Supernatenl
A M B I E N T V E R B
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to dispose of this product, do not mix it with general household waste.
There is a separate collection system for used electronic products in accordance with
legislation that requires proper treatment, recovery, and recycling.
WARNING
For your protection, read the following:
Private households in the 25 member states of the EU, in Switzerland and Norway may return their
used electronic product free of charge to designated collection facilities or to a retailer (if you
purchase a similar new one).
Important Safety Instructions
For countries not mentioned above, please contact your local authorities for a correct method of
disposal.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery,
and recycling and thus prevent potential negative effects on the environment and human health.
4. Do not use this apparatus near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
8. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
9. Unplug this apparatus during lightning storms or when
unused for long periods of time.
10. No user serviceable parts inside. Refer all servicing to
qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
11.WARNING:To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
12. Refer to labels on the unit, including bottom cover, for
ELECTROMAGNETIC
COMPATIBILITY
This device complies with part 15 of the FCC Rules
and the Product Specifications noted on the Declara-
tion of Conformity. Operation is subject to the fol-
lowing two conditions:
•
•
this device may not cause harmful interference,
and
this device must accept any interference received,
including interference that may cause undesired
operation.
Operation of this unit within significant
electromagnetic fields should be avoided.
•
use only shielded interconnecting cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
other markings and pertinent information.
WARRANTY:
We at DigiTech® are very proud of our products and back-up each one we sell with the following warranty:
valid only in the United States.
2. DigiTech warrants this product, when purchased new from an authorized U.S. DigiTech dealer and used solely within
the U.S., to be free from defects in materials and workmanship under normal use and service.This warranty is valid
to the original purchaser only and is non-transferable.
3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of
defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION, where all parts and labor
will be covered up to a period of one year (this warranty is extended to a period of six years when the product
has been properly registered through our website).A Return Authorization number may be obtained from DigiTech
by telephone.The company shall not be liable for any consequential damage as a result of the product’s use in any
circuit or assembly.
4. Proof-of-purchase is considered to be the responsibility of the consumer.A copy of the original purchase receipt
must be provided for any warranty service.
5. DigiTech reserves the right to make changes in design, or make additions to, or improvements upon this product
without incurring any obligation to install the same on products previously manufactured.
6. The consumer forfeits the benefits of this warranty if the product’s main assembly is opened and tampered with by
anyone other than a certified DigiTech technician or, if the product is used with AC voltages outside of the range
suggested by the manufacturer.
7. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor authorizes
any person to assume any obligation or liability in connection with the sale of this product. In no event shall DigiTech
or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty
due to causes beyond their control.
NOTE: The information contained in this manual is subject to change at any time without notification. Some information
contained in this manual may also be inaccurate due to undocumented changes in the product or operating system since
this version of the manual was completed.The information contained in this version of the owner’s manual supersedes all
previous versions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations!
You have just purchased a DigiTech® digital effect pedal.
Unlike many analog pedals, the number of hours digital pedals can be powered
with 9-Volt alkaline batteries is limited due to the constant draw which digital
signal processors require. Until battery technology advances to meet the
requirements of digital pedals, we suggest that a battery be used mainly for
demonstration and practice purposes.
If you notice a change in the LED’s brightness, or the pedal will not switch from
Bypass to Effect, replace the battery with a new 9-Volt alkaline battery or visit
your local DigiTech dealer to obtain the optional power adapter and unleash the
pedal’s full potential with unlimited power.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
More than a remarkable achievement, DigiTech’s HardWire® series represents
a collection of significant improvements in guitar effects pedals.The HardWire
series pedals provide a suite of well-known effects, each with superior tone
and control. But these pedals go above and beyond their peers, providing such
distinguishing features as true bypass, high voltage operation and true stereo
processing with genuine Lexicon® reverbs, making them essential additions to the
signal chain of players who know about sound quality and demand the utmost in
performance.
Included Items:
•
•
•
•
•
HardWire Supernatural Stereo Reverb
StompLock™
Foot Switch Glow Sticker
Hook-and-loop Pedalboard Pad
Online Warranty Registration Information Card
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2 3
4
5
Pedal Interface
M I X
L I V E L I N E S S
D E C AY
11
6
7
8
12
8
Supernatural
A
M
B
I
E
N
T
V
E
R
B
9
10
2
Download from Www.Somanuals.com. All Manuals Search And Download.
What Does This Do?
1. Mix Knob - Controls the reverb level.Turn this knob clockwise to
increase and counter-clockwise to decrease the reverb level.
2. DC Adapter Jack - Connect the optional power supply to this jack.
Use the proper supply for your area’s mains line voltage.
3. Liveliness Knob - Controls the amount of high frequency response
in the Reverb’s effect signal.Turn this knob clockwise to increase and
counter-clockwise to decrease the high frequencies.
4. Decay Knob - Controls the length of time it takes for the Reverb to
fade out.Turn this knob clockwise to increase and counter-clockwise to
decrease the reverb decay time.
5. Type Knob - Selects one of 7 Lexicon® reverbs:
• plate -The classic studio reverb heard on countless hit records.
• plate mod - Plate reverb sweetened with chorus.
• shimmer - Ethereal reverb with cascading octave shifts.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• supernova - Deep space reverb with twisting flange and pitch
shifting.
• shine - Shimmer reverb with a thick lush chorus added.
• pherb - Rich Lexicon Hall reverb with a hint of phasing.
• spring -The unmistakable classic ‘surf’ reverb.
6. Input 1 (Mono) - Connect your instrument, the output of a pedal, or
an amp effects send to this jack. Signals are heard at both outputs when
only the Input 1 (Mono) jack is used.This jack enables battery power to
the pedal when connected.To prolong battery life, disconnect the cable
from the Input 1 (Mono) jack when not in use. If the optional Harman
power supply is used, cables can remain connected.
7. Input 2 - Connect a second input to this jack for stereo operation.
Inputs 1 and 2 are processed separately through the Stereo Reverb
effect then fed to Outputs 1 and 2 keeping true stereo separation
between channels.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Foot Switch Release Pins -These two pins are spring loaded
hinges that hold the Foot Switch in place. See page 10 for information
on accessing and changing the battery. See page 6 for more information
about using and changing theTails Switch settings.
9. Indicator LED - Lights when the effect is turned on.When battery
power is low (approximately 15 minutes), the Indicator LED begins to
dim giving you advanced warning that very shortly you will need to
replace the battery.
10. Foot Switch -Turns the effect on and off.
11. Output 1 (Mono) - Connect this output to the input of a single
guitar amplifier or amp effects return.
12. Output 2 - Connect this output to the input of a second guitar
amplifier when a second amp is being used.
Note: Use unbalanced mono instrument cables only.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Tails Switch
The Supernatural features a switch that allows the reverb signal to continue
being heard after the effect is bypassed.When theTails Switch is set ON, the
Supernatural does not utilize true hardwire bypass. If you always want to use
true hardwire bypass, set theTails Switch to OFF.When theTails Switch is OFF,
reverb signal is cut off immediately when the effect is bypassed.
TheTails Switch is located under the Foot Switch and is accessed by pressing
in one of the Foot Switch Release Pins using the tip of a 1/4" guitar cable plug.
Once the Foot Switch is removed, theTails Switch is visible inside the chassis
next to the button switch that turns the effect on and off. Slide the switch to the
left to turnTails ON and to the right to turnTails OFF.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier Setup
Optional
Power
Supply
M
I
X
L
I
V
E
L
I
N
E
S
S
D
E
C
AY
or
Supernatural
A
M
B
I
E
N
T
V
E
R
B
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Effects Setup
AMP RETURN
AMP SEND
Optional
Power
Supply
M
I
X
L
I
V
E
L
I
N
E
S
S
D
E
C
AY
Supernatural
A
M
B
I
E
N
T
V
E
R
B
Note: If the amp effects loop has a mix control, set the mix to 100% full wet.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Battery Operation
In the event that battery power is completely depleted, HardWire pedals
automatically switch into bypass.This eliminates the need to remove the pedal
from your pedal chain if the battery is dead.To replace the battery, do the
following:
1. Using the tip of a 1/4” guitar cable, push one of the Release Pins in on
either side of the Foot Switch, and remove it from the pedal chassis.
2. Remove the battery from the battery compartment and disconnect
the battery cable.
3. Connect a new battery to the battery cable and put it back in the
battery compartment. Make sure the battery cable does not interfere
with the spring or pedal switch arm.
4. Place one hole of the Foot Switch over its corresponding pin.
5. Push the opposite pin in and lower the other side of the Foot Switch
10
Download from Www.Somanuals.com. All Manuals Search And Download.
into place over the depressed pin. Release the pin.When the Foot
Switch is properly fastened, both release pins are flush with the outer
side of
Foot Switch
the pedal.
Pedal Switch
Arm
9VDC Battery
Foot Switch
Release Pin
Battery
Compartment
Foot Switch
Release Pin
Spring
Pedal Chassis
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Performance Accessories
The performance accessories make integrating a HardWire pedal into any pedal
board a snap.The following accessories are included:
•
Hook-and-loop Pedalboard Pad (designed to attach to the surfaces
found on most commercial pedalboards)
•
•
Foot Switch Glow Sticker (easily visible on dark stages)
StompLock™ (keeps your settings where you want them)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Hook-and-loop Pedalboard Pad
To attach the Pedalboard Pad, do the following:
1. Peel off the existing rubber skid pad from the bottom of the pedal.
2. Peel the adhesive protector from the back of the Pedalboard Pad.
3. Apply the Pedalboard Pad to the bottom of the pedal.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Foot Switch Glow Sticker
To attach the Foot Switch Glow Sticker, do the following:
1. Peel the adhesive backing from the Foot Switch Glow Sticker.
2. Apply the Glow Sticker to the top of the Foot Switch.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
StompLock
To place the StompLock over the pedal knobs, do the following:
1. Set the knobs to your preferred setting.
2. Gently push the StompLock over the top of the knobs.
3. To remove the StompLock, gently lift one side and then the other.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Controls:
Level, Liveliness, Decay,Type, On/Off Pedal
Input 1 (Mono), Input 2, Output 1 (Mono), Output 2
>1 MΩ (stereo), >500 kΩ (mono) - effect on
1 kΩ - effect on
Jacks:
Input Impedance:
Output Impedance:
Input Impedance:
Output Impedance:
Power Supply:
Current Draw:
Power Consumption:
Dimensions:
True hardwire bypass - effect off
True hardwire bypass - effect off
9V Alkaline Dry Battery or Harman 9VDC power supply
75 mA (typical at 9VDC)
675 mW (typical w/optional power supply)
5.25”(L) x 3.5”(W) x 2.15”(H)
Weight:
1.3 lbs.
Optional Power Supply:
PS0913DC-01 (JA, US, EU) (100-240VDC, 50/60 Hz)
PS0913DC-02 (UK, AU) (100-240VDC, 50/60 Hz)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
8760 South Sandy Parkway
Sandy, Utah 84070
PH (801) 566-8800
FAX (801) 566-7005
DigiTech® and HardWire® are
registered trademarks of Harman
Designed in the USA
Copyright - Harman
Printed in China
HardWire® Supernatural
Owners Manual 5020843-B
Please visit our
website at:
Download from Www.Somanuals.com. All Manuals Search And Download.
|