Curtis Flat Panel Television LCD3202A User Manual

Model: LCD3202A  
Please read this User Manual carefully to ensure the proper use of this product and  
keep this manual for future reference  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY AND WARNINGS  
IMPORTANT SAFETY INSTRUCTION  
1.Read these safety instructions.  
2.Keep these safety instructions.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN!  
3.Heed all warnings.  
4.Follow all safety instructions.  
CAUTION  
5.Do not use this apparatus near water.  
6.Clean only with dry cloth.  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO  
NOT REMOVE COVER (OR BACK).NO USER  
SERVICEABLE PARTS INSIDE. REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL.  
7.Do not block any ventilation openings. Install in  
accordance with the manufacturers instructions.  
8.Do not install near any heat sources such as radiators ,  
stoves, or other apparatus (including amplifiers)that  
produce heat.  
The symbol indicates that dangerous voltages  
constituting a risk of electric shock are present  
within this unit.  
9.Protect the power cord from being walked on or  
pinched particularly at power outlets, and the point  
where they exit from the apparatus.  
The symbol indicates that there are important  
operating and maintenance instructions in the  
literature accompanying this unit.  
10.Only use attachments/accessories specified by the  
manufacturer.  
WARNING:  
11.Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
To prevent fire or shock hazard, do not expose this  
appliance to rain or moisture.  
12.Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as the power-supply cord  
or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture , does not operate normally,  
or has been dropped.  
13.Apparatus must not be exposed to dripping or  
splashing and no objects filled with liquids, such as  
vases, should be placed on the apparatus.  
-2-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY AND WARNINGS  
High voltages are used in the operation of this television  
receiver. Do not remove the cabinet back from your set.  
Refer servicing to qualified service personnel.  
Never stand on, lean on, or suddenly push the television or  
its stand. You should pay special attention to children.  
Serious injury may result if it falls.  
To prevent fire or electrical shock hazard, do not expose  
the television receiver to rain or moisture.  
Do not place your television on an unstable cart, stand,  
shelf or table. Serious injury to an individual , and damage  
to the television, may result if it falls.  
Do not drop or push objects into the television cabinet  
slots or openings. Never spill any kind of liquid on the  
television receiver.  
When the television receiver is not used for an  
extended period of time, it is advisable to disconnect  
the AC power cord from the AC outlet.  
Do not block the ventilation holes in the back cover.  
Adequate ventilation is essential to prevent failure of  
electrical components.  
Avoid exposing the television receiver to direct sunlight  
and other sources of heat. Do not stand the television  
receiver directly on other products which give off heat,  
e.g. video cassette players and audio amplifiers. Do not  
place naked flame sources, such as lighted candles on  
the television.  
D
im:515*320mm(  
Do not trap the power supply cord under the television  
receiver.  
If the television is to be built into a compartment or similar  
enclosure, the minimum distances must be maintained. Heat  
build-up can reduce the service life of your television, and  
can also be dangerous.  
-3-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY AND WARNINGS  
television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following  
measures:  
Thank you very much for purchasing this TV. To enjoy  
your product from the very beginning, read this manual  
carefully and keep it handy for easy reference.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected .  
-Consult the dealer or an experienced radio TV technician  
for help.  
INSTALLATION  
Locate the TV in the room where light does not strike  
the screen directly.  
Shield cables must be used with this unit to ensure  
compliance with the Class B FCC limits.  
Total darkness or a reflection on the picture screen can  
cause eyestrain. Soft and indirect lighting is recommended  
for comfortable viewing.  
Allow enough space between the TV and the wall to  
permit ventilation.  
Avoid extremely warm locations to prevent possible  
damage to the cabinet or premature component failure.  
This TV can be connected to AC 100-240 Volts. 50/60 Hz.  
Never connect to a DC supply or any other power supply.  
Do not cover the ventilation openings when using the TV.  
CAUTION  
Never tamper with any components inside the TV, or any  
other adjustment controls not mentioned in this manual.  
All LCD-TVs are high voltage instruments. When you  
clean up dust or water drops on the LCD PANEL or  
CABINET, the power cord should be pulled out from the  
receptacle, then wipe the TV with a dry soft cloth. During  
thunder and lighting, unplug the power cord and antenna  
cord to prevent damage to your TV. All repairs to this TV  
should only be performed by qualified TV service personnel.  
Earthing connection--- The apparatus shall be connected  
to MAINS socket outlet with a protective earthing connection  
MAINS plug or appliance coupler of the apparatus is used  
as disconnect device, it should remains readily operable  
Warning: Change or modifications to this unit not expressly  
by the part responsible for compliance could void the user's  
authority to operate the Equipment.  
NOTE:  
This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15  
of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or  
-4-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Accessories  
Main features  
Used as Television, display terminal,PC display  
High luminance,wide viewing angle  
AC Power Cord.........................  
1
1
1
2
Infrared Remote Control...........  
User s Manual ........................  
3
4
BTSC  
ATSC digital signals and NTSC analog signals TV.  
Battery(AAA)..........................  
Main parameter  
Viewing Picture Size(diagonal)  
Resolution:  
32inch  
1366x768  
16:9  
Aspect Ratio:  
TV System:  
ATSC Digital system and NTSC Analog system  
NTSC/PAL/SECAM  
Video Signal System:  
Receiving Channel:  
Cable :1-135/ Air: 2-69(ATV&DTV)  
Power consumption:  
170W  
Input Power Voltage:  
AC 100V-240V 50/60Hz  
2x8W  
Audio Output Power(THD 7%):  
Rear High-Definition Multimedia Interface(HDMI) Input  
Side HDMI Input  
x 2  
x 1  
x 1  
x 1  
x 1  
x 1  
x 1  
x 1  
x 1  
x 3  
x 1  
x 1  
x 1  
Rear S-Video Input  
YCb(Pb)Cr(Pr) Input  
Side S-Video Input  
Rear Analog Audio Output  
Rear Coaxial SPDIF Output  
Analog RGB(VGA) Input  
Rear Composite Video Input  
Rear Audio Input  
Side Composite Video Input  
Side HEAD PHONE Output  
Rear Composite Video Output  
Horizontal definition(TV line)  
Composite Video Input >=350  
Video Input  
>=400  
>=400  
YCb(Pb)Cr(Pr)  
-5-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Front panel  
KEYBOARD  
1
SOURCE Display the  
SOURCE  
input source menu.  
MENU Display main  
MENU.  
2
MENU  
CH+  
3
CH+/CH-:In TV mode  
press CH+ or CH- to  
change the channel up and  
down.In MENU mode, press  
CH+ or CH- to select  
items .In standby mode,  
press CH+ or CH- to  
turn on the TV.  
3
4
CH-  
VOL+  
VOL-  
2
1
4
VOL+/VOL-:Adjust  
sound level.In MENU mode,  
press VOL+ or VOL-  
to adjust the item that you  
selected.  
30 30  
1
4
7
2
5
8
3
6
9
1: Remote control sensor.  
2: Indicator LED: GREEN  
RED  
SIDE PANEL(LEFT)  
0
POWER ON.  
STANDBY.  
+
+
V
O
L
CH  
_
_
All the terminals are(from up to down):  
3: Key board  
HEAD PHONE, S-VIDEO2, AV2, HDMI3.  
HEADPHONE  
4: Power: Press this button to turn the unit  
ON from STANDBY mode.  
Press it again to turn the set back to  
STANDBY.  
NOTE:  
AV2 and S-VIDEO2 share the audio input  
channel. When HDMI3 port get DVI signal,  
the AV2 Audio channel will change to  
receive the audio from HDMI3 port.  
S-VIDEO2  
VIDEO  
AV2  
L
R
REAR AV Connection  
10 11  
12  
13  
1
2
3
4
5
6
7
8
9
14  
1. ANT  
6. YPbPr AUDIO INPUT  
7. PC AUDIO INPUT  
8. YPbPr INPUT  
9. AV1 INPUT  
10. S-VIDEO1 INPUT  
11. VGA INPUT  
2. AUDIO OUTPUT  
3. SPDIF OUTPUT  
4. VIDEO OUTPUT  
5. AV1/S-VIDEO1 AUDIO INPUT  
Note:  
1.AV1 and S-VIDEO1 share one audio channel.  
12. HDMI2 INPUT  
13. HDMI1 INPUT  
14. AC POWER INPUT  
2. When HDMI1 port get DVI signal, the PC Audio channel will change to receive the audio from HDMI1 port  
3. When HDMI2 port get DVI signal, the YPbPr Audio channel will change to receive the audio from HDMI2 port.  
4.AV OUTPUT :  
When the source are AV1,AV2(side) S-VIDEO1,S-VIDEO2(side),ATV,the AV OUTPUT Channel reproduce the input  
signals accordingly  
-6-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
PC  
STEPS:  
Be sure both the TV and computer are set to Power off.  
1.Connect VGA and audio cable.  
2.Connect the power cord.  
3.Power on the TV, switch to VGA mode.  
4.Power on the VGA.  
This sequence is very important.  
2
1
PRESET MODE  
V.Freq.(Hz)  
H.Freq.(KHz)  
RESOLUTION  
1
2
3
4
720*400  
640*480  
70  
60  
31.47  
31.47  
640*480  
640*480  
800*600  
800*600  
72  
75  
56  
60  
37.86  
37.50  
5
6
35.156  
37.88  
7
8
9
800*600  
800*600  
1024*768  
72  
75  
60  
48.08  
46.88  
48.36  
10  
11  
1024*768  
1024*768  
70  
75  
56.48  
60.02  
12  
13  
1280*1024  
1280*1024  
60  
75  
63.98  
80.00  
-7-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
ANTENNA  
Note:  
Aerial connections:IEC(female).  
Input impendance:75 unbalanced.  
-8-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
AV EQUIPMENT  
This TV provides two groups of AV ,two S-Video,one group of YPbPr for convenient connection  
to VCR,DVD or other video equipment,three group of HDMI for HD signal input Please refer to  
the owner s manual of the equipment to be connected as well.  
You can use the input terminals on TV set rear as follows.  
VIDEO EQUIPMENT with YPbPr  
To au dio  
outputs  
with SPDIF Input  
terminal  
with S-video  
Terminal  
From Coaxial SPDIF  
output  
R
G
B
Pr  
Y
G
B
R
W
R
To s-video  
output  
VIDEO EQUIPMENT  
VIDEO RECORDER  
Pb  
Y
W
R
Black (s-video)  
White(audol L)  
Red(audio R)  
G
Y
B
W
R
W
R
R
2
1
W
R
Y
W
R
Y
With VIDEO Input Terminal  
Y
TO VIDEO  
Iutput  
W
R
To audio Input  
HDMI  
To audio  
Output  
With VIDEO  
terminal  
HDMI cable not included  
To video  
output  
VIDEO EQUIPMENT  
HEADPHONE  
S-VIDEO2  
VIDEO  
AV2  
L
R
HDMI  
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game  
or stereo system, etc.....  
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i,1080p.  
NOTE:  
AV2 and S-VIDEO2 share the audio input channel.  
When HDMI3 port get DVI signal, the AV2 Audio channel will change to receive the audio  
from HDMI3 port  
-9-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
1:POWER  
To set the TV standby or on.  
2:NUMBER KEY:  
POWER  
MUTE  
For direct access to program.  
3:MENU  
To display TV menu or to return to the previous menu.  
4: CURSOR  
To move within the menu.  
5: EXIT  
Used to exit menu.  
11  
12  
1
2
RECALL  
1
4
2
5
8
3
6
9
7
0
6: VOL+/-  
To adjust sound level.  
7: P.M  
To switch picture mode.  
8: MTS/SAP  
MENU  
SOURCE  
13  
14  
3
4
ENTER  
Switch the sound stereo, SAP and mono.  
9: SLEEP  
Set time to turn off the TV.  
10:V-CHIP  
Setting the V-CHIP level control.  
11:MUTE  
To disable or enable the sound.  
12: RECALL  
15  
16  
5
6
EXIT  
+
TV DISPLAY  
+
S.M  
P.M  
17  
VOL  
_
CH  
_
To access the previously viewed program.  
13: SOURCE  
To display or exit TV input source menu.  
14: ENTER  
Confirms selection.  
15: TV DISPLAY  
Displays/removes the program Information  
16: S.M  
To switch sound mode.  
17: CH+/CH-  
7
8
MTS/SAP  
ASPECT  
18  
SLEEP  
V-CHIP  
FAV  
CC  
9
19  
22  
10  
CH LIST  
EPG  
20  
HDMI  
TV  
AV  
SVIDEO  
21  
23  
24  
29  
25  
26  
27  
28  
PAGE UP PAGE DOWN  
YPbPr  
VGA  
To access the next or previous Program.  
18: ASPECT  
To change picture aspect .  
19: CC  
EPG  
30  
Enable or disable the CC function.  
20:CH LIST:  
Used to display the channel list  
21:FAV:  
Insert Batteries Into the Remote Control  
Used to access your favourite channels in digital TV mode.  
22:EPG:  
1
2
3
Display all the information of DTV programs.  
23.HDMI:  
Hot key directly go to HDMI source.  
24:SVIDEO:  
Hot key directly go to SVIDEO source.  
25:TV:  
1. Remove the battery cover.  
2. Inserting the 2 AAA 1.5V batteries making sure the  
polarity (+ or -) of the batteries matches the polarity  
marks inside the unit.  
3. Mount the battery cover.  
Replace with new batteries when the TV set begins  
to show the following symptoms:  
Hot key directly go to TV source.  
26:AV:  
Hot key directly go to AV source.  
27: YPbPr:  
Hot key directly go to YPbPr source.  
28: VGA:  
Hot key directly go to VGA source.  
29: PAGE DOWN/PAGE UP  
In EPG mode, use this key to page up/down the EPG  
information.  
Operation is unsteady or erratic. Sometimes the TV  
set does not function with Remote Control Unit.  
Remark:  
1) Alkaline Battery Recommended.  
2) Remove batteries when they are exhausted or if the  
remote control is not to be used for long time.  
30.COLOR KEYS: Reserved keys  
-10-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
3.TIMER MENU  
1. PICTURE MENU  
The third item of the MENU is TIMER MENU.  
You can adjust time here.  
The first item of the MENU is PICTURE MENU.  
You can adjust picture effect here, such as contrast,  
brightness, etc.  
Press  
to exit.  
to select, press  
to adjust, press MENU  
Press  
to exit.  
to select, press  
to adjust, press MENU  
Audio  
Timer  
Setup  
Channel  
Picture  
P.G  
Picture  
P.G  
Channel  
Audio  
Setup  
Timer  
Standard  
Picture mode  
Sleep timer  
Time zone  
Off  
Contrast  
Brightness  
Color  
50  
50  
50  
0
Pacific  
Off  
Daylight Saving Time  
Clock  
1999/12/31 04:03PM  
Tint  
Sharpness  
Color Temp.  
50  
Normal  
Select  
Adjust  
Menu Exit  
Select  
Adjust  
Menu Exit  
Note:  
1).Sleep Timer: adjust this item , you can set the  
sleep timer .  
Note:  
If you want to adjust contrast, brightness, color,  
and sharpness , the picture mode must return to  
personal status.  
The item of Time zone, the item of Daylight Saving  
Time and the item of Clock are available in ATSC  
program  
2.AUDIO menu  
The second item of the MENU is AUDIO MENU.  
You can adjust sound here.  
4. SETUP MENU  
Press  
to exit.  
to select, press  
to adjust, press MENU  
The forth item of the MENU is SETUP MENU.  
You can setup system here.  
Press  
to exit.  
to select, press  
to adjust, press MENU  
Picture  
Audio  
P.G  
Timer  
Setup  
Channel  
Standard  
Sound mode  
Bass  
50  
50  
50  
Treble  
Balance  
Surround  
AVC  
Off  
Off  
Picture  
Audio  
Channel  
Timer  
Setup  
P.G  
SPDIF Type  
PCM  
Audio language  
English  
Menu language  
Transparency  
English  
On  
Aspect  
Select  
Adjust  
Menu Exit  
16:9  
Noise Reduction  
Advanced  
Weak  
Closed caption  
Note:  
The item of Audio language is available in ATSC  
program.  
XVS  
Off  
Restore Default  
Select  
Adjust  
Menu Exit  
Note:  
Restore Default: Reset all the settings to default  
value.  
-11-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
1). Advanced: In PC Mode is available.  
5. P.G MENU  
Press button to select Advanced item , Press  
button, the screen will display as follow:  
The fifth item of the MENU is P.G MENU.  
You can setup Parental Control here.  
Press  
to exit.  
to select, press  
to adjust, press MENU  
Parent Control: input the password, it will go into  
Parental Control menu. Factory default password  
is 6666.  
Picture  
H-pos  
Audio  
Channel  
Timer  
Setup  
P.G  
50  
50  
50  
50  
V-pos  
Clock  
Phase  
Auto  
Picture  
Audio  
Setup  
Channel  
Timer  
P.G  
Enter password  
----  
Select  
Adjust  
Menu Exit  
(1).H-Pos:Adjust the horizontal position of the screen.  
(2).V-Pos:Adjust the vertical position of the screen.  
(3).Clock: Fine tune the screen width.  
Select  
Adjust  
Menu Exit  
(4).Phase: Fine tune the phase of the screen. Usually  
don`t adjust this item.  
(5).Auto: Auto adjust to fit the screen.  
5.1 .Input the correct password ,the screen will display  
as follow:  
2). Closed Caption: switch close caption mode.  
Press  
Press  
button to select Closed Caption item,  
button, the screen will display as follow:  
Picture  
Audio  
Setup  
Channel  
Timer  
P.G  
Change password  
P.G switch  
US  
On  
Canada  
Picture  
Audio  
P.G  
Off  
Channel  
Timer  
Setup  
RRT setting  
Reset RRT  
CC Mode  
Basic Selection  
CC4  
Advanced Selection  
Service 3  
Select  
Adjust  
Menu Exit  
Option  
1). Change Password: Press button, the screen will  
display as follow:  
Select  
Adjust  
Menu Exit  
(1):Advanced Selection: only ATSC program is available.  
(2):Option:Used to edit CC font.  
Picture  
Audio  
Setup  
Channel  
Timer  
P.G  
New password  
----  
----  
Press  
button, the screen will display as follow:  
Confirm password  
Picture  
Audio  
Channel  
Timer  
Setup  
P.G  
Mode  
Custom  
Font style  
Font size  
Default  
Default  
Default  
Select  
Adjust  
Menu Exit  
Font Edge style  
Font Edge color  
FG color  
Default  
Default  
Default  
Default  
Default  
1).New Password: Input the new password  
BG color  
FG opacity  
BG opacity  
2).Confirm Password: Input the new password again  
Select  
Adjust  
Menu Exit  
NOTE: Only ATSC program is available.  
-12-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
2).MPAA:switch the movie-rating control level: N/A,  
G, PG, PG-13,R,NC-17,X.  
5.2 P.G switch:  
When the Parental Control switch is ON, the below  
options can be adjusted.  
Rating  
Description  
5.3 US: Press  
follow:  
button, the screen will display as  
G
General audiences, All Ages admitted  
Parental Guidance suggested. Some material may not be  
Suitable for children.  
PG  
PG-13  
R
Parents strongly cautioned. Some material .may be  
Inappropriate for children under 13.  
Setup  
Picture  
Audio  
Timer  
P.G  
Channel  
Age  
Restrict. Under 17 requires accompanying parent or adult  
guardian(age varies in some jurisdictions)  
TV  
X
MPAA  
NC-17  
X
No one 17 and under admitted.  
X is an order rating that is unified with NC-17 but may be  
encoded in the data of order movies.  
Select  
Adjust  
Menu Exit  
5.4 Canada: Press  
displayed as follow:  
button, the screen will be  
1):TV: Press button, the screen will display as  
follow:  
Picture  
Audio  
Setup  
Channel  
Timer  
P.G  
14+  
Canada English  
Canada French  
E
Picture  
Audio  
Setup  
S
Channel  
Timer  
P.G  
TV rating  
FV  
ALL  
V
L
D
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
Select  
Adjust  
Menu Exit  
Block  
Press ENTER to lock or unlock  
1): Canada English: switch the english rating control  
level:E,C,C8+,G,PG,14+,18+.  
Select  
Adjust  
Menu Exit  
Description  
Rating  
Content  
FV  
(Fantasy (Violence) (Sexual  
V
S
L
(Adult  
D
(Sexually  
E
C
Exempt: Includes news, sports, documents and other information  
programming: talk shows, music videos, and variety programming.  
Rating Content  
violence)  
situation) language) suggestive  
dialog)  
Children: Intended for younger children under the age of 8 years.  
Pays careful attention to themes that could threaten their sense of  
securityand well-being.  
TV-Y (All  
children)  
TV-Y7(Direct to  
order children)  
C8+ Children over 8 years old: Contains no portrayal of violence as the  
preferred, acceptable, or only way to resolve conflict; nor encourage  
children to imitate dangerous acts which they may see on the screen .  
X
Suggested  
age  
TV-G(General  
audience)  
G
General: Considered acceptable for all age groups, Appropriate  
viewing for the entire family, contains very little violence, physical,  
verbal or emotional.  
TV-PG(Parental  
Guidance  
suggested)  
Age  
X
X
X
X
X
X
X
X
X
X
X
TV-14(Parents  
strongly  
cautioned)  
PG Parental Guidance: Intended for a general audience, but may not be  
suitable for younger children (under the age of 8) because it could  
contain controversial themes or issues.  
TV-MA(Mature  
audience only)  
14+ Over 14 Years: Could contain themes where violence is one of the  
dominant elements of the storyline But it must be integral to the  
devel opment of plot or character. Language usage could be profane  
and nudity , present within the context of theme.  
And use ENTER key to switch lock/ unlock Parental  
Control feature.  
18+ Adults: Intended for viewers 18 years and older and might contain  
depictions of violence, which while related to the development of  
plot, character or themes, are intended for adult viewing. Could  
contain graphic language and portrayals of secretary and nudity.  
-13-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
1). Air/Cable: select air TV signal or cable TV signal.  
2). Auto Scan: If it's the first time using the TV, it  
should scan all the TV channels first,  
2).Canada French: switch the French-rating control  
level: E, G,8ANS+,13 ANS+,16ANS+,18ANS+.  
press the  
menu :  
button to confirm, you will see below  
Rating  
Description  
E
Exempt programming  
G
General :All ages and children, contains minimal direct violence,  
but may be integrated into the plot in a humorous or unrealistic  
manner .  
Picture  
Audio  
Setup  
P.G  
Channel  
Timer  
8ans+ General but inadvisable for young children :May be viewed by a  
wide public audience, but could contain scenes disturbing to  
children under 8 who cannot distinguish between imaginary and  
real situations. Recommended for viewing with parent.  
Start to scan  
Age  
13ans+ Over 13 years: Could contain scenes of frequent violent scenes  
and in tense violence.  
16ans+ Over 16 years: Could contain frequent violent scenes and violence.  
18ans+ Over 18 years: Only for adult viewing. Could contain frequent  
violent scenes and extreme violence.  
Select  
Adjust  
Menu Exit  
5.5 RRT Setting: in ATSC digital TV mode, it could be  
adjusted  
A: Start to Scan: press the  
will see below menu which indicates auto search is  
in process.  
button to confirm, you  
5.6 Reset RRT: Press  
displayed as follow:  
button, the screen will be  
Picture  
Audio  
Setup  
Channel  
Timer  
P.G  
Audio  
Picture  
Setup  
P.G  
Channel  
Timer  
Are you sure?  
NO  
YES  
RF CH:  
FOUND:  
4
0
Select  
Adjust  
Menu Exit  
Select  
Adjust  
Menu Exit  
6. Channel MENU  
3). Favorite: Press  
favorite channel .  
4). Show/Hide: Press  
currently channel.  
button to choose/delete the  
button to display or hide  
The sixth item of the MENU is CHANNEL MENU.  
You can adjust digital and analoge TV channel here .  
Press  
to move, press  
to adjust.  
5). Channel NO. :Display the currently channel number.  
button to edit currently  
6). Channel Lable: Press  
channel name.  
Picture  
Audio  
Timer  
Setup  
P.G  
Channel  
7). DTV Signal: Display DTV signal intension. It can't be  
selected and adjusted.  
Cable  
Air/cable  
Auto Scan  
Favorite  
Show/Hide  
2-1  
Channel NO.  
Channel Lable.  
DTV signal  
:
Select  
Adjust  
Menu Exit  
-14-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble shooting  
Trouble phenomenon Symptom  
Picture  
Inspection Check  
Audio  
antenna position, direction  
or connection  
Snow  
Ghost  
Noise  
antenna position, direction  
or connection  
Normal audio  
electronic equipment,car/  
motorcycle,fluorescent light  
Interference  
Noise  
Volume(check if mute is  
activated or if the audio system  
connections are not correct)  
Normal Picture  
Mute  
Power cord is not inserted  
Power switch is not opened  
Contrast and brightness/volume  
setup  
Press standby key on the remote  
control for inspecting  
No picture  
No colour  
Mute  
Normal audio  
Colour control  
retune channel  
Picture  
breaking up  
Normal audio  
or weak  
No colour  
TVsystem  
Noise  
The LCDTV panel is built with very high precision technology giving you fine picture details  
in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed  
point of red, green, blue, black or white. Please note this does not affect the performance of  
the product.  
-15-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cobra Electronics GPS Receiver 4400 User Manual
Compaq Network Card WL100 User Manual
Compaq Personal Computer 1650 User Manual
Corega Network Card WLUSB2GO User Manual
Crown Audio Stereo Amplifier DSi 1000 User Manual
Cuisinart Griddle CVR 1000 User Manual
Cuno Water System SQC Series User Manual
Cypress Computer Hardware CY7C1223H User Manual
Dukane Projector 8948 User Manual
GE Monogram Refrigerator Side by Side Stainless Steel Free Standing Refrigerators User Manual