Curtis Cordless Telephone TC924 User Manual

OWNER'S MANUAL  
L-D-C C-F  
CALLS BATT MSG DIR  
AM  
PM  
#
NEW  
RPT  
TOTAL  
Option  
IN USE/  
CHARGE  
POWER  
PAGE  
2.4 GHz Cordless Telephone with Call Waiting Caller ID  
PLEASE READ BEFORE OPERATING THIS EQUIPMENT  
Model : TC924  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Safety Instructions........................................................................................................... 3  
HANDSETCONTROLS................................................................................................... 5  
BASE UNIT Controls........................................................................................................7  
Getting Started..................................................................................................................8  
Belt Clip Installation..................................................................................................9  
Cordless Telephone Operation.................................................................................... 10  
Preparing for Use......................................................................................................10  
Receiving Calls..........................................................................................................10  
Placing Calls..............................................................................................................11  
Redial Feature........................................................................................................... 11  
Using the Headset Feature.....................................................................................12  
Caller ID System Operation...........................................................................................13  
Caller ID System........................................................................................................13  
Viewing Caller Information During Incoming Calls............................................ 13  
Caller ID with Call Waiting.......................................................................................14  
Message Waiting.......................................................................................................14  
One-Touch Voice Mail Dialing................................................................................. 14  
Caller List....................................................................................................................15  
Viewing the Caller List....................................................................................... 15  
Placing a Call from the Caller List................................................................... 15  
Storing Caller ID Records into the DIRECTORY (PHONE BOOK)........... 16  
Deleting a Single Record in the Caller List....................................................16  
Deleting all Records in the Caller List............................................................ 16  
Name and Telephone Number DIRECTORY (PHONE BOOK)........................17  
Viewing the DIRECTORY (PHONE BOOK)................................................... 17  
Storing Phone Numbers....................................................................................17  
Telephone Keypad Characters.........................................................................18  
Placing Calls from the DIRECTORY (PHONE BOOK)................................. 19  
Editing a Stored Number in the DIRECTORY (PHONE BOOK)................. 19  
Deleting a Stored Number in the DIRECTORY (PHONE BOOK)...............20  
Preferred Calls.................................................................................................... 20  
Blocked Calls.......................................................................................................20  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Function Settings.......................................................................................................21  
A. Setting the Ringer Level................................................................................ 22  
B. Changing the Language...............................................................................22  
C. Turning the First Ring ON or OFF................................................................23  
D. Setting the Time and Date............................................................................23  
E. Adjusting the Contrast...................................................................................24  
F. Setting the PBX Number................................................................................ 24  
G. Changing the Flash Time.............................................................................24  
H. Changing the Pause Time...........................................................................25  
I. Programming One-Touch Voice Mail Dialing..............................................25  
J. Deleting Message Waiting Indication......................................................... 26  
K. Setting the Area Code....................................................................................26  
Security System................................................................................................................27  
Recharging the BATTERY PACK...................................................................................28  
Changing the BATTERY PACK...................................................................................... 28  
Problem Solving...............................................................................................................29  
Technical Information......................................................................................................31  
FCC Requirements.........................................................................................................32  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
IMPORTANT SAFETY INSTRUCTIONS  
To reduce the risk of fire, electric shock and/or injury, always follow these  
basic safety precautions when using your cordless telephone equipment.  
1. Read and understand all instructions.  
2. Follow all warnings and instructions marked on the telephone.  
3. Do not use this telephone near a bathtub, wash bowl, kitchen sink, or laundry tub, in a  
wet basement, near a swimming pool, or anywhere else where there is water.  
4. Avoid using a telephone (other than a cordless type) during an electrical storm. There  
may be a remote risk of electric shock from lightning.  
5. Do not use the telephone to report a gas leak in the vicinity of the leak.  
6. Use only the power cord and BATTERY PACK indicated in the Owner’s Manual. Do not  
dispose of the BATTERY PACK in a fire. The BATTERY PACK may explode. Check with  
local codes for possible special disposal instructions.  
7. Operate this telephone using the electrical voltage as stated on the BASE UNIT or in the  
Owner’s Manual. If you are not sure of the voltage in your home, consult your dealer or  
local power company.  
8. Unplug this telephone from the wall outlet before cleaning or replacing the BATTERY  
PACK. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth  
for cleaning.  
9. Place this telephone on a stable surface. Serious damage and/or injury may result if the  
telephone falls.  
10. Do not cover the slots and openings on this telephone. This telephone should never be  
placed near or over a radiator or heat register. This telephone should not be placed in a  
built-in installation unless proper ventilation is provided.  
11. Do not place anything on the power cord. Install the telephone where no one will step or  
trip on the cord.  
12. Do not overload wall outlets or extension cords as this can increase the risk of fire or  
electric shock.  
13. Never push any objects through the slots in the telephone. They could touch dangerous  
voltage points or short out parts that could result in a risk of fire or electric shock. Never  
spill liquid of any kind on the telephone.  
14. To reduce the risk of electric shock, do not take this telephone apart. If service or repair  
work is required on this telephone, take it to a qualified service representative.  
Opening or removing covers may expose you to dangerous voltage or other  
risks. Incorrect reassembly can cause electric shock when the appliance is  
subsequently used.  
15. Unplug this telephone from the wall outlet and consult a qualified service  
representative in any of the following situations.  
A. When the power supply cord is frayed or damaged.  
B. If liquid has been spilled into the telephone.  
C. If the telephone has been exposed to rain or water.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
D. If the telephone does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions. Improper  
adjustment may require extensive work by a qualified technician to restore the  
telephone to normal operation.  
E. If the telephone has been dropped or the case has been damaged.  
F. If the telephone exhibits a distinct change in performance.  
16. Never install telephone wiring during a lightning storm.  
17. Never install telephone jacks in wet locations unless the jack is specifically designed for  
wet locations.  
18. Never touch uninsulated telephone wires or terminals unless the telephone line has  
been disconnected at the network interface.  
19. Use caution when installing or modifying telephone lines.  
Battery Safety  
CAUTION:  
Danger of explosion if BATTERY PACK is incorrectly replaced. Replace only  
with the same or equivalent type. To reduce the risk of fire or personal  
injury, read and follow these instructions:  
1. Use only the following type and size of BATTERY PACK:  
3.6VDC, 600mAh Rechargeable Ni-MH BATTERY PACK  
2. Do not dispose of the BATTERY PACK in a fire. It may explode. Check with local codes for  
possible special disposal instructions.  
3. Do not open or mutilate the BATTERY PACK. Released electrolyte from a BATTERY PACK  
is corrosive and may cause damage to the eyes or skin. Electrolyte may be toxic if  
swallowed.  
4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY PACK  
with conductive materials such as rings, bracelets and keys. The BATTERY PACK or  
conductor may overheat and cause burns.  
5. Charge the BATTERY PACK provided with (or identified for use with) this telephone only  
in accordance with the instructions and limitations specified in this manual.  
6. Observe proper polarity orientation between the BATTERY PACK and BATTERY  
CHARGER.  
SAVE THESE INSTRUCTIONS  
ATTENTION:  
The telephone that you have purchased contains a rechargeable BATTERY PACK. The  
BATTERY PACK is recyclable. At the end of its useful life, under various state and local  
laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste stream.  
Check with your local solid waste officials for details in your area for recycling options or  
proper disposal.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDSET Controls  
L-D-C C-F  
CALLS BATT MSG DIR  
AM  
PM  
#
NEW  
RPT  
TOTAL  
1. New Call/Msg Waiting (Message Waiting) LED Indicator: (New Call) Blinks to  
indicate that you have a new Caller ID call stored in memory. (Message Waiting) Blinks  
when receiving a Message Waiting signal, if you have subscribed to a Voice Mail  
message service from your local telephone company. (See page 14.)  
2. Large LCD Screen: Shows call information, phone status, prompts and DIRECTORY  
(PHONE BOOK) items.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDSET Controls  
3. Talk Button: Press to answer an incoming call or to place a call. Press to end a call.  
4. HANDSET Volume Control (HI, MID, LOW) Switch: Select the receiver volume level  
(HI, MID, LOW).  
5. TELEPHONE KEYPAD Buttons: Allows you to make a call depending on pressed  
button. (For TELEPHONE KEYPAD characters, see page 18.)  
6. Temporary Tone (*) Button: Press to temporarily change the DIALING mode from  
PULSE to TONE for Rotary Service Users. (Press once before entering numbers to  
access the answering system or electronic banking services, etc.)  
7. Voice Mail/Func (Function) Button: (Voice Mail) Press to automatically dial the Voice  
Mail Post Code in your area to access your Voice Mail message. (Func) Press and hold  
to access the special functions operation in STANDBY mode. (For special functions see  
pages 21~26.)  
8. Flash/Edit Button: (Flash) Press to answer a call if you have Call Waiting. (Edit) Press  
to edit listed items.  
9. Batt Low Indicator: Appears on the LCD Screen when the battery charge is low. (See  
page 28 for detail.)  
10. SCROLL UP - DOWN , SHIFT LEFT - RIGHT Button: Press to move around  
the large LCD Screen.  
11. Dir (Directory) Button: Press to access names and numbers stored in the DIRECTORY  
(PHONE BOOK). (See pages 16 to 20 for details.)  
12. HEADSET JACK: For connecting your headset plug to enjoy hands-free communication.  
(See page 12 for detail.)  
13. #/Option Button: (Option) Press to change the displayed telephone number  
into 7, 10, or 11 digit DIALING mode during Caller ID callback.  
14. Re (Redial)/Pa (Pause)/Save Button: (Redial) Press to redial the last number you  
dialed. (Pause) Press to insert a pause while dialing. (You will need the Re/Pa/Save  
button to dial numbers which use an alternative Long Distance Access Code.)  
(Save) Press and hold down to save the changes on the listed items.  
15. Scan/Del (Delete) Button: (Scan) Press to change the operating channel when you  
hear interference. (Delete) Press to delete items or individual characters.  
16. Microphone:  
17. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We  
recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASE UNIT Controls  
1. TONE/PULSE SELECT SWITCH  
2. POWER-IN CONNECTION JACK  
3. TELEPHONE LINE CONNECTION  
JACK  
4. BASE UNIT ANTENNA  
5. IN USE/CHARGE LED  
INDICATOR  
6. CHARGE TERMINALS  
7. POWER LED INDICATOR  
PAGE  
8. PAGE BUTTON  
1. TONE/PULSE Select Switch  
2. POWER-IN CONNECTION JACK  
3. TELEPHONE LINE CONNECTION JACK  
4. BASE UNIT ANTENNA  
5. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET is in  
TALK mode. (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT  
for charging.  
6. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best  
performance, clean the CHARGE TERMINALS periodically with a damp cloth.  
7. POWER LED Indicator: Lights up when power is connected to the BASE UNIT.  
8. PAGE Button: Press to page the HANDSET.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Connecting Your Phone  
This section is a reference guide to the basic functions and operations of your cordless  
telephone. For more detailed descriptions of the operations and features of this telephone,  
refer to the Contents on page 1.  
1. Carefully remove your cordless telephone from its shipping carton. If there is any visible  
damage, do not attempt to operate this equipment. Return it to the place of purchase.  
2. Check to be sure you have all items that come with this cordless telephone system. You  
should have a HANDSET, BASE UNIT, AC ADAPTOR, BATTERY PACK, TELEPHONE LINE  
CORD, BELT CLIP, HEADSET, and Owner’s Manual.  
L-D-C C-F  
CALLS BATT MSG DIR  
AM  
PM  
#
NEW  
RPT  
TOTA  
L
BELT CLIP  
BATTERY PACK  
AC ADAPTOR  
IN USE/  
CHARGE  
POWER  
PAGE  
TELEPHONE LINE CORD  
HANDSET  
BASE UNIT  
3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION  
JACK at the back of the BASE UNIT.  
4. Plug the AC ADAPTOR into a 120V AC wall outlet.  
USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 300mA.  
5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the  
other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE UNIT.  
(If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE  
JACK ADAPTOR. This adaptor is available at the same place you purchased your  
telephone.)  
6. We recommend not placing this unit next to appliances. Doing so may cause interference.  
120V WALL  
OUTLET  
TELEPHONE LINE  
CONNECTION  
JACK  
TELEPHONE  
JACK  
POWER-IN  
CONNECTION  
JACK  
T
ONE/PU  
L
SE  
9VDC 00mA  
TELINE  
TELEPHONE  
LINE CORD  
AC  
TONE/PULSE  
ADAPTOR SELECT SWITCH  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
7. Install the HANDSET BATTERY PACK by  
plugging it into the BATTERY  
CONNECTOR inside the BATTERY  
COMPARTMENT.  
8. Place the BATTERY PACK inside the  
BATTERY COMPARTMENT.  
9. Slide the HANDSET BATTERY  
COMPARTMENT COVER firmly into  
place in its closed position.  
BATTERY PACK  
10. IMPORTANT: Before initial use, charge  
the HANDSET for 12 hours. Place the  
HANDSET on the BASE UNIT with  
TELEPHONE KEYPAD face up, and  
make sure that the CHARGE LED  
indicator on the BASE UNIT lights up  
and a “beep” tone is heard.  
BATTERY  
COMPARTMENT  
COVER  
11. TONE/PULSE Select Switch:  
A. If your home is equipped with a tone dialing system, set the TONE/PULSE  
Select Switch to the TONE position.  
B. If you have a rotary dialing system, set the TONE/PULSE Select Switch  
to the PULSE position.  
C. If you are not sure which system you have, set the TONE/PULSE Select  
Switch to the TONE position. Press the Talk button on the HANDSET  
and make a call. If the call connects, leave the switch as is; otherwise set  
to the PULSE position.  
12. Set the date and time on the HANDSET. (See page 23 for details.)  
Belt Clip Installation  
BELT CLIP  
With the back of the HANDSET facing up,  
insert one side of the BELT CLIP HOOK into  
the matching slot at the top side of the  
HANDSET. Press down on the opposite side  
of the BELT CLIP until the other hook locks  
into the slot on the side of the HANDSET.  
HOOK  
CAUTION: The cordless telephone operates at a frequency that cause interference  
to nearby TVs and VCRs; the base phone should not be placed near, or on top of a  
TV or VCR. If interference is experienced, moving the cordless telephone farther  
away from the TV or VCR will often reduce or eliminate the interference.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cordless Telephone Operation  
Preparing for Use  
Before you can use your cordless telephone, you must charge the HANDSET for 12  
hours. Failure to do so will require recharging of the BATTERY PACK more often.  
1. Place the HANDSET on the BASE UNIT for 12 hours.  
2. After 12 hours, remove the HANDSET from the BASE UNIT.  
Before you can use your cordless telephone, you must charge the  
HANDSET for 12 hours. Failure to do so will require more frequent charging  
of the BATTERY PACK.  
NOTE: Depending on the frequency of use, once the HANDSET is fully charged, it  
remains functional for approximately 6 hours of continuous use and approximately  
6 days when the HANDSET is off the BASE UNIT in STANDBY mode.  
Receiving Calls  
1. When the phone rings, the LCD Screen  
will show “RING.” If you have Caller ID,  
the LCD Screen will show the Caller ID  
AM  
information after the first ring.  
2. With theHANDSET off the BASE UNIT,  
press the Talk button. Start your  
conversation. The Call Timer starts to  
count.  
3. To end your conversation, either press the Talk button or place the HANDSET  
on the BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE  
CRADLE, you activate the AUTOMATIC STANDBY feature.  
NOTE: The Call Timer will start to count once you press the Talk button.  
Minutes  
Seconds  
TALK  
02 08  
Call Timer Display  
NOTE: While the 2.4GHz frequency is inherently clearer, we suggest that you do  
not use this phone within 20 feet of a working microwave. The microwave produces  
frequencies in this range which may cause interference. This interference is  
normal for all 2.4 GHz phones and should not be considered a product defect.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cordless Telephone Operation  
Placing Calls  
1. Press the Talk button, the Call Timer  
starts to count.  
2. Wait until you hear a dial tone and then  
dial the phone number.  
3. When you have finished your call, press  
the Talk button again or place the  
HANDSET on theBASEUNIT.  
AM  
OR  
1. Dial the phone number.  
2. Press the Talk button. The number  
displayed will be dialed.  
3. When you have finished with your call,  
press the Talk button again or place  
the HANDSET on the BASEUNIT.  
Redial Feature  
1. If you get a busy tone, press the Talk  
button or place the HANDSET on the  
BASE UNIT to hang up.  
2. Later, press the Talk button again.  
3. Listen for a dial tone.  
4. Press the Re/Pa/Save button. This  
will automatically redial the last  
telephone number you called.  
5. When you have finished with your call,  
press the Talk button again or place  
the HANDSET on the BASEUNIT.  
NOTE:  
If you are too far away from the BASE UNIT, the HANDSET emits “beep” sounds  
to warn you that the background noise level is too high for proper communication  
between the HANDSET and the BASE UNIT. When you hear this sound, you  
should move closer to the BASE UNIT to reduce the noise level. Otherwise, the  
call will automatically cut off.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cordless Telephone Operation  
Using the Headset Feature  
Your telephone can utilize a headset (not included) to be connected to your  
HANDSET for you to enjoy hands-free communication.  
Insert the small plug on the end of the headset into the HEADSET JACK at the right  
side of the HANDSET. Follow the procedures discussed in “Receiving Calls” and  
“Placing Calls” to receive and place a call.  
NOTE:  
When you plug the headset plug into the HEADSET JACK it automatically mutes  
the MICROPHONE and SPEAKER of the HANDSET. Unplug the headset to return  
the HANDSET to normal use.  
Headsets are available at most retail outlets that sell telephone equipment. The  
HEADSET JACK is compatible with 2.5 mm headset plugs only.  
HEADSET  
MICROPHONE  
SPEAKER  
HEADSET PLUG (2.5mm)  
HEADSET JACK  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
Caller ID System  
This telephone automatically displays an incoming caller’s name and telephone number  
together with the date and time of the call. It records up to 80 calls and stores the data in  
Memory.  
IMPORTANT: You must subscribe to the Caller ID service from your local telephone  
company to utilize this feature.  
Viewing Caller Information During Incoming Calls  
1. When there is an incoming call, the name and the telephone number of the caller will  
automatically appear after the first ring. Press the SHIFT LEFT  
or RIGHT  
button  
to view a name or number with more than 11 characters (as indicated by the arrows  
in the top line of the display).  
OR  
OR  
Caller’s telephone number will appear if the caller’s name is  
not available.  
“UNAVAILABLE” will appear when Caller ID information is  
not available. The origin of the call does not support the  
Caller ID system (including international calls).  
OR  
“DATA ERROR” will appear when the Caller ID information  
was received incorrectly or only part of the data was  
received.  
NOTE: When an error is received, none of the data from  
this call is saved in memory.  
OR  
OR  
“PRIVATE” will appear if the caller’s name and/or telephone  
number is blocked.  
“MSG WAITING” will appear when a Voice Mail Message  
has been received and is stored by the Message Waiting  
service provided by the telephone company.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
Caller ID with Call Waiting  
When you subscribe to Call Waiting service from your local telephone company, this  
telephone will display the name and number of the second caller while you are having a  
phone conversation with the first caller.  
Second  
Caller  
When a new call comes in while you are  
talking, you will hear a notification beep from  
the HANDSET and the volume is momentarily  
muted. The new caller’s name and phone  
number, if available, appears on the display.  
MIN  
SEC  
First  
Caller  
RPT  
1. When you receive a “Call Waiting” call and you want to connect the call, press the  
Flash/Edit button and start talking with the second caller. The active call will be  
placed on hold.  
2. Press the Flash/Edit button to alternate between calls.  
3. Press the Talk button or place the HANDSET on the BASE UNIT to end the call.  
“MSG WAITING” (Message Waiting)  
The Message Waiting LED indicator will blink when there is a message for you from your  
telephone company if you have subscribed to Voice Mail message service and if you  
have requested Visual Message Indication from your local telephone company. “MSG  
WAITING” will appear on the LCD Screen in STANDBY mode. (To remove the MSG  
WAITING indicator, see page 26.)  
Note: This function requires voice mail subscription from the local telephone company.  
Furthermore, the local phone company must provide a type of voice mail signaling  
called “FSK” (Frequency Shift Key). Not all telephone companies have the visual  
message waiting feature available. Please contact your local telephone company to  
check if this is available in your area.  
One-Touch Voice Mail Dialing  
When the setting is programmed in the Functions menu (see “Programming One-Touch  
Voice Mail Dialing” on page 25) you can dial out a programmed number at the touch of a  
button. This feature is specifically designed to easily check voice mail when you have  
that service through your local telephone company.  
1. Press the Talk button to access the telephone line.  
2. Press the Voice Mail/ Func button.  
3. The phone will automatically dial the number.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
Caller List  
This phone automatically stores the last 80 calls received. It records call information such as  
caller’s name and telephone number together with the date and time of the call. The NEW  
CALL LED indicator will blink to indicate that you have a new Caller ID call stored in  
memory.  
Viewing the Caller List  
1. With the HANDSET in STANDBY mode, press the SCROLL UP  
or DOWN  
button.  
2. Any unviewed (new) calls will be displayed first. The most recent call will be  
displayed. The information on the call will be displayed with the name, number, date,  
and time that the call was received.  
RPT  
3. To scroll to the next call, press the SCROLL UP  
or DOWN  
button. Pressing the  
SCROLL DOWN button will go through the calls from the last call received to the  
first Caller ID record. Pressing the SCROLL UP  
calls from the first call received to the last.  
button will allow you to view the  
4. Press the SHIFT LEFT  
or RIGHT  
button to view a name or number with more  
than 11 characters (as indicated by the arrows in the top line of the display).  
5. Press the Dir button to return to STANDBY mode.  
Placing a Call from the Caller List  
You can place a call from the Caller List by using the Caller ID CALLBACK feature.  
1. Press the SCROLL UP  
or DOWN  
button to find the Caller ID record you wish  
to call back.  
2. Press the #/Option button to change the displayed number to 7, 10, or 11 digits. The  
first dialing option displayed is the 11  
digits for a long distance call.  
First press.  
RPT  
Press the #/Option button for the  
second time, the displayed number will  
change to 7 digits for a local call.  
Second press.  
RPT  
Press the #/Option button for the third  
time, the displayed number will change to  
Third press.  
RPT  
10 digits for a local call with area code.  
3. Press the Talk button to dial the displayed number.  
4. To end a call, either press the Talk button or place the HANDSET on the BASE UNIT.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
Storing Caller ID Records into the DIRECTORY (PHONE BOOK)  
1. Press the SCROLL UP  
or DOWN  
button to find the record you wish to  
store into the DIRECTORY (PHONE BOOK).  
2. Press and hold the Re/Pa/Save button.  
3. The display will show “SAVED.”  
4. If you wish to edit the newly stored number, edit it in the DIRECTORY  
(PHONE BOOK) (page 19, “Editing a Stored Number”).  
5. Press the Dir button to return to STANDBY mode.  
Note: When numbers are stored into the DIRECTORY (PHONE BOOK), a “1” is  
inserted in front of the number. If you must dial a 10-digit number for local calls, you  
must edit the number to exclude that digit to dial out correctly.  
Deleting Caller ID Records  
When viewing the Caller ID information you can delete a single call record or all of the  
call records.  
Deleting a Single Record  
1. Press the SCROLL UP  
or DOWN  
button to find the record you wish to  
delete.  
2. Press the Scan/Del button. The LCD Screen will display “ERASE ITEM?”  
3. To delete the record, press the Scan/Del button again. The LCD Screen will  
show “ERASED.”  
4. Press the Dir button to exit the Caller ID list.  
Deleting All Records  
1. Press the SCROLL UP  
or DOWN  
button.  
2. Press and hold the Scan/Del button. The LCD Screen will prompt “ERASE ALL?”  
3. To delete all of the Caller ID records, press the Scan/Del button. The LCD  
Screen will show “ALL ERASED” and then return to STANDBY mode.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
Name and Telephone Number DIRECTORY (PHONE BOOK)  
This DIRECTORY (PHONE BOOK) lets you scroll through the list to find the person you need  
for one touch dialing. You can store up to 40 names and telephone numbers in the Memory.  
Viewing the DIRECTORY (PHONE BOOK)  
1. Press the Dir button.  
2. PresstheTELEPHONEKEYPAD 2/ABC to 9/WXYZ  
button that corresponds tothe first letter of a Caller’s  
name (a triple “beep” will sound if no entries are  
stored under those letters). Press the SCROLL  
AM  
TOTAL  
UP  
wish to view.  
3. Press the SHIFT LEFT or RIGHT  
or DOWN  
button to find the record you  
button to  
view a name or number with more than 11  
characters (as indicated by the arrows in the top  
line of the display).  
4. Press the Dir button to exit the DIRECTORY  
(PHONE BOOK).  
Storing Phone Numbers  
1. With the HANDSET in STANDBY mode, press the Dir button.  
2. Press the Flash/Edit button to create a new DIRECTORY (PHONE BOOK) entry.  
3. Enter the name you wish to store using the TELEPHONE KEYPAD 2/ABC to 9/WXYZ  
buttons to enter the name, (see page 18 for detail) you can store up to 18 letters. To  
move the cursor to the right, create a space or to enter a new letter, press the SHIFT  
RIGHT  
button.  
4. Press the SCROLL DOWN  
button, and dial the telephone number you wish to store  
using the TELEPHONE KEYPAD 1 to 0 buttons. You can store up to 22 digits. Briefly  
press the Re/Pa/Save button to insert a pause into the number.  
5. Press and hold the Re/Pa/Save button to store the number into memory.  
NOTES:  
1. If there are no memory locations left in the speed dial DIRECTORY (PHONEBOOK)  
the LCD Screen will display “MEMORY FULL.” To continue with memory  
programming, you must delete or edit existing speed dial numbers.  
2. If you mis-type entering the phone number, you can move through the number and  
edit it by pressing the SHIFT RIGHT  
or LEFT  
button. To delete a character  
or number inside the cursor, press the Scan/Del button.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
Telephone Keypad Characters  
The TELEPHONE KEYPAD buttons are used to enter characters when entering names  
and numbers. Press the appropriate TELEPHONE KEYPAD button to get the following  
characters. You can store a maximum of 18 characters on the letter icon and a maximum  
of 22 digits on the number icon.  
Keypad  
Buttons  
1st  
2nd  
3rd  
4th  
5th  
6th  
7th  
8th  
9th  
Press Press Press Press Press Press Press Press Press  
1
2
3
4
5
6
7
8
9
0
Space 1  
&
C
F
I
(
)
.
Space 1  
A
D
G
J
B
E
H
K
N
Q
U
X
0
a
d
g
j
b
e
h
k
n
p
u
w
0
c
f
2
3
4
5
6
r
A
D
G
J
B
E
H
K
N
7
i
L
l
M
P
T
O
R
V
Y
0
m
S
t
o
q
v
x
0
M
s
8
y
0
T
z
U
9
W
0
Z
0
0
0
*
*
*
*
*
*
*
*
*
*
#
#
#
#
#
#
#
#
#
#
EXAMPLE:  
If you want to enter the name “CLEO” with telephone number “6466867,” dial this  
sequence:  
1. Press the Dir button.  
2. Press the Flash/Edit button to create a new DIRECTORY (PHONE BOOK) entry.  
3. Press the following TELEPHONE KEYPAD buttons to get the desired letters:  
TELEPHONE KEYPAD BUTTON 222  
555  
L
33  
E
666  
O
LETTER  
C
4. Press the SCROLL DOWN  
button to move the cursor to the number icon.  
5. Press the TELEPHONE KEYPAD 0 to 9 buttons to get the desired numbers.  
6. Press and hold the Re/Pa/Save button to store the data in the DIRECTORY  
(PHONE BOOK) memory.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
Placing Calls from the DIRECTORY (PHONE BOOK)  
1. Press the Dir button.  
2. Press the SCROLL UP  
or DOWN  
button to find the record you want to call.  
OR  
Press a TELEPHONE KEYPAD (2/ABC to 9/WXYZ) that corresponds to the first letter  
of a Caller’s name. Press the SCROLL UP  
you wish to call.  
or DOWN  
button to find the record  
3. Press the Talk button to dial the displayed number.  
4. To end the call, either press the Talk button or place the HANDSET on the BASE  
UNIT.  
Editing a Stored Number in the DIRECTORY (PHONE BOOK)  
1. Press the Dir button.  
2. Press the SCROLL UP  
or DOWN  
button to find the record you wish to edit.  
3. Press the Flash/Edit button. The entry will display with a flashing prompt  
over the first character.  
TOTAL  
4. Move the cursor to the letter or number you wish to edit by pressing the SCROLL UP  
or DOWN  
, SHIFT RIGHT  
or LEFT  
button.  
To erase a character or digit, press the Scan/Del button.  
To add a letter or number, use the TELEPHONE KEYPAD 1 to 0 buttons. Characters  
or numbers will be inserted in front of the cursor (See page 18 for details.)  
5. When the entry is edited as you desire, press and hold the Re/Pa/Save  
button to store the edited record.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
Deleting a Stored Number in the DIRECTORY (PHONE BOOK)  
1. Press the Dir button.  
2. Press the SCROLL UP  
or DOWN  
button to find the record you wish to  
delete.  
3. Press the Scan/Del button. The LCD screen will display “ERASE ITEM?”  
4. To delete the record, press the Scan/Del button again.  
5. Press the Dir button to return to STANDBY mode.  
PREFERRED CALLS  
You can assign stored numbers a PREFERRED CALL status. When an  
incoming call is matched to a stored number designated as preferred, the  
phone will generate a special ringer sound after the Caller ID information is  
received.  
When you are saving the name and  
number into the DIRECTORY (PHONE  
BOOK), add a “#” symbol at the  
TOTAL  
beginning of the name by pressing the  
#/Option button.  
BLOCKED CALLS  
You can assign stored numbers a BLOCKED CALL status. When an incoming  
call is matched to a stored number designated as blocked, the phone will not  
ring after the Caller ID information is received.  
When you are saving the name and  
number into the DIRECTORY (PHONE  
BOOK), add an “*” symbol at the  
beginning of the name by pressing the  
TOTAL  
* button.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
Function Settings  
You can change the setting on the HANDSET in the functions menu. Access the functions  
menu by pressing and holding the Voice Mail/Func button.  
There are 11 settings in the functions menu which can be changed. You can scroll through  
the function menu in the listed order by pressing the SCROLL DOWN  
button.  
Settings can be accessed by pressing the corresponding TELEPHONE KEYPADbutton. To edit  
a setting, press the Flash/Edit button, use the SCROLL UP or DOWN button to toggle  
between the setting options, and then press and hold the Re/Pa/Save button to save the  
changes. Press the Voice Mail/Func button to exit the functions menu.  
TELEPHONE Function  
KEYPAD  
1
Ring Hi/Low/Off: Changes the volume of the ringer on the HANDSET  
or turn the ringer OFF.  
2
3
Language: Changes the language that appears on the LCD Screen.  
Choose between English, French, or Spanish.  
First Ring On/Off: Turns the first ring of the phone OFF so that it does  
not ring until Caller ID information has been displayed. Particularly useful  
when using the PREFERRED and BLOCKED CALL features or the  
PRIVATE and UNAVAILABLE ring settings.  
4
5
Time Set: Changes the time and date.  
Contrast: Adjusts the brightness of the LCD Screen for optimum  
viewing.  
6
PBX Number: Inserts if a “PBX Number” before an outgoing number is  
dialed. Select the number (0-9) which is required to access an outside  
line when using a switchboard system, and the phone will auto-  
matically dial the PBX number and a pause before any speed dial or  
Caller ID callback number. Factory setting is “OFF.”  
Flash Time: Changes the flash time to accommodate the phone  
service in your area.  
7
8
Pause Time: Changes the number of seconds that a pause lasts  
when using programmed pauses in your speed dial numbers or  
after your PBX number.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
TELEPHONE  
KEYPAD  
Function  
9
Voice Mail: Programs the one-touch number that enables easy access  
to the voice mail service provided by your telephone company.  
0
MSG Waiting Delete: Clears current message waiting indication.  
Area Code: Allows the programming of a home Area Code where  
7-digit dialing is used for ease of callback and other features (do not  
program if you use 10-digit dialing to call numbers in your area).  
*
NOTE: At any time during options programming you can quit and the settings that  
you have changed will be saved. Press the Voice Mail/Func button to quit the  
options menu or let the options programming time out by not pressing any  
TELEPHONE KEYPAD buttons for 20 seconds.  
A. Setting the Ringer Level  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the Flash/Edit button to change the setting. “HI” will begin flashing.  
3. Press the SCROLL UP  
or DOWN  
button to toggle between HI, LOW, and OFF..  
4. When the desired setting is displayed, press and hold the Re/Pa/Save button to  
save the setting. A long “beep” will sound to confirm the setting has been saved.  
5. Continue with programming or press the Voice Mail/Func button to return to  
STANDBY mode.  
B. Changing the Language  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the 2 button to go to the LANGUAGE programming option.  
3. Press the Flash/Edit button to change the setting. “ENGLISH” will begin flashing.  
4. Press the SCROLL UP  
or DOWN  
button to toggle between ENGLISH, ESPANOL,  
and FRANCAIS.  
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save  
the setting. A long “beep” will sound to confirm the setting has been saved.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
6. Continue with programming or press the Voice Mail/Func button to return to  
STANDBY mode.  
C. Turning the FIRST RING ON or OFF  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the 3 button to go to the FIRST RING programming option.  
3. Press the Flash/Edit button to change the setting. “On” will begin flashing.  
4. Press the SCROLL UP  
or DOWN  
button to toggle between ON and OFF..  
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to  
save the setting. A long “beep” will sound to confirm the setting has been saved.  
6. Continue with programming or press the Voice Mail/Func button to return to  
STANDBY mode.  
D. Setting the Time and Date  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the 4 button to go to the TIME set programming option.  
3. Press the Flash/Edit button to change the setting. The month will begin flashing.  
4. Press the TELEPHONE KEYPAD 1 to 0 button to enter the month. The date will begin  
flashing.  
5. Press the TELEPHONE KEYPAD 1 to 0 button to enter the date. The hour will begin  
flashing.  
6. Press the TELEPHONE KEYPAD 1 to 0 button to enter the hour. The minutes will  
begin flashing.  
7. Press the TELEPHONE KEYPAD 1 to 0 button to enter the minutes. “AM” and “PM” will  
begin flashing.  
8. Press the TELEPHONE KEYPAD 1 button to choose AM or press the 2 button to  
choose PM.  
9. When the desired setting is displayed, press and hold the Re/Pa/Save button to  
save the setting. A long “beep” will sound to confirm the setting has been saved.  
10. Continue with programming or press the Voice Mail/Func button to return to  
STANDBY mode.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
E. Adjusting the Contrast  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the 5 button to go to the CONTRAST programming option.  
3. Press the Flash/Edit button to change the setting. “4” will begin flashing.  
4. Press the SCROLL UP  
or DOWN  
button to toggle from 1 to 8 levels of contrast.  
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save  
the setting. A long “beep” will sound to confirm the setting has been saved.  
6. Continue with programming or press the Voice Mail/Func button to return to  
STANDBY mode.  
F. Setting the PBX Number  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the 6 button to go to the PBX NUMBER programming option.  
3. Press the Flash/Edit button to change the setting. “OFF” will begin flashing.  
4. Press the SCROLL UP  
or DOWN  
button to customize the digit to match your  
PBX system. When not connected to a PBX, the phone will only function normally  
when set to “OFF.”  
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save  
the setting. A long “beep” will sound to confirm the setting has been saved.  
6. Continue with programming or press the Voice Mail/Func button to return to  
STANDBY mode.  
G. Changing the Flash Time  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the 7 button to go to the FLASH TIME programming option.  
3. Press the Flash/Edit button to change the setting. “600” will begin flashing.  
4. Press the SCROLL UP  
or DOWN  
button to select the desired FLASH TIME.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to  
save the setting. A long “beep” will sound to confirm the setting has been saved.  
6. Continue with programming or press the Voice Mail/Func button to return to  
STANDBY mode.  
NOTE: The standard and default flash time setting is 600 msec. This is the setting you  
should use to access standard telephone services such as call waiting. This setting  
is adjustable to allow for PBX and other special uses.  
H. Changing the Pause Time  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the 8 button to go to the PAUSE TIME programming option.  
3. Press the Flash/Edit button to change the setting. “4” will begin flashing.  
4. Press the SCROLL UP  
or DOWN  
button to select the desired time delay.  
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to  
save the setting. A long “beep” will sound to confirm the setting has been saved.  
6. Continue with programming or press the Voice Mail/Func button to return to  
STANDBY mode.  
I. Programming One-Touch Voice Mail Dialing  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the 9 button to go to the VOICE MAIL programming option.  
3. Press the Flash/Edit button to enter the voice mail speed dial number.  
4. Press the TELEPHONE KEYPAD 1 to 0 buttons to enter the phone number used to  
access your voice mail messages (up to 15 digits).  
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to  
save the setting. A long “beep” will sound to confirm the setting has been saved.  
6. Continue with programming or press the Voice Mail/Func button to return to  
STANDBY mode.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID System Operation  
J. Deleting Message Waiting Indication  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the 0 button to go to the MESSAGE WAITING programming option.  
3. Press the Flash/Edit button to reset the Message Waiting Indication.  
“DEL” will begin flashing.  
4. Press and hold the Re/Pa/Save button to delete the indication. A long  
“beep” will sound to confirm the setting has been saved.  
5. Continue with programming or press the Voice Mail/Func button to return  
to STANDBY mode.  
K. Setting the Area Code  
1. Press and hold the Voice Mail/Func button to enter the menu.  
2. Press the  
*
button to go to the AREA CODE programming option.  
3. Press the Flash/Edit button to change the setting. “000” will begin  
flashing.  
4. Press the TELEPHONE KEYPAD 1 to 0 buttons to enter the three digit area  
code for your phone number.  
5. When the desired setting is displayed, press and hold the Re/Pa/Save  
button to save the setting. A long “beep” will sound to confirm the setting has  
been saved.  
6. Press the Voice Mail/Func button to return to STANDBY mode.  
NOTE:  
Do not use the AREA CODE programming if you are required to dial 10 digits  
(XXX-XXX-XXXX) to dial a local number.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Security System  
Security System  
Your cordless telephone uses a digital coding security system to prevent  
unauthorized use of your telephone line by another nearby cordless telephone.  
The system has its own identifying signal created by microcomputers in both the  
BASE UNIT and theHANDSET.  
Security Code  
This telephone has an internal security code with 65,536 possible combinations.  
Resetting Security Code and Channel Information  
Communication between the HANDSET and the BASE UNIT may not be possible in  
any of the following situations:  
1. After a power failure.  
2. After relocating the BASE UNIT by disconnecting the AC ADAPTOR.  
3. After replacing the HANDSET BATTERY PACK.  
To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds.  
Multi-Channel Access  
Your cordless telephone lets you select a channel from the 50 frequencies  
available to transmit signals between the BASE UNIT and the HANDSET. When you  
notice interference from other cordless telephones, change to another channel by  
pressing the Scan/Del button on the HANDSET.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recharging the BATTERYPACK  
Recharging the BATTERY PACK  
The nickel metal hydride (Ni-MH) BATTERY PACK in the HANDSET can be  
recharged many times using the built-in charger in the BASE UNIT.  
When the BATT LOW symbol appears on the LCD Screen, a “beep” sound will be  
heard every 12 seconds. This indicates that the BATTERY PACK needs to be  
recharged.  
Charge the BATTERY PACK at least once every 90 days of non-use to avoid battery  
failure. When the BATTERY PACK can no longer be charged, replacement of the  
BATTERY PACK will be necessary.  
NOTES:  
1. During a power interruption, the BASE UNIT does not operate, and a  
phone conversation cannot be made on the HANDSET.  
2. To ensure your phone charges properly, place the HANDSET on the  
BASE UNIT with TELEPHONE KEYPAD face up, and make sure that the  
CHARGE LED indicator on the BASE UNIT lights up and a “beep”  
confirmation tone is heard.  
Changing the BATTERY PACK  
The BATTERY PACK provides power for the HANDSET of your cordless telephone.  
To Replace the BATTERY PACK:  
1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down.  
2. Pull out the BATTERY PACK PLUG and remove the BATTERY PACK.  
3. Plug the new BATTERY PACK into the BATTERY CONNECTOR.  
4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in  
its closed position.  
5. Before use, charge the new BATTERY PACK for 12 hours.  
ATTENTION:  
The telephone that you have purchased contains a rechargeable BATTERY  
PACK. The BATTERY PACK is recyclable. At the end of its useful life, under  
various state and local laws, it may be illegal to dispose of this BATTERY  
PACK into the municipal waste stream. Check with your local solid waste  
officials for details in your area for recycling options or proper disposal.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem Solving  
Problem Solving Section  
For your assistance, we have listed below a few common problems.  
Phone does not work, check the following:  
1. BASE UNIT is plugged into a power source.  
2. HANDSET is charged.  
3. TONE/PULSE Select Switch is in the right position.  
4. TELEPHONE LINE CORD is plugged into the TELEPHONE JACK.  
Range of phone limited, check the following:  
1. BASE UNIT is centrally located in your residence.  
2. BASE UNIT is not located near appliances.  
No dial tone, check the following:  
1. TELEPHONE LINE CORD plugs are connected to the TELEPHONE JACK and  
TELEPHONE LINE CONNECTION JACK.  
2. BASE UNIT is plugged into a power source.  
3. If you had a power failure or had unplugged the BASE UNIT, replace the  
HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.  
Received signal flutters or fades, check the following:  
1. BATTERY PACK in the HANDSET is fully charged.  
2. HANDSET is not too far from the BASE UNIT.  
Interference on reception, check the following:  
1. Noise may be picked up from electrical products in the home or electrical  
storms. Generally, this noise is a minor annoyance and should not be  
interpreted as a defect in your system. (See Technical Information on page 31).  
2. Choose an alternate channel using the Scan/Del button on the HANDSET.  
3. Do not use this telephone within 20 ft. of a microwave oven while it is working,  
as you may experience interference. This is a normal occurrence with 2.4 GHz  
phones and should not be interpreted as a defect in the product.  
Excess static, check the following:  
1. Check to see that the ANTENNA is not touching another metal object.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem Solving  
If after pressing the Talk button, you receive three “beeps” and no dial tone, check  
the following:  
1. BASE UNIT is plugged into a power source.  
2. If you had a power failure or had unplugged the BASE UNIT, replace the  
HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.  
NOTE:  
If none of the telephones in the house are working, disconnect one set at a time to  
verify that none of the phones are causing the problem. If you still have a problem  
after doing this, and your telephone still does not work, please contact your local  
phone company.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TechnicalInformation  
Technical Information  
This cordless telephone uses radio frequencies to allow mobility. There are  
certain difficulties in using radio frequencies with a cordless telephone. While  
these are normal, the following could affect the operation of your system.  
Noise  
Electrical pulse noise is present in most homes at one time or another. This noise  
is most intense during electrical storms. Certain kinds of electrical equipment  
such as light dimmers, fluorescent bulbs, motors, and fans also generate noise  
pulses. Because radio frequencies are susceptible to these noise pulses, you  
may occasionally hear them in your HANDSET. Generally they are a minor  
annoyance and should not be interpreted as a defect in your system.  
Range  
Because radio frequency is used, the location of the BASE UNIT can affect the  
operating range. Try several locations in your home or office and pick the one that  
gives you the clearest signal to the HANDSET.  
Interference  
Electronic circuits activate a relay to connect the cordless telephone to your  
telephone line. These electronic circuits operate in the radio frequency spectrum.  
While several protection circuits are used to prevent unwanted signals, there may  
be periods when these unwanted signals enter the BASE UNIT. You may hear  
clicks or hear the relay activate while you are not using the HANDSET. If the  
interference occurs frequently, it can be minimized or eliminated by relocating the  
BASE UNIT. You can check for interference before selecting the final BASE UNIT  
location by plugging in the telephone.  
NOTICE:  
This cordless telephone uses radio communication between the HANDSET and  
the BASE UNIT and may not ensure privacy of communication. Other devices,  
including other cordless telephones, may interfere with the operation of this cordless  
telephone or cause noise during operation. Units not containing coded access  
may be accessed by other radio communication systems. Cordless telephones  
must not cause interference to any licensed radio service.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCCRequirements  
FCC NOTICE  
The FCC requires that you be advised of certain requirements involving the use of  
this telephone.  
1. This telephone is hearing aid compatible.  
2. This equipment complies with Part 68 of the FCC Rules. A label on the  
BASE UNIT of this equipment contains, among other information, the ACTA  
Product Number and the Ringer Equivalence Number (REN) for this  
equipment. You must, upon request, provide this information to your  
telephone company.  
3. The REN is also useful in determining the quantity of devices that you  
may connect to your telephone line and still allow these devices to ring  
when your telephone number is called. In most areas, but not all, the sum  
of the RENs for all devices connected to one line should not exceed five  
(5.0). To be certain of the number of devices that you may connect to your  
line, you should contact your local telephone company.  
4. If your telephone causes harm to the telephone network, the telephone  
company may temporarily disconnect your service. If possible, they will  
notify you in advance that temporary discontinuance of service may be  
required. However, when advanced written notice is not possible, the  
telephone company may temporarily discontinue service without notice if  
such action is necessary under the circumstances.  
5. The telephone company may make changes in its communication  
facilities, equipment, operations, or procedures that could affect the proper  
operation of your equipment. If they do, you will be provided with advance  
notice as to give you an opportunity to maintain uninterrupted service.  
6. This equipment may not be used on coin service provided by the telephone  
company. Connection to party lines is subject to state tariffs. (Contact your  
state public Utility Commission or Corporation Commission for  
information.  
7. An FCC compliant telephone cord and modular plug is provided with this  
equipment. This equipment is designed to be connected to the telephone  
network or premises wiring using a compatible modular jack which is Part  
68 compliant. See Installation Instructions for details.  
8. Please follow instructions for repairing, if repairing any (e.g. battery  
replacement section), otherwise do not alter or repair any parts or device  
except specified.  
9. The USOC number of the registration jack for this equipment is RJ11C.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCCRequirements  
RINGER EQUIVALENCE NUMBER  
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device  
provides an indication of the maximum number of terminals allowed to be  
connected to a telephone interface. The termination on an interface may consist of  
any combination of devices subject only to the requirement that the sum of the  
ringer equivalence numbers af all devices does not exceed 5.  
CAUTION:  
Users should not attempt to make such connections themselves, but should  
contact the appropriate electric inspection authority, or electrician, as appropriate.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Coleman Tent 2000008916 User Manual
Cooper Lighting Indoor Furnishings Atlantis 1407 User Manual
Craftsman Air Compressor 919722020 User Manual
Craftsman Trimmer 358745511 User Manual
Creative Car Speaker DTT 3500 User Manual
EverFocus Computer Monitor EN 200 User Manual
Extron electronic Stereo Amplifier PA 300 User Manual
Frigidaire Cooktop 318068129 User Manual
GE Monogram Refrigerator ZFSB23DXSS User Manual
Glen Dimplex Home Appliances Ltd Oven BI 70 90 FP User Manual