Recipe
Booklet
Reverse Side
INSTRUCTION BOOKLET
®
Cuisinart®
Blender
SMO-56
Smooth Operator
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
E IB-5999A
Download from Www.Somanuals.com. All Manuals Search And Download.
UNPACKING INSTRUCTIONS
FEATURES AND BENEFITS
1. Place the gift box containing your Cuisinart® Smooth Operator®
Blender on a flat, sturdy surface before unpacking.
1. 2-oz. Measured Pour Lid: Allows
you to measure and add ingredi-
ents without removing the cover.
1.
2.
2. Remove instruction book and other printed materials from top of
corrugated insert.
3. Remove corrugated insert containing dispenser tap, dispenser plug,
blending stick and measured pour lid.
4. Lift blender base from box.
5. Carefully lift out corrugated insert containing the glass blender
jar assembly.
2. Cover: Easy press-on cover with
tightfitting seal resists leakage.
3.
3. 56-oz. Glass Jar with Handle:
Large capacity is great for any size
crowd.
4. Blending Stick (not shown):
Helps move ingredients when
preparing a thick mixture.
To assemble the blender, follow the Assembly Instructions in this booklet.
Replace all corrugated inserts in the box and save the box for repackaging.
Before using for the first time: Wash all parts according to the Cleaning and
Maintenance section in this booklet to remove any dust or residue.
5. High-quality Cutting Assembly
with Patented Stainless Steel
Blades (not shown): Strong
enough for all blending tasks,
including ice crushing.
6. Removable Dispenser Tap:
Allows you to dispense drinks with
ease.
6.
CONTENTS
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Helpful Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Easy Reference Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Dos and Don’ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8b.
8a.
7. Dispenser Tap Plug
(not shown): When dispensing is
not desired, you can remove the
dispenser tap and replace it with
the plug. This allows you to use
your blender for standard blender
tasks.
9.
10.
Note: Blades are sharp...
handle carefully.
8. Push-button Controls:
a. High and Low Buttons: Choose High or Low speed to blend the
ingredients to the desired consistency. Red LED lights will indicate
which speed you are using.
b. Pulse Button: Allows you to pulse at High to Low speeds, so you
INTRODUCTION
can blend ingredients only as much as needed.
You don’t even have to lift the blender jar off of the Cuisinart® Smooth
Operator® to pour! A great party blender, it holds 56 ounces and has a
self-serve dispenser tap right on the front. Your guests can help themselves
to frozen drinks or smoothies, so you can enjoy the party, too! When blend-
ing chunky dips, batter for crêpes, or hearty protein shakes, simply replace
the dispenser tap with the plug and pour from the jar. You’ll find the 5-but-
ton control panel simple to use, and the styling so dynamic you’ll want to
leave your Smooth Operator® out on the counter for all to see!
9. Heavy-duty Motor Base: It is so sturdy and stable, it will not “walk”
on your counter.
10. Slip-proof Feet: Prevent movement during use and damaging marks
on counter tops or tables.
11. Cord Storage: (not shown) Keeps countertops safe and neat,
conveniently storing excess cord.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
• Do not twist locking ring from blender jar when removing blender jar from
base. Simply lift blender jar from motor base.
USE AND CARE
• Boiling liquid or solid frozen foods (with the exception of ice cubes or
ASSEMBLY
1
⁄
2
inch [1.3 cm] pieces of frozen fruit) should never be placed in the
To use your Cuisinart® Smooth Operator® Blender, begin by assembling the
blender jar.
blender jar.
• Do not place ice, frozen foods or very cold liquids into a blender jar
which has come directly from a hot dishwasher.
1. Turn the blender jar (a) upside down, and place it flat on a sturdy
surface.
• Do not place very hot liquids or foods into a blender jar which has come
directly from the freezer. Boiling liquids should cool for 5 minutes before
being placed in blender jar.
2. Position the rubber gasket (b) on the round opening on the bottom of the
blender jar.
3. Turn the locking ring with cutting
assembly (c) upside down, and
place the blade end in the blender
• Follow Cleaning and Maintenance instructions in this booklet prior to your
first use.
(c)
jar opening. Engage threads by twist-
ing the locking ring clockwise until
tightened. Make sure locking ring is
tightly fastened to blender jar. Once
assembled, turn the blender jar
right-side up.
OPERATION
1. Place the motor base of your Cuisinart® Smooth Operator® Blender on
a flat, sturdy surface. It is important that the surface be clean and dry.
Assemble the blender by following the assembly instructions. Once the
jar is assembled and is in position on the motor base, plug the Cuisinart®
Smooth Operator® Blender into an electrical outlet.
(b)
(a)
Note: Blades are sharp…
handle carefully.
2. Add all necessary ingredients to the blender jar, and replace the cover.
You may use the blending stick or measured pour lid when blending. The
blending stick helps to keep frozen ingredients moving without having to
remove the lid. You may add more ingredients by lifting the measured
pour lid or blending stick and dropping ingredients through the fill area.
Replace the measured pour lid or blending stick after adding ingredients.
Do not place hands into blender jar with blender plugged in.
4.
Push the cover onto the top of the
blender jar. Twist the measured
pour lid into the cover, or place the
blending stick into the cover.
5. Place the blender jar on the motor base so that the handle is positioned
to the back of the blender.
6. Screw the dispenser tap or dispenser plug onto the front of the locking
ring.
Note: Add liquid ingredients first, then follow with solid ingredients. This
will provide more consistent blending and prevent unnecessary stress on
the motor.
7. Plug in power cord. Your blender is now ready to be used.
Note: To remove blender jar cover, lift edge of
cover upwards. Lifting measured pour lid will not
remove cover.
HELPFUL REMINDERS
3. START BLENDING: Press the ON button.
The red LED indicator light will illuminate,
indicating that the blender is turned on but
no speed has been selected.
• Once the cover is in position, additional ingredients can be added during
blending by simply lifting the measured pour lid, adding ingredients, and
replacing the measured pour lid.
• Cover should always be in place while the unit is on.
4. CHOOSE BLENDING SPEED: Press HIGH
or LOW button to determine the speed at
• Warning: Do not place blender jar onto base while motor is running.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
which you would like to blend the ingredients. Both the On indicator light
and the activated speed indicator light will glow. The blender will now be
functioning at the desired speed. It is possible to switch speeds without
pressing the OFF button, by simply pushing the other speed button.
QUICK REFERENCE GUIDE
To activate blender
Press ON – The blender is in ON mode.
Press desired speed button.
To begin blending
To change speeds
To pulse
Press desired speed button.
5. TO PAUSE OR STOP BLENDING PROCESS
In ON mode press PULSE, then press and release
desired speed button as needed.
a. To Pause Blending Process: Push the button corresponding to
the speed at which you are currently blending. For example: If you
are blending on HIGH speed, push the HIGH speed button and the
blender will stop blending, but the unit will remain on.
To stop blending
Press OFF button.
(and deactivate blender)
To stop blending
Press HIGH or LOW button.
(in high or low speeds)
b. To Stop Blending Process: Push the OFF button when you are
finished with your recipe and would like to turn the blender off.
To stop blending
(in PULSE mode)
Release button.
6. PULSE MODE: The pulse mode allows you to create a burst of power
for quick, efficient blending. To use the pulse function, push the ON
button and the red LED indicator light will illuminate. Push the PULSE
button, and the pulse LED indicator light will blink. Push and release the
desired speed button. Repeat as desired. You determine the duration of
each pulse. While pulsing, the LED indicator light will glow. The pulse
function can be used to break apart larger pieces of food or to control
the texture of food when chopping. The pulse function is also effective
in starting the blending process when you do not want continuous power,
or when processing items that do not require an extended amount
of blending.
SPEED SELECTION GUIDE
Refer to this guide to choose the best speed for your desired result.
Ingredient/Recipe
Speed
Result
Reconstituting frozen
juice concentrate
Low
Smooth and full-bodied
Mayonnaise
Low
Thick and creamy
Salad dressings
Low or High
Completely blended
and emulsified
Nuts (shelled,
Low
Pulse to chop
Coarse to fine
7. To dislodge food: Use a rubber or plastic spatula to help remove food
lodged around the cutting assembly. Do not use spatula until you have
turned the blender off. Replace the cover and measured pour lid and
continue blending, if necessary. Make sure spatula is not inside the
blender jar before blending.
1
⁄2
cup or less at a time)
Heavy or whipping cream
Low – pulse
Thick creamy topping
Bread, cookies or crackers
(add 1⁄2" pieces, 1 cup or
less at a time)
Low – pulse,
then blend
Coarse to fine as desired
8. Using dispenser tap: Place cup or pitcher under the dispenser spout.
Turn blender on and then press LOW – pull down the dispenser tap and
stir contents with blending stick as ingredients are dispensing. If there is
difficulty with dispensing, try dispensing on HIGH.
Grating/chopping citrus
zest (add 1 to 2 tsp. sugar
or salt from recipe)
Low – pulse/blend
Uniformly fine
Smoothies, shakes,
health drinks
High
High
Smooth, creamy and thick
Smooth and creamy
Note: It is highly recommended NOT to dispense hot ingredients through
the dispenser tap.
Baby food/fruit and
vegetable purée
9. WHEN FINISHED BLENDING: Press the OFF button and unplug the
blender from the electrical outlet. Never remove the blender jar from the
motor base until the blender is off. Do not twist locking ring from blender
jar when removing jar from motor base. Simply lift blender jar from motor
base. Do not place hands into blender jar with blender plugged in.
Frozen cocktails
Hard cheeses
Spices
High
Thick and slushy
Coarse to fine
Coarse to fine
Low-pulse, then blend
Low or high pulse,
then blend
Ice
High,
Coarse crush to snowy
pulse or continuous
Download from Www.Somanuals.com. All Manuals Search And Download.
5
CLEANING AND MAINTENANCE
Always unplug your Cuisinart® Smooth Operator® Blender from the electrical
outlet before cleaning. The blender is made of corrosion-resistant parts
which are easy to clean. Before first use and after every use, clean each
part thoroughly. Periodically check all parts before reassembly. If any part is
damaged or blender jar is chipped or cracked, DO NOT USE BLENDER.
Dispenser Lever
Remove the blender jar from the motor base by lifting straight up and away.
Twist off the locking ring with cutting assembly by turning counterclockwise.
Cap
Remove the rubber gasket. Wash in warm soapy water, rinse, and
dry thoroughly.
Stopper Pin
Place the locking ring in the upper rack of the dishwasher or wash in warm
water. Disassemble dispenser tap from locking ring (see diagram and
instructions at right).
CAUTION: Handle the locking ring with cutting assembly carefully. It is
SHARP and may cause injury. Do not attempt to remove blades from
locking ring.
Stopper
Remove the blender jar cover and the measured pour lid or blending stick.
Wash in warm, soapy water; rinse and dry thoroughly, or place in upper
rack of dishwasher. The blender jar must be washed in warm, soapy water
and rinsed and dried thoroughly. The blender jar can also be placed upside
down in the dishwasher, and the dispenser tap and the plug can be washed
in the top rack of the dishwasher.
Dispenser Body
Finally, wipe the motor base clean with a damp cloth to remove any
residue, and dry thoroughly. Never submerge the motor base in water or
other liquid, or place in a dishwasher.
CLEANING DISPENSER TAP
To disassemble dispenser tap for cleaning:
Tip: You may wish to clean your blender cutting assembly as follows: Squirt
a small amount of dishwashing liquid into assembled blender jar and fill
halfway with warm water. Run on LOW for 15 seconds. Repeat, using clean
tap water. Empty blender jar and carefully disassemble parts. Wash locking
ring with cutting assembly and gasket in warm, soapy water. Rinse and dry
all parts thoroughly.
1. Remove the dispenser tap from the locking ring by unscrewing the entire
dispenser tap counterclockwise.
2. Remove the cap from the dispenser body by unscrewing it
counterclockwise.
3. Squeeze cap and stopper together and slide the lever off the stopper pin.
4. Remove the cap from stopper and stopper pin. The stopper, pin and
spring are tightly fitted. Do not separate.
5. Clean all parts in warm soapy water, dry thoroughly and reassemble in
the order shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DOS AND DON’TS WHEN USING
YOUR BLENDER
DON’T:
• Don’t store food or liquids in your blender jar.
• Don’t place locking ring with cutting assembly onto motor base without
the blender jar attached.
DO:
• Make sure the electrical outlet is rated at the same voltage as that stated
on the bottom of the blender motor base.
•
Do not attempt to mash potatoes, knead heavy dough, or beat egg whites.
• Don’t remove blender jar while unit is on. Keep the blender jar cover on
the blender jar while blending.
• Always use the blender on a clean, sturdy and dry surface.
• Always add liquid ingredients to the blender jar first, then add
remaining ingredients. This will ensure that ingredients are
uniformly mixed.
• Cut most foods into cubes approximately 1⁄2 inch (1.3 cm) to 1 inch (2.5
cm) to achieve a more uniform result. Cut all cheeses into pieces no
larger than 1⁄2 inch (1.3 cm).
• Don't twist locking ring from blender jar when removing blender jar from
motor base. Simply lift blender jar from motor base.
• Don’t overblend foods. Blender will achieve most desired results in
seconds, not minutes.
•
Don’t overload blender. If the motor stalls, turn the blender off immediately,
unplug the unit, and remove a portion of the food, then continue.
• Use the measured pour lid to measure liquid ingredients such as alcohol.
Replace measured pour lid or blending stick after ingredients have
been added.
• Don’t use any utensil, other than the blending stick provided, inside the
blender jar while the motor is on. Note: Blending stick is to be used only
with cover in place.
• Use a rubber or plastic spatula as needed, only when the blender is
turned off. Never use metal utensils, as damage may occur to the blender
jar or cutting assembly.
• Don’t use any container or accessories not recommended by Cuisinart.
Doing so may result in injury.
• Don’t place hands inside the blender jar or insert fingers into the
dispenser hole when blender is plugged in.
• Don’t add boiling liquids or frozen foods (except ice cubes or 1⁄2-inch
pieces of frozen fruit) to glass blender jar. Boiling liquids should cool for
5 minutes before being placed in blender jar.
• Place cover on firmly. Always operate the blender with the cover on.
• Make sure locking ring with cutting assembly is tightly attached to
blender jar.
• Always remove locking ring with cutting assembly, rubber gasket,
dispenser tap and dispenser plug before cleaning.
• When scraping the blender jar with a spatula, remove the food from the
sides of the blender jar and place food in the center of the blender jar,
over the cutting assembly.
• When chopping fresh herbs, garlic, onion, zest, bread crumbs, nuts,
spices, etc, make sure the blender jar and cutting assembly are com-
pletely dry.
• If food tends to stick to the sides of the blender jar when blending, use
blending stick and pulse in short bursts.
• Pulses should be short bursts. Space the pulses so the blades stop rotat-
ing between pulses.
• Always use blending stick with cover in place.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
order. (California residents need only supply
proof of purchase and should call 1-800-726-
0190 for shipping instructions).
then take the product to an independent repair
facility if service or repair can be economically
accomplished.* Cuisinart and not the consumer
will be responsible for the reasonable cost of
such service, repair, replacement, or refund for
nonconforming products under warranty.
LIMITED THREE-YEAR
WARRANTY
This warranty supersedes all previous warranties
on Cuisinart® Smooth Operator® Blenders. This
warranty is available to consumers only. You are
a consumer if you own a Cuisinart® Smooth
Operator® Blender that was purchased at retail
for personal, family, or household use. Except as
otherwise required under applicable state law,
this warranty is not available to retailers or other
commercial purchasers or owners. We warrant
that your Cuisinart® Smooth Operator® Blender
will be free of defects in material or workmanship
under normal home use for three years from the
date of original purchase. We suggest that you
complete and return the enclosed product regis-
tration card promptly to facilitate verification of
the date of original purchase. However, return of
the product registration card does not eliminate
the need for the consumer to maintain the origi-
nal proof of purchase in order to obtain the war-
ranty benefits. In the event that you do not
have proof of purchase date, the purchase date
for purposes of this warranty will be the date of
manufacture.
NOTE: For added protection and secure handling
of any Cuisinart® product that is being returned,
we recommend you use a traceable, insured
delivery service. Cuisinart cannot be held respon-
sible for in-transit damage or for packages that
are not delivered to us. Lost and/or damaged
products are not covered under warranty.
Your Cuisinart® Smooth Operator® Blender has
been manufactured to strict specifications and
has been designed for use with the Cuisinart®
Smooth Operator® Blender accessories and
replacement parts. These warranties expressly
exclude any defects or damages caused by
accessories, replacement parts, or repair service
other than those that have been authorized by
Cuisinart. These warranties do not cover any
damage caused by accident, misuse, shipment,
or other than ordinary household use. These
warranties exclude all incidental or consequential
damages. Some states do not allow the exclu-
sion of or limitation of incidental or consequential
damages, so the foregoing limitation may not
apply to you.
California residents may also, at their preference,
return nonconforming products directly to
Cuisinart for repair or, if necessary, replacement
by calling our Consumer Service Center toll-free
at 1-800-726-0190. Cuisinart will be responsible
for the cost of the repair, replacement, and ship-
ping and handling for such nonconforming prod-
ucts under warranty.
BEFORE RETURNING YOUR
CUISINART PRODUCT
If you are experiencing problems with your
Cuisinart® product, we suggest that you call our
Consumer Service Center at 1-800-726-0190
before returning the product for servicing. Often,
our Consumer Service Representatives can help
solve the problem without having the product
serviced. If servicing is needed, a Representative
can confirm whether the product is under warran-
ty and direct you to the nearest service location.
If your blender should prove to be defective
within the warranty period, we will repair it
(or, if we think it necessary, replace it) without
charge to you. To obtain warranty service, please
call our Consumer Service Center toll-free at
1-800-726-0190 or write to:
*Important: If the nonconforming product is to be
serviced by someone other than Cuisinart’s
Authorized Service Center, please remind the
servicer to call our Consumer Service Center at
1-800-726-0190 to ensure that the problem is
properly diagnosed, the product is serviced with
the correct parts, and to ensure that the product
is still under warranty.
CALIFORNIA
RESIDENTS ONLY
California law provides that for In-Warranty
Service, California residents have the option of
returning a nonconforming product (A) to the
store where it was purchased or (B) to another
retail store which sells Cuisinart® products of the
same type. The retail store shall then, according
to its preferences, either repair the product, refer
the consumer to an independent repair facility,
replace the product, or refund the purchase price
less the amount directly attributable to the con-
sumer’s prior usage of the product. If either of the
above two options does not result in the appro-
priate relief to the consumer, the consumer may
Cuisinart
150 Milford Road
East Windsor, NJ 08520
To facilitate the speed and accuracy of your
return, please enclose $10.00 for shipping and
handling of the product. Please also be sure to
include a return address, daytime phone number,
description of the product defect, product serial
number (stamped on bottom of product base),
and any other information pertinent to the prod-
uct’s return. Please pay by check or money
©2007 Cuisinart
Cuisinart® is a registered trademark of Cuisinart
150 Milford Road
East Windsor, NJ 08520
Printed in China
05CU26022
Any other trademarks or service marks used herein are the
trademarks or service marks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Version no.: SMO56 IB-5999A
Size : 216mm(W) X 178mm(H)
Material: Cover:157gam Matt art paper, inside: 120gsm Gloss art paper
Cover:Gloss varnishing
Coating:
Color (Front): 4C+1C(CMYK+PMS8501C)
(Back): 1C+1C(Black)
Astor You
Co-ordinator :
XieFaXing Des cription : IB-5999A
XieFaXing Code
Date: 23/04/07
OPERATOR: Xu
: E-IB-5999A
PANTONE 8501 C
PMS8501C
Download from Www.Somanuals.com. All Manuals Search And Download.
|