and  
the PJ button lights red. To switch back to the Computer mode, press  
the PJ button again. See page E-21.  
VOLUME  
20  
14. PICTURE Button  
Press this button to display the Picture adjustement screen such as  
Brightness, Contrast, Sharpness, Color and Hue. See page E-26.  
15. ASPECT Button  
Press this button to display theAspect Ratio select screen. See page  
E-27.  
1. Infrared Transmitter  
Direct the remote control toward the remote sensor on the projector  
cabinet.  
16. HELP Button  
Provides the set information.  
2. LED  
Flashes when any button is pressed.  
17. FREEZE Button  
This button will freeze a picture. Press again to resume motion.  
3. POWER ON Button  
When the main power is on, you can use this button to turn your  
projector on.  
18. PIC-MUTE Button  
This button turns off the image and sound for a short period of time.  
Press again to restore the image and sound.  
NOTE: To turn on the projector, press and hold the POWER ON button for a  
minimum of two seconds.  
4. POWER OFF Button  
You can use this button to turn your projector off.  
19. MAGNIFY (+)(–) Button  
Use this button to adjust the image size up to 400%.  
NOTE: To turn off the projector, press the POWER OFF button twice.  
The image is magnified about the center of the screen. See page E-  
22.  
5. VIDEO Button  
Press this button to select a video source from a VCR, DVD player,  
laser disc player or document camera.  
20. VOLUME (+)(–) Button  
Press (+) to increase the volume and (–) to decrease it.  
6. S-VIDEO Button  
Press this button to select an S-Video source from a VCR.  
NOTE: The default is the Computer mode, which allows you to use the SELECT,  
CANCEL, and ENTER buttons as your computer mouse. When the POWER ON/  
OFF, MENU, ASPECT, HELP, or MAGNIFY button is pressed, the PJ button lights  
red to indicate that you are in the Projector mode. If no buttons are pressed  
within 60 seconds, the light goes out and the Projector mode is canceled.  
7. RGB Button  
Press this button to select RGB input.  
8. AUTO ADJ. Button  
Use this button to adjust an RGB source for an optimal picture.  
See page E-20.  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery Installation  
Remote Control Precautions  
1. Press firmly and slide the battery cover off.  
Handle the remote control carefully.  
If the remote control gets wet, wipe it dry immediately.  
Avoid excessive heat and humidity.  
If you will not be using the remote control for a long time, remove the  
batteries.  
Do not place the batteries upside down.  
Do not use new and old batteries together, or use different types of  
batteries together  
2. Remove both old batteries and install new ones (AA). Ensure that  
you have the batteries' polarity (+/-) aligned correctly.  
Operating Range for Wireless Remote Control  
7m/22 feet  
7m/22 feet  
30˚  
30˚  
30˚  
30˚  
3. Slip the cover back over the batteries until it snaps into place. Do not  
mix different types of batteries or new and old batteries.  
Remote sensor on  
projector cabinet  
Remote control  
The infrared signal operates by line-of-sight up to a distance of about  
22 feet/7 m and within a 60-degree angle of the remote sensor on the  
projector cabinet.  
The projector will not respond if there are objects between the re-  
mote control and the sensor, or if strong light falls on the sensor.  
Weak batteries will also prevent the remote control from properly  
operating the projector.  
Note on Remote Control Operation:  
If you press and hold the SELECT GHFE button while installing new  
batteries, the remote control may fail to work properly.  
Should this happen, remove the batteries and then install them again  
without touching the SELECT button.  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION AND CONNECTIONS  
This section describes how to set up your projector and how to connect video and audio sources.  
Your projector is simple to set up and use.  
But before you get started, you must first:  
1
1Set up a screen and the projector.  
2Connect your computer or video equip-  
ment to the projector. See page  
E-13 – 16.  
3Connect the supplied power cable. See  
page E-16.  
2
NOTE: Ensure that the power cable and any  
other cables are disconnected before moving  
the projector. When moving the projector or  
when it is not in use, cover the lens with the  
lens cap.  
To the wall outlet.  
3
Setting Up the Screen and the Projector  
Selecting a Location  
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" (0.53 m)  
measured diagonally when the projector is roughly 27.6 inches (0.7 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when  
the projector is about 393.7 inches (10 m) from the wall or screen. Use the drawing below as a guide.  
Screen size (Unit: cm/inch)  
609.6(W)X457.2(H)/240(W)X180(H)  
487.7(W)X365.8(H)/192(W)X144(H)  
406.4(W)X304.8(H)/160(W)X120(H)  
Screen Size  
365.8(W)X274.3(H)/144(W)X108(H)  
300"  
240"  
304.8(W)X228.6(H)/120(W)X90(H)  
200"  
243.8(W)X182.9(H)/96(W)X72(H)  
180"  
203.2(W)X152.4(H)/80(W)X60(H)  
150"  
162.6(W)X121.9(H)/64(W)X48(H)  
120"  
121.9(W)X91.4(H)/48(W)X36(H)  
100"  
81.3(W)X61.0(H)/32(W)X24(H)  
61.0(W)X45.7(H)/24(W)X18(H)  
50.8(W)X38.1(H)/20(W)X15(H)  
80"  
60"  
42.7(W)X32(H)/17(W)X13(H)  
40"  
30"  
25"  
21"  
Lens center  
0.7/27.6"  
0.8/31.5"  
1.0/39.4"  
1.3/51.2"  
2.0/78.7"  
2.7/106.3"  
3.4/133.9"  
6.1/240.2"  
4.0/157.5"  
5.1/200.8"  
6.7/263.8"  
8.1/318.9"  
10.1/397.6"  
Distance (Unit: m/inch)  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Throw Distance and Screen Size  
The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation.  
Distance Chart  
Screen Width  
B = Vertical distance between lens center and screen center  
C = Throw distance  
D = Vertical distance between lens center and top of screen (bottom of  
screen for desktop)  
α = Throw angle  
Screen Diagonal  
NOTE: Distances may vary +/-5%.  
Screen Height  
Screen center  
(
(
)
B
)
D
Screen Bottom  
Lens Center  
Throw Angle (α)  
(
)
C
Throw Distance  
Screen Size  
B
C
D
α
Screen Size  
B
C
D
α
Diagonal  
inch  
21  
Width  
inch  
17  
Height  
inch  
13  
Wide – Tele  
inch  
Wide – Tele  
degree  
Diagonal  
mm  
Width  
mm  
Height  
mm  
Wide – Tele  
mm  
Wide – Tele  
degree  
inch  
5
inch  
mm  
130  
150  
180  
mm  
30  
–––  
29  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
29  
35  
42  
1
––– - 10.0  
533  
427  
320  
–––  
740  
-
-
740  
880  
––– - 10.0  
25  
20  
15  
6
1
2
2
3
11.8  
11.7  
11.6  
11.5  
11.4  
11.4  
11.4  
11.4  
11.4  
11.4  
11.4  
11.3  
11.3  
11.3  
11.3  
11.3  
11.3  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9.9  
9.8  
9.7  
9.6  
9.6  
9.6  
9.6  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
635  
762  
508  
610  
813  
381  
40  
11.8  
11.7  
11.6  
11.5  
11.4  
11.4  
11.4  
11.4  
11.4  
11.4  
11.4  
11.3  
11.3  
11.3  
11.3  
11.3  
11.3  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9.9  
9.8  
9.7  
9.6  
9.6  
9.6  
9.6  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
30  
24  
18  
7
35  
457  
890 - 1070  
40  
40  
32  
24  
10  
15  
17  
19  
20  
22  
24  
29  
36  
44  
48  
51  
58  
65  
73  
47  
57  
86  
1016  
1524  
1829  
2032  
2134  
2286  
2540  
3048  
3810  
4572  
5080  
5334  
6096  
6858  
7620  
610  
250 1200 - 1440  
370 1810 - 2180  
440 2180 - 2620  
490 2430 - 2920  
520 2550 - 3060  
550 2740 - 3290  
610 3050 - 3660  
740 3660 - 4400  
920 4590 - 5510  
1110 5510 - 6610  
1230 6130 - 7350  
1290 6440 - 7720  
1470 7360 - 8830  
1660 8290 - 9940  
1840 9210 -11050  
60  
60  
48  
36  
71  
1219  
1463  
1626  
1707  
1829  
2032  
2438  
3048  
3658  
4064  
4267  
4877  
5486  
6096  
914  
90  
72  
58  
43  
86  
103  
115  
121  
129  
144  
173  
217  
260  
290  
304  
348  
391  
400  
4
1097  
1219  
1280  
1372  
1524  
1829  
2286  
2743  
3048  
3200  
3658  
4115  
4572  
110  
120  
120  
130  
150  
180  
220  
270  
300  
310  
350  
400  
440  
80  
64  
48  
96  
5
84  
67  
50  
101  
108  
120  
144  
181  
217  
241  
253  
290  
326  
363  
5
90  
72  
54  
5
100  
120  
150  
180  
200  
210  
240  
270  
300  
80  
60  
6
96  
72  
7
120  
144  
160  
168  
192  
216  
240  
90  
9
108  
120  
126  
144  
162  
180  
10  
12  
12  
14  
16  
17  
WARNING  
Reflecting the Image  
*
Installing your projector on the ceiling must be done by a quali-  
fied technician. Contact your dealer for more information.  
Using a mirror to reflect your projector's image enables you to enjoy a  
much larger image. Contact your dealer if you need a mirror. If  
you're using a mirror and your image is inverted, use the MENU and  
SELECT buttons on your projector cabinet or your remote control to  
correct the orientation. (See page E-27.)  
*
Do not attempt to install the projector yourself.  
Only use your projector on a solid, level surface. If the projector falls  
to the ground, you can be injured and the projector severely dam-  
aged.  
Do not use the projector where temperatures vary greatly. The pro-  
jector must be used at temperatures between 32˚F (0˚C) and 95˚F  
(35˚C).  
Do not expose the projector to moisture, dust, or smoke. This will  
harm the screen image.  
Ensure that you have adequate ventilation around your projector so  
heat can dissipate. Do not cover the vents on the side or the front of  
the projector.  
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making Connections  
NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most  
cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.  
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.  
* If you accidentally hit the POWER button on the remote control, wait 60 seconds and then press the POWER button again to resume.  
Connecting Your PC or Macintosh Computer  
RGB signal cable (supplied)  
To mini D-Sub 15-pin connector on the pro-  
jector. It is recommended that you use a  
commercially available distribution amplifier  
Audio cable (not supplied)  
if connecting a signal cable longer than the  
supplied one.  
IBM PC or Compatibles (Desktop type)  
or Macintosh (Desktop type)  
PHONE  
PHONE  
NOTE: For older Macintosh,  
use a commercially available  
pin adapter (not supplied) to  
connect to your Mac's video  
port.  
IBM VGAor Compatibles (Notebook type)  
or Macintosh (Notebook type)  
Connecting your PC or Macintosh computer to your projector will en-  
able you to project your computer's screen image for an impressive pre-  
sentation.  
To connect to a PC or Macintosh, simply:  
1. Turn off the power to your projector and computer.  
2. Use the supplied signal cable to connect your PC or Macintosh to the  
projector.  
3. Turn on the projector and the computer.  
4. If the projector goes blank after a period of inactivity, it may be caused  
by a screen saver installed on the computer you've connected to the  
projector.  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To connect SCART output (RGB)  
Before connections: An exclusive SCART adapter (ADP-SC1) and a  
commercially available SCART cable are required for this connection.  
1. Turn off the power to the projector and your video equipment.  
2. Use the NEC ADP-SC1 SCART adapter and a commercially avail-  
able SCART cable to connect the RGB input of your projector and a  
SCART output (RGB) of your video equipment.  
NOTE: Audio signal is not available for this connection.  
3. Turn on the power to the projector and your video equipment.  
4. Use the RGB button on the remote control to select the RGB input.  
5. Press the MENU button on the remote control to display the menu.  
Projector  
RGB IN  
Video equipment  
such as DVD player  
6. From the menu, select [Advanced] [Signal Select RGB] [Scart].  
SCART is a standard European audio-visual connector for TVs, VCRs  
and DVD players. It is also referred to as Euro-connector.  
NOTE: The ADP-SC1 SCART adapter is obtainable from your dealer in Eu-  
rope. Contact your dealer in Europe for more information.  
To RGB IN  
Commercially available Female  
SCART cable  
ADP-SC1  
Connecting an External Monitor  
Audio cable (not supplied)  
LINE IN  
PHONE  
RGB signal cable (supplied)  
RGB signal cable (not supplied)  
You can connect a separate, external monitor to your projector to simul-  
taneously view on a monitor the RGB analog image you're projecting.  
To do so:  
NOTE:  
The RGB OUT connector outputs RGB signal during standby mode. When the  
projector goes into standby mode, the image on an external monitor disap-  
pears for a moment.  
1. Turn off the power to your projector, monitor and computer.  
When the projector is in the standby mode, the image may not be correctly  
displayed while the cooling fans are running immediately after turning on or  
off the power.  
2. Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D-  
Sub 15 pin) connector on your projector.  
Daisy chain connection is not possible.  
3. Turn on the projector, monitor and the computer.  
E-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your DVD Player  
RGB IN  
Optional 15-pin-to-RCA  
(female)
ן
3 cable (ADP-CV1)  
Component video RCA
ן
3 cable  
(not supplied)  
Audio Equipment  
DVD player  
AUDIO IN  
L
R
AUDIO OUT  
Component  
Cb Cr  
L
R
Y
Audio cable  
(not supplied)  
You can connect your projector to a DVD player with component output  
or Video output. To do so, simply:  
For a DVD player without component video (Y,Cb,Cr) output, use  
common RCA cables (not provided) to connect a composite VIDEO  
output of the DVD player to the Video Input of the projector.  
1. Turn off the power to your projector and DVD player.  
3. Turn on the projector and DVD player.  
2. If your DVD player has the component video (Y,Cb,Cr) output, use a  
commercially available component video cable (RCAX3) and the op-  
tional 15-pin-to-RCA (female)
ן
3 cable to connect your DVD player  
to the RGB IN connector on the projector.  
NOTE: Refer to your DVD player's owner's manual for more information about  
your DVD player's video output requirements,  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your VCR or Laser Disc Player  
S-Video cable (not supplied)  
Video cable (not supplied)  
Audio equipment  
VCR/ Laser disc player  
AUDIO IN  
L
R
AUDIO OUT  
L
R
Audio cable  
(not supplied)  
S-VIDEO OUT  
VIDEO OUT  
Use common RCA cables (not provided) to connect your VCR, laser  
disc player or document camera to your projector.  
To make these connections, simply:  
NOTE: Refer to your VCR or laser disc player owner's manual for more informa-  
tion about your equipment's video output requirements.  
NOTE: An image may not be displayed correctly when a Video or S-Video source  
is played back in fast-forward or fast-rewind via a scan converter.  
1. Turn off the power to the projector and VCR, laser disc player or  
document camera.  
2. Connect one end of your RCA cable to the video output connector on  
the back of your VCR or laser disc player, connect the other end to  
the Video input on your projector. Use an audio cable (not supplied)  
to connect the audio from your VCR or laser disc player to your audio  
equipment (if your VCR or laser disc player has this capability). Be  
careful to keep your right and left channel connections correct for  
stereo sound.  
3. Turn on the projector and the VCR or laser disc player.  
Connecting the Supplied Power Cable  
Connect the supplied power cable to the projector.  
First connect the supplied power cable's two-pin plug to  
the AC IN of the projector, and then connect the other  
plug of the supplied power cable in the wall outlet.  
E-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROJECTING AN IMAGE (BASIC OPERATION)  
This section describes how to turn on the projector and to project a  
picture onto the screen.  
2. Press the ENTER button to execute the selection.  
Turning on the Projector  
NOTE:  
• The projector has two power switches: main power switch and POWER button  
(POWER ON and OFF on the remote control)  
• When plugging in or unplugging the supplied power cable, make sure that the  
main power switch is pushed to the off[O] position. Failure to do so may cause  
damage to the projector.  
To turn on the main power to the projector, press the Main Power switch  
to the ON position ( I ).  
After this has been done, you can proceed to the menu operation.  
If you want, you can select the menu language later. See "Language"  
on page E-27.  
NOTE: Immediately after turning on the projector, screen flicker may occur. This  
is not a fault. Wait 3 to 5 minutes until the lamp lighting is stabilized.  
When the Lamp mode is set to Eco, the Lamp indicator will light green.  
If one of the following things happens, the projector will not turn on.  
Before you turn on your projector, ensure that the computer or video  
source is turned on and that your lens cap is removed.  
Only after you press the ON/STAND BY button on the projector cabinet  
or POWER ON button on the remote control for a minimum of 2 sec-  
onds will the power indicator turn to green and the projector become  
ready to use.  
*
If the internal temperature of the projector is too high, the projector  
detects abnormal high temperature. In this condition the projector  
will not turn on to protect the internal system. If this happens, wait for  
the projector's internal components to cool down.  
*
*
When the lamp reaches its end of usable life, the projector will not  
turn on. If this happens, replace the lamp.  
If the lamp fails to light, and if the STATUS indicator flashes on and  
off in a cycle of six times, wait a full minute and then turn on the  
power.  
Note on Startup screen (Menu Language Select screen)  
When you first turn on the projector, you will get the Startup screen. This  
screen gives you the opportunity to select one of the seven menu lan-  
guages: English, German, French, Italian, Spanish, Swedish and Japa-  
nese.  
To select a menu language, follow these steps:  
1. Use the SELECT G or H button to select one of the seven languages  
for the menu.  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a Source  
Adjusting the Picture Size and Position  
Place your projector on a flat level surface and ensure that the projector  
is square to the screen.  
Selecting the computer or video source  
Using the Remote Control  
Lift the front edge of the projector to center the image vertically.  
*
If the projected image does not appear square to the screen then  
use the Keystone feature for proper adjustment. See page E-19.  
OFF  
ON  
POWER  
VIDEO  
AUTO ADJ.  
S-VIDEO RGB  
Press any one of the RGB, VIDEO or  
S-VIDEO buttons.  
SELECT  
E
PJ  
PICTURE  
ASPECT  
HELP  
FREEZE PIC-MUTE  
MAGNIFY  
VOLUME  
Move the projector left to center the image horizontally on the screen.  
Using the cabinet buttons  
Press any one of the RGB,  
VIDEO or S-VIDEO buttons.  
NOTE: If no input signal is available, the projector will display a blue background  
(factory preset).  
Adjust the Tilt Foot  
1. Lift the front edge of the projector.  
Adjustable Tilt Foot Lever  
Adjustable Tilt Foot Lever  
Adjustable Tilt Foot  
2. Push up the Adjustable Tilt Foot Levers on the right and left sides of  
the projector to extend the adjustable tilt feet (maximum height).  
3. Push down the Adjustable Tilt Foot Levers.  
4. Lower the front of the projector to the desired height (max. 40mm/  
1.6”) and release the Adjustable Tilt Foot Lever to lock the Adjust-  
able tilt foot. There is approximately 10 degrees of up and down ad-  
justment for the front of the projector.  
E-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION:  
2. Turn off the Auto Keystone function.  
Do not use the tilt-foot for purposes other than originally intended.  
Misuses such as gripping the tilt-foot or hanging on the wall can  
cause damage to the projector.  
Zoom  
Use the ZOOM lever to finely adjust the image size on the screen.  
Use the SELECT H button to select “Image” and then press the  
SELECT E button. The “Auto Keystone” will be displayed. Press the  
SELECT E to select “Off”.  
You can use the ZOOM lever to enlarge or reduce an image size.  
Focus  
Use the FOCUS ring to obtain the best focus.  
3. Select the Keystone function.  
Correcting the Vertical Keystone Distortion  
Use the SELECT H button to select “Keystone”.  
Auto Keystone Correction  
The Auto Keystone correction feature will correct the vertical distortion  
of a projected image on the screen. No special operation required. Just  
put the projector on a flat surface.  
Note that the vertical keystone angle can be corrected between 30 de-  
grees upward and 30 degrees downward of projector tilt from level.  
4. Correct the vertical distortion.  
NOTE: Keystone correction angle could be less than 30 degrees for some sig-  
Use the SELECT F or E button to correct the vertical keystone dis-  
nals that have a high resolution or frequency such as UXGA.  
tortion.  
Manual Keystone Correction  
You can also correct the vertical keystone distortion manually.  
To do so:  
1. Press the MENU button.  
The menu will be displayed.  
5. Press the MENU button to close the menu.  
NOTE: You can save the changes using the Keystone Save feature when you turn  
off the projector.  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimizing RGB Picture Automatically  
Turning off the Projector  
OFF  
ON  
POWER  
VIDEO  
AUTO ADJ.  
Adjusting the Image Using Auto Adjust  
To turn off the projector:  
S-VIDEO RGB  
Optimizing RGB image automatically  
Press the Auto Adjust button to optimize an RGB image automatically.  
First, press the POWER (ON/STAND BY) but-  
ton on the projector cabinet or the POWER OFF  
button on the remote control. The “Power Off /  
Are you sure?” message will appear.  
[Poor picture]  
SELECT  
PJ  
PICTURE  
ASPECT  
HELP  
FREEZE PIC-MUTE  
MAGNIFY  
AUTO ADJ.  
VOLUME  
Secondly, press the ENTER button or press  
the POWER (ON/STAND BY) or the POWER  
OFF button again.  
The power indicator will glow orange.After the  
projector turns off, the cooling fans keep op-  
erating for 60 seconds (Cooling-off time).  
Lastly, turn off the Main Power switch. The  
power indicator will go out. Last unplug the  
power cable.  
[Normal picture]  
CAUTION  
Do not unplug the power cable from the  
wall outlet or do not turn off the main power  
under any one of the following circum-  
stances. Doing so can cause damage to  
the projector:  
Press the Auto Adjust button to fine-tune the computer image or to re-  
move any vertical banding that might appear and to reduce video noise,  
dot interference or cross talk (this is evident when part of your image  
appears to be shimmering). This function adjusts the clock frequencies  
that eliminate the horizontal banding in the image. This function also  
adjusts the clock phase to reduce video noise, dot interference or cross  
talk. (This is evident when part of your image appears to be shimmer-  
ing.)  
While the Hour Glass icon appears.  
While the cooling fans are running. (The  
cooling fans continue to work for 60 sec-  
onds after the projector is turned off).  
This adjustment may be necessary when you connect your computer  
for the first time.  
NOTE:  
• Some signals may not be displayed correctly or take time.  
• The Auto Adjust function does not work for component and video signal.  
• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock  
and Phase manually. See page E-28.  
Turning Up or Down Volume  
Sound level from the speaker and the AUDIO OUT jack (Stereo mini)  
on the projector can be adjusted.  
VOLUME  
increase volume  
decrease volume  
E-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONVENIENT FEATURES  
When using the USB Port  
Using the Remote Mouse Function  
The remote mouse function can only be used with a Windows 98, Win-  
dows Me, Windows XP, Windows 2000 or Mac OS operating system.  
The built-in remote mouse function enables you to operate your  
computer's mouse functions from the remote control (Computer mode).  
It is a great convenience for clicking through your computer-generated  
presentations. To return to the projector operation mode (Projector mode),  
press the PJ button (lit red).  
USB port (PC)  
Connecting to your computer for the remote mouse  
function  
If you wish to use the remote mouse function, use the supplied USB  
cable to connect the USB port (PC) of the projector and the USB port  
(type A) of your computer.  
USB cable  
(supplied)  
USB port  
NOTE: Depending on the type of connection or OS installed on your computer,  
(Type A)  
you may have to restart your computer or change your computer settings.  
NOTE: Wait at least 5 seconds after disconnecting the USB cable before recon-  
necting it and vice versa. The computer may not identify the built-in mouse re-  
ceiver if it is repeatedly connected and disconnected in rapid intervals.  
Switching operation mode between computer and projector  
The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.  
In the Computer mode the PJ button is not lit.  
Works as a mouse for your computer.  
Works as the SELECT button on the projector.  
OFF  
ON  
OFF  
ON  
POWER  
POWER  
VIDEO  
AUTO ADJ.  
VIDEO  
AUTO ADJ.  
S-VIDEO RGB  
S-VIDEO RGB  
Works as a right-click button  
for your computer.  
Works as the CANCEL  
button on the projector.  
SELECT  
SELECT  
PJ  
PJ  
Not lit  
Lit red  
PICTURE  
ASPECT  
PICTURE  
ASPECT  
HELP  
FREEZE PIC-MUTE  
MAGNIFY  
HELP  
FREEZE PIC-MUTE  
MAGNIFY  
Works as the ENTER  
button on the projector.  
Works as a left-click  
button for your com-  
puter.  
VOLUME  
VOLUME  
When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menu  
operation using the three buttons.  
If no buttons are pressed within 60 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the projector  
menu operation again, press the PJ button to light red.  
When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).  
During Computer mode:  
In Computer mode, by pressing the ENTER button for 2 seconds or more then releasing, the drag mode is set and the drag operation can be  
performed simply by pressing the SELECT GHFE (mouse) button. To drop the item, press the ENTER (left click) button again or press the  
CANCEL (right click) button.  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning Off the Image and Sound  
Getting the Information  
Press the PIC-MUTE button to turn off the image and sound for a short  
period of time. Press again to restore the image and sound.  
You get the information about the signal and projector settings.  
HELP  
PIC-MUTE  
SELECT  
Display Information  
Freezing a Picture  
Press the FREEZE button to freeze a picture. Press again to resume  
motion.  
Exit Information  
FREEZE  
Enlarging and Moving a Picture  
You can enlarge the picture up to 400 percent.  
To do so:  
1. Press the MAGNIFY (+) button to magnify the picture.  
To move the magnified image, use the SELECT button.  
MAGNIFY  
SELECT  
2. Return the image to the original size.  
MAGNIFY  
E-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING ON-SCREEN MENU  
6. Repeat steps 2-5 to adjust an additional item, or press the MENU  
button to close the menu.  
Basic Menu Operation  
Using the Menus  
NOTE: The on-screen menu may not be displayed correctly while interlaced mo-  
tion video image is projected.  
1. Press the MENU button on the remote control or projector cabinet to  
display the Menu.  
2. Press the SELECT GH buttons on the remote control or the projec-  
tor cabinet to highlight the menu for the item you want to adjust or  
set.  
3. Press the SELECT E button or the ENTER button on the remote  
control or the projector cabinet to select a submenu or item.  
4. Adjust the level or turn the selected item on or off by using SELECT  
F or E buttons on the remote control or the projector cabinet.  
The on-screen slide bar will show you the amount of increase or  
decrease.  
5. Changes are stored until you adjust it again.  
CANCEL ........ Return to the previous screen.  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
List of Menu Items  
Picture  
Brightness  
Contrast  
Sharpness  
Color  
Hue  
Picture Management  
Presentation, Video, Movie, Graphic, sRGB  
User  
Base Setting  
Presentation, Video, Movie, Graphic, sRGB  
Brightness R,G,B Contrast R,G,B  
White Balance  
Gamma Correction Dynamic, Black Detail, Natural  
Image  
Auto Keystone  
On, Off  
Keystone  
Keystone Save  
Aspect Ratio  
Cinema Position  
On, Off  
Normal, Wide Zoom, Cinema, Native  
Setup  
Lamp Mode  
Normal, Eco  
Language  
English, German, French, Italian, Spanish, Swedish, Japanese  
Color, Monochrome  
Menu Color Select  
Menu Display Time  
Background  
Manual, Auto 5 sec, Auto 15sec, Auto 45 sec  
Blue, Black, Logo  
Orientation  
Desktop Front, Ceiling Rear, Desktop Rear, Ceiling Front  
Advanced  
Control Panel Key Lock  
Power Management  
High Speed Fan Mode  
Signal Select RGB  
Video  
Enable, Disable  
On, Off  
On, Off  
RGB/Component, RGB, Component, Scart  
Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM  
Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM  
S-Video  
Page2  
Noise reduction  
Auto Adjust  
Vertical  
Off, Low, High  
On, Off  
Horizontal  
Clock  
Phase  
Information  
Information (page1)  
Information (page2)  
Information (page3)  
Source Index, Horizontal Frequency, Vertical Frequency, Sync Polarity  
Signal Type, Video Type, Sync Type, Interlace  
Remaining Lamp Time, Lamp Hour Meter, Filter Usage, Projector Usage  
Default  
Factory Default  
Factory Default  
Clear Filter Usage  
Clear Lamp Hour Meter  
Current Signal  
All Data  
NOTE: Some menu items are not available depending on the input source.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E-24  
Menu Elements  
Title  
Slide bar  
Radio button  
Source  
Highlight  
Check mark  
Solid triangle  
Tab  
Key symbol  
Thermometer symbol  
Menu windows or dialog boxes typically have the following elements:  
Title .................... Indicates the menu title.  
Highlight ............. Indicates the selected menu or item.  
Source................ Indicates the currently selected source.  
Solid triangle ...... Indicates further choices are available. A highlighted  
triangle indicates the item is active.  
Tab ..................... Indicates a group of features in a dialog box. Select-  
ing on any tab brings its page to the front.  
Radio button ....... Use this round button to select an option in a dialog  
box.  
Check mark ........ Indicates the item is selected.  
Slide bar ............. Indicates settings or the direction of adjustment.  
Key symbol ........ Indicates the Control Panel Key Lock is enabled.  
Thermometer symbol ... Indicates the lamp mode is forcibly set to Eco mode  
because the internal temperature is too high.  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Adjust (when using User )  
When selecting user adjustable presetting (User), the submenu will  
Menu Descriptions & Functions  
be displayed.  
You can customize each gamma or color. To do so, first select “User”  
and press the ENTER button, and then proceed the following steps.  
Picture  
Selecting Base Setting  
This feature allows you to use white balance or gamma values as  
reference data to optimize for various types of images. You can se-  
lect one of the following five settings.  
• Presentation  
• Video  
• Movie  
• Graphic  
• sRGB  
Adjusting White Balance <White Balance>  
Adjusting Brightness, Contrast, Sharpness, Color, Hue and Picture  
Management.  
This allows you to adjust the white balance. Brightness for each color  
(RGB) is used to adjust the black level of the screen; Contrast for  
each color (RGB) to adjust the white level of the screen.  
Brightness ...... Adjusts the brightness level or the back raster inten-  
sity.  
Selecting Gamma Correction Mode <Gamma>  
Each mode is recommended for :  
Dynamic ......... For true color reproduction of natural tones  
Contrast ......... Adjusts the intensity of the image according to the  
incoming signal.  
Black Detail .... For dark portions of a picture  
Natural ........... Normal settings  
Sharpness ..... Controls the detail of the image for Video.  
Color .............. Increases or decreases the color saturation level (not  
valid for RGB).  
Hue ................ Varies the color level from +/- green to +/-blue. The  
red level is used as reference. This adjustment is only  
valid for Video and Component inputs (not valid for  
RGB).  
Image  
Picture Management  
Enabling Auto Keystone <Auto Keystone>  
This feature allows the projector to detect its tilt and correct vertical  
distortion automatically.  
To turn on the Auto Keystone feature, select “On”.  
This option allows you to adjust neutral tint for yellow, cyan or ma-  
genta.  
There are 5 factory presets optimized for various types of images, or  
you can set user adjustable settings.  
Correcting Vertical Keystone Distortion Manually <Keystone>  
You can correct vertical distortion manually from the menu.  
You can save the changes using the Keystone Save feature when  
you turn off the projector.  
Presentation .. Recommended for making a presentation using a  
PowerPoint file  
Saving Vertical Keystone Correction <Keystone Save>  
This option enables you to save your current keystone settings.  
Saving your change once affects all sources. The changes are saved  
when the projector is off.  
Video ............. Recommended for regular picture such as TV pro-  
gram  
Movie ............. Recommended for movie  
Graphic .......... Recommended for graphics  
sRGB ............. Standard color values  
User ............... User adjustable  
NOTE: When “sRGB”, “Graphic”, “Video” or “Movie” is selected, the bright-  
ness decreases slightly when compared to “Presentation”. This is not a mal-  
function.  
E-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Aspect Ratio [ Aspect Ratio]  
Selecting Lamp Mode [Lamp Mode]  
Aspect Ratio allows you to select the best Aspect mode to display  
your source image. You can also display the Aspect Ratio window by  
pressing the “ASPECT” button on the remote control. (See page E-9).  
When 4:3 is selected from the source (i.e. DVD player), the following  
selections will display:  
This feature enables you to select two brightness modes of the lamp:  
Normal and Eco modes. The lamp life can be extended by using the  
Eco mode.  
Normal Mode ... This is the default setting (100% Brightness).  
Eco Mode ...... Select this mode to increase the lamp life (80% Bright-  
ness).  
Normal  
Wide Zoom  
Cinema  
Native  
NOTE: Thermometer symbol indicates the lamp mode is forcibly set to Eco  
mode because the internal temperature is too high.  
Selecting Menu Language [Language]  
Standard  
4:3 Aspect  
Left and right  
stretched  
Left and right  
stretched  
You can choose one of seven languages for on-screen instructions.  
The options are: English, German, French, Italian, Spanish, Swed-  
ish and Japanese.  
When 16:9 is selected from the source (i.e. DVD player), the follow-  
ing selections will display:  
Selecting Menu Color [Menu Color Select]  
You can choose between two color modes for menu color: color and  
monochrome.  
Normal  
Wide Zoom  
Cinema  
Native  
Selecting Menu Display Time [Menu Display Time]  
This option allows you to select how long the projector waits after the  
last touch of a button to turn off the menu.  
The preset choices are “Manual”, “Auto 5 sec”, “Auto 15 sec”, and  
“Auto 45 sec”. The “Auto 45 sec” is the factory preset.  
16:9 image  
displayed in  
4:3 mode  
Left and right  
stretched  
Left and right  
stretched to  
display the true  
aspect  
Selecting a Color or Logo for Background [Background]  
Use this feature to display a black/ blue screen or logo when no sig-  
nal is available.  
Native (RGB only): Turns off the Advanced AccuBlend feature. The  
projector displays the current image in its true resolution.  
Selecting Projector Orientation [Orientation]  
This reorients your image for your type of projection. The options  
are:  
desktop front projection, ceiling rear projection, desktop rear projec-  
tion, and ceiling front projection.  
NOTE:  
* While you are displaying an image with higher resolution than the projector’s  
native resolution, “Native” is not available.  
* You can adjust image positions for Cinema. See “Cinema Position” for set-  
ting image positions.  
Copyright  
Please note that using this projector for the purpose of commercial gain or  
the attraction of public attention in a venue such as a coffee shop or hotel and  
employing compression or expansion of the screen image with a "Aspect  
Ratio" setting may raise concern about the infringement of copyrights which  
are protected by copyright law.  
Advanced  
Adjusting the Vertical Position of Image [Cinema Position] (for Cin-  
ema only)  
This feature adjusts the vertical position of the image when viewing  
video with an aspect ratio selected.  
When “Cinema” is selected in “Aspect Ratio”, the image is displayed  
with black borders on the top and bottom.  
You can adjust the vertical position between top and bottom.  
NOTE: This option is available only when “Cinema” is selected in Aspect Ra-  
tio.  
Disabling the Cabinet Buttons [Control Panel Key Lock]  
This option turns on or off the Control Panel Key Lock function.  
Setup  
NOTE:  
* This Control Panel Key Lock does not affect the remote control and the PC  
Control functions.  
* When the cabinet buttons are disabled, pressing and holding the CANCEL  
button for about 10 seconds will change the setting to enable.  
* Key symbol  
indicates the Control Key Lock is enabled.  
Enabling Power Management [Power Management]  
When this option is on and there is no input for five minutes or more,  
the projector will automatically turn itself off.  
Enabling High Speed Fan Mode [High Speed Fan Mode]  
This option allows you to select two modes for fan speed: high-speed  
mode and normal speed mode.  
When you wish to cool down the temperature inside the projector  
quickly, select “On”.  
NOTE: Enable High Speed Fan mode if you continue to use the projector for  
consecutive days.  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Signal Format [Signal Select]  
<RGB>  
Adjusting Position/Clock (when Auto Adjust is off)  
This allows you to manually adjust the image horizontally and verti-  
cally, and adjust Clock and Phase.  
Allows you to choose “RGB” for an RGB source such as a computer,  
or “Component” for a component video source such as a DVD player.  
Normally select “RGB/Component” and the projector automatically  
detects a component signal. However there may be some compo-  
nent signals that the projector is unable to detect. If this is the case,  
select “Component”. Select “Scart” for the European Scart.  
<Horizontal/Vertical>  
Adjusts the image location horizontally and vertically.  
This adjustment is made automatically when theAutoAdjust is turned  
on.  
<Video & S-Video System Select>  
This feature enables you to select composite video standards manu-  
ally. Normally select “Auto”.  
When you select the video standard for Video and S-Video, select  
the video standard from the pull-down menu.  
This must be done for Video and S-Video respectively.  
<Clock>  
Use this item with the “Auto Adjust off” to fine tune the computer  
image or to remove any vertical banding that might appear. This func-  
tion adjusts the clock frequencies that eliminate the horizontal band-  
ing in the image. This adjustment may be necessary when you con-  
nect your computer for the first time. This adjustment is made auto-  
matically when the Auto Adjust is turned on.  
Page2  
<Phase>  
Use this item to adjust the clock phase or to reduce video noise, dot  
interference or cross talk. (This is evident when part of your image  
appears to be shimmering.)  
Use “Phase” only after the “Clock” is complete.  
This adjustment is made automatically when theAutoAdjust is turned  
on.  
Information  
Selecting Noise Reduction Level  
Select one of the three levels for reducing video noise: Off, Low, or  
High.  
NOTE: The lower the Noise Reduction level, the better the image quality by  
way of higher video bandwidth.  
Enabling Auto Adjust [Auto Adjust]  
When “Auto Adjust” is set to “On”, the projector automatically deter-  
mines the best resolution for the current RGB input signal to project  
an image using NEC’s Advanced AccuBlend Intelligent Pixel Blend-  
ing Technology.  
Displays the status of the current signal and lamp usage. This item has  
three pages. The information included is as follows:  
[Page 1]  
Source Index  
Horizontal Frequency  
Vertical Frequency  
Sync Polarity  
[Page 3]  
The image can be automatically adjusted for position and stability;  
“Horizontal Position”, “Vertical Position”, “Clock” and “Phase”.  
On .................. Automatically adjusts image “Horizontal Position”,  
“Vertical Position”, “Clock” and “Phase”.  
Remaining Lamp Time (%)*  
Lamp Hour Meter (H)  
Filter Usage  
Projector Usage  
Off .................. User can adjust the image display functions (“Hori-  
zontal Position”, “Vertical Position”, “Clock” and  
“Phase”) manually.  
* The progress indicator shows the  
percentage of remaining bulb life.  
The value informs you of the  
amount of lamp usage. When the  
remaining lamp time reaches 0,  
the Remaining Lamp Time bar in-  
dicator changes from 0% to 100  
Hours and starts counting down.  
If the remaining lamp time reaches  
0 hours, the projector will not turn  
on regardless of whether the lamp  
mode is set to Normal or Eco.  
[Page 2]  
Signal Type  
Video Type  
Sync Type  
Interlace  
E-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Default  
Returning to Factory Default  
The Factory Default feature allows you to change adjustments and set-  
ting to the factory preset for source except the following:  
<Current Signal>  
Resets the adjustments for the current signal to the factory preset lev-  
els.  
The items that can be reset are: Brightness, Contrast, Color, Hue, Sharp-  
ness, Aspect, Horizontal Position, Vertical Position, Clock, Phase and  
Color Correction.  
<All Data>  
Reset all the adjustments and settings for all the signals to the factory  
preset.  
The items can be reset except Language, Lamp Remaining Time, Lamp  
Hour Meter and Filter Usage. To reset the lamp usage time, see “Clear  
Lamp Hour Meter” and “Clear Filter Usage”.  
<Clear Filter Usage>  
Resets the filter usage back to zero. Selecting this option displays  
submenu for a confirmation.  
<Clear Lamp Hour Meter>  
Resets the lamp clock back to zero. Selecting this option displays  
submenu for a confirmation.  
NOTE: The projector will turn off and go into standby mode after 2100 hours (up  
to 3100 hours in Eco mode) of service. If this happens, press the “Help” button  
on the remote control for ten seconds to reset the lamp clock back to zero. Do  
this only after replacing the lamp.  
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
This section describes the simple maintenance procedures you should  
follow to replace the lamp and clean the filter.  
3. Insert a new lamp housing until the lamp housing is plugged into the  
socket.  
CAUTION  
Replacing the Lamp  
Do not use a lamp other than the replacement lamp.  
Order this from your dealer.  
After your lamp has been operating for 2000 hours (up to 3000 hours in  
Eco mode) or longer, the LAMP indicator in the cabinet will blink red  
and the message will appear. Even though the lamp may still be work-  
ing, replace it at 2000 (up to 3000 hours in Eco mode) hours to maintain  
optimal projector performance.  
Secure it in place with the two screws.  
Be sure to tighten the screws.  
CAUTION  
DO NOT TOUCH THE LAMP immediately after it has been used.  
It will be extremely hot. Turn the projector off, wait 60 seconds,  
turn off the main power switch and then disconnect the power  
cable. Allow at least one hour for the lamp to cool before han-  
dling.  
DO NOT REMOVE ANY SCREWS except the lamp cover screw  
and two lamp case screws. You could receive an electric shock.  
The projector will turn off and go into stand by mode after 2100  
(up to 3100 hours in Eco mode) hours of service. If this hap-  
pens, be sure to replace the lamp. If you continue to use the  
lamp after 2000 hours (up to 3000 hours in Eco mode) of use,  
the lamp bulb may shatter, and pieces of glass may be scat-  
tered in the lamp case. Do not touch them as the pieces of glass  
may cause injury. If this happens, contact your dealer for  
lamp replacement.  
4. Reattach the lamp cover.  
Tighten the lamp cover screw.  
Be sure to tighten the screw.  
To replace the lamp:  
1. Loosen the lamp cover screw until the screwdriver goes into a free-  
wheeling condition and remove the lamp cover. The lamp cover screw  
is not removable.  
Catch  
5. After you install a new lamp, select the menu [Default] [Clear  
Lamp Hour Meter] to reset the lamp usage hours.  
NOTE: When the lamp exceeds 2100 hours (up to 3100 hours in Eco mode)  
of service, the projector cannot turn on and the menu is not displayed. If this  
happens, press the Help button on the remote control for a minimum of 10  
seconds while in standby mode. When the lamp time clock is reset to zero,  
the LAMP indicator goes out.  
2. Loosen the two screws securing the lamp housing until the screw-  
driver goes into a freewheeling condition. The two screws are not  
removable.  
Remove the lamp housing by holding it.  
NOTE: There is an interlock on this case to prevent the risk of electrical shock.  
Do not attempt to circumvent this interlock.  
Catch  
Interlock  
E-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Reinstall the new filter cover.  
Cleaning  
Cleaning or Replacing the Filter  
The air-filter sponge keeps the inside of the projector from dust or dirt  
and should be cleaned after every 100 hours of operation (more often in  
dusty conditions). If the filter is dirty or clogged, your projector may over-  
heat.  
CAUTION  
Turn off the projector, turn off the main power switch and un-  
plug the projector before replacing the filter.  
Only clean the outside of the filter cover with a vacuum cleaner.  
Do not attempt to operate the projector without the filter cover.  
NOTE: Do not wash the filter with soap and water. Soap and water will damage  
the filter membrane. Before replacing the filter, remove dust and dirt from the  
projector cabinet. Keep out dust and during filter replacement.  
To clean the air-filter:  
NOTE: When you replace the lamp, it is also wise to replace the filter. The filter  
comes in the same package with your replacement lamp.  
Vacuum the filter-through the filter cover.  
Cleaning the Cabinet and the Lens  
To reset the filter usage time, from the menu, select [Default] [Clear  
Filter Usage].  
See also page E-29 for resetting the filter usage time.  
To replace the filter (sponge):  
1. Remove the filter cover by pushing up on the catch of the cover until  
you feel it detach.  
1. Turn off the projector before cleaning.  
2. Clean the cabinet periodically with a damp cloth. If heavily soiled,  
use a mild detergent. Never use strong detergents or solvents such  
as alcohol or thinner.  
Catch  
3. Use a blower or lens paper to clean the lens, and be careful not to  
scratch or mar the lens.  
2. Gently peel off the filter (sponge) and replace it with the new one.  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
This section helps you resolve problems you may encounter while setting up or using the projector.  
Power Indicator  
Indicator Condition  
Off  
Projector Condition  
Note  
The main power is off  
Blinking light  
Steady light  
Green blinking  
0.5 sec ON,  
0.5 sec OFF  
0.5 sec ON,  
0.5 sec OFF  
The projector is getting ready Wait for a moment.  
to turn on.  
Orange blinking  
The projector is cooling down. Wait for a moment.  
Green  
The projector is turned on.  
The projector is in Standby.  
Orange  
Status Indicator  
Indicator Condition  
Off  
Red blinking  
Projector Condition  
Note  
Normal  
Blinking light  
1 cycle (0.5 sec ON, Lamp cover error or lamp Replace the lamp cover or  
2.5 sec OFF)  
housing error  
lamp housing correctly.  
The projector is overheated.  
Move the projector to a cooler  
location.  
2 cycle (0.5 sec ON, Temperature error  
0.5 sec OFF)  
4 cycle (0.5 sec ON, Fan error  
0.5 sec OFF)  
Fans will not work correctly.  
6 cycle (0.5 sec ON, Lamp error  
0.5 sec OFF)  
Lamp fails to light. Wait a full  
minute and then turn on again.  
The projector is re-firing.  
Green blinking  
Orange  
Re-firing the lamp  
Steady light  
Control key locked  
You have pressed control  
panel key when Control Key  
Lock is enabled.  
Lamp Indicator  
Indicator Condition  
Projector Condition  
Normal  
Note  
Off  
Blinking light  
Steady light  
Red  
Lamp has reached its end of Replace the lamp.  
life. Lamp replacement mes-  
sage will be displayed.  
Red  
Lamp has been used beyond Replace the lamp.  
its limit. The projector will not  
turn on until the lamp is re-  
placed.  
Green  
Lamp mode is set to Eco mode  
E-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Common Problems & Solutions  
Problem  
Check These Items  
Does not turn on  
Check that the power cable is plugged in and that the power button on the projector cabinet or the remote  
control is on. See pages E-16 and 17.  
Ensure that the lamp cover or lamp housing is installed correctly. See page E-30.  
Check to see if the projector has overheated or the lamp has reached the end of its usable life. If there is  
insufficient ventilation around the projector or if the room where you’re presenting is particularly warm, move  
the projector to a cooler location.  
No picture  
Use the RGB, Video or S-Video button on the remote control or the cabinet to select your source (RGB, Video  
or S-Video). See page E-18.  
Ensure your cables are connected properly.  
Use menus to adjust the brightness and contrast. See page E-26.  
Remove the lens cap.  
Reset the settings or adjustments to factory preset levels using “Factory Default” in the menu. See page E-29.  
Image isn’t square to the  
screen  
Reposition the projector to improve its angle to the screen. See page E-18.  
Use the Keystone correction function to correct the trapezoid distortion. See page E-19.  
Picture is blurred  
Adjust the focus. See page E-19.  
Reposition the projector to improve its angle to the screen. See page E-18.  
Ensure that the distance between the projector and screen is within the adjustment range of the lens. See  
pages E-11 and 12.  
Condensation may form on the lens if the projector is cold, brought into a warm place and is then turned on.  
Should this happen, let the projector stand until there is no condensation on the lens.  
Image is scrolling verti-  
cally, horizontally or  
both  
Use the RGB, VIDEO or S-VIDEO button on the remote control or the cabinet to select the source you want to  
input.  
Remote control does  
not work  
Install new batteries. See page E-10.  
Make sure there are no obstacles between you and the projector.  
Stand within 22 feet (7 m) of the projector. See page E-10.  
Make sure that you are in the Projector mode and the PJ button lights in red. If not, press the PJ button. See  
page E-21.  
Indicator is lit or blink-  
ing  
See the Power/Status/Lamp Indicator on page E-32.  
Cross color in RGB  
mode  
If Auto Adjust is off, turn it on or adjust the image manually with Horizontal / Vertical / Clock / Phase in the  
Advanced menu. See page E-28.  
E-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
This section provides technical information about the 8766 Projector's performance  
Model Number  
8766  
Optical  
LCD Panel  
0.7" p-Si TFT active-matrix with Micro Lens Array  
Resolution  
Lens  
1024
ן
768 pixels native, up to UXGA  
Manual zoom and focus:  
F1.7 - 2.0 f=21.6 - 25.9mm  
Lamp  
200 W (160 W Eco mode)  
Image Size  
21 - 300 inches (0.5 - 7.6 m) diagonal  
2.38 - 35.8 ft / 7.3 (Tele) - 10.9 m (Tele)  
Tele : 9.5° - 10.0° Wide : 11.3° - 11.8°  
+/- 30 degrees electronic (auto)  
Projection Distance  
Projection Angle  
Keystone Correction  
Electrical  
Inputs  
1 RGB/Component (D-Sub 15 Pin), 1 S-Video (DIN 4 Pin), 1 Video (RCA),  
1 Stereo Mini Audio, 2 (L/R) RCA Audio, 1 PC Control (DIN 8 Pin)  
Outputs  
1 RGB (D-Sub 15 Pin), 1 Stereo Mini Audio  
USB Port  
1 B Type  
Video Compatibility  
NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV: 1080i, 1080i/50Hz, 720p, 576p, 480p, 480i/  
60Hz  
Scan Rate  
Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 50 Hz to 120 Hz  
RGB: 80 MHz (-3dB)  
Video Bandwidth  
Color Reproduction  
Horizontal Resolution  
16.7 million colors simultaneously, Full color  
NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 550 TV lines  
SECAM: 350 TV lines  
YCbCr: 800 TV lines  
RGB: dots (H)
ן
768 dots (V)  
External Control  
Sync Compatibility  
Built-in Speaker  
Power Requirement  
Input Current  
RS232, IR  
Separate Sync / Composite Sync / Sync on G  
1W (monaural)  
100 - 120V AC / 200 - 240V AC, 50 / 60 Hz  
2.9A (100 - 120V AC) / 1.4A (200 - 240V AC)  
7.5W in Standby mode / 260 W in Lamp Normal mode / 220 W in Lamp Eco mode  
Power Consumption  
Mechanical  
Installation Orientation  
Dimensions  
Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear  
12.2" (W)
ן
3.5" (H)
ן
9.1" (D)  
310mm (W)
ן
89mm (H)
ן
230mm (D)  
(not including protrusions)  
Net Weight  
6.5 lbs / 2.9 kg  
Environmental Considerations  
Operational Temperatures : 32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)  
Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)  
UL Approved (UL 60950, CSA 60950)  
Regulations  
Meets DOC Canada Class B requirements  
Meets FCC Class B requirements  
Meets AS/NZS3548 Class B  
Meets EMC Directive (EN55022:1998, EN55024-1998, EN61000-3-2, EN61000-3-3)  
Meets Low Voltage Directive (EN60950, TUV GS Approved)  
For additional information visit:  
http://www.dukcorp.com/av  
The specifications are subject to change without notice.  
E-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Cabinet Dimensions  
89(3.5")  
310(12.2")  
Lens center  
73.5(2.9")  
Lens center  
Unit = mm (inch)  
Pin Assignments of D-Sub RGB Input Connector  
Mini D-Sub 15 Pin Connector  
Pin No.  
RGB Signal (Analog)  
YCbCr Signal  
5
4
3
2
1
10  
9
8
7
6
1
2
Red  
Cr  
Y
15 14 13 12 11  
Green or Sync on Green  
Blue  
3
Cb  
Signal Level  
Video signal : 0.7Vp-p (Analog)  
Sync signal : TTL level  
4
Ground  
5
Ground  
6
Red Ground  
Cr Ground  
Y Ground  
Cb Ground  
7
Green Ground  
Blue Ground  
8
9
No Connection  
Sync Signal Ground  
SCART Sync  
10  
11  
12  
13  
14  
15  
Sync  
Bi-directional DATA (SDA)  
Horizontal Sync or Composite Sync  
Vertical Sync  
Data Clock  
E-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compatible Input Signal List  
Signal  
Resolution  
( Dots )  
Frequency H.  
( kHz )  
Refresh Rate  
( Hz )  
NTSC  
15.734  
60  
PAL  
15.625  
15.625  
31.47  
31.47  
31.47  
34.97  
35  
50  
SECAM  
VESA  
50  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
720 
ן
 350  
720 
ן
 400  
720 
ן
 350  
720 
ן
 400  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
832 
ן
 624  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1152 
ן
 864  
1152 
ן
 870  
1152 
ן
 900  
1152 
ן
 900  
1280 
ן
 960  
1280 
ן
 1024  
1280 
ן
 1024  
1280 
ן
 1024  
1280 
ן
 1024  
1280 
ן
 1024  
1280 
ן
 1024  
1400 
ן
 1050  
1920 
ן
 1080  
59.94  
IBM  
60  
MAC  
60  
MAC  
66.67  
MAC  
66.67  
VESA  
37.86  
37.5  
72.81  
VESA  
75  
IBM  
39.375  
43.269  
31.469  
37.927  
39.44  
39.44  
35.16  
37.879  
48.077  
46.88  
53.674  
49.725  
35.5  
75  
VESA  
85.01  
IBM  
70.09  
VESA  
85.04  
IBM  
87.85  
IBM  
87.85  
VESA  
56.25  
VESA  
60.32  
VESA  
72.19  
VESA  
75  
VESA  
85.06  
MAC  
74.55  
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
VESA  
43 Interlaced  
VESA  
48.363  
56.476  
60.241  
60.023  
68.677  
67.5  
60  
VESA  
70.07  
MAC  
74.93  
VESA  
75.03  
VESA  
85  
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
VESA  
75  
MAC  
68.681  
61.796  
71.736  
60  
75.06  
SUN  
65.95  
SGI  
76.05  
VESA  
60  
VESA  
63.981  
69.89  
78.125  
81.13  
79.976  
91.146  
60.02  
MAC  
65.2  
HP  
72.01  
SUN  
76.11  
VESA  
75.03  
VESA  
85.02  
SXGA+  
HDTV (1080p)  
SDTV(576i)(625i)  
SDTV(576p)(625p)  
HDTV (1080i)(1125i)  
HDTV (1080i)(1125i)  
HDTV (720p)(750p)  
SDTV (480p)(525p)  
VESA  
67.5  
60  
15.6  
50  
31.5  
50  
1920 
ן
 1080  
1920 
ן
 1080  
1280 
ן
 720  
33.75  
28.13  
45  
60 Interlace  
50 Interlace  
60 Progressive  
59.94 Progressive  
60  
31.47  
75.0  
1600 
ן
 1200  
1600 
ן
 1200  
1600 
ן
 1200  
1600 
ן
 1200  
VESA  
81.3  
65  
VESA  
87.5  
70  
VESA  
93.75  
15.734  
15.625  
75  
DVD YCbCr  
DVD YCbCr  
59.94 Interlaced  
50 Interlaced  
# : Images in above flagged with # are compressed.  
NOTE: Some composite sync signals may not be displayed correctly.  
Signals other than those specified in the table above may not be displayed correctly. If this should happen, change  
the refresh rate or resolution on your PC. Refer to Display Properties help section of your PC for procedures.  
UXGA (1600
ן
1200) is supported for separate sync signal only.  
E-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUKANE CORPORATION  
TWO-YEAR LIMITED WARRANTY  
This Dukane projector is warranted to the original purchaser for a period of two (2) years from  
the original purchase date – in normal operating conditions – against defects in material and  
workmanship . DUKANE CORPORATION EXPRESSLY DISCLAIMS ALL OTHER  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
DURING THE WARRANTY PERIOD, DUKANE CORPORATION’S LIABILITY FOR ANY  
DEFECTIVE PRODUCT (except for the lamp, which is subject to whatever warranties the  
manufacturer may provide) IS LIMITED TO THE REPAIR OR REPLACEMENT OF  
PRODUCT AT DUKANE CORPORATION’S OPTION. REPLACEMENT PRODUCTS MAY  
BE NEW OR USED (used units will not exceed hours of defective unit). The following are not  
covered by the limited warranty and Dukane Corporation shall not be liable for:  
1. Any product which is not distributed in the U.S.A. or Canada by Dukane Corporation or an  
authorized dealer.  
2. Normal decrease in lamp light output over time.  
3. Damage, deterioration or malfunction resulting from:  
·
Accident, misuse, abuse, neglect, improper ventilation, fire, dust, smoke, water, lighting  
or other acts of nature, unauthorized product modification, or failure to follow  
instructions supplied with the product (including proper maintenance of air filters).  
Repair or attempted repair by anyone other than a Dukane Corporation authorized service  
center.  
·
·
·
·
·
Any shipment of product (claims must be presented to the carrier).  
Removal or installation of the product.  
Any other causes which do not relate to a product defect.  
Use of the product beyond normal operating conditions. Normal operating conditions are  
defined as product use not in excess of 8 hours per day and 260 days per year.  
4. Cartons, carry cases, shipping cases, batteries, or any accessories used in connection with the  
product.  
5. Service required as a result of third party components.  
6. Product used as commercial rental units  
Dukane corporation will pay labor and material expenses for covered items, but Dukane  
Corporation will not pay for the following:  
1. Removal or installation charges.  
2. Cost of technical adjustment, set-up, maintenance, or adjustment of user controls.  
3. Payment of shipping and related charges incurred in returning the product for warranty  
repair.  
Dukane Corporation disclaims all liability for incidental or consequential damage of any kind,  
including all damages arising out of any interruptions in operation of the product and all damages  
to software.  
No person, firm, or representative is authorized to assume any obligation or to make any warranty  
on behalf of the Dukane Corporation other than as stated above.  
11595-B-04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Visual Products  
Dukane Corporation  
Audio Visual Products Division  
2900 Dukane Drive  
St. Charles, IL 60174-3395  
Phone: (630) 762-4040  
Orders: (800) 676-2485  
Information: (800) 676-2486  
Fax: (630) 584-5156  
Parts & Service: (800) 676-2487  
Fax: (630) 584-0984  
401-8766-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Code Alarm Automobile Alarm CA 430 User Manual
Craftsman Lawn Mower 917377542 User Manual
Creative MP3 Player FX200 User Manual
Cuisinart Mixer HSM 70 User Manual
Delta Electronics Power Supply Q48DV User Manual
Edelbrock Automobile Parts 1926 User Manual
Electro Voice Computer Monitor 1252 User Manual
EverFocus Car Video System EN 7517C User Manual
GE Monogram Ventilation Hood ZXR7510 User Manual
Generac Power Systems Switch R 200A User Manual