®
TOP-MOUNT
REFRIGERATOR
Table of Contents........................................................................ 2
2209920
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATOR SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic
precautions:
■
■
■
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
■
■
Use nonflammable cleaner.
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Use two or more people to move and install
refrigerator.
Disconnect power before installing ice maker (on
ice maker kit ready models only).
■
■
Do not use an extension cord.
Disconnect power before servicing.
Replace all panels before operating.
Remove doors from your old refrigerator.
■
■
■
■
■
Use a sturdy glass when dispensing ice or water
(on some models).
SAVE THESE INSTRUCTIONS
Before you throw away your old refrigerator or freezer:
Take off the doors.
Leave the shelves in place so that children may not easily
climb inside.
Proper Disposa l of
Your Old Refrigera tor
■
■
WARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or
brain damage.
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous
– even if they will sit for “just a few days.” If you are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT:
■
Depending on your model, do not remove any permanent
instruction labels inside your refrigerator or the Tech Sheet
that is fastened behind the base grille.
INSTALLING YOUR
REFRIGERATOR
■
Depending on your model, do not remove the white
Styrofoam insert that is located behind the control panel on
the ceiling of the refrigerator. The insert is part of the
refrigerator and not part of the packing material. If the insert
is removed, ice may migrate down from the freezer and cause
icicles to form.
Unpa cking Your Refrigera tor
WARNING
When MovingYour Refrigerator:
Excessive Weight Hazard
Your refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to protect the floor.
Always pull the refrigerator straight out when moving it.
Do not wiggle or “walk” the refrigerator when trying to move
it, as floor damage could occur.
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
Remove shelves from the shipping position (shelves are
shipped upside down):
IMPORTANT: Do not clean glass shelves with warm water when
they are cold. Shelves may break if exposed to sudden
temperature changes or impact, such as bumping. For your
protection, tempered glass is designed to shatter into many small
pebble-size pieces. This is normal.
NOTE: Glass shelves are heavy. Use special care when removing
them to avoid impact from dropping.
1. Grasp the front of the upper shelf with one hand and use the
other hand to remove packing material from the shelf area.
2. Lower the front of the upper shelf until shelf hooks can be
removed from the shelf supports and pull the shelf forward.
3. Flip the shelf over and insert the rear shelf hooks into the
shelf supports. Tilt the front of shelf up until rear shelf hooks
drop into the shelf supports.
4. Lower the front of the shelf and check to make sure that it is
securely in position.
Removing packaging materials
■
Remove tape and any labels from your refrigerator before
using (except the model and serial number label).
To remove any remaining tape or glue, rub the area briskly
with your thumb. Tape or glue residue can also be easily
removed by rubbing a small amount of liquid dish soap over
the adhesive with your fingers. Wipe with warm water and
dry.
■
■
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see “Refrigerator Safety” section.
On some models, shelves, bins, door shelf rails, and other
feature parts may be packaged in the Interior FeaturePak.
Follow the instructions contained in the package for proper
assembly.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Spa ce Requireme nts
Elec tric a l Requirements
WARNING
WARNING
Explosion Hazard
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion,
or fire.
Do not use an extension cord.
■
■
■
To ensure proper ventilation for your refrigerator, allow for a
.5 in. (1.25 cm) space on each side.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Allow 3 in. (7.5 cm) of space between overhead cabinets and
refrigerator top.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection:
Allow at least 1 in. (2.5 cm) between back of cabinet and the
wall.
Recommended grounding method
3" (7.5 cm)
A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an extension
cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the control, (Thermostat, Refrigerator
or Freezer Control depending on the model) to OFF and then
disconnect the refrigerator from the electrical source. When you
are finished, reconnect the refrigerator to the electrical source
and reset the control (Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired setting.
2" (5.08 cm)
■
■
If your refrigerator has an ice maker, make sure you leave
some extra space at the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave
2 in. (5.08 cm) minimum on the hinge side (depending on your
model) to allow for the door to swing open.
■
Level the refrigerator (See “Door Closing and Alignment”).
NOTE: Do not install the refrigerator near an oven, radiator, or
other heat source, nor in a location where the temperature will fall
below 40° F (5° C).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Refrigera tor Doors: Removing, Reversing (optiona l) a nd Repla cing
TOOLS NEEDED: ⁵⁄₁₆ in. hex-head socket wrench, No. 2 Phillips screwdriver, flat-head screwdriver, ⁵⁄₁₆ in. open-end wrench, flat 2 in.
putty knife.
IMPORTANT: Before you begin, turn the refrigerator control OFF, unplug refrigerator or disconnect power. Remove food from doors.
Door Removal &
Door Swing Reversal (optional)
Replacement
1-2
Top Hinge
1
1-1
1. Cabinet Hinge Hole Plugs
1. 516" Hex-Head Hinge
/
Screws and Washers
2
1
2
5
1. /16" Hex-Head Hinge Screws
2. Top Hinge
3. Shim
Center Hinge
3
1
1. Door Hinge Hole Plug
1. Door Stop
2. Door Stop Screw
3. Spacer
7
1
4. Center Hinge
5
/
16
5.
" Hex-Head Hinge Screws
1. Flat-Head Handle Screws
2. Freezer Handle
6. Spacer
Bottom Hinge
4
1
1. Door Handle
Seal Screw Front
1. Door Handle Sealing Screws
6
5
Side View
Front View
1. Door Stop
2. Spacer
3. Door Stop Screw
4. Bottom Hinge
1. Door Stop Screw
2. Door Stop
1
2
5
/
16
5.
" Hex-Head Hinge Screws
6. Movable Hinge Pin
7. Door Stop Screw
1. Flat-Head Handle Screw
2. Refrigerator Handle
3. Handle Screw
4. Screw Cover
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Refrigerator door
Door and hinge removal
1. Remove the screw cover (see Graphic 6).
2. Remove refrigerator handle assembly as shown. Keep all
parts together (see Graphic 6).
⁵⁄₁₆” Hex-Head Hinge Screw
3. Remove door hinge hole plug from refrigerator door. Move to
opposite side hinge hole as shown (see Graphic 3).
1. Unplug refrigerator or disconnect power.
4. Remove door handle sealing screws. Move to opposite side
2. Keep both doors closed until you are ready to lift them free
of refrigerator door as shown (see Graphic 4).
from the cabinet.
5. Remove door handle seal screw front. Move to opposite side
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
of refrigerator door as shown (see Graphic 7).
6. Remove door stop. Move to opposite side of refrigerator door
as shown (see Graphic 5).
3. Remove the parts for the top hinge as shown in Top Hinge
7. Position refrigerator handle on opposite side of the
refrigerator door as shown (see Graphic 6). Drive top two
screws in handle first. Align lower portion of handle and drive
bottom screw.
graphic.
4. Lift the freezer door free from the cabinet.
5. Remove the parts for the center hinge as shown in the Center
Hinge graphic.
8. Replace screw cover (see Graphic 6).
6. Lift the refrigerator door free from the cabinet.
9. Tighten all screws. Set aside refrigerator door until bottom
7. Remove the parts for the bottom hinge as shown in the
hinge is installed on product.
Bottom Hinge graphic.
Door and hinge replacement
Note: Graphic may be reversed if door swing is reversed.
IMPORTANT: If you want to reverse your doors so that they
open in the opposite direction, follow these steps. If you are
not reversing the doors, see “Door and Hinge Replacement.”
1. Replace the parts for the bottom hinge as shown. Tighten
screws.
Door reversal (optional)
2. Replace the refrigerator door.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
Door Stop Screw
Door Hinge Hole Plug
Cabinet Hinge Hole Plug
Door Handle Screw Cover
Round-Head Handle Screw
3. Assemble the parts for the center hinge as shown and tighten
all screws (see Center Hinge graphic).
4. Replace the freezer door.
Door Handle Sealing Screw
Flat-Head Handle Screw
5. Assemble the parts for the top hinge as shown (see Top
Hinge graphic). Do not tighten screws completely.
6. Line up the doors so that the bottom of the freezer door
aligns evenly with the top of the refrigerator door. Tighten all
screws.
Final Steps
Door Handle Seal Screw Front
1. Check all holes to make sure that hole plugs and screws are
Cabinet
in place.
1. Remove ⁵⁄₁₆ in. hex-head hinge screws from handle side and
2. Plug into a grounded 3 prong outlet. Move into final location.
3. Reset the controls (see “Setting the Controls” section.)
move them to opposite side (see Graphic 1-1).
2. Remove cabinet hinge hole plugs from cabinet top and move
them to opposite side hinge holes as shown (see Graphic
1-2).
Freezer door
1. Remove freezer handle assembly as shown. Keep all parts
together (see Graphic 2).
2. Remove door hinge hole plug. Move to opposite side as
shown (see Graphic 3).
3. Remove door handle sealing screws. Move to opposite side
of freezer door as shown (see Graphic 4).
4. Remove door stop. Move to opposite side of freezer door as
shown (see Graphic 5).
5. Position freezer handle on opposite side of freezer door.
Assemble handle on door as shown (see Graphic 2).
6. Tighten all screws. Set aside door until hinges and
refrigerator compartment door are in place.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Door Closing a nd Alignment
Understa nding Sounds You Ma y Hea r
Your new refrigerator may make sounds that your old one didn’t
make. Because the sounds are new to you, you might be
concerned about them. Most of the new sounds are normal. Hard
surfaces, like the floor, walls, and cabinets, can make the sounds
seem louder than they actually are. The following describes the
kinds of sounds and what may be making them.
Door Closing
NOTE: Keep the four bolts that secured the refrigerator in the
shipping case. They are the leveling legs.
If your refrigerator seems unsteady or you want the doors to
close easier, adjust the refrigerator's tilt using these instructions.
1. Screw the legs all the way into the bolt holes in the bottom
■
If your product is equipped with an ice maker, you will hear a
buzzing sound when the water valve opens to fill the ice
maker for each cycle.
corners of the refrigerator.
2. Plug refrigerator power cord into a 3-prong grounded outlet.
Move the refrigerator into its final position.
■
The defrost timer will click when the automatic defrost cycle
begins and ends. Also, the Thermostat Control (or
Refrigerator Control depending on the model) will click when
cycling on and off.
3. Lower the legs just enough to lift the cabinet off the floor.
4. Adjust the legs to level the refrigerator:
■
Turn the leveling leg to the right to lower that side of
the refrigerator.
■
■
Rattling noises may come from the flow of refrigerant, the
water line, or items stored on top of the refrigerator.
■
Turn the leveling leg to the left to raise that side of the
refrigerator.
Your refrigerator is designed to run more efficiently to keep
your food items at the desired temperature. The high
efficiency compressor may cause your new refrigerator to run
longer than your old one, and you may hear a pulsating or
high-pitched sound.
■
■
■
■
■
■
Water dripping on the defrost heater during a defrost cycle
may cause a sizzling sound.
You may hear the evaporator fan motor circulating the air
through the refrigerator and freezer compartments.
5. Check with level.
As each cycle ends, you may hear a gurgling sound due to
the refrigerant flowing in your refrigerator.
6. Open and close both doors to make sure they swing properly.
If the doors do not close on their own, you will need to raise
the front of the refrigerator so it is slightly higher than the
back. To do this, turn both leveling screws clockwise ¹⁄₂ turn.
Contraction and expansion of the inside walls may cause a
popping noise.
You may hear air being forced over the condenser by the
condenser fan.
IMPORTANT: Be sure to turn both screws an equal amount
or the refrigerator will no longer be level side-to-side.
You may hear water running into the drain pan during the
defrost cycle.
7. Open doors and check if they close automatically. If not,
repeat steps 5 and 6.
8. Using a level, check to see if the refrigerator is still level side-
to-side. Readjust if necessary.
Door Alignment
If the space between your doors looks uneven, you can adjust it
using the instructions below:
1. Pry off the top hinge cover.
2. Loosen the top hinge screws using a ⁵⁄₁₆ in. socket or wrench.
3. Have someone hold the door in place or put a spacer
between the doors while you tighten the top hinge screws.
4. Replace the top hinge cover.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Saving Control
The Power Saving Control operates electronic heaters around the
door openings. these heaters help keep moisture from forming on
the outside of the refrigerator cabinet.
USING YOUR
■
Use the CONSUMES LESS ENERGY setting when
humidity is low.
REFRIGERATOR
■
Use the REDUCES EXTERIOR MOISTURE setting if
moisture forms on the otside of the refrigerator cabinet.
Ensuring Proper Air Circula tion
POWER SAVER
CONSUMES LESS ENERGY
REDUCES EXTERIOR MOISTURE
•
In order to ensure proper temperatures, you need to permit air
flow between the refrigerator and freezer sections. As shown in
the illustration, cool air enters through the bottom of the freezer
section and moves up. Most of the air then flows through the
freezer section vents and recirculates under the freezer floor. The
rest of the air enters the refrigerator section through the top vent.
Adjusting Control Settings
Give the refrigerator time to cool down completely before adding
food. It is best to wait 24 hours before you put food into the
refrigerator. The “mid-settings” indicated in the previous section
should be correct for normal household refrigerator usage. The
controls are set correctly when milk or juice is as cold as you like
and when ice cream is firm.
If you need to adjust temperatures in the refrigerator or freezer,
start by adjusting the Refrigerator Control first. Wait 24 hours
after the refrigerator adjustment to check the freezer
temperature. If it is too warm or too cold, then adjust the Freezer
Control as well.
Use the settings listed in the chart below as a guide. Always
remember to wait at least 24 hours between adjustments.
RECOMMENDED
ADJUSTMENT:
CONDITION/REASON:
Do not block any of these vents with food packages. If the
vents are blocked, airflow will be prevented and temperature and
moisture problems may occur.
REFRIGERATOR section
too warm
Turn the
REFRIGERATOR
Control to “4” wait 24
hours. If needed, turn
the FREEZER Control
to “C”. Wait 24 hours,
then re-check
■ Door opened often
IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To prevent
odor transfer and drying out of food, wrap or cover foods tightly.
(See the “Refrigerator Safety” section for details.)
■ Large amount of food added
■ Room temperature very
warm
FREEZER section too warm
■ Door opened often
Turn the
REFRIGERATOR
Control to “3” wait 24
hours. If needed, turn
the FREEZER Control
to “A”. Wait 24 hours,
then re-check
Setting the Control(s)
For your convenience, the refrigerator controls are preset at
the factory. Controls for the refrigerator and freezer are located
in the top of the refrigerator section.
■ Large amount of food added
■ Very cold room temperature
(can’t cycle often enough)
When you first install your refrigerator, make sure that the
control(s) are still preset. The control(s) should be at the
“mid-settings” as shown for each control.
BOTH sections too warm
■ Door opened often
Turn the
REFRIGERATOR
Control to “4” wait 24
hours. If needed, turn
the FREEZER Control
to “B”. Wait 24 hours,
then re-check
REFRIGERATOR
•
FREEZER
•
WARMER
COOLER
WARMER
COLDER
■ Large amount of food added
3
B
■ Very warm or very cold room
temperature (can’t cycle often
enough)
NOTE: To turn your refrigerator off, turn the refrigerator control to
the word OFF or until the word OFF appears, as shown below.
Your product will not cool when the refrigerator control is set to
OFF.
REFRIGERATOR section
too cold
Turn the
REFRIGERATOR
Control to “2” wait 24
hours. If needed, turn
the FREEZER Control
to “B”. Wait 24 hours,
then re-check
■ Controls not set correctly for
Give your refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before you put food into
the refrigerator.
your conditions
IMPORTANT: If you add food before the refrigerator has cooled
completely, your food may spoil. Turning the Refrigerator or
Freezer Control(s) to a higher (colder) than recommended
setting will not cool the compartments any faster.
FREEZER section too cold
Turn the
REFRIGERATOR
Control to “3” wait 24
hours. If needed, turn
the FREEZER Control
to “C”. Wait 24 hours,
then re-check
■ Controls not set correctly for
your conditions
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility or Egg Bin
REFRIGERATOR FEATURES
(on some models -Accessory)
Depending on your model, you may have a one piece utility bin or
a three piece egg bin. To use the three piece egg bin, remove the
cover and place the eggs in the egg tray. Replace the cover and
store on an interior shelf. If you prefer, you can remove the egg
tray and place the entire carton of eggs in the bin. Replace the
cover.
Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word “Accessory.” Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please
call the toll-free number on the cover or in the "Assistance or
Service" section.
NOTE: Eggs should be stored in a covered container. If your
model does not have an egg bin or covered utility bin, store
eggs in their original container on an interior shelf.
Re frigera tor She lves
The shelves in your refrigerator are adjustable to match your
individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will make
finding the exact item you want easier. It will also reduce the
amount of time the refrigerator door is open, and save energy.
To remove and replace a shelf:
1. Remove items from the shelf.
2. Slide the shelf straight out to the stop.
FREEZER FEATURES
3. Depending on your model, lift back or front of the shelf past
the stop. Slide shelf out the rest of the way.
4. Replace the shelf by sliding the back of the shelf into the
Fr eezer Shelf
(on som e m odels)
To remove the shelf:
track in the wall of the cabinet.
5. Guide the front of the shelf into the shelf track. Be sure to
slide the shelf in all the way.
1. Lift entire shelf slightly.
2. Move shelf all the way to one side.
3. Tilt other side up and out of shelf supports.
4. Pull shelf up and out.
Crisper a nd Crisper Cove r
To remove and replace the crisper:
1. Remove the crisper by sliding it straight out.
2. Replace the crisper by sliding it back in.
To replace the shelf:
1. Tilt the shelf and insert into freezer compartment.
2. Insert one end of the shelf all the way into the center of the
shelf supports.
3. Lower other end of shelf and insert into the shelf supports.
4. Lower shelf into place.
NOTE: The shelf should lower slightly and lock into place. If the
shelf does not appear stable, make sure both ends of the shelf
are inserted into the shelf supports.
Fruit and vegetable storage guide
Fruits: Wash, let dry and store in refrigerator in plastic bag or
crisper. Do not wash or hull berries until they are ready to use.
Sort and keep berries in original container in crisper, or store in a
loosely closed paper bag on a refrigerator shelf.
Vegetables with skins: Place in plastic bags or plastic container
and store in crisper.
Leafy vegetables: Wash in cold water, drain and trim or tear off
bruised and discolored areas. Place in plastic bag or plastic
container and store in crisper.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Remove all removable parts from inside, such as shelves,
Frozen food storage guide
crispers, etc.
Storage times will vary according to the quality and type of food,
the type of packaging or wrap used (should be airtight and
moisture-proof), and the storage temperature. Seal the package
or container securely to prevent taste and odor transfer
throughout the product. Ice crystals inside a sealed package are
normal. This simply means that moisture in the food and air
inside the package have condensed, creating ice crystals.
3. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
■
Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts interior
and door liners or gaskets.
Put no more unfrozen food into the freezer than will freeze within
24 hours (no more than 2-3 lb of food per cubic foot [907-1,350 g
per L] of freezer space). Leave enough space in the freezer for air
to circulate around packages. Be careful to leave enough room
for the door to close tightly.
■
■
Do not use paper towels, scouring pads, or other harsh
cleaning tools. These can scratch or damage materials.
To help remove odors, wash interior walls with a mixture
of warm water and baking soda (2 tbs. to 1 qt.
[26 g to .95 L] of water).
NOTE: For more information on preparing food for freezing,
check a freezer guide or reliable cookbook.
4. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water. Do
not use abrasive or harsh cleaners. Dry thoroughly with a soft
cloth.
CARING FOR YOUR
REFRIGERATOR
For additional protection against damage to painted metal
exteriors, apply appliance wax (or auto paste wax) with a
clean, soft cloth. Do not wax plastic parts.
5. Clean the condenser coils regularly. Coils may need to be
cleaned as often as every other month. This may help save
energy.
Clea ning Your Refrigera tor
Style 1 - Condenser coils behind base grille:
■
■
Remove the base grille (see the “Base Grille” section).
Use a vacuum with an extended attachment to clean the
condenser coils when they are dusty or dirty.
■
Replace the base grille when finished.
Style 2 - Condenser coils in back of the refrigerator:
■
Pull refrigerator out away from the wall (see the
“Unpacking Your Refrigerator” section).
Explosion Hazard
■
■
Vacuum coils when they are dusty or dirty.
Use nonflammable cleaner.
Roll refrigerator back into place. Make sure to leave 1 in.
(2.5 cm) between the cabinet back and the wall.
Failure to do so can result in death, explosion,
or fire.
■
Check to see if the refrigerator is level.
6. Plug in refrigerator or reconnect power.
Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to prevent
odors from building up. Wipe up spills immediately.
Cha nging the Light Bulb
To clean your refrigerator:
1. Unplug refrigerator or disconnect power.
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to
replace the bulb with one of the same size, shape, and wattage.
To change the refrigerator light:
1. Unplug refrigerator or disconnect power.
2. Reach behind the Control Panel and unscrew the bulb.
3. Replace the bulb with a 40-watt appliance bulb.
4. Plug in refrigerator or reconnect power.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Powe r Interruptions
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the
cost of an unnecessary service call.
If the electricity in your house goes off, call the power company
and ask how long it will be off.
1. If the power will be out for 24 hours or less, keep both
refrigerator doors closed to help food stay cold and frozen.
2. If the power will be out for more than 24 hours:
Your refrigerator will not operate
a) Remove all frozen food and store it in a frozen food
locker.
■
■
■
■
Is the power supply cord unplugged?
Plug into a grounded 3 prong outlet.
OR
b) Place 2 lbs. (907 g) of dry ice in the freezer for every cubic
foot (28 L) of freezer space. This will keep the food frozen
for two to four days.
Has a household fuse or circuit breaker tripped?
Replace the fuse or reset the circuit.
Is the Refrigerator Control turned to the OFF position?
Refer to the “Setting the Control(s)” section.
OR
c) If neither a food locker nor dry ice is available, consume
or can perishable food at once.
Is the refrigerator defrosting?
REMEMBER: A full freezer stays cold longer than a partially filled
one. A freezer full of meat stays cold longer than a freezer full of
baked goods. If you see that food contains ice crystals, it may be
refrozen, although the quality and flavor may be affected. If the
condition of the food is poor, dispose of it.
Recheck to see if the refrigerator is operating in 30 minutes.
Your refrigerator will regularly run an automatic defrost cycle.
The lights do not work
■
■
Is the power supply cord unplugged?
Plug into a grounded 3 prong outlet.
Va ca tion a nd Moving Ca re
Is a light bulb loose in the socket?
Vacations
Turn the refrigerator control to OFF. Disconnect the
refrigerator from the electrical supply. Gently remove the bulb
and reinsert. Then reconnect the refrigerator to the electrical
supply and reset the refrigerator control.
If you choose to leave the refrigerator on while you’re away,
use these steps to prepare your refrigerator before you leave.
1. Use up any perishables and freeze other items.
2. Empty the ice bin.
If you choose to turn the refrigerator off before you leave,
follow these steps.
■
Has a light bulb burned out?
Replace with an appliance bulb of the same wattage, size,
and shape. See the “Changing the Light Bulb(s)” section.
1. Remove all food from the refrigerator.
There is water in the defrost drain pan
2. Depending on your model, turn the Thermostat Control or
Refrigerator Control to OFF. See the “Setting the Controls”
section.
■
■
Is the refrigerator defrosting?
The water will evaporate. It is normal for water to drip into the
defrost pan.
3. Clean refrigerator, wipe it, and dry well.
4. Tape rubber or wood blocks to the tops of both doors to prop
them open far enough for air to get in. This stops odor and
mold from building up.
Is it more humid than normal?
Expect that the water in the defrost pan will take longer to
evaporate. This is normal when it is hot or humid.
Moving
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
The motor seems to run too much
1. Remove all food from the refrigerator and pack all frozen food
■
Is the room temperature hotter than normal?
Expect the motor to run longer under warm conditions. At
normal room temperatures, expect your motor to run about
40% to 80% of the time. Under warmer conditions, expect it
to run even more of the time.
in dry ice.
2. Depending on your model, turn the Thermostat Control or
Refrigerator Control to OFF. See the “Setting the Controls”
section.
3. Unplug the refrigerator.
4. Empty water from the defrost pan.
5. Clean, wipe, and dry thoroughly.
6. Take out all removable parts, wrap them well, and tape them
together so they don’t shift and rattle during the move.
7. Depending on the model, raise the front of the refrigerator so
it rolls more easily OR screw in the leveling legs so they don't
scrape the floor. See the “Door Closing” or “Leveling Your
Refrigerator” section.
8. Tape the doors shut and the power cord to the refrigerator
cabinet.
When you get to your new home, put everything back
and refer to the “Installing Your Refrigerator” section for
preparation instructions.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
Has a large amount of food just been added to the
refrigerator?
Adding a large amount of food warms the refrigerator. It is
normal for the motor to run longer in order to cool the
refrigerator back down. See the “Refrigerator Features”
section.
There is interior moisture build-up
■
■
Are the air vents blocked in the refrigerator?
Remove any objects from in front of the air vents. Refer to
“Ensuring Proper Air Circulation” for the location of air vents.
Are the doors opened often?
Is the door opened often?
Expect the motor to run longer when this occurs. In order to
conserve energy, try to get everything you need out of the
refrigerator at once, keep food organized so it is easy to find,
and close the door as soon as the food is removed.
To avoid humidity build-up, try to get everything you need out
of the refrigerator at once, keep food organized so it is easy
to find, and close the door as soon as the food is removed.
(When the door is opened, humidity from the room air enters
the refrigerator. The more often the door is opened, the faster
humidity builds up, especially when the room itself is very
humid.)
■
■
■
Is the control set correctly for the surrounding
conditions?
Refer to the “Setting the Control(s)” section.
■
■
Is the room humid?
It is normal for moisture to build up inside the refrigerator
when the room air is humid.
Are the doors closed completely?
Push the doors firmly shut. If they will not shut all the way, see
“The doors will not close completely” later in this section.
Is the food packaged correctly?
Are the condenser coils dirty?
Check that all food is securely wrapped. If necessary,
repackage food according to the guidelines in the
“Refrigerator Features” section. Wipe off damp food
containers before placing in the refrigerator.
This prevents air transfer and makes the motor work harder.
Clean the condenser coils. Refer to the “Cleaning Your
Refrigerator” section.
NOTE: Your new refrigerator will run longer than your old one due
to its high efficiency motor.
■
■
Is the control set correctly for the surrounding
conditions?
Refer to the “Setting the Control(s)” section.
The refrigerator seems to make too much noise
Was a self-defrost cycle completed?
It is normal for droplets to form on the back wall after the
refrigerator self-defrosts.
■
The sounds may be normal for your refrigerators.
Refer to the “Understanding Sounds You May Hear” section.
The doors are difficult to open
The divider between the two compartments is warm
■
Are the gaskets dirty or sticky?
Clean gaskets and the surface that they touch. Rub a thin
coat of paraffin wax on the gaskets following cleaning.
The warmth is probably due to normal operation of the automatic
exterior moisture control.
Temperature is too warm
■
■
Are the air vents blocked in either compartment? This
prevents the movement of cold air from the freezer to the
refrigerator.
Remove any objects from in front of the air vents. Refer to
“Ensuring Proper Air Circulation” for the location of air vents.
Are the door(s) opened often?
Be aware that the refrigerator will warm when this occurs. In
order to keep the refrigerator cool, try to get everything you
need out of the refrigerator at once, keep food organized so it
is easy to find, and close the door as soon as the food is
removed.
■
■
Has a large amount of food just been added to the
refrigerator or freezer?
Adding a large amount of food warms the refrigerator. It can
take several hours for the refrigerator to return to the normal
temperature.
Is the control set correctly for the surrounding
conditions?
Refer to the “Setting the Control(s)” section.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The doors will not close completely
ASSISTANCE OR SERVICE
■
Are food packages blocking the door open?
Rearrange containers so that they fit more tightly and take up
less space.
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
■
■
Is the ice bin out of position?
Push the ice bin in all the way.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
Are the crisper cover, pans, shelves, bins, or baskets out
of position?
Put the crisper cover and all pans, shelves, bins, and baskets
back into their correct positions. See the “Refrigerator
Features” section for more information.
If you need replacement parts
If you need to order replacement parts, we recommend that you
only use factory specified replacement parts. Factory specified
replacement parts will fit right and work right because they are
made with the same precision used to build every new Crosley®
appliance.
■
■
■
Are the gaskets sticking?
Clean gaskets and the surface that they touch. Rub a thin
coat of paraffin wax on the gaskets following cleaning.
Does the refrigerator wobble or seem unstable?
Level the refrigerator. Refer to the “Door Closing and
Alignment” section.
To locate factory specified replacement parts in your area, call
our Consumer Assistance Center telephone number or your
nearest designated service center.
Were the doors removed during product installation and
not properly replaced?
Remove and replace the doors according to the “Refrigerator
Doors: Removing, Reversing (optional) and Replacing”
section, or call a qualified service technician.
If you need service
Call the Whirlpool Consumer Assistance Center
toll free: 1-800-253-1301.
Our consultants provide assistance with:
■
■
■
■
■
Features and specifications on our full line of appliances.
Installation information.
The doors are difficult to open
Use and maintenance procedures.
Accessory and repair parts sales.
■
■
Are the gaskets dirty or sticky?
Clean gaskets and the surface that they touch. Rub a thin
coat of paraffin wax on the gaskets following cleaning.
Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
The doors will not close completely
■
Referrals to local dealers, repair parts distributors, and
service companies.
Are food packages blocking the door open?
Rearrange containers so that they fit more tightly and take up
less space.
Whirlpool designated service technicians are trained to fulfill the
product warranty and provide after-warranty service, anywhere in
the United States.
■
■
Is the ice bin out of position?
Push the ice bin in all the way.
To locate the Whirlpool designated service company in your area,
you can also look in your telephone directory Yellow Pages.
Are the crisper cover, pans, shelves, bins, or baskets out
of position?
Put the crisper cover and all pans, shelves, bins, and baskets
back into their correct positions. See the “Refrigerator
Features” section for more information.
For further assistance
If you need further assistance, you can write to Crosley with any
questions or concerns at:
Crosley Distribution Center
c/o Correspondence Dept.
675 North Main Street
■
■
■
Are the gaskets sticking?
Clean gaskets and the surface that they touch. Rub a thin
coat of paraffin wax on the gaskets following cleaning.
Winston-Salem, NC 27102-2111
Does the refrigerator wobble or seem unstable?
Level the refrigerator. Refer to the “Door Closing and
Alignment” section.
Please include a daytime phone number in your correspondence.
Were the doors removed during product installation and
not properly replaced?
Remove and replace the doors according to the “Refrigerator
Doors: Removing, Reversing (optional) and Replacing”
section, or call a qualified service technician.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
15
Download from Www.Somanuals.com. All Manuals Search And Download.
®
CROSLEY REFRIGERATOR WARRANTY
ONE-YEAR FULL WARRANTY ON REFRIGERATOR
For one year from the date of purchase, when this refrigerator is operated and maintained according to instructions attached to or
furnished with the product, Whirlpool Corporation will pay for factory specified replacement parts and repair labor costs to correct
defects in materials or workmanship. Service must be provided by a Whirlpool designated service company.
FIVE-YEAR FULL WARRANTY ON SEALED REFRIGERATION SYSTEM
For five years from the date of purchase, when this refrigerator is operated and maintained according to instructions attached to or
furnished with the product, Whirlpool Corporation will pay for factory specified replacement parts and repair labor costs to correct
defects in materials or workmanship in the sealed refrigeration system. These parts are: compressor, evaporator, condenser, dryer, and
connecting tubing. Service must be provided by a Whirlpool designated service company.
Whirlpool Corporation will not pay for:
1. Service calls to correct the installation of your refrigerator, to instruct you how to use your refrigerator, to replace house fuses or
correct house wiring or plumbing, or to replace light bulbs.
2. Repairs when your refrigerator is used in other than normal, single-family household use.
3. Pickup and delivery. Your refrigerator is designed to be repaired in the home.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God, or use of products not approved
by Whirlpool Corporation.
5. Any food loss due to product failure.
6. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
7. Replacement parts and repair labor costs for units operated outside the United States.
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Outside the 50 United States, this warranty does not apply. Contact your authorized Crosley dealer to determine if another
warranty applies.
Whirlpool Corporation is responsible for providing any in-warranty service covered in this warranty. If you need service, first see the
“Troubleshooting” section of this book. After checking “Troubleshooting”, additional help can be found by checking the “Assistance or
Service” section or by calling the Whirlpool Consumer Assistance Center, 1-800-253-1301 (toll free) from anywhere in the U.S.A. or
writing Crosley Distribution Center, c/o Correspondence Dept., 675 N. Main St., Winston-Salem, NC 27102-2111.
01/00
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Dealer name_________________________________________
Address ____________________________________________
Phone number _______________________________________
Model number _______________________________________
Serial number _______________________________________
Purchase date _______________________________________
Write down the following information about your refrigerator to
better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label located on the inside wall of the refrigerator
compartment.
2209920
2/00
Printed in Mexico
© 2000 All rights reserved.
® Registered Trademark of Crosley
Download from Www.Somanuals.com. All Manuals Search And Download.
|