04-09-08
CR6001A
Archiver
910-2815000-0010-100
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
Welcome
Table of Contents
Thank you for purchasing the Crosley Archiver
(CR6001A). Before operating this unit, please read
this manual thoroughly and retain it for future
reference.
Getting Started
Repeat Playback
Programmed Playback
Control Locators....................... 4,5
Unpacking................................. 6
Power Source........................... 6
1
2
To repeat a single track, choose the track that
you want to repeat, then press the Play/Pause
Button (16) to start the track. Press the Repeat
Button (9) once to repeat this track.
1
2
Press the Program Button (10). " 01" will
shown on the display.
About This Manual
Press the Forward Skip Button (15) or
the Backward Skip Button (14) to select
a track.
To repeat all tracks, press the Play/Pause
Button (16) to start the CD. Press the Repeat
Button (9) twice to repeat all tracks. Once the
CD ends, it will start over again from the
beginning of the CD.
Instructions in this manual describe the control
functions of the CR6001A.
Base Operation
3
4
5
6
Press the Program Button (10) again to
store the selected track number.
Turntable Operation.................. 7
Cassette Operation.................. 8
Included in the package:
Archiver
3
To erase the repeat function, press the Repeat
Button(9) again.
45 RPM adapter
3.5mm Stereo cable
USB cable
Repeat steps 2 and 3 above to program
other tracks.
Radio Operation....................... 8
USB Operation......................... 8
Software disc
Press the Play/Pause Button (16) to start
Programmed playback.
Software Installation Guide
CD Operation
To erase the programmed sequence,
press the Stop Button (13) twice.
Programmed tracks will also erase
when the CD Door (11) is opened.
Playing a CD............................. 9,10
Programmed Playback............. 10
NOTE: Maximum of 20 tracks can be programmed
to play in any order.
Connecting Optional Equipment
Auxiliary Input ......................... 11
General
Troubleshooting Guide.......... 11
Warranty..............................
12
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Control Locators
18 19
20
Radio Operation
Cassette Operation
Unit Controls
18 Hold Down Clip
19 Turntable Suspension Screw
20 Cue Lever
21 Tone Arm Rest
22 Speed Control Switch
23 Tone Arm
1
2
Rotate the Function Switch (2) to TAPE mode.
1
2
3
4
Rotate the Function Switch (2) to select
RADIO mode.
While in TAPE mode,press the Stop/Eject (35)
button on the cassette player to open the cassette
door.
Set the Band Button(AM/FM) (7) to the
desired band (AM or FM).
21
22
Select the desired radio station by rotating
Tuning Knob (5)
24 Turntable
3
Insert a prerecorded cassette tape into the
cassette door.
23
25 Adapter For 45 rpm Records
26 LINE IN Jack
27 LINE IN Switch
28 LINE OUT Jack
29 USB Jack
30 AC Power Cord
31 FM Wire Antenna
32 Play
Adjust the Volume Knob (12) to the desired
sound level.
4
5
Press the Play button (32) to begin play.
To stop playback, press the Stop/Eject (35)
button.
Antenna
24
6
Press the Stop/Eject (35) button again to
eject the cassette.
Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA (31) , move the wire until
the reception is clear and with no interferences. For
AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the
position in which the best reception is obtained. Do
not connect the EXTERNAL FM ANTENNA (31) to
any outside antenna.
33 Rewind
34 Fast Forward
35 Stop/Eject
/
25
36 Cassette Door
To Fast Forward or Rewind
1
2
3
While playback is stopped, press the Fast
Forward (34) or Rewind (33) button to fast
forward or rewind the cassette.
26 27
USB Operation
Once the desired position is reached on the
cassette, press the Stop/Eject (35) button
to stop the cassette.
Using the included software and cable, the USB
connection allows you record your records onto your
computer. Follow these instructions to use the USB.
Press the Play button (32) to begin play.
1
2
Insert the enclosed software CD into your
computer.
NOTE: The cassette player plays the side of the
cassette facing away from the unit. To
play the other side of the cassette, you
must eject the cassette and turn it over.
Follow the instructions on the computer screen
to install the software. If the software does not
load automatically, browse the CD and open
the Read Me folder for further instructions.
30
31
28 29
3
4
5
6
Connect the small end of the USB cable to the
USB Jack (29) on the back of the unit.
Connect the other end to a USB port on your
computer.
On your computer, open the Record Recording
Software.
For instructions on operating the Record
Recording Software, browse the software CD
and open the Read Me folder.
32 33 34 35 36
5
8
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING:
Connecting Optional Equipment
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION:
Auxiliary Input
Troubleshooting
Use of controls or adjustments or performance of procedures other than those specified
may result in hazardous radiation exposure.
There is no Power
1
2
3
4
You can connect external components to your
unit by using the Auxiliary Input.
1
The AC plugged is not well connected.
CAUTION
Plug Auxiliary cable into the LINE IN Jack (26)
on the back of your unit.
2
Make sure the Power Button is pushed in.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
There is no Sound
Switch the LINE IN Switch (27) to the ON
position.
1
Check the volume level by turning the volume
knob.
CAUTION:
Plug the other end of the Auxililary cable into
the output jack on your desired external
component.
2
Make sure the LINE IN SWITCH is in the OFF
position if the LINE IN JACK is not being used.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Turntable will not work
5
6
Check the volume level of your external
component.
1
Make sure the function switch is set to phono.
The lighting flash with arrowhead symbol, within an equilateral triangle, is
intended to alert user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute
risk of electric shock to persons.
2
Make sure the protective needle cover is
removed.
See operators manual for correct operation of
the external component.
NOTE: When not using the Auxiliary Input, make
sure the LINE IN Switch (27) is in the
OFF position.
CD does not play
1
Check to make sure CD is inserted correctly
(label side facing up).
The exclamation point within an equilateral triangle is intended to alert user
to the presence of important operating and maintenance (servicing) instruction
in the literature accompanying the appliance.
2
3
Check that the surface of the CD is clean
Make sure function switch is set to CD.
CAUTION
For Compact Disc Units Only:
INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED
OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM.
•Marking plate was located on bottom enclosure
Specification
Frequency Range
: AM 530 - 1700 KHz
: FM 88 - 108 MHz
: AC 120V ~ 60Hz
: 18W
: External antenna for FM
: Built-in ferrite bar for AM
: 4” 8 ohm 5W x 2
: NP4
Power Supply
Power Consumption
Antennas
Speaker
Replacement Needle
DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
*
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Locators
CD Operation
Playing A CD
Skip Forward And Skip Reverse
Unit Controls
1
1
2
3
4
5
6
7
8
9
Speakers
Function Switch
Tuner Dial
LED Display
Tuning Knob
Headphone Jack
Band Button(AM/FM)
Open/Close Button
Repeat Button
1
Press the Forward Skip Button (15) or
the Backward Skip Button (14) to select
a track.
1
2
Rotate the Function Switch (2) to CD mode.
Press the Open/Close Button (8) to open
the CD Door (11). Place a disc in the tray
with the labeled side of the disc facing up.
2
Press the Play/Pause Button (16) to start
playing the selected track
3
Press the Open/Close Button (8) again
close the CD Door (11). The display will
show “— —“ for a few seconds, then the total
number of tracks on the disc will be displayed.
“00” will be shown when there is no disc inside
the unit.
Search Forward And Reverse During Play
10 Program Button
11 CD Door
12 Volume Knob
13 Stop
14 Backward Skip
15 Forward Skip
16 Play/Pause
17 Power Button
PLAYBACK
2
3
4
5
4
5
6
Press the Play/Pause Button (16) to start
playback.
1
2
Press and hold the Forward Skip Button (15)
or the Backward Skip Button (14) to search
forward or backward though the selected track.
Adjust the Volume Knob(12) to the desired
volume level.
Release the button at the desired point, playback
will resume automatically.
To pause playback, press the Play/Pause
Button (16). press the Play/Pause Button
(16) again to resume playback.
7
To stop playback, press the Stop Button (13).
6 7
8
9
10 11 12 13 14 15 16 17
4
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Basic Operation
Unpacking
Power Source
Turntable Operation
Accessory: ADAPTER FOR 45 RPM
This adapter allows you to play 45 RPM records.
1
Remove packing materials from unit.
Note: Save all packing materials.
1
2
Rotate the Function Switch (2) to Phono mode.
1
2
Unwind the AC Power Cord (30) at the back
of the unit and connect it to a power outlet.
Set the Speed Control Switch (22) to the correct
speed (331/3, 45 or 78 rpm) for the selected
record.
2
3
4
Remove plastic bag covering radio.
Plug A/C cord into appropriate outlet.
Remove plastic safety cover from A/C plug.
3
4
Use the Cue Lever (20) to raise the tone arm
off its rest. Move the tone arm over the record
and use the cue lever to lower it to the point
you want the record to start.
AC
Remove tie from A/C cord and untie antenna
wire on back of radio.
1
2
Place the 45 RPM adapter over the spindle.
Polarized Plug
Gently place your 45 RPM record onto the
turntable.
At the end of the record, the tone arm will return
to its rest.
5
6
7
Open lid and remove styrofoam shipping
material from turntable.
3
This product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature, If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact you electrician to
replace your obsolete outlet. Do not defeat the
purpose of the polarized plug.
3
Follow the steps under turntable operation to
play your record.
Remove black tie-wrap from under the tone
arm.
Remove white protective needle cover by gently
pulling towards the front of the unit.
Headphones Jack Operation
1
2
Connect headphones to the Headphone
Jack (6)
Adjust volume to the desired listening level.
8
Untie the FM antenna and allow it to hang down
in a straight line for optimum FM reception. If
you have trouble tuning in an FM station, move
the external FM antenna for best reception. Do
no connect FM antenna to outside antenna.
NOTE: When using headphones, the sound to the unit
speakers will be cut off.
NOTE: Headphones not included.
Headphone Jack(6)
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|