DVD Home Theater System
Operating Instruction Manual
DVD6041
DVD Home Theater System
Built-in Dolby Digital decoding for maximum home entertainment enjoyment
Unique laser-head over-current protection system doubles service life
Special DVD deck features fully dust proof and anti shock design as well as augmented error
correction and better stability
Fully functional DVD operating system offers many favorite functions and user-friendly
operation
Integrated DVD and built-in 6-channel Hi-Fi amplifier
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT--
TECHNICAL
SPECIFICATIONS
SAFETY INFORMATION
CAUTION: Is it important that you read and follow all
of the instructions in this booklet and any marked on
the unit itself. Retain this booklet for future reference.
Accessories--- Never place this product on an un-
stable platform, stand, cart, wall mount, shelf, or
table. The product may fall, causing serious personal
injury to persons and pets, as well as seriously
damaging the product. Use only with a stable platform,
stand, cart, wall mount, shelf, or table that has been
recommended by sold with the product . Any
mounting of the product should follow the
manufacturer's instructions, and use a mounting
accessory recommended by the manufacturer.
This unit while positioned on some type of cart must
be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and
cart combination to overturn.
Power Lines---An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
DVD Player
TV System
Compatible Discs
Frequency Response:
Main Speakers
Surround Speakers
Center Speaker
Subwoofer
NTSC/PAL
DVD, CD, MP3,
CD-R, CD-RW
Greater Than 500 lines
65dB
200Hz-20kHz +/- 3dB
200Hz-20kHz +/- 3dB
200Hz-20kHz +/- 3dB
20Hz-200Hz +/- 3dB
Resolution Ratio
Video S/N Ratio
Frequency Response
fs (96KHz/24bit)
4Hz - 44KHz:+/-2dB
95dB
S/N Ratio
Input Sensitivity
Channel Resolution
> 76dB
350mv, 47k
> 30dB (Normal)
Power Sources---This productshould be operated
only from thetype of powersource indicated on the
marking label. Ifyou are notsure of thetype of power
supply to yourhome, consult yourproduct dealer or
local power company. For products intended to
operate from batterypower or othersources, refer to
the operating instructions. This DVD home theater
operates on AC 120V~60Hz. Do not turn off unit
immediately after turningon; wait atleast 10 seconds.
Replacement Parts--- If replacement parts are
required, be sure the service technician has used
approved replacement parts or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
Safety Check---Upon completion of any service
or repairs tothis product, askthe service technician
to perform safety checks to determine that the
product is inproper operating condition.
Servicing--- Do not attempt to servicethis product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
TV System---This unit is compatible with television
sets featuring either the NTSC or PALcolor system.
Ventilation---Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation and protection from overheating. These
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in install-
ation such as a bookcase or rack unless proper
ventilation is provided. Never place this product near
Audio S/N Ratio
Degree of Distortion
D/A Converter
Video Out
<0.01%
192KHz/24bit
1Vp-p
Y: 1Vp-p(75 )
Remote Control
Transmitter
Signal Range
Power Source
Infrared Ray
Approximately 15'
2 "AAA" Batteries
S-Video Out
C: 0.3Vp-p(75 );
+0
Audio Out
2.0V/
5.1 Channel,
V
-1
General
Power Supply
Consumed Power
Attachments---Use only approved attachment as
they may cause hazards.
AC 120V~6 0Hz
90W
Digital Audio Output
Connections
Coaxial
YUV, CVBS
S-Video, 2 Channel
Output
Cleaning--- Always unplug this unit from the wall
electrical outlet before cleaning. Do not use liquid or
aerosol cleaners; use a damp cloth for cleaning.
Lightning--- For added product protection during
a lightning storm or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and/or disconnect the antenna or cable
system. This will prevent damage to the product due
to lightning and power-line surges.
Object and Liquid Entry--- Never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquidof any kind on orinto the product.
Outdoor Antenna Grounding--- If an outside
antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so
as to provide protection again stvoltage surges and
built-up static charges.
Overloading---Do not overload wall outlets, exten-
sion cords, or integral convenience receptacles, as
this may result in a fire or electric shock.
Power - Cord Protection - Power - supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they
exit from the product.
Because its products are subject to continuous
improvement, We reserves the right to modify
product design and/or specifications without
notice and without incurring any obligations.
FM Tuner
Tuning Range
87.5-108MHz
S/N Ratio
Monophonic
Stereo
>46dB
>46dB
>50dB (DIN)
2
27
Selectance
THD
Monophonic
Stereo
Frequency Response
Stereo Resolution
50dB
2%
3%
30Hz-10kHz +/- 1dB
35dB (1kHz)
30dB (100Hz-10kHz)
AM Tuner
Tuning Range
S/N Ratio
THD
a
heat source, such as heat registers, stoves,
530-1710KHz
35dB
3%
radiators, or any other product that produces heat.
Water and Moisture---Do not usethis product near
sources of water and moisture, such as bath tub, wash
bowl, kitchen sink, or wash machine; in a wet, damp
basement; or near a swimming pool or similar
locations. If moisture condensation occurs, remove
any disc, connect the unit's power cord to a wall outlet,
turn the unit on, and leave it on for two to three hours.
By then, the unit will have warmed up and evaporated
any moisture.
Amplifier
Output Power:
Main Speakers
Surround Speakers
Center Speaker
Subwoofer
10W+10W (6 )
10W+10W (6 )
10W (6 )
20W (8 )
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
TROUBLE SHOOTING
JPEG FILES
JPEG adoptting the most efficient compression is
widely used as picture storage type flattened and
stored format.
Precaution ................................................ 1
Safety Information .................................... .2
Table of Contents .......................................3
System Setup............................................19
Language Setup. .................................................... 19
Video Setup ............................................................21
Audio Setup........................................................... 22
More Audio Setup....................................................23
Rating Setup...........................................................24
This handy trouble-shooting your guide is
provided to save your time in case you
experience any inconvenience with this DVD
player. If the problem is not listed or if the
provided solution does not correct the
problem, please return to point of sales within
12 months of purchase.
Even if pictures are compressed 15-20 times.they
still have good effect. Supported by most picture
processing software,fit for picture storage, it has small
data and easy use .This machine can read. JPEG-
fomat-made picture CD disc.
About Your DVD Player ............................ 4
Best Location..........................................................4
To Obtain a Clear Picture......................................... 4
Playable Discs........................................................4
Digital Audio Output ................................................4
Laser-Head Over-Current Protection System ............4
Mp3 function.............................................25
JPEG files................................................ 26
Trouble shooting....................................... 26
Technical specifications ............................ 27
Problem Possible Solution
No power
1. Check to ensure that the power plug is
securely in the wall outlet.
No sound
Press revelant number key to select picture display.
1. Put in disc correctly, the machine begins to
search disc information.
2. Press number key to select picture.
3. It s efficient only in present picture when press
number key.
Use of Disc ...............................................5
Handling.................................................................5
Cleaning.................................................................5
Storing...................................................................5
1. Check the connection between the DVD
player and the TV set, amplifier, or any
other unit it is connected to.
2.Check to ensure the TV and amplifier are
in the correct mode.
Select to play by menu
1. Put in disc, machine searches disc information and
main menu displays on screen. press number key
from 1 to select picture. press play key to make sure.
2. Press direction key to select picture then press
play key.
Front and Back panels .. .............................6
Front Panel.............................................................6
Back Panel.............................................................6
No picture
1. Check the connection between the DVD
player and the TV set or any other unit it
is connected to.
2.Check to make sure TV is turned on.
Disc does not play
Remote Control..........................................7
Operating the remote control.......................8
Connecting Devices....................................9
Speakers..................................................10
Arrangement of speakers...........................10
Connecting speakers.................................11
Connecting antenna..................................12
Connecting power supply...........................13
Playing the radio.......................................14
Basic DVD operation.................................15
Functions.................................................16
3. In condition of stop. press direction key to select
other pictures.
1.Check to make sure the disc is loaded
correctly label side facing up on disc tray.
2.Check that disc is clean from dirt, dust,
fingerprints, and smudges.
3.Check to ensure disc is with in the guides
on the tray.
4. In condition of stop. select the first line file item
on the right. Then press play key, to return to upper
menu.
3
26
4.Check if parental lock function is on.
5.Make sure disc is for use in region
Remote does not work.
1. Check batteries; possibly replace.
2. Check to ensure there isn't any obstacles
between the remote sensor on the unit's
front panel and the remote control.
3.Be sure the remote is aimed at the remote
sensor.
Divided picture
1.Check that disc is clean and has no
scratches.
2.The unit is controlled by a micro computer,
which may need to be reset. Turn off the
unit's power, wait several seconds, then
turn back on.
No color picture
1.Check to see if the S connector is damag-
ed (bent pin).
MP3 discs don't play
1. Use another software edition to re burn
disc, as the edition used may not be com-
patible with the player.
2. Use new editions of software such as Audio
station 4, "Easy CD Creator", To ast
Titanium, etc.
3. Make sure MP3 file is not encoded with a
variable bit rate, such as provided by Real
Networks.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT YOUR
DVD PLAYER
MP3 FUNCTION
The following will help you get the most enjoyment from your DVD receiver system.
OPERATION OF MP3 FUNCTION
BEST LOCATION
Mp3 is an audio compression mode using Level 3 of the international standard MPEG, whereby sound
signal is compressed at a rate of 12:1. AMp3 disc can record music for playing over 600 minutes or
recording over 170 songs, rivaling CDs in sound quality.
The unit should be placed on a firm, flat surface, away from VCRs, stereos, radios, or large
speakers, as the magnetic flux from these devices may cause distortion in the sound and a poor
picture. If placed in a cabinet, be sure there is at least "1" of free space completely around the unit
for proper ventilation.
To play a MP3 disc
TO OBTAIN A CLEAR PICTURE
A DVD receiver is a precision device. If the optical pick-up lens and disc drive parts become dirty
or worn down, picture quality will become poor. Store DVD player in a clean dust free environment.
Files Menu of Mp3 play
When playing a Mp3 disc, 2 files menus can be selected by pressing PROG key: File list, Folder.
1. FILE LIST
PLAYABLE DISCS
It may select the files to be played by pressing UP DOWN, arrow key combining with ENTER key, or
using number keys and ENTER key to select directly. If the number input is out of the music number,
"CURRENT TRACK NUMBER" will display on screen.
This DVD receiver system will play the following types of discs: DVD, MP3, CD, CD-R,
and CD-RW with super-error correction ability. It is also capable of displaying picture CDs and digital
photo albums. It supports eight languages, up to 32 subtitles, and multi-angle viewing. It features
easy setup and operation with on-screen menus. It has full function CPU up grade able capability.
2. Folder
Display menu first then press UP DOWN, LEFT RIGHT arrow and ENTER key to select subdirectory and music.
DIGITALAUDIO OUTPUT
The unit's coaxial output capability enables you to connect an external six-channel AV amplifier
and processor with built-in Dolby Digital code with just one cord. This enables you to conveniently
enjoy different DVD, CD, and Mp3 discs.
ANALOG AUDIOOUTPUT
Speaker system plug-and-play convenience through the built-in six-channel power amplifier
eliminates the use of an external power amplifier.
LASER-HEAD OVER-CURRENT
PROTECTION SYSTEM
To extend the service life of the laser head, the unit includes a unique laser-head over-current
protection system, ensuring a constant laser current.
4
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETUP
USE OF DISCS
Pink Noise Setting
This page contains valuable information regarding the handling, cleaning, and storage of discs
played in this unit.
Pink Noise is test tone set to Off and select test
LEFT, CENTER, RIGHT, RIGHT SURROUND and LEFT
SURROUND channle.
A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER.
C. Select Pink Noise and press ENTER.
D. Select the desired Pink Noise setting and press
ENTER.
More Aud
Language Video
Audio
Rating
Handling
Do not touch the playback side of the disc.
Prologic
Off
On
Off
Off
Off
Off
Left
Center
Right
Left Surr
Right Surr
Subwoofer
Subwoofer
Pink Noise
DRC
Do not attach paper or tape to discs.
Do not stick or write anything on the surface. Protect against fingerprints.
Always hold a disc by the center and edge portions.
LPCM 48k DS
this function can select test LEFT, CENTER,
RIGHT, RIGHT SURROUND and LEFT
SURROUND channle.
Cleaning
Fingerprints and dirt on the disc may cause picture and/or sound deterioration. Wipe the disc from
the center outward with a soft cloth. Always keep the disc clean.
If you can not wipe the dirt off, lightly use a slightly moistened soft cloth and finish with a dry cloth.
Do not use any type of solvent such as: Paint thinner, benzene, commercially available cleaners or
anti-static spray for vinyl LPs.
E. Press SETUP to save and exit.
DRC Setting
More Aud
Language Video
Audio
Rating
DRC is Dynamic Range Control.
A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER.
C. Select DRC and press ENTER.
D. Select the desired DRC setting and press ENTER.
Select Off or On state.
Prologic
Off
On
Off
Off
Off
Subwoofer
Pink Noise
DRC
Off
On
Storing
LPCM 48k DS
Do not store discs in places subject to direct sunlight or near heat sources.
Do not store discs in places subject to moisture and dust.
Store discs vertically in a case. Stacking or placing objects on discs outside of their cases may
cause warping.
E. Press SETUP to save and exit.
LPCM 48k DS Setting
A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER.
C. Select LPCM 48k DS and press ENTER.
D. Select the desired LPCM 48k DS setting and press
ENTER.
Select Off is LPCM 48k.
Select On is LPCM 96k.
E. Press SETUP to save and exit.
More Aud
Language Video
Audio
Rating
NOTE: We are not responsible for damage that may occur to any disc that is operated in this unit or
not handled, cleaned, or stored as suggested above.
Prologic
Off
On
Off
Off
Off
Subwoofer
Pink Noise
DRC
Off
On
LPCM 48k DS
24
5
Rating Setup
The Rating menu allows you to block playback
of DVDs based on their ratings.
Language
Video Audio
More Aud
Rating
1:Kid Safe
2:G
3:PG
4:PG-13
5:PG-R
6:R
Password
Rating
----
Setting the Password & Rating Level
The DVD player allows you to block playback
of inappropriate content with a password-
protected Rating system (not all discs are rated).
A. From Stop mode, press SETUP.
8. Adult
LOAD Factory Reset
7:NC-17
8:Adult
B. Select Rating and press ENTER.
C. Select Rating and press ENTER repeatedly to set the rating from 1 (most restrictive)
to 8( least restrictive ).
If a password has already been set, the lock icon will be closed. You will not be
able to select Rating until you SELECT the correct password using the 0-9 keys.
D. Select Password.
E. Use the 0-9 keys to SELECT a 4-digit password and press ENTER. The lock icon will
close to indicate that the rating and password are set.
F. Press SETUP to save and exit.
Not all DVDs are rated.
DVDs that are rated higher than the level you select will not play without SELECTING
the correct PASSWORD.
If you forget your Rating password, select 0000 to clear the memory. Keep this pass-
word out of reach of children as if will always unlock the Parental Control setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT AND
BACK PANELS
SYSTEM SETUP
MP3 Setting
Front Panel Functions
Follow these steps to set the outgoing digital audio format of MP3
tracks (Note: The analog format is fixed to 2 channel ):
Language
Video
Audio
More Aud
Rating
4
5
6
7
2
3
1
A.
B.
C.
D.
From Audio mode, press SETUP.
Select Audio mode, press ENTER.
Select MP3 and press ENTER.
Analog Out
Digital Out
PCM
Raw
Off
AC3
MP3/WMA
Others
5.1 channel
5.1 channel
5.1 channel
PCM
PCM
PCM
VOLUME
Set Digital out to:
DVD/CD/MP3/HDCD/CD-R/CD-RW
PCM (default) to output 2 channel digital from the optical/coaxial
digital audio outputs; e.g.,to a Minidisc recorder.
Off to disable MP3 digital output.
DOWN
UP
5.1 channel
2 channel
Off
DVD6040 DVD HOME THEATER
E.
Press SETUP to save and exit.
Others Setting
Follow these steps to set the outgoing analog and digital audio
format of others tracks:
A. From Stop mode, press SETUP.
B. Select Audio and press ENTER.
C. Select Dolby D and press ENTER.
D. Set Analog out to:
2 Channel (default) to output 2 channel stereo audio from the
stereo audio output; e.g.,to a VCR or TV.
E. Set Digital out (from Optical out) to:
1. POWER
Language
Video
Audio
More Aud
Rating
4. PAUSE/DOWN
Use this button to pause play function while in
DVD mode.
While in the tuner mode, you may press this button
for radio down search.
Before plugging the power cord into the AC
outlet, check to make sure all of the connections
have been properly completed. When they have
been, carefully plug power cord into outlet.
Press the POWER button on the front panel
to power the unit.
When the unit is initially powered, a brief surge
of electricity may cause interference with other
electronic equipment on the same circuit. If this
occurs, connect the unit to an outlet on a
different circuit.
2. OPEN/CLOSE
Use this button to open and close the disc tray
while in DVD mode.
When in the Tuner mode, this button is used to
select preseting or tuning mode.
3. PLAY /AUTO
Analog Out
5.1 channel
5.1 channel
5.1 channel
Digital Out
PCM
PCM
AC3
MP3/WMA
Others
PCM
Raw
Off
PCM
5.
STOP /UP Button.
Use this button to stop play function while in DVD
5.1 channel
2 channel
Off
mode.
While in the tuner mode, you may press this
button for radio up search.
6. INPUT SIGNAL SOURCE
Use this button to select the proper input signal
source. (Note: The selected input will correspond to
the selected input terminal on the rear panel.)
7. VOLUME
Use this button to control the unit's volume. It
controls all six channels simultaneously.
PCM (default) to output 2 channel digital audio from the optical/coaxial digital audio outputs; e.g.,to a Minidisc recorder.
Raw to output the raw 2 channel digital bitstream form th optical/coaxial digital audio outputs; e.g., to an external
amplifier.
Off to disable CD others audio output.
Press SETUP to save and exit.
F.
More Audio Setup
The More Audio menu includes Prologic and Subwoofer settings.
6
23
Use this button to begin play function while in
DVD mode.
When in the tuner mode, you may press this
button for automatic search..
Prologic Setting
The DVD player has a built-in Dolby Prologic decoder to provide virtual surround sound for PCM
(stereo) source material from the 5.1 channel analog audio outputs.
A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER.
C. Select Prologic and press ENTER.
D. Select the desired Prologic setting and press
ENTER:
More Aud
Language Video
Audio
Rating
Prologic
Off
Off
On
Subwoofer
Pink Noise
DRC
On
Off
Off
Off
Back Panel Functions
1. ANTENNA
Use to connect the provided indoor FM and
AM loop antennas.
2. AUX IN
Use to connect input for both auxiliary 1 and 2
music sources.
3. AUDIO OUT
Use to connect both the right and left channel
line outputs as well as subwoofer output.
4. VIDEO OUTPUT
Auto stereo audio soundtracks will be output in
Dolby Prologic mode.
On all audio soundtracks will be output in Dolby
Prologic mode.
Off (default ) Dolby Prologic decoding will always
be inactive.
7. FRONT/MAIN
LPCM 48k DS
Use to connect the four terminals of the left
and right front or main speakers.
8. CENTER/SUBWOOFER
Use to connect the four terminals of the center
and subwoofer speakers.
9. COAXIAL DIGITAL AUDIO OUTPUT
10. 120V~60Hz
This unit comes with an AC power cord. Be
sure its prongs are dry before plugging it into an
electrical outlet. Take caution not to overextend
the cord or walk on it.
E. Press SETUP to save and exit.
Subwoofer Setting
You must indicate in the menu system whether or not your audio setup includes a Subwoofer
(the 1in 5.1 sourround sound).
A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER.
C. Select Subwoofer and press ENTER.
D. Select the desired Subwoofer setting and press
ENTER.
On (default) indicates that you are using a Subwoofer
for LFE (low frequency effects) signals.
E. Press SETUP to save and exit.
5. S-VIDEO OUTPUT
6. REAR
Use to connect the four terminals of the left
and right surround sound speakers.
More Aud
Language Video
Audio
Rating
11. COMPONENT VIDEO OUTPUT
12.OPTICAL OUTPUT
Prologic
Off
On
Off
Off
Off
On
Off
Subwoofer
Pink Noise
DRC
9
10
1
LPCM 48k DS
SW
SR
SL
FR
FL
CEN
L
SW
COAXIAL
120V~~60Hz
Cr/Pr
Cb/Pb
Y
SPEAKERS IMPEDANCE 6
8
R
VIDEO
S-VIDEO
OUTPUT
2
3
4
5
12
11
6
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE
CONTROLLER
SYSTEM SETUP
Select [Video Output], and press ENTER or
to display
Language
Video Audio
More Aud
Rating
1
the [Video Out] submenu:
OPEN/CLOSE
MUTE
TV Shape
A. Press ENTER to confirm
MUTE
OPEN/CLOSE
4:3 PS
2
TV System
Video Output
B. Press SETUP to exit the Setup Menu
NTSC
3
DVD SELECTOR
AM/FM TUNER
AUX1 SELECTOR
AUX2 SELECTOR
N/P TV MODE SELECTOR
SUBTITLE
S-video
S-Video
YUV
Note: The Composite video and
DVD
N/P
TUNER
AUX 1
AUX 2
4
S-video output is always available.
[S-Video] -Select if you connected the DVD player
5
SUBTITLE LANGUAGE ANGLE
to your TV using the composite Video output.
6
[YUV] -Select if you connected the DVD player to your TV using the YUV output.
[Y Pb Pr] - Select if you connected the DVD player to your TV using progressive scan.
7
8
Press
to change your selection
9
LANGUAGE
Audio Setup
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
ANGLE
The Audio menu allows you to set the analog and digital audio outputs to correspond with the external components you have
connected to the player. For example, if you connected the player to a TV using the Stereo Audio jacks, you should set Dolby
Digital and others settings to 2 channel to enjoy downmixed stereo audio.
0-9 NUMBER KEYS
+10
+10
TIME
PROG CH LEVEL
TIME
You can set the audio format for each of the following sources: Dolby Digital, MP3, CD and Others.
DVD playback must be stopped in order to adjust the Audio setup.
TITLE
DISPLAY SLOW VOLUME
TITLE
MENU
AC-3 Setting
PROG PROGRAM
Follow these steps to set the analog and digital audio formats of
outgoing Dolby Digital 5.1 soundtracks:
A. From Stop mode, press SETUP.
B. Select Audio and press ENTER.
C. Select Dolby D and press ENTER.
D. Set Analog out to:
FM MODE
PRE/TUN
CHANNEL SELECTOR
VOLUME INCREASE
Language
Video
Audio
More Aud
Rating
VOLUME DECREASE
SCREEN DISPLAY
SLOW MOTION
MENU
Analog Out
Digital Out
ENTER
PCM
Raw
Off
AC3
MP3/WMA
Others
5.1 channel
5.1 channel
5.1 channel
PCM
PCM
PCM
6 Channel (default) to output Dolby Digital 5.1 channel
audio from the 5.1 channel analog audio outputs; e.g.,
to a 5.1 channel amplifier.
REPEAT
SETUP
PROLOGIC
STEP
ZOOM RESUME
5.1 channel
2 channel
Off
7
2 Channel to output downmixed 2 channel stereo from
the stereo audio outputs; e.g., to a VCR or TV.
E. Set Digital out to:
22
FM STEREO / MONO MODE
PRESET/TUNING
SCROLL UP
PLAY
PAUSE
A-B
UP
STOP
PCM (default) to output 2 channel digital from the optical/coaxial digital audio outputs; e.g., to a Minidisc recorder.
RAW to output the raw 5.1 channel digital bitstream form the optical/coaxial digital audio outputs; e.g., to an
external amplifier with a Dolby Digital decoder.
MEMO AUTO
DOWN
SCROLL RIGHT
SCROLL DOWN
SCROLL LEFT
ENTER
Off to disable Dolby Digital decoder.
Press SETUP to save and exit.
DVD6040
F.
PCM stands for Pulse Code Modulation, and is the standard 2-channel stereo format used for audio Cds.
SETUP
REPEAT
PRO LOGIC
STEP
ZOOM
RESUME PLAY
35 STOP
36 PAUSE
37 PLAY
38 A-B REPEAT
39
40
41
42
DOWN (search down for radio stations/ previous track)
UP (search up for radio stations/next track)
MEMO (memory/rewind skip)
AUTO (automatic search/forward skip)
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE
REMOTE CONTROL
SYSTEM SETUP
Notes:
Do not direct the remote sensor toward
Battery Installation
1. Push down and out on the battery Compart-
ment cover to remove it.
any light source, such as direct sunlight or
a strong fluorescent light, as it may cause
the unit to not operate correctly.
When other remote controls are used
nearby or when the remote is used near
equipment using infrared rays, interference
may occur.
Video Setup
Select [Video] in the Setup Menu, and press ENTER to display the [Video] submenu:
2. Insert the two "AAA" batteries into the battery
compartment of the remote control, making
sure the + and - signs on the batteries and
inside the battery compartment match up.
3. Replace the battery compartment cover.
Language
Video Audio
More Aud
Rating
Press
to
TV Shape
4:3 PS
select the menu
item
NTSC
TV System
Video Output
S-Video
Placing an object on the remote control
may cause it to inadvertently depress a
button, changing a function and shortening
battery life.
Notes:
Do not mix batteries from different manu-
facturers, nor old ones with new.
If the remote control will not be used for an
extended period of time, remove the
batteries to prevent damage-causing
corrosion.
A. Press ENTER or
to set
B. Press
to return to the Setup Menu
Do not glaze the front of the DVD receiver
with colored glass, as it may cause
interference with normal operation of the
controller.
Select [TV shape], and press ENTER or
to display the [TV shape] submenu:
Language
Video Audio
More Aud
Rating
Remove dead batteries immediately to
prevent damage-causing corrosion.
If battery leakage occurs, wipe the battery
liquid from the battery compartment, then
replace both batteries.
TV Shape
4:3 PS
NTSC
4:3 PS
Make sure there is no barrier between the
remote control and remote sensor, as it
could prevent the unit from receiving the
signal.
4:3 LB
16:9
TV System
Video Output
Press
to change your selection
S-Video
Do not spill water or put wet items on the
remote control.
Always replace both batteries at the same
time, using new, fully charged batteries.
Life expectancy of batteries may vary
depending on amount of use.
21
8
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Never disassemble remote control.
[4:3 PS] -Pan and scan refers to pictures where part of pictures is cut
off so it fills the whole screen.
[4:3LB] -Letter Box refers to pictures where black bands appear at the
top and bottom.
[16:9] -The picture fills the screen of a wide-screen (16:9) television.
Note: Not all DVDs offer movies in Full Screen format. If not, the disc will override your
TV Display setting and the movie will be displayed in Letterbox format.
Using the Remote Control
BATTERIES
Point the remote control at the remote sensor
on the DVD receiver. When the signal is
received from the remote control, the unit will
function accordingly. The remote will operate to
approximately 16' from the remote sensor at an
angle of around 300 each direction.
INCORRECT USE OF BATTERIES MAY
CAUSE THEM TO LEAK, CORRODE OR EXP
LODE.
Select [TV system] and press ENTER or
to display the [TV system] submenu:
Language
Video Audio
More Aud
Rating
TV Shape
4:3 PS
TV System
Video Output
NTSC
NTSC
S-Video
PAL
Press
to change your selection
AUTO
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu.
[NTSC] -Select if you are using NTSC signal system to match your TV set.
[PAL] -Select if you are using PAL signal system to match your TV set.
[AUTO]- Select if you are using AUTO signal system to match your TV set.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING
DEVICES
SYSTEM SETUP
Language Setup
Select [Subtitle], and press ENTER or
to display the [Subtitle] submenu:
CD
Language
Video Audio
More Aud
Rating
OSD Menu English
English
Subtitle
Audio
English
English German
French
Press
to change your selection
DVD Menu English
Spanish
Auto
Off
Note: Subtitle languages vary by disc.
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Select [Audio],and press ENTER or
to display the [Audio] submenu:
Language
Video Audio
More Aud
Rating
OSD Menu English
SW
SR
SL
FR
FL
CEN
L
SW
COAXIAL
Subtitle
Audio
English
English
120V~~60Hz
English
Cr/Pr
Cb/Pb
Y
SPEAKERS IMPEDANCE 6
8
R
VIDEO
S-VIDEO
OUTPUT
Press
to change your selection
DVD Menu
English German
French
Spanish
Note: Audio languages vary by disc.
9
20
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Select [DVD Menu], and press ENTER or
to display the [DVD Menu] submenu:
ACTIVE
SUBWOOFER (OPTIONAL)
Language
Video Audio
More Aud
Rating
AMPLIFIER
Subtitle
Audio
English
English
DVD Menu English English
Press
to change your selection
German
French
Spanish
Note: Menu languages vary by disc.
Red terminal (marked R) is for connecting the
right channel. The white terminal (marked L)
is for connecting the left channel. The yellow
terminal is for video connection. Make sure
all connections are securely made. Improper
connections may cause noise, poor perfor-
mance, or cause damage to the equipment.
Do not tie the AV cord with any other cords,
such as the power cord or speaker wires, as
it may result in poor picture and/or sound
quality.
Connection terminals for this DVD receiver
are found on the rear panel. Read carefully
and follow the manufacturers' instructions
of any video and audio device being
connected to this unit.
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Do not connect the power until all connections
have been properly completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
ARRANGEMENT
OF SPEAKERS
SPEAKERS
SYSTEM SETUP
The ideal surround sound speaker configur-
ation may vary according to room size and wall
material. The figure below illustrates a typical
arrangement.
The configuration and arrangement of a
surround sound system's speakers is critical.
For maximum listening enjoyment, refer to the
Arrangement of Speakers section in this manual
prior to connecting speakers.
SETUP
Hints:
In stop mode, press SETUP, and the TV screen will display the Setup
Front or main speakers and central speaker
should be placed at the same level and in a way
that sound is oriented toward the listener's ears.
3D surround sound or rear speakers should
be placed 3' higher than the height of listener's
ears.
Subwoofer speaker may be placed anywhere
within the room, as its location produces little
effect on a listener's sensation to sound. To
obtain the optimum bass effect, a subwoofer is
recommended in home theater systems.
Surround Sound Speakers
Front or main right and left speakers;
center speaker
These three speakers provide extensive
sound imaging and augment the dynamic effect
of the audio. A movie's principal dialogue comes
through these speakers.
Menu as follows:
Language
Video Audio
More Aud
Rating
Press
to change items
Rear or surround sound speakers
These two speakers provide 3-D dynamic
sound effects, and create an enveloping
atmosphere, as they add background sounds.
.
Setup Menu
Subwoofer speaker
Provides rich and powerful bass, adding a
powerful dimension of realism.
A. Press ENTER to display each submenu
B. Press SETUP to exit the Setup Menu
Language Setup
Note: Audio recorded for the center speaker and
subwoofer will be assigned to the front and 3-D
rear speakers to obtain the optimum 3-D
surround sound effect.
Select [Language] in the Setup Menu, and press ENTER to display the [Language] submenu:
19
10
Language
Video Audio
More Aud
Rating
1
4
OSD Menu English
Subtitle
Audio
English
English
3
Press
to
2
5
select the menu
item
DVD Menu English
A. Press ENTER or
to set
B. Press
C. Press
to go back one menu
OR repeatedly to return to the Setup Menu
Select [OSD Menu], and press ENTER or
to display the [OSD Menu] submenu:
8
Language
Video Audio
More Aud
Rating
OSD Menu
Subtitle
English English
Press
to change your selection
English
English
English
Deutsch
Français
Español
Audio
DVD Menu
6
7
1.TV set or screen
6.3-D surround sound left speaker
7.3-D surround sound right speaker
8.Viewer's location
A. Press ENTER to confirm.
B. Press SETUP to exit the Setup Menu.
2. Front or main left speaker
3.Subwoofer
4.Center speaker
5.Front or main right speaker
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING
SPEAKERS
FUNCTIONS
REPEAT
This well-designed DVD receiver provides
optimum sound quality when the speakers used
are within the range of their rated impedance.
Connecting Speaker Cables
MENU: MENU/PBC
REPEATALL
With the PBC function on, choosing a song
on a CD can only be done when at the main
menu. With the PBC function off, song selections
can be made by entering the relevant number
keys. The menu content of the disc will appear
when the MENU button is pressed while a DVD
disc is playing.
1.Peel off approximately 1/ 2" of cable
insulation
2.Tighten the wire end (#2 below)
3.Open cable terminal by pressing back on
tab
4.Insert wire end into terminal
5.Release tab; make sure wire is in terminal
securely
Important
The minimum impedance of the five speaker
terminals is 4 ohm; for the subwoofer, it is
8 ohm.
REPEAT
REPEAT OFF
AUDIO
MENU
SUBTITLES
PLAY
If you want to use only one speaker or listen
to monophonic music, do not parallel connect
individual speakers to the left and right
channel terminals. See the figure on the left
below.
Note: To prevent damage to the circuit, care
should be taken to prevent short circuiting from
occurring at the positive and negative poles of
the speaker cord.
The repeat mode changes each time the
REPEAT key is pressed (i.e., from title repeat to
chapter repeat, all repeat , to repeat off.)
When playing CD or Mp3, press the REPEAT
button to get the following display. Repeat Single,
Repeat ALL and Repeat off.
A-B Repeat
The A-B repeat function allows you to
re-show sections between two specific points
(A and B) on a disc.
1
2
1. Press the A-B button while the disc is
playing to set point A, the beginning spot.
When playing DVD, press REPEAT button to get
the following player mode: Repeat Chapter,Repeat
Title and Repeat Off.
3
4
5
REPEAT A
A-B
Zoom
Apicture may be enlarged up to four times
during either playback or slow motion through
the unit's zoom function. Press the ZOOM key
once and it enlarges the image 2x; press a
second time and the image enlarges 3x; A
third pressing enlarges the image 4x. A forth
pressing the image 1/2x, a five pressing the
image 1/3x, a sixth pressing the image 1/4x . To
return to normal-size playback, press the ZOOM
key a seventh time. Enlargement takes place
in the center of the picture.
11
18
Subwoofer speaker
2. Press the A-B button again while the disc
is playing to set point B, the ending spot. The
section between A and B will replay.
Surround speaker
REPEAT AB
Center speaker
Vol set
When a DVD disc is played, press this key
and Volume key to adjust channel level.
Surround speaker
3. Press the A-B button a third time to cancel.
Volume and Mute
The volume on this DVD receiver is easily
controlled with the remote control by pressing
either the VOL key to raise the volume or the
VOL key to lower it. By pressing the MUTE
key, no audio will be heard. To rein state the audio,
press the MUTE key again.
Repeat Play
This DVD receiver allows repeated playback
of specific titles, chapters/tracks, or segment.
It even allows switching between two items that
are being repeated.
SW
SR
SL
FR
FL
CEN
L
SW
COAXIAL
120V~~60Hz
1. Select the item to repeat.
2. Press the REPEAT key.
Cr/Pr
Cb/Pb
Y
SPEAKERS IMPEDANCE 6
8
R
VIDEO
S-VIDEO
OUTPUT
Program
Allows you to program specific tracks in a
desired order of play. Press PROG key program
menu well appear on the screen, set up the
program play in number key. The scroll to the
START, Press ENTER key to program play. To
exit the Programmed play mode, press the
PROG button again.
REPEAT SINGLE
REPEAT
AMPLIFIER
Main speaker
Main speaker
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING
ANTENNA
FUNCTIONS
Radio signals may be difficult to receive in
some buildings and under certain conditions.
The provided antennas will help in their reception.
They are intended for indoor use only.
N/P
Language
The unit has the capability to show movies in
one of eight languages.
1. Press the LANGUAGE key. The language
menu will appear. Select the desired language
by pressing the LANGUAGE key.
FM Indoor Antenna
This DVD receiver supports video output of
various systems, including auto, NTSC, and PAL.
The picture will blink and become colourless
when the wrong system is selected. If this
occurs, press the N/P key on the remote control,
then select the correct system (NTSC for North
America, PAL for Europe). For more information
on output format, refer to the TV set's manu-
facturer's instructions.
The FM antenna should be fully extended
and in a direction that provides the clearest
signal. Secure the antenna ends in a location
where distortion is a minimum. If reception
remains poor, an outdoor antenna may be
necessary.
AM Loop Antenna
The placement of the AM loop antenna should
be in a direction that provides the clearest
reception. Keep as far as possible from DVD
receiver, TV set, and speaker and power cords.
If reception remains poor, an outdoor antenna
may be necessary.
LANGUAGE
To connect the FM antenna:
1.Open cable terminal by pressing back on tab
2.Insert wire end
AUDIO 1/8 AC-3 2CH ENGLISH
Subtitles
3.Release tab; make sure wire is in terminal
securely
The unit has the capability to display subtitles
in any of 32 different languages.
1. Press the SUBTITLE key. The subtitle
menu will appear. Select the desired language
by pressing the SUBTITLE key.
Note: The disc being played must be multi-lan-
guage encoded.
SUBTITLE
SUBTITLE 02/08 ENGLISH
LOCATING A TITLE
DVD discs are normally divided into titles,
which are then sub-divided into chapters. A
specific title can be easily found with this unit.
Specific titles can be found using either the title
menu function, if the DVD disc contains a title
menu, or through its unique title number.
2. To remove the subtitles from view, press
the SUBTITLE key until they disappear.
To connect the AM loop antenna:
1.Hold down handle
AM
17
12
2.Insert wire end into hole
3.Release handle
Title Menu Function
1. Press the TITLE key. The title menu will
appear on the TV screen.
2. Press the appropriate scroll key to select
the desired title. A title may also be located by
pressing its assigned number with the number
buttons.
SUBTITLE OFF
Position for best reception
FM
Note: The disc being played must be multi-
subtitle encoded.
3. Press the ENTER key . This will start
playback from chapter 1 of the selected title.
3
1
2
Outdoor AM antenna
Camera Angle
The ability to change the camera angle allows
viewer to play director and watch a movie from
different perspectives.
1. Press the ANGLE key on the remote control.
With each press, the camera angle changes.
2. The key may be pressed only when the
flashing angle icon appears in the unit's display
panel.
Note:
Some discs do not respond to this function. If
different instructions appear on the TV screen,
follow those instructions. The Instructions given
here describe the basic procedure. Procedures
may vary depending on the content of the DVD
disc. When playing a VCD2.0 disc, TITLE key
can be used to return to menu.
Coaxial cable(75 ohm)
FM
ANGLE
1/4
Coaxial cable (75 ohm)
Pro Logic selector
When player DVD / VCD disc, first press STOP
key, than press Pro Logic key to select Pro Logic
ON or OFF.
When player CD and at tuner state, press
Pro Logic key to select stereo or 5.1 channel
output.
Outdoor FM antenna
Note: Camera angle may be changed only in
discs with multi-angle capability encoded
into them.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC DVD
OPERATION
CONNECTING
POWER SUPPLY
FUNCTIONS
Screen Display
2X
AUTO
While a disc is playing, the status of various
functions may be checked, such as the tile, track
number, and several time categories.
POWER
1. Press the DISPLAY key once and the title
appears along with the chapter and how much
time has played.
2X
DISPLAY
MEMO
00:04:08
00:40:52
VOLUME
DVD/CD/MP3/HDCD/CD-R/CD-RW
DOWN
UP
DVD6040 DVD HOME THEATER
To activate either function, simply press the
key or key on the remote control. The
speed changes each time the key is pressed.
To resume normal playback, when press the
PLAY key.
2. Press the DISPLAY key again and the
remaining time for that particular title appears
while soundtrack is CD/VCD format.
VCD 2.0
Track 1/15
Before plugging the power cord into the AC outlet, check to make sure all of the connections
have been properly completed. When they have been, carefully plug power cord into outlet.
Memory Playback
This unit allows the viewer to stop playback,
then later continue playback from that exact disc
location. Press the STOP key to halt playback.
The unit then will memorize the location where
playback was stopped. To resume watching,
press the RESUME or PLAY key and the unit will
resume playback from the exact location where
playback was stopped. (Exclude Mp3 DISC)
When you play DVD discs, press MENU or
TITLE key return menu and title, the unit then
will memorize the location, To resume watching
press the RESUME key and the unit will resume
playback from the exact location.
Press the POWER button on the front panel to power the unit. The display panel will light.
When the unit is initially powered, a brief surge of electricity may cause interference with other
electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different
circuit.
13
3. Press the DISPLAY key again and the total
elapsed time for that particular chapter appears.
while soundtrack is DVD format.
16
17
DVD
Title
Audio
Subtitle
00:01:32
Chapter 2/4 Angle 1/1
6CH
01:44:34
1/10
1/3
1/1
BASIC OPERATION
RESUME
RESUME
Selecting Sound Source
Volume Control
1. Press any function button (DVD, AM/FM,
AUX1, AUX2) to select the desired sound source.
The appropriate symbol will appear in the display.
2. When the AM/FM tuner button is pressed,
the last station listened to will play.
The volume may be adjusted by either turning
the large volume knob on the front panel or
using the appropriate volume button on the
remote control.
4. Press the DISPLAY key again and the
display turns off.
Slow Motion
This DVD receiver has the ability to play
discs in slow motion in either forward or reverse
direction. Each time the SLOW key is pressed,
the speed will slow from forward slow speed1/ 2,
to 1/ 4, to 1/ 8, to 1/ 16 to reverse slow speed 1/ 2,
to 1/ 4, to 1/ 8, to 1/ 16, to normal speed. To
resume normal playback, press the PLAY key.
Mute
Note: The desired program source will not play
unless it and the selected signal button coincide
with the active program source signal input.
Pressing the MUTE button temporarily mutes
every speaker. To resume audio, press MUTE
button again.
SLOW
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC DVD
OPERATION
PLAYING THE RADIO
Once the unit is connected to a television
set and any other accessory equipment, you
are ready to enjoy the excitement of DVD videos
or your favorite CDs and MP3 files.
Once it has read the disc, the unit automati-
cally will begin playback. When playing a DVD,
the DVD title or menu will appear. CD tracks are
played in sequence.
OPEN/CLOSE
MUTE
DVD
N/P
TUNER
AUX
1
AUX
2
SUBTITLE LANGUAGE ANGLE
Note:
To play a DVD video disc:
+10
TIME
It is possible to damage a disc if it is not
placed correctly on the guides in the disc tray.
This may also cause the DVD player to
malfunction. Do not force or place anything
other than a 5" DVD or CD onto the disc tray.
Never move the DVD player during playback,
as this may cause damage to the disc as well as
the player. To open and close the disc tray, only
use the OPEN/CLOSE key found on both the
remote control and on the unit's front panel.
Turn on the TV and select the A/V mode. If
the set features an SCART connection, be sure
the SCART mode is selected from the TV menu.
Turn on amplifier, if connected. Select AC-3 or
DVD mode.
PROG CH LEVEL
TITLE
DISPLAY SLOW VOLUME
MENU
FM MODE
PRE/TUN
ENTER
SETUP
REPEAT
VOLUME
PROLOGIC
STEP
ZOOM RESUME
DVD/CD/MP3/HDCD/CD-R/CD-RW
PLAY
A-B
DOWN
UP
PAUSE
STOP
To play an audio disc:
DVD6040 DVD HOME THEATER
MEMO AUTO
DOWN
UP
Turn on the audio system and choose the
input source that is connected to the DVD player.
Set the SPDIF OUTPUT to SPDIF OFF from the
SETUP MENU display if you don't have the
proper equipment for Dolby Digital surround
sound.
DVD6040
PLAY
PLAY
REMOTE CONTROL
Positioning
Automatic Tuning
1. Press the POWER key on front panel.
DISC LOADING appears on screen.
1.Press TUNER button to select desired wave
band (AM or FM).
This unit will store up to 50 individual AM or
50 individual FM radio stations in its memory.
FRONT PANEL
2.Press UP or DOWN button to find a station.
The frequency will change with each press.
When a station's signal is received, it will
appear in the display.
3.To lock on to a station quickly, hold the UP
or DOWN button for two seconds. The unit
will start automatic tuning. When a station
is found, automatic tuning stops.
4.To add a station to memory, press the MEMO
button. The memory storage number will
blink for four seconds in the display. Press
MEMO again to store the station.
1.Press the AUTO button. The word AUTO
will appear in the display and the automatic
tuning mode is activated.
2.Stations will be stored in ascending order
until 50 stations of that particular wave band
have been saved. When a station is stored, the
memory storage number, as well as the station's
frequency, will flash for four seconds in the
display.
LOADING
Press PAUSE key:
POWER
PAUSE
PAUSE
15
14
REMOTE CONTROL
FRONT PANEL
If there is no disc, NO DISC shown on screen:
3.When the total number of stations reaches
50, in a particular wave's (AM or FM) memory,
no further station in that wave band will be saved.
5. PREV/NEXT playback
Press key or key , play previous or next
track. To resume normal playback, press PLAY key.
No Disc
Memory number
Press PREV key:
To Play Preset Stations
1.Press the TUNER button to select the
desired wave band.
2.Press the PRE/TUN button.
3.Press any of the numbere buttons to
select the desired station's memory number.
For example, to play the station at memory
#5, simply press the 5 button; for memory
#17, press the 1 button followed by the 7
button.
PREV
DOWN
REMOTE CONTROL
Wave band Station frequency
2. Press the OPEN/CLOSE key. The disc
tray will open.
OPEN
Press NEXT key:
5. To reduce noise when an FM-stereo program
has been received, press the FM button. The
word STEREO will disappear from the display.
The program is now heard in monographic
form, reducing the noise. To resume stereo
play, press the FM button again.
FRONT PANEL
NEXT
OPEN/CLOSE
UP
REMOTE CONTROL
REMOTE CONTROL
4.Stations in the memory function may also
be accessed by pressing the UP or DOWN
button.
3. Place the disc on the disc tray. Be sure
play side is face down on the tray.
6.Fast Forward/Reverse Playback
The unit features both fast forward and fast
reverse playback. Either mode will speed up:
2x,4x,8x,16x.
4. Press OPEN/CLOSE key to close tray.
The disc tray will close. The disc type will
appear in the upper-left-hand corner of the
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
|