Crown Audio Stereo Amplifier SST SBSC 4632T User Manual

S Y S T E M S O L U T I O N T O P O L O G I E S  
SST-SBSC  
4632T  
he Crown SST-SBSC 4632T is a custom  
three-channel crossover network with CD-  
horn equalization and summed low-  
frequency output specifically designed for use  
with JBL model 4632T ScreenArray® cinema  
speaker systems installed in cinemas, studio  
production and post-production environments.  
T
SST (System Solution Topologies) modules  
install into the back of Crown SST-compatible  
amplifiers, saving rack space and simplifying  
system wiring.  
For more details about the Crown  
SST-SBSC 4632T, contact Crown Technical  
Support at 800-342-6939 or 574-294-8200.  
Also, visit the Crown Audio website at  
Features  
SST modules install into the back of your ampli-  
fier, saving rack space and simplifying system  
wiring  
Neutrik® Combo jacks for balanced input con-  
nection  
High-quality crossover and CD-horn EQ  
module designed specifically for use with JBL  
model 4632T ScreenArray® cinema speaker  
systems  
Specifications  
Performance  
Frequency Response: See graph.  
Signal to Noise (A-Weighted): Better than 85  
dB below rated power.  
Input Impedance: 20 k ohms balanced, 10 k  
ohms unbalanced.  
High-frequency (HF) signals are internally  
routed to the Channel 2 amplifier input, and  
mid-frequency (MF) signals are routed to the  
Channel 1 amplifier input  
Removable terminal block jacks for balanced  
output to other components  
SST Modules add flexibility by allowing you to  
tailor your Crown Contractor (CH/CL) Series or  
CE Series amplifier to your application  
Low-frequency (LF) signals are routed from  
Output B to an external amplifier  
Output Impedance: 600 ohms balanced.  
Total Harmonic Distortion (THD): 1 kHz rated  
power, less than 0.1% THD.  
Crosstalk: > 50 dB from 20 Hz to 20 kHz.  
Maximum Output: +18 dB into 600 ohms.  
System Block Diagram  
Connectors  
Input: Neutrik® Combo jacks.  
DETAIL SHOWING NO CENTER GROUND CONNECTION  
Output: Removable balanced terminal block.  
Frequency Response  
Crown’s Three-Year, No-Fault, Fully Transferable Warranty  
Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown amplifier  
product—an unsurpassed industry standard. With this unprecedented No-Fault protection, your  
new Crown amplifier product is warranted to meet or exceed original specifications for the first  
three years of ownership. During this time, if your unit fails, or does not perform to original  
specifications, it will be repaired or replaced at our expense. About the only things not covered  
by this warranty are those losses normally covered by insurance and those caused by intentional  
abuse. And the coverage is transferable, should you sell your unit.  
Crown International  
1718 W. Mishawaka Rd.  
Elkhart, IN 46517-9439  
TEL: 574-294-8200  
FAX: 574-294-8FAX  
Specifications subject to change without prior notice. Latest  
See your authorized Crown dealer for full warranty disclosure and details. For customers outside  
of the USA, please contact your authorized Crown distributor for warranty information or call  
574-294-8200.  
Crown and Crown Audio are registered trademarks of Crown  
International. Other trademarks are the property of their  
respective owners. Printed in U.S.A.  
© 2005 Crown Audio®, Inc.  
7/05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
132290-5B  

Clarion Car Video System NX702 User Manual
Coleman Camping Equipment 220K195 User Manual
Coleman Water Heater 5034 700 User Manual
Continental Electric Coffee Grinder CE23591 User Manual
Cooper Lighting Indoor Furnishings BSA2 User Manual
Cooper Lighting Projector L1751 User Manual
Coustic Stereo Amplifier 320QE User Manual
Escient Network Card CH 1 User Manual
Garland Fryer S18SF User Manual
GE Answering Machine 16018110 User Manual