HARDWARE
HOUSE®
ELECTRIC STAPLEGUN
Model HH34392
OPERATING
INSTRUCTIONS
®
Download from Www.Somanuals.com. All Manuals Search And Download.
During Operation of Tool
1. Keep all parts of body away from staple exit on tool.
2. Never point tool at anyone.
3. Keep children, animals, and bystanders away from tool and extension cord
at all times. Only tool user should be in work area.
4. Stay alert. Use common sense while operating tool.
5. Keep trigger lock in the OFF position and finger off trigger until ready to
drive staple.
6. Keep work area clean. Cluttered work areas invite injuries.
7. Secure work before using tool. Use both hands to operate tool.
8. Do not touch any metal part of tool when stapling into areas where electri-
cal wiring may be present. These areas include walls, floors, and ceilings.
If staple contacts electrical wire, electric shock may occur.
9. Avoid body contact with grounded objects such as pipes, fences, and metal
posts.
10. Do not force tool. Use tool at rate for which it was designed.
11. Do not overreach. Keep proper footing and balance at all times.
12. Carry tool from one place to another
• with tool unplugged
• with trigger lock in the OFF position
• with finger off the trigger
General
1. Inspect tool before and after each use. Check for any damage that may
affect operator safety or operation of tool. Check for broken or damaged
parts. Do not use tool if damage affects safety or operation.
2. Maintain tool with care.
• Never fire tool when empty of staples. This may damage tool.
• Keep tool clean.
• Keep handles dry, clean, and free of oil and grease.
• Inspect power cord often.
• Never carry tool by power cord.
• Never yank power cord to unplug it.
• Keep power cord away from heat, oil, and sharp edges.
• Inspect extension cords often and replace if damaged.
• Never oil or grease any part of tool.
3. Always store tool
• with staples removed from chamber
• out of children’s reach
• in a high or locked place that is dry
Keep these operating instructions for reference. It is your guide to safe and
proper operation of this tool.
112787
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Identification
Head
Hand Grip
On/Off Trigger Lock
Trigger
Power
Cord
Staple Chamber
Cover (underneath)
Staple Exit
Product Features
The Hardware House® Electric StapleGun is a multi-purpose tool. This tool is
designed for home and workshop. It performs basic fastening jobs from
installing insulation, porch screening, and ceiling tiles to repairing upholstery.
Trigger This tool has an easy squeeze trigger. The trigger is located under-
neath the hand grip. Each squeeze of the trigger fires one staple. Make sure
your finger is not on the trigger when connecting or loading the tool.
ON/OFF Trigger LockThis tool is equipped with a sliding ON/OFF trigger lock.
The trigger lock is located at the front of the hand grip, just above the trigger.
This safety feature helps prevent accidental firing. Make sure the trigger lock
readsOFFwhenplugginginorloadingthetool. Also, makesurethetriggerlock
reads OFF when tool is not in use. To release, slide the trigger lock to read ON.
112787
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Extension Cords
CAUTION: Use only extension cords marked for outdoor use.
Be sure to use the right size extension cord. If cord size is wrong, tool may be
damaged. Tool performance may also be affected.
Extension Cord Size Requirement
1 to 25 feet, use 16 AWG rated cord
26 to 50 feet, use 14 AWG rated cord
Inspect extension cords often and replace if damaged.
Loading Tool
WARNING: Never load tool while it is plugged in. Accidental
discharge may occur. Before loading, move trigger lock to the OFF
position and unplug tool.
1. Move trigger lock to the OFF
Trigger Lock In
position (see Figure 1) and
Off Position
unplug tool.
2. Turn tool upside down.
3. Press in latch lock and slide
staple chamber cover back
until fully open (see Figures
2 and 3).
Figure 1
Latch
Lock
Staple
Chamber
Cover
Figure 2
Figure 3
Continued
Download from Www.Somanuals.com. All Manuals Search And Download.
112787
5
4. Drop staples in channel (see Figure 4).
Note: We recommend that you only use Hardware House® heavy-duty,
narrow-crown staples in this tool. Wrong staples can cause jamming.
5. Slide staple chamber cover closed. Make sure cover locks into place.
Staples
Figure 4
Operating Tool
WARNING: Keep trigger lock in the OFF position and finger off
trigger until ready to drive staple.
WARNING: Keep all body parts away from staple exit on tool.
1. Make sure trigger lock is in the
OFF position.
Trigger Lock
2. Plug tool into a 120 Volt/60 Hertz
outlet.
3. Grip tool firmly.
4. Slide trigger lock to the ON po-
sition.
Figure 5
112787
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Squeeze trigger to fire.
6. IMPORTANT: Do not fire this tool
when empty of staples. This may
damage tool.
Note: In difficult fastening jobs, press
down on head of tool with palm of free
hand (see Figure 6). This will improve
staple driving.
Figure 6
Maintenance
WARNING:Donotalterthistoolinanyway. Onlyuseaccessories
designed for this tool.
WARNING:Neverperformstepslistedbelowwhiletoolisplugged
in. Accidental discharge may occur. Move trigger lock to the OFF
position and unplug tool.
Tool Jam
1. If tool jams, move trigger lock to the OFF position and unplug tool.
2. Turn tool upside down.
3. Press in latch lock and slide staple chamber cover back until fully open.
4. Remove unused staples.
5. Remove staple(s) causing jam.
6. Reload tool (see Loading Tool, page 5).
Cleaning
Use a clean cloth to remove dirt from tool. Do not use solvents when cleaning
plastic parts.
Lubrication
Do not oil or grease any part of tool. This may damage tool.
IMPORTANT: Do not attempt to repair tool or replace broken parts.
WARNING: This product contains chemicals known to the State
of California to cause cancer or birth defects, or other reproductive
harm.
112787
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Staples
WerecommendthatyouonlyuseHardwareHouse® heavy-duty,narrow-crown
staples. These staples are available in five lengths. Hardware House® heavy-
duty, narrow-crownstaplescanbefoundwhereyoupurchasedyourstaplegun.
STAPLES
Staple Brand
Hardware
House®
Model No
Staple
Size
Hardware
House®
PowerFast®
Arrow®
PowerShot®
Stanley®
1/4"
5/16"
3/8"
HH36504A
HH36505A
HH36506A
HH36508A
HH36510A
36504A
36505A
36506A
36508A
36510A
504
505
506
508
509
97-010
97-011
97-012
97-013
97-014
TRA704
TRA705
TRA706
TRA708
TRA709
HH34392
Use:
1/2"
9/16"
Arrow is a registered trademark of Arrow Fastener Company. Stanley is a registered trademark of Stanley Corporation.
PowerShot is a registered trademark of PowerShot Tool Company. PowerFast® is a registered trademark of DESA IP, LLC.
Hardware House®
P.O. Box 2607
Birmingham, AL 35202
For Technical Assistance Call
Customer Service Department
1-800-822-0056
112787-01
Rev. A
12/03
Printed in Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
|