Instructions for Installation and Use
Dishwasher
Model IDI60
To the Installer:
Before installation please make a note of the product details specified on the back cover
of this book.
The information can be found on the rating plate.
To the User:
You must read the instructions prior to installing and using the appliance
and then retain them for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Electrical Connection
WARNING:Thisappliancemustbeearthed.
Fuses
Safety Information
Your appliance comes fitted with a plug and a 13A fuse. If you need to
replace the fuse, only those rated at 13A and ASTA approved to
BS1362 should be used. If you lose the fuse cover, a replacement
may be obtained from your local authorised Service Centre or
Electrical company. Correct replacement is identified by colour coding
or the marking on base of plug.
At the time of delivery...
All functions of your dishwasher have been thoroughly tested at the
factory. A small number of water marks may have been left as a
result, they will disappear when the appliance is used for the first time.
WARNING:Thedishwashermustnotbeconnectedtotheelectricity
supply while installation is being carried out.
WARNING: DO NOT use the plug unless the fuse cover is fitted.
-
This appliance should only be connected to a 230/240V AC
source, via a properly installed earthed socket.
Use the dishwasher solely in a domestic environment.
DO NOT stand or place heavy objects on the door when it is
open, this could damage the door or cause the appliance to tip
forward.
Changing the Plug
Cut off and dispose of the supplied plug if it does not fit your socket.
-
-
WARNING:ToavoidashockhazardDONOTinsertthediscardedplug
into a socket anywhere else.
IMPORTANT:WIRESINTHEMAINSLEADARECOLOUREDIN
ACCORDANCEWITHTHEFOLLOWINGCODE:
If your family includes children...
Green/Yellow
Blue
-
-
-
Earth
Neutral
Live
-
DO NOT allow children to play with the appliance or tamper
with its controls.
Brown
-
Keep detergents and rinse aids away from children. Keep
children away from the open door of a dishwasher, there could
still be some detergent left inside.
If you change the plug, the colour of the wires in the mains lead may
not correspond with the terminal markings in the plug, which if not
coloured, could be:
EARTH
NEUTRAL
LIVE
‘E’ or
‘N’
‘L’
CAUTION:
Changing the Mains Lead
The dishwasher meets the requirements set out by the regulations in
force concerning safety and electrical equipment.
Any technical checks should be conducted exclusively by a trained
and authorised technician: Repairs carried out by unaithorised
persons will invalidate the guarantee, as well as posing a potential
hazard to the user.
A lead can be ordered from Creda Service
UK: 08709 066 066 or
Republic of Ireland: 1850 302 220
If you have damaged the existing lead or require a longer one a
charge will be made. It is strongly advised that this work is carried out
by a qualified electrician.
The manufacturer declines all responsibility for damage to persons or
property resulting from failure to observe the above precautions, from
tampering with even a single component or from the use of non-
original spare parts.
If the domestic wiring includes a residual current-operated circuit
breaker, ensure that it conforms to the latest regulations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
For your Safety
Thismanualformsanintegralpartoftheappliance. Itmustalwaysbekepthandyforreference. Readthroughalltheinstructionscontainedinthismanual
beforeusingthedishwasher.
Installation must be performed by a qualified technician, in compliance
with the regulations in force, including the prevention and elimination of
radio frequency interference.
The dishwasher is designed for washing and drying dishes, any
other use shall be considered improper. The manufacturer declines
all responsibility for uses other than those described above.
1. Seperate the various 7. DO NOT install outdoors, not
packaging materials and
dispose of safely - DO NOT
leave discarded packaging
materialaroundthehome.
even if the area is covered by
a roof: it is extremely
dangeroustoleaveitexposed
torainandthunderstorms.
2. Afterremovingthepackaging, 8. If installed on a carpeted or
check to make sure your
appliance is intact. If in doubt,
covered floor, ensure that the
openingsontheundersideare
notobstructed.
contact
a
qualified
professional.
3. DONOTuse extensionleads
and multiple plugs. If the
9. Do not touch the heating
elementduringorstraightafter
a wash cycle.
electricity supply wire is not 10. Iftheappliancemalfunctions,
long enough, then have it
replacedwithoneofthecorrect
length and remember that it
should be free of bends or
dangerouskinks.
turnoffthewaterinlettapand
disconnecttheplugfromthe
wallsocket. Thenreadthe
sectionentitled
"Troubleshooting". Ifyou
cannotresolvetheproblem,
thencallCredaService(see
KEYCONTACTS,back
page).
4. In the event of any damage to
the power cord have it
replaced by a qualified
technician.
5. Themainsplugmustbeeasily
accessibleafterinstallation.
6. Iftheapplianceisnotoperating
properly or if maintenance
operations are necessary,
disconnect the dishwasher
from the mains power supply
(unplugit!).
Theratingplate,featuringthe
technicaldata,serialnumber
andmarkings, isvisibly
positionedontheinneredgeof
thedoor.
DONOTremovetheratingplate.
The dishwasher is intended for use by adults. DO NOT allow children
to come near or play with the controls.
Keep children away from detergents and clear of the dishwasher door
whenopen.
Keep all packaging material away from children.
1. DO NOT use solvents, such as alcohol or turpentine which may
causeanexplosion.
2. DONOTloaddishestowashthataresoiledwithash, waxorpaints.
3. DO NOT lean, sit or stand on any part of the dishwasher - this could
causeinjuryand/ordamagetheappliance.
4. DONOTdrinkanywaterresiduesfrominsidethedishwasher.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Installation
Cold water connection.
Choose where you want to install
your dishwasher, you can place it
so that its sides or back panel are
side by side with furniture or up
againstthewall. Thedishwasheris
providedwithwatersupplyanddrain
hoses, which can be directed
towards the left or right to facilitate
appropriateinstallation.
Drainhoseconnection.
SinkWasteSystem:
Forundersinkdrainage:
Connect the cold water supply
hose, inserting the small filter
supplied with the dishwasher and
makingsurethatitisfastenedtightly
in place (see figure 2). If the water
hosesareneworhavebeenoutof
useforanextendedperiodoftime,
let the water run to make sure it is
clear and free of impurities before
making the connection. If this
precaution is not taken, the water
inlet could get blocked, causing
damagetoyourdishwasher.
WARNING: Connect your
dishwasher drain hose to pipes
which connect to the foul drain
system and not to surface water
drains.
IMPORTANT: For the correct
operation of your dishwasher, it is
essentialtocomplywiththefollowing
information:-
Before connecting the drain hose,
remove any internal restrictions -
Thiswillpreventabuildupofdebris
whichcouldcauseablockage.
Remove any restrictions from the
waste spigot and ensure that the
sealingbungisremoved. Thehose
should be routed, such that it is
raised to a minimum height of
800mm(31/2”).
Levelling.
Once the appliance is positioned,
adjustthefeetbyscrewingthemin
or out depending on how high you
want it and to level it so that it is
horizontal. Make sure that it is not
inclinedmorethan2degrees. Ifthe
applianceislevel, itwill helpensure
itscorrectoperation.
Standpipe:
Ensurethatthehoseisnotpushed
toofardownthestandpipe.
Iftheendofyourdrainhoseisfitted
with‘retainingflaps’,ensuretheyare
insertedfullyintothestandpipe. This
will prevent the pipe from jumping
out during installation and use.
NOTE: Ensure the sink outlet
pipe has a minimum diamtere of
32mm.
HeightAdjustment
A
Insert the appliance into the cutout
andthenadjusttheheightusingthe
screwslocatedonthefrontbottom
part of the machine. Use a
screwdriver to turn the screws in
the clockwise or anti-clockwise
direction to increase or decrease
theheightrespectively.
Fig.2
DO NOT position the standpipe
near an electrical outlet.
ENSUREthatthedrainhoseisnot
kinked and it is routed as shown in
thediagram.
1. Untie the end of the GREY
drainage hose from the rear of
the appliance.
2. Reposition the ‘Hooked End
Support’ as required along the
GREYdrainagehose.
3. If fitting an under sink waste
disposal unit, cut out the
membrane, bung or blanking
plug.
4. Attach the GREY drainage
hose to the under sink waste
disposal unit securely, using the
clip and rubber tube supplied.
The standpipe should have a bore
of at least 38mm (11/2”). It should
be installed as shown, have a trap
fitted and must discharge into the
same drain system as your
householdsink.
It MUST NOT be connected to a
surfacewaterdrain.
Ensure the drain hose is
securely attached, to prevent
it coming away while the
machine is in use and causing
a flood.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Getting to know your Dishwasher
E. Upperbasket
I. Bottom spray arm
J. Salt container cap
K. Washingfilter
E
F. Top spray arm
G. Basket height adjuster
H. Lowerbasket
G
L. Detergent and rinse aid
dispenser
F
H
I
J
K
L
The Controls
A. ON-OFF Button
Press this button to switch the
appliance on.
B. ON-OFF Indicator light
This light informs you that the
dishwasher is on.
M
P
B
A
P. Wash Programme Selector
Each time this button is pressed,
one of the cycle indicator lights
“M” will come on in sequence.
M. Cycle indicator light
This light shows you which cycle
you have selected or the one in
progress.
Technical Characteristics
Thisdishwasherconformstothe
followingEuropeanCommunity
Directives:
Technical characteristics
Width
cm. 59,5
cm. 57
cm. 82
73/23/EECof19/02/73(Low
Voltage)andsubsequent
modifications;
Depth
89/336/EECof03/05/89
(Electromagnetic
Height
Compatibility)andsubsequent
modifications;
Capacity
12 standard place settings
20 KPa÷ 1MPa (0,2 ÷10 bar)
See data plate
97/17/CE
Mains water pressure
Power voltage
Total absorber power
Fuse
(Labelling)
See data plate
See data plate
6
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
How to use your Dishwasher
Modifying a wash cycle in
progress.
First of all.
- Turn on the water supply
tap completely.
- Add the correct amount of
detergent.
- Load the baskets correctly.
- Check that the spray arms
rotate freely.
Ifyouhavechosenthewrongcycle
- You can modify the wash cycle in
progress, if it has only just started.
Open the door carefully, to avoid
anyhotwatersplashes. Thenkeep
button "P" pressed in fro approxi-
mately 5 seconds, until you hear 3
shortbeeps.
- Close the door securely.
Indicatorlight"M"willgoouttoshow
all the settings will have been can-
celled. You are now free to re-set
the correct wash cycle.
-
Press the ON-OFF button "A":
indicator light "B" comes on. Your
appliance is now on and awaiting
instructions.
You've left out a dish?
Interruptthewashcyclebyopening
the door, carefully, then insert the
dishyouhadforgotten.
When you shut the door the cycle
will start up from where you inter-
ruptedit.
Select the wash cycle.
Select the wash cycle by pressing
button "P". Each time this button is
pressed, one of the indicator lights
“M”willcomeoninsequence.Select
thewashcyclemostsuitableforthe
type of dishes to wash (see ‘Pro-
gramme Chart’).
Cycle end
The end of the wash cycle is indi-
cated by 2 short beeps and the
flashing ofthewashcycleindicator
light“M”.
Closethedoorandafterafewsec-
onds,youwillhearashortbeep:the
wash cycle has started.
Openthedishwasherdoor.
Turn the appliance off by pressing
theON-OFFbutton“A”,thusswitch-
ing off the electricity supply.
Turn off the water tap.
Wait a few minutes before unload-
ing the dishes: they are very hot! If
youwaitalittlewhile, theydrybetter
due tothesteam.
Emptythelowerbasketfirst.
There's been a power
failure or you opened the
dishwasher door
The wash cycle stops and then
restartswhentheelectricitycomes
backonorwhenyouclosethedoor.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Programme Chart
Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:
3URJUDPPH
:KHQꢀ3URJUDPPH
VKRXOGꢀEHꢀXVHG
3URJUDPPHꢀ'HVFULSWLRQ
$PRXQWꢀRI
GHWHUJHQWꢀIRU
SUHꢁZDVKꢀꢂ
ZDVK
5LQVH
$LG
3UHꢄZDVKꢀZLWKꢀꢀFROGꢀZDWHU
3UHꢄZDVKꢀZLWKꢀKRWꢀZDWHUꢀDWꢀꢅꢆ&ꢃ
([WHQGHGꢀZDVKꢀDWꢀꢇꢈ&ꢃ
5LQVHꢀZLWKꢀFROGꢀZDWHUꢃ
5LQVHꢀZLWKꢀKRWꢀZDWHUꢀDWꢀꢇꢈ&ꢃ
'U\LQJꢃ
9HU\ꢀGLUW\ꢀGLVKHVꢀDQGꢀSDQV
ꢁQRWꢀWRꢀEHꢀXVHGꢀIRUꢀGHOLFDWH
LWHPVꢂꢃ
ꢀꢁꢂꢀꢃJUꢄ
ꢃ
ꢃ
+HDY\ꢀ'XW\
'DLO\ꢀF\FOH
ꢉꢀSUHꢄZDVKHVꢀZLWKꢀFROGꢀZDWHUꢃ
([WHQGHGꢀZDVKꢀDWꢀꢆꢈ&ꢃ
5LQVHꢀZLWKꢀKRWꢀZDWHUꢀDWꢀꢇꢈ&ꢃ
'U\LQJꢃ
1RUPDOO\ꢀGLUW\ꢀSDQVꢀDQG
GLVKHVꢃꢀ6WDQGDUGꢀGDLO\
F\FOHꢃ
ꢀꢁꢂꢀꢃJU
ꢂꢀꢃJUꢄ
(FRQRP\ꢀDQGꢀIDVWꢀF\FOHꢀWR
EHꢀXVHGꢀIRUꢀVOLJKWO\ꢀGLUW\
GLVKHVꢃ
5XQꢀF\FOHꢀLPPHGLDWHO\
DIWHUꢀXVHꢃꢀ1RꢀGU\LQJꢃ
6KRUWꢀZDVKꢀDWꢀꢅꢆ&ꢃ
&ROGꢀULQVH
R
5DSLG
3UHOLPLQDU\ꢀZDVKꢀF\FOHꢀIRU
GLVKHVꢀDQGꢀSDQVꢀDZDLWLQJ
FRPSOHWLRQꢀRIꢀWKHꢀORDGꢀZLWK
WKHꢀGLVKHVꢀIURPꢀWKHꢀQH[W
PHDOꢃ
6KRUWꢀFROGꢀZDVKꢀWRꢀSUHYHQWꢀIRRG
IURPꢀGU\LQJꢀRQWRꢀWKHꢀGLVKHVꢃ
6RDN
To optimise wash performance and save on energy, try yo use the dishwasher with a full wash load. If it takes some time to fill
your dishwasher, use the soak cycle to avoid caked on food and build up of bad odours.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Topreventrustfromforming,
loadthesaltjustbefore
beginningawashcycle.
Before Using your Dishwasher
Adjusting the water softener.
Your dishwasher can adjust its salt
consumptionaccordingtothehard-
ness of the water in your home.
This way, you can optimise and
customise your dishwasher's salt
consumption.
Water Hardness
Salt
Autono-
consu-
Clarke
Selector
position
my
°fH
mmol/l
mption
(grams/-
cycle)
degrees
(cycles\2-
kg)
To adjust salt consumption, do as
follows:
1. Unscrew the salt container cap
2. There is an arrow on the neck
of the container (see figure): if
necessary, turn the arrow anti-
clockwise from the "-" setting
to the "+" setting.
Select the arrow position
depending on the water
hardness, referring to the table.
0 - 14
0 - 17
0 -1,7
/
0
/
14 - 36 18 - 44 1,8 - 4,4
36 - 71 45 - 89 4,5 - 8,9
"-"
20
40
60
60
40
25
MED
"+"
>71
>89
> 8,9
You don't know how hard
the water in your home
is? Ask the company that
supplies water in your
area.
Salt
Filling the salt container.
Always use salt which is intended
for dishwasher use.
The salt container is situated
underneath the lower basket, fill it
up as follows:
1.Pull out the lower basket
completely, unscrew and
remove the container cap
2. If it is the first time you add the
salt, firstfillthecontainerupwith
water (you won't have to do this
againnexttime)
Low Salt indicator
This green device is located at the
centreofthecapforthedecalcifica-
tioncartridgeanditindicateswhether
thecontainerisfull.
When the indicator is not visible it
means that you need to add salt.
3. Putthedishwasherfunnelonthe
hole and pour in approximately
two kilos of salt. It is normal that
some water comes out of the
container.
4. Screw the cap back in place
carefully.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Before Using your Dishwasher
B
•
•
Use the right amount of
detergent (see programme
chart).
Store your detergent and rinse
aid in a cool, dry place, safely
away from children.
D
The detergent
C
Addingdetergent
ToopenlidA, pressbuttonB.
Thedetergentshouldbeputintothe
twocontainersCandD.
If using a tablet, put it in container
"D".
5 gr.
25 gr
.
Now you can close the lid: press it
down until you hear it click.
If it won't close
Check whether there is any
detergent residue on the edges of
thedispenser. Removetheexcess.
A
We recommend Glist 3 in 1 for use in all Creda dishwashers...
Brilliantcleaningisguaranteedwith Glist3in1.
CredaonlyrecommendsGlist3in1Dishwashertabletstogiveoutstandingcleaningandcare.
It is important to use detergent specially designed for domestic dishwashers. (Always follow the
manufacturersinstructions.)
Glist3in1 advanceddishwashertabletswithactiveenzymesaretheidealwaytoprotectandcarefor
yourdishwasher, whilegettingyourdishesandglassessparkingclean.
SofterWater:
Built in salt action softens water, helping to prevent the build up of limescale in the dishwasher and
improvethecleaningresult*.
CleanerDishes:
With unique active enzymes in the cleaning phase Glist 3 in 1 breaks down even the hard to shift
foodstuffsandgrease, leavingthedishesspotlessandthedishwashercleantoo.
SparklingResults:
*If you live in an area particularly
prone to very hard water ( 35°f)
Glist and Creda recommend that
you continue to keep your
dishwasher salt topped up.
The built-in Glist rinse agent ensures the dishes and glasses are free from water marks and smears.
If you have any questions regardingGlist3in1, please contact the hotline on 0800 216 730.
Rinse aid.
Rinse aid makes dishes sparkle
moreasitimprovestheirdrying.The
rinseaidcontainerissituatedonthe
inside of the appliance door, you
shouldrefillitwhenlight “D”indicates
thatitisempty.
F
C
- The amount of rinse aid
needs to be increased if the
dishes appear dull or you can
see circular stains.
- The amount of rinse aid
needs to be reduced if the
dishes are sticky or you can
see white streaks.
(If your dishwasher is fitted with a
“low rinse aid” indicator light, fill the
containerupwhentheindicatorlight
flashesorlightsup).
D
Addingrinseaid.
To open the dispenser, turn cap C
anticlockwise. Takecarewhenyou
pour in the rinse aid to avoid it
overflowing. You can regulate the
amount of rinse aid used by the
dishwasher, move the adjuster F
whichyouwillfindunderlidC.
You can choose from six different positions.
It is normally set to 4.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Loading your Dishwasher
Load examples
Afterloadingthedishes, remember
to check that the spray arms can
turnfreelywithouthittingagainstany
dishes.
First of all.
Beforeplacingdishesinthebaskets,
removeallcoursefoodremains.This
avoids blocking the filter, which
would reduce the efficiency of the
wash.
If saucepans and frying pans are
verydirty,allowthemtosoakbefore
beingwashed.
upperbasket
upperbasket
What goes into the upper
basket?
Placedelicateandlightweightdishes
in the upper basket: glasses, tea
cupsandcoffeecups, saucersand
plates-shallowsaladbowls,slightly
dirtyfryingpansandshallowpans.
Position lightweight dishes in such
aswayastoavoidtheirbeingmoved
by the spray of water.
Tomakeiteasiertoloadyourdishes,
pullthebasketsout.
What goes into the lower
basket?
Werecommendyouplacethemost
difficultdishestowashintothelower
basket: saucepans, lids, soup
dishes and plates (a load example
isshowninthephoto).
How to adjust the upper
basket.
Theupperbasketcanbesetinhigh
or low position to enable you to
organiseyourdisheseffortlessly.
lowerbasket
lowerbasket
•
Servingdishesandlargelids:
place them on the sides of the
basket.
•
•
Saucepans,saladbowls:must
alwaysbeplacedupsidedown
Very deep dishes: placethem
obliquely, thusallowingwaterto
run down them and cleaning
thembetter
1
2
3
Placethecutlerywiththehandlesat
the bottom; if the basket is the one
withsideinserts, theninsertthetea
spoons one by one into the slots.
Itisbestifyouplacelongerutensils
horizontallyatthefrontoftheupper
basket.
Fig.F
4
Open the rail stop flaps and pull
the basket out completely. Now
place it in high or low position,
then slide it along the guide rails
until the front wheels also go in.
Now close the rail stop flaps.
Follow the sequence of actions
illustrated in figure "F".
What can I Wash
Items not suitable for the dishwasher:
•
•
•
Cutleryandtablewaremadefromwoodorpartwood-Theymaybecomefadedandunsightlyinappearance.
Avoidwashinghornhandledandbronzecutleryinthemachine.
Delicate/decorative glassware and vases, special antique or irreplaceable china - the decorative patterns
printedontheseitemswillnotbedishwasherproof.
•
•
•
Plastic objects that are not resistant to hot water.
CopperandPewterutensils. AluminiumandSliverobjects.
Some types of glass can become opaque in appearance after they have been washed too many times in a
dishwasher.
•
•
Highlyabsorbentmaterialssuchasspongesandtowelsshouldneverbeplacedinadishwasher.
If in any doubt, check with the manufacturer on items suitability for dishwasher’s.
WARNING:Dishesorcutlerysoiledwithtobaccoash, wax, lubricatinggreaseorpaintshouldnotbeput
inthedishwasher.
Ourrecommendation:Infuture,onlypurchasetableorkitchenwarethathasbeenconfirmed-dishwasherproof.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Care and Cleaning
DONOTusesolventsorabrasives
tocleantheexteriorandrubberparts
of your appliance, do not use
solvents or abrasive cleaning
products. Useaclothdampened
withlukewarmsoapywateronly.
Ifthereareanystainsonthesurface
oftheapplianceinterior,useacloth
dampened with water and a little
whitevinegar,oracleaningproduct
specificallymadefordishwashers.
Unplug the appliance.
Cleaning the spray arms.
Goingaway
Beforecarryingoutanycleaningor Food residue may become
maintenanceonthedishwasher, encrustedontothesprayarmsand
always remove the plug from the blocktheholeswherewatercomes
Ifthedishwasherisnotgoingtobe
usedforsometime, carryoutthe
following:
electricitysocket.
out.Checkthesprayarmsregularly
andcleanthemonceinawhile.
• run a cycle with the dishwasher
empty.
• switchoffattheelectricalsocket
andunplug.
• turn off the water supply tap,
disconnect the inlet hose and
allowtodrain.
•filltherinseaiddispenser.
•leavethedoorajar,topreventthe
buildupofunpleasantodours
insidethedishwasher.
After every wash.
Whenthewashcyclehasended,
always remember to turn off the
watersupplytapandtoleavethe
appliance door ajar. This way,
moistureandbadodourswillnotbe
trappedinside.
Thefilterassembly
• Ifyouwantconsistentgoodresults
fromyourdishwasher,youneedto
cleanthefilterassembly.
• Removethelargerfoodparticles
trappedinsidethecup“C”andthe
semi-circular filter A after each
wash;pullthecuphandleupwards
to remove them. Just rinse them
underrunningwater.
• Theentirefilterassemblyshould
becleanedthoroughlyonceamonth:
cup C + semi-circular filter A +
cylindrical filter B. Rotate filter “B”
anticlockwisetoremoveit.
For cleaning, use a non metallic
brush.
Beforeusingthedishwasheraftera
longbreak,pluginandswitchonat
theelectricalsocket.Reconnectthe
inlet hose and turn on the water
supply tap. Check there are no
deposits of rust inside the water
pipe,ifthereareallowwatertorun
from the supply tap for a few
minutes.
Cleaning the Water Inlet
Filter
Periodicallycleanthewaterinletfilter
(see figure 2 under "Installation")
located on the outlet of the water
supplytap.Afterturningoffthewater
tap, unscrewtheendofthewater
supplyhose, removethefilterand
cleanitcarefullyunderrunningwater.
Then,returnthefiltertoitsplaceand
tightenthewatersupplyhoseback
intoposition.
Disconnectingthedishwasher.
Whendisconnectingthedishwasher
itisimportantthattasksarecarried
outinthecorrectsequence.
•switchoffatthemainsandremove
theplugfromthesocket.
• turnoffthewatersupply.
• disconnectdrainandwaterinlet
hose.
Theseals.
One of the factors that cause
unpleasantodourstoforminsidethe
dishwasher is food that remains
trapped in the seals. Periodic
cleaningusingadampspongewill
preventthisfromoccurring.
1
A
B
2
• pulloutthedishwasher,carefully,
withdrawinghosesatthesame
time.
C
Movingtheappliance.
Reassemble the filter parts (as
showninthefigure)andreinsertthe
whole assembly into the
dishwasher. Position it into its
housingandpressdownwards.
Thedishwasherisnottobeused
withoutfilters.Improperreplacement
of the filters may reduce the
efficiency of the wash and even
damageyourdishwasher.
Drainwaterfromthedishwasher.
Secure all loose parts. Only
transportinanuprightposition.
•Ifnotkeptuprightduringtransport,
anywaterremaininginsidemay
seepintothecontrolmoduleand
causesubsequenterrorswith
programmefunctions.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Troubleshooting
Caution
- Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable
equipment damage, as well as danger to the user.
- The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out.
Switch off at the mains socket and water supply and remove the plug.
Resolving minor problems yourself.
Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having
to call out a service engineer. Not only does this save costs but it also means the appliance is available for use again
that much sooner. The following list of common occurences and their remedies should help you identify the causes of
most problems.
If the dishwasher won't
start, check...
■ Isthedishwasherpluggedinat
the electricity socket and
switchedon?
■ Isthereapowerfailure, check
otherappliances.
■ Checkthefuse.
■ Is the water supply tap turned
on?
■ Isthewaterinlethoseconnected
properly?
■ Is the pressure of the water
supplysufficient?
If the dishes fail to dry or
remain dirty, check...
■ thereisrinseaidinsidetherinse
aidcontainer.
■ therinseaiddispensersettingis
correct.
■ the detergent being used is of
goodqualityandhasnotlostits
effectiveness (for example,
throughincorrectstorage, with
theboxleftopen).
If after all the checks, the appli-
ance still does not operate or the
problempersists, callCredaServ-
ice (see KEY CONTACTS, back
page)andinformthemof:
Error messages
Yourdishwasherisequippedwitha
safetysystemwhichisabletode-
tectoperatingfaults.
Thesefaultsarereportedbyoneor
twocycleindicatorlights"M"flash-
ingrapidly.Takeanoteofwhichlights
areflashing, turntheapplianceoff
andcallCredaServicefortechnical
assistance.
-thetypeofproblem
-theabbreviationofthemodel name
(Mod.)andtherelativenumbers
(S/N)writtenontheratingplate
located on the inner edge of
the door.
Tap off alarm
If the dishes show signs of
streaking, staining etc.
check...
Switch off at the mains socket
and remove the plug. Turn
off the water supply.
Ifyouhaveforgottentoturnthewa-
ter tap on, your appliance will re-
mindyouofthisbysoundingafew
shortbeepsforafewminutes.Turn
thetaponandyourappliancewill
startupagainafterafewminutes.
Wereyoutobeabsentwhenthese
beepsaresounded,theappliance
willbeblockedautomaticallyand
cycle2and3indicatorlights(daily
and rapidcycle)willflashrapidly.
Turn the appliance off at the ON-
OFFbutton, turnonthewatertap
andwaitapproximately20seconds
beforeturningtheapplianceback
on.
■ Istheinlethosekinked?
■ Isthefilteronthewatersupply
hoseblocked?
■ Isthedishwasherdoornotclosed
properly?
■ therinseaiddispensersettingis
notsettoohigh.
If there are visible traces
of rust inside the tank,
check...
■ thecapoffthesaltcontaineris
securely closed and that the
watersoftnersettingiscorrect.
■ thecorrectamountofdetergent
isbeingused.Certaindetergents
can be more corrosive than
others.
■ the tank is made of steel and
thereforeanyrustmarksaredue
toexternalelements(fragments
ofrustfromthetankpipes,pots,
cutleryetc.)Specialproductsare
commerciallyavailabletoremove
suchmarks.
If water remains inside the
dishwasher, check...
■ thedrainhoseisnotkinked.
■ the drain syphon is not
obstructed.
■ the dishwasher filters are not
clogged.
If the dishes are not being
cleaned properly, check...
■ thecorrectamountofdetergent
hasbeenadded.
■ thereisregeneratingsaltinthe
saltcontainer.
Re-selectthewashcycleandthe
appliancewillstartupagain.
■ the dishes have been loaded
correctly.
■ the selected programme is
suitableforthetypeofdishesand
thedegreeofsoiling.
■ allfiltersarecleanandpositioned
correctly.
■ the spray arm nozzles are not
obstructed.
■ thereisnothingobstructingthe
rotationofthesprayarms.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
INFORMATION FOR TEST LABS
Load for 12 Standard Settings tests (upper rack at top position)
Detergent
The rinse aid
Detergent specifically intended for use with dishwashers
must be used. The dispenser must be refilled before the
start of each wash cycle following the instructions provided
in the "Programme Chart". The detergent dispenser is
located on the inside panel of the door.
This product makes dishes sparkle more as it improves
their drying. The rinse aid container is situated on the inside
of the door, you should refill it when light “D” indicates that
it is empty.
(If your dishwasher is fitted with a “low rinse aid” indicator
light, fill the container up when the indicator light flashes or
lights up).
Loading the detergent
To open lid "A", press button "B". The cleaning detergent
should be introduced into the three containers "1", “2”and
“3”. "(see table at the end of the page)
After pouring in the detergent, replace the lid, pressing down
until it clicks.
Loading the Rinse Aid
To open the dispenser, turn the "C" cap in the anti-clockwise
direction and then pour in the rinse aid, making sure not to
overfill. The amount of rinse aid used for each cycle can be
regulated by turning the dose adjuster ‘F’ which you will find
under lid ‘C’.
There are 6 different settings; the normal dosage is setting
5.
D
B
F
Comp1
Comp2 Comp3
C
A
Comp.1
10
Comp.2
25
Comp.3
5
Cycle
Total detergent
30 gr.
See booklet
EN 50242
IEC/ DIN
30 gr.
20
See booklet
To use the Normal or daily wash cycles (See Programm Chart in the instruction booklet)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Notes
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Contacts
After Sales Service
Over 1200 trained specialists, directly employed by us, ensure that you can have complete
confidence in both the appliances and services we offer.
Repair Service and Information Desk
UK: 08709 066 066
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number:
Serial number:
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Sun)
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
Republic of Ireland: (01) 842 6836
General Domestic Appliances Limited, Morley Way, Peterborough, PE2 9JB.
195.036.728.00
January 2003 Part no. FP187 - 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|