Desa Tech Fire Pit EF5802R User Manual

EF5802R  
Freestanding  
Electric Fireplace  
Installation Instructions and Homeowner's Manual  
WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED  
EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL  
INJURY OR LOSS OF LIFE.  
Comfort Home Products, Inc.  
FOR YOUR SAFETY  
DO NOT STORE  
OR USE GASOLINE OR  
OTHER FLAMMABLE VAPORS  
12256 William Penn Hwy, Suite A  
Huntingdon, PA 16652  
Made in China  
Printed in China  
OR LIQUIDS  
IN THE VICINITY OF THIS OR  
ANY OTHER APPLIANCE  
COMFORT GLOW PHONE NUMBER: (814) 643-1775  
ANSI/UL 1278. MOVABLE AND WALL-OR CEILING HUNG ELECTRIC ROOM HEATERS  
INSTALLER: DO NOT DISCARD THIS MANUAL - LEAVE FOR HOME OWNER  
CUSTOMER: PLEASE RETAIN THIS MANUAL FOR FUTURE USE  
-1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
PLEASE RETAIN THIS USER’S GUIDE FOR FUTURE REFERENCE  
When using electrical appliances, basic precautions should always be followed to reduce the risk of  
fire, electric shock, and injury to person, including following:  
1. Read all instructions before using this appliance.  
such as a bed, where openings may become  
blocked.  
2. This fireplace is hot when in use. To avoid burns,  
do not let bare skin touch hot surfaces. The grill  
directly in front of the heater outlet becomes hot  
during heater operation. Keep combustible materials,  
such as furniture, pillows, bedding, papers, clothes,  
and curtains at least 3 feet from the front of the unit.  
13. CAUTION: This appliance gets hot and it  
contains internal parts that could arc or spark. Do  
not use it in areas where gasoline, paint, or  
flammable liquids are used or stored. This electric  
fireplace should not be used as a drying rack for  
clothing. Also, do not have Christmas stockings or  
decorations hung on or near it.  
3. CAUTION: Extreme caution is necessary  
when any heater is used by or near children or  
invalids and whenever the heater is left  
operating and unattended.  
14. Do not modify this fireplace. Use it only as  
described in this manual. Any other use not  
recommended by the manufacturer may cause fire,  
electric shock or injury to persons.  
4. Always unplug heater when not in use.  
5. Do not operate any fireplaces with a damaged  
cord or plug or after the heater has  
15. Avoid the use of an extension cord because it  
may overheat and cause a fire hazard. However if  
you must use an extension cord, the cord shall be  
16 AWG, 1875 Watts.  
malfunctioned, or if the fireplace has been  
dropped or damaged in any manner. Take the  
fireplace to a authorized service facility for  
examination, electrical or mechanical  
adjustment or repair.  
16. Do not burn wood or other materials in this  
fireplace.  
6. Do not use outdoors.  
17. Do not strike fireplace glass.  
7. This fireplace is not intended for use in  
bathrooms, laundry areas or similar indoor locations.  
Never locate the fireplace where it may fall into a  
bathtub or other water container.  
18. Always use a certified electrician should new  
circuits or outlets been required.  
19. Always use properly grounded, fused, and  
polarized outlets.  
8. Do not install the fireplace directly on carpet or a  
similar surface, which may restrict air circulation  
beneath the unit.  
20. Always use ground fault protection where  
required by electrical code.  
21. Always disconnect power before performing any  
cleaning, maintenance or relocation of the fireplace.  
9. Do not run cord under carpeting. Do not cover  
cord with throw rugs, runners or the like. Arrange  
cord away from traffic areas and where it will not be  
tripped over  
22. When transporting or sorting the fireplace and  
cord, keep in a dry place, free from excessive  
vibration and store so as to avoid damage.  
10. To disconnect fireplace, turn controls to the off  
position and remove plug from outlet. .  
23. Do not plug this product into a receptacle  
controlled by a wall switch or dimmer.  
11. Do not insert or allow foreign objects to enter  
any ventilation or exhaust opening as this may  
cause electric shock, fire or damage to the  
appliance.  
24. Do not exceed recommended bulb wattage.  
Using a higher wattage bulb could create a fire  
hazard or cause damage to your electric fireplace.  
25. SAVE THESE INSTRUCTIONS.  
12. To prevent fire, do not block air intakes or  
exhaust in any manner. Do not use on soft surfaces,  
-3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING: Procedures and  
techniques, which, if not  
carefully followed, will result  
in damage to the equipment  
or personal property or may  
cause personal injury.  
WARNING: Procedures and  
techniques, which, if not  
carefully followed, will expose  
the user to the risk of serious  
injury, illness or death.  
WARNING: This is a 1500 watt heater and parts become hot when in use. Be sure to maintain  
a personal distance and keep any combustible material at least three (3) feet away from  
the front of the heater. The area directly behind, around and under the heater must be clear  
and free of any obstructions.  
KEEP CHILDREN AND PETS AWAY FROM HEATER AND CONTROLS  
LOCATING YOUR ELECTRIC FIREPLACE  
Your new freestanding electric fireplace may be installed virtually anywhere in your home.  
However, when choosing a location for your new electric fireplace, ensure that the general  
instructions are followed. For best results, install the electric fireplace out of direct sunlight.  
CLEARANCE TO COMBUSTIBLES  
ELECTRICAL SPECIFICATIONS  
Back………….…0"/0mm  
Sides……………0"/0mm  
Floor…….………0"/0mm  
Top…….........….24"/610mm  
Front..................36”/915mm  
Voltage................120 VAC/60Hz  
Total Amps...........11.3 Amps  
Total Watts...........1500 Watts  
Heater Ratings.....1400 Watts (+5%, -10%)  
ELECTRICAL CONNECTION  
A 15 AMP, 120 Volt, 60Hz circuit with a properly grounded outlet is required. Preferably, the heater will  
be on a dedicated circuit. Other appliances on the same circuit may cause the circuit breaker to trip or  
the fuse to blow when the heater is in operation. The unit comes standard with a 6' (1828mm) long  
three wire cord exiting from the rear of the fireplace. Plan the installation to avoid the use of an  
extension cord. If an extension cord must be used, it must be a minimum 16 AWG three wire with  
grounding type plug connector and rated no less than 1900 Watts.  
WARNING: Electrical  
outlet wiring must comply with  
local building codes and all  
other applicable  
WARNING: Do not use this  
fireplace if any part of it has  
been under water. Immediately  
call a qualified service  
regulations to reduce the risk  
of fire, electrical shock and  
injury.  
technician to inspect the  
fireplace and replace any part  
of the electrical system if  
necessary.  
-4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
Note: Ensure the circuit breakers for the power supply are turned on.  
The controls are located behind the grill below front glass and can be accessed by pulling the grill  
up from the top, forward and down.  
Main Power On/Off  
Press this button for main power. The indicator light will turn on.  
1. ON/OFF Button: Main power and flame effect. The red indicator light will turn on when heater is  
on.  
2. FLAME: Press this button once for flame effect. The unit will beep and the indicator light will turn  
on. The bulbs for flame effect & log set will be on. Pressing button again will turn off the light  
function. Keep pressing down this button, the flame/log light will turn from bright to dim.  
3. 750W: For low heat function - Press this switch while the ON/OFF switch is in the ON position.  
The indicator light will turn on. Pressing button again will turn off the low heat function.  
4. 1500W: For high heat function - Press this switch while the ON/OFF switch and the 750W switch  
are in the ON position for high heat. The indicator light will turn on. Pressing button again will turn  
off the high heat function.  
5. Temperature Control: To adjust the temperature to your individual requirements, turn the  
temperature control dial to the right (clockwise) to increase the desired temperature and to the left  
for lower temperature. This temperature control dial can only be used while the ON/OFF switch and  
750W & 1500W switches are in the ON position. When the heater reaches the desired temperature  
the heater and 750W/1500W indicator light will turn off and the fan will stop working for air flow.  
Note: When the ON/OFF switch is turned OFF, all other heater functions will stop even though the  
other switches may be in the ON position.  
-5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTIONS FOR REMOTE OPERATION  
Plug in your electric fireplace, and turn on the Main Power On/Off switch on the right side of the  
front panel. It will beep once. This means you have power and your remote is ready to operate your  
electric fireplace.  
1. ON/OFF: Press this button to turn on the power.  
2. FLAME: Press this button to turn on the flame effect. Keep pressing down this button, the  
flame/log light will turn from bright to dim. Pressing this button again will turn off the flame.  
3. 750W Button: Press this button and the fireplace will work at 750W. Pressing again will switch it  
off.  
4. 1500W Button: Press this button and the fireplace will work at 1500W. Pressing again will switch  
it off.  
INSTRUCTIONS FOR POWER  
This heater is for use on 120 volts only. The cord has a plug as shown at (A) in the following figure.  
An adapter as shown at (C) is available for connecting three-blade grounding-type plugs to two-slot  
receptacles. The green grounding lug extending from the adapter must be connected to a  
permanent ground such as a properly grounded outlet box. The adapter should not be used if a  
three-slot grounded receptacle is available.  
WARNING: Before servicing this heater be sure to unplug heater from wall outlet. Do  
not only turn off heater from the main “ON/OFF” switch, be sure to unplug this heater  
-6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE INSTRUCTIONS  
WARNING: Disconnect power  
before attempting any  
maintenance or cleaning to  
reduce the risk of fire,  
electrical shock or personal  
injury.  
WARNING: Do not exceed  
40 Watts per light bulb.  
Use of a higher rated bulb  
may result in a fire  
causing property damage  
and personal injury.  
REPLACING LIGHT BULBS  
MAINTENANCE OF MOTORS  
There is one (1) 40W Type B-10 light bulb located  
under the logset bed. Remove the four (4) screws  
on the cover located on the back of the fireplace  
and then remove the rear cover of the unit.  
The motors used on both blower fan and flame  
simulator assembly are prelubricated for the  
extended warranty of the motor, no further  
lubrication is required. However, periodic  
cleaning/vacuuming of the fan/heater unit is  
recommended.  
CAUTION: The bulb in your unit  
can become extremely hot.  
CAUTION: Even though the glass is safety glass it  
may break if bumped, struck or dropped. Care must  
be taken when handling the glass.  
Allow at least 15 minutes  
between turning off the unit  
and removing the light bulb to  
avoid hot bulb coming in contact with the skin.  
GLASS INFORMATION  
Loosen and remove burnt out bulb, replace  
with 40W Type B-10 bulb.  
1. Under no circumstances should this product  
be operated with missing or broken glass.  
2. Do not strike or slam the glass.  
3. Do not use abrasive cleaners to clean the  
glass.  
CAUTION: Wait until the unit has completely  
cooled before attempting any cleaning.  
CLEANING  
To clean the unit, first turn off controls on unit  
and unplug unit from power source.  
To clean the glass door: remove dust with  
clean dry cloth or to remove finger prints and  
other marks clean glass with clean damp cloth.  
Do not use abrasive cleaners or spray liquids  
on glass door surfaces.  
Metal and metal painted parts should be  
cleaned with clean damp cloth only. Do not use  
abrasive cleaners or spray liquids on this  
surface  
-7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS:  
MODEL: EF5802R  
VOLTAGE: 120V/60HZ  
TOTAL AMPS: 11.3 AMPS  
TOTAL WATTS: 1500W  
HEATING RATINGS: 1400W (+5%, -10%)  
DIMENSIONS, INCHES (H X W X D)  
FIREPLACE: 40 X 11.4 X 41.3  
CARTON: 44.5 X 42.9 X 15  
-8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPLACEMENT PARTS LIST  
ITEM  
1, 2  
3
DESCRIPTION  
OEM  
Heater/Blower Assembly  
Heater Cabinet  
NDF-65NBR/60,61,27, 62, 68  
NDF-65NBR/10, 11  
NDF-65NBR/09A  
NDF-65NBR/37  
4
Remote Receiver Cover.  
Log Set  
5
6
Flame Screen  
NDF-65NBR/14  
7
Front Accessing Door  
Power Cord/Plug  
Touch pad  
NDF-65NBR/04  
8
NDF-65NBR/23  
9
NDF-65NBR/62A  
NDF-65NBR/43B  
NDF-65NBR/78  
10  
11  
12  
13  
14  
15  
16  
17  
PCB Board  
Remote Handset  
Bulb  
NDF-65NBR/52  
Bulb Socket  
NDF-65NBR/51  
Main Power Switch  
Thermostat Control Device  
Thermostat Knob  
Flame Reflector Assembly  
NDF-65NBR/28  
NDF-65NBR/31  
NDF-65NBR/32  
NDF-65NBR/40,41,45,46  
-9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cornelius Beverage Dispenser D45 User Manual
Crate Amplifiers Stereo Amplifier BFX100 User Manual
Dynaudio Speaker IP 24 User Manual
Edelbrock Automobile Accessories 262 400 User Manual
Fender Musical Toy Instrument Brown Derby User Manual
First Alert Home Security System FA1600C CA CB User Manual
Fisher Paykel Garbage Disposal GD50S1 User Manual
Fisher Price Motorized Toy Car 74526 User Manual
Frigidaire Convection Oven FGB24T3EB User Manual
Genesis Advanced Technologies Cordless Saw GJS450 User Manual