Crown Equipment Home Gym Series WB User Manual

C
Specifications  
Series WB  
Counterbalanced  
Walkies  
Series  
WB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Series WB  
Model 20 WB*  
2000 lb rated capacity  
at 24" load center  
20WBTL  
Limited Free Lift  
20WBTF  
Full Free Lift  
A
Lifting Height  
Capacity  
Free Lift  
Collapsed Height  
Extended Height**  
Net Weight Less Battery  
Head Length  
106"  
2000  
12  
71  
154.5  
3368  
130"  
2000  
12  
83  
178.5  
3447  
106"  
2000  
23  
71  
154.5  
3382  
130"  
2000  
35  
83  
178.5  
3455  
lb  
lb  
B
C
D
E
F
G
H
J
65"  
47.5"  
56.6"  
27%  
36"  
Wheelbase  
Turning Radius  
Grade Clearance  
Overall Width  
Fork Length  
30", 36", 42" & 48"  
Maximum Battery Size  
Minimum Battery Weight  
13.12" x 31.75" x 23.25" High  
975 lb  
Right Angle Stacking Aisle Width  
Head Length (D) + Load Length + 8" Clearance  
Model 30 WB*  
3000 lb rated capacity  
at 24" load center  
30WBTL  
Limited Free Lift  
30WBTF  
Full Free Lift  
30WBTT  
3 Stage Mast  
A
Lifting Height  
Capacity  
Free Lift  
Collapsed Height  
Extended Height**  
Net Weight Less Battery  
Head Length  
106"  
3000  
12  
71  
154.5  
4271  
130"  
3000  
12  
83  
178.5  
4384  
106"  
3000  
23  
71  
154.5  
4291  
70"  
52.5"  
130"  
3000  
35  
83  
178.5  
4402  
154"  
3000  
23  
71  
202.5  
4787  
lb  
lb  
B
C
D
E
F
G
H
J
Wheelbase  
Turning Radius  
Grade Clearance  
Overall Width  
Fork Length  
Maximum Battery Size  
Minimum Battery Weight  
61.6"  
26%  
37"  
30", 36", 42" & 48"  
13.12" x 31.75" x 23.25" High  
975 lb  
Right Angle Stacking Aisle Width  
Head Length (D) + Load Length + 8" Clearance  
Model 40 WB*  
4000 lb rated capacity  
at 24" load center  
40WBTL  
Limited Free Lift  
40WBTF  
Full Free Lift  
40WBTT  
3 Stage Mast  
A
Lifting Height  
Capacity  
Free Lift  
Collapsed Height  
Extended Height**  
Net Weight Less Battery  
Head Length  
106"  
4000  
11.25  
71  
155.5  
4596  
130"  
4000  
11.25  
83  
179.5  
4709  
106"  
4000  
22.5  
71  
155.5  
4701  
77.5"  
59.5"  
130"  
4000  
34.5  
83  
179.5  
4824  
154"  
4000  
22.5  
71  
203.5  
5121  
lb  
lb  
B
C
D
E
F
G
H
J
Wheelbase  
Turning Radius  
Grade Clearance  
Overall Width  
Fork Length  
Maximum Battery Size  
Minimum Battery Weight  
68.6"  
26%  
39"  
30", 36", 42" & 48"  
13.12" x 31.75" x 23.25" High  
975 lb  
Right Angle Stacking Aisle Width  
Head Length (D) + Load Length + 8" Clearance  
* Optional masts, attachments, longer load dimensions, and higher lifting heights may result in derating of the capacity. Contact dealer.  
**Includes 48" high load backrest.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Information  
Series WB  
Hydraulic System  
Drive Unit  
Optional Equipment and  
Modifications  
1. Transistor speed control.  
2. Raise and lower control on  
retractable cord.  
Capacities  
Standard equipment includes:  
Gear drive from motor to drive  
wheel axle. The gear train is  
mounted on ball and tapered  
roller bearings, and operates in  
an oil-filled, sealed housing.  
Model 20WB: 2000 lb  
at 24" load center.  
Model 30WB: 3000 lb  
at 24" load center.  
Model 40WB: 4000 lb  
at 24" load center.  
1. Heavy duty motor and gear  
pump assembled as an  
integral unit.  
2. Spool-type hydraulic control  
valve with built-in check and  
relief valve for efficient over-  
load protection of lift and tilt  
circuits.  
3. Pressure compensating flow  
control valve at base of lift  
cylinder regulates maximum  
lowering speed.  
4. Lift cylinder diameters vary,  
and are designed to maintain  
optimum hydraulic pressure  
depending on capacity of  
truck. All WBTF and WBTT  
models are equipped with a  
three cylinder cluster to  
provide full free lift.  
5. A conveniently located  
raise/lower lever is standard  
equipment. This throttle per-  
mits infinite control. Push but-  
ton raise/lower controls can  
be installed in control handle  
as optional equipment.  
6. Fixed flow control at side of tilt  
cylinder regulates maximum tilt  
speed.  
7. Two double acting piston-type  
tilt cylinders.  
8. A conveniently located lever  
for forward or backward tilt  
activation is standard. This  
throttle permits infinite control  
of tilt functions.  
3. Hour meter.  
4. Higher lifting heights.  
5. Additional counterweight, when  
smaller batteries are used.  
6. One-or two spool auxiliary  
valves for controlling various  
hydraulic attachments.  
7. Special attachment-sideshifter,  
drum handling equipment,  
paper roll clamp. For other  
special attachments, consult  
dealer.  
Brake  
Internal expanding mechanical  
brake with 5" drum and bonded  
brake linings. Brake is applied  
when control handle is within 15°  
of full vertical or full horizontal  
position.  
Maximum Battery Size  
31.75" wide x 13.12" long x  
23.25" high.  
Batteries  
Up to 600 amp hour capacity  
available. 24 volt electrical sys-  
tem. The 20WB, 30WB, and  
40WB must have a battery  
weighing 975 lbs or more.  
Power Unit Structure  
Access panel permits easy  
entry to all electric and hydraulic  
components.  
8. Discharge indicator.  
Travel Speeds  
Lift Structure  
In third speed: Loaded, 2.5 mph;  
Empty, 3.0 mph. These speeds  
are average for all Walkie  
Other Options  
1. Audible Travel Alarm.  
2. Flashing Lights.  
Outer and inner masts con-  
structed of hot rolled carbon steel  
I-beam. Telescoping mast section  
nests in main upright to provide  
better visibility for operator.  
Counterbalanced trucks. For  
safety, third speed is automati-  
cally shut off when forks reach  
68" on WBTL models, or when  
forks extend above free lift on  
WBTF and WBTT models.  
Safety considerations and dan-  
gers associated with audible  
travel alarms and flashing lights  
include:  
• Multiple alarms and/or lights  
can cause confusion.  
• Workers ignore the alarms  
and/or lights after day-in and  
day-out exposure.  
• Operator may transfer the  
responsibility for “looking out”  
to the pedestrians.  
• Annoys operators and  
pedestrians.  
Carriage Rollers  
Alloy steel rollers contoured to fit  
mast are equipped with sealed  
ball bearings.  
Lifting/Lowering Speeds (fpm)  
Control Handle  
Empty (E), Loaded (L)  
Control handle has dual twist-  
grips which control three speeds  
forward and reverse. Twist-grips  
return to neutral when released.  
The handle contains a large  
safety button which reverses the  
direction of the truck should the  
button touch the operator. A  
large horn button is standard  
equipment, as is a third speed  
cutoff switch.  
Lifting Speed Lowering Speed  
Models  
E
L
E
30  
50  
L
26  
42  
20WBTF 64 27  
20WBTL 64 38  
30WBTF 55 26  
30WBTL 56 34  
30WBTT 46 30  
50  
50  
23  
27  
40  
36  
Dimensions and performance  
data given may vary due to  
manufacturing tolerances.  
Performance is based on an  
average size vehicle and is affect-  
ed by weight, condition of truck,  
how it is equipped and the con-  
ditions of the operating area.  
Crown products and specifica-  
tions are subject to change  
without notice.  
40WBTF 44 24  
40WBTL 44 25  
40WBTT 44 23  
20  
20  
20  
23  
25  
26  
Electrical System  
Standard equipment includes:  
Wheels and Tires  
Polyurethane Drive Tire - 13" dia  
x 4.5" wide x 8" dia hub.  
Safety Switches  
1. 24 volt electrical system.  
2. Series wound high torque  
.85 hp drive motor.  
3. Series wound high torque  
5 hp lift motor.  
4. Heavy duty pump contactor  
with replaceable tips.  
5. Four heavy duty travel speed  
contactors. A solid-state time  
relay provides controlled  
acceleration between 2nd  
and 3rd speed.  
6. Fused control and power  
circuits.  
7. Color coded wiring for ease  
of service.  
8. Key switch.  
9. Power disconnect lever.  
1. Third speed switch in control  
handle may be used to shut  
off high speed when operating  
in congested areas.  
Rubber Drive Tire - 13.5" dia x  
5.5" wide x 8" dia hub.  
2. Limit switch automatically  
reduces maximum travel  
speed immediately upon  
extension of second and third  
stages on WBTF and WBTT  
models, and when forks  
extend above 68" on WBTL  
models.  
3. Reversing button on control  
handle reverses direction of  
travel when actuated by the  
operator.  
Load Wheels - 10" dia x 4"  
wide x 6.5" dia hub. 40WB load  
wheels are 5" wide. Polyurethane  
load wheels on 30WB and  
40WB, rubber power saver  
compound standard on  
20WB models.  
Forks  
Fork carriage standard ITA  
Class II hook type mounting.  
Fork lengths - 30", 36", 42" and  
48". Fork spread - adjustable  
33" maximum, 8" minimum.  
Crown Equipment Corporation  
New Bremen, Ohio 45869 USA  
Tel 419-629-2311  
C
Fax 419-629-3796  
crown.com  
Because Crown is continually improving its products,  
specifications are subject to change without notice.  
The Momentum symbols are a trademark of  
Crown Equipment Corporation.  
Copyright 2002 Crown Equipment Corporation  
Printed in U.S.A.  
SF14107 Rev. 6/03  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Coleman Tent 2000010194 User Manual
Conair Iron GS11DR User Manual
Conair Scale Scale User Manual
Cooper Lighting Landscape Lighting OVZ50SR22E4 User Manual
Curtis Water Dispenser MWC519 User Manual
Everpure Water System EC210 User Manual
FEIN Power Tools Drill ASy 630 User Manual
Fellowes Paper Shredder HS 400 User Manual
Festool Saw AT 65 E User Manual
Fisher Paykel Oven BI600ED User Manual